None of the variant drivers pass in dma_pdata, which means it's
unused and could be removed.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The restore path for SDIO_CFG_CORE_V1 was incorrectly using
SDIO_CFG_SD_PIN_SEL (offset 0x44) instead of SDIO_CFG_V1_SD_PIN_SEL
(offset 0x54), causing the wrong register to be written on resume.
The save path already uses the correct V1-specific offset. This
affects BCM7445 and BCM72116 platforms which use the V1 config core.
Fixes: b7e614802e ("mmc: sdhci-brcmstb: save and restore registers during PM")
Signed-off-by: Kamal Dasu <kamal.dasu@broadcom.com>
Cc: stable@vger.kernel.org
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
RK3576 is the first platform to introduce internal phase support, and
subsequent platforms are expected to adopt a similar design. In this
architecture, runtime suspend powers off the attached power domain, which
resets registers, including vendor-specific ones such as SDMMC_TIMING_CON0,
SDMMC_TIMING_CON1, and SDMMC_MISC_CON. These registers must be saved and
restored, a requirement that falls outside the scope of the dw_mmc core.
Fixes: 59903441f5 ("mmc: dw_mmc-rockchip: Add internal phase support")
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Tested-by: Marco Schirrmeister <mschirrmeister@gmail.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
When calling of_parse_phandle_with_args(), the caller is responsible
to call of_node_put() to release the reference of device node.
In of_get_dml_pipe_index(), it does not release the reference.
Fixes: 9cb15142d0 ("mmc: mmci: Add qcom dml support to the driver.")
Signed-off-by: Felix Gu <gu_0233@qq.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add dt schema and IDs for the power domain of MediaTek MT8189 SoC.
The MT8189 power domain IP provide power domains control function
for subsys (eg. MFG, audio, venc/vdec ...).
Signed-off-by: Irving-CH Lin <irving-ch.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add the missing power domain for the Audio IPs in this SoC.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
On the MediaTek MT8196 SoC, the Mali GPU's "shader_present" hardware
register may also include a non-functional shader core, along with the
present shader cores. An efuse elsewhere in the SoC provides the
shader_present mask with the fused off core omitted.
However, the efuse address is not publicly disclosed. What is known
though is that the GPUEB MCU reads this efuse, and exposes its contents
in the memory it shares with the application processor.
We can therefore describe the mediatek,mt8196-gpufreq device as being an
nvmem provider for this purpose, as it does provide nvmem access in an
indirect way.
The shader-present child node is left out of the list of required
properties as we may one day be able to describe the actual efuse region
this value comes from, so the gpufreq device isn't necessarily the only
device that can provide this cell, and implementations shouldn't need to
implement this functionality once this is the case.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Define an identifier for the SoC's audio power island so that it can be
referenced through device tree.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Duje Mihanović <duje@dujemihanovic.xyz>
Signed-off-by: Karel Balej <balejk@matfyz.cz>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Commit 86ef402d80 ("gpiolib: sanitize the return value of
gpio_chip::get()") started checking the return value of the .get()
callback in struct gpio_chip. Now - almost a year later - it turns out
that there are quite a few drivers in tree that can break with this
change. Partially revert it: normalize the return value in GPIO core but
also emit a warning.
Cc: stable@vger.kernel.org
Fixes: 86ef402d80 ("gpiolib: sanitize the return value of gpio_chip::get()")
Reported-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Closes: https://lore.kernel.org/all/aZSkqGTqMp_57qC7@google.com/
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://patch.msgid.link/20260219-gpiolib-set-normalize-v2-1-f84630e45796@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
PORT_ALPM_CTL is supposed to be written only before link training. Remove
writing it from ALPM disable.
Also clearing ALPM_CTL_ALPM_AUX_LESS_ENABLE and is not about disabling ALPM
but switching to AUX-Wake ALPM. Stop touching this bit on ALPM disable.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/7153
Fixes: 1ccbf13586 ("drm/i915/psr: Enable ALPM on source side for eDP Panel replay")
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: <stable@vger.kernel.org> # v6.10+
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Link: https://patch.msgid.link/20260212062731.397801-1-jouni.hogander@intel.com
(cherry picked from commit 008304c9ae)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Syzkaller reported a refcount_t: addition on 0; use-after-free warning
in perf_mmap.
The issue is caused by a race condition between a failing mmap() setup
and a concurrent mmap() on a dependent event (e.g., using output
redirection).
In perf_mmap(), the ring_buffer (rb) is allocated and assigned to
event->rb with the mmap_mutex held. The mutex is then released to
perform map_range().
If map_range() fails, perf_mmap_close() is called to clean up.
However, since the mutex was dropped, another thread attaching to
this event (via inherited events or output redirection) can acquire
the mutex, observe the valid event->rb pointer, and attempt to
increment its reference count. If the cleanup path has already
dropped the reference count to zero, this results in a
use-after-free or refcount saturation warning.
Fix this by extending the scope of mmap_mutex to cover the
map_range() call. This ensures that the ring buffer initialization
and mapping (or cleanup on failure) happens atomically effectively,
preventing other threads from accessing a half-initialized or
dying ring buffer.
Closes: https://lore.kernel.org/oe-kbuild-all/202602020208.m7KIjdzW-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Haocheng Yu <yuhaocheng035@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260202162057.7237-1-yuhaocheng035@gmail.com
IMC on SPR and EMR does not support sub-channels. In contrast, CPUs
that use gnr_uncores[] (e.g. Granite Rapids and Sierra Forest)
implement two command schedulers (SCH0/SCH1) per memory channel,
providing logically independent command and data paths.
Do not reuse the spr_uncore_imc[] configuration for these CPUs.
Instead, introduce a dedicated gnr_uncore_imc[] with per-scheduler
events, so userspace can monitor SCH0 and SCH1 independently.
On these CPUs, replace cas_count_{read,write} with
cas_count_{read,write}_sch{0,1}. This may break existing userspace
that relies on cas_count_{read,write}, prompting it to switch to the
per-scheduler events, as the legacy event reports only partial
traffic (SCH0).
Fixes: 632c4bf6d0 ("perf/x86/intel/uncore: Support Granite Rapids")
Fixes: cb4a6ccf35 ("perf/x86/intel/uncore: Support Sierra Forest and Grand Ridge")
Reported-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260210005225.20311-1-zide.chen@intel.com
Lockdep found a bug in the event scheduling when a pinned event was
failed and wakes up the threads in the ring buffer like below.
It seems it should not grab a wait-queue lock under perf-context lock.
Let's do it with irq_work.
[ 39.913691] =============================
[ 39.914157] [ BUG: Invalid wait context ]
[ 39.914623] 6.15.0-next-20250530-next-2025053 #1 Not tainted
[ 39.915271] -----------------------------
[ 39.915731] repro/837 is trying to lock:
[ 39.916191] ffff88801acfabd8 (&event->waitq){....}-{3:3}, at: __wake_up+0x26/0x60
[ 39.917182] other info that might help us debug this:
[ 39.917761] context-{5:5}
[ 39.918079] 4 locks held by repro/837:
[ 39.918530] #0: ffffffff8725cd00 (rcu_read_lock){....}-{1:3}, at: __perf_event_task_sched_in+0xd1/0xbc0
[ 39.919612] #1: ffff88806ca3c6f8 (&cpuctx_lock){....}-{2:2}, at: __perf_event_task_sched_in+0x1a7/0xbc0
[ 39.920748] #2: ffff88800d91fc18 (&ctx->lock){....}-{2:2}, at: __perf_event_task_sched_in+0x1f9/0xbc0
[ 39.921819] #3: ffffffff8725cd00 (rcu_read_lock){....}-{1:3}, at: perf_event_wakeup+0x6c/0x470
Fixes: f4b07fd62d ("perf/core: Use POLLHUP for a pinned event in error")
Closes: https://lore.kernel.org/lkml/aD2w50VDvGIH95Pf@ly-workstation
Reported-by: "Lai, Yi" <yi1.lai@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: "Lai, Yi" <yi1.lai@linux.intel.com>
Link: https://patch.msgid.link/20250603045105.1731451-1-namhyung@kernel.org
Before rseq became extensible, its original size was 32 bytes even
though the active rseq area was only 20 bytes. This had the following
impact in terms of userspace ecosystem evolution:
* The GNU libc between 2.35 and 2.39 expose a __rseq_size symbol set
to 32, even though the size of the active rseq area is really 20.
* The GNU libc 2.40 changes this __rseq_size to 20, thus making it
express the active rseq area.
* Starting from glibc 2.41, __rseq_size corresponds to the
AT_RSEQ_FEATURE_SIZE from getauxval(3).
This means that users of __rseq_size can always expect it to
correspond to the active rseq area, except for the value 32, for
which the active rseq area is 20 bytes.
Exposing a 32 bytes feature size would make life needlessly painful
for userspace. Therefore, add a reserved field at the end of the
rseq area to bump the feature size to 33 bytes. This reserved field
is expected to be replaced with whatever field will come next,
expecting that this field will be larger than 1 byte.
The effect of this change is to increase the size from 32 to 64 bytes
before we actually have fields using that memory.
Clarify the allocation size and alignment requirements in the struct
rseq uapi comment.
Change the value returned by getauxval(AT_RSEQ_ALIGN) to return the
value of the active rseq area size rounded up to next power of 2, which
guarantees that the rseq structure will always be aligned on the nearest
power of two large enough to contain it, even as it grows. Change the
alignment check in the rseq registration accordingly.
This will minimize the amount of ABI corner-cases we need to document
and require userspace to play games with. The rule stays simple when
__rseq_size != 32:
#define rseq_field_available(field) (__rseq_size >= offsetofend(struct rseq_abi, field))
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260220200642.1317826-3-mathieu.desnoyers@efficios.com
The rseq registration validates that the rseq_size argument is greater
or equal to 32 (the original rseq size), but the comment associated with
this check does not clearly state this.
Clarify the comment to that effect.
Fixes: ee3e3ac05c ("rseq: Introduce extensible rseq ABI")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260220200642.1317826-2-mathieu.desnoyers@efficios.com
Kernel test robot reported that
tools/testing/selftests/kvm/hardware_disable_test was failing due to
commit 704069649b ("sched/core: Rework sched_class::wakeup_preempt()
and rq_modified_*()")
It turns out there were two related problems that could lead to a
missed preemption:
- when hitting newidle balance from the idle thread, it would elevate
rb->next_class from &idle_sched_class to &fair_sched_class, causing
later wakeup_preempt() calls to not hit the sched_class_above()
case, and not issue resched_curr().
Notably, this modification pattern should only lower the
next_class, and never raise it. Create two new helper functions to
wrap this.
- when doing schedule_idle(), it was possible to miss (re)setting
rq->next_class to &idle_sched_class, leading to the very same
problem.
Cc: Sean Christopherson <seanjc@google.com>
Fixes: 704069649b ("sched/core: Rework sched_class::wakeup_preempt() and rq_modified_*()")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202602122157.4e861298-lkp@intel.com
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260218163329.GQ1395416@noisy.programming.kicks-ass.net
objtool warns about this function being called inside of a uaccess
section:
kernel/entry/common.o: warning: objtool: irqentry_exit+0x1dc: call to rseq_arm_slice_extension_timer() with UACCESS enabled
Interestingly, this happens with CONFIG_RSEQ_SLICE_EXTENSION disabled,
so this is an empty function, as the normal implementation is
already marked __always_inline.
I could reproduce this multiple times with gcc-11 but not with gcc-15,
so the compiler probably got better at identifying the trivial function.
Mark all the empty helpers for !RSEQ_SLICE_EXTENSION as __always_inline
for consistency, avoiding this warning.
Fixes: 0ac3b5c3dc ("rseq: Implement time slice extension enforcement timer")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260206074122.709580-1-arnd@kernel.org
Vincent reported that he was seeing undue lag clamping in a mixed
slice workload. Implement the max_slice tracking as per the todo
comment.
Fixes: 147f3efaa2 ("sched/fair: Implement an EEVDF-like scheduling policy")
Reported-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: Shubhang Kaushik <shubhang@os.amperecomputing.com>
Link: https://patch.msgid.link/20250422101628.GA33555@noisy.programming.kicks-ass.net
In the EEVDF framework with Run-to-Parity protection, `se->vprot` is an
independent variable defining the virtual protection timestamp.
When `reweight_entity()` is called (e.g., via nice/renice), it performs
the following actions to preserve Lag consistency:
1. Scales `se->vlag` based on the new weight.
2. Calls `place_entity()`, which recalculates `se->vruntime` based on
the new weight and scaled lag.
However, the current implementation fails to update `se->vprot`, leading
to mismatches between the task's actual runtime and its expected duration.
Fixes: 63304558ba ("sched/eevdf: Curb wakeup-preemption")
Suggested-by: Zhang Qiao <zhangqiao22@huawei.com>
Signed-off-by: Wang Tao <wangtao554@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: Shubhang Kaushik <shubhang@os.amperecomputing.com>
Link: https://patch.msgid.link/20260120123113.3518950-1-wangtao554@huawei.com
We should not (re)set slice protection in the sched_change pattern
which calls put_prev_task() / set_next_task().
Fixes: 63304558ba ("sched/eevdf: Curb wakeup-preemption")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: Shubhang Kaushik <shubhang@os.amperecomputing.com>
Link: https://patch.msgid.link/20260219080624.561421378%40infradead.org
It turns out that zero_vruntime tracking is broken when there is but a single
task running. Current update paths are through __{en,de}queue_entity(), and
when there is but a single task, pick_next_task() will always return that one
task, and put_prev_set_next_task() will end up in neither function.
This can cause entity_key() to grow indefinitely large and cause overflows,
leading to much pain and suffering.
Furtermore, doing update_zero_vruntime() from __{de,en}queue_entity(), which
are called from {set_next,put_prev}_entity() has problems because:
- set_next_entity() calls __dequeue_entity() before it does cfs_rq->curr = se.
This means the avg_vruntime() will see the removal but not current, missing
the entity for accounting.
- put_prev_entity() calls __enqueue_entity() before it does cfs_rq->curr =
NULL. This means the avg_vruntime() will see the addition *and* current,
leading to double accounting.
Both cases are incorrect/inconsistent.
Noting that avg_vruntime is already called on each {en,de}queue, remove the
explicit avg_vruntime() calls (which removes an extra 64bit division for each
{en,de}queue) and have avg_vruntime() update zero_vruntime itself.
Additionally, have the tick call avg_vruntime() -- discarding the result, but
for the side-effect of updating zero_vruntime.
While there, optimize avg_vruntime() by noting that the average of one value is
rather trivial to compute.
Test case:
# taskset -c -p 1 $$
# taskset -c 2 bash -c 'while :; do :; done&'
# cat /sys/kernel/debug/sched/debug | awk '/^cpu#/ {P=0} /^cpu#2,/ {P=1} {if (P) print $0}' | grep -e zero_vruntime -e "^>"
PRE:
.zero_vruntime : 31316.407903
>R bash 487 50787.345112 E 50789.145972 2.800000 50780.298364 16 120 0.000000 0.000000 0.000000 /
.zero_vruntime : 382548.253179
>R bash 487 427275.204288 E 427276.003584 2.800000 427268.157540 23 120 0.000000 0.000000 0.000000 /
POST:
.zero_vruntime : 17259.709467
>R bash 526 17259.709467 E 17262.509467 2.800000 16915.031624 9 120 0.000000 0.000000 0.000000 /
.zero_vruntime : 18702.723356
>R bash 526 18702.723356 E 18705.523356 2.800000 18358.045513 9 120 0.000000 0.000000 0.000000 /
Fixes: 79f3f9bedd ("sched/eevdf: Fix min_vruntime vs avg_vruntime")
Reported-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: Shubhang Kaushik <shubhang@os.amperecomputing.com>
Link: https://patch.msgid.link/20260219080624.438854780%40infradead.org
The mutex guard family defines _try and _intr variants but is missing
the killable one.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260217191512.1180151-4-dave@stgolabs.net
... that endif block should be CONFIG_DEBUG_LOCK_ALLOC, not
CONFIG_LOCKDEP.
Fixes: 51d7a05452 ("locking/mutex: Redo __mutex_init() to reduce generated code size")
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260217191512.1180151-3-dave@stgolabs.net
After converting the __ASSEMBLY__ statements to __ASSEMBLER__ in
commit 24a295e4ef ("x86/headers: Replace __ASSEMBLY__ with
__ASSEMBLER__ in non-UAPI headers"), some new code has been
added that uses __ASSEMBLY__ again. Convert these stragglers, too.
This is a mechanical patch, done with a simple "sed -i" command.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251218182029.166993-1-thuth@redhat.com
Rustam reported his clang builds did not boot properly; turns out his
.config has: CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B=y set.
Fix up the FineIBT code to deal with this unusual alignment.
Fixes: 931ab63664 ("x86/ibt: Implement FineIBT")
Reported-by: Rustam Kovhaev <rkovhaev@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Rustam Kovhaev <rkovhaev@gmail.com>
The commit 5b472b6e5b ("x86_64/bug: Implement __WARN_printf()")
implemented __WARN_printf(), which changed the mechanism to use UD1
instead of UD2. However, it only handles the trap in the runtime IDT
handler, while the early booting IDT handler lacks this handling. As a
result, the usage of WARN() before the runtime IDT setup can lead to
kernel crashes. Since KMSAN is enabled after the runtime IDT setup, it
is safe to use handle_bug() directly in early_fixup_exception() to
address this issue.
Fixes: 5b472b6e5b ("x86_64/bug: Implement __WARN_printf()")
Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/c4fb3645f60d3a78629d9870e8fcc8535281c24f.1768016713.git.houwenlong.hwl@antgroup.com
array_index_nospec() is no use if the result gets spilled to the stack, as
it makes the believed safe-under-speculation value subject to memory
predictions.
For all practical purposes, this means array_index_nospec() must be used in
the expression that accesses the array.
As the code currently stands, it's the wrong side of irqentry_enter(), and
'index' is put into %ebp across the function call.
Remove the index variable and reposition array_index_nospec(), so it's
calculated immediately before the array access.
Fixes: 14619d912b ("x86/fred: FRED entry/exit and dispatch code")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260106131504.679932-1-andrew.cooper3@citrix.com
The grammar is off. This fixes it.
Fixes: 6e4f3db8df ("pinctrl: just return if no valid maps")
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Inode with identical data but different @aops cannot be mixed
because the page cache is managed by different subsystems (e.g.,
@aops for compressed on-disk inodes cannot handle plain on-disk
inodes).
In this patch, we never allow inodes to share the page cache
among plain, compressed, and fileio cases. When a shared inode
is created, we initialize @aops that is the same as the initial
real inode, and subsequent inodes cannot share the page cache
if the inferred @aops differ from the corresponding shared inode.
This is reasonable as a first step because, in typical use cases,
if an inode is compressible, it will fall into compressed
inodes across different filesystem images unless users use plain
filesystems. However, in that cases, users will use plain
filesystems all the time.
Fixes: 5ef3208e3b ("erofs: introduce the page cache share feature")
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
The gpio_generic_chip_init() handles the 'ngpios' property and
assigns the respective field in struct gpio_chip either with
the value of it, or, if not found, with the default based on
the register size. There is no need to repeat this in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260219134647.2258593-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
The GPIO get callback is expected to return 0 or 1 (or a negative error
code). Ensure that the value returned by vprbrd_gpiob_get() in the output
case is normalized to the [0, 1] range.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://patch.msgid.link/20260218190657.2974723-7-dmitry.torokhov@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
The GPIO get callback is expected to return 0 or 1 (or a negative error
code). Ensure that the value returned by tps65086_gpio_get() is normalized
to the [0, 1] range.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://patch.msgid.link/20260218190657.2974723-6-dmitry.torokhov@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
The GPIO get callback is expected to return 0 or 1 (or a negative error
code). Ensure that the value returned by xway_stp_get() is normalized
to the [0, 1] range.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://patch.msgid.link/20260218190657.2974723-5-dmitry.torokhov@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
The GPIO get callback is expected to return 0 or 1 (or a negative error
code). Ensure that the value returned by lp873x_gpio_get() is normalized
to the [0, 1] range.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://patch.msgid.link/20260218190657.2974723-4-dmitry.torokhov@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
The GPIO get callback is expected to return 0 or 1 (or a negative error
code). Ensure that the value returned by da9055_gpio_get() is normalized
to the [0, 1] range.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://patch.msgid.link/20260218190657.2974723-3-dmitry.torokhov@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
The GPIO get callback is expected to return 0 or 1 (or a negative error
code). Ensure that the value returned by cgbc_gpio_get() is normalized
to the [0, 1] range.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://patch.msgid.link/20260218190657.2974723-2-dmitry.torokhov@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
The GPIO get callback is expected to return 0 or 1 (or a negative error
code). Ensure that the value returned by bd9571mwv_gpio_get() is
normalized to the [0, 1] range.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://patch.msgid.link/20260218190657.2974723-1-dmitry.torokhov@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
On Tegra platforms, multiple SoC instances may be present with each
defining the same GPIO name. For such devices, this results in
duplicate GPIO names.
When the device has a valid NUMA node, prepend the NUMA node ID
to the GPIO name prefix. The node ID identifies each socket,
ensuring GPIO line names remain distinct across multiple sockets.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260217081431.1208351-2-pshete@nvidia.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Introduce TEGRA_GPIO_PREFIX() to define the Tegra SoC GPIO name
prefix in one place. Use it for the Tegra410 COMPUTE and SYSTEM
controllers so the prefix is "COMPUTE-" and "SYSTEM-" respectively.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260217081431.1208351-1-pshete@nvidia.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
linehandle_create() was recently converted to use FD_PREPARE() to
simplify fd creation and cleanup logic.
Apply the equivalent conversion to lineevent_create() and
linereq_create().
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Link: https://patch.msgid.link/20260216123709.281444-1-warthog618@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
The classic parent_wake_irq can only occur after the system has
been placed into a hardware managed power management state. This
prevents its use for waking from software managed suspend states
like s2idle.
By allowing the parent_irq to be enabled for wake enabled GPIO
during suspend, these GPIO can now be used to wake from these
states. The 'suspended' boolean is introduced to support wake
event accounting.
Signed-off-by: Doug Berger <opendmb@gmail.com>
[florian: port changes after generic gpio chip conversion]
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260204164333.1146039-4-florian.fainelli@broadcom.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
The .irq_mask_ack() operation is slightly more efficient than doing
.irq_mask() and .irq_ack() separately.
More importantly for this driver it bypasses the check of
irqd_irq_masked ensuring a previously masked but still active
interrupt gets remasked if unmasked at the hardware level. This
allows the driver to more efficiently unmask the wake capable
interrupts when quiescing without needing to enable the irqs
individually to clear the irqd_irq_masked state.
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Doug Berger <opendmb@gmail.com>
Co-developed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260204164333.1146039-3-florian.fainelli@broadcom.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Consistently use irqd_to_hwirq(d) which is the recommended helper to
fetch the hardware IRQ number from an irq_data structure. While at it,
update the brcmstb_gpio_set_imask() function signature to use the proper
type for the "hwirq" argument rather than "unsigned int".
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260204164333.1146039-2-florian.fainelli@broadcom.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Wakeup capable GPIOs uses PDC as parent IRQ chip and PDC on qcs615 do not
support dual edge IRQs. Add missing wakeirq_dual_edge_errata configuration
to enable workaround for dual edge GPIO IRQs.
Fixes: b698f36a9d ("pinctrl: qcom: add the tlmm driver for QCS615 platform")
Signed-off-by: Maulik Shah <maulik.shah@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Add pinctrl support for the RV1103B.
Based on the 5.10 Rockchip vendor kernel driver.
Signed-off-by: Fabio Estevam <festevam@nabladev.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
