Always allocate struct filename from names_cachep, long name or short;
short names would be embedded into struct filename. Longer ones do
not cannibalize the original struct filename - put them into kmalloc'ed
buffers (PATH_MAX-sized for import from userland, strlen() + 1 - for
ones originating kernel-side, where we know the length beforehand).
Cutoff length for short names is chosen so that struct filename would be
192 bytes long - that's both a multiple of 64 and large enough to cover
the majority of real-world uses.
Simplifies logics in getname()/putname() and friends.
[fixed an embarrassing braino in EMBEDDED_NAME_MAX, first reported by
Dan Carpenter]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Instances of struct filename come from names_cachep (via
__getname()). That is done by getname_flags() and getname_kernel()
and these two are the main callers of __getname(). However, there are
other callers that simply want to allocate PATH_MAX bytes for uses that
have nothing to do with struct filename.
We want saner allocation rules for long pathnames, so that struct
filename would *always* come from names_cachep, with the out-of-line
pathname getting kmalloc'ed. For that we need to be able to change the
size of objects allocated by getname_flags()/getname_kernel().
That requires the rest of __getname() users to stop using
names_cachep; we could explicitly switch all of those to kmalloc(),
but that would cause quite a bit of noise. So the plan is to switch
getname_...() to new helpers and turn __getname() into a wrapper for
kmalloc(). Remaining __getname() users could be converted to explicit
kmalloc() at leisure, hopefully along with figuring out what size do
they really want - PATH_MAX is an overkill for some of them, used out
of laziness ("we have a convenient helper that does 4K allocations and
that's large enough, let's use it").
As a side benefit, names_cachep is no longer used outside
of fs/namei.c, so we can move it there and be done with that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Take the "long name" case into a helper (getname_long()). In
case of failure have the caller deal with freeing the original
struct filename.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
In case of long name don't reread what we'd already copied.
memmove() it instead. That avoids the possibility of ending
up with empty name there and the need to look at the flags
on the slow path.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
... so don't use __getname() there. Switch it (and ntfs_d_hash(), while
we are at it) to kmalloc(PATH_MAX, GFP_NOWAIT). Yes, ntfs_d_hash()
almost certainly can do with smaller allocations, but let ntfs folks
deal with that - keep the allocation size as-is for now.
Stop abusing names_cachep in ntfs, period - various uses of that thing
in there have nothing to do with pathnames; just use k[mz]alloc() and
be done with that. For now let's keep sizes as-in, but AFAICS none of
the users actually want PATH_MAX.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Originally we tried to avoid multiple insertions into audit names array
during retry loop by a cute hack - memorize the userland pointer and
if there already is a match, just grab an extra reference to it.
Cute as it had been, it had problems - two identical pointers had
audit aux entries merged, two identical strings did not. Having
different behaviour for syscalls that differ only by addresses of
otherwise identical string arguments is obviously wrong - if nothing
else, compiler can decide to merge identical string literals.
Besides, this hack does nothing for non-audited processes - they get
a fresh copy for retry. It's not time-critical, but having behaviour
subtly differ that way is bogus.
These days we have very few places that import filename more than once
(9 functions total) and it's easy to massage them so we get rid of all
re-imports. With that done, we don't need audit_reusename() anymore.
There's no need to memorize userland pointer either.
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Take getname_flags() and putname() outside of retry loop.
Since getname_flags() is the only thing that cares about LOOKUP_EMPTY,
don't bother with setting LOOKUP_EMPTY in lookup_flags - just pass it
to getname_flags() and be done with that.
The things could be further simplified by use of cleanup.h stuff, but
let's not clutter the patch with that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Convert the user_path_at() call inside a retry loop into getname_flags() +
filename_lookup() + putname() and leave only filename_lookup() inside
the loop.
In this case we never pass LOOKUP_EMPTY, so getname_flags() is equivalent
to plain getname().
The things could be further simplified by use of cleanup.h stuff, but
let's not clutter the patch with that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Convert the user_path_at() call inside a retry loop into getname_flags() +
filename_lookup() + putname() and leave only filename_lookup() inside
the loop.
In this case we never pass LOOKUP_EMPTY, so getname_flags() is equivalent
to plain getname().
The things could be further simplified by use of cleanup.h stuff, but
let's not clutter the patch with that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Convert the user_path_at() call inside a retry loop into getname_flags() +
filename_lookup() + putname() and leave only filename_lookup() inside
the loop.
In this case we never pass LOOKUP_EMPTY, so getname_flags() is equivalent
to plain getname().
The things could be further simplified by use of cleanup.h stuff, but
let's not clutter the patch with that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Convert the user_path_at() call inside a retry loop into getname_flags() +
filename_lookup() + putname() and leave only filename_lookup() inside
the loop.
In this case we never pass LOOKUP_EMPTY, so getname_flags() is equivalent
to plain getname().
The things could be further simplified by use of cleanup.h stuff, but
let's not clutter the patch with that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Convert the user_path_at() call inside a retry loop into getname_flags() +
filename_lookup() + putname() and leave only filename_lookup() inside
the loop.
Since we have the default logics for use of LOOKUP_EMPTY (passed iff
AT_EMPTY_PATH is present in flags), just use getname_uflags() and
don't bother with setting LOOKUP_EMPTY in lookup_flags - getname_uflags()
will pass the right thing to getname_flags() and filename_lookup()
doesn't care about LOOKUP_EMPTY at all.
The things could be further simplified by use of cleanup.h stuff, but
let's not clutter the patch with that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Convert the user_path_at() call inside a retry loop into getname_flags() +
filename_lookup() + putname() and leave only filename_lookup() inside
the loop.
Since we have the default logics for use of LOOKUP_EMPTY (passed iff
AT_EMPTY_PATH is present in flags), just use getname_uflags() and
don't bother with setting LOOKUP_EMPTY in lookup_flags - getname_uflags()
will pass the right thing to getname_flags() and filename_lookup()
doesn't care about LOOKUP_EMPTY at all.
The things could be further simplified by use of cleanup.h stuff, but
let's not clutter the patch with that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Convert the user_path_at() call inside a retry loop into getname_flags() +
filename_lookup() + putname() and leave only filename_lookup() inside
the loop.
Since we have the default logics for use of LOOKUP_EMPTY (passed iff
AT_EMPTY_PATH is present in flags), just use getname_uflags() and
don't bother with setting LOOKUP_EMPTY in lookup_flags - getname_uflags()
will pass the right thing to getname_flags() and filename_lookup()
doesn't care about LOOKUP_EMPTY at all.
The things could be further simplified by use of cleanup.h stuff, but
let's not clutter the patch with that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Convert the user_path_at() call inside a retry loop into getname_flags() +
filename_lookup() + putname() and leave only filename_lookup() inside
the loop.
Since we have the default logics for use of LOOKUP_EMPTY (passed iff
AT_EMPTY_PATH is present in flags), just use getname_uflags() and
don't bother with setting LOOKUP_EMPTY in lookup_flags - getname_uflags()
will pass the right thing to getname_flags() and filename_lookup()
doesn't care about LOOKUP_EMPTY at all.
The things could be further simplified by use of cleanup.h stuff, but
let's not clutter the patch with that.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Not all users match that model, but most of them do. By the end of
the series we'll be left with very few irregular ones...
Added:
CLASS(filename, name)(user_path) =>
getname(user_path)
CLASS(filename_kernel, name)(string) =>
getname_kernel(string)
CLASS(filename_flags, name)(user_path, flags) =>
getname_flags(user_path, flags)
CLASS(filename_uflags, name)(user_path, flags) =>
getname_uflags(user_path, flags)
CLASS(filename_maybe_null, name)(user_path, flags) =>
getname_maybe_null(user_path, flags)
all with putname() as destructor.
"flags" in filename_flags is in LOOKUP_... space, only LOOKUP_EMPTY matters.
"flags" in filename_uflags and filename_maybe_null is in AT_...... space,
and only AT_EMPTY_PATH matters.
filename_flags conventions might be worth reconsidering later (it might or
might not be better off with boolean instead)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The keep_feat() determines which header features will be kept or
discarded. Usually 'perf inject' will add build-IDs based on -b, -B or
other related options. But it lose build-ID when none of those options
are used. This is meaningful only when --buildid-mmap is not used.
The following example shows the impact of this change.
$ perf record --no-buildid-mmap true
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.037 MB perf.data (5 samples) ]
$ perf inject -i perf.data -o perf.data.inject
$ perf buildid-list -i perf.data
08cccc2a9388d5247ccb3e864f3063b975b0a15d /usr/lib/x86_64-linux-gnu/ld-linux-x86-64.so.2
fd5c4d5673256cd6bda51725dba048dabb0f854e [kernel.kallsyms]
97a36ce1140071be5c36b147fa0bed173e05a602 [vdso]
$ perf buildid-list -i perf.data.inject
97a36ce1140071be5c36b147fa0bed173e05a602 [vdso]
With this change, perf.data.inject would show the same list (of course,
you need to run perf inject again).
Reported-by: Gabriel Marin <gmx@google.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that the SHA-1 code is no longer used, remove it.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Tested-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Fangrui Song <maskray@sourceware.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Pablo Galindo <pablogsal@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Recent patches [1] [2] added an implementation of SHA-1 to perf and made
it be used for build ID generation.
I had understood the choice of SHA-1, which is a legacy algorithm, to be
for backwards compatibility.
It turns out, though, that there's no backwards compatibility
requirement here other than the size of the build ID field, which is
fixed at 20 bytes. Not only did the hash algorithm already change (from
MD5 to SHA-1), but the inputs to the hash changed too: from 'load_addr
|| code' to just 'code', and now again to 'code || symtab || strsym'
[3]. Different linkers generate different build IDs, with the LLVM
linker using BLAKE3 hashes for example [4].
Therefore, we might as well switch to a more modern algorithm. Let's go
with BLAKE2s. It's faster than SHA-1, isn't cryptographically broken,
is easier to implement than BLAKE3, and the kernel's implementation in
lib/crypto/blake2s.c is easily borrowed. It also natively supports
variable-length hashes, so it can directly produce the needed 20 bytes.
Also make the following additional improvements:
- Hash the three inputs incrementally, so they don't all have to be
concatenated into one buffer.
- Add tag/length prefixes to each of the three inputs, so that distinct
input tuples reliably result in distinct hashes.
[1] https://lore.kernel.org/linux-perf-users/20250521225307.743726-1-yuzhuo@google.com/
[2] https://lore.kernel.org/linux-perf-users/20250625202311.23244-1-ebiggers@kernel.org/
[3] https://lore.kernel.org/linux-perf-users/20251125080748.461014-1-namhyung@kernel.org/
[4] d3e5b6f753
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Tested-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Fangrui Song <maskray@sourceware.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Pablo Galindo <pablogsal@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add BLAKE2s support to the perf utility library. The code is borrowed
from the kernel. This will replace the use of SHA-1 in genelf.c.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Tested-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Fangrui Song <maskray@sourceware.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Pablo Galindo <pablogsal@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This test occasionally fails due to exceeding timing bounds, as
run in continuous testing on netdev.bots:
https://netdev.bots.linux.dev/contest.html?test=txtimestamp-sh
A common pattern is a single elevated delay between USR and SND.
# 8.36 [+0.00] test SND
# 8.36 [+0.00] USR: 1767864384 s 240994 us (seq=0, len=0)
# 8.44 [+0.08] ERROR: 18461 us expected between 10000 and 18000
# 8.44 [+0.00] SND: 1767864384 s 259455 us (seq=42, len=10) (USR +18460 us)
# 8.52 [+0.07] SND: 1767864384 s 339523 us (seq=42, len=10) (USR +10005 us)
# 8.52 [+0.00] USR: 1767864384 s 409580 us (seq=0, len=0)
# 8.60 [+0.08] SND: 1767864384 s 419586 us (seq=42, len=10) (USR +10005 us)
# 8.60 [+0.00] USR: 1767864384 s 489645 us (seq=0, len=0)
# 8.68 [+0.08] SND: 1767864384 s 499651 us (seq=42, len=10) (USR +10005 us)
# 8.68 [+0.00] USR-SND: count=4, avg=12119 us, min=10005 us, max=18460 us
(Note that other delays are nowhere near the large 8ms tolerance.)
One hypothesis is that the task is descheduled between taking the USR
timestamp and sending the packet. Possibly in printing.
Delay taking the timestamp closer to sendmsg, and delay printing until
after sendmsg.
With this change, failure rate is significantly lower in current runs.
Link: https://lore.kernel.org/netdev/20260107110521.1aab55e9@kernel.org/
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260112163355.3510150-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When there is no exclusion occurring from the cmds list - for example -
cmds contains ["read-vdso32"] and excludes contains ["archive"] - the
main loop completes with ci == cj == 0. In the original code the loop
processing the remaining elements in the list was conditional:
if (ci != cj) { ...}
So we end up in the assertion loop since ci < cmds->cnt and we
incorrectly try to assert the list elements to be NULL and fail with
the following error
help.c:104: exclude_cmds: Assertion `cmds->names[ci] == NULL' failed.
Fix this by moving the if (ci != cj) check inside of a broader loop.
If ci != cj, left shift the list elements, as before, and then
unconditionally advance the ci and cj indicies which also covers the
ci == cj case.
Fixes: 1fdf938168 ("perf tools: Fix use-after-free in help_unknown_cmd()")
Reviewed-by: Guilherme Amadio <amadio@gentoo.org>
Signed-off-by: Sri Jayaramappa <sjayaram@akamai.com>
Tested-by: Guilherme Amadio <amadio@gentoo.org>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Joshua Hunt <johunt@akamai.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20251202213632.2873731-1-sjayaram@akamai.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a test that seeks to see inline functions correctly displayed in
'perf script' from the inlineloop workload.
Committer testing:
# perf test 'addr2line inline unwinding'
76: test addr2line inline unwinding : Ok
# perf test -vv 'addr2line inline unwinding'
76: test addr2line inline unwinding:
--- start ---
test child forked, pid 1508628
Inline unwinding verification test
[ perf record: Woken up 129 times to write data ]
[ perf record: Captured and wrote 32.282 MB /tmp/perf-test-inline-addr2line.L4Sz8QtADJ/perf.data (4014 samples) ]
Inline unwinding verification test [Success]
---- end(0) ----
76: test addr2line inline unwinding : Ok
#
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Tony Jones <tonyj@suse.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
sev_gmem_post_populate() needs to unmap the target vaddr after
copy_from_user() to the vaddr fails.
Fixes: dee5a47cc7 ("KVM: SEV: Add KVM_SEV_SNP_LAUNCH_UPDATE command")
Signed-off-by: Yan Zhao <yan.y.zhao@intel.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Link: https://patch.msgid.link/20260108214622.1084057-2-michael.roth@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
sample__fprintf_callchain() was using map__fprintf_srcline() which won't
report inline line numbers.
Fix by using the srcline from the callchain and falling back to the map
variant.
Fixes: 25da4fab5f ("perf evsel: Move fprintf methods to separate source file")
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Tony Jones <tonyj@suse.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The previous 7 KB per queue caused TX unit hangs under heavy
timestamping load. Reducing to 5 KB avoids these hangs and matches
the TSN recommendation in I225/I226 SW User Manual Section 7.5.4.
The 8 KB "freed" by this change is currently unused. This reduction
is not expected to impact throughput, as the i226 is PCIe-limited
for small TSN packets rather than TX-buffer-limited.
Fixes: 0d58cdc902 ("igc: optimize TX packet buffer utilization for TSN mode")
Reported-by: Zdenek Bouska <zdenek.bouska@siemens.com>
Closes: https://lore.kernel.org/netdev/AS1PR10MB5675DBFE7CE5F2A9336ABFA4EBEAA@AS1PR10MB5675.EURPRD10.PROD.OUTLOOK.COM/
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Chwee-Lin Choong <chwee.lin.choong@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The current HW bug workaround checks the TXTT_0 ready bit first,
then reads TXSTMPL_0 twice (before and after reading TXSTMPH_0)
to detect whether a new timestamp was captured by timestamp
register 0 during the workaround.
This sequence has a race: if a new timestamp is captured after
checking the TXTT_0 bit but before the first TXSTMPL_0 read, the
detection fails because both the "old" and "new" values come from
the same timestamp.
Fix by reading TXSTMPL_0 first to establish a baseline, then
checking the TXTT_0 bit. This ensures any timestamp captured
during the race window will be detected.
Old sequence:
1. Check TXTT_0 ready bit
2. Read TXSTMPL_0 (baseline)
3. Read TXSTMPH_0 (interrupt workaround)
4. Read TXSTMPL_0 (detect changes vs baseline)
New sequence:
1. Read TXSTMPL_0 (baseline)
2. Check TXTT_0 ready bit
3. Read TXSTMPH_0 (interrupt workaround)
4. Read TXSTMPL_0 (detect changes vs baseline)
Fixes: c789ad7cbe ("igc: Work around HW bug causing missing timestamps")
Suggested-by: Avi Shalev <avi.shalev@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Co-developed-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Chwee-Lin Choong <chwee.lin.choong@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The Multi-queue Priority (MQPRIO) and Earliest TxTime First (ETF) offloads
utilize the Time Sensitive Networking (TSN) Tx mode. This mode is always
coupled to IEEE 802.1Qbv time aware shaper (Qbv). Therefore, the driver
sets a default Qbv schedule of all gates opened and a cycle time of
1s. This schedule is set during probe.
However, the following sequence of events lead to Tx issues:
- Boot a dual core system
igc_probe():
igc_tsn_clear_schedule():
-> Default Schedule is set
Note: At this point the driver has allocated two Tx/Rx queues, because
there are only two CPUs.
- ethtool -L enp3s0 combined 4
igc_ethtool_set_channels():
igc_reinit_queues()
-> Default schedule is gone, per Tx ring start and end time are zero
- tc qdisc replace dev enp3s0 handle 100 parent root mqprio \
num_tc 4 map 3 3 2 2 0 1 1 1 3 3 3 3 3 3 3 3 \
queues 1@0 1@1 1@2 1@3 hw 1
igc_tsn_offload_apply():
igc_tsn_enable_offload():
-> Writes zeros to IGC_STQT(i) and IGC_ENDQT(i), causing Tx to stall/fail
Therefore, restore the default Qbv schedule after changing the number of
channels.
Furthermore, add a restriction to not allow queue reconfiguration when
TSN/Qbv is enabled, because it may lead to inconsistent states.
Fixes: c814a2d2d4 ("igc: Use default cycle 'start' and 'end' values for queues")
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The commit 5f6df173f9 ("ice: implement and use rd32_poll_timeout for
ice_sq_done timeout") converted ICE_CTL_Q_SQ_CMD_TIMEOUT from jiffies
to microseconds.
But the ice_release_res() function was missed, and its logic still
treats ICE_CTL_Q_SQ_CMD_TIMEOUT as a jiffies value.
So correct the issue by usecs_to_jiffies().
Found by inspection of the DDP downloading process.
Compile and modprobe tested only.
Fixes: 5f6df173f9 ("ice: implement and use rd32_poll_timeout for ice_sq_done timeout")
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When the user issues an administrative down to an interface that is the
primary for an aggregate bond, the prune lists are being purged. This
breaks communication to the secondary interface, which shares a prune
list on the main switch block while bonded together.
For the primary interface of an aggregate, avoid deleting these prune
lists during stop, and since they are hardcoded to specific values for
the default vlan and QinQ vlans, the attempt to re-add them during the
up phase will quietly fail without any additional problem.
Fixes: 1e0f9881ef ("ice: Flesh out implementation of support for SRIOV on bonded interface")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The u64_stats_sync structure is empty on 64-bit systems. However, on 32-bit
systems it contains a seqcount_t which needs to be initialized. While the
memory is zero-initialized, a lack of u64_stats_init means that lockdep
won't get initialized properly. Fix this by adding u64_stats_init() calls
to the rings just after allocation.
Fixes: 2b245cb294 ("ice: Implement transmit and NAPI support")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Allow the addr2line style to be specified on the `perf report` command
line or in the .perfconfig file.
Committer testing:
The methods:
# perf probe -x ~/bin/perf -F *__addr2line
cmd__addr2line
libbfd__addr2line
libdw__addr2line
llvm__addr2line
#
So if we configure one of them, say 'addr2line':
# perf config addr2line.style=addr2line
# perf config addr2line.style
addr2line.style=addr2line
#
And have probes on all of them:
# perf probe -x ~/bin/perf *__addr2line
Added new events:
probe_perf:cmd__addr2line (on *__addr2line in /home/acme/bin/perf)
probe_perf:llvm__addr2line (on *__addr2line in /home/acme/bin/perf)
probe_perf:libbfd__addr2line (on *__addr2line in /home/acme/bin/perf)
probe_perf:libdw__addr2line (on *__addr2line in /home/acme/bin/perf)
You can now use it in all perf tools, such as:
perf record -e probe_perf:libdw__addr2line -aR sleep 1
#
Only the selected method should be used:
# perf stat -e probe_perf:*_addr2line perf report -f --dso perf --stdio -s srcfile,srcline
# Total Lost Samples: 0
#
# Samples: 4K of event 'cpu/cycles/Pu'
# Event count (approx.): 5535180842
#
# Overhead Source File Source:Line
# ........ ............ ...............
#
99.04% inlineloop.c inlineloop.c:21
0.46% inlineloop.c inlineloop.c:20
#
# (Tip: For hierarchical output, try: perf report --hierarchy)
#
Performance counter stats for 'perf report -f --dso perf --stdio -s srcfile,srcline':
44 probe_perf:cmd__addr2line
0 probe_perf:llvm__addr2line
0 probe_perf:libbfd__addr2line
0 probe_perf:libdw__addr2line
0.035915611 seconds time elapsed
0.028008000 seconds user
0.009051000 seconds sys
#
I checked and that is the case for the other methods.
Also when using:
# perf config addr2line.style=libdw,llvm
Performance counter stats for 'perf report -f --dso perf --stdio -s srcfile,srcline':
0 probe_perf:cmd__addr2line
23 probe_perf:llvm__addr2line
0 probe_perf:libbfd__addr2line
44 probe_perf:libdw__addr2line
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Tony Jones <tonyj@suse.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
err is duplicated with errno, and never used; remove it.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alex Shi <alexs@kernel.org>
Link: https://patch.msgid.link/20260107064009.15380-1-alexs@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
It can be used when we want to add virtio devices to UML while
it's up and running. Virtio devices can be added to UML using
the same syntax as the command line option:
(mconsole) config virtio_uml.device=<socket>:<virtio_id>[:<platform_id>]
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20260106004259.1604736-1-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In seccomp mode, SIGCHLD serves as the child reaper IRQ. So, let's
handle it in the same way as other IRQ signals, including preventing
them from nesting with each other and allowing interrupted syscalls
to be automatically restarted.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20260106001228.1531146-3-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We rely on errno to determine whether a syscall has failed, so we
need to ensure that accessing errno is async-signal-safe. Currently,
we preserve the errno in sig_handler_common(), but it doesn't cover
every possible case. Let's do it in hard_handler() instead, which
is the signal handler we actually register.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20260106001228.1531146-2-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Most Qualcomm platforms feature Gunyah hypervisor, which typically
handles IOMMU configuration. This includes mapping memory regions and
device memory resources for remote processors by intercepting
qcom_scm_pas_auth_and_reset() calls. These mappings are later removed
during teardown. Additionally, SHM bridge setup is required to enable
memory protection for both remoteproc metadata and its memory regions.
When the aforementioned hypervisor is absent, the operating system must
perform these configurations instead.
When Linux runs as the hypervisor (@ EL2) on a SoC, it will have its
own device tree overlay file that specifies the firmware stream ID now
managed by Linux for a particular remote processor. If the iommus
property is specified in the remoteproc device tree node, it indicates
that IOMMU configuration must be handled by Linux. In this case, the
has_iommu flag is set for the remote processor, which ensures that the
resource table, carveouts, and SHM bridge are properly configured before
memory is passed to TrustZone for authentication. Otherwise, the
has_iommu flag remains unset, which indicates default behavior.
Enables Secure PAS support for remote processors when IOMMU configuration
is managed by Linux.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-13-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Qualcomm remote processor may rely on static and dynamic resources for
it to be functional. For most of the Qualcomm SoCs, when run with Gunyah
or older QHEE hypervisor, all the resources whether it is static or
dynamic, is managed by the hypervisor. Dynamic resources if it is
present for a remote processor will always be coming from secure world
via SMC call while static resources may be present in remote processor
firmware binary or it may be coming from SMC call along with dynamic
resources.
Remoteproc already has method like rproc_elf_load_rsc_table() to check
firmware binary has resources or not and if it is not having then we
pass NULL and zero as input resource table and its size argument
respectively to qcom_scm_pas_get_rsc_table() and while it has resource
present then it should pass the present resources to Trustzone(TZ) so that
it could authenticate the present resources and append dynamic resource
to return in output_rt argument along with authenticated resources.
Extend parse_fw callback to include SMC call to get resources from
Trustzone and to leverage resource table parsing and mapping and
unmapping code from the remoteproc framework.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-12-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Qualcomm remote processor may rely on Static and Dynamic resources for
it to be functional. Static resources are fixed like for example,
memory-mapped addresses required by the subsystem and dynamic
resources, such as shared memory in DDR etc., are determined at
runtime during the boot process.
For most of the Qualcomm SoCs, when run with Gunyah or older QHEE
hypervisor, all the resources whether it is static or dynamic, is
managed by the hypervisor. Dynamic resources if it is present for a
remote processor will always be coming from secure world via SMC call
while static resources may be present in remote processor firmware
binary or it may be coming qcom_scm_pas_get_rsc_table() SMC call along
with dynamic resources.
Some of the remote processor drivers, such as video, GPU, IPA, etc., do
not check whether resources are present in their remote processor
firmware binary. In such cases, the caller of this function should set
input_rt and input_rt_size as NULL and zero respectively. Remoteproc
framework has method to check whether firmware binary contain resources
or not and they should be pass resource table pointer to input_rt and
resource table size to input_rt_size and this will be forwarded to
TrustZone for authentication. TrustZone will then append the dynamic
resources and return the complete resource table in the passed output
buffer.
More about documentation on resource table format can be found in
include/linux/remoteproc.h
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-11-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On SoCs running with a non-Gunyah-based hypervisor, Linux must take
responsibility for creating the SHM bridge both for metadata (before
calling qcom_scm_pas_init_image()) and for remoteproc memory (before
calling qcom_scm_pas_auth_and_reset()). We have taken care the things
required for qcom_scm_pas_auth_and_reset(). Lets put these awareness
of above conditions into qcom_scm_pas_init_image() and
qcom_scm_pas_metadata_release().
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-10-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Refactor qcom_scm_pas_init_image() by moving the memory allocation,
copy, and free operations to a higher-level function, and isolate the
actual SMC call in a separate function. The main intention is to allow
flexibility for different allocators and to respect any constraints that
the allocator API may impose before invoking the actual SCM function.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-9-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
For memory passed to TrustZone (TZ), it must either be part of a pool
registered with TZ or explicitly registered via SHMbridge SMC calls.
When Gunyah hypervisor is present, PAS SMC calls from Linux running at
EL1 are trapped by Gunyah running @ EL2, which handles SHMbridge
creation for both metadata and remoteproc carveout memory before
invoking the calls to TZ.
On SoCs running with a non-Gunyah-based hypervisor, Linux must take
responsibility for creating the SHM bridge before invoking PAS SMC
calls. For the auth_and_reset() call, the remoteproc carveout memory
must first be registered with TZ via a SHMbridge SMC call and once
authentication and reset are complete, the SHMbridge memory can be
deregistered.
Introduce qcom_scm_pas_prepare_and_auth_reset(), which sets up the SHM
bridge over the remoteproc carveout memory when Linux operates at EL2.
This behavior is indicated by a new field added to the PAS context data
structure. The function then invokes the auth_and_reset SMC call.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-8-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
qcom_mdt_pas_init() was previously used only by the remoteproc driver
(drivers/remoteproc/qcom_q6v5_pas.c). Since that driver has now
transitioned to using PAS context-based qcom_mdt_pas_load() function,
making qcom_mdt_pas_init() obsolete for external use.
Removes qcom_mdt_pas_init() from the list of exported symbols and make
it static to limit its scope to internal use within mdtloader.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-7-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Introduce a new PAS context-aware function, qcom_mdt_pas_load(), for
remote processor drivers. This function utilizes the PAS context
pointer returned from qcom_scm_pas_ctx_init() to perform firmware
metadata verification and memory setup via SMC calls.
The qcom_mdt_pas_load() and qcom_mdt_load() functions are largely
similar, but the former is designed for clients using the PAS
context-based data structure. Over time, all users of qcom_mdt_load()
can be migrated to use qcom_mdt_pas_load() for consistency and
improved abstraction.
As the remoteproc PAS driver (qcom_q6v5_pas) has already adopted the
PAS context-based approach, update it to use qcom_mdt_pas_load().
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-6-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
As a superset of the existing metadata context, the PAS context
structure enables both remoteproc and non-remoteproc subsystems to
better support scenarios where the SoC runs with or without the Gunyah
hypervisor. To reflect this, relevant SCM and metadata functions are
updated to incorporate PAS context awareness and remove metadata context
data structure completely.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-5-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
