Let's not piggy-back on the existing lock and use a separate lock for the
huge page list. Now that we use a separate lock, there is no need to
disable interrupts, so use the non-irqsave variants. We only required the
irqsave variants because of the balloon device lock.
This is a preparation for changing the locking used to protect
balloon_dev_info.
While at it, talk about "page migration" instead of "page compaction".
We'll change that in core code soon as well.
Link: https://lkml.kernel.org/r/20260119230133.3551867-8-david@kernel.org
Signed-off-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Eugenio Pérez <eperezma@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: SeongJae Park <sj@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Let's centralize it, by allowing for the driver to enable this handling
through a new flag (bool for now) in the balloon device info.
Note that we now adjust the counter when adding/removing a page into the
balloon list: when removing a page to deflate it, it will now happen
before the driver communicated with hypervisor, not afterwards.
This shouldn't make a difference in practice.
Link: https://lkml.kernel.org/r/20260119230133.3551867-7-david@kernel.org
Signed-off-by: David Hildenbrand (Red Hat) <david@kernel.org>
Acked-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Eugenio Pérez <eperezma@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: SeongJae Park <sj@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Let's update the balloon page references, the balloon page list, the
BALLOON_MIGRATE counter and the isolated-pages counter in
balloon_page_migrate(), after letting the balloon->migratepage() callback
deal with the actual inflation+deflation.
Note that we now perform the balloon list modifications outside of any
implementation-specific locks: which is fine, there is nothing special
about these page actions that the lock would be protecting.
The old page is already no longer in the list (isolated) and the new page
is not yet in the list.
Let's use -ENOENT to communicate the special "inflation of new page failed
after already deflating the old page" to balloon_page_migrate() so it can
handle it accordingly.
While at it, rename balloon->b_dev_info to make it match the other
functions. Also, drop the comment above balloon_page_migrate(), which
seems unnecessary.
Link: https://lkml.kernel.org/r/20260119230133.3551867-6-david@kernel.org
Signed-off-by: David Hildenbrand (Red Hat) <david@kernel.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Eugenio Pérez <eperezma@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: SeongJae Park <sj@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Let's clarify a bit by extending the comments.
Link: https://lkml.kernel.org/r/20260119230133.3551867-5-david@kernel.org
Signed-off-by: David Hildenbrand (Red Hat) <david@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Eugenio Pérez <eperezma@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: SeongJae Park <sj@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Now that there is not a lot of logic left, let's just inline setting up
the migration function.
To avoid #ifdef in the caller we can instead use IS_ENABLED() and make the
compiler happy by only providing the function declaration.
Now that the function is gone, drop the "out_balloon_compaction" label.
Note that before commit 68f2736a85 ("mm: Convert all PageMovable users
to movable_operations") we actually had to undo something, now not
anymore.
Link: https://lkml.kernel.org/r/20260119230133.3551867-4-david@kernel.org
Signed-off-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Eugenio Pérez <eperezma@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: SeongJae Park <sj@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Now that there is not a lot of logic left, let's just inline setting up
the migration function and drop all these excessive comments that are not
really required (or true) anymore.
To avoid #ifdef in the caller we can instead use IS_ENABLED() and make the
compiler happy by only providing the function declaration.
Link: https://lkml.kernel.org/r/20260119230133.3551867-3-david@kernel.org
Signed-off-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Eugenio Pérez <eperezma@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: SeongJae Park <sj@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: balloon infrastructure cleanups", v3.
I started with wanting to remove the dependency of the balloon
infrastructure on the page lock, but ended up performing various other
cleanups, some of which I had on my todo list for years.
This series heavily cleans up and simplifies our balloon infrastructure,
including our balloon page migration functionality.
With this series, we no longer make use of the page lock for PageOffline
pages as part of the balloon infrastructure (preparing for memdescs where
PageOffline pages won't have any such lock), and simplifies migration
handling such that refcounting can more easily be adjusted later
(long-term focus is for PageOffline pages to not have a refcount either).
Plenty of related cleanups.
This patch (of 24):
When we're effectively deflating the balloon while migrating a page
because inflating the new page failed, we're not adjusting
BALLOON_DEFLATE.
Let's do that. This is a preparation for factoring out this handling to
the core code, making it work in a similar way first.
As this (deflating while migrating because of inflation error) is a corner
case that I don't really expect to happen in practice and the stats are
not that crucial, this likely doesn't classify as a fix.
Link: https://lkml.kernel.org/r/20260119230133.3551867-1-david@kernel.org
Link: https://lkml.kernel.org/r/20260119230133.3551867-2-david@kernel.org
Signed-off-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Eugenio Pérez <eperezma@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jerrin Shaji George <jerrin.shaji-george@broadcom.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The global variable 'khugepaged_collapse_control' is not used outside of
mm/khugepaged.c. Make it static to limit its scope.
Link: https://lkml.kernel.org/r/20260118192253.9263-14-shivankg@amd.com
Signed-off-by: Shivank Garg <shivankg@amd.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Nico Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Convert result variables and return types from int to enum scan_result
throughout khugepaged code. This improves type safety and code clarity by
making the intent explicit.
No functional change.
Link: https://lkml.kernel.org/r/20260118192253.9263-12-shivankg@amd.com
Signed-off-by: Shivank Garg <shivankg@amd.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Tested-by: Nico Pache <npache@redhat.com>
Reviewed-by: Nico Pache <npache@redhat.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The only external caller of collapse_pte_mapped_thp() is uprobe, which
ignores the return value. Change the external API to return void to
simplify the interface.
Introduce try_collapse_pte_mapped_thp() for internal use that preserves
the return value. This prepares for future patch that will convert the
return type to use enum scan_result.
Link: https://lkml.kernel.org/r/20260118192253.9263-10-shivankg@amd.com
Signed-off-by: Shivank Garg <shivankg@amd.com>
Suggested-by: David Hildenbrand (Red Hat) <david@kernel.org>
Acked-by: Lance Yang <lance.yang@linux.dev>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Tested-by: Nico Pache <npache@redhat.com>
Reviewed-by: Nico Pache <npache@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/khugepaged: cleanups and scan limit fix", v3.
This series contains several cleanups for mm/khugepaged.c to improve code
readability and type safety, and one functional fix to ensure
khugepaged_scan_mm_slot() correctly accounts for small VMAs towards scan
limit.
This patch (of 4):
Replace goto skip with actual logic for better code readability.
No functional change.
Link: https://lkml.kernel.org/r/20260118192253.9263-4-shivankg@amd.com
Link: https://lkml.kernel.org/r/20260118192253.9263-6-shivankg@amd.com
Signed-off-by: Shivank Garg <shivankg@amd.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Acked-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reviewed-by: Lance Yang <lance.yang@linux.dev>
Tested-by: Nico Pache <npache@redhat.com>
Reviewed-by: Nico Pache <npache@redhat.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Remove test_generic_01.sh since block layer may reorder I/O, making
the test prone to false positives. Apply the improvements to
test_generic_02.sh instead, which supposes for covering ublk dispatch
io order.
Rework test_generic_02 to verify that ublk dispatch doesn't reorder I/O
by comparing request start order with completion order using bpftrace.
The bpftrace script now:
- Tracks each request's start sequence number in a map keyed by sector
- On completion, verifies the request's start order matches expected
completion order
- Reports any out-of-order completions detected
The test script:
- Wait bpftrace BEGIN code block is run
- Pins fio to CPU 0 for deterministic behavior
- Uses block_io_start and block_rq_complete tracepoints
- Checks bpftrace output for reordering errors
Reported-and-tested-by: Alexander Atanasov <alex@zazolabs.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When running tests in parallel with high JOBS count (e.g., JOBS=64),
the existing timeouts can be insufficient due to system load:
- Increase state wait loops from 20/50 to 100 iterations in
_recover_ublk_dev(), __ublk_quiesce_dev(), and __ublk_kill_daemon()
to handle slower state transitions under heavy load
- Add --timeout=20 to udevadm settle calls to prevent indefinite
hangs when udev event queue is overwhelmed by rapid device
creation/deletion
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add _ublk_sleep() helper function that uses different sleep times
depending on whether tests run in parallel or sequential mode.
Usage: _ublk_sleep <normal_secs> <parallel_secs>
Export JOBS variable from Makefile so test scripts can detect parallel
execution, and use _ublk_sleep in test_part_02.sh to handle the
partition scan delay (1s normal, 5s parallel).
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add convenient Makefile targets for running specific test groups:
- run_generic, run_batch, run_null, run_loop, run_stripe, run_stress, etc.
- run_all for running all tests
Test groups are auto-detected from TEST_PROGS using pattern matching
(test_<group>_<num>.sh -> group), and targets are generated dynamically
using define/eval templates.
Supports parallel execution via JOBS variable:
- JOBS=1 (default): sequential with kselftest TAP output
- JOBS>1: parallel execution with xargs -P
Usage examples:
make run_null # Sequential execution
make run_stress JOBS=4 # Parallel with 4 jobs
make run_all JOBS=8 # Run all tests with 8 parallel jobs
With JOBS=8, running time of `make run_all` is reduced to 2m2s from 6m5s
in my test VM.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Track device IDs in UBLK_DEVS array when created. Update
_cleanup_test() to only delete devices created by this test
instead of using 'del -a' which removes all devices.
This prepares for running tests concurrently where each test
should only clean up its own devices.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add _ublk_del_dev() to delete a specific ublk device by ID and
use it in all test scripts instead of calling UBLK_PROG directly.
Also remove unused _remove_ublk_devices() function.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Encapsulate each test case in its own function for better organization
and maintainability:
- _setup_device(): device and backfile initialization
- _test_fill_and_verify(): initial data population
- _test_corrupted_reftag(): reftag corruption detection test
- _test_corrupted_data(): data corruption detection test
- _test_bad_apptag(): apptag mismatch detection test
Also fix temp file creation to use ${UBLK_TEST_DIR}/fio_err_XXXXX instead of
creating in current directory.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove intermediate TDIR variable and set UBLK_TEST_DIR directly
in _prep_test(). Remove default initialization since the directory
is created dynamically when tests run.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Implement fsession support in the arm64 BPF JIT trampoline.
Extend the trampoline stack layout to store function metadata and
session cookies, and pass the appropriate metadata to fentry and
fexit programs. This mirrors the existing x86 behavior and enables
session cookies on arm64.
Acked-by: Puranjay Mohan <puranjay@kernel.org>
Tested-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260131144950.16294-3-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The added fsession does not prevent running on those architectures, that
haven't added fsession support.
For example, try to run fsession tests on arm64:
test_fsession_basic:PASS:fsession_test__open_and_load 0 nsec
test_fsession_basic:PASS:fsession_attach 0 nsec
check_result:FAIL:test_run_opts err unexpected error: -14 (errno 14)
In order to prevent such errors, add bpf_jit_supports_fsession() to guard
those architectures.
Fixes: 2d419c4465 ("bpf: add fsession support")
Acked-by: Puranjay Mohan <puranjay@kernel.org>
Tested-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260131144950.16294-2-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
While making some maps in Cilium read-only from the BPF side, we noticed
that the bpf_xdp_store_bytes proto is incorrect. In particular, the
verifier was throwing the following error:
; ret = ctx_store_bytes(ctx, l3_off + offsetof(struct iphdr, saddr),
&nat->address, 4, 0);
635: (79) r1 = *(u64 *)(r10 -144) ; R1=ctx() R10=fp0 fp-144=ctx()
636: (b4) w2 = 26 ; R2=26
637: (b4) w4 = 4 ; R4=4
638: (b4) w5 = 0 ; R5=0
639: (85) call bpf_xdp_store_bytes#190
write into map forbidden, value_size=6 off=0 size=4
nat comes from a BPF_F_RDONLY_PROG map, so R3 is a PTR_TO_MAP_VALUE.
The verifier checks the helper's memory access to R3 in
check_mem_size_reg, as it reaches ARG_CONST_SIZE argument. The third
argument has expected type ARG_PTR_TO_UNINIT_MEM, which includes the
MEM_WRITE flag. The verifier thus checks for a BPF_WRITE access on R3.
Given R3 points to a read-only map, the check fails.
Conversely, ARG_PTR_TO_UNINIT_MEM can also lead to the helper reading
from uninitialized memory.
This patch simply fixes the expected argument type to match that of
bpf_skb_store_bytes.
Fixes: 3f364222d0 ("net: xdp: introduce bpf_xdp_pointer utility routine")
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/r/9fa3c9f72d806e82541071c4df88b8cba28ad6a9.1769875479.git.paul.chaignon@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEn/sM2K9nqF/8FWzzDHRl3/mQkZwFAml91NkTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRAMdGXf+ZCRnJkSB/wOdPfielzOfa4tmEQZGXW/tHXRBTbM
l7o0WjZtpWdTlqGYyHNngwPC8ie8SwP+vo6H6D9hPmLyxoQhIg8Kgi0GXh2t6n3s
UgpC+aTTtkbOtIaJL5r4xamuoyxw0KN0Y0FJSX+JnV03qe4BsQvTNAPbTdST29Bu
OC7GquBY37B2qe04B51AgeSEuKlVV1jfUmwa0N2Ugdb/LEiKe8W8PmGIiv3RnHQI
Ec2R+Tw+VZ6yX/qIMKJVeykejAxPw9GVbtfH0sBb1ZgWKPGxAYdMmlulqTzpBl2A
8KDNmmWX23giO6k1iTnDVsfNFtGXZBMuH3EIJMkM+hBWk9ZN2h24ROY3
=q55P
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-6.20-20260131' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2026-01-31
This first 2 patches are by Biju Das, target the rcar_canfd driver and
add support for FD-only mode.
Lad Prabhakar's patches, also for the rcar_canfd driver add support
for the RZ/T2H SoC.
The last 2 patches are by Michael Tretter and me, target the sja1000
driver and clean up the CAN state handling.
* tag 'linux-can-next-for-6.20-20260131' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: sja1000: sja1000_err(): use error counter for error state
can: sja1000: sja1000_err(): make use of sja1000_get_berr_counter() to read error counters
can: rcar_canfd: Add RZ/T2H support
dt-bindings: can: renesas,rcar-canfd: Document RZ/T2H and RZ/N2H SoCs
dt-bindings: can: renesas,rcar-canfd: Document RZ/V2H(P) and RZ/V2N SoCs
dt-bindings: can: renesas,rcar-canfd: Specify reset-names
can: rcar_canfd: Add support for FD-Only mode
dt-bindings: can: renesas,rcar-canfd: Document renesas,fd-only property
====================
Link: https://patch.msgid.link/20260131101512.1958907-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Gal reports that BPF redirect increments dev->stats.tx_errors
on failure. This is not correct, most modern drivers completely
ignore dev->stats so these drops will be invisible to the user.
Core code should use the dedicated core stats which are folded
into device stats in dev_get_stats().
Note that we're switching from tx_errors to tx_dropped.
Core only has tx_dropped, hence presumably users already expect
that counter to increment for "stack" Tx issues.
Reported-by: Gal Pressman <gal@nvidia.com>
Link: https://lore.kernel.org/c5df3b60-246a-4030-9c9a-0a35cd1ca924@nvidia.com
Fixes: b4ab314149 ("bpf: Add redirect_neigh helper as redirect drop-in")
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260130033827.698841-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Including:
- Fix a performance regression cause by new Generic
IO-Page-Table code detected in Intel VT-d driver.
- Command queue flushing fix for NVidia version of the
ARM-SMMU-v3
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAml+LeMACgkQK/BELZcB
GuPi4xAA5T7+RG/KG244Wtb+jjiYg8FabKkPtubWw4PD3fVo2KW3Zkt3xHUtznDL
Lpm5Ywb7yJ2pgwy4E4H4mE3wkVAWy9K4WNzv+jr++SxXktBBi52xrqAzJspbQUGd
Twrdh7CGeoHQnuEVAm0OnUDA0JKx6/tLPI3XCHNH0zdas5eKnODDpE2w0etDpuTE
+fRXc+n2Z2P7UzjDBBrjb5xM+SyN0ImuBqk11D3psye2zZu/KLXZskLpwtNRm+fr
Jzl5LkTcOwCHk/Do/ZW2SpJLMV4p70QympEJRCfWu/wca+0R9APNdhUFlTPazKSj
eo+SUSUBYo7LTmrR4asyEr1UCEI0M+OCZAhYKQzVKNyPCFnnnKCufH6oTyxX17I4
nDg5piCtedwU9rUjX0VqRmx3ZA+0dILfcOGsgWV4mOvbO0nuQk6PHXfgTd3Fzdnh
2yjaUFWwUN/edCZHQAtk1RqmPu3LLXeUsx1eMngJlivHljMtGKGD18vmZzXZUNZL
aG/H5FRVDX63mNZNJyC90SWx3LMmhmOAWWBbvRTXtL3xvLgd6j+ZYYSwnghnYmpn
c9BE+POvLexRrRNXAFEChTHt9K2IWuPxBqGHOjLmM0Nds+lP0Ixh5EjuwpJW0gSY
k+z9MLtFFI3TJn6S3h7SAQpc7ngDiHfvxKSfcRZ1YwZIDXLwM3Q=
=/mf8
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
- Fix a performance regression cause by the new Generic IO-Page-Table
code detected in Intel VT-d driver
- Command queue flushing fix for NVidia version of the ARM-SMMU-v3
* tag 'iommu-fixes-v6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu/tegra241-cmdqv: Reset VCMDQ in tegra241_vcmdq_hw_init_user()
iommupt: Only cache flush memory changed by unmap
Just a few device-specific fixes; all small and mostly trivial,
should be pretty safe to take at the late stage.
-----BEGIN PGP SIGNATURE-----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=dXPH
-----END PGP SIGNATURE-----
Merge tag 'sound-6.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Just a few device-specific fixes; all small and mostly trivial, should
be pretty safe to take at the late stage"
* tag 'sound-6.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: sof_sdw: Add a quirk for Lenovo laptop using sidecar amps with cs42l43
ASoC: Intel: sof_es8336: fix headphone GPIO logic inversion
ASoC: amd: yc: Add DMI quirk for Acer TravelMate P216-41-TCO
ASoC: soc-acpi-intel-ptl-match: fix name_prefix of rt1320-2
ALSA: hda/realtek: Add quirk for Inspur S14-G1
ALSA: hda/realtek: fix right sounds and mute/micmute LEDs for HP machine
ALSA: hda/realtek: Really fix headset mic for TongFang X6AR55xU.
ALSA: hda/realtek - fixed speaker no sound
ASoC: amd: yc: Add ASUS ExpertBook PM1503CDA to quirks list
ASoC: fsl: imx-card: Do not force slot width to sample width
ASoC: dt-bindings: fsl,sai: Add support for i.MX952 platform
ASoC: cs35l45: Corrects ASP_TX5 DAPM widget channel
- kbuild: rpm-pkg: Generate debuginfo package manually, allowing
signed kernel modules in rpm package, again
- kbuild: Fix permissions of modules.builtin.modinfo
- kbuild: Do not run kernel-doc when building external modules
Cc: Ethan Zuo <yuxuan.zuo@outlook.com>
Cc: Holger Kiehl <Holger.Kiehl@dwd.de>
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rong Zhang <i@rong.moe>
Cc: Uday Shankar <ushankar@purestorage.com>
Cc: linux-kbuild@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
-----BEGIN PGP SIGNATURE-----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=2S41
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-6.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild fixes from Nicolas Schier:
- Generate rpm-pkg debuginfo package manually, allowing signed kernel
modules in rpm package, again
- Fix permissions of modules.builtin.modinfo
- Do not run kernel-doc when building external modules
* tag 'kbuild-fixes-6.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: Do not run kernel-doc when building external modules
kbuild: Fix permissions of modules.builtin.modinfo
kbuild: rpm-pkg: Generate debuginfo package manually
An upcoming change will add more channel parameters.
This leads to a lot of churn and very long lines.
Use a macro to encapsulate all of the shared values.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20260118-cros_ec-hwmon-pwm-v2-3-77eb1709b031@weissschuh.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use EC_CMD_PWM_GET_FAN_TARGET_RPM to retrieve the target fan speed.
The EC only supports this for the first fan.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20260118-cros_ec-hwmon-pwm-v2-2-77eb1709b031@weissschuh.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The wall of text of supported features is hard to read and messy to
extend. Split it into a definition list with an explanations for each
supported feature.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20260118-cros_ec-hwmon-pwm-v2-1-77eb1709b031@weissschuh.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for the P3T1035 & P3T2030 temperature sensor. While mostly
compatible with the TMP108, P3T1035 uses an 8-bit configuration register
instead of the 16-bit layout used by TMP108. Updated driver to handle
this difference during configuration read/write.
Signed-off-by: Mayank Mahajan <mayankmahajan.x@nxp.com>
Link: https://lore.kernel.org/r/20260119040459.2898998-2-mayankmahajan.x@nxp.com
[groeck: Reordered include files to retain alphabetic order]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
When calling of_parse_phandle_with_args(), the caller is responsible
to call of_node_put() to release the reference of device node.
In nct7363_present_pwm_fanin, it does not release the reference,
causing a resource leak.
Signed-off-by: Felix Gu <gu_0233@qq.com>
Link: https://lore.kernel.org/r/tencent_9717645269E4C07D3D131F52201E12E5E10A@qq.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
When calling of_parse_phandle_with_args(), the caller is responsible
to call of_node_put() to release the reference of device node.
In emc2305_of_parse_pwm_child, it does not release the reference,
causing a resource leak.
Signed-off-by: Felix Gu <gu_0233@qq.com>
Link: https://lore.kernel.org/r/tencent_738BA80BBF28F3440301EEE6F9E470165105@qq.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Update the coretemp documentation to reflect current driver capabilities:
- Extend the supported CPU model list to include Atom processors from
Bonnell through Jasper Lake, maintaining the original format with
model numbers and adding X86_FEATURE_DTHERM as the actual detection
mechanism. Added models: 0x37 (Bay Trail), 0x4a (Merrifield),
0x4c (Cherry Trail), 0x5a (Moorefield), 0x5c (Apollo Lake),
0x7a (Gemini Lake), 0x96 (Elkhart Lake), 0x9c (Jasper Lake)
- Update the description to note that per-package temperature sensing
is available on Sandy Bridge and all newer processors
- Clarify that TjMax is read from MSR_IA32_TEMPERATURE_TARGET on modern
CPUs (Nehalem and newer)
- Add TjMax values for newer Atom processor families to Appendix A:
- 22nm Silvermont/Bay Trail: E38xx at 110C, Z37xx at 90C
- 22nm Silvermont/Moorefield: Z35xx at 90C
- 14nm Airmont/Cherry Trail: Z8xxx at 90C
- 14nm Goldmont/Apollo Lake: 105C
- 14nm Goldmont Plus/Gemini Lake: 105C
- 10nm Tremont/Elkhart Lake: 105C
- 10nm Tremont/Jasper Lake: 105C
TjMax values obtained from Intel ARK and official datasheets:
- E3845: https://www.intel.com/content/www/us/en/products/sku/78475/intel-atom-processor-e3845-2m-cache-1-91-ghz/specifications.html
- Z3600/Z3700: https://www.intel.com/content/dam/www/public/us/en/documents/datasheets/atom-z36xxx-z37xxx-datasheet-vol-1.pdf
Signed-off-by: Laveesh Bansal <laveeshb@laveeshbansal.com>
Link: https://lore.kernel.org/r/20260106155426.547872-2-laveeshb@laveeshbansal.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Convert the ASpeed fan controller binding to DT schema format.
The '#size-cells' value is 0 rather 1.
Some users define more that 8 fan nodes where 2 fans share a PWM. The
driver seems to let the 2nd fan just overwrite the 1st one. That also
creates some addressing errors in the DT (duplicate addresses and wrong
unit-addresses).
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Link: https://lore.kernel.org/r/20260109-dev-dt-warnings-hwmon-v1-1-f2a84cdb0e1b@codeconstruct.com.au
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for customer ID 0x1621 found on ASRock Z590 Taichi
boards using the Nuvoton NCT6686D embedded controller.
This allows the driver to instantiate without requiring the
force=1 module parameter.
Tested on two separate ASRock Z590 Taichi boards, both with
EC firmware version 1.0 build 01/25/21.
Signed-off-by: Anj Duvnjak <avian@extremenerds.net>
Link: https://lore.kernel.org/r/20251222220942.10762-1-avian@extremenerds.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add hardware monitoring support for the Fintek F81968 Super I/O chip.
It is fully compatible with F81866.
Several products share compatibility with the F81866. To better distinguish
between them, ensure that the Product ID is displayed when the device is
probed.
Signed-off-by: Ji-Ze Hong (Peter Hong) <peter_hong@fintek.com.tw>
Link: https://lore.kernel.org/r/20251223051040.10227-1-peter_hong@fintek.com.tw
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
