The function has no dependency on SCSI/FCP, so rename it to
fnic_fcpio_reset() and move it to fnic_fcs.c
Tested-by: Karan Tilak Kumar <kartilak@cisco.com>
Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com>
Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Reviewed-by: Gian Carlo Boffa <gcboffa@cisco.com>
Reviewed-by: Arun Easi <aeasi@cisco.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
Co-developed-by: Hannes Reinecke <hare@kernel.org>
Link: https://patch.msgid.link/20260217223943.7938-3-kartilak@cisco.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
One cannot use the GFP_ZERO flag for mempool allocation, so use
memset() instead.
Tested-by: Karan Tilak Kumar <kartilak@cisco.com>
Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com>
Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Reviewed-by: Gian Carlo Boffa <gcboffa@cisco.com>
Reviewed-by: Arun Easi <aeasi@cisco.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
Co-developed-by: Hannes Reinecke <hare@kernel.org>
Link: https://patch.msgid.link/20260217223943.7938-2-kartilak@cisco.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The receive frames are constantly replenished so we should rather use a
mempool here.
fip_frame_queue is an rxq. Deallocate it in fnic_free_rxq().
Tested-by: Karan Tilak Kumar <kartilak@cisco.com>
Reviewed-by: Sesidhar Baddela <sebaddel@cisco.com>
Reviewed-by: Arulprabhu Ponnusamy <arulponn@cisco.com>
Reviewed-by: Gian Carlo Boffa <gcboffa@cisco.com>
Reviewed-by: Arun Easi <aeasi@cisco.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Karan Tilak Kumar <kartilak@cisco.com>
Co-developed-by: Hannes Reinecke <hare@kernel.org>
Link: https://patch.msgid.link/20260217223943.7938-1-kartilak@cisco.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
ntfs_lock_new_page() currently returns a struct page * but it primarily
operates on folios via __filemap_get_folio(). Convert it to return a
struct folio * and use folio_alloc() + __folio_set_locked() for the
temporary page used to avoid data corruption during decompression.
When the cached folio is not uptodate, preserve the existing behavior by
using folio_file_page() and converting the returned page back to a
folio.
Update ni_readpage_cmpr() and ni_decompress_file() to handle the new
return type while keeping the existing struct page * array and the
unlock_page()/put_page() cleanup paths unchanged.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202602072013.jwrURE2e-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202602071921.nGIiI1J5-lkp@intel.com/
Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com>
[almaz.alexandrovich@paragon-software.com: removed ni_fiemap function,
added reported-by and closes tags to commit]
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Previously the comparator was stored in struct ntfs_index and
used by low-level helpers such as hdr_find_e(). This creates
a dependency on index state in private helpers.
Resolve the compare function in the public index APIs and pass
it explicitly to internal helpers.
This should make the ownership of the comparator explicit and keeps
low-level index code independent of index-root policy.
This also resolves the TODO comment about dropping the stored
comparator from struct ntfs_index.
Signed-off-by: Adarsh Das <adarshdas950@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
ntfs_read_mft() counts file name attributes into two variables:
names (all names including DOS 8.3) and links (non-DOS names
only). The validation at line 424 checks names but set_nlink()
at line 436 uses links. A corrupted NTFS image where all file
name attributes have type FILE_NAME_DOS passes the names check
but results in set_nlink(inode, 0).
When such an inode is loaded via a code path that passes name=NULL
to ntfs_iget5() and the nlink=0 inode enters the VFS. The subsequent
unlink, rmdir, or rename targeting this inode calls drop_nlink()
which triggers WARN_ON(inode->i_nlink == 0) in fs/inode.c.
An all-DOS-name MFT record cannot exist on a valid NTFS volume.
Reject such records by checking for links == 0 before
calling set_nlink().
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Currently tail calling a non-existent prog results in tailcall count
increment. This is what the interpreter is doing, but this is clearly
wrong, so replace load-and-increment and compare-and-jump with load
and compare-and-jump, conditionally followed by increment and store.
Reported-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20260217161058.101346-1-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The UFSHCI 4.1 specification introduces a new completion queue (CQ) entry
format, allowing the tag to be obtained directly.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260210071834.1837878-1-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
It is difficult to debug situations where an MCQ command timeout occurs,
the corresponding CQ tag response is received, but the request is not
completed. Add a one-line log to indicate when the CQ entry is abnormal.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260210070837.1820710-3-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
It is difficult to debug when a UIC command timeout occurs simultaneously
with a UIC command complete interrupt. Currently, we only see the timeout
log without any debug information, making it unclear whether the UFS device
failed to respond or the host entered an incorrect state. Add a one-line
log to cover this situation.
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260210070837.1820710-2-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Any SQE read should use READ_ONCE(), to ensure the result is read once
and only once. Doesn't really matter for this case, but it's better to
keep these 100% consistent and always use READ_ONCE() for the prep side
of SQE handling.
Fixes: 5d24321e4c ("io_uring: Introduce getsockname io_uring cmd")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, tailcall count is incremented in the interpreter even when
tailcall fails due to non-existent prog. Fix this by holding off on
the tailcall count increment until after NULL check on the prog.
Suggested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Link: https://lore.kernel.org/r/20260220062959.195101-1-hbathini@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Replace pr_err() calls with dev_err() using &pdev->dev or
&sm750_dev->pdev->dev to provide proper device context in log
messages. This makes it easier to identify which device generated
the message when multiple framebuffer devices are present.
Signed-off-by: Artem Lytkin <iprintercanon@gmail.com>
Link: https://patch.msgid.link/20260223204036.1780-3-iprintercanon@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove all pr_info, pr_debug, and pr_warn calls that dump internal
variable values, pointer addresses, and structure contents not useful
for production use. This includes the complete fb_find_mode() result
logging in lynxfb_set_fbinfo(), the CH7301 DVI chip status messages
in hw_sm750_inithw(), and various debug prints throughout the driver.
Signed-off-by: Artem Lytkin <iprintercanon@gmail.com>
Link: https://patch.msgid.link/20260223204036.1780-2-iprintercanon@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix multi-line block comment to use the preferred kernel comment style
with leading asterisks on each line and a trailing */ on a separate
line, as reported by checkpatch.pl.
Signed-off-by: Kibaek Yoo <psykibaek@gmail.com>
Reviewed-by: Ethan Tidmore <ethantidmore06@gmail.com>
Link: https://patch.msgid.link/20260224044946.54022-1-psykibaek@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Justin Tee <justintee8345@gmail.com> says:
Update lpfc to revision 14.4.0.14
This patch set contains updates to log messaging, trivial typecast and
pointer changes, bug fixes related to kref accounting and cleanup
handling, an update to a WQE submission bitfield, and restriction of
first burst to specific HBAs only.
The patches were cut against Martin's 6.20/scsi-queue tree.
Link: https://patch.msgid.link/20260212213008.149873-1-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
First burst is only supported on adapters running in SLI4 mode and that
are non-FCoE based. Include sli_rev and FCoE mode checks before setting
the write transfer ready disabled bit in PRLIs.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260212213008.149873-12-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
WQE submissions only require a 3 bit field when specifying the class of
service to use. So, update WQE submission paths to use a 3 bit field
instead of 0x0f as the bit mask. A NLP_FCP_CLASS_MASK bitmask is
defined to ensure only a 3 bit mask is used.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260212213008.149873-11-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When handling a PCI function reset, notification to the NVMe transport
layer is skipped for outstanding aborted NVMe I/O. Introduce a new
routine called lpfc_nvme_flush_abts_list(), which notifies upper NVMe
transport layer of outstanding aborted NVMe I/O that are not planned to
be completed normally due to a PCI function reset request.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260212213008.149873-10-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When a port is offline in lpfc_sli_abort_ring, the phba->txcmplq is
cleared but the phba->txcmplq_cnt is not reset to zero. This can
sometimes result in a phba->txcmplq_cnt that never reaches zero, which
hangs the cleanup process.
Update lpfc_sli_abort_ring so that txcmplq_cnt is reset to zero and also
ensure that the LPFC_IO_ON_TXCMPLQ flag is properly cleared.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260212213008.149873-9-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Error labels in lpfc_fdmi_cmd() accidentally return success status and
can potentially leak memory. Change error exit path status to return a
non-zero value using a common exit path for failure cases. The error
path also frees allocated memory and provides logging.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260212213008.149873-8-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When NLP_IN_RECOV_POST_DEV_LOSS is set, the initial node reference
remains held while recovery is in progress. Taking a reference when
NLP_IN_RECOV_POST_DEV_LOSS is cleared results in an additional reference
being held. This causes an extra reference when cleaning up lpfc_vport
instances. Thus, remove the extraneous ndlp kref get in
lpfc_check_nlp_post_devloss.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260212213008.149873-7-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For all FLOGI completions, the vport->phba->pport pointer is actually a
pointer to the original vport pointer because FLOGIs always complete on
the physical lpfc_vport object. Thus, we can reduce the
vport->phba->pport->vmid_flag dereference to simply vport->vmid_flag.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260212213008.149873-6-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The member called cfg_sg_dma_buf_size is declared as a u32, while the
min comparator's second argument called SLI4_PAGE_SIZE is a #define.
Proper comparison should be using the same type, therefore change to use
min_t.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260212213008.149873-5-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Should fabric login or related initialization mailbox commands fail,
there are no log messages to notify which step encountered an issue.
Update error label paths to log when unexpected fabric login issues
occur.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260212213008.149873-4-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
An RCQE with statuses indicating that an RQE is dropped or when there
are insufficient buffers to receive new RQEs are currently occuring
silently. Add a new log message to warn when such events occur.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260212213008.149873-3-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If kref_get_unless_zero on ndlp->kref is unsuccessful, then there's no
point to log kref_read(&ndlp->kref) because it will of course be zero.
In such cases, ndlp->vport would also be an invalid pointer. Thus, use
pr_info() instead of lpfc_printf_vlog() to log when a kref get is
attempted on an ndlp with a zero kref.
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20260212213008.149873-2-justintee8345@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The current code checks 'i + 5 < in_len' at the end of the if statement.
However, it accesses 'in_ie[i + 5]' before that check, which can lead
to an out-of-bounds read. Move the length check to the beginning of the
conditional to ensure the index is within bounds before accessing the
array.
Fixes: 554c0a3abf ("staging: Add rtl8723bs sdio wifi driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Luka Gejak <luka.gejak@linux.dev>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/20260224132647.11642-2-luka.gejak@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Correct the kernel-doc notation, add a missing struct member comment,
and add a missing "Returns:" function comment to eliminate kernel-doc
warnings:
Warning: drivers/gpu/drm/sun4i/sunxi_engine.h:116 Incorrect use of
kernel-doc format: * @mode_set
Warning: drivers/gpu/drm/sun4i/sunxi_engine.h:125 struct member 'mode_set'
not described in 'sunxi_engine_ops'
Warning: drivers/gpu/drm/sun4i/sunxi_engine.h:144 struct member 'list'
not described in 'sunxi_engine'
Warning: drivers/gpu/drm/sun4i/sunxi_engine.h:168 No description found
for return value of 'sunxi_engine_layers_init'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Link: https://patch.msgid.link/20260219215524.468142-1-rdunlap@infradead.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Reorder struct sched_ext_entity to place ops_state, ddsp_dsq_id, and
ddsp_enq_flags immediately after dsq. These fields are accessed together
in the do_enqueue_task() and finish_dispatch() hot paths but were
previously spread across three different cache lines. Grouping them on
the same cache line reduces cache misses on every enqueue and dispatch
operation.
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The function drm_atomic_get_plane_state() can return an error pointer
and is not checked for it. Add error pointer check.
Detected by Smatch:
drivers/gpu/drm/sun4i/sun4i_backend.c:496 sun4i_backend_atomic_check() error:
'plane_state' dereferencing possible ERR_PTR()
Fixes: 96180dde23 ("drm/sun4i: backend: Add a custom atomic_check for the frontend")
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Link: https://patch.msgid.link/20260217014801.60760-1-ethantidmore06@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Use metricgroup__for_each_metric rather than
pmu_metrics_table__for_each_metric that combines the default metric
table with, a potentially empty, CPUID table.
Fixes: cee275edcd ("perf metricgroup: Don't early exit if no CPUID table exists")
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Tested-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The "Read backward ring buffer" test crashes on big-endian (e.g. s390x)
due to a NULL dereference when the backward mmap path isn't enabled.
Reproducer:
# ./perf test -F 'Read backward ring buffer'
Segmentation fault (core dumped)
# uname -m
s390x
#
Root cause:
get_config_terms() stores into evsel_config_term::val.val (u64) while later
code reads boolean fields such as evsel_config_term::val.overwrite.
On big-endian the 1-byte boolean is left-aligned, so writing
evsel_config_term::val.val = 1 is read back as
evsel_config_term::val.overwrite = 0,
leaving backward mmap disabled and a NULL map being used.
Store values in the union member that matches the term type, e.g.:
/* for OVERWRITE */
new_term->val.overwrite = 1; /* not new_term->val.val = 1 */
to fix this. Improve add_config_term() and add two more parameters for
string and value. Function add_config_term() now creates a complete node
element of type evsel_config_term and handles all evsel_config_term::val
union members.
Impact:
Enables backward mmap on big-endian and prevents the crash.
No change on little-endian.
Output after:
# ./perf test -Fv 44
--- start ---
Using CPUID IBM,9175,705,ME1,3.8,002f
mmap size 1052672B
mmap size 8192B
---- end ----
44: Read backward ring buffer : Ok
#
Fixes: 159ca97cd9 ("perf parse-events: Refactor get_config_terms() to remove macros")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Jan Polensky <japo@linux.ibm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Acked-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add the missing Kconfig file to tools/sched_ext/ as referenced in
the README.
Ref: https://github.com/sched-ext/scx/blob/main/kernel.config
Signed-off-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Sync the documentation with the upstream scx repository to
reflect the current recommended configuration.
Ref: https://github.com/sched-ext/scx/blob/main/README.md#build--install
Signed-off-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Add a devres-managed version of spi_new_ancillary_device() that
automatically unregisters the ancillary SPI device when the parent
device is removed.
This follows the same devm_add_action_or_reset() pattern used by the
other managed SPI functions (devm_spi_optimize_message,
devm_spi_register_controller, etc.) and eliminates the need for drivers
to open-code their own devm cleanup callbacks for ancillary devices.
Acked-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Link: https://patch.msgid.link/20260223162110.156746-3-antoniu.miclaus@analog.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The devm_of_iomap() function returns an ERR_PTR() encoded error code on
failure. Replace the incorrect check against NULL with IS_ERR().
Fixes: 05cd654829 ("irqchip/ls-extirq: Convert to a platform driver to make it work again")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Link: https://patch.msgid.link/20260224113610.1129022-3-ioana.ciornei@nxp.com
Closes: https://lore.kernel.org/all/aYXvfbfT6w0TMsXS@stanley.mountain/
This reverts commit 3ac6dfe3d7.
The ls-extirq uses interrupt-map but it's a non-standard use documented
in fsl,ls-extirq.yaml:
# The driver(drivers/irqchip/irq-ls-extirq.c) have not use standard DT
# function to parser interrupt-map. So it doesn't consider '#address-size'
# in parent interrupt controller, such as GIC.
#
# When dt-binding verify interrupt-map, item data matrix is spitted at
# incorrect position. Remove interrupt-map restriction because it always
# wrong.
This means that by using for_each_of_imap_item and the underlying
of_irq_parse_imap_parent() on its interrupt-map property will effectively
break its functionality
Revert the patch making use of for_each_of_imap_item() in ls-extirq.
Fixes: 3ac6dfe3d7 ("irqchip/ls-extirq: Use for_each_of_imap_item iterator")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Link: https://patch.msgid.link/20260224113610.1129022-2-ioana.ciornei@nxp.com
The i915_active selftest no longer builds after the dma-fence locking
rework because it directly accessed the fence’s spinlock. The helper
dma_fence_spinlock() must now be used to obtain the spinlock. Update the
selftest to use dma_fence_spinlock() accordingly.
Fixes: 1f32f310a1 ("dma-buf: inline spinlock for fence protection v5")
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20260223172553.1663749-1-matthew.brost@intel.com
In bq257xx_reg_dt_parse_gpio(), if fails to get subchild, it returns
without calling of_node_put(child), causing the device node reference
leak.
Fixes: 981dd162b6 ("regulator: bq257xx: Add bq257xx boost regulator driver")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Link: https://patch.msgid.link/20260224-bq257-v1-1-8ebbc731c1c3@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In fp9931_hwmon_read(), if regmap_read() failed, the function returned
the error code without calling pm_runtime_put_autosuspend(), causing
a PM reference leak.
Fixes: 12d821bd13 ("regulator: Add FP9931/JD9930 driver")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://patch.msgid.link/20260224-fp9931-v1-1-1cf05cabef4a@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
