rt722 is aggregated with rt1320 amp in arl_rt722_l0_rt1320_l2 and it is
the only audio configuration in the ARL platform. Set .aggregated = 1 to
represent the fact and avoid unexpected issue.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20260119091749.1752088-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new compatible string 'fsl,imx952-sai' for i.MX952 platform, which
is fallback compatible with 'fsl,imx95-sai'.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260115061418.4131432-1-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASP_TX5 was incorrectly mapped to a channel value of 3 corrects,
the channel value of 4.
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Link: https://patch.msgid.link/20260115192523.1335742-2-rriveram@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dm-bufio's map from block number to buffer is organized as a hash table
of red-black trees. It does far more lookups in this hash table than
necessary: typically one lookup to lock the tree, one lookup to search
the tree, and one lookup to unlock the tree. Only one of those lookups
is needed. Optimize it to do only the minimum number of lookups.
This improves performance. It also reduces the object code size,
considering that the redundant hash table lookups were being inlined.
For example, the size of the text section of dm-bufio.o decreases from
15599 to 15070 bytes with gcc 15 and x86_64, or from 20652 to 20244
bytes with clang 21 and arm64.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Merge cache_put() into its only caller, cache_put_and_wake().
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Forgot to do that during the Secure AVIC review. :-\
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://patch.msgid.link/20260119141310.29605-1-bp@kernel.org
Add selftests that verify the keyring behaves correctly.
For simplicity this works with dm-verity as a module.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Add a dedicated ".dm-verity" keyring for root hash signature
verification, similar to the ".fs-verity" keyring used by fs-verity.
By default the keyring is unused retaining the exact same old behavior.
For systems that provision additional keys only intended for dm-verity
images during boot, the dm_verity.keyring_unsealed=1 kernel parameter
leaves the keyring open.
We want to use this in systemd as a way add keys during boot that are
only used for creating dm-verity devices for later mounting and nothing
else. The discoverable disk image (DDI) spec at [1] heavily relies on
dm-verity and we would like to expand this even more. This will allow us
to do that in a fully backward compatible way.
Once provisioning is complete, userspace restricts and activates it for
dm-verity verification. If userspace fully seals the keyring then it
gains the guarantee that no new keys can be added.
Link: https://uapi-group.org/specifications/specs/discoverable_partitions_specification [1]
Co-developed-by: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Switch the read_callback_file() documentation example from
core::sync::atomic::AtomicU32 to the kernel's Atomic because Rust
native atomics are not allowed to use in kernel.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://patch.msgid.link/20251203000411.30434-1-fujita.tomonori@gmail.com
[ Use kernel vertical import style. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
If a read/write request goes through io_req_rw_cleanup() and has an
allocated iovec attached and fails to put to the rw_cache, then it may
end up with an unaccounted iovec pointer. Have io_rw_recycle() return
whether it recycled the request or not, and use that to gauge whether to
free a potential iovec or not.
Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit bdb8d06dfe ("dmabuf: Add the capability to expose DMA-BUF stats
in sysfs") added dmabuf statistics to sysfs in 2021 under
CONFIG_DMABUF_SYSFS_STATS. After being used in production, performance
problems were discovered leading to its deprecation in 2022 in commit
e0a9f1fe20 ("dma-buf: deprecate DMABUF_SYSFS_STATS"). Some of the
problems with this interface were discussed in my LPC 2025 talk. [1][2]
Android was probably the last user of the interface, which has since
been migrated to use the dmabuf BPF iterator [3] to obtain the same
information more cheaply. As promised in that series, now that the
longterm stable 6.18 kernel has been released let's remove the sysfs
dmabuf statistics from the kernel.
[1] https://www.youtube.com/watch?v=D83qygudq9c
[2] https://lpc.events/event/19/contributions/2118/
[3] https://lore.kernel.org/all/20250522230429.941193-1-tjmercier@google.com/
Signed-off-by: T.J. Mercier <tjmercier@google.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patch.msgid.link/20260116190517.3268458-1-tjmercier@google.com
The system dma-buf heap lets userspace allocate buffers from the page
allocator. However, these allocations are not accounted for in memcg,
allowing processes to escape limits that may be configured.
Pass __GFP_ACCOUNT for system heap allocations, based on the
dma_heap.mem_accounting parameter, to use memcg and account for them.
Signed-off-by: Eric Chanudet <echanude@redhat.com>
Reviewed-by: T.J. Mercier <tjmercier@google.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patch.msgid.link/20260116-dmabuf-heap-system-memcg-v3-2-ecc6b62cc446@redhat.com
Add a parameter to enable dma-buf heaps allocation accounting using
cgroup for heaps that implement it. It is disabled by default as doing
so incurs caveats based on how memcg currently accounts for shared
buffers.
Signed-off-by: Eric Chanudet <echanude@redhat.com>
Reviewed-by: T.J. Mercier <tjmercier@google.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patch.msgid.link/20260116-dmabuf-heap-system-memcg-v3-1-ecc6b62cc446@redhat.com
Commit
693c819fed ("x86/entry/vdso: Refactor the vdso build")
moves the vdso sources into common, vdso32, and vdso64 subdirectories, but
misses to adjust the file entry in the INTEL SGX section of the MAINTAINERS
file.
Adjust the file entry in accordance with the file movement of the commit
above.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20260119093835.114554-1-lukas.bulwahn@redhat.com
In the audio mixer handling code of ctxfi driver, the conf field is
used as a kind of loop index, and it's referred in the index callbacks
(amixer_index() and sum_index()).
As spotted recently by fuzzers, the current code causes OOB access at
those functions.
| UBSAN: array-index-out-of-bounds in /build/reproducible-path/linux-6.17.8/sound/pci/ctxfi/ctamixer.c:347:48
| index 8 is out of range for type 'unsigned char [8]'
After the analysis, the cause was found to be the lack of the proper
(re-)initialization of conj field.
This patch addresses those OOB accesses by adding the proper
initializations of the loop indices.
Reported-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Karsten Hohmeier <linux@hohmatik.de>
Closes: https://bugs.debian.org/1121535
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/all/aSk8KJI35H7gFru6@eldamar.lan/
Link: https://patch.msgid.link/20260119133212.189129-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since GCE has been moved to MMINFRA in MT8196, all transactions from
MMINFRA to DRAM will have their addresses adjusted by subtracting a
mminfra_offset.
Therefore, the CMDQ helper driver needs to get the mminfra_offset value
of the SoC from cmdq_mbox_priv of cmdq_pkt and then add it to the DRAM
address when generating instructions to ensure GCE accesses the correct
DRAM address. CMDQ users can then call CMDQ helper APIs as usual.
Signed-off-by: Jason-JH Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
This patch extends the cmdq_pkt_write API to support SoCs that do not
have subsys ID mapping by introducing new register write APIs:
- cmdq_pkt_write_pa() and cmdq_pkt_write_subsys() replace
cmdq_pkt_write()
- cmdq_pkt_write_mask_pa() and cmdq_pkt_write_mask_subsys() replace
cmdq_pkt_write_mask()
To ensure consistent function pointer interfaces, both
cmdq_pkt_write_pa() and cmdq_pkt_write_subsys() provide subsys and
pa_base parameters. This unifies how register writes are invoked,
regardless of whether subsys ID is supported by the device.
All GCEs support writing registers by PA (with mask) without subsys,
but this requires extra GCE instructions to convert the PA into a GCE
readable format, reducing performance compared to using subsys directly.
Therefore, subsys is preferred for register writes when available.
API documentation and function pointer declarations in cmdq_client_reg
have been updated. The original write APIs will be removed after all
CMDQ users transition to the new interfaces.
Signed-off-by: Jason-JH Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
When GCE executes instructions, it typically locates the corresponding
hardware register using the subsys ID. For hardware that does not
support subsys ID, the subsys ID is set to an invalid value, and the
physical address must be used to generate GCE instructions.
The main advantage of using subsys ID is to reduce the number of
instructions. Without subsys ID, an additional `ASSIGN` instruction
is needed to assign the high bytes of the physical address, which can
impact performance if too many instructions are required. However, if
the hardware does not support subsys ID, using the physical address
is the only option to achieve the same functionality.
This commit adds a pa_base parsing flow to the cmdq_client_reg structure
to handle hardware without subsys ID support.
Signed-off-by: Jason-JH Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add cmdq_get_mbox_priv() in cmdq_pkt_create() to ensure getting private
data before generating GCE instructions.
Signed-off-by: Jason-JH Lin <jason-jh.lin@mediatek.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
MT8196 has 2 new hardware configuration compared with the previous SoC,
which correspond to the 2 new driver data:
1. mminfra_offset: For GCE data path control
Since GCE has been moved into mminfra, GCE needs to append the
mminfra offset to the DRAM address when accessing the DRAM.
2. gce_vm: For GCE hardware virtualization control
Currently, the first version of the mt8196 mailbox controller only
requires setting the VM-related registers to enable the permissions
of a host VM.
Signed-off-by: Jason-JH Lin <jason-jh.lin@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The GCE in MT8196 is placed in MMINFRA and requires all addresses
in GCE instructions for DRAM transactions to be IOVA.
Due to MMIO, if the GCE needs to access a hardware register at
0x1000_0000, but the SMMU is also mapping a DRAM block at 0x1000_0000,
the MMINFRA will not know whether to write to the hardware register or
the DRAM.
To solve this, MMINFRA treats addresses greater than 2G as data paths
and those less than 2G as config paths because the DRAM start address
is currently at 2G (0x8000_0000). On the data path, MMINFRA remaps
DRAM addresses by subtracting 2G, allowing SMMU to map DRAM addresses
less than 2G.
For example, if the DRAM start address 0x8000_0000 is mapped to
IOVA=0x0, when GCE accesses IOVA=0x0, it must add a 2G offset to
the address in the GCE instruction. MMINFRA will then see it as a
data path (IOVA >= 2G) and subtract 2G, allowing GCE to access IOVA=0x0.
Since the MMINFRA remap subtracting 2G is done in hardware and cannot
be configured by software, the address of DRAM in GCE instruction must
always add 2G to ensure proper access. After that, the shift functions
do more than just shift addresses, so the APIs were renamed to
cmdq_convert_gce_addr() and cmdq_revert_gce_addr().
This 2G adjustment is referred to as mminfra_offset in the CMDQ driver.
CMDQ helper can get the mminfra_offset from the cmdq_mbox_priv of
cmdq_pkt and add the mminfra_offset to the DRAM address in GCE
instructions.
Signed-off-by: Jason-JH Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The GCE hardware virtualization configuration supports the isolation of
GCE hardware resources across different OS environments. Each OS is
treated as a virtual machine (VM) for GCE purposes.
There are 6 VMs and 1 host VM. The host VM has main control over the
GCE virtualization settings for all VMs.
To properly access the GCE thread registers, it is necessary to
configure access permissions for specific GCE threads assigned to
different VMs.
Currently, since only the host VM is being used, it is required to
enable access permissions for all GCE threads for the host VM.
There are 2 VM configurations:
1. VM_ID_MAP
There are 4 registers to allocate 32 GCE threads across different VMs:
VM_ID_MAP0 for threads 0-9, VM_ID_MAP1 for threads 10-19,
VM_ID_MAP2 for threads 20-29, and VM_ID_MAP3 for threads 30-31.
Each thread has a 3-bit configuration, where setting all bits to 1
configures the thread for the host VM.
2. VM_CPR_GSIZE
It is used to allocate the CPR SRAM size to each VM. Each VM has 4-bit
configuration, where setting bit 0-3 to configures the size of host VM.
This setting must be configured before the VM configuration to prevent
resource leakage.
Signed-off-by: Jason-JH Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add the cmdq_mbox_priv structure to store the private data of GCE,
such as the shift bits of the physical address. Then, include the
cmdq_mbox_priv structure within the cmdq_pkt structure.
This allows CMDQ users to utilize the private data in cmdq_pkt to
generate GCE instructions when needed. Additionally, having
cmdq_mbox_priv makes it easier to expand and reference other GCE
private data in the future.
Add cmdq_get_mbox_priv() for CMDQ users to get all the private data
into the cmdq_mbox_priv of the cmdq_pkt.
Signed-off-by: Jason-JH Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Device tree nodes should have generic names, and this one doesn't.
Rename the mt8192-afe-pcm subnode of audsys to `audio-controller`.
This commit brings no functional changes, but resolves dtbs_check
warnings.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Add support for the mediatek,mt8192-audsys compatible, which uses
a different audio controller (mt8192-afe-pcm) compared to mt8183
and mt2701.
This resolves a dtbs_check warning on all MT8192 devicetrees.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
The "gpuid" module parameter is used to override the gpuid read from a
hardware register and is useful for testing the loading of different
firmware (including processing of the firmware header) without having
the hardware to hand.
Signed-off-by: Alexandru Dadu <alexandru.dadu@imgtec.com>
Reviewed-by: Alessio Belle <alessio.belle@imgtec.com>
Link: https://patch.msgid.link/20260113-device-support-info-v1-4-91e5db7f7294@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
We have a module parameter to set the initial group mask before debugfs is
available for any specific device, but don't currently use that value when
initialising devices.
Use the module parameter value as the initial value for group_mask.
Reviewed-by: Alessio Belle <alessio.belle@imgtec.com>
Link: https://patch.msgid.link/20260113-device-support-info-v1-3-91e5db7f7294@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
This value can come from two places: a module parameter or a debugfs file.
In both cases, validate it early to provide feedback to userspace at the
time the value is set instead of deferring until the value is used.
Reviewed-by: Alessio Belle <alessio.belle@imgtec.com>
Link: https://patch.msgid.link/20260113-device-support-info-v1-2-91e5db7f7294@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
We had a whole load of bloaty infrastructure to deal with module parameters
in a way that's wholly unnecessary. Strip it all back to basics to make
adding new parameters less of a headache.
Reviewed-by: Alessio Belle <alessio.belle@imgtec.com>
Link: https://patch.msgid.link/20260113-device-support-info-v1-1-91e5db7f7294@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
This is a special device that's created dynamically and is supposed to
stay in memory forever. We also currently don't have a devlink between
it and the actual reset consumer. Suppress sysfs bind attributes so that
user-space can't unbind the device because - as of now - it will cause a
use-after-free splat from any user that puts the reset control handle.
Fixes: cee544a40e ("reset: gpio: Add GPIO-based reset controller")
Cc: stable@vger.kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The fs/minix implementation of the minix filesystem does not currently
support any other value for s_log_zone_size than 0. This is also the
only value supported in util-linux; see mkfs.minix.c line 511. In
addition, this patch adds some sanity checking for the other minix
superblock fields, and moves the minix_blocks_needed() checks for the
zmap and imap also to minix_check_super_block().
This also closes a related syzbot bug report.
Signed-off-by: Jori Koolstra <jkoolstra@xs4all.nl>
Link: https://patch.msgid.link/20251208153947.108343-1-jkoolstra@xs4all.nl
Reviewed-by: Jan Kara <jack@suse.cz>
Reported-by: syzbot+5ad0824204c7bf9b67f2@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=5ad0824204c7bf9b67f2
Signed-off-by: Christian Brauner <brauner@kernel.org>
Possibility of no FW trace available after update in the fw_trace_mask due
to asynchronous mode of command consumption in the FW.
To ensure FW trace is available after update, wait for FW trace log update
command completion from the FW.
Fixes: cc1aeedb98 ("drm/imagination: Implement firmware infrastructure and META FW support")
Signed-off-by: Brajesh Gupta <brajesh.gupta@imgtec.com>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Link: https://patch.msgid.link/20260108040936.129769-1-brajesh.gupta@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
The rest of the DRM framework uses presence of the callbacks to check if
the particular infoframe is supported. Register HDMI callbacks
dynamically, basing on the corresponding drm_bridge ops.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260107-limit-infoframes-2-v4-9-213d0d3bd490@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
There is little point in generating InfoFrames which are not supported
by the driver. Skip generating the unsupported InfoFrames, making sure
that the kernel never tries to write the unsupported frame. As there are
no remaining usecases, change write_infoframe / clear_infoframe helpers
return an error if the corresponding callback is NULL.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260107-limit-infoframes-2-v4-8-213d0d3bd490@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Updating the InfoFrame if it can not be sent over the wire makes no
sense. Change drm_atomic_helper_connector_hdmi_update_audio_infoframe()
and drm_atomic_helper_connector_hdmi_clear_audio_infoframe() to return
an error if Audio InfoFrame callbacks are not implemented.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260107-limit-infoframes-2-v4-7-213d0d3bd490@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Havign a single set of InfoFrame callbacks doesn't provide enough
information to the DRM framework about the InfoFrame types that are
actually supported. Also it's not really future-proof: it provides a way
to program only a single Vendor-Specific frame, however we might need to
support multiple VSIs at the same time (e.g. HDMI vs HDMI Forum
VSIs).
Provide separate sets of callbacks, one per the InfoFrame type.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260107-limit-infoframes-2-v4-6-213d0d3bd490@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Having only a single set of callbacks, hdmi_clear_infoframe and
hdmi_write_infoframe, bridge drivers don't have an easy way to signal to
the DRM framework, which InfoFrames are actually supported by the
hardware and by the driver and which are not. Also, it makes it
extremely easy for HDMI bridge drivers to skip implementing the
seemingly required InfoFrames (e.g. HDMI VSI). Last, but not least,
those callbacks take a single 'type' parameter, which makes it
impossible to implement support for multiple VSIs (which will be
required once we start working on HDMI Forum VSI).
Split the callbacks into a per-InfoFrame-kind pairs, letting the bridge
drivers actually signal supported features. The implementation follows
the overall drm_bridge design, where the bridge has a single
drm_bridge_funcs implementation and signals, which functions are to be
called using the drm_bridge->ops flags.
The AVI and HDMI VSI are assumed to be required for a normal HDMI
operation (with the drivers getting a drm_warn_once() stub
implementation if one is missing). The Audio InfoFrame is handled by the
existing DRM_BRIDGE_OP_HDMI_AUDIO, while the SPD and HDR DRM InfoFrames
got new drm_bridge_ops values.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260107-limit-infoframes-2-v4-5-213d0d3bd490@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
We already require both hdmi_write_infoframe and hdmi_clear_infoframe
for bridges implementing DRM_BRIDGE_OP_HDMI. It makes sense to require
the clear_infoframes callback for HDMI connectors utilizing
drmm_connector_hdmi_init().
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260107-limit-infoframes-2-v4-4-213d0d3bd490@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Verify the InfoFrames behaviour. Check that reporting InfoFrame as
unsupported doesn't result in a commit error. Also check that HDR and
Audio InfoFrames are not triggered if corresponding features are not
enabled.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260107-limit-infoframes-2-v4-1-213d0d3bd490@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Drop the driver-specific field_get() and field_prep() macros, in favor
of the globally available variants from <linux/bitfield.h>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmltb/UeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGb3QH/1SeMiCPW/jZTLdr
J5ljJ5eldQXcE3lCDGRKF2s4BNuYrWTQnBh1pjcS1OSH6d5KLjmULf5/BznGHbWY
ZFjH1LL4A6HAWpg6BIPU9pPq6mZzAlu7ESxjXIFOavhuOA22OqF9GfoFxh1qF2er
ew8G4UqalGyD311jqfGjWAIHtMss5//JSc9RZ04SjeuI+8oUlBFKFiZgnQyaAKzv
ntBvQDdavzW1jG7KuWlCvN+0feApXoRP94va3PsZ9UdBqIxY39KTLtyluDE/Cu66
5D4lNaagmZUYPw3YSAsS+J/7Rr28ARp6J5ebzoupc7HfilofBkxWBea8/LaSrGTH
nBiGQac=
=IOwO
-----END PGP SIGNATURE-----
Merge tag 'v6.19-rc6' into tip-x86-cleanups
Pick up upstream work and
d9b40d7262 ("selftests/x86: Add selftests include path for kselftest.h after centralization")
especially which is a build fix needed for a selftests cleanup coming
ontop of this.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
This patch adds runtime power management support for platform-based
CoreSight Interconnect TNOC (ITNOC) devices. It introduces suspend and
resume callbacks to manage the APB clock (`pclk`) during device runtime
transitions.
Signed-off-by: Yuanfang Zhang <yuanfang.zhang@oss.qualcomm.com>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20251203-itnoc-v5-3-5b97c63f2268@oss.qualcomm.com
