After system hibernation, I3C Dynamic Addresses may be reassigned at boot
and no longer match the values recorded before suspend. Introduce
i3c_master_do_daa_ext() to handle this situation.
The restore procedure is straightforward: issue a Reset Dynamic Address
Assignment (RSTDAA), then run the standard DAA sequence. The existing DAA
logic already supports detecting and updating devices whose dynamic
addresses differ from previously known values.
Refactor the DAA path by introducing a shared helper used by both the
normal i3c_master_do_daa() path and the new extended restore function,
and correct the kernel-doc in the process.
Export i3c_master_do_daa_ext() so that master drivers can invoke it from
their PM restore callbacks.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260123063325.8210-2-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The devs_lock spinlock introduced when adding support for ibi:s was
never initialized.
Fixes: e389b1d72a ("i3c: dw: Add support for in-band interrupts")
Suggested-by: Jani Nurminen <jani.nurminen@windriver.com>
Signed-off-by: Fredrik Markstrom <fredrik.markstrom@est.tech>
Reviewed-by: Ivar Holmqvist <ivar.holmqvist@est.tech>
Link: https://patch.msgid.link/20260116-i3c_dw_initialize_spinlock-v3-1-cf707b6ed75f@est.tech
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
With SEV-TIO the low-level TSM driver is responsible for allocating a
Stream ID. The Stream ID needs to be unique within each IDE partner
port. Fix the Stream ID selection to reuse the host bridge stream
resource id which is a pool of 256 ids per host bridge on AMD platforms.
Otherwise, only one device per-host bridge can establish Selective
Stream IDE.
Fixes: 4be423572d ("crypto/ccp: Implement SEV-TIO PCIe IDE (phase1)")
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://patch.msgid.link/20260123053057.1350569-3-aik@amd.com
[djbw: clarify end user impact in changelog]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The current number of streams in AMD TSM is 1 which is too little,
the core uses 255. Also, even if the module parameter is increased,
calling pci_ide_set_nr_streams() second time triggers WARN_ON.
Simplify the code by sticking to the PCI core defaults.
Fixes: 4be423572d ("crypto/ccp: Implement SEV-TIO PCIe IDE (phase1)")
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://patch.msgid.link/20260123053057.1350569-2-aik@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In order to do a user space stacktrace the current task needs to be a user
task that has executed in user space. It use to be possible to test if a
task is a user task or not by simply checking the task_struct mm field. If
it was non NULL, it was a user task and if not it was a kernel task.
But things have changed over time, and some kernel tasks now have their
own mm field.
An idea was made to instead test PF_KTHREAD and two functions were used to
wrap this check in case it became more complex to test if a task was a
user task or not[1]. But this was rejected and the C code simply checked
the PF_KTHREAD directly.
It was later found that not all kernel threads set PF_KTHREAD. The io-uring
helpers instead set PF_USER_WORKER and this needed to be added as well.
But checking the flags is still not enough. There's a very small window
when a task exits that it frees its mm field and it is set back to NULL.
If perf were to trigger at this moment, the flags test would say its a
user space task but when perf would read the mm field it would crash with
at NULL pointer dereference.
Now there are flags that can be used to test if a task is exiting, but
they are set in areas that perf may still want to profile the user space
task (to see where it exited). The only real test is to check both the
flags and the mm field.
Instead of making this modification in every location, create a new
is_user_task() helper function that does all the tests needed to know if
it is safe to read the user space memory or not.
[1] https://lore.kernel.org/all/20250425204120.639530125@goodmis.org/
Fixes: 90942f9fac ("perf: Use current->flags & PF_KTHREAD|PF_USER_WORKER instead of current->mm == NULL")
Closes: https://lore.kernel.org/all/0d877e6f-41a7-4724-875d-0b0a27b8a545@roeck-us.net/
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260129102821.46484722@gandalf.local.home
Andrea reported the dl_server getting stuck for him. He tracked it
down to a state where dl_server_start() saw dl_defer_running==1, but
the dl_server's job is no longer valid at the time of
dl_server_start().
In the state diagram this corresponds to [4] D->A (or dl_server_stop()
due to no more runnable tasks) followed by [1], which in case of a
lapsed deadline must then be A->B.
Now our A has dl_defer_running==1, while B demands
dl_defer_running==0, therefore it must get cleared when the CBS wakeup
rules demand a replenish.
Fixes: a110a81c52 ("sched/deadline: Deferrable dl server")
Reported-by: Andrea Righi arighi@nvidia.com
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Tested-by: Andrea Righi arighi@nvidia.com
Link: https://lkml.kernel.org/r/20260123161645.2181752-1-arighi@nvidia.com
Link: https://patch.msgid.link/20260130124100.GC1079264@noisy.programming.kicks-ass.net
Rework this code that was totally busted at least as of my most
recent changes. Introduce a separate list for delayed delegations
so that they can't get lost and don't clutter up the returns list.
Add a missing spin_unlock in the helper marking it as a regular
pending return.
Fixes: 0ebe655bd0 ("NFS: add a separate delegation return list")
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Drop the pointless delegation->lock held over setting multiple
atomic bits in different structures, and use separate labels
for the delay vs abort cases.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
This will allow to simplify the error handling flow.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Replace the integer used as boolean with a bool type, and tidy up
the prototype and top of function comment.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
The caller doesn't check the return value, so drop it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
None of the callers checks the return value, so drop it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
The driver uses separate error printing and error returning at probe()
for locations where the error value is hard-coded and can't be
EPROBE_DEFER. This helps to omit the extra return value check which is
done in dev_err_probe().
Using the dev_err_probe() has some other benefits besides handling the
-EPROBE_DEFER though, like standardizing the print for error numbers.
Some believe thes outweigh the benefit of skipping the extra check.
Use dev_err_probe() consistently in the bd71828 power-supply probe.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/aWi_GG74sZRfajA_@mva-rohm
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Jiri Olsa says:
====================
x86/fgraph,bpf: Fix ORC stack unwind from kprobe_multi
hi,
Mahe reported missing function from stack trace on top of kprobe multi
program. It turned out the latest fix [1] needs some more fixing.
v2 changes:
- keep the unwind same as for kprobes, attached function
is part of entry probe stacktrace, not kretprobe [Steven]
- several change in trigger bench [Andrii]
- added selftests for standard kprobes and fentry/fexit probes [Andrii]
Note I'll try to add similar stacktrace adjustment for fentry/fexit
in separate patchset to not complicate this change.
thanks,
jirka
[1] https://lore.kernel.org/bpf/20251104215405.168643-1-jolsa@kernel.org/
---
====================
Link: https://patch.msgid.link/20260126211837.472802-1-jolsa@kernel.org
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Adding support to call bpf_get_stackid helper from trigger programs,
so far added for kprobe multi.
Adding the --stacktrace/-g option to enable it.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260126211837.472802-7-jolsa@kernel.org
Adding test that attaches fentry/fexitand verifies the
ORC stacktrace matches expected functions.
The test is only for ORC unwinder to keep it simple.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260126211837.472802-6-jolsa@kernel.org
Adding test that attaches kprobe/kretprobe and verifies the
ORC stacktrace matches expected functions.
The test is only for ORC unwinder to keep it simple.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260126211837.472802-5-jolsa@kernel.org
We now include the attached function in the stack trace,
fixing the test accordingly.
Fixes: c9e208fa93 ("selftests/bpf: Add stacktrace ips test for kprobe_multi/kretprobe_multi")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260126211837.472802-4-jolsa@kernel.org
Mahe reported missing function from stack trace on top of kprobe
multi program. The missing function is the very first one in the
stacktrace, the one that the bpf program is attached to.
# bpftrace -e 'kprobe:__x64_sys_newuname* { print(kstack)}'
Attaching 1 probe...
do_syscall_64+134
entry_SYSCALL_64_after_hwframe+118
('*' is used for kprobe_multi attachment)
The reason is that the previous change (the Fixes commit) fixed
stack unwind for tracepoint, but removed attached function address
from the stack trace on top of kprobe multi programs, which I also
overlooked in the related test (check following patch).
The tracepoint and kprobe_multi have different stack setup, but use
same unwind path. I think it's better to keep the previous change,
which fixed tracepoint unwind and instead change the kprobe multi
unwind as explained below.
The bpf program stack unwind calls perf_callchain_kernel for kernel
portion and it follows two unwind paths based on X86_EFLAGS_FIXED
bit in pt_regs.flags.
When the bit set we unwind from stack represented by pt_regs argument,
otherwise we unwind currently executed stack up to 'first_frame'
boundary.
The 'first_frame' value is taken from regs.rsp value, but ftrace_caller
and ftrace_regs_caller (ftrace trampoline) functions set the regs.rsp
to the previous stack frame, so we skip the attached function entry.
If we switch kprobe_multi unwind to use the X86_EFLAGS_FIXED bit,
we set the start of the unwind to the attached function address.
As another benefit we also cut extra unwind cycles needed to reach
the 'first_frame' boundary.
The speedup can be measured with trigger bench for kprobe_multi
program and stacktrace support.
- trigger bench with stacktrace on current code:
kprobe-multi : 0.810 ± 0.001M/s
kretprobe-multi: 0.808 ± 0.001M/s
- and with the fix:
kprobe-multi : 1.264 ± 0.001M/s
kretprobe-multi: 1.401 ± 0.002M/s
With the fix, the entry probe stacktrace:
# bpftrace -e 'kprobe:__x64_sys_newuname* { print(kstack)}'
Attaching 1 probe...
__x64_sys_newuname+9
do_syscall_64+134
entry_SYSCALL_64_after_hwframe+118
The return probe skips the attached function, because it's no longer
on the stack at the point of the unwind and this way is the same how
standard kretprobe works.
# bpftrace -e 'kretprobe:__x64_sys_newuname* { print(kstack)}'
Attaching 1 probe...
do_syscall_64+134
entry_SYSCALL_64_after_hwframe+118
Fixes: 6d08340d1e ("Revert "perf/x86: Always store regs->ip in perf_callchain_kernel()"")
Reported-by: Mahe Tardy <mahe.tardy@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/bpf/20260126211837.472802-3-jolsa@kernel.org
The previous change (Fixes commit) messed up the rsp register value,
which is wrong because it's already adjusted with FRAME_SIZE, we need
the original rsp value.
This change does not affect fprobe current kernel unwind, the !perf_hw_regs
path perf_callchain_kernel:
if (perf_hw_regs(regs)) {
if (perf_callchain_store(entry, regs->ip))
return;
unwind_start(&state, current, regs, NULL);
} else {
unwind_start(&state, current, NULL, (void *)regs->sp);
}
which uses pt_regs.sp as first_frame boundary (FRAME_SIZE shift makes
no difference, unwind stil stops at the right frame).
This change fixes the other path when we want to unwind directly from
pt_regs sp/fp/ip state, which is coming in following change.
Fixes: 20a0bc1027 ("x86/fgraph,bpf: Fix stack ORC unwind from kprobe_multi return probe")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/bpf/20260126211837.472802-2-jolsa@kernel.org
-----BEGIN PGP SIGNATURE-----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=A82v
-----END PGP SIGNATURE-----
Merge tag 'ib-mfd-clk-gpio-power-regulator-rtc-v6.20' into psy-next
Merge immutable branch between MFD, Clk, GPIO, Power, Regulator and RTC
due for the v6.20 merge window to apply further cleanups on top of the
BD72720 power-supply driver contained in this branch.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add two flags for KVM_CAP_X2APIC_API to allow userspace to control support
for Suppress EOI Broadcasts when using a split IRQCHIP (I/O APIC emulated
by userspace), which KVM completely mishandles. When x2APIC support was
first added, KVM incorrectly advertised and "enabled" Suppress EOI
Broadcast, without fully supporting the I/O APIC side of the equation,
i.e. without adding directed EOI to KVM's in-kernel I/O APIC.
That flaw was carried over to split IRQCHIP support, i.e. KVM advertised
support for Suppress EOI Broadcasts irrespective of whether or not the
userspace I/O APIC implementation supported directed EOIs. Even worse,
KVM didn't actually suppress EOI broadcasts, i.e. userspace VMMs without
support for directed EOI came to rely on the "spurious" broadcasts.
KVM "fixed" the in-kernel I/O APIC implementation by completely disabling
support for Suppress EOI Broadcasts in commit 0bcc3fb95b ("KVM: lapic:
stop advertising DIRECTED_EOI when in-kernel IOAPIC is in use"), but
didn't do anything to remedy userspace I/O APIC implementations.
KVM's bogus handling of Suppress EOI Broadcast is problematic when the
guest relies on interrupts being masked in the I/O APIC until well after
the initial local APIC EOI. E.g. Windows with Credential Guard enabled
handles interrupts in the following order:
1. Interrupt for L2 arrives.
2. L1 APIC EOIs the interrupt.
3. L1 resumes L2 and injects the interrupt.
4. L2 EOIs after servicing.
5. L1 performs the I/O APIC EOI.
Because KVM EOIs the I/O APIC at step #2, the guest can get an interrupt
storm, e.g. if the IRQ line is still asserted and userspace reacts to the
EOI by re-injecting the IRQ, because the guest doesn't de-assert the line
until step #4, and doesn't expect the interrupt to be re-enabled until
step #5.
Unfortunately, simply "fixing" the bug isn't an option, as KVM has no way
of knowing if the userspace I/O APIC supports directed EOIs, i.e.
suppressing EOI broadcasts would result in interrupts being stuck masked
in the userspace I/O APIC due to step #5 being ignored by userspace. And
fully disabling support for Suppress EOI Broadcast is also undesirable, as
picking up the fix would require a guest reboot, *and* more importantly
would change the virtual CPU model exposed to the guest without any buy-in
from userspace.
Add KVM_X2APIC_ENABLE_SUPPRESS_EOI_BROADCAST and
KVM_X2APIC_DISABLE_SUPPRESS_EOI_BROADCAST flags to allow userspace to
explicitly enable or disable support for Suppress EOI Broadcasts. This
gives userspace control over the virtual CPU model exposed to the guest,
as KVM should never have enabled support for Suppress EOI Broadcast without
userspace opt-in. Not setting either flag will result in legacy quirky
behavior for backward compatibility.
Disallow fully enabling SUPPRESS_EOI_BROADCAST when using an in-kernel
I/O APIC, as KVM's history/support is just as tragic. E.g. it's not clear
that commit c806a6ad35 ("KVM: x86: call irq notifiers with directed EOI")
was entirely correct, i.e. it may have simply papered over the lack of
Directed EOI emulation in the I/O APIC.
Note, Suppress EOI Broadcasts is defined only in Intel's SDM, not in AMD's
APM. But the bit is writable on some AMD CPUs, e.g. Turin, and KVM's ABI
is to support Directed EOI (KVM's name) irrespective of guest CPU vendor.
Fixes: 7543a635aa ("KVM: x86: Add KVM exit for IOAPIC EOIs")
Closes: https://lore.kernel.org/kvm/7D497EF1-607D-4D37-98E7-DAF95F099342@nutanix.com
Cc: stable@vger.kernel.org
Suggested-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Khushit Shah <khushit.shah@nutanix.com>
Link: https://patch.msgid.link/20260123125657.3384063-1-khushit.shah@nutanix.com
[sean: clean up minor formatting goofs and fix a comment typo]
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a flag to track when KVM is actively configuring its CPU caps, and
WARN if a cap is set or cleared if KVM isn't in its configuration stage.
Modifying CPU caps after {svm,vmx}_set_cpu_caps() can be fatal to KVM, as
vendor setup code expects the CPU caps to be frozen at that point, e.g.
will do additional configuration based on the caps.
Rename kvm_set_cpu_caps() to kvm_initialize_cpu_caps() to pair with the
new "finalize", and to make it more obvious that KVM's CPU caps aren't
fully configured within the function.
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Link: https://patch.msgid.link/20260128014310.3255561-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When kvm-intel.ko refuses to load due to a mismatched VMCS config, print
all mismatching offsets+values to make it easier to debug goofs during
development, and to make it at least feasible to triage failures that
occur during production. E.g. if a physical core is flaky or is running
with the "wrong" microcode patch loaded, then a CPU can get a legitimate
mismatch even without KVM bugs.
Print the mismatches as 32-bit values as a compromise between hand coding
every field (to provide precise information) and printing individual bytes
(requires more effort to deduce the mismatch bit(s)). All fields in the
VMCS config are either 32-bit or 64-bit values, i.e. in many cases,
printing 32-bit values will be 100% precise, and in the others it's close
enough, especially when considering that MSR values are split into EDX:EAX
anyways.
E.g. on mismatch CET entry/exit controls, KVM will print:
kvm_intel: VMCS config on CPU 0 doesn't match reference config:
Offset 76 REF = 0x107fffff, CPU0 = 0x007fffff, mismatch = 0x10000000
Offset 84 REF = 0x0010f3ff, CPU0 = 0x0000f3ff, mismatch = 0x00100000
Opportunistically tweak the wording on the initial error message to say
"mismatch" instead of "inconsistent", as the VMCS config itself isn't
inconsistent, and the wording conflates the cross-CPU compatibility check
with the error_on_inconsistent_vmcs_config knob that treats inconsistent
VMCS configurations as errors (e.g. if a CPU supports CET entry controls
but no CET exit controls).
Cc: Jim Mattson <jmattson@google.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Link: https://patch.msgid.link/20260128014310.3255561-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Explicitly configure KVM's supported XSS as part of each vendor's setup
flow to fix a bug where clearing SHSTK and IBT in kvm_cpu_caps, e.g. due
to lack of CET XFEATURE support, makes kvm-intel.ko unloadable when nested
VMX is enabled, i.e. when nested=1. The late clearing results in
nested_vmx_setup_{entry,exit}_ctls() clearing VM_{ENTRY,EXIT}_LOAD_CET_STATE
when nested_vmx_setup_ctls_msrs() runs during the CPU compatibility checks,
ultimately leading to a mismatched VMCS config due to the reference config
having the CET bits set, but every CPU's "local" config having the bits
cleared.
Note, kvm_caps.supported_{xcr0,xss} are unconditionally initialized by
kvm_x86_vendor_init(), before calling into vendor code, and not referenced
between ops->hardware_setup() and their current/old location.
Fixes: 69cc3e8865 ("KVM: x86: Add XSS support for CET_KERNEL and CET_USER")
Cc: stable@vger.kernel.org
Cc: Mathias Krause <minipli@grsecurity.net>
Cc: John Allen <john.allen@amd.com>
Cc: Rick Edgecombe <rick.p.edgecombe@intel.com>
Cc: Chao Gao <chao.gao@intel.com>
Cc: Binbin Wu <binbin.wu@linux.intel.com>
Cc: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Link: https://patch.msgid.link/20260128014310.3255561-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
-----BEGIN PGP SIGNATURE-----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=oo3J
-----END PGP SIGNATURE-----
Merge tag 'block-6.19-20260130' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- Fix for an accounting leak in bcache that's been there forever,
and a related dead code removal
- Revert of a fix for rnbd that went into this series, but depends
on other changes that are staged for 7.0
- NVMe pull request via Keith:
- TCP target completion race condition fix (Ming)
- DMA descriptor cleanup fix (Roger)
* tag 'block-6.19-20260130' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
bcache: fix I/O accounting leak in detached_dev_do_request
bcache: remove dead code in detached_dev_do_request
nvme-pci: DMA unmap the correct regions in nvme_free_sgls
Revert "rnbd-clt: fix refcount underflow in device unmap path"
nvmet: fix race in nvmet_bio_done() leading to NULL pointer dereference
- important fix for ARM 32-bit based systems using cma= kernel parameter
(Oreoluwa Babatunde)
- a fix for the corner case of the DMA atomic pool based allocations
(Sai Sree Kartheek Adivi)
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSrngzkoBtlA8uaaJ+Jp1EFxbsSRAUCaXyw5wAKCRCJp1EFxbsS
RBN7AP9rEfEEB3JBOglcZG3TTrLoCKLnw+16uroyKuD95RLWrQD/bWeJnRYcEZB5
ox1peKYBA4SsDB3bCUWFDfW4I0OZFQQ=
=9Nx1
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.19-2026-01-30' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping fixes from Marek Szyprowski:
- important fix for ARM 32-bit based systems using cma= kernel
parameter (Oreoluwa Babatunde)
- a fix for the corner case of the DMA atomic pool based allocations
(Sai Sree Kartheek Adivi)
* tag 'dma-mapping-6.19-2026-01-30' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma/pool: distinguish between missing and exhausted atomic pools
of: reserved_mem: Allow reserved_mem framework detect "cma=" kernel param
There is no point in iterating through individual tick dependency bits when
the tick_stop tracepoint is disabled, which is the common case.
When the trace point is disabled, return immediately based on the atomic
value being zero or non-zero, skipping the per-bit evaluation.
This optimization improves the hot path performance of tick dependency
checks across all contexts (idle and non-idle), not just nohz_full CPUs.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ionut Nechita (Sunlight Linux) <sunlightlinux@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260128074558.15433-3-sunlightlinux@gmail.com
The function name is missing an underscore, which results in:
Warning: ../drivers/gpu/drm/xe/xe_gt_sriov_pf_control.c:1261
This comment starts with '/**', but isn't a kernel-doc comment.
Refer to Documentation/doc-guide/kernel-doc.rst
* xe_gt_sriov_pf_control_trigger restore_vf() - Start ...
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Shuicheng Lin <shuicheng.lin@intel.com>
Link: https://patch.msgid.link/20251217150702.2669-1-michal.wajdeczko@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Recent x86 kernels export __preempt_count as a ksym, while some old kernels
between v6.1 and v6.14 expose the preemption counter via
pcpu_hot.preempt_count. The existing selftest helper unconditionally
dereferenced __preempt_count, which breaks BPF program loading on such old
kernels.
Make the x86 preemption count lookup version-agnostic by:
- Marking __preempt_count and pcpu_hot as weak ksyms.
- Introducing a BTF-described pcpu_hot___local layout with
preserve_access_index.
- Selecting the appropriate access path at runtime using ksym availability
and bpf_ksym_exists() and bpf_core_field_exists().
This allows a single BPF binary to run correctly across kernel versions
(e.g., v6.18 vs. v6.13) without relying on compile-time version checks.
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Link: https://lore.kernel.org/r/20260130021843.154885-1-changwoo@igalia.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Jiri Olsa says:
====================
this patchset allows sleepable programs to use tail calls.
At the moment we need to have separate sleepable uprobe program
to retrieve user space data and pass it to complex program with
tail calls. It'd be great if the program with tail calls could
be sleepable and do the data retrieval directly.
====================
Link: https://patch.msgid.link/20260130081208.1130204-1-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding test that makes sure we can't mix sleepable and non-sleepable
bpf programs in the BPF_MAP_TYPE_PROG_ARRAY map and that we can do
tail call in the sleepable program.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20260130081208.1130204-3-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allowing sleepable programs to use tail calls.
Making sure we can't mix sleepable and non-sleepable bpf programs
in tail call map (BPF_MAP_TYPE_PROG_ARRAY) and allowing it to be
used in sleepable programs.
Sleepable programs can be preempted and sleep which might bring
new source of race conditions, but both direct and indirect tail
calls should not be affected.
Direct tail calls work by patching direct jump to callee into bpf
caller program, so no problem there. We atomically switch from nop
to jump instruction.
Indirect tail call reads the callee from the map and then jumps to
it. The callee bpf program can't disappear (be released) from the
caller, because it is executed under rcu lock (rcu_read_lock_trace).
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260130081208.1130204-2-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Convert the Android Goldfish Battery binding to DT schema format.
Move the file to the power/supply directory to match the subsystem.
Update the example node name to 'battery' to comply with generic node
naming standards.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260113092602.3197681-5-visitorckw@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
On the Dell Latitude 7455, the firmware uses "LiP" with a lowercase 'i'
for the battery chemistry type, but only all-uppercase "LIP" was being
recognized. Add the CamelCase variant to the check to fix the "Unknown
battery technology" warning.
Fixes: 202ac22b8e ("power: supply: qcom_battmgr: Add lithium-polymer entry")
Signed-off-by: Val Packett <val@packett.cool>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260120235831.479038-1-val@packett.cool
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
- don't call into pinctrl when setting direction in gpio-rockchip as it's
not needed and may trigger locking context errors
- change spinlock to raw_spinlock in gpio-sprd
- fix a use-after-free bug in gpio-virtuser
- don't register a driver from another driver's probe() in gpio-omap
- fix int width problems in GPIO ACPI code
- fix interrupt-to-pin mapping in gpio-brcmstb
- mask interrupts in irq shutdown in gpio-pca953x
-----BEGIN PGP SIGNATURE-----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=KCJE
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"Over the last week I received quite an unexpected (for rc7) number of
fixes but they are all pretty small and mostly limited to drivers:
- don't call into pinctrl when setting direction in gpio-rockchip as
it's not needed and may trigger locking context errors
- change spinlock to raw_spinlock in gpio-sprd
- fix a use-after-free bug in gpio-virtuser
- don't register a driver from another driver's probe() in gpio-omap
- fix int width problems in GPIO ACPI code
- fix interrupt-to-pin mapping in gpio-brcmstb
- mask interrupts in irq shutdown in gpio-pca953x"
* tag 'gpio-fixes-for-v6.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: acpi: Fix potential out-of-boundary left shift
gpio: brcmstb: correct hwirq to bank map
gpio: omap: do not register driver in probe()
gpio: pca953x: mask interrupts in irq shutdown
gpio: virtuser: fix UAF in configfs release path
gpiolib: acpi: use BIT_ULL() for u64 mask in address space handler
gpio: sprd: Change sprd_gpio lock to raw_spin_lock
gpio: rockchip: Stop calling pinctrl for set_direction
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `extcon` handle, means that the
`extcon` handle will be deallocated/unregistered _before_ the interrupt
handler (since `devm_` naturally deallocates in reverse allocation
order). This means that during removal, there is a race condition where
an interrupt can fire just _after_ the `extcon` handle has been
freed, *but* just _before_ the corresponding unregistration of the IRQ
handler has run.
This will lead to the IRQ handler calling `extcon_set_state_sync()` with
a freed `extcon` handle. Which usually crashes the system or otherwise
silently corrupts the memory...
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `extcon` handle.
Fixes: f8d7a3d211 ("power: supply: Add driver for pm8916 lbc")
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Reviewed-by: Nikita Travkin <nikita@trvn.ru>
Link: https://patch.msgid.link/e2a4cd2fcd42b6cd97d856c17c097289a2aed393.1769163273.git.waqar.hameed@axis.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The amdxdna_ubuf_map() function allocates memory for sg and
internal sg table structures, but it fails to free them if subsequent
operations (sg_alloc_table_from_pages or dma_map_sgtable) fail.
Fixes: bd72d4acda ("accel/amdxdna: Support user space allocated buffer")
Signed-off-by: Zishun Yi <zishun.yi.dev@gmail.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Min Ma <mamin506@gmail.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260129171022.68578-1-zishun.yi.dev@gmail.com
Running jobs on a hardware context while it is in the process of
releasing resources can lead to use-after-free and crashes.
Fix this by stopping job scheduling before calling
aie2_release_resource() and restarting it after the release completes.
Additionally, aie2_sched_job_run() now checks whether the hardware
context is still active.
Fixes: 4fd6ca90fc ("accel/amdxdna: Refactor hardware context destroy routine")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260130003255.2083255-1-lizhi.hou@amd.com
Some tests trigger a crash in iommu_sva_unbind_device() due to
accessing iommu_mm after the associated mm structure has been
freed.
Fix this by taking an explicit reference to the mm structure
after successfully binding the device, and releasing it only
after the device is unbound. This ensures the mm remains valid
for the entire SVA bind/unbind lifetime.
Fixes: be462c97b7 ("accel/amdxdna: Add hardware context")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260128002356.1858122-1-lizhi.hou@amd.com
During testing, restart occasionally failed on Toradex modules.
The issue was traced to an interaction between the EC-based reset/poweroff
handler and the PSCI restart handler. While the embedded controller is
resetting or powering off the module, the PSCI code may still be invoked,
triggering an I2C transaction to the PMIC. This can leave the PMIC I2C
in a frozen state.
Add a delay after issuing the EC reset or power-off command to give the
controller time to complete the operation and avoid falling back to another
restart/poweroff provider.
Also print an error message if sending the command to the embedded controller
fails.
Fixes: 18672fe123 ("power: reset: add Toradex Embedded Controller")
Cc: stable@vger.kernel.org
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20260130071208.1184239-1-ghidoliemanuele@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
A semicolon was mistakenly placed at the end of 'if' statements.
If example is copied as-is, it would lead to the subsequent return
being executed unconditionally, which is incorrect, and the rest of the
function would never be reached.
Signed-off-by: Patrick Little <plittle@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
[ rjw: Subject adjustment ]
Link: https://patch.msgid.link/20260128-documentation-fix-grammar-v1-2-39238dc471f9@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix typos in documentation related to energy model management.
Signed-off-by: Patrick Little <plittle@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
[ rjw: Subject and changelog edits ]
Link: https://patch.msgid.link/20260128-documentation-fix-grammar-v1-1-39238dc471f9@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There are cases in which decisions made by the teo governor are
arguably overly conservative.
For instance, suppose that there are 4 idle states and the values of
the intercepts metric for the first 3 of them are 400, 250, and 251,
respectively. If the total sum computed in teo_update() is 1000, the
governor will select idle state 1 (provided that all idle states are
enabled and the scheduler tick has not been stopped) although arguably
idle state 0 would be a better choice because the likelihood of getting
an idle duration below the target residency of idle state 1 is greater
than the likelihood of getting an idle duration between the target
residency of idle state 1 and the target residency of idle state 2.
To address this, refine the candidate idle state lookup based on
intercepts to start at the state with the maximum intercepts metric,
below the deepest enabled one, to avoid the cases in which the search
may stop before reaching that state.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
[ rjw: Fixed typo "intercetps" in new comments (3 places) ]
Link: https://patch.msgid.link/2417298.ElGaqSPkdT@rafael.j.wysocki
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If differences between target residency values of adjacent idle states
of a given CPU are relatively large, the corresponding idle state bins
used by the teo governors are large either and the rule by which hits
are distinguished from intercepts is inaccurate.
Namely, by that rule, a wakeup event is classified as a hit if the
sleep length (the time till the closest timer other than the tick)
and the measured idle duration, adjusted for the entered idle state
exit latency, fall into the same idle state bin. However, if that bin
is large enough, the actual difference between the sleep length and
the measured idle duration may be significant. It may in fact be
significantly greater than the analogous difference for an event where
the sleep length and the measured idle duration fall into different
bins.
For this reason, amend the rule in question with a check that will only
allow a wakeup event to be counted as a hit if the sleep length is less
than the "raw" measured idle duration (which means that the wakeup
appears to have occurred after the anticipated timer event). Otherwise,
the event will be counted as an intercept.
Also update the documentation part explaining the difference between
"hits" and "intercepts" to take the above change into account.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/5093379.31r3eYUQgx@rafael.j.wysocki
Previously program_hpx_type2() applied PCIe settings unconditionally,
which could incorrectly change bits like Extended Tag Field Enable and
Enable Relaxed Ordering.
When _HPX was added to ACPI r3.0, the intent of the PCIe Setting
Record (Type 2) in sec 6.2.7.3 was to configure AER registers when the
OS does not own the AER Capability:
The PCI Express setting record contains ... [the AER] Uncorrectable
Error Mask, Uncorrectable Error Severity, Correctable Error Mask
... to be used when configuring registers in the Advanced Error
Reporting Extended Capability Structure ...
OSPM [1] will only evaluate _HPX with Setting Record – Type 2 if
OSPM is not controlling the PCI Express Advanced Error Reporting
capability.
ACPI r3.0b, sec 6.2.7.3, added more AER registers, including registers
in the PCIe Capability with AER-related bits, and the restriction that
the OS use this only when it owns PCIe native hotplug:
... when configuring PCI Express registers in the Advanced Error
Reporting Extended Capability Structure *or PCI Express Capability
Structure* ...
An OS that has assumed ownership of native hot plug but does not
... have ownership of the AER register set must use ... the Type 2
record to program the AER registers ...
However, since the Type 2 record also includes register bits that
have functions other than AER, the OS must ignore values ... that
are not applicable.
Restrict program_hpx_type2() to only the intended purpose:
- Apply settings only when OS owns PCIe native hotplug but not AER,
- Only touch the AER-related bits (Error Reporting Enables) in Device
Control
- Don't touch Link Control at all, since nothing there seems AER-related,
but log _HPX settings for debugging purposes
Note that Read Completion Boundary is now configured elsewhere, since it is
unrelated to _HPX.
[1] Operating System-directed configuration and Power Management
Fixes: 40abb96c51 ("[PATCH] pciehp: Fix programming hotplug parameters")
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260129175237.727059-3-haakon.bugge@oracle.com
