The .invalidate_mapping() callback is documented as optional, yet it
effectively became mandatory whenever importer_ops were provided. This
led to cases where RDMA non-ODP code had to supply an empty stub.
Relax the checks in the dma-buf core so the callback can be omitted,
allowing RDMA code to drop the unnecessary function.
Removing the stub allows the next patch to tell that RDMA does not support
.invalidate_mapping() by checking for a NULL op.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20260131-dmabuf-revoke-v7-5-463d956bd527@nvidia.com
Moving the symbol devm_cxl_add_nvdimm_bridge() to
drivers/cxl/cxl_pmem.c, so that cxl_pmem can export a symbol that gives
cxl_acpi a depedency on cxl_pmem kernel module. This is a prepatory patch
to resolve the issue of a race for nvdimm_bus object that is created
during cxl_acpi_probe().
No functional changes besides moving code.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com?>
Link: https://patch.msgid.link/20260205001633.1813643-2-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
This driver runs also on other Tegra SoCs (e.g. Tegra234).
Replace Kconfig dependency on Tegra194 with more generic dependency on
Tegra, and amend the Kconfig help text to reflect the fact that this
driver works on SoCs other than Tegra194.
Fixes: b003fb5c9d ("hte: Add Tegra234 provider")
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Acked-by: Dipen Patel <dipenp@nvidia.com>
Signed-off-by: Dipen Patel <dipenp@nvidia.com>
This patch continues the effort to refactor workqueue APIs, which has begun
with the changes introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
The point of the refactoring is to eventually alter the default behavior of
workqueues to become unbound by default so that their workload placement is
optimized by the scheduler.
Before that to happen after a careful review and conversion of each individual
case, workqueue users must be converted to the better named new workqueues with
no intended behaviour changes:
system_wq -> system_percpu_wq
system_unbound_wq -> system_dfl_wq
This way the old obsolete workqueues (system_wq, system_unbound_wq) can be
removed in the future.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Dipen Patel <dipenp@nvidia.com>
Add bluetooth dts node.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Add uart1 and bluetooth node.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Correct the spdif compatible string to "fsl,imx8mm-spdif".
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
The header <unistd.h> is included twice in rt_stall.c. Remove the
redundant inclusion to clean up the code.
Signed-off-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The '-f' option is defined in getopt() but not handled in the switch
statement or documented in the help text. Providing '-f' currently
triggers the default error path.
Remove it to sync the optstring with the actual implementation.
Signed-off-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The '-p' option is defined in getopt() but not handled in the switch
statement or documented in the help text. Providing '-p' currently
triggers the default error path.
Remove it to sync the optstring with the actual implementation.
Signed-off-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The read() call in run_test() triggers a warn_unused_result compiler
warning, which breaks the build under -Werror.
Check the return value of read() and exit the child process on failure to
satisfy the compiler and handle pipe read errors.
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The module Kconfig file contains a set of options related to "Module
versioning support" (depends on MODVERSIONS) and "Module signature
verification" (depends on MODULE_SIG). The Kconfig tool automatically
creates submenus when an entry for a symbol is followed by consecutive
items that all depend on the symbol. However, this functionality doesn't
work for the mentioned module options. The MODVERSIONS options are
interleaved with ASM_MODVERSIONS, which has no 'depends on MODVERSIONS' but
instead uses 'default HAVE_ASM_MODVERSIONS && MODVERSIONS'. Similarly, the
MODULE_SIG options are interleaved by a comment warning not to forget
signing modules with scripts/sign-file, which uses the condition 'depends
on MODULE_SIG_FORCE && !MODULE_SIG_ALL'.
The result is that the options are confusingly shown when using
a menuconfig tool, as follows:
[*] Module versioning support
Module versioning implementation (genksyms (from source code)) --->
[ ] Extended Module Versioning Support
[*] Basic Module Versioning Support
[*] Source checksum for all modules
[*] Module signature verification
[ ] Require modules to be validly signed
[ ] Automatically sign all modules
Hash algorithm to sign modules (SHA-256) --->
Fix the issue by using if/endif to group related options together in
kernel/module/Kconfig, similarly to how the MODULE_DEBUG options are
already grouped. Note that the signing-related options depend on
'MODULE_SIG || IMA_APPRAISE_MODSIG', with the exception of
MODULE_SIG_FORCE, which is valid only for MODULE_SIG and is therefore kept
separately. For consistency, do the same for the MODULE_COMPRESS entries.
The options are then properly placed into submenus, as follows:
[*] Module versioning support
Module versioning implementation (genksyms (from source code)) --->
[ ] Extended Module Versioning Support
[*] Basic Module Versioning Support
[*] Source checksum for all modules
[*] Module signature verification
[ ] Require modules to be validly signed
[ ] Automatically sign all modules
Hash algorithm to sign modules (SHA-256) --->
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
In the error path of load_module(), under the free_module label, the
code calls lockdep_free_key_range() to release lock classes associated
with the MOD_DATA, MOD_RODATA and MOD_RO_AFTER_INIT module regions, and
subsequently invokes module_deallocate().
Since commit ac3b432839 ("module: replace module_layout with
module_memory"), the module_deallocate() function calls free_mod_mem(),
which releases the lock classes as well and considers all module
regions.
Attempting to free these classes twice is unnecessary. Remove the
redundant code in load_module().
Fixes: ac3b432839 ("module: replace module_layout with module_memory")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Reviewed-by: Aaron Tomlin <atomlin@atomlin.com>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Add compatible string fsl,imx25-aips to fix below CHECK_DTBS warnings:
arch/arm/boot/dts/nxp/imx/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dtb: /soc/bus@43f00000/bridge@43f00000: failed to match any schema with compatible: ['fsl,imx25-aips']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20260211221529.3745404-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Patches which both remove and add/modify DT binding files are
incorrectly flagged as needing to split the patch. The issue is the
check sees "dev/null" as one of the files in the patch which is not a DT
binding file. Add "dev/null" to the skipped files.
Link: https://patch.msgid.link/20260121212715.144495-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The default_gfp() helper that I added is not wrong, but it turns out
that it causes unnecessary headaches for 'sparse' which doesn't support
the use of __VA_OPT__ (introduced in C++20 and C23, and supported by gcc
and clang for a long time).
We do already use __VA_OPT__ in some other cases in the kernel (drm/xe
and btrfs), but it has been fairly limited. Now it triggers for pretty
much everything, and sparse ends up not working at all.
We can use the traditional gcc ',##__VA_ARGS__' syntax instead: it may
not be the "C standard" way and is slightly less natural in this
context, but it is the traditional model for this and avoids the sparse
problem.
Reported-and-tested-by: Ricardo Ribalda <ribalda@chromium.org>
Reported-and-tested-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reported-by: Ben Dooks <ben.dooks@codethink.co.uk>
Fixes: e19e1b480a ("add default_gfp() helper macro and use it in the new *alloc_obj() helpers")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The count field in the command header is used to determine the valid
payload size. Verify that the valid payload does not exceed the remaining
buffer space.
Fixes: aac243092b ("accel/amdxdna: Add command execution")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260219211946.1920485-1-lizhi.hou@amd.com
The ubuf size calculation may overflow, resulting in an undersized
allocation and possible memory corruption.
Use check_add_overflow() helpers to validate the size calculation before
allocation.
Fixes: bd72d4acda ("accel/amdxdna: Support user space allocated buffer")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260217192815.1784689-1-lizhi.hou@amd.com
The remaining space in a command slot may be smaller than the size of
the command header. Clearing the command header with memset() before
verifying the available slot space can result in an out-of-bounds write
and memory corruption.
Fix this by moving the memset() call after the size validation.
Fixes: 3d32eb7a5e ("accel/amdxdna: Fix cu_idx being cleared by memset() during command setup")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260217185415.1781908-1-lizhi.hou@amd.com
When a hardware context is suspended, the job scheduler is stopped. If a
command is submitted while the context is suspended, the job is queued in
the scheduler but aie2_sched_job_run() is never invoked to restart the
hardware context. As a result, the command hangs.
Fix this by modifying the hardware context suspend routine to keep the job
scheduler running so that queued jobs can trigger context restart properly.
Fixes: aac243092b ("accel/amdxdna: Add command execution")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260211205341.722982-1-lizhi.hou@amd.com
Enabling turbo mode disables hardware clock gating. Suspend requires
hardware clock gating to be re-enabled, otherwise suspend will fail.
Fix this by calling aie2_runtime_cfg() from aie2_hw_stop() to
re-enable clock gating during suspend. Also ensure that firmware is
initialized in aie2_hw_start() before modifying clock-gating
settings during resume.
Fixes: f4d7b8a6bc ("accel/amdxdna: Enhance power management settings")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260211204716.722788-1-lizhi.hou@amd.com
When an application issues a query IOCTL while auto suspend is running,
a deadlock can occur. The query path holds dev_lock and then calls
pm_runtime_resume_and_get(), which waits for the ongoing suspend to
complete. Meanwhile, the suspend callback attempts to acquire dev_lock
and blocks, resulting in a deadlock.
Fix this by releasing dev_lock before calling pm_runtime_resume_and_get()
and reacquiring it after the call completes. Also acquire dev_lock in the
resume callback to keep the locking consistent.
Fixes: 063db45183 ("accel/amdxdna: Enhance runtime power management")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260211204644.722758-1-lizhi.hou@amd.com
During process termination, several error messages are logged that are
not actual errors but expected conditions when a process is killed or
interrupted. This creates unnecessary noise in the kernel log.
The specific scenarios are:
1. HMM invalidation returns -ERESTARTSYS when the wait is interrupted by
a signal during process cleanup. This is expected when a process is
being terminated and should not be logged as an error.
2. Context destruction returns -ENODEV when the firmware or device has
already stopped, which commonly occurs during cleanup if the device
was already torn down. This is also an expected condition during
orderly shutdown.
Downgrade these expected error conditions from error level to debug level
to reduce log noise while still keeping genuine errors visible.
Fixes: 97f2757383 ("accel/amdxdna: Fix potential NULL pointer dereference in context cleanup")
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260210164521.1094274-3-mario.limonciello@amd.com
If userspace issues an ioctl to destroy a hardware context that has
already been automatically suspended, the driver may crash because the
mailbox channel pointer is NULL for the suspended context.
Fix this by checking the mailbox channel pointer in aie2_destroy_context()
before accessing it.
Fixes: 97f2757383 ("accel/amdxdna: Fix potential NULL pointer dereference in context cleanup")
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260206060306.4050531-1-lizhi.hou@amd.com
Preempt commands are only supported when submitted as chained commands.
To ensure preempt support works consistently, always submit commands in
chained command format.
Set force_cmdlist to true so that single commands are filled using the
chained command layout, enabling correct handling of preempt commands.
Fixes: 3a0ff7b98a ("accel/amdxdna: Support preemption requests")
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260206060251.4050512-1-lizhi.hou@amd.com
Large command buffers may be used, and they do not always need to be
mapped or accessed by the driver. Performing a size check at command BO
creation time unnecessarily rejects valid use cases.
Remove the buffer size check from command BO creation, and defer vmap
and size validation to the paths where the driver actually needs to map
and access the command buffer.
Fixes: ac49797c18 ("accel/amdxdna: Add GEM buffer object management")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260206060237.4050492-1-lizhi.hou@amd.com
The runner sets exit_req on SIGINT/SIGTERM but ignores it during the
main loop. This prevents users from cleanly interrupting a test run.
Check exit_req each iteration to safely break out on exit signals.
Signed-off-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
CPUs whose rq only have SCHED_IDLE tasks running are considered to be
equivalent to truly idle CPUs during wakeup path. For fork and exec
SCHED_IDLE is even preferred.
This is based on the assumption that the SCHED_IDLE CPU is not in an
idle state and might be in a higher P-state, allowing the task/wakee
to run immediately without sharing the rq.
However this assumption doesn't hold if the wakee has SCHED_IDLE policy
itself, as it will share the rq with existing SCHED_IDLE tasks. In this
case, we are better off continuing to look for a truly idle CPU.
On a Intel Xeon 2-socket with 64 logical cores in total this yields
for kernel compilation using SCHED_IDLE:
+---------+----------------------+----------------------+--------+
| workers | mainline (seconds) | patch (seconds) | delta% |
+=========+======================+======================+========+
| 1 | 4384.728 ± 21.085 | 3843.250 ± 16.235 | -12.35 |
| 2 | 2242.513 ± 2.099 | 1971.696 ± 2.842 | -12.08 |
| 4 | 1199.324 ± 1.823 | 1033.744 ± 1.803 | -13.81 |
| 8 | 649.083 ± 1.959 | 559.123 ± 4.301 | -13.86 |
| 16 | 370.425 ± 0.915 | 325.906 ± 4.623 | -12.02 |
| 32 | 234.651 ± 2.255 | 217.266 ± 0.253 | -7.41 |
| 64 | 202.286 ± 1.452 | 197.977 ± 2.275 | -2.13 |
| 128 | 217.092 ± 1.687 | 212.164 ± 1.138 | -2.27 |
+---------+----------------------+----------------------+--------+
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://patch.msgid.link/20260203184939.2138022-1-christian.loehle@arm.com
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
For more details see the Link tag below.
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
Switch to using system_dfl_wq because system_unbound_wq is going away as part of
a workqueue restructuring.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/
Link: https://patch.msgid.link/20251107092452.43399-1-marco.crivellari@suse.com
For RT and DL thread, only 'set_next_task_(rt/dl)' will call
'update_stats_wait_end_(rt/dl)' to update schedstats information.
However, during the migration process,
'update_stats_wait_start_(rt/dl)' will be called twice, which
will cause the values of wait_max and wait_sum to be incorrect.
The specific output as follows:
$ cat /proc/6046/task/6046/sched | grep wait
wait_start : 0.000000
wait_max : 496717.080029
wait_sum : 7921540.776553
A complete schedstats information update flow of migrate should be
__update_stats_wait_start() [enter queue A, stage 1] ->
__update_stats_wait_end() [leave queue A, stage 2] ->
__update_stats_wait_start() [enter queue B, stage 3] ->
__update_stats_wait_end() [start running on queue B, stage 4]
Stage 1: prev_wait_start is 0, and in the end, wait_start records the
time of entering the queue.
Stage 2: task_on_rq_migrating(p) is true, and wait_start is updated to
the waiting time on queue A.
Stage 3: prev_wait_start is the waiting time on queue A, wait_start is
the time of entering queue B, and wait_start is expected to be greater
than prev_wait_start. Under this condition, wait_start is updated to
(the moment of entering queue B) - (the waiting time on queue A).
Stage 4: the final wait time = (time when starting to run on queue B)
- (time of entering queue B) + (waiting time on queue A) = waiting
time on queue B + waiting time on queue A.
The current problem is that stage 2 does not call __update_stats_wait_end
to update wait_start, which causes the final computed wait time = waiting
time on queue B + the moment of entering queue A, leading to incorrect
wait_max and wait_sum.
Add 'update_stats_wait_end_(rt/dl)' in 'update_stats_dequeue_(rt/dl)' to
update schedstats information when dequeue_task.
Signed-off-by: Dengjun Su <dengjun.su@mediatek.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260204115959.3183567-1-dengjun.su@mediatek.com
With EAS, a group should be set overloaded if at least 1 CPU in the group
is overutilized but it can happen that a CPU is fully utilized by tasks
because of clamping the compute capacity of the CPU. In such case, the CPU
is not overutilized and as a result should not be set overloaded as well.
group_overloaded being a higher priority than group_misfit, such group can
be selected as the busiest group instead of a group with a mistfit task
and prevents load_balance to select the CPU with the misfit task to pull
the latter on a fitting CPU.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Pierre Gondois <pierre.gondois@arm.com>
Link: https://patch.msgid.link/20260206095454.1520619-1-vincent.guittot@linaro.org
Checking uclamp_min is useless and counterproductive for overutilized state
as misfit can now happen without being in overutilized state.
Since commit e5ed0550c0 ("sched/fair: unlink misfit task from cpu overutilized")
util_fits_cpu returns -1 when uclamp_min is above capacity which is not
considered as cpu overutilized.
Remove the useless rq_util_min parameter.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Qais Yousef <qyousef@layalina.io>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/20260213101751.3121899-1-vincent.guittot@linaro.org
Since we now use the full weight for avg_vruntime(), also make
__calc_delta() use the full value.
Since weight is effectively NICE_0_LOAD, this is 20 bits on 64bit.
This leaves 44 bits for delta_exec, which is ~16k seconds, way longer
than any one tick would ever be, so no worry about overflow.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: Shubhang Kaushik <shubhang@os.amperecomputing.com>
Link: https://patch.msgid.link/20260219080625.183283814%40infradead.org
Zicheng Qu reported that, because avg_vruntime() always includes
cfs_rq->curr, when ->on_rq, place_entity() doesn't work right.
Specifically, the lag scaling in place_entity() relies on
avg_vruntime() being the state *before* placement of the new entity.
However in this case avg_vruntime() will actually already include the
entity, which breaks things.
Also, Zicheng Qu argues that avg_vruntime should be invariant under
reweight. IOW commit 6d71a9c616 ("sched/fair: Fix EEVDF entity
placement bug causing scheduling lag") was wrong!
The issue reported in 6d71a9c616 could possibly be explained by
rounding artifacts -- notably the extreme weight '2' is outside of the
range of avg_vruntime/sum_w_vruntime, since that uses
scale_load_down(). By scaling vruntime by the real weight, but
accounting it in vruntime with a factor 1024 more, the average moves
significantly. However, that is now cured.
Tested by reverting 66951e4860 ("sched/fair: Fix update_cfs_group()
vs DELAY_DEQUEUE") and tracing vruntime and vlag figures again.
Reported-by: Zicheng Qu <quzicheng@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: Shubhang Kaushik <shubhang@os.amperecomputing.com>
Link: https://patch.msgid.link/20260219080625.066102672%40infradead.org
Due to the zero_vruntime patch, the deltas are now a lot smaller and
measurement with kernel-build and hackbench runs show about 45 bits
used.
This ensures avg_vruntime() tracks the full weight range, reducing
numerical artifacts in reweight and the like.
Also, lets keep the paranoid debug code around fow now.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: Shubhang Kaushik <shubhang@os.amperecomputing.com>
Link: https://patch.msgid.link/20260219080624.942813440%40infradead.org
It turns out that a few workloads (easyWave, fio) have a fairly low
success rate on newidle balance, but still benefit greatly from having
it anyway.
Luckliky these workloads have a faily low newidle rate, so the cost if
doing the newidle is relatively low, even if unsuccessfull.
Add a simple rate based part to the newidle ratio compute, such that
low rate newidle will still have a high newidle ratio.
This cures the easyWave and fio workloads while not affecting the
schbench numbers either (which have a very high newidle rate).
Reported-by: Mario Roy <marioeroy@gmail.com>
Reported-by: "Mohamed Abuelfotoh, Hazem" <abuehaze@amazon.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Mario Roy <marioeroy@gmail.com>
Tested-by: "Mohamed Abuelfotoh, Hazem" <abuehaze@amazon.com>
Link: https://patch.msgid.link/20260127151748.GA1079264@noisy.programming.kicks-ass.net
The clk_dp_ops are supposed to be used for DP-related clocks with a
proper MND divier. Use standard RCG2 ops for dptx1_aux_clk_src, the same
as all other DPTX AUX clocks in this driver.
Fixes: 16fb89f92e ("clk: qcom: Add support for Display Clock Controller on SM8450")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260112-dp-aux-clks-v1-2-456b0c11b069@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The clk_dp_ops are supposed to be used for DP-related clocks with a
proper MND divier. Use shared RCG2 ops for dptx1_aux_clk_src, the same
as all other DPTX AUX clocks in this driver.
Fixes: b4d15211c4 ("clk: qcom: dispcc-glymur: Add support for Display Clock Controller")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260112-dp-aux-clks-v1-1-456b0c11b069@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for the video clock controller for video clients to be able
to request for videocc clocks on Glymur platform.
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260202-glymur_videocc-v2-4-8f7d8b4d8edd@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The global clock controller video axi reset clocks are required by
the video SW driver to assert and deassert the clock resets during
their power down sequence. Hence add these clock resets.
Fixes: efe504300a ("clk: qcom: gcc: Add support for Global Clock Controller")
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260202-glymur_videocc-v2-3-8f7d8b4d8edd@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add compatible string for Glymur video clock controller and the bindings
for Glymur Qualcomm SoC.
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260202-glymur_videocc-v2-2-8f7d8b4d8edd@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The global clock controller video axi reset clocks are required by
the video SW driver to assert and deassert the clock resets.
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260202-glymur_videocc-v2-1-8f7d8b4d8edd@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
If we found an alias through nfs3_do_create/nfs_add_or_obtain
/d_splice_alias which happens to be a dir dentry, we don't return
any error, and simply forget about this alias, but the original
dentry we were adding and passed as parameter remains negative.
This later causes an oops on nfs_atomic_open_v23/finish_open since we
supply a negative dentry to do_dentry_open.
This has been observed running lustre-racer, where dirs and files are
created/removed concurrently with the same name and O_EXCL is not
used to open files (frequent file redirection).
While d_splice_alias typically returns a directory alias or NULL, we
explicitly check d_is_dir() to ensure that we don't attempt to perform
file operations (like finish_open) on a directory inode, which triggers
the observed oops.
Fixes: 7c6c5249f0 ("NFS: add atomic_open for NFSv3 to handle O_TRUNC correctly.")
Reviewed-by: Olga Kornievskaia <okorniev@redhat.com>
Reviewed-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Roberto Bergantinos Corpas <rbergant@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Support the graphics clock controller for Glymur for Graphics SW
driver to use the clocks. GXCLKCTL (Graphics GX Clock Controller) is a
block dedicated to managing clocks for the GPU subsystem on GX power
domain. The GX clock controller driver manages only the GX GDSC and the
rest of the resources of the controller are managed by the firmware.
Update the compatible for Graphics GX Clock Controller for Glymur as the
GX clock controller is a reuse of the Kaanapali driver.
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-By: Jagadeesh Kona <jagadeesh.kona@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260127-glymur_gpucc-v1-2-547334c81ba2@oss.qualcomm.com
[bjorn: Fixed copyright and de-acronymized MODULE_DESCRIPTION]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Glymur SoC has Qualcomm GX(graphics) clock controller and also the
Graphics clock controller. The GX graphics clock controller helps in the
recovery of the Graphics subsystem.
Add bindings documentation for the Glymur Graphics Clock and Graphics
power domain Controller for Glymur SoC.
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260127-glymur_gpucc-v1-1-547334c81ba2@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
