When the Peripheral Authentication Service (PAS) method runs on a SoC
where Linux operates at EL2 (i.e., without the Gunyah hypervisor), the
reset sequences are handled by TrustZone. In such cases, Linux must
perform additional steps before invoking PAS SMC calls, such as creating
a SHM bridge. Therefore, PAS SMC calls require awareness and handling of
these additional steps when Linux runs at EL2.
To support this, there is a need for a data structure that can be
initialized prior to invoking any SMC or MDT functions. This structure
allows those functions to determine whether they are operating in the
presence or absence of the Gunyah hypervisor and behave accordingly.
Currently, remoteproc and non-remoteproc subsystems use different
variants of the MDT loader helper API, primarily due to differences in
metadata context handling. Remoteproc subsystems retain the metadata
context until authentication and reset are completed, while
non-remoteproc subsystems (e.g., video, graphics, IPA, etc.) do not
retain the metadata context and can free it within the
qcom_scm_pas_init() call by passing a NULL context parameter and due to
these differences, it is not possible to extend metadata context
handling to support remoteproc and non remoteproc subsystem use PAS
operations, when Linux operates at EL2.
Add PAS context data structure allocator helper function.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-4-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Peripheral and pas_id refers to unique id for a subsystem and used only
when peripheral authentication service from secure world is utilized.
Lets rename peripheral to pas_id to reflect closer to its meaning.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-3-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The qcom_scm_pas_metadata_release() function already frees the allocated
memory and sets ctx->ptr to NULL. Resetting ctx->phys and ctx->size to
zero is unnecessary because the context is expected to be discarded
after release.
Lets removes redundant assignments.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-2-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On most Qualcomm platforms, the Qualcomm Hypervisor Execution
Environment (QHEE) is either used as a standalone hypervisor or
co-exists as a module with the Gunyah hypervisor. When QHEE is
present, it configures firmware streams for remote processors.
If QHEE is not available, the operating system must perform
these configurations instead and for that remote processor
firmware stream should be presented to the operating system.
To support this, add the iommus property as an optional property
for PAS-supported devices.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260105-kvmrprocv10-v10-1-022e96815380@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Unlike the CPU, the GPU does not throttle its speed automatically when it
reaches high temperatures.
Set up GPU cooling by throttling the GPU speed
when reaching 115°C.
Signed-off-by: Gaurav Kohli <quic_gkohli@quicinc.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250903-a623-gpu-support-v5-4-5398585e2981@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
- Revert bad commit "gfs2: Fix use of bio_chain"
-----BEGIN PGP SIGNATURE-----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=1cPr
-----END PGP SIGNATURE-----
Merge tag 'gfs2-for-6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 revert from Andreas Gruenbacher:
"Revert bad commit "gfs2: Fix use of bio_chain"
I was originally assuming that there must be a bug in gfs2
because gfs2 chains bios in the opposite direction of what
bio_chain_and_submit() expects.
It turns out that the bio chains are set up in "reverse direction"
intentionally so that the first bio's bi_end_io callback is invoked
rather than the last bio's callback.
We want the first bio's callback invoked for the following reason: The
initial bio starts page aligned and covers one or more pages. When it
terminates at a non-page-aligned offset, subsequent bios are added to
handle the remaining portion of the final page.
Upon completion of the bio chain, all affected pages need to be be
marked as read, and only the first bio references all of these pages"
* tag 'gfs2-for-6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
Revert "gfs2: Fix use of bio_chain"
- Avoid freeing stack-allocated node in kvm_async_pf_queue_task
- Clear XSTATE_BV[i] in guest XSAVE state whenever XFD[i]=1
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmlh7zYUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroM6bQgArr0BI1b34xyPmsGk3J0+mUBSeYwp
0aVkegq4BLTDNDY7/yz7jXf9wL0x8uLps/+PJjR3QKpjAAMCwwWi5iQrwoVLsOjO
N9S15Np4Be1fKvpHoB+8z7/uGFhHr9ltpO5wsDOdR2/lpEnZlTZZtD2Wl093DsKV
xoCbddcfgRmx78NV15GnXSTFeTPodHSLQL+96oVN4XZRZVLefYsISnZa66VA5B/2
pl9SndD/zMMo8j6YrrImtuQL6Km+DlqNqNddAXgvQ6JIJ3rO/WgLyxJPaV8trC4Q
n6x8hQcFCRqM+Oi9G0+b4LgfQUPg/0hxPSIZi8yeZAZpJhMb7iEetLXc6A==
=Kew3
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull x86 kvm fixes from Paolo Bonzini:
- Avoid freeing stack-allocated node in kvm_async_pf_queue_task
- Clear XSTATE_BV[i] in guest XSAVE state whenever XFD[i]=1
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
selftests: kvm: Verify TILELOADD actually #NM faults when XFD[18]=1
selftests: kvm: try getting XFD and XSAVE state out of sync
selftests: kvm: replace numbered sync points with actions
x86/fpu: Clear XSTATE_BV[i] in guest XSAVE state whenever XFD[i]=1
x86/kvm: Avoid freeing stack-allocated node in kvm_async_pf_queue_task
ASPEED BMC controllers have VGA and USB functions behind a PCIe-to-PCI
bridge that causes them to share the same StreamID:
[e0]---00.0-[e1-e2]----00.0-[e2]--+-00.0 ASPEED Graphics Family
\-02.0 ASPEED USB Controller
Both devices get StreamID 0x5e200 due to bridge aliasing, causing the USB
controller to be rejected with 'Aliasing StreamID unsupported'.
Per ASPEED, the AST1150 doesn't use a real PCI bus and always forwards
the original Requester ID from downstream devices rather than replacing
it with any alias.
Add a new PCI_DEV_FLAGS_PCI_BRIDGE_NO_ALIAS flag and apply it to the
AST1150.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nirmoy Das <nirmoyd@nvidia.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://patch.msgid.link/20251217154529.377586-2-nirmoyd@nvidia.com
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmll5noTHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXjmoB/0f4VwGDh4rXI+eEDveucx/sPxJviBt
+hLdnNPZfSmi793BGCgLuUC1njModcR8bz8cza9zVo0aLWbcV8occCoE62228k/a
OrwzLDaHkWrMAq/y54kiiv0AB0edOn0IjkYcTwaF/DfIeYsGvtJDw8oYCFQQllH+
xEO/jWMhZXPGpWsKNm1SU0c0Y1nqAVnJ+3j8zQyyGk4WzOCuwsMn+pAR4/F+hmin
kutzij5IwjUqmcb1jwZR3U7GBWPfnURBRFEfDyg093Dw4kaVmXhCENthKSuq5bTw
ndklc4ze51Lzsvk/yIe6cW3b+LCn5/9+OkEVK/nrVh34UFLiCwE6GBDp
=IKNx
-----END PGP SIGNATURE-----
Merge tag 'hyperv-fixes-signed-20260112' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Minor fixes and cleanups for the MSHV driver
* tag 'hyperv-fixes-signed-20260112' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
mshv: release mutex on region invalidation failure
hyperv: Avoid -Wflex-array-member-not-at-end warning
mshv: hide x86-specific functions on arm64
mshv: Initialize local variables early upon region invalidation
mshv: Use PMD_ORDER instead of HPAGE_PMD_ORDER when processing regions
Use defined constant to avoid the possible mistakes and to provide
an additional information on the units.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260112134900.4142954-8-andriy.shevchenko@linux.intel.com
Use defined constant to avoid the possible mistakes and to provide
an additional information on the units.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260112134900.4142954-7-andriy.shevchenko@linux.intel.com
Use defined constant to avoid the possible mistakes and to provide
an additional information on the units.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260112134900.4142954-6-andriy.shevchenko@linux.intel.com
Use defined constant to avoid the possible mistakes and to provide
an additional information on the units.
While at it, drop unneeded 64-bit division, all operands fit 32-bit.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260112134900.4142954-5-andriy.shevchenko@linux.intel.com
Use defined constant to avoid the possible mistakes and to provide
an additional information on the units.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260112134900.4142954-4-andriy.shevchenko@linux.intel.com
Use HZ_PER_GHZ constant instead of custom one. No functional changes.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260112134900.4142954-3-andriy.shevchenko@linux.intel.com
cilium bpf_wiregard.bpf.c when compiled with -O1 fails to load
with the following verifier log:
192: (79) r2 = *(u64 *)(r10 -304) ; R2=pkt(r=40) R10=fp0 fp-304=pkt(r=40)
...
227: (85) call bpf_skb_store_bytes#9 ; R0=scalar()
228: (bc) w2 = w0 ; R0=scalar() R2=scalar(smin=0,smax=umax=0xffffffff,var_off=(0x0; 0xffffffff))
229: (c4) w2 s>>= 31 ; R2=scalar(smin=0,smax=umax=0xffffffff,smin32=-1,smax32=0,var_off=(0x0; 0xffffffff))
230: (54) w2 &= -134 ; R2=scalar(smin=0,smax=umax=umax32=0xffffff7a,smax32=0x7fffff7a,var_off=(0x0; 0xffffff7a))
...
232: (66) if w2 s> 0xffffffff goto pc+125 ; R2=scalar(smin=umin=umin32=0x80000000,smax=umax=umax32=0xffffff7a,smax32=-134,var_off=(0x80000000; 0x7fffff7a))
...
238: (79) r4 = *(u64 *)(r10 -304) ; R4=scalar() R10=fp0 fp-304=scalar()
239: (56) if w2 != 0xffffff78 goto pc+210 ; R2=0xffffff78 // -136
...
258: (71) r1 = *(u8 *)(r4 +0)
R4 invalid mem access 'scalar'
The error might confuse most bpf authors, since fp-304 slot had 'pkt'
pointer at insn 192 and became 'scalar' at 238. That happened because
bpf_skb_store_bytes() clears all packet pointers including those in
the stack. On the first glance it might look like a bug in the source
code, since ctx->data pointer should have been reloaded after the call
to bpf_skb_store_bytes().
The relevant part of cilium source code looks like this:
// bpf/lib/nodeport.h
int dsr_set_ipip6()
{
if (ctx_adjust_hroom(...))
return DROP_INVALID; // -134
if (ctx_store_bytes(...))
return DROP_WRITE_ERROR; // -141
return 0;
}
bool dsr_fail_needs_reply(int code)
{
if (code == DROP_FRAG_NEEDED) // -136
return true;
return false;
}
tail_nodeport_ipv6_dsr()
{
ret = dsr_set_ipip6(...);
if (!IS_ERR(ret)) {
...
} else {
if (dsr_fail_needs_reply(ret))
return dsr_reply_icmp6(...);
}
}
The code doesn't have arithmetic shift by 31 and it reloads ctx->data
every time it needs to access it. So it's not a bug in the source code.
The reason is DAGCombiner::foldSelectCCToShiftAnd() LLVM transformation:
// If this is a select where the false operand is zero and the compare is a
// check of the sign bit, see if we can perform the "gzip trick":
// select_cc setlt X, 0, A, 0 -> and (sra X, size(X)-1), A
// select_cc setgt X, 0, A, 0 -> and (not (sra X, size(X)-1)), A
The conditional branch in dsr_set_ipip6() and its return values
are optimized into BPF_ARSH plus BPF_AND:
227: (85) call bpf_skb_store_bytes#9
228: (bc) w2 = w0
229: (c4) w2 s>>= 31 ; R2=scalar(smin=0,smax=umax=0xffffffff,smin32=-1,smax32=0,var_off=(0x0; 0xffffffff))
230: (54) w2 &= -134 ; R2=scalar(smin=0,smax=umax=umax32=0xffffff7a,smax32=0x7fffff7a,var_off=(0x0; 0xffffff7a))
after insn 230 the register w2 can only be 0 or -134,
but the verifier approximates it, since there is no way to
represent two scalars in bpf_reg_state.
After fallthough at insn 232 the w2 can only be -134,
hence the branch at insn
239: (56) if w2 != -136 goto pc+210
should be always taken, and trapping insn 258 should never execute.
LLVM generated correct code, but the verifier follows impossible
path and rejects valid program. To fix this issue recognize this
special LLVM optimization and fork the verifier state.
So after insn 229: (c4) w2 s>>= 31
the verifier has two states to explore:
one with w2 = 0 and another with w2 = 0xffffffff
which makes the verifier accept bpf_wiregard.c
A similar pattern exists were OR operation is used in place of the AND
operation, the verifier detects that pattern as well by forking the
state before the OR operation with a scalar in range [-1,0].
Note there are 20+ such patterns in bpf_wiregard.o compiled
with -O1 and -O2, but they're rarely seen in other production
bpf programs, so push_stack() approach is not a concern.
Reported-by: Hao Sun <sunhao.th@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Co-developed-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20260112201424.816836-2-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The is going to be a new user of the HZ_PER_GHZ definition besides
possibly existing ones. Add that one to the header.
While at it, split Hz and kHz groups of the multipliers for better
maintenance and readability.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260112134900.4142954-2-andriy.shevchenko@linux.intel.com
Yonghong Song says:
====================
Fix a few selftest failure due to 64K page
Fix a few arm64 selftest failures due to 64K page. Please see each
indvidual patch for why the test failed and how the test gets fixed.
====================
Link: https://patch.msgid.link/20260113061018.3797051-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
With 64K page on arm64, verifier_arena_globals1 failed like below:
...
libbpf: map 'arena': failed to create: -E2BIG
...
#509/1 verifier_arena_globals1/check_reserve1:FAIL
...
For 64K page, if the number of arena pages is (1UL << 20), the total
memory will exceed 4G and this will cause map creation failure.
Adjusting ARENA_PAGES based on the actual page size fixed the problem.
Cc: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/r/20260113061033.3798549-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The current selftest sk_bypass_prot_mem only supports 4K page.
When running with 64K page on arm64, the following failure happens:
...
check_bypass:FAIL:no bypass unexpected no bypass: actual 3 <= expected 32
...
#385/1 sk_bypass_prot_mem/TCP :FAIL
...
check_bypass:FAIL:no bypass unexpected no bypass: actual 4 <= expected 32
...
#385/2 sk_bypass_prot_mem/UDP :FAIL
...
Adding support to 64K page as well fixed the failure.
Cc: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260113061028.3798326-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
On arm64 with 64K page , I observed the following test failure:
...
subtest_dmabuf_iter_check_lots_of_buffers:FAIL:total_bytes_read unexpected total_bytes_read:
actual 4696 <= expected 65536
#97/3 dmabuf_iter/lots_of_buffers:FAIL
With 4K page on x86, the total_bytes_read is 4593.
With 64K page on arm64, the total_byte_read is 4696.
In progs/dmabuf_iter.c, for each iteration, the output is
BPF_SEQ_PRINTF(seq, "%lu\n%llu\n%s\n%s\n", inode, size, name, exporter);
The only difference between 4K and 64K page is 'size' in
the above BPF_SEQ_PRINTF. The 4K page will output '4096' and
the 64K page will output '65536'. So the total_bytes_read with 64K page
is slighter greater than 4K page.
Adjusting the total_bytes_read from 65536 to 4096 fixed the issue.
Cc: T.J. Mercier <tjmercier@google.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260113061023.3798085-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
It's quite likely that only register opcode restrictions exists, in
which case we'd never need to check the normal opcodes. Split
ctx->restricted into two separate fields, one for I/O opcodes, and one
for register opcodes.
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just a cleanup, makes the code easier to read without too many dependent
nested checks.
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Rather than defer this until the rings are enabled, just set it
upfront when the restrictions are parsed and enabled anyway. There's
no reason to defer this setting until the rings are enabled.
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace the pattern of declaring a local regs array from cur_regs()
and then indexing into it with the more concise reg_state() helper.
This simplifies the code by eliminating intermediate variables and
makes register access more consistent throughout the verifier.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20260113134826.2214860-1-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Rather than leave this to the caller, have io_parse_restrictions() set
->registered = true if restrictions have been enabled. This is in
preparation for having finer grained restrictions.
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Rather than return 0 on success, return >= 0 for success, where the
return value is that number of parsed entries. As before, any < 0
return is an error.
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Update dw_i3c_master_restore_addrs() to preserve existing bits in each
Device Address Table (DAT) entry when restoring addresses. This prevents
overwriting configuration bits during PM runtime resumes.
Signed-off-by: Adrian Ng Ho Yin <adrianhoyin.ng@altera.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/46112c0da44110f46709cb0e7a4595e312b95c10.1765529948.git.adrianhoyin.ng@altera.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add DEV_ADDR_TABLE_DYNAMIC_MASK / DEV_ADDR_TABLE_DYNAMIC_ADDR(x) for
dynamic device addresses and DEV_ADDR_TABLE_STATIC_MASK /
DEV_ADDR_TABLE_STATIC_ADDR(x) for static device addresses in the I3C
address table. Replace manual shift-and-mask with FIELD_PREP() for both
dynamic and static addresses for clarity and maintainability.
Signed-off-by: Adrian Ng Ho Yin <adrianhoyin.ng@altera.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/d72896e510db1870d26a794f131f600c7e42cf00.1765529948.git.adrianhoyin.ng@altera.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The DesignWare I3C controller supports automatically retrying transactions
when a device NACKs. This is useful for slave devices that may be
temporarily busy and not ready to respond immediately.
Add new ops to configure all active DAT entry with dev_nack_retry during
runtime. Returns error when value exceeds hw specified limit.
Signed-off-by: Adrian Ng Ho Yin <adrianhoyin.ng@altera.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/f09ee67e61d31f0a12a0bf48f01e9057ca9e2fb7.1765529948.git.adrianhoyin.ng@altera.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Document sysfs attribute dev_nack_retry_cnt that controls the number of
automatic retries performed by the I3C controller when a target device
returns a NACK
Add a `dev_nack_retry_count` sysfs attribute to allow reading and updating
the device NACK retry count. A new `dev_nack_retry_count` field and an
optional `set_dev_nack_retry()` callback are added to
i3c_master_controller. The attribute is created only when the callback is
implemented.
Updates are applied under the I3C bus maintenance lock to ensure safe
hardware reconfiguration.
Signed-off-by: Adrian Ng Ho Yin <adrianhoyin.ng@altera.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/3c4b5082bde64024fc383c44bebeef89ad3c7ed3.1765529948.git.adrianhoyin.ng@altera.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Merge series from Jon Hunter <jonathanh@nvidia.com>:
This series includes fixes for the realtek,rt5640 dt-binding to address
a few warnings that are observed when running the CHECK_DTBS=y for some
DTBs that use this codec.
- Reorder some #define blocks
- Document mixer/volume levels
- Document some Ctl request fields (tag, len)
- replace some magic numbers with macros
No functional change intended. The information is based on reverse
engineering.
Signed-off-by: fenugrec <fenugrec@mail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260111-preso_clean1-v2-2-44b4e5129a75@mail.com
Add imx_rproc_cfg_imx95_m7 and address(TCM and DDR) mapping.
Add i.MX95 of_device_id entry.
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20260109-imx95-rproc-2026-1-8-v6-6-d2fefb36263d@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
When the System Manager configuration places the M7 core in the same
Logical Machine(LM) as the A55 cores (M7 LM ID equals A55 LM ID), Linux
can control M7 using the CPU protocol API. For more details, see the
previous patch that adds LMM API support.
Changes include:
- Introduce imx_rproc_ops_sm_cpu for CPU API operations.
- Reuse imx_rproc_sm_detect_mode to detect shared LM and set priv->ops to
imx_rproc_ops_sm_cpu.
- Implement imx_rproc_sm_cpu_{start,stop} to handle M7 start and stop.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20260109-imx95-rproc-2026-1-8-v6-5-d2fefb36263d@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Move the selinux_blob_sizes struct so it adjacent to the rest of the
SELinux initialization code and not in the middle of the LSM hook
callbacks.
Signed-off-by: Paul Moore <paul@paul-moore.com>
i.MX95 features a Cortex-M33 core, six Cortex-A55 cores, and
one Cortex-M7 core. The System Control Management Interface(SCMI)
firmware runs on the M33 core. The i.MX95 SCMI firmware named System
Manager(SM) includes vendor extension protocols, Logical Machine
Management(LMM) protocol and CPU protocol and etc.
Depending on SM configuration, M7 can be used as follows:
(1) M7 in a separate Logical Machine (LM) from A55 cores, that Linux
can't control
(2) M7 in a separate LM from A55 cores that Linux can control using LMM
protocol.
(3) M7 runs in same Logical Machine as A55 cores, so Linux can control it
using CPU protocol
So extend the driver to using LMM and CPU protocol to manage the M7 core.
- Compare linux LM ID(got using scmi_imx_lmm_info) and M7 LM ID(the ID
is fixed as 1 in SM firmware if M7 is in a separate LM),
if Linux LM ID is not same as M7 LM ID(linux and M7 in same LM), use
LMM protocol to start/stop. CPU protocol support will be added in the
following patch. Whether using CPU or LMM protocol to start/stop, the
M7 status detection could use CPU protocol to detect started or not. So
in imx_rproc_detect_mode, use scmi_imx_cpu_started to check the
status of M7.
- For above case (1) and (2), Use SCMI_IMX_LMM_POWER_ON to detect whether
the M7 LM is under control of A55 LM.
- For above case , after using SCMI_IMX_LMM_POWER_ON to check
permission, SCMI_IMX_LMM_SHUTDOWN API should be called to shutdown
the M7 LM to save power only when M7 LM is going to be started by
remoteproc framework. Otherwise bypass SCMI_IMX_LMM_SHUTDOWN API if
M7 LM is started before booting Linux.
Current setup relies on pre-Linux software(U-Boot) to do M7 TCM ECC
initialization. In future, we could add the support in Linux to decouple
U-Boot and Linux.
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20260109-imx95-rproc-2026-1-8-v6-4-d2fefb36263d@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Allow each platform to provide its own prepare operations, preparing
for i.MX95 LMM and CPU ops support.
No functional changes.
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20260109-imx95-rproc-2026-1-8-v6-3-d2fefb36263d@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Structure imx_rproc_dcfg contains a const pointer to imx_rproc_plat_ops,
which defines the start/stop/detect_mode operations for a remote processor.
To preserve the const correctness of the static configuration while
allowing runtime modification of ops behavior, introduce a new
imx_rproc_plat_ops member in struct imx_rproc named `ops`.
During initialization, dcfg->ops is assigned to priv->ops.
Enable the driver to safely override ops at runtime without affecting the
original const configuration.
Improve flexibility for platforms that require dynamic operation switching
(e.g. i.MX95 Logical Machine ops and CPU ops).
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20260109-imx95-rproc-2026-1-8-v6-2-d2fefb36263d@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Add compatible string for the Cortex-M7 core in i.MX95
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20260109-imx95-rproc-2026-1-8-v6-1-d2fefb36263d@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The minimum/maximum DSC input (i.e. pipe) and compressed (i.e. link) BPP
limits are computed already in intel_dp_compute_config_limits(), so
there is no need to do this again in
mst_stream_dsc_compute_link_config() called later. Remove the
corresponding alignments from the latter function and use the
precomputed (aligned and within bounds) maximum pipe BPP and the min/max
compressed BPP values instead as-is.
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251222153547.713360-21-imre.deak@intel.com
intel_edp_dsc_compute_pipe_bpp() matches now
intel_dp_dsc_compute_pipe_bpp(), remove the former function.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251222153547.713360-20-imre.deak@intel.com
Move computing the eDP compressed BPP value to the function computing
this for DP, allowing further simplifications later.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251222153547.713360-19-imre.deak@intel.com
If dsc_compute_compressed_bpp() failed with a forced pipe BPP value
(where the forced pipe BPP value itself is valid within the min/max pipe
BPP limits), the function will also fail when called with the maximum
pipe BPP value: dsc_compute_compressed_bpp() will try all compressed
BPPs below the passed in pipe BPP value and if the function failed with
a given (low) compressed BPP value it will also fail with a compressed
BPP value higher than the one which failed already.
Based on the above remove the logic to retry computing a compressed BPP
value with the maximum pipe BPP value if computing the compressed BPP
failed already with the (lower) forced pipe BPP value.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251222153547.713360-18-imre.deak@intel.com
The maximum pipe BPP value (used as the DSC input BPP) has been aligned
already to the corresponding source/sink input BPP capabilities in
intel_dp_compute_config_limits(). So it isn't needed to perform the same
alignment again in intel_dp_dsc_compute_pipe_bpp() called later, this
function can simply use the already aligned maximum pipe BPP value, do
that.
Also, there is no point in trying pipe BPP values lower than the
maximum: this would only make dsc_compute_compressed_bpp() start with a
lower _compressed_ BPP value, but this lower compressed BPP value has
been tried already when dsc_compute_compressed_bpp() was called with the
higher pipe BPP value (i.e. the first dsc_compute_compressed_bpp() call
tries already all the possible compressed BPP values which are all below
the pipe BPP value passed to it). Simplify the function accordingly
trying only the maximum pipe BPP value.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251222153547.713360-17-imre.deak@intel.com
