Document the compatible string for the RV1103B SoC.
Signed-off-by: Fabio Estevam <festevam@nabladev.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
of_drm_find_bridge() is deprecated. Move to its replacement
of_drm_find_and_get_bridge() which gets a bridge reference, and ensure it
is put when done.
We need to handle the two cases: when a panel is found and when it isn't,
even though the latter is not supported. So:
* in case a panel is not found and bridge is, get a reference to the
found bridge
* in case a panel is found, get a reference to the panel_bridge when it
is added, so the following code always get exactly one reference that
it needs to put
Finally, use the next_bridge pointer in struct drm_bridge in order to
simplify putting the reference.
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260131-drm-bridge-alloc-getput-drm_of_find_bridge-4-v2-4-e081bcdc1467@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
mcde_dsi_bind() has a loop over all subnodes looking for a panel, but does
not exit when a match is found and only stores the last match. However this
will be problematic when introducing refcounting on the struct drm_device
pointer in a following commit, because of_drm_find_and_get_bridge() would
get a reference to multiple bridges.
There seem to be no real reason for looking for multiple panels, so just
break as soon as a match is found.
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260131-drm-bridge-alloc-getput-drm_of_find_bridge-4-v2-3-e081bcdc1467@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Add QUIRK_FLAG_SKIP_CLOCK_SELECTOR for Focusrite devices.
During interface parsing, snd_usb_clock_find_source() reads the clock
selector value then writes it back unchanged. On Focusrite devices
this redundant write results in a ~300ms delay per altsetting, adding
~1.8s to probe time on a typical device with 6 altsettings.
Enabling SKIP_CLOCK_SELECTOR skips the redundant write-back.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/00e53ae0a508b41516b41833daa17823381a649c.1771594828.git.g@b4.vu
Add a quirk flag to skip the usb_set_interface(),
snd_usb_init_pitch(), and snd_usb_init_sample_rate() calls in
__snd_usb_parse_audio_interface(). These are redundant with
snd_usb_endpoint_prepare() at stream-open time.
Enable the quirk for Focusrite devices, as init_sample_rate(rate_max)
sets 192kHz during probing, which disables the internal mixer and Air
and Safe modes.
Fixes: 16f1f83844 ("Revert "ALSA: usb-audio: Drop superfluous interface setup at parsing"")
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/65a7909b15f9feb76c2a6f4f8814c240ddc50737.1771594828.git.g@b4.vu
Remove QUIRK_FLAG_VALIDATE_RATES for Focusrite. With the previous
commit, focusrite_valid_sample_rate() produces correct rate tables
without USB probing.
QUIRK_FLAG_VALIDATE_RATES sends SET_CUR requests for each rate (~25ms
each) and leaves the device at 192kHz. This is a problem because that
rate: 1) disables the internal mixer, so outputs are silent until an
application opens the PCM and sets a lower rate, and 2) the Air and
Safe modes get disabled.
Fixes: 5963e52621 ("ALSA: usb-audio: Enable rate validation for Scarlett devices")
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/09b9c012024c998c4ca14bd876ef0dce0d0b6101.1771594828.git.g@b4.vu
Replace the bLength == 10 max_rate check in
focusrite_valid_sample_rate() with filtering that also examines the
bmControls VAL_ALT_SETTINGS bit.
When VAL_ALT_SETTINGS is readable, the device uses strict
per-altsetting rate filtering (only the highest rate pair for that
altsetting is valid). When it is not readable, all rates up to
max_rate are valid.
For devices without the bLength == 10 Format Type descriptor extension
but with VAL_ALT_SETTINGS readable and multiple altsettings (only seen
in Scarlett 18i8 3rd Gen playback), fall back to the Focusrite
convention: alt 1 = 48kHz, alt 2 = 96kHz, alt 3 = 192kHz.
This produces correct rate tables for all tested Focusrite devices
(all Scarlett 2nd, 3rd, and 4th Gen, Clarett+, and Vocaster) using
only USB descriptors, allowing QUIRK_FLAG_VALIDATE_RATES to be removed
for Focusrite in the next commit.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/7e18c1f393a6ecb6fc75dd867a2c4dbe135e3e22.1771594828.git.g@b4.vu
Similar to other Samsung laptops, NT950QCT also requires the
ALC298_FIXUP_SAMSUNG_AMP quirk applied.
Cc: <stable@vger.kernel.org>
Signed-off-by: Juhyung Park <qkrwngud825@gmail.com>
Link: https://patch.msgid.link/20260222122609.281191-2-qkrwngud825@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Acer Aspire V3-572G has a combo jack (ALC283) but the BIOS
sets pin 0x19 to 0x411111f0 (not connected), so the headset mic
is not detected.
Add a quirk to override pin 0x19 as a headset mic and enable
headset mode.
Cc: stable@vger.kernel.org
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221075
Suggested-by: Charalampos Mitrodimas <charmitro@posteo.net>
Signed-off-by: Panagiotis Foliadis <pfoliadis@posteo.net>
Reviewed-by: Charalampos Mitrodimas <charmitro@posteo.net>
Link: https://patch.msgid.link/20260221-fix-detect-mic-v1-1-b6e427b5275d@posteo.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
scarlett2_add_dsp_ctls() was incorrectly storing the precomp and PEQ
filter coefficient control pointers into the precomp_flt_switch_ctls
and peq_flt_switch_ctls arrays instead of the intended targets
precomp_flt_ctls and peq_flt_ctls. Pass NULL instead, as the filter
coefficient control pointers are not used, and remove the unused
precomp_flt_ctls and peq_flt_ctls arrays from struct scarlett2_data.
Additionally, scarlett2_update_filter_values() was reading
dsp_input_count * peq_flt_count values for
SCARLETT2_CONFIG_PEQ_FLT_SWITCH, but the peq_flt_switch array is
indexed only by dsp_input_count (one switch per DSP input, not per
filter). Fix the read count.
Fixes: b64678eb4e ("ALSA: scarlett2: Add DSP controls")
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Link: https://patch.msgid.link/86497b71db060677d97c38a6ce5f89bb3b25361b.1771581197.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On Star Labs StarFighter (Realtek ALC233/235), the internal speakers can
emit an audible pop when entering or leaving runtime suspend.
Mute the speaker output paths via snd_hda_gen_shutup_speakers() in the
Realtek shutup callback before the codec is powered down.
This is enough to avoid the pop without special EAPD handling.
Test results:
- runtime PM pop fixed
- still reaches D3 (PCI 0000:00:1f.3 power_state=D3hot)
- does not address pops on cold boot (G3 exit) or around display manager
start/shutdown
journalctl -k (boot):
- snd_hda_codec_alc269 hdaudioC0D0: ALC233: picked fixup for PCI SSID
7017:2014
- snd_hda_codec_alc269 hdaudioC0D0: autoconfig for ALC233: line_outs=1
(0x1b/0x0/0x0/0x0/0x0) type:speaker
Suggested-by: Takashi Iwai <tiwai@suse.com>
Tested-by: Sean Rhodes <sean@starlabs.systems>
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Link: https://patch.msgid.link/4d5fb71b132bb283fd41c622b8413770b2065242.1771532060.git.sean@starlabs.systems
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently, mac80211 only initializes default WMM parameters
on the deflink during do_open(). For MLO cases, this
leaves the additional links without proper WMM defaults
if hostapd does not supply per-link WMM parameters, leading
to inconsistent QoS behavior across links.
Set default WMM parameters for each link during
ieee80211_vif_update_links(), because this ensures all
individual links in an MLD have valid WMM settings during
bring-up and behave consistently across different BSS.
Signed-off-by: Ramanathan Choodamani <quic_rchoodam@quicinc.com>
Signed-off-by: Aishwarya R <aishwarya.r@oss.qualcomm.com>
Link: https://patch.msgid.link/20260205094216.3093542-1-aishwarya.r@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The lbs_free_adapter() function uses timer_delete() (non-synchronous)
for both command_timer and tx_lockup_timer before the structure is
freed. This is incorrect because timer_delete() does not wait for
any running timer callback to complete.
If a timer callback is executing when lbs_free_adapter() is called,
the callback will access freed memory since lbs_cfg_free() frees the
containing structure immediately after lbs_free_adapter() returns.
Both timer callbacks (lbs_cmd_timeout_handler and lbs_tx_lockup_handler)
access priv->driver_lock, priv->cur_cmd, priv->dev, and other fields,
which would all be use-after-free violations.
Use timer_delete_sync() instead to ensure any running timer callback
has completed before returning.
This bug was introduced in commit 8f641d93c3 ("libertas: detect TX
lockups and reset hardware") where del_timer() was used instead of
del_timer_sync() in the cleanup path. The command_timer has had the
same issue since the driver was first written.
Fixes: 8f641d93c3 ("libertas: detect TX lockups and reset hardware")
Fixes: 954ee164f4 ("[PATCH] libertas: reorganize and simplify init sequence")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Hodges <git@danielhodges.dev>
Link: https://patch.msgid.link/20260206195356.15647-1-git@danielhodges.dev
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
dev_alloc_name() returns the allocated ID on success, which could be
over 0.
Fix the return value check to check for negative error codes.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/aYmsQfujoAe5qO02@stanley.mountain/
Fixes: 7bab5bdb81 ("wifi: mwifiex: Allocate dev name earlier for interface workqueue name")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20260210100337.1131279-1-wenst@chromium.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The adis_init() function dereferences adis->ops to check if the
individual function pointers (write, read, reset) are NULL, but does
not first check if adis->ops itself is NULL.
Drivers like adis16480, adis16490, adis16545 and others do not set
custom ops and rely on adis_init() assigning the defaults. Since struct
adis is zero-initialized by devm_iio_device_alloc(), adis->ops is NULL
when adis_init() is called, causing a NULL pointer dereference:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
pc : adis_init+0xc0/0x118
Call trace:
adis_init+0xc0/0x118
adis16480_probe+0xe0/0x670
Fix this by checking if adis->ops is NULL before dereferencing it,
falling through to assign the default ops in that case.
Fixes: 3b29bcee8f ("iio: imu: adis: Add custom ops struct")
Signed-off-by: Radu Sabau <radu.sabau@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When the driver probe fails we encounter a regulator put warning
because vddio regulator is not stopped before release. The issue
comes from pm_runtime not already setup when core probe fails and
the vddio regulator disable callback is called.
Fix the issue by setting pm_runtime active early before vddio
regulator resource cleanup. This requires to cut pm_runtime
set_active and enable in 2 function calls.
Fixes: 7ff021a3fa ("iio: imu: inv_icm45600: add new inv_icm45600 driver")
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
In the edge case where the IIO device is unregistered while we're
buffering, we were directly returning an error without removing the wait
queue. Instead, set 'ret' and break out of the loop.
Fixes: 9eeee3b0bf ("iio: Add output buffer support")
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The return value of pm_runtime_get_sync() is not checked, allowing
the driver to access hardware that may fail to resume. The device
usage count is also unconditionally incremented. Use
pm_runtime_resume_and_get() which propagates errors and avoids
incrementing the usage count on failure.
In preenable, add pm_runtime_put_autosuspend() on set_8khz_samplerate()
failure since postdisable does not run when preenable fails.
Fixes: 3904b28efb ("iio: gyro: Add driver for the MPU-3050 gyroscope")
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The return value of pm_runtime_get_sync() is not checked, and the
function always returns success. This allows I2C mux operations to
proceed even when the device fails to resume.
Use pm_runtime_resume_and_get() and propagate its return value to
properly handle resume failures.
Fixes: 3904b28efb ("iio: gyro: Add driver for the MPU-3050 gyroscope")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The function iio_get_current_scan_type() can return an error pointer,
the return value scan_type is not checked for this and immediately
dereferenced which can cause a kernel panic.
Add check for IS_ERR() and propagate the error back.
Fixes: ff085189cb ("iio: adc: ad7768-1: add support for ADAQ776x-1 ADC Family")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202602051234.5gArzLyZ-lkp@intel.com/
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
sizeof(num) evaluates to sizeof(size_t) which is 8 bytes on 64-bit,
but the buffer elements are only 4 bytes. The same function already
uses sizeof(*meas) on line 312, making the mismatch evident. Use
sizeof(*meas) consistently.
Fixes: b2e171f5a5 ("iio: sps30: add support for serial interface")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Acked-by: Tomasz Duszynski <tduszyns@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
sizeof(num) evaluates to sizeof(size_t) (8 bytes on 64-bit) instead
of the intended __be32 element size (4 bytes). Use sizeof(*meas) to
correctly match the buffer element type.
Fixes: 8f3f130852 ("iio: sps30: separate core and interface specific code")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Acked-by: Tomasz Duszynski <tduszyns@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
TLV493D_BX2_MAG_X_AXIS_LSB is defined as GENMASK(7, 4). FIELD_GET()
already right-shifts bits [7:4] to [3:0], so the additional >> 4
discards most of the X-axis low nibble. The Y and Z axes correctly
omit this extra shift. Remove it.
Fixes: 106511d280 ("iio: magnetometer: add support for Infineon TLV493D 3D Magentic sensor")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Avoid division by zero when sampling frequency is unspecified.
Fixes: 60df548277 ("iio: proximity: Add driver support for TYHX's HX9023S capacitive proximity sensor")
Signed-off-by: Yasin Lee <yasin.lee.x@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Initialize fw_size before copying firmware data into the flexible
array member to match the __counted_by() annotation. This fixes the
incorrect assignment order that triggers runtime safety checks.
Fixes: e9ed97be4f ("iio: proximity: hx9023s: Added firmware file parsing functionality")
Signed-off-by: Yasin Lee <yasin.lee.x@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This function refers to the Bosch BME680 API as the source of the
calculation, but one of the constants does not match the Bosch
implementation. This appears to be a simple transposition of two digits,
resulting in a wait time that is too short. This can cause the following
'device measurement cycle incomplete' check to occasionally fail, returning
EBUSY to user space.
Adjust the constant to match the Bosch implementation and resolve the EBUSY
errors.
Fixes: 4241665e6e ("iio: chemical: bme680: Fix sensor data read operation")
Link: https://github.com/boschsensortec/BME68x_SensorAPI/blob/v4.4.8/bme68x.c#L521
Signed-off-by: Chris Spencer <spencercw@gmail.com>
Acked-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The DS442x DAC uses sign-magnitude encoding, so -128 cannot be represented
in hardware (7-bit magnitude).
Previously, passing -128 resulted in a truncated value that programmed
0mA (magnitude 0) instead of the expected maximum negative current,
effectively failing silently.
Reject -128 to avoid producing the wrong current.
Fixes: d632a2bd8f ("iio: dac: ds4422/ds4424 dac driver")
Cc: stable@vger.kernel.org
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Drive bit must be set for open-drain mode and be cleared for push-pull
mode.
Referring to datasheet DS-000576_ICM-45605.pdf section 17.23
INT1_CONFIG2.
Fixes: 06674a72cf ("iio: imu: inv_icm45600: add buffer support in iio devices")
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The MCP4131 wiper address is shifted twice when preparing the SPI
command in mcp4131_write_raw().
The address is already shifted when assigned to the local variable
"address", but is then shifted again when written to data->buf[0].
This results in an incorrect command being sent to the device and
breaks wiper writes to the second channel.
Remove the second shift and use the pre-shifted address directly
when composing the SPI transfer.
Fixes: 22d199a539 ("iio: potentiometer: add driver for Microchip MCP413X/414X/415X/416X/423X/424X/425X/426X")
Signed-off-by: Lukas Schmid <lukas.schmid@netcube.li>#
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
IRQ needs to be acked. for some odd reasons, reading from irq status does
not reliable help, enable acking from any register to be on the safe side
and read the irq status register. Comments in the code indicate a known
unreliability with that register.
The blamed commit was tested with mpu6050 in lg,p895 and lg,p880 according
to Tested-bys. But with the MPU9150 in the Epson Moverio BT-200 this leads
to irq storms without properly acking the irq.
Fixes: 0a3b517c80 ("iio: imu: inv_mpu6050: fix interrupt status read for old buggy chips")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The regmap_read_poll_timeout() uses ADF4377_0000_SOFT_RESET_R_MSK
twice instead of checking both SOFT_RESET_MSK (bit 0) and
SOFT_RESET_R_MSK (bit 7). This causes an incomplete reset status check.
The code first sets both SOFT_RESET and SOFT_RESET_R bits to 1 via
regmap_update_bits(), then polls for them to be cleared. Since we set
both bits before polling, we should be waiting for both to clear.
Fix by using both masks as done in regmap_update_bits() above.
Fixes: eda549e2e5 ("iio: frequency: adf4377: add support for ADF4377")
Signed-off-by: SeungJu Cheon <suunj1331@gmail.com>
Cc: Stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Move pm_runtime_put_autosuspend() before the error check to ensure
the PM runtime reference count is always decremented after
pm_runtime_get_sync(), regardless of whether the read operation
succeeds or fails.
Fixes: 1f0477f183 ("iio: light: new driver for the ROHM BH1780")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
ODR switch is done in 2 steps when FIFO is on : change the ODR register
value and acknowledge change when reading the FIFO ODR change flag.
When we are switching odr and turning buffer off just afterward, we are
losing the FIFO ODR change flag and ODR switch is blocked.
Fix the issue by force applying any waiting ODR change when turning
buffer off.
Fixes: ec74ae9fd3 ("iio: imu: inv_icm42600: add accurate timestamping")
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
ODR switch is done in 2 steps when FIFO is on : change the ODR register
value and acknowledge change when reading the FIFO ODR change flag.
When we are switching to the same odr value, we end up waiting for a
FIFO ODR flag that is never happening.
Fix the issue by doing nothing and exiting properly when we are
switching to the same ODR value.
Fixes: ec74ae9fd3 ("iio: imu: inv_icm42600: add accurate timestamping")
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When probe of the sdio brcmfmac device fails for some reasons (i.e.
missing firmware), the sdiodev->bus is set to error instead of NULL, thus
the cleanup later in brcmf_sdio_remove() tries to free resources via
invalid bus pointer. This happens because sdiodev->bus is set 2 times:
first in brcmf_sdio_probe() and second time in brcmf_sdiod_probe(). Fix
this by chaning the brcmf_sdio_probe() function to return the error code
and set sdio->bus only there.
Fixes: 0ff0843310 ("wifi: brcmfmac: Add optional lpo clock enable support")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Arend van Spriel<arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260203102133.1478331-1-m.szyprowski@samsung.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Use guard() and scoped_guard() to handle the mutex lock instead of
manually locking and unlocking it.
Signed-off-by: Gabriel Almeida <gabrielsousa230@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reorder the header includes to follow the usual kernel ordering
conventions and improve readability.
Signed-off-by: Gabriel Almeida <gabrielsousa230@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fix a typo in the description where "Is is" should be "It is".
Signed-off-by: Pranav Kharche <pranavkharche7@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add support for the AD4082, AD4085 and AD4088 SAR ADCs. These devices
share the same resolution as their base variants but differ in LVDS CNV
clock count maximum:
- AD4082 (20-bit, like AD4080): lvds_cnv_clk_cnt_max 8 vs 7
- AD4085 (16-bit, like AD4084): lvds_cnv_clk_cnt_max 8 vs 2
- AD4088 (14-bit, like AD4087): lvds_cnv_clk_cnt_max 8 vs 1
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add device tree binding support for AD4082, AD4085 and AD4088 SAR ADCs.
Add adi,ad4082, adi,ad4085 and adi,ad4088 to the compatible enum.
A fallback compatible string is not appropriate for these devices as they
differ in LVDS CNV clock count maximum from their base variants:
- AD4082 (20-bit) vs AD4080: lvds_cnv_clk_cnt_max 8 vs 7
- AD4085 (16-bit) vs AD4084: lvds_cnv_clk_cnt_max 8 vs 2
- AD4088 (14-bit) vs AD4087: lvds_cnv_clk_cnt_max 8 vs 1
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use BIT macro to make the list of average modes more readable.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
AD4030 and similar devices all connect to the system as SPI peripherals.
Reference spi-peripheral-props so common SPI peripheral can be used from
ad4030 dt-binding.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Simplify probe by using devm_regulator_get_enable_read_voltage() to
get, enable and read the regulator voltage in a single call, caching
the value at probe time.
The reference voltage for this DAC is a fixed hardware configuration
that is not expected to change at runtime, so reading it once during
probe and caching the millivolt value is sufficient.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Simplify probe by using devm_regulator_get_enable_read_voltage() to
get, enable and read the regulator voltage in a single call, caching
the value at probe time.
This is a functional change as VDD voltage is now read once at probe
rather than dynamically on each temperature measurement. However, in
real deployments it is very rare for VDD to change after initial probe.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This reverts commit b7f99fa1b6.
The added code is currently a dead code. Moreover, the driver is not
designed to have any defaults effectively making driver data a mandatory
information to work with. Taking all together, revert unneeded change.
Discussion at #1 concluded in agreeing a new policy on this for IIO.
Link: https://lore.kernel.org/linux-iio/20260217080514.1288115-1-andriy.shevchenko@linux.intel.com/#1
Reported-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Refactor each sca3000 variant with it's own chip_info struct, update the
sca3000_probe() to use spi_get_device_match_data().
Suggested-by: David Lechner <dlechner@baylibre.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
