On Glymur, a compute platform, and Kaanapali, a mobile platform, charger
FW runs on SOCCP (another subsystem). SOCCP does not have any specific
charger PDs defined. So, add support for Glymur and Kaanapali compatible
strings.
Signed-off-by: Anjelique Melendez <anjelique.melendez@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260209204915.1983997-4-anjelique.melendez@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Currently, the charger PD service path and service name are hard coded
however these paths are not guaranteed to be the same between SOCs.
Define charger PDR service path and service name as client data so that
each PMIC generation can properly define these paths.
Signed-off-by: Anjelique Melendez <anjelique.melendez@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260209204915.1983997-3-anjelique.melendez@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Glymur (a recent compute platform) and Kaanapali (a recent mobile
platform) have the charger FW running on a new subsystem SOCCP (SOC
Control Processor) instead of on ADSP like in previous platforms. Because
of this, pmic_glink interface on Glymur and Kaanapali platforms are not
compatible with previous platforms. Hence, add new compatible strings
for Glymur and Kaanapali.
Signed-off-by: Anjelique Melendez <anjelique.melendez@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260209204915.1983997-2-anjelique.melendez@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
CXL testing environment can trigger following trace
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000092: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000490-0x0000000000000497]
RIP: 0010:cxl_dpa_to_region+0x105/0x1f0 [cxl_core]
Call Trace:
<TASK>
cxl_event_trace_record+0xd1/0xa70 [cxl_core]
__cxl_event_trace_record+0x12f/0x1e0 [cxl_core]
cxl_mem_get_records_log+0x261/0x500 [cxl_core]
cxl_mem_get_event_records+0x7c/0xc0 [cxl_core]
cxl_mock_mem_probe+0xd38/0x1c60 [cxl_mock_mem]
platform_probe+0x9d/0x130
really_probe+0x1c8/0x960
__driver_probe_device+0x187/0x3e0
driver_probe_device+0x45/0x120
__device_attach_driver+0x15d/0x280
When CXL subsystem adds a cxl port to a hierarchy, there is a small
window where the new port becomes visible before it is bound to a
driver. This happens because device_add() adds a device to bus device
list before bus_probe_device() binds it to a driver.
So if two cxl memdevs are trying to add a dport to a same port via
devm_cxl_enumerate_ports(), the second cxl memdev may observe the port
and attempt to add a dport, but fails because the port has not yet been
attached to cxl port driver. That causes the memdev->endpoint can not be
updated.
The sequence is like:
CPU 0 CPU 1
devm_cxl_enumerate_ports()
# port not found, add it
add_port_attach_ep()
# hold the parent port lock
# to add the new port
devm_cxl_create_port()
device_add()
# Add dev to bus devs list
bus_add_device()
devm_cxl_enumerate_ports()
# found the port
find_cxl_port_by_uport()
# hold port lock to add a dport
device_lock(the port)
find_or_add_dport()
cxl_port_add_dport()
return -ENXIO because port->dev.driver is NULL
device_unlock(the port)
bus_probe_device()
# hold the port lock
# for attaching
device_lock(the port)
attaching the new port
device_unlock(the port)
To fix this race, require that dport addition holds the host lock
of the target port(the host of CXL root and all cxl host bridge ports is
the platform firmware device, the host of all other ports is their
parent port). The CXL subsystem already requires holding the host lock
while attaching a new port. Therefore, successfully acquiring the host
lock guarantees that port attaching has completed.
Fixes: 4f06d81e7c ("cxl: Defer dport allocation for switch ports")
Signed-off-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20260210-fix-port-enumeration-failure-v3-2-06acce0b9ead@zohomail.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
In CXL subsystem, a port has its own host device for the port creation
and removal. The host of CXL root and all the first level ports is the
platform firmware device, the host of other ports is their parent port's
device. Create this new helper to much easier to get the host of a cxl
port.
Introduce port_to_host() and use it to replace all places where using
open coded to get the host of a port.
Remove endpoint_host() as its functionality can be replaced by
port_to_host().
[dj: Squashed commit 1 and 3 in the series to commit 1. ]
Signed-off-by: Li Ming <ming.li@zohomail.com>
Tested-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20260210-fix-port-enumeration-failure-v3-1-06acce0b9ead@zohomail.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Glymur is a codename of Qualcomm SoC, not an acronym.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260217130047.281813-4-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Glymur is a codename of Qualcomm SoC, not an acronym.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260217130047.281813-3-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Commit 0c4762e268 ("KVM: arm64: nv: Avoid NV stage-2 code when NV is
not supported") added an early return to several functions in
arch/arm64/kvm/nested.c to prevent a UBSAN shift-out-of-bounds error
when accessing the pgt union for non-nested VMs.
However, this early return was inadvertently applied to
kvm_arch_flush_shadow_all() as well, causing it to skip the call to
kvm_uninit_stage2_mmu(kvm) for all non-nested VMs.
For pKVM, skipping this teardown means the host never unshares the
guest's memory with the EL2 hypervisor. When the host kernel later
recycles these leaked pages for a new VM, it attempts to re-share them.
The hypervisor correctly rejects this with -EPERM, triggering a host
WARN_ON and hanging the guest.
Fix this by dropping the early return from kvm_arch_flush_shadow_all().
The for-loop guarding the nested MMU cleanup already bounds itself when
nested_mmus_size == 0, allowing execution to proceed to
kvm_uninit_stage2_mmu() as intended.
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/all/60916cb6-f460-4751-b910-f63c58700ad0@sirena.org.uk/
Fixes: 0c4762e268 ("KVM: arm64: nv: Avoid NV stage-2 code when NV is not supported")
Signed-off-by: Fuad Tabba <tabba@google.com>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20260222083352.89503-1-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Enable pinctrl, clocks and interconnect drivers as built-in
in order for serial console to be available before kernel
reaches "init" on Qualcomm Glymur CRD.
Additionally, booting rootfs from NVMe requires TCSRCC to
be enabled as module
Enable dispcc as module which is a dependency for display enablement
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Signed-off-by: Pankaj Patil <pankaj.patil@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260219-upstream_v3_glymur_introduction-v8-2-8ce4e489ebb6@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add initial device tree support for the Glymur Compute Reference
Device(CRD) board, with this board dts glymur crd can boot to shell
with rootfs on nvme and uart21 as serial console
Features enabled are:
- Board and sleep clocks
- Volume up/down keys
- Regulators 0 - 4
- Power supplies and sideband signals (PERST, WAKE, CLKREQ) for
PCIe3b/4/5/6 controllers and PHYs
Co-developed-by: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>
Signed-off-by: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>
Co-developed-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
Co-developed-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com>
Signed-off-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com>
Co-developed-by: Jyothi Kumar Seerapu <jyothi.seerapu@oss.qualcomm.com>
Signed-off-by: Jyothi Kumar Seerapu <jyothi.seerapu@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Pankaj Patil <pankaj.patil@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260219-upstream_v3_glymur_introduction-v8-4-8ce4e489ebb6@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Introduce the base device tree support for Glymur – Qualcomm's
next-generation compute SoC. The new glymur.dtsi describes the core SoC
components, including:
- CPUs and CPU topology
- Interrupt controller and TLMM
- GCC,DISPCC and RPMHCC clock controllers
- Reserved memory and interconnects
- APPS and PCIe SMMU and firmware SCM
- Watchdog, RPMHPD, APPS RSC and SRAM
- PSCI and PMU nodes
- QUPv3 serial engines
- CPU power domains and idle states, plus SCMI/ SRAM pieces for CPU DVFS
- PDP0 mailbox, IPCC and AOSS
- Display clock controller
- SPMI PMIC arbiter with SPMI0/1/2 buses
- SMP2P nodes
- TSENS and thermal zones (8 instances, 92 sensors)
Add dtsi files for PMH0101, PMK8850, PMCX0102, SMB2370, PMH0104,
PMH0110, PMIC's along with temp-alarm and GPIO nodes needed on Glymur
Enabled PCIe controllers and associated PHY to support boot to
shell with nvme storage,
List of PCIe instances enabled:
- PCIe3b
- PCIe4
- PCIe5
- PCIe6
Co-developed-by: Raviteja Laggyshetty <raviteja.laggyshetty@oss.qualcomm.com>
Signed-off-by: Raviteja Laggyshetty <raviteja.laggyshetty@oss.qualcomm.com>
Co-developed-by: Jyothi Kumar Seerapu <jyothi.seerapu@oss.qualcomm.com>
Signed-off-by: Jyothi Kumar Seerapu <jyothi.seerapu@oss.qualcomm.com>
Co-developed-by: Maulik Shah <maulik.shah@oss.qualcomm.com>
Signed-off-by: Maulik Shah <maulik.shah@oss.qualcomm.com>
Co-developed-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com>
Signed-off-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com>
Co-developed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Co-developed-by: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>
Signed-off-by: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>
Co-developed-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
Co-developed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Co-developed-by: Manaf Meethalavalappu Pallikunhi <manaf.pallikunhi@oss.qualcomm.com>
Signed-off-by: Manaf Meethalavalappu Pallikunhi <manaf.pallikunhi@oss.qualcomm.com>
Co-developed-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
Signed-off-by: Jishnu Prakash <jishnu.prakash@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Pankaj Patil <pankaj.patil@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260219-upstream_v3_glymur_introduction-v8-3-8ce4e489ebb6@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The WCD9370 audio codec reset line on QCM6490 IDP should be active-low, but
the device tree described it as active-high. As a result, the codec is
kept in reset and fails to reset the SoundWire, leading to timeouts
and ASoC card probe failure (-ETIMEDOUT).
Fix the reset GPIO polarity to GPIO_ACTIVE_LOW so the codec can properly
initialize.
Fixes: aa04c29861 ("arm64: dts: qcom: qcm6490-idp: Add WSA8830 speakers and WCD9370 headset codec")
Signed-off-by: Ravi Hothi <ravi.hothi@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260220090220.2992193-1-ravi.hothi@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On many devices, the user can toggle the Fn lock state by
pressing Fn + Esc. Forward the associated event to the fn_lock
sysfs attribute as a poll notification.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260218005101.73680-5-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
It turns out that the FN lock status can be changed by the underlying
hardware when the user presses a special key combination. Mark the
associated register as volatile to prevent regmap from caching said
value. Also add the necessary suspend/resume handling.
Fixes: d050479693 ("platform/x86: Add Uniwill laptop driver")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260218005101.73680-4-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
On devices that have not UNIWILL_FEATURE_BATTERY set, the underlying
hardware might still send the UNIWILL_OSD_BATTERY_ALERT event. In such
a situation, the driver will access uninitialized data structures when
handling said event.
Prevent this by only handling the UNIWILL_OSD_BATTERY_ALERT event when
UNIWILL_FEATURE_BATTERY is set.
Fixes: d050479693 ("platform/x86: Add Uniwill laptop driver")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260218005101.73680-3-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
It turns out that both sysfs attributes actually directly control
the FN lock status/super key enable status, rather than the
triggering of the associated events. This behavior was first observed
on a Tuxedo notebook and was belived to be a hardware quirk.
However, it seems that i simply misunderstood the manual of the
OEM software for Intel NUC devices. The correct behavior is:
- fn_lock_toggle_enable enables/disables FN lock mode
- super_key_toggle_enable enables/disables the super key
Rename both sysfs attributes to avoid confusing users.
Fixes: d050479693 ("platform/x86: Add Uniwill laptop driver")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260218005101.73680-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
cxl_memdev_autoremove() takes device_lock(&cxlmd->dev) via guard(device)
and then calls cxl_memdev_unregister() when the attach callback was
provided but cxl_mem_probe() failed to bind.
cxl_memdev_unregister() calls
cdev_device_del()
device_del()
bus_remove_device()
device_release_driver()
This path is reached when a driver uses the @attach parameter to
devm_cxl_add_memdev() and the CXL topology fails to enumerate (e.g.
DVSEC range registers decode outside platform-defined CXL ranges,
causing the endpoint port probe to fail).
Add cxl_memdev_attach_failed() to set the scope of the check correctly.
Reported-by: kreview-c94b85d6d2
Fixes: 29317f8dc6 ("cxl/mem: Introduce cxl_memdev_attach for CXL-dependent operation")
Signed-off-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://patch.msgid.link/20260211192228.2148713-1-gourry@gourry.net
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
The pwrrdy regmap_filed is allocated in rzg2l_usbphy_ctrl_pwrrdy_init()
only if the driver data is set to RZG2L_USBPHY_CTRL_PWRRDY. Check that
pwrrdy is valid before using it to avoid "Unable to handle kernel NULL
pointer dereference at virtual address" errors.
Fixes: c5b7cd9ade ("reset: rzg2l-usbphy-ctrl: Add suspend/resume support")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This patch adds more Fn hotkeys (like Refresh rate toggle).
Additionally, remap the setup key from KEY_SETUP to KEY_CONFIG.
As KEY_CONFIG is supported by Desktop Environments for launching
system settings, whereas KEY_SETUP is often ignored by userspace.
Signed-off-by: Jesse Guo <JesseGuoTech@outlook.com>
Reviewed-by: Gladyshev Ilya <foxido@foxido.dev>
Link: https://patch.msgid.link/TYCPR01MB6851636256C39B170F2312E5D192A@TYCPR01MB6851.jpnprd01.prod.outlook.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Alienware m18 laptops support G-Mode. Therefore, match them with
G-Series quirks.
Cc: stable@vger.kernel.org
Tested-by: Olexa Bilaniuk <obilaniu@gmail.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://patch.msgid.link/20260129-m18-gmode-v1-1-48be521487b9@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reverse engineering of the HP Omen Windows utility shows that for performance
mode it uses the same codes listed in hp_thermal_profile_omen_v1. Therefore it
seems sufficient to add the board model name to omen_thermal_profile_boards.
Tested on Omen 14-fb1xxx: CPU power in performance profile reaches the Windows
limit (65W), instead of 45W in automatic BIOS mode. Max fan speed was reached
as well.
Link: https://patch.msgid.link/20260203164832.40514-1-plotnikovanton@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
This patch enables Victus thermal profile support for the HP
Victus 16-d0xxx. It does so by adding model's DMI board name 88F8 to
victus_thermal_profile_boards.
Tested on a Victus 16-d0xxx:
- Victus thermal profile choices available (quiet, balanced, performance)
instead of the default ones (cool, quiet, balanced, performance);
- Profile switching works correctly;
- About 4% increase in FPS using benchmark Cyberpunk 2077 on
performance profile;
- No noticeable regressions.
Signed-off-by: Victor Lattaro Volpini <victorlattaro@proton.me>
Link: https://patch.msgid.link/20260210000048.250280-1-victorlattaro@proton.me
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The Lenovo ThinkPad X1 Fold 16 Gen 1 has physical volume up/down
buttons that are handled through the intel-hid 5-button array
interface. The firmware does not advertise 5-button array support via
HEBC, so the driver relies on a DMI allowlist to enable it.
Add the ThinkPad X1 Fold 16 Gen 1 to the button_array_table so the
volume buttons work out of the box.
Signed-off-by: Leif Skunberg <diamondback@cohunt.app>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Link: https://patch.msgid.link/20260210085625.34380-1-diamondback@cohunt.app
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The Lenovo ThinkPad X1 Fold 16 Gen 1 has an OV5675 sensor (ACPI HID
OVTI5675) behind an INT3472 discrete PMIC controller. The INT3472
_DSM returns GPIO type 0x10 for one of the pins, which controls the
DOVDD (digital I/O power) regulator enable.
Type 0x10 is not currently handled by the driver, causing the GPIO to
be ignored with a warning. Add INT3472_GPIO_TYPE_DOVDD (0x10) and
handle it as a regulator with con_id "dovdd" to match the supply name
used by sensor drivers (e.g. ov5675).
Also increase GPIO_SUPPLY_NAME_LENGTH from 5 to 6 to accommodate
the "dovdd" name (5 chars + null terminator).
Signed-off-by: Leif Skunberg <diamondback@cohunt.app>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Link: https://patch.msgid.link/20260210132129.17943-1-diamondback@cohunt.app
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Designs based on the Qualcomm X1 Hamoa reference platform report:
driver: Idle state 1 target residency too low
This is because the declared X1 idle entry plus exit latency of 680us
exceeds the declared minimum 600us residency time:
entry-latency-us = <180>;
exit-latency-us = <500>;
min-residency-us = <600>;
Fix this to be 320us so the sum of the entry and exit latencies matches
the downstream 500us exit latency, as directed by Maulik.
Tested on a Lenovo Yoga Slim 7x with Qualcomm X1E-80-100.
Fixes: 2e65616ef0 ("arm64: dts: qcom: x1e80100: Update C4/C5 residency/exit numbers")
Signed-off-by: Daniel J Blueman <daniel@quora.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260220124626.8611-1-daniel@quora.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable the SM8750 video, camera and gpu clock controller for their
respective functionalities on the Qualcomm SM8750 MTP boards.
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260220-sm8750_defconfig_cc-v1-1-666aa922b392@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Just like in commit 154828bf95 ("staging: rtl8723bs: fix out-of-bounds
read in rtw_get_ie() parser"), we don't trust the data in the frame so
we should check the length better before acting on it
Cc: stable <stable@kernel.org>
Assisted-by: gkh_clanker_2000
Tested-by: Navaneeth K <knavaneeth786@gmail.com>
Reviewed-by: Navaneeth K <knavaneeth786@gmail.com>
Link: https://patch.msgid.link/2026022336-arrange-footwork-6e54@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hw_sm750_map() calls pci_request_region() but never releases the
region on error paths or in lynxfb_pci_remove(). This causes a
resource leak that prevents the PCI region from being mapped again
after driver removal or a failed probe. A TODO comment in the code
acknowledges this missing cleanup.
Restructure the error handling in hw_sm750_map() to properly release
the PCI region on ioremap failures, and add pci_release_region() to
lynxfb_pci_remove().
Signed-off-by: Artem Lytkin <iprintercanon@gmail.com>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20260216202038.1828-1-iprintercanon@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dma-buf invalidation is handled asynchronously by the hardware, so VFIO
must wait until all affected objects have been fully invalidated.
In addition, the dma-buf exporter is expecting that all importers unmap any
buffers they previously mapped.
Fixes: 5d74781ebc ("vfio/pci: Add dma-buf export support for MMIO regions")
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Alex Williamson <alex@shazbot.org>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20260131-dmabuf-revoke-v7-4-463d956bd527@nvidia.com
Fix spelling mistakes in comments found by codespell:
- gurantee => guarantee
- ser => set (two occurrences)
Signed-off-by: Tomasz Unger <tomasz.unger@yahoo.pl>
Link: https://patch.msgid.link/20260223114053.67890-1-tomasz.unger@yahoo.pl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove unnecessary parentheses around variables and struct members
in rtw_sta_mgt.c to comply with the Linux kernel coding style.
This issue was reported by checkpatch.pl.
Signed-off-by: Yan Pan <maxwell2119@163.com>
Link: https://patch.msgid.link/20260222072632.2931217-1-maxwell2119@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the following inconsistent indentation warnings reported by Smatch:
drivers/staging/rtl8723bs/hal/HalBtc8723b1Ant.c:2319
EXhalbtc8723b1ant_ConnectNotify(): inconsistent indenting
drivers/staging/rtl8723bs/hal/HalPhyRf_8723B.c:1410
phy_IQCalibrate_8723B(): inconsistent indenting
The affected code used a mix of tabs and spaces or excessive
indentation, making it misleading to read. Align the lines with the
surrounding code using tabs.
While at it, wrap long lines in HalPhyRf_8723B.c to silence checkpatch
warnings.
Signed-off-by: Filippo Muscherà <filippo.muschera@gmail.com>
Reviewed-by: Bera Yüzlü <b9788213@gmail.com>
Link: https://patch.msgid.link/20260208170247.7013-1-filippo.muschera@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
RECV_BLK_SZ, RECV_BLK_CNT, and RECV_BLK_TH are defined but never
referenced anywhere in the tree. Remove them.
Signed-off-by: Giorgi Tchankvetadze <giorgitchankvetadze1997@gmail.com>
Link: https://patch.msgid.link/20260218113351.405150-2-giorgitchankvetadze1997@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename camel case enumeration to snake case and expand enumeration name
for clarity. Update indentation of function prototype/definition based
on new name length. Move enumeration definition from single line to
multi-line definition.
Reported by checkpatch:
CHECK: Avoid CamelCase: <ParseRes>
CHECK: Avoid CamelCase: <ParseFailed>
CHECK: Avoid CamelCase: <ParseUnknown>
CHECK: Avoid CamelCase: <ParseOK>
Signed-off-by: Bryant Boatright <bryant.boatright@proton.me>
Reviewed-by: Ethan Tidmore <ethantidmore06@gmail.com>
Link: https://patch.msgid.link/20260217145352.2172407-2-bryant.boatright@proton.me
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename "pHT_caps_ie" to "ht_caps_ie" local variable to comply with
Linux kernel coding style.
This fixes the following checkpatch.pl warnings:
CHECK: Avoid CamelCase: <pHT_caps_ie>
Signed-off-by: Nikolay Kulikov <nikolayof23@gmail.com>
Link: https://patch.msgid.link/20260216072830.4260-1-nikolayof23@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Split multi variable declarations into single lines and move
trailing comments to the line above to fix line length and
alignment warnings.
Signed-off-by: Khushal Chitturi <khushalchitturi@gmail.com>
Link: https://patch.msgid.link/20260212142131.28131-8-khushalchitturi@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch changes the return type of traffic_status_watchdog(),
its parameter, and its local variables from u8 to bool as they
represent boolean state.
Signed-off-by: Khushal Chitturi <khushalchitturi@gmail.com>
Link: https://patch.msgid.link/20260212142131.28131-6-khushalchitturi@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert the local variable names in traffic_status_watchdog()
to snake_case to follow naming conventions.
Signed-off-by: Khushal Chitturi <khushalchitturi@gmail.com>
Link: https://patch.msgid.link/20260212142131.28131-4-khushalchitturi@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert the CamelCase field names in struct rt_link_detect_t to
snake_case to follow naming conventions.
Signed-off-by: Khushal Chitturi <khushalchitturi@gmail.com>
Link: https://patch.msgid.link/20260212142131.28131-3-khushalchitturi@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
