The kernel-doc for drm_gpusvm_pages_valid_unlocked() was stale and still
referenced old range-based arguments and naming. Update the documentation
to match the current function arguments and signature.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/20260219205029.1011336-1-matthew.brost@intel.com
We are no longer using LM_FLAG_TRY or LM_FLAG_TRY_1CB during inode
evict, so ret cannot be GLR_TRYFAILED here.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Move the link recovery trigger from ufshcd_uic_pwr_ctrl() to
__ufshcd_wl_resume(). Ensure link recovery is only attempted when hibern8
exit fails during resume, not during hibern8 enter in suspend. Improve
error handling and prevent unnecessary link recovery attempts.
Fixes: 35dabf4503 ("scsi: ufs: core: Use link recovery when h8 exit fails during runtime resume")
Signed-off-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260223103906.2533654-1-peter.wang@mediatek.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ixora boards have multiple instances of status leds, to avoid a name
collision add the function-enumerator property.
This fixes the following Linux kernel warnings:
leds-gpio leds: Led green:status renamed to green:status_1 due to name collision
leds-gpio leds: Led red:status renamed to red:status_1 due to name collision
Fixes: c083131c90 ("arm64: dts: freescale: add apalis imx8 aka quadmax carrier board support")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
No pci_enable_ptm() callers supply the "granularity" pointer where the
clock granularity would be returned.
Drop the unused pci_enable_ptm() parameter.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://patch.msgid.link/20260224111044.3487873-5-mika.westerberg@linux.intel.com
The GPU is supported since Linux v6.9, with changes in the SoC dtsi
file. Remove the related obsolete TODO comment.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Enable lpuart6 for Bluetooth support.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Enable lpuart5 for Bluetooth support.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
The audmix is not used on apalis imx8, disable it.
This solves the following warning message
imx-audmix imx-audmix.0: failed to find SAI platform device
imx-audmix imx-audmix.0: probe with driver imx-audmix failed with error -22
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Enable lpuart5 on imx95-19x19-evk board for Bluetooth support.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
For i.MX93 11x11 EVK and 9x9 QSB boards, add the gpio-hog to enable the
M.2 PCM pins level shifter connected between soc sai1 interface and M.2
PCM pins so that HFP feature can be supported.
Since the HFP is only used at a later stage — after the BT firmware has
been downloaded and the BT connection with the remote device has been
established — both the pcal6524 expander and sai1 interface are already
fully initialized and available by that time. Therefore, using a
gpio-hog here will not introduce any probe ordering or dependency issues
for the HFP use case.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
When the PRCM clk driver was added, somehow the r-spi module clock
was skipped over.
Add it so that r-spi can actually work.
Fixes: 8cea339cfb ("clk: sunxi-ng: add support for the A523/T527 PRCM CCU")
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20260217093004.3239051-1-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Add required OF nodes to support the i.MX93 parallel output (DPI) path.
On the i.MX93 a single LCDIF is connected to three bridges: DPI, LVDS
LDB and the MIPI-DSI whereas the i.MX91 support only the DPI bridge.
Map endpoint@0 as DPI bridge output since the i.MX93 TRM (Figure 485.
MEDIAMIX block diagram) doesn't mention any port-number <-> bridge
combination.
Set the MEDIA-AXI and MEDIA-APB clocks to the overdrive (OD) values
since the i.MX93 and i.MX91 use the overdrive (OD) clk settings per
default.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
The bpftool_maps_access and bpftool_metadata tests may fail on BPF CI
with "command not found", depending on a workflow.
This happens because detect_bpftool_path() only checks two hardcoded
relative paths:
- ./tools/sbin/bpftool
- ../tools/sbin/bpftool
Add support for a BPFTOOL environment variable that allows specifying
the exact path to the bpftool binary.
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260223191118.655185-2-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- kmem_cache_iter: remove unnecessary debug output
- lwt_seg6local: change the type of foobar to char[]
- the sizeof(foobar) returned the pointer size and not a string
length as intended
- verifier_log: increase prog_name buffer size in verif_log_subtest()
- compiler has a conservative estimate of fixed_log_sz value, making
ASAN complain on snprint() call
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260223191118.655185-1-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Compiler cannot infer upper bound for labels.cnt and warns about
potential buffer overflow in snprintf. Add an explicit bounds
check (... && i < MAX_LOCAL_LABELS) in the loop condition to fix the
warning.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260223190736.649171-18-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
ASAN reported a resource leak due to the bpf_object not being tracked
in test_sysctl. Add obj field to struct sysctl_test to properly clean
it up.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260223190736.649171-17-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
ASAN reported a "joining already joined thread" error. The
release_child() may be called multiple times for the same struct
child.
Fix by resetting child->thread to 0 after pthread_join.
Also memset(0) static child variable in test_attach_api().
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260223190736.649171-15-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
ASAN reported a use-after-free in close_xsk().
The xsk->socket internally references xsk->umem via socket->ctx->umem,
so the socket must be deleted before the umem. Fix the order of
operations in close_xsk().
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260223190736.649171-14-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The Close() macro uses the passed in expression three times, which
leads to repeated execution in case it has side effects. That is,
Close(i--) would decrement i three times.
ASAN caught a stack-buffer-undeflow error at a point where this was
overlooked. Fix it.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260223190736.649171-12-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
ASAN reported a memory leak in bpf_get_ksyms(): it allocates a struct
ksyms internally and never frees it.
Move struct ksyms to trace_helpers.h and return it from the
bpf_get_ksyms(), giving ownership to the caller. Add filtered_syms and
filtered_cnt fields to the ksyms to hold the filtered array of
symbols, previously returned by bpf_get_ksyms().
Fixup the call sites: kprobe_multi_test and bench_trigger.
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260223190736.649171-10-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a denylist file for tests that should be skipped when built with
userspace ASAN:
$ make ... SAN_CFLAGS="-fsanitize=address -fno-omit-frame-pointer"
Skip the following tests:
- *arena*: userspace ASAN does not understand BPF arena maps and gets
confused particularly when map_extra is non-zero
- non-zero map_extra leads to mmap with MAP_FIXED, and ASAN treats
this as an unknown memory region
- task_local_data: ASAN complains about "incorrect" aligned_alloc()
usage, but it's intentional in the test
- uprobe_multi_test: very slow with ASAN enabled
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260223190736.649171-9-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Running resolve_btfids with ASAN reveals memory leaks in btf_id
handling.
- Change get_id() to use a local buffer
- Make btf_id__add() strdup the name internally
- Add btf_id__free_all() that frees all nodese of a tree
- Call the cleanup function on exit for every tree
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260223190736.649171-8-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
EXTRA_* and SAN_* build flags were not correctly propagated to bpftool
and resolve_btids when building selftests/bpf. This led to various
build errors on attempt to build with SAN_CFLAGS="-fsanitize=address",
for example.
Fix the makefiles to address this:
- Pass SAN_CFLAGS/SAN_LDFLAGS to bpftool and resolve_btfids build
- Propagate EXTRA_LDFLAGS to resolve_btfids link command
- Use pkg-config to detect zlib and zstd for resolve_btfids, similar
libelf handling
Also check for ASAN flag in selftests/bpf/Makefile for convenience.
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260223190736.649171-7-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Replace strncpy() with memcpy() in cases where the source is
non-NULL-terminated and the copy length is known.
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260223190736.649171-6-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For temporary field allocation, the user has to perform manual cleanup,
or rely on devm_regmap_field_alloc() to (eventually) clean up the
allocated resources when an error occurs.
Add a cleanup helper that takes care of freeing the allocated
regmap_field whenever it goes out of scope.
This can simplify this example:
struct regmap_field *field = regmap_field_alloc(...);
if (IS_ERR(field))
return PTR_ERR(field);
int err = regmap_field_read(...);
if (err)
goto out;
/* some logic that may also error */
err = regmap_field_write(...);
out:
regmap_field_free(field);
return err;
into the shorter:
struct regmap_field *field __free(regmap_field) = regmap_field_alloc(...);
if (IS_ERR(field))
return PTR_ERR(field);
int err = regmap_field_read(...);
if (err)
return err;
/* some logic that may also error */
return regmap_field_write(...);
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Link: https://patch.msgid.link/20260220160112.543391-2-sander@svanheule.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Sort the included headers to make spotting duplicates easier and avoid
discussions on where to add new includes.
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Link: https://patch.msgid.link/20260220160112.543391-1-sander@svanheule.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the SoundWire ID for CS47L47 to the class driver.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20260223150256.326143-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a device info entry for the Cirrus Logic CS47L47.
CS47L47 has UAJ (headset speaker + mic + jack detect) and DMICs.
The audio ports are similar to the CS42L45 so can be based on the
CS42L45 code.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20260223150256.326143-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The CXL decoder flags are defined as bitmasks, not bit indices.
Using test_bit() to check them interprets the mask value as a bit
index, which is the wrong test.
For CXL_DECODER_F_NORMALIZED_ADDRESSING the test reads beyond the
flags word, making the flag sometimes appear set and blocking creation
of CXL region debugfs attributes that support poison operations.
Replace test_bit() with a bitmask check.
Found with cxl-test.
Fixes: 208f432406 ("cxl: Disable HPA/SPA translation handlers for Normalized Addressing")
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Gregory Price <gourry@gourry.net>
Tested-by: Gregory Price <gourry@gourry.net>
Link: https://patch.msgid.link/63fe4a6203e40e404347f1cdc7a1c55cb4959b86.1771873256.git.alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
The CXL decoder flags are defined as bitmasks, not bit indices.
Using test_bit() to check them interprets the mask value as a bit
index, which is the wrong test.
For CXL_DECODER_F_LOCK the test reads beyond the defined bits, causing
the test to always return false and allowing resets that should have
been blocked.
Replace test_bit() with a bitmask check.
Fixes: 2230c4bdc4 ("cxl: Add handling of locked CXL decoder")
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Gregory Price <gourry@gourry.net>
Tested-by: Gregory Price <gourry@gourry.net>
Link: https://patch.msgid.link/98851c4770e4631753cf9f75b58a3a6daeca2ea2.1771873256.git.alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Found issue during running of cxl-translate.sh unit test. Adding a 3s
sleep right before the test seems to make the issue reproduce fairly
consistently. The cxl_translate module has dependency on cxl_acpi and
causes orphaned nvdimm objects to reprobe after cxl_acpi is removed.
The nvdimm_bus object is registered by the cxl_nvb object when
cxl_acpi_probe() is called. With the nvdimm_bus object missing,
__nd_device_register() will trigger NULL pointer dereference when
accessing the dev->parent that points to &nvdimm_bus->dev.
[ 192.884510] BUG: kernel NULL pointer dereference, address: 000000000000006c
[ 192.895383] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20250812-19.fc42 08/12/2025
[ 192.897721] Workqueue: cxl_port cxl_bus_rescan_queue [cxl_core]
[ 192.899459] RIP: 0010:kobject_get+0xc/0x90
[ 192.924871] Call Trace:
[ 192.925959] <TASK>
[ 192.926976] ? pm_runtime_init+0xb9/0xe0
[ 192.929712] __nd_device_register.part.0+0x4d/0xc0 [libnvdimm]
[ 192.933314] __nvdimm_create+0x206/0x290 [libnvdimm]
[ 192.936662] cxl_nvdimm_probe+0x119/0x1d0 [cxl_pmem]
[ 192.940245] cxl_bus_probe+0x1a/0x60 [cxl_core]
[ 192.943349] really_probe+0xde/0x380
This patch also relies on the previous change where
devm_cxl_add_nvdimm_bridge() is called from drivers/cxl/pmem.c instead
of drivers/cxl/core.c to ensure the dependency of cxl_acpi on cxl_pmem.
1. Set probe_type of cxl_nvb to PROBE_FORCE_SYNCHRONOUS to ensure the
driver is probed synchronously when add_device() is called.
2. Add a check in __devm_cxl_add_nvdimm_bridge() to ensure that the
cxl_nvb driver is attached during cxl_acpi_probe().
3. Take the cxl_root uport_dev lock and the cxl_nvb->dev lock in
devm_cxl_add_nvdimm() before checking nvdimm_bus is valid.
4. Set cxl_nvdimm flag to CXL_NVD_F_INVALIDATED so cxl_nvdimm_probe()
will exit with -EBUSY.
The removal of cxl_nvdimm devices should prevent any orphaned devices
from probing once the nvdimm_bus is gone.
[ dj: Fixed 0-day reported kdoc issue. ]
[ dj: Fix cxl_nvb reference leak on error. Gregory (kreview-0811365) ]
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Fixes: 8fdcb1704f ("cxl/pmem: Add initial infrastructure for pmem support")
Tested-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com?>
Link: https://patch.msgid.link/20260205001633.1813643-3-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
As per sram bindings, "sram" property can be list of phandles.
When more than one sram phandles are listed, driver can't parse second
phandle's address correctly. Because, phandle index is passed to the API
instead of offset of address from reg property which is always 0 as per
sram.yaml bindings. Fix it by passing 0 to the API instead of sram
phandle index.
Fixes: 77fcdf51b8 ("remoteproc: xlnx: Add sram support")
Signed-off-by: Tim Michals <tcmichals@yahoo.com>
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Link: https://lore.kernel.org/r/20260204202730.3729984-1-tanmay.shah@amd.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Return early in it87_resume() if it87_lock() fails instead of ignoring the
return value of that function. This patch suppresses a Clang thread-safety
warning.
Cc: Frank Crawford <frank@crawford.emu.id.au>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: linux-hwmon@vger.kernel.org
Fixes: 376e1a937b ("hwmon: (it87) Add calls to smbus_enable/smbus_disable as required")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20260223220102.2158611-15-bart.vanassche@linux.dev
[groeck: Declare 'ret' at the beginning of it87_resume()]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
As stated in the da0a672268 ("spi: dw: Remove not-going-to-be-supported
code for Baikal SoC") the Baikal platforms are not supported and
the respective driver code was removed. Remove the currently unused bindings.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260224115218.3499222-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The current netlink and /proc interfaces deviate from their traditional
values when dynamic threading is enabled, and there is currently no way
to know what the current setting is. This patch brings the reporting
back in line with traditional behavior.
Make these interfaces report the requested maximum number of threads
instead of the number currently running. Also, update documentation and
comments to reflect that this value represents a maximum and not the
number currently running.
Fixes: d8316b837c ("nfsd: add controls to set the minimum number of threads per pool")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
This reverts commit 443b39c82c.
I was just informed that this product is discontinued (without being
ever released to the market). Pull the plug and let's not waste any more
maintainers time.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Link: https://lore.kernel.org/r/20260223100459.844967-4-mwalle@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Using Tegra234, it was found that it takes about 10us to disable clocks
and 20us to enable clocks, adding about 30us overhead per operation.
For a 4MB firmware update with 16,384 page programs, this results in
~491ms total overhead (12% impact).
With Tegra234, flash operations were observed to occur in bursts with
50-200μs gaps between page programs. Testing on Tegra234 with various
operation patterns shows 500ms delay provides optimal balance, and for
longer operations (>500ms), the overhead is negligible. Therefore,
update the driver to use pm-runtime autosuspend with the default timeout
of 500ms to reduce the clock gating overhead during consecutive QSPI
transfers.
Signed-off-by: Vishwaroop A <va@nvidia.com>
Link: https://patch.msgid.link/20260224092452.1482800-1-va@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This just removes any explicit imports of items in files that are already
being pulled in by `use prelude::*;`.
There should be no functional changes in this patch.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260122214316.3281257-2-lyude@redhat.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
