strcpy() performs no bounds checking on the destination buffer, which
could result in linear overflows beyond the end of the buffer. Although
the source strings here are compile-time constants that fit within the
destination buffers, using strscpy() is the preferred approach as it
provides bounds checking and aligns with the kernel's deprecated API
guidelines.
This change converts the remaining strcpy() calls to strscpy(), matching
the pattern already used throughout other ACPI drivers in
drivers/acpi/*.c.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strcpy
Signed-off-by: Szymon Wilczek <szymonwilczek@gmx.com>
Reviewed-by: lihuisong@huawei.com
Link: https://lore.kernel.org/r/20251220173041.377376-1-szymonwilczek@gmx.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add VRM_E (0x33) and VRM_W (0x34) temperature sensor definitions to
sensors_family_amd_wrx_90 and enable them in the board config.
Signed-off-by: Jai Kith <kithfx@gmail.com>
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20260103085740.10644-1-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use sysfs_emit() over sprintf() to prevent potential overflows. In
hwmon_attr_show() that is totally impossible but looking other places
many still use sysfs_emit().
Also according Documentation/filesystems/sysfs.rst code should use
sysfs_emit().
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Link: https://lore.kernel.org/r/20251219-hwmon-fixes-v1-2-21b29097ea3b@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Currently if user of *sanitize_name() function gives nullptr for name
they get's ENOMEM. Logically it should be EINVAL.
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Link: https://lore.kernel.org/r/20251219-hwmon-fixes-v1-1-21b29097ea3b@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Switch to the generic PCI power management framework and remove legacy
.resume() callback. With the generic framework, the
standard PCI related work like:
- pci_save/restore_state()
- pci_enable/disable_device()
- pci_set_power_state()
is handled by the PCI core and this driver should implement only
device specific operations in its respective callback function.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Link: https://lore.kernel.org/r/20251216181401.598273-1-vaibhavgupta40@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Adding support for Pro WS TRX50-SAGE WIFI A, which is identical
sensors-wise to Pro WS TRX50-SAGE WIFI
Signed-off-by: Robert McIntyre <rjmcinty@hotmail.com>
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20251213200531.259435-4-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for ROG MAXIMUS X HERO. The support is incomplete because
the second EC, which provides part of the data, is inaccessible via the
kernel ec module.
Signed-off-by: Reis Holmes <reisholmes@pm.me>
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20251213200531.259435-3-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The acpi_power_meter driver's .notify() callback function,
acpi_power_meter_notify(), calls hwmon_device_unregister() under a lock
that is also acquired by callbacks in sysfs attributes of the device
being unregistered which is prone to deadlocks between sysfs access and
device removal.
Address this by moving the hwmon device removal in
acpi_power_meter_notify() outside the lock in question, but notice
that doing it alone is not sufficient because two concurrent
METER_NOTIFY_CONFIG notifications may be attempting to remove the
same device at the same time. To prevent that from happening, add a
new lock serializing the execution of the switch () statement in
acpi_power_meter_notify(). For simplicity, it is a static mutex
which should not be a problem from the performance perspective.
The new lock also allows the hwmon_device_register_with_info()
in acpi_power_meter_notify() to be called outside the inner lock
because it prevents the other notifications handled by that function
from manipulating the "resource" object while the hwmon device based
on it is being registered. The sending of ACPI netlink messages from
acpi_power_meter_notify() is serialized by the new lock too which
generally helps to ensure that the order of handling firmware
notifications is the same as the order of sending netlink messages
related to them.
In addition, notice that hwmon_device_register_with_info() may fail
in which case resource->hwmon_dev will become an error pointer,
so add checks to avoid attempting to unregister the hwmon device
pointer to by it in that case to acpi_power_meter_notify() and
acpi_power_meter_remove().
Fixes: 16746ce8ad ("hwmon: (acpi_power_meter) Replace the deprecated hwmon_device_register")
Closes: https://lore.kernel.org/linux-hwmon/CAK8fFZ58fidGUCHi5WFX0uoTPzveUUDzT=k=AAm4yWo3bAuCFg@mail.gmail.com/
Reported-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
After commit 778b8ebe51 ("docs: Move the python libraries to
tools/lib/python"), building an external module with any value of W=
against the output of install-extmod-build fails with:
$ make -C /usr/lib/modules/6.19.0-rc7-00108-g4d310797262f/build M=$PWD W=1
make: Entering directory '/usr/lib/modules/6.19.0-rc7-00108-g4d310797262f/build'
make[1]: Entering directory '...'
CC [M] ...
Traceback (most recent call last):
File "/usr/lib/modules/6.19.0-rc7-00108-g4d310797262f/build/scripts/kernel-doc.py", line 339, in <module>
main()
~~~~^^
File "/usr/lib/modules/6.19.0-rc7-00108-g4d310797262f/build/scripts/kernel-doc.py", line 295, in main
from kdoc.kdoc_files import KernelFiles # pylint: disable=C0415
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
ModuleNotFoundError: No module named 'kdoc'
scripts/lib was included in the build directory from find_in_scripts but
after the move to tools/lib/python, it is no longer included, breaking
kernel-doc.py.
Commit eba6ffd126 ("docs: kdoc: move kernel-doc to tools/docs") breaks
this even further by moving kernel-doc outside of scripts as well, so it
cannot be found when called by cmd_checkdoc.
$ make -C /usr/lib/modules/6.19.0-rc7-next-20260130/build M=$PWD W=1
make: Entering directory '/usr/lib/modules/6.19.0-rc7-next-20260130/build'
make[1]: Entering directory '...'
CC [M] ...
python3: can't open file '/usr/lib/modules/6.19.0-rc7-next-20260130/build/tools/docs/kernel-doc': [Errno 2] No such file or directory
While kernel-doc could be useful for external modules, it is more useful
for in-tree documentation that will be build and included in htmldocs.
Rather than including it in install-extmod-build, just skip running
kernel-doc for the external module build.
Cc: stable@vger.kernel.org
Fixes: 778b8ebe51 ("docs: Move the python libraries to tools/lib/python")
Reported-by: Rong Zhang <i@rong.moe>
Closes: https://lore.kernel.org/20260129175321.415295-1-i@rong.moe/
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260130-kbuild-skip-kernel-doc-extmod-v1-1-58443d60131a@kernel.org
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Signed-off-by: Nicolas Schier <nsc@kernel.org>
The BSS_DECRYPTED section that gets emitted into .bss will be empty if
CONFIG_AMD_MEM_ENCRYPT is not defined. However, due to the fact that it
is injected into .bss rather than emitted as a separate section, the
2 MiB alignment that it specifies is still taken into account
unconditionally, pushing .bss out to the next 2 MiB boundary, leaving
a gap that is never freed.
So only emit a non-empty BSS_DECRYPTED section if it is going to be
used. In that case, it would still be nice to free the padding, but
that is left for later.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20260108092526.28586-23-ardb@kernel.org
The struct ublk_io is in fact accessed in __ublk_complete_rq() after the
comment. But it's not racy to access the ublk_io between clearing its
UBLK_IO_FLAG_OWNED_BY_SRV flag and completing the request, as no other
thread can use the ublk_io in the meantime.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Create and use a temporary directory for the files created during
test runs. If TMPDIR environment variable is set use it as a base
for the temporary directory path.
TMPDIR=/mnt/scratch make run_tests
and
TMPDIR=/mnt/scratch ./test_generic_01.sh
will place test directory under /mnt/scratch
Signed-off-by: Alexander Atanasov <alex@zazolabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Log test start and end time in dmesg, so generated log messages
during the test run can be linked to specific test from the test
suite.
(switch to `date +%F %T`)
Signed-off-by: Alexander Atanasov <alex@zazolabs.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The null target doesn't handle IO, so disable partition scan to avoid IO
failures caused by integrity verification during the kernel's partition
table read.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Encapsulate each test case in its own function that creates the
device, runs checks, and deletes only that device. This avoids
calling _cleanup_test multiple times.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This test exercises partition scanning behavior, so move it to
the test_part_* group for consistency.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add test_part_01.sh to test the UBLK_F_NO_AUTO_PART_SCAN feature
flag which allows suppressing automatic partition scanning during
device startup while still allowing manual partition probing.
The test verifies:
- Normal behavior: partitions are auto-detected without the flag
- With flag: partitions are not auto-detected during START_DEV
- Manual scan: blockdev --rereadpt works with the flag
Also update kublk tool to support --no_auto_part_scan option and
recognize the feature flag.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add automatic TID derivation in test_common.sh based on the script
filename. The TID is extracted by stripping the "test_" prefix and
".sh" suffix from the script name (e.g., test_loop_01.sh -> loop_01).
This removes the need for each test script to manually define TID,
reducing boilerplate and preventing potential mismatches between
the script name and TID. Scripts can still override TID after
sourcing test_common.sh if needed.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a new feature flag UBLK_F_NO_AUTO_PART_SCAN to allow users to suppress
automatic partition scanning when starting a ublk device.
This is useful for some cases in which user don't want to scan
partitions.
Users still can manually trigger partition scanning later when appropriate
using standard tools (e.g., partprobe, blockdev --rereadpt).
Reported-by: Yoav Cohen <yoav@nvidia.com>
Link: https://lore.kernel.org/linux-block/DM4PR12MB63280C5637917C071C2F0D65A9A8A@DM4PR12MB6328.namprd12.prod.outlook.com/
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add !list_empty(&fcmd->node) check in ublk_batch_cancel_cmd() to ensure
the fcmd hasn't already been removed from the list. Once an fcmd is
removed from the list, it's considered claimed by whoever removed it
and will be freed by that path.
Meantime switch to list_del_init() for deleting it from list.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ublk_ctrl_start_recovery() only uses its const struct ublksrv_ctrl_cmd *
header argument to log the dev_id. But this value is already available
in struct ublk_device's ub_number field. So log ub_number instead and
drop the unused header argument.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
struct ublksrv_ctrl_cmd is part of the io_uring_sqe, which may lie in
userspace-mapped memory. It's racy to access its fields with normal
loads, as userspace may write to them concurrently. Use READ_ONCE() to
copy the ublksrv_ctrl_cmd from the io_uring_sqe to the stack. Use the
local copy in place of the one in the io_uring_sqe.
Fixes: 87213b0d84 ("ublk: allow non-blocking ctrl cmds in IO_URING_F_NONBLOCK issue")
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ublk_ctrl_cmd_dump() accesses (header *)sqe->cmd before
IO_URING_F_SQE128 flag check. This could cause out of boundary memory
access.
Move the SQE128 flag check earlier in ublk_ctrl_uring_cmd() to return
-EINVAL immediately if the flag is not set.
Fixes: 71f28f3136 ("ublk_drv: add io_uring based userspace block driver")
Signed-off-by: Govindarajulu Varadarajan <govind.varadar@gmail.com>
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Restricted pointers ("%pK") were never meant to be used
through printk(). They can acquire sleeping locks in atomic contexts.
Switch to %px over the more secure %p as this usage is a debugging aid,
gated behind CONFIG_DEBUG_VIRTUAL and used by WARN().
Link: https://lore.kernel.org/lkml/20250113171731-dc10e3c1-da64-4af0-b767-7c7070468023@linutronix.de/
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
On big-endian systems the 32-bit low and high halves need to be swapped
for the underlying assembly implementation to work correctly.
Fixes: fd1d362600 ("ARM: implement memset32 & memset64")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
The Enable bits in CMDQV/VINTF/VCMDQ_CONFIG registers do not actually reset
the HW registers. So, the driver explicitly clears all the registers when a
VINTF or VCMDQ is being initialized calling its hw_deinit() function.
However, a userspace VCMDQ is not properly reset, unlike an in-kernel VCMDQ
getting reset in tegra241_vcmdq_hw_init().
Meanwhile, tegra241_vintf_hw_init() calling tegra241_vintf_hw_deinit() will
not deinit any VCMDQ, since there is no userspace VCMDQ mapped to the VINTF
at that stage.
Then, this may result in dirty VCMDQ registers, which can fail the VM.
Like tegra241_vcmdq_hw_init(), reset a VCMDQ in tegra241_vcmdq_hw_init() to
fix this bug. This is required by a host kernel.
Fixes: 6717f26ab1e7 ("iommu/tegra241-cmdqv: Add user-space use support")
Cc: stable@vger.kernel.org
Reported-by: Bao Nguyen <ncqb@google.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Mykyta Yatsenko says:
====================
The BPF verifier validates pointers to special map fields (timers,
workqueues, task_work) through separate functions that share nearly
identical logic. This creates code duplication because of the
inconsistent data structure layout in struct bpf_call_arg_meta struct
bpf_kfunc_call_arg_meta.
This series contains 2 commits:
1. Introduces struct bpf_map_desc to provide a unified representation
for map pointer and uid tracking. Previously, bpf_call_arg_meta used
separate map_ptr and map_uid fields while bpf_kfunc_call_arg_metaused an
anonymous inline struct. This inconsistency made it harder to share
validation code between the two paths.
2. Consolidates the validation logic for BPF_TIMER, BPF_WORKQUEUE, and
BPF_TASK_WORK field types into a single check_map_field_pointer()
function. This eliminates process_wq_func() and process_task_work_func()
entirely, and simplifies process_timer_func() to just the PREEMPT_RT
check before calling the unified validation. The result is fewer
lines of code with clearer structure for future maintenance.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Changes in v2:
- Added Signed-off-by to the top commit.
- Link to v1: https://lore.kernel.org/r/20260129-verif_special_fields-v1-0-d310b7f146c8@meta.com
====================
Link: https://patch.msgid.link/20260130-verif_special_fields-v2-0-2c59e637da7d@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Consolidate all logic for verifying special map fields in the single
function check_map_field_pointer().
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20260130-verif_special_fields-v2-2-2c59e637da7d@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introduce struct bpf_map_desc to hold bpf_map pointer and map uid. Use
this struct in both bpf_call_arg_meta and bpf_kfunc_call_arg_meta
instead of having different representations:
- bpf_call_arg_meta had separate map_ptr and map_uid fields
- bpf_kfunc_call_arg_meta had an anonymous inline struct
This unifies the map fields layout across both metadata structures,
making the code more consistent and preparing for further refactoring of
map field pointer validation.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20260130-verif_special_fields-v2-1-2c59e637da7d@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
If userspace thread has held f2fs rw semaphore, due to its low priority,
it could be runnable or preempted state for long time, during the time,
it will block high priority thread which is trying to grab the same rw
semaphore, e.g. cp_rwsem, io_rwsem...
To fix such issue, let's detect thread's priority when it tries to grab
f2fs_rwsem lock, if the priority is lower than a priority threshold, let's
uplift the priority before it enters into critical region of lock, and
restore the priority after it leaves from critical region.
Meanwhile, introducing two new sysfs nodes:
- /sys/fs/f2fs/<disk>/adjust_lock_priority, it is used to control whether
the functionality is enable or not.
========== ==================
Flag_Value Flag_Description
========== ==================
0x00000000 Disabled (default)
0x00000001 cp_rwsem
0x00000002 node_change
0x00000004 node_write
0x00000008 gc_lock
0x00000010 cp_global
0x00000020 io_rwsem
========== ==================
- /sys/fs/f2fs/<disk>/lock_duration_priority, it is used to control
priority threshold.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When overwriting already allocated blocks, f2fs_iomap_begin() calls
f2fs_overwrite_io() to check block mappings. However,
f2fs_overwrite_io() iterates through all mapped blocks in the range,
which can be inefficient for fragmented files with large I/O requests.
This patch optimizes f2fs_overwrite_io() by adding a 'check_first'
parameter and introducing __f2fs_overwrite_io() helper. When called from
f2fs_iomap_begin(), we only check the first mapping to determine if the
range is already allocated, which is sufficient for setting
map.m_may_create.
This optimization significantly reduces the number of f2fs_map_blocks()
calls in f2fs_overwrite_io() when called from f2fs_iomap_begin(),
especially for fragmented files with large I/O requests.
Cc: stable@kernel.org
Fixes: 351bc76133 ("f2fs: optimize f2fs DIO overwrites")
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Reviewed-by: Sunmin Jeong <s_min.jeong@samsung.com>
Signed-off-by: Yeongjin Gil <youngjin.gil@samsung.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This reverts commit d7cd421da9.
As reported by Al Viro, the TCP ULP support for SMC is fundamentally
broken. The implementation attempts to convert an active TCP socket
into an SMC socket by modifying the underlying `struct file`, dentry,
and inode in-place, which violates core VFS invariants that assume
these structures are immutable for an open file, creating a risk of
use after free errors and general system instability.
Given the severity of this design flaw and the fact that cleaner
alternatives (e.g., LD_PRELOAD, BPF) exist for legacy application
transparency, the correct course of action is to remove this feature
entirely.
Fixes: d7cd421da9 ("net/smc: Introduce TCP ULP support")
Link: https://lore.kernel.org/netdev/Yus1SycZxcd+wHwz@ZenIV/
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260128055452.98251-1-alibuda@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The AX25_DAMA_MASTER option has been unimplemented and marked broken
ever since it was introduced in 2007 in commit 954b2e7f4c ("[NET]
AX.25 Kconfig and docs updates and fixes"). At this point, it is very
unlikely it will be implemented. Remove it.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Link: https://patch.msgid.link/20260129080908.44710-1-enelsonmoore@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Document the Inline Crypto Engine (ICE) on the Milos SoC.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When commit 0e1a4d427f ("crypto: caam: Unembed net_dev structure in
dpaa2") converted embedded net_device to dynamically allocated pointers,
it added cleanup in dpaa2_dpseci_disable() but missed adding cleanup in
dpaa2_dpseci_free() for error paths.
This causes memory leaks when dpaa2_dpseci_dpio_setup() fails during probe
due to DPIO devices not being ready yet. The kernel's deferred probe
mechanism handles the retry successfully, but the netdevs allocated during
the failed probe attempt are never freed, resulting in kmemleak reports
showing multiple leaked netdev-related allocations all traced back to
dpaa2_caam_probe().
Fix this by preserving the CPU mask of allocated netdevs during setup and
using it for cleanup in dpaa2_dpseci_free(). This approach ensures that
only the CPUs that actually had netdevs allocated will be cleaned up,
avoiding potential issues with CPU hotplug scenarios.
Fixes: 0e1a4d427f ("crypto: caam: Unembed net_dev structure in dpaa2")
Signed-off-by: Jianpeng Chang <jianpeng.chang.cn@windriver.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The device requires more time to process queue stop and function stop
mailbox commands compared to other mailbox commands . In the current
driver, the mailbox processing wait time for queue stop and function
stop is less than the device timeout, which may cause the driver to
incorrectly assume that the mailbox processing has failed. Therefore,
the driver wait time for queue stop and function stop should be set to
be greater than the device timeout. And PF and VF communication
relies on mailbox, the communication wait time should also be modified.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The malibox needs to be triggered by a 128bit atomic operation.
The reason is that the PF and VFs of the device share the mmio memory
of the mailbox, and the mutex cannot lock mailbox operations in
different functions, especially when passing through VFs to
virtual machines.
Currently, the write operation to the mailbox is already a 128-bit
atomic write. The read operation also needs to be modified to a
128-bit atomic read. Since there is no general 128-bit IO memory
access API in the current ARM64 architecture, and the stp and ldp
instructions do not guarantee atomic access to device memory, they
cannot be extracted as a general API. Therefore, the 128-bit atomic
read and write operations need to be implemented in the driver.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
