Add the compatible for MSS as found on the MSM8940 platform.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Link: https://lore.kernel.org/r/20260107-mss-v4-8-9f4780345b6f@mainlining.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for MSM8937 MSS it is similar to MSM8917 MSS.
It differs primarily in that TZ needs to be informed of
the modem start address and pas_id.
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260107-mss-v4-7-9f4780345b6f@mainlining.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the compatible for MSS as found on the MSM8937 platform.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Link: https://lore.kernel.org/r/20260107-mss-v4-6-9f4780345b6f@mainlining.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for MSM8917 MSS it is similar for MDM9607 MSS
only difference is the mss supply.
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260107-mss-v4-5-9f4780345b6f@mainlining.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the compatible for MSS as found on the MSM8917 platform.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Link: https://lore.kernel.org/r/20260107-mss-v4-4-9f4780345b6f@mainlining.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for MDM9607 MSS it have different ACC settings
and it needs mitigation for inrush current issue.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
[Reword the commit, add necessary flags, rework inrush current mitigation]
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260107-mss-v4-3-9f4780345b6f@mainlining.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the compatible for MSS as found on the MDM9607 platform.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Link: https://lore.kernel.org/r/20260107-mss-v4-2-9f4780345b6f@mainlining.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Some platforms like MSM8953 and MSM8937 TZ needs to be
informed of the modem start address and pas_id.
Lets introduce need_pas_mem_setup flag for handle this case.
Reviewed-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260107-mss-v4-1-9f4780345b6f@mainlining.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Commit c70b9d5fdc ("remoteproc: qcom: Use of_reserved_mem_region_*
functions for "memory-region"") switched from devm_ioremap_wc() to
devm_ioremap_resource_wc(). The difference is devm_ioremap_resource_wc()
also requests the resource which fails. Testing of both fixed and
dynamic reserved regions indicates that requesting the resource should
work, so I'm not sure why it doesn't work in this case. Fix the issue by
reverting back to devm_ioremap_wc().
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: André Apitzsch <git@apitzsch.eu>
Fixes: c70b9d5fdc ("remoteproc: qcom: Use of_reserved_mem_region_* functions for "memory-region"")
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: André Apitzsch <git@apitzsch.eu> # on BQ Aquaris M5
Link: https://lore.kernel.org/r/20260128220243.3018526-1-robh@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The addition of dmabuf support in uverbs means that it is no
longer possible to build infiniband support if that is disabled:
arm-linux-gnueabi-ld: drivers/infiniband/core/ib_core_uverbs.o: in function `rdma_user_mmap_entry_remove.part.0':
ib_core_uverbs.c:(.text+0x508): undefined reference to `dma_buf_move_notify'
(dma_buf_move_notify): Unknown destination type (ARM/Thumb) in drivers/infiniband/core/ib_core_uverbs.o
ib_core_uverbs.c:(.text+0x518): undefined reference to `dma_resv_wait_timeout'
(dma_resv_wait_timeout): Unknown destination type (ARM/Thumb) in drivers/infiniband/core/ib_core_uverbs.o
Select this from Kconfig, as we do for the other users.
Fixes: 0ac6f4056c ("RDMA/uverbs: Add DMABUF object type and operations")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260216121213.2088910-1-arnd@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Kernel-doc requires all lines within a documentation
comment to start with " *". The previous empty line
caused a "bad line" warning during build.
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Mario Limonciello <superm1@kernel.org>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: ChiaHsuan Chung <chiahsuan.chung@amd.com>
Cc: Roman Li <roman.li@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the existing helper instead of multiplying the size.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the existing helper instead of multiplying the size.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SDMA 7.0 has increased transfer limits.
v2: fix harder, use shifts to make it more obvious
Cc: Vitaly Prosyak <vitaly.prosyak@amd.com>
Reviewed-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SDMA 6.x has increased transfer limits.
v2: fix harder, use shifts to make it more obvious
Cc: Vitaly Prosyak <vitaly.prosyak@amd.com>
Reviewed-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SDMA 5.2.x has increased transfer limits.
v2: fix harder, use shifts to make it more obvious
v3: align const fill with PAL limits
v4: re-align with hw limits
Cc: Vitaly Prosyak <vitaly.prosyak@amd.com>
Reviewed-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SDMA 4.4.x has increased transfer limits.
v2: fix harder, use shifts to make it more obvious
Cc: Vitaly Prosyak <vitaly.prosyak@amd.com>
Reviewed-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SDMA 4.4.x has increased transfer limits.
v2: fix harder, use shifts to make it more obvious
Cc: Vitaly Prosyak <vitaly.prosyak@amd.com>
Reviewed-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along the follwing updates:
- Add visualconfirm support for refresh rate change testing.
- Fix IPS exit with DC helper for all dc_set_power_state cases.
- Fix cursor position at overlay plane edges on DCN4.
- Introduce DMUB IHC command.
- Add missing dprefclk and dtbclk clock types and fix formatting.
- Fix DPIA number and driver ID field sizes per spec.
- Minor code fixes.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
Add the missing dprefclk and dtbclk clock types to the enum.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
We should check for != zstate disallow and programming extend blank from a
different struct.
Reviewed-by: Leo Chen <leo.chen@amd.com>
Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Resolve type mismatch warnings by ensuring loop counters and compared
values use matching unsigned types (size_t or int) in array iteration.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The DPIA number field is 6 bits in the spec.
In dp_type, it only defines 5 bits.
The driver ID is only 4 bits in the spec.
[How]
Set DPIA number field size to 6.
And only update 4 bits for driver id.
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Cruise Hung <Cruise.Hung@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
On DCN4, when cursor straddles the left/top edge of an overlay plane, the
recout-relative position becomes negative. These negative values wrap
to large positive numbers when cast to uint32_t, causing the cursor on the
the overlay plane to disappear.
Fix by adding hotspot adjustment and position clamping after the
recout-relative calculation, matching the existing ODM/MPC slice
boundary handling.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
On D3 path during dc_set_power_state, we may be in idle_allowed=true,
at which point we will exit idle via dc_wake_and_execute_dmub_cmd_list
which doesn't update dc->idle_optimizations_allowed to false. This
would cause any future attempts to allow idle optimizations via the DC
helper to get skipped because the value is stale and not reflective of
the actual HW state.
Move dc_exit_ips_for_hw_access() to the top of the function.
Additionally ensure that dc_power_down_on_boot thread holds the DC
lock and only runs if there are 0 streams.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Xgmi link status is unavailable in guest. This patch returns
AMDGPU_XGMI_LINK_NA for VFs.
Signed-off-by: Simon Louis <simon.louis@amd.com>
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The module loader doesn't check for bounds of the ELF section index in
simplify_symbols():
for (i = 1; i < symsec->sh_size / sizeof(Elf_Sym); i++) {
const char *name = info->strtab + sym[i].st_name;
switch (sym[i].st_shndx) {
case SHN_COMMON:
[...]
default:
/* Divert to percpu allocation if a percpu var. */
if (sym[i].st_shndx == info->index.pcpu)
secbase = (unsigned long)mod_percpu(mod);
else
/** HERE --> **/ secbase = info->sechdrs[sym[i].st_shndx].sh_addr;
sym[i].st_value += secbase;
break;
}
}
A symbol with an out-of-bounds st_shndx value, for example 0xffff
(known as SHN_XINDEX or SHN_HIRESERVE), may cause a kernel panic:
BUG: unable to handle page fault for address: ...
RIP: 0010:simplify_symbols+0x2b2/0x480
...
Kernel panic - not syncing: Fatal exception
This can happen when module ELF is legitimately using SHN_XINDEX or
when it is corrupted.
Add a bounds check in simplify_symbols() to validate that st_shndx is
within the valid range before using it.
This issue was discovered due to a bug in llvm-objcopy, see relevant
discussion for details [1].
[1] https://lore.kernel.org/linux-modules/20251224005752.201911-1-ihor.solodrai@linux.dev/
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Add build number, version and date to the existing part number print.
Example:
[drm] ATOM BIOS: 113-PN000108-103, build: 00159017, ver: 022.040.003.043.000001, 2025/07/27
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Store the start wptr and ib size in the IB fence. On queue
reset, save the ring contents of all IBs.
For reemit, reemit the entire IB state for non-guilty contexts.
For guilty contexts, replace the IB submission with nops, but reemit
the rest. Split the reemit per fence and when we reemit, update the
wptr with the new values from reemit. This allows us to reemit jobs
repeatedly as the wptrs get properly updated each time.
v2: further simplify the logic
v3: reemit vm state, not just vm fence
v4: just nop the IB and possibly the VM portion of the submission
v5: simplify the vm fence check
v6: split the vm and ib fences
v7: fix commit message
v8: use wptr rather than count_dw to calculate offsets
v9: fix missing documenation update spotted by the kernel test robot
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add DM ipblock for DCN 4.2.0
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for DCN 4.2 in Display Manager
Signed-off-by: Roman Li <Roman.Li@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for DCN 4.2 in Display Core
Signed-off-by: Roman Li <Roman.Li@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable DMUB support for DCN 4.2
Signed-off-by: Roman Li <Roman.Li@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DMUB support for DCN 4.2
Signed-off-by: Roman Li <Roman.Li@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Register headers for the following IPs:
- DCN 4.2.0
- DPCS 4.0.0
Signed-off-by: Roman Li <Roman.Li@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Now that DC supports external DP bridge encoders,
it has reached feature parity with the legacy non-DC display
driver on CIK APUs: Kaveri, Kabini, Mullins.
Use the DC display driver by default on SI APUs, unless it is
explicitly disabled using the amdgpu.dc=0 module parameter.
DC brings proper support for DP/HDMI audio, DP MST, VRR,
10-bit colors, some HDR features, atomic modesetting, etc.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the pre-existing implementation in the BIOS parser, but call
the ExternalEncoderControl function for external encoders instead
of the built-in DAC load detection function.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement link creation for external DP bridge encoders
such as NUTMEG and TRAVIS used with CIK APUs such as
Kaveri for supporting analog and LVDS connections.
Typically found in CIK APU based laptops or on FM2
motherboards that have analog connectors.
When we query connector information from the VBIOS and
discover a connector using such an encoder, let's find the
real DisplayPort encoder and use that. Set the connector
signal type to DP, so the pre-existing DP code paths can
work with it without refactoring every signal type check
in the DC code base.
In the DM, make sure to report correct connector type and
also to initialize DP specifics such as the AUX channel.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Deal with some minor idiosyncracies of TRAVIS and NUTMEG chips.
- Always use DP signal type with these chips so that the
normal DP code paths can work with them without a major
refactor of the code base. Properly set this.
- NUTMEG seems to only work with HBR, not RBR, so set a
preferred link rate for this chip.
See amdgpu_atombios_dp_get_dp_link_config() for reference.
- NUTMEG is recognized as a DP branch device but reports 0 sinks,
which is wrong and confuses DC (it hits an early return).
Fix that by hardcoding the sink count to 1.
- Fixup old DC code selecting a special panel mode necessary
for NUTMEG and TRAVIS.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some GPUs use external DP bridge encoders NUTMEG and TRAVIS
to implement analog and/or LVDS connections. Typically found in
CIK APU based laptops or on FM2 motherboards that have analog
connectors. These were necessary at the time because Kaveri
didn't have a built-in DAC nor LVDS support.
These devices sadly don't work transparently and need to be
controlled by the driver. Implement the necessary control for
the NUTMEG and TRAVIS encoders in the DCE HWSS.
For reference, see the legacy non-DC amdgpu display code:
amdgpu_atombios_encoder_setup_external_encoder()
amdgpu_atombios_encoder_setup_dig()
amdgpu_atombios_encoder_setup_ext_encoder_ddc()
- Prepare DDC before using it:
Call the EXTERNAL_ENCODER_CONTROL_DDC_SETUP action so that
the encoder knows to set up DDC over the AUX channel.
- When a stream is enabled or disabled:
Call the EXTERNAL_ENCODER_CONTROL_ENABLE/DISABLE actions.
- Before enabling the DP link:
Call the EXTERNAL_ENCODER_CONTROL_SETUP action.
This commit just hooks up the HWSS support.
Detecting the external DP bridge encoders will be done in
a subsequent commit.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The DisplayPort code already has the concept of preferred link
settings, but it only allows setting a preferred lane count and
link width at the same time. It does not consider the possiblity
that some devices may not work on lower link rates but may
support various lane counts.
Allow specifying a preferred link rate which will be used as
the initial link rate when deciding the DP link settings.
This is necessary to support NUTMEG which only works with HBR
but not with RBR.
For reference, see the legacy non-DC amdgpu display code:
amdgpu_atombios_dp_get_dp_link_config()
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make it possible to add a HWSS function to prepare the DDC
before trying to use it. This is going to be necessary for
external DP bridge encoders.
This commit just adds the function to common DC code.
The actual implementation of this function for DCE is
done in a subsequent commit.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DDC probe means that we use the DDC (Display Data Channel) to
verify whether a display is connected or not.
This was written with mainly analog connectors in mind, so it
didn't work over the AUX channel. However, in order to support
external DP bridge encoders found in CIK APUs, it needs to work
over the AUX channel too.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The VBIOS has a function called ExternalEncoderControl which
controls the DP bridge encoders that some GPUs use for analog
and LVDS output. Fixup this old functionality.
For reference, see the legacy non-DC amdgpu display code:
amdgpu_atombios_encoder_setup_external_encoder()
- Set same parameters for the ENABLE action as the SETUP action
- Add missing enum values for DDC setup and DAC load detection
- Fix the bits per color field
- Clarify the code that sets the link rate
- Expose the function so that it can be called by rest of DC
A subsequent commit will call this function from DCE HWSS.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
