DAMON_STAT updates 'enabled' parameter value, which represents the running
status of its kdamond, when the user explicitly requests start/stop of the
kdamond. The kdamond can, however, be stopped even if the user explicitly
requested the stop, if ctx->regions_score_histogram allocation failure at
beginning of the execution of the kdamond. Hence, if the kdamond is
stopped by the allocation failure, the value of the parameter can be
stale.
Users could show the stale value and be confused. The problem will only
rarely happen in real and common setups because the allocation is arguably
too small to fail. Also, unlike the similar bugs that are now fixed in
DAMON_RECLAIM and DAMON_LRU_SORT, kdamond can be restarted in this case,
because DAMON_STAT force-updates the enabled parameter value for user
inputs. The bug is a bug, though.
The issue stems from the fact that there are multiple events that can
change the status, and following all the events is challenging.
Dynamically detect and use the fresh status for the parameters when those
are requested.
The issue was dicovered [1] by Sashiko.
Link: https://lore.kernel.org/20260419161003.79176-4-sj@kernel.org
Link: https://lore.kernel.org/20260416040602.88665-1-sj@kernel.org [1]
Fixes: 369c415e60 ("mm/damon: introduce DAMON_STAT module")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Liew Rui Yan <aethernet65535@gmail.com>
Cc: <stable@vger.kernel.org> # 6.17.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON_LRU_SORT updates 'enabled' and 'kdamond_pid' parameter values, which
represents the running status of its kdamond, when the user explicitly
requests start/stop of the kdamond. The kdamond can, however, be stopped
in events other than the explicit user request in the following three
events.
1. ctx->regions_score_histogram allocation failure at beginning of the
execution,
2. damon_commit_ctx() failure due to invalid user input, and
3. damon_commit_ctx() failure due to its internal allocation failures.
Hence, if the kdamond is stopped by the above three events, the values of
the status parameters can be stale. Users could show the stale values and
be confused. This is already bad, but the real consequence is worse.
DAMON_LRU_SORT avoids unnecessary damon_start() and damon_stop() calls
based on the 'enabled' parameter value. And the update of 'enabled'
parameter value depends on the damon_start() and damon_stop() call
results. Hence, once the kdamond has stopped by the unintentional events,
the user cannot restart the kdamond before the system reboot. For
example, the issue can be reproduced via below steps.
# cd /sys/module/damon_lru_sort/parameters
#
# # start DAMON_LRU_SORT
# echo Y > enabled
# ps -ef | grep kdamond
root 806 2 0 17:53 ? 00:00:00 [kdamond.0]
root 808 803 0 17:53 pts/4 00:00:00 grep kdamond
#
# # commit wrong input to stop kdamond withou explicit stop request
# echo 3 > addr_unit
# echo Y > commit_inputs
bash: echo: write error: Invalid argument
#
# # confirm kdamond is stopped
# ps -ef | grep kdamond
root 811 803 0 17:53 pts/4 00:00:00 grep kdamond
#
# # users casn now show stable status
# cat enabled
Y
# cat kdamond_pid
806
#
# # even after fixing the wrong parameter,
# # kdamond cannot be restarted.
# echo 1 > addr_unit
# echo Y > enabled
# ps -ef | grep kdamond
root 815 803 0 17:54 pts/4 00:00:00 grep kdamond
The problem will only rarely happen in real and common setups for the
following reasons. The allocation failures are unlikely in such setups
since those allocations are arguably too small to fail. Also sane users
on real production environments may not commit wrong input parameters.
But once it happens, the consequence is quite bad. And the bug is a bug.
The issue stems from the fact that there are multiple events that can
change the status, and following all the events is challenging.
Dynamically detect and use the fresh status for the parameters when those
are requested.
Link: https://lore.kernel.org/20260419161003.79176-3-sj@kernel.org
Fixes: 40e983cca9 ("mm/damon: introduce DAMON-based LRU-lists Sorting")
Co-developed-by: Liew Rui Yan <aethernet65535@gmail.com>
Signed-off-by: Liew Rui Yan <aethernet65535@gmail.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> # 6.0.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon/modules: detect and use fresh status", v3.
DAMON modules including DAMON_RECLAIM, DAMON_LRU_SORT and DAMON_STAT
commonly expose the kdamond running status via their parameters. Under
certain scenarios including wrong user inputs and memory allocation
failures, those parameter values can be stale. It can confuse users. For
DAMON_RECLAIM and DAMON_LRU_SORT, it even makes the kdamond unable to be
restarted before the system reboot.
The problem comes from the fact that there are multiple events for the
status changes and it is difficult to follow up all the scenarios. Fix
the issue by detecting and using the status on demand, instead of using a
cached status that is difficult to be updated.
Patches 1-3 fix the bugs in DAMON_RECLAIM, DAMON_LRU_SORT and DAMON_STAT
in the order.
This patch (of 3):
DAMON_RECLAIM updates 'enabled' and 'kdamond_pid' parameter values, which
represents the running status of its kdamond, when the user explicitly
requests start/stop of the kdamond. The kdamond can, however, be stopped
in events other than the explicit user request in the following three
events.
1. ctx->regions_score_histogram allocation failure at beginning of the
execution,
2. damon_commit_ctx() failure due to invalid user input, and
3. damon_commit_ctx() failure due to its internal allocation failures.
Hence, if the kdamond is stopped by the above three events, the values of
the status parameters can be stale. Users could show the stale values and
be confused. This is already bad, but the real consequence is worse.
DAMON_RECLAIM avoids unnecessary damon_start() and damon_stop() calls
based on the 'enabled' parameter value. And the update of 'enabled'
parameter value depends on the damon_start() and damon_stop() call
results. Hence, once the kdamond has stopped by the unintentional events,
the user cannot restart the kdamond before the system reboot. For
example, the issue can be reproduced via below steps.
# cd /sys/module/damon_reclaim/parameters
#
# # start DAMON_RECLAIM
# echo Y > enabled
# ps -ef | grep kdamond
root 806 2 0 17:53 ? 00:00:00 [kdamond.0]
root 808 803 0 17:53 pts/4 00:00:00 grep kdamond
#
# # commit wrong input to stop kdamond withou explicit stop request
# echo 3 > addr_unit
# echo Y > commit_inputs
bash: echo: write error: Invalid argument
#
# # confirm kdamond is stopped
# ps -ef | grep kdamond
root 811 803 0 17:53 pts/4 00:00:00 grep kdamond
#
# # users casn now show stable status
# cat enabled
Y
# cat kdamond_pid
806
#
# # even after fixing the wrong parameter,
# # kdamond cannot be restarted.
# echo 1 > addr_unit
# echo Y > enabled
# ps -ef | grep kdamond
root 815 803 0 17:54 pts/4 00:00:00 grep kdamond
The problem will only rarely happen in real and common setups for the
following reasons. The allocation failures are unlikely in such setups
since those allocations are arguably too small to fail. Also sane users
on real production environments may not commit wrong input parameters.
But once it happens, the consequence is quite bad. And the bug is a bug.
The issue stems from the fact that there are multiple events that can
change the status, and following all the events is challenging.
Dynamically detect and use the fresh status for the parameters when those
are requested.
Link: https://lore.kernel.org/20260419161003.79176-1-sj@kernel.org
Link: https://lore.kernel.org/20260419161003.79176-2-sj@kernel.org
Fixes: e035c280f6 ("mm/damon/reclaim: support online inputs update")
Co-developed-by: Liew Rui Yan <aethernet65535@gmail.com>
Signed-off-by: Liew Rui Yan <aethernet65535@gmail.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> # 5.19.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Several of the mm selftests made use of /proc/pid/mem as part of their
operation but we do not specify this in the config fragment for them, at
least mkdirty and ksm_functional_tests have this requirement.
This has been working fine in practice since PROC_MEM_ALWAYS_FORCE was the
default setting but commit 599bbba5a3 ("proc: make PROC_MEM_FORCE_PTRACE
the Kconfig default") that is no longer the case, meaning that tests run
on kernels built based on defconfigs have started having the new more
restrictive default and failing. Add PROC_MEM_ALWAYS_FORCE to the config
fragment for the mm selftests.
Thanks to Aishwarya TCV for spotting the issue and identifying the commit
that introduced it.
Link: https://lore.kernel.org/20260416-selftests-mm-proc-mem-always-force-v1-1-3f5865153c67@kernel.org
Fixes: 599bbba5a3 ("proc: make PROC_MEM_FORCE_PTRACE the Kconfig default")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reported-by: Aishwarya TCV <aishwarya.tcv@arm.com>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
damon_sysfs_quot_goal->path can be read and written by users, via DAMON
sysfs 'path' file. It can also be indirectly read, for the parameters
{on,off}line committing to DAMON. The reads for parameters committing are
protected by damon_sysfs_lock to avoid the sysfs files being destroyed
while any of the parameters are being read. But the user-driven direct
reads and writes are not protected by any lock, while the write is
deallocating the path-pointing buffer. As a result, the readers could
read the already freed buffer (user-after-free). Note that the user-reads
don't race when the same open file is used by the writer, due to kernfs's
open file locking. Nonetheless, doing the reads and writes with separate
open files would be common. Fix it by protecting both the user-direct
reads and writes with damon_sysfs_lock.
Link: https://lore.kernel.org/20260423150253.111520-3-sj@kernel.org
Fixes: c41e253a41 ("mm/damon/sysfs-schemes: implement path file under quota goal directory")
Co-developed-by: Junxi Qian <qjx1298677004@gmail.com>
Signed-off-by: Junxi Qian <qjx1298677004@gmail.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> # 6.19.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon/sysfs-schemes: fix use-after-free for [memcg_]path".
Reads of 'memcg_path' and 'path' files in DAMON sysfs interface could race
with their writes, results in use-after-free. Fix those.
This patch (of 2):
damon_sysfs_scheme_filter->mmecg_path can be read and written by users,
via DAMON sysfs memcg_path file. It can also be indirectly read, for the
parameters {on,off}line committing to DAMON. The reads for parameters
committing are protected by damon_sysfs_lock to avoid the sysfs files
being destroyed while any of the parameters are being read. But the
user-driven direct reads and writes are not protected by any lock, while
the write is deallocating the memcg_path-pointing buffer. As a result,
the readers could read the already freed buffer (user-after-free). Note
that the user-reads don't race when the same open file is used by the
writer, due to kernfs's open file locking. Nonetheless, doing the reads
and writes with separate open files would be common. Fix it by protecting
both the user-direct reads and writes with damon_sysfs_lock.
Link: https://lore.kernel.org/20260423150253.111520-1-sj@kernel.org
Link: https://lore.kernel.org/20260423150253.111520-2-sj@kernel.org
Fixes: 4f489fe6af ("mm/damon/sysfs-schemes: free old damon_sysfs_scheme_filter->memcg_path on write")
Co-developed-by: Junxi Qian <qjx1298677004@gmail.com>
Signed-off-by: Junxi Qian <qjx1298677004@gmail.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> # 6.16.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Update my email address as my work email account is no longer in use.
Also update .mailmap.
Link: https://lore.kernel.org/20260423132649.31126-1-li.wang@linux.dev
Signed-off-by: Li Wang <li.wang@linux.dev>
Reviewed-by: Cyril Hrubis <chrubis@suse.cz>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jakub Kacinski <kuba@kernel.org>
Cc: Li Wang <liwang@redhat.com>
Cc: Martin Kepplinger <martink@posteo.de>
Cc: Shannon Nelson <sln@onemain.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Switching to private email address. Update all contact information
Add an entry to mailmap at the same time.
Link: https://lore.kernel.org/20260422184310.2682901-1-liam@infradead.org
Signed-off-by: Liam R. Howlett <liam@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When the user requests a total hugetlb CMA size without per-node
specification, hugetlb_cma_reserve() computes per_node from
hugetlb_cma_size and the number of nodes that have memory
per_node = DIV_ROUND_UP(hugetlb_cma_size,
nodes_weight(hugetlb_bootmem_nodes));
The reservation loop later computes
size = round_up(min(per_node, hugetlb_cma_size - reserved),
PAGE_SIZE << order);
So the actually reserved per_node size is multiple of (PAGE_SIZE <<
order), but the logged per_node is not rounded up, so it may be smaller
than the actual reserved size.
For example, as the existing comment describes, if a 3 GB area is
requested on a machine with 4 NUMA nodes that have memory, 1 GB is
allocated on the first three nodes, but the printed log is
hugetlb_cma: reserve 3072 MiB, up to 768 MiB per node
Round per_node up to (PAGE_SIZE << order) before logging so that the
printed log always matches the actual reserved size. No functional change
to the actual reservation size, as the following case analysis shows
1. remaining (hugetlb_cma_size - reserved) >= rounded per_node
- AS-IS: min() picks unrounded per_node;
round_up() returns rounded per_node
- TO-BE: min() picks rounded per_node;
round_up() returns rounded per_node (no-op)
2. remaining < unrounded per_node
- AS-IS: min() picks remaining;
round_up() returns round_up(remaining)
- TO-BE: min() picks remaining;
round_up() returns round_up(remaining)
3. unrounded per_node <= remaining < rounded per_node
- AS-IS: min() picks unrounded per_node;
round_up() returns rounded per_node
- TO-BE: min() picks remaining;
round_up() returns round_up(remaining) equals rounded per_node
Link: https://lore.kernel.org/20260422143353.852257-1-ekffu200098@gmail.com
Fixes: cf11e85fc0 ("mm: hugetlb: optionally allocate gigantic hugepages using cma") # 5.7
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Reviewed-by: Muchun Song <muchun.song@linux.dev>
Cc: David Hildenbrand <david@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The pattern "include/linux/page[-_]*" matches every file that starts with
"page", because it's a regex and not a glob (so it has the meaning of
include/linux/page + match [-_] 0+ times).
Fix it up into a more regex-correct expression. Doing so reduces CC's
drastically in patches that touch pagemap.h (which is maintained as part
of PAGE CACHE).
As a side-effect, move linux/pageblock-flags.h explicitly under PAGE
ALLOCATOR.
Link: https://lore.kernel.org/linux-mm/20260422005608.342028-1-fmayle@google.com/
Link: https://lore.kernel.org/20260422123726.517220-1-pfalcato@suse.de
Signed-off-by: Pedro Falcato <pfalcato@suse.de>
Reviewed-by: Lorenzo Stoakes <ljs@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Acked-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The mmap_prepare hook functionality includes the ability to invoke
mmap_prepare() from the mmap() hook of existing 'stacked' drivers, that is
ones which are capable of calling the mmap hooks of other drivers/file
systems (e.g. overlayfs, shm).
As part of the mmap_prepare action functionality, we deal with errors by
unmapping the VMA should one arise. This works in the usual mmap_prepare
case, as we invoke this action at the last moment, when the VMA is
established in the maple tree.
However, the mmap() hook passes a not-fully-established VMA pointer to the
caller (which is the motivation behind the mmap_prepare() work), which is
detached.
So attempting to unmap a VMA in this state will be problematic, with the
most obvious symptom being a warning in vma_mark_detached(), because the
VMA is already detached.
It's also unncessary - the mmap() handler will clean up the VMA on error.
So to fix this issue, this patch propagates whether or not an mmap action
is being completed via the compatibility layer or directly.
If the former, then we do not attempt VMA cleanup, if the latter, then we
do.
This patch also updates the userland VMA tests to reflect the change.
Link: https://lore.kernel.org/20260421102150.189982-1-ljs@kernel.org
Fixes: ac0a3fc9c0 ("mm: add ability to take further action in vm_area_desc")
Signed-off-by: Lorenzo Stoakes <ljs@kernel.org>
Reported-by: syzbot+db390288d141a1dccf96@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/69e69734.050a0220.24bfd3.0027.GAE@google.com/
Cc: David Hildenbrand <david@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Pedro Falcato <pfalcato@suse.de>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The proactive nr_dirty > gdtc->bg_thresh check in balance_dirty_pages()
only checks the global dirty threshold to start background writeback while
the writer is still free-running, but for strictlimit BDIs (eg fuse), the
per-wb dirty count can exceed the per-wb background threshold while the
global threshold is not yet exceeded, so background writeback for this
case never gets proactively started.
Add a per-wb threshold check for strictlimit BDIs so that background
writeback is started when wb_dirty exceeds wb_bg_thresh, which drains
dirty pages before the writer hits the throttle wall, matching the
proactive behavior that the global check provides for non-strictlimit
BDIs.
fio runs on fuse show about a 3-4% improvement in perf for buffered
writes:
fio --name=writeback_test --ioengine=psync --rw=write --bs=128k \
--size=2G --numjobs=4 --ramp_time=10 --runtime=20 \
--time_based --group_reporting=1 --direct=0
Link: https://lore.kernel.org/20260326234629.840938-2-joannelkoong@gmail.com
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fix two error handling issues in kho_add_subtree(), where it doesn't
handle the error path correctly.
1. If fdt_setprop() fails after the subnode has been created, the
subnode is not removed. This leaves an incomplete node in the FDT
(missing "preserved-data" or "blob-size" properties).
2. The fdt_setprop() return value (an FDT error code) is stored
directly in err and returned to the caller, which expects -errno.
Fix both by storing fdt_setprop() results in fdt_err, jumping to a new
out_del_node label that removes the subnode on failure, and only setting
err = 0 on the success path, otherwise returning -ENOMEM (instead of
FDT_ERR_ errors that would come from fdt_setprop).
No user-visible changes. This patch fixes error handling in the KHO
(Kexec HandOver) subsystem, which is used to preserve data across kexec
reboots. The fix only affects a rare failure path during kexec
preparation — specifically when the kernel runs out of space in the
Flattened Device Tree buffer while registering preserved memory regions.
In the unlikely event that this error path was triggered, the old code
would leave a malformed node in the device tree and return an incorrect
error code to the calling subsystem, which could lead to confusing log
messages or incorrect recovery decisions. With this fix, the incomplete
node is properly cleaned up and the appropriate errno value is propagated,
this error code is not returned to the user.
Link: https://lore.kernel.org/20260410-kho_fix_send-v2-1-1b4debf7ee08@debian.org
Fixes: 3dc92c3114 ("kexec: add Kexec HandOver (KHO) generation helpers")
Signed-off-by: Breno Leitao <leitao@debian.org>
Suggested-by: Pratyush Yadav <pratyush@kernel.org>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: Breno Leitao <leitao@debian.org>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When session allocation fails during deserialization, the global 'err'
variable was not updated before returning. This caused subsequent calls
to luo_session_deserialize() to incorrectly report success.
Ensure 'err' is set to the error code from PTR_ERR(session). This ensures
that an error is correctly returned to userspace when it attempts to open
/dev/liveupdate in the new kernel if deserialization failed.
Link: https://lore.kernel.org/20260415193738.515491-1-pasha.tatashin@soleen.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Cc: David Matlack <dmatlack@google.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Samiullah Khawaja <skhawaja@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 4c5d336588 ("mm/vmalloc: allow to set node and align in
vrealloc") added the ability to force a new allocation if the current
pointer is on the wrong NUMA node, or if an alignment constraint is not
met, even if the user is shrinking the allocation.
On this path (need_realloc), the code allocates a new object of 'size'
bytes and then memcpy()s 'old_size' bytes into it. If the request is to
shrink the object (size < old_size), this results in an out-of-bounds
write on the new buffer.
Fix this by bounding the copy length by the new allocation size.
Link: https://lore.kernel.org/20260420114805.3572606-2-elver@google.com
Fixes: 4c5d336588 ("mm/vmalloc: allow to set node and align in vrealloc")
Signed-off-by: Marco Elver <elver@google.com>
Reported-by: Harry Yoo (Oracle) <harry@kernel.org>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Acked-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Reviewed-by: Harry Yoo (Oracle) <harry@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In scpsys_get_bus_protection_legacy(), of_find_node_with_property()
returns a device node with its reference count incremented. The function
then calls of_node_put(node) before checking whether
syscon_regmap_lookup_by_phandle() returns an error. If an error occurs,
dev_err_probe() dereferences the node pointer to print diagnostic
information, but the node memory may have already been freed due to the
earlier of_node_put(), leading to a use-after-free vulnerability.
Fix this by moving the of_node_put() call after the error check, ensuring
the node is still valid when accessed in the error path.
Fixes: c29345fa5f ("pmdomain: mediatek: Refactor bus protection regmaps retrieval")
Cc: stable@vger.kernel.org
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Commit cac173bea5 ("ACPI: processor: idle: Rework the handling of
acpi_processor_ffh_lpi_probe()") moved the acpi_processor_ffh_lpi_probe()
call from acpi_processor_setup_cpuidle_dev(), where its return value was
ignored, to acpi_processor_get_power_info(), where it is now treated as
a hard failure. As a result, platforms where psci_acpi_cpu_init_idle()
returned -ENODEV stopped registering any cpuidle states, forcing CPUs to
busy-poll when idle.
On NVIDIA Grace (aarch64) systems with PSCIv1.1, pr->power.count is 1
(only WFI, no deep PSCI states beyond it), so the previous
"count = pr->power.count - 1; if (count <= 0) return -ENODEV;" check
returned -ENODEV for all 72 CPUs and disabled cpuidle entirely.
The lpi_states count is already validated in acpi_processor_get_lpi_info(),
so the check here is redundant. Simplify the loop to iterate over
lpi_states[1..power.count). When only WFI is present, the loop body
simply does not execute and the function returns 0, which is the correct
outcome: there is nothing to validate for FFH and no error to report.
Suggested-by: Huisong Li <lihuisong@huawei.com>
Cc: stable@vger.kernel.org
Fixes: cac173bea5 ("ACPI: processor: idle: Rework the handling of acpi_processor_ffh_lpi_probe()")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Sudeep Holla <sudeep.holla@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
create_card() takes a reference on the USB device with usb_get_dev()
and stores the matching usb_put_dev() in card_free(), which is
installed as the snd_card's ->private_free destructor.
However, ->private_free is only assigned near the end of init_card(),
after several failure points (usb_set_interface(), EP type checks,
usb_submit_urb(), the EP1_CMD_GET_DEVICE_INFO exchange, and its
timeout). When any of those fail, init_card() returns an error to
snd_probe(), which calls snd_card_free(card). Because ->private_free
is still NULL, card_free() never runs, the usb_get_dev() reference
is not dropped, and the struct usb_device leaks along with its
descriptor allocations and device_private.
syzbot reproduces this with a malformed UAC3 device whose only valid
altsetting is 0; init_card()'s usb_set_interface(usb_dev, 0, 1) call
fails with -EIO and triggers the leak.
Move the ->private_free assignment into create_card(), immediately
after usb_get_dev(), so that every error path reaching snd_card_free()
balances the reference. card_free()'s callees (snd_usb_caiaq_input_free,
free_urbs, kfree) already tolerate the partially-initialized state
because the chip private area is zero-initialized by snd_card_new().
Fixes: 80bb50e2d4 ("ALSA: caiaq: take a reference on the USB device in create_card()")
Reported-by: syzbot+2afd7e71155c7e241560@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=2afd7e71155c7e241560
Tested-by: syzbot+2afd7e71155c7e241560@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Link: https://patch.msgid.link/20260426001934.70813-1-kartikey406@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If a device is attached to a PM domain through genpd_dev_pm_attach_by_id(),
genpd calls pm_runtime_enable() for the corresponding virtual device that
it registers. While this avoids boilerplate code in drivers, there is no
corresponding call to pm_runtime_disable() in genpd_dev_pm_detach().
This means these virtual devices are typically detached from its genpd,
while runtime PM remains enabled for them, which is not how things are
designed to work. In worst cases it may lead to critical errors, like a
NULL pointer dereference bug in genpd_runtime_suspend(), which was recently
reported. For another case, we may end up keeping an unnecessary vote for a
performance state for the device.
To fix these problems, let's add this missing call to pm_runtime_disable()
in genpd_dev_pm_detach().
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/all/CAMuHMdWapT40hV3c+CSBqFOW05aWcV1a6v_NiJYgoYi0i9_PDQ@mail.gmail.com/
Fixes: 3c095f32a9 ("PM / Domains: Add support for multi PM domains per device to genpd")
Cc: stable@vger.kernel.org
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add a missing sanity check for bNrChannels in detect_usb_format()
to prevent a division by zero in playback_urb_complete() and
capture_urb_complete().
USB core does not validate class-specific descriptor fields such
as bNrChannels, so drivers must verify them before use. If a
device provides bNrChannels = 0, frame_bytes becomes zero and is
later used as a divisor in the URB completion handlers, leading
to a kernel crash.
Fixes: 63978ab3e3 ("sound: add Edirol UA-101 support")
Cc: stable@vger.kernel.org
Signed-off-by: SeungJu Cheon <suunj1331@gmail.com>
Link: https://patch.msgid.link/20260426111239.103296-1-suunj1331@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This device, just like the Playstation 5's DualSense, has a volume
that's too low, hid-playstation solves this by raising the minimum
volume on the device itself by sending an output report, third party PS5
controllers/accessories do not support this output report format, so we
apply a quirk to raise the minimum volume by 6dB.
Signed-off-by: Rosalie Wanders <rosalie@mailbox.org>
Link: https://patch.msgid.link/20260426025520.3985-2-rosalie@mailbox.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
kconfiglint reports:
M004: 'snd-hda-codec-cmedia-y' assigned with ':=' but was already
assigned at line 5; previous value is overwritten
sound/hda/codecs/Makefile contains duplicate entries for the C-Media
codec driver — both the composite module definition and the obj-* build
target appear twice:
Line 5: snd-hda-codec-cmedia-y := cmedia.o
Line 10: snd-hda-codec-cmedia-y := cmedia.o (duplicate)
Line 24: obj-$(CONFIG_SND_HDA_CODEC_CMEDIA) += snd-hda-codec-cmedia.o
Line 29: obj-$(CONFIG_SND_HDA_CODEC_CMEDIA) += snd-hda-codec-cmedia.o (duplicate)
This file was created by commit 6014e9021b ("ALSA: hda: Move codec
drivers into sound/hda/codecs directory") which
moved codec drivers from sound/pci/hda/ to sound/hda/codecs/. In that
initial file, cmedia appeared once in each section.
Immediately after, commit aeeb85f26c ("ALSA: hda: Split Realtek
HD-audio codec driver") reordered the entries and
inserted cmedia at new positions near the top of each section, as part
of splitting out the Realtek driver. However, the original cmedia entries
were not removed during this reordering, creating duplicates of both
lines. The second assignment harmlessly overwrites the first with the
same value, and the second obj-* line causes the module to be listed
twice — neither causes a build failure, but both are dead code.
Remove the duplicate entries (second occurrence of each).
Assisted-by: Claude:claude-opus-4-6 kconfiglint
Signed-off-by: Sasha Levin <sashal@kernel.org>
Link: https://patch.msgid.link/20260426000327.56079-1-sashal@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The mic-mute LED on the Acer Aspire A315-44P (subsystem ID 0x10251640)
does not light up when the microphone is muted. The LED is connected to
GPIO3 of the Realtek ALC256 codec.
Add a quirk entry using ALC256_FIXUP_ACER_SFG16_MICMUTE_LED, which
configures GPIO3 (bitmask 0x04) as the micmute LED, identical to
the Acer Swift SFG16.
Tested by manually sending HDA verb commands directly to the codec
and verifying that GPIO3 drives the LED while GPIO1 and GPIO2
do not.
Signed-off-by: Naser Al-Asbahi <nasserqahtan0@gmail.com>
Link: https://patch.msgid.link/20260425154014.83982-1-nasserqahtan0@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The arch_local_irq_*() wrappers in <asm/irqflags.h> dispatch between two
underlying primitives: the __daif_* path on most systems, and the
__pmr_* path on builds that use GIC PMR-based masking (Pseudo-NMI). The
leaf primitives are already __always_inline, but the wrappers themselves
are plain "static inline".
That is unsafe for noinstr callers: nothing prevents the compiler from
emitting an out-of-line copy of e.g. arch_local_irq_disable(), and an
out-of-line copy can be instrumented (ftrace, kcov, sanitizers), which
breaks the noinstr contract on the entry/idle paths that rely on these
helpers.
x86 hit and fixed exactly this class of bug in commit 7a745be1cc
("x86/entry: __always_inline irqflags for noinstr").
Force-inline all of the arch_local_irq_*() wrappers so they cannot be
emitted out-of-line:
- arch_local_irq_enable()
- arch_local_irq_disable()
- arch_local_save_flags()
- arch_irqs_disabled_flags()
- arch_irqs_disabled()
- arch_local_irq_save()
- arch_local_irq_restore()
The primary motivation is noinstr safety. There is a useful side effect
for fleet-wide profiling: when the wrapper is emitted out-of-line,
samples taken inside it during the post-WFI IRQ unmask in
default_idle_call() are attributed to arch_local_irq_enable rather than
default_idle_call(), and the FP-unwinder loses default_idle_call() from
the chain.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Leonardo Bras <leo.bras@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
On ThinkBook 16p systems the platform mute LED is present and
bound to the audio-mute trigger, but it does not react to Master
mute changes.
The affected fixup chain sets up the DAC routing, but does not enable
vmaster mute LED handling. Because of that, the generic HDA code does
not mark Master Playback Switch with SNDRV_CTL_ELEM_ACCESS_SPK_LED,
and the audio-mute trigger never receives speaker mute updates.
Add a ThinkBook-specific wrapper around alc287_fixup_bind_dacs() and
enable spec->gen.vmaster_mute_led during PRE_PROBE. This keeps the
existing DAC binding logic unchanged while allowing the normal generic
LED path to drive the mute LED.
Signed-off-by: Yuxuan Qiu <yuxuanqiu596@gmail.com>
Link: https://patch.msgid.link/20260424112107.22206-1-yuxuanqiu596@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The dma_sync_single_for_device() function expects a dma_addr_t, but
iommu_pages_flush_incoherent() was incorrectly passing a virtual
address.
Since iommu_pages_start_incoherent() enforces a 1:1 mapping between
DMA addresses and physical addresses (checked via WARN_ON), we can
convert the virtual address to a physical address before passing it to
the DMA API.
This also matches the behaviour of the other non-x86 in
iommu_pages_free_incoherent(), which uses virt_to_phys(virt);
Fixes: 36ae67b139 ("iommu/pages: Add support for incoherent IOMMU page table walkers")
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The UAC3 cluster descriptor length check in
snd_usb_get_audioformat_uac3()was added to
make sure that the buffer is large enough for
a struct uac3_cluster_header_descriptor before the
returned data is cast and used.
However, the check uses sizeof(cluster), where cluster
is a pointer, not the size of the descriptor header.
This makes the validation depend on the architecture
pointer size and does not match the intended object size.
Check against sizeof(*cluster) instead.
Fixes: fb4e2a6e8f ("ALSA: usb-audio: Fix out-of-bounds read in snd_usb_get_audioformat_uac3()")
Cc: stable@vger.kernel.org
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260424-alsa-usb-uac3-cluster-size-v1-1-99a5808898a3@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
loopback_check_format() may stop the capture side when playback starts
with parameters that no longer match a running capture stream. Commit
826af7fa62 ("ALSA: aloop: Fix racy access at PCM trigger") moved
the peer lookup under cable->lock, but the actual snd_pcm_stop() still
runs after dropping that lock.
A concurrent close can clear the capture entry from cable->streams[] and
detach or free its runtime while the playback trigger path still holds a
stale peer substream pointer.
Keep a per-cable count of in-flight peer stops before dropping
cable->lock, and make free_cable() wait for those stops before
detaching the runtime. This preserves the existing behavior while
making the peer runtime lifetime explicit.
Reported-by: syzbot+8fa95c41eafbc9d2ff6f@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=8fa95c41eafbc9d2ff6f
Fixes: 597603d615 ("ALSA: introduce the snd-aloop module for the PCM loopback")
Cc: stable@vger.kernel.org
Suggested-by: Takashi Iwai <tiwai@suse.com>
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260424-alsa-aloop-peer-stop-uaf-v2-1-94e68101db8a@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Currently the runtime.oss.trigger field may be accessed concurrently
without protection, which may lead to the data race. And, in this
case, it may lead to more severe problem because it's a bit field; as
writing the data, it may overwrite other bit fields as well, which
confuses the operation completely, as spotted by fuzzing.
Fix it by covering runtime.oss.trigger bit fled also with the existing
params_lock mutex in both snd_pcm_oss_get_trigger() and
snd_pcm_oss_poll().
Reported-and-tested-by: Jaeyoung Chung <jjy600901@snu.ac.kr>
Closes: https://lore.kernel.org/20260423145330.210035-1-jjy600901@snu.ac.kr
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20260424112205.123703-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Due to CVE-2023-20585, the PPR log buffer must use the maximum supported
size (512K) on Genoa (Family 0x19, model >= 0x10) systems when SNP is
enabled, to mitigate a potential security vulnerability. Note that Family
0x19 models below 0x10 (Milan) do not support PPR when SNP is enabled.
Hence the PPR log size increase is only applied for model >= 0x10.
All other systems continue to use the default PPR log buffer size (8K).
Apply the errata fix by making the following changes:
- Introduce global new variable (amd_iommu_pprlog_size) to have PPR log buffer
size. Adjust variable size for Genoa family.
- Extend 'amd_iommu_apply_erratum_snp()' to also set the PPR log buffer
size to maximum for Family 0x19 model >= 0x10 when SNP is enabled.
- Rename PPR_* macros to make it more readable.
Link: https://www.amd.com/en/resources/product-security/bulletin/amd-sb-3016.html
Cc: Borislav Petkov <bp@alien8.de>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Tested-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Due to CVE-2023-20585, the Event log buffer must use the maximum supported
size (512K) on Milan/Genoa (Family 0x19) systems when SNP is enabled,
to mitigate a potential security vulnerability. All other systems continue to
use the default Event log buffer size (8K).
Apply the errata fix by making the following changes:
* Introduce new global variable (amd_iommu_evtlog_size) to have event log
buffer size. Adjust variable size for family 0x19.
* Since 'iommu_snp_enable()' must be called after the core IOMMU subsystem
is initialized, it cannot be moved to the early init stage. The SNP errata
must also be applied after the 'iommu_snp_enable()' check. Therefore,
'alloc_event_buffer()' and 'iommu_enable_event_buffer()' are now called
in the IOMMU_ENABLED state, after the errata is applied.
* Adjust alloc_event_buffer() and iommu_enable_event_buffer() to handle
all IOMMU instances.
* Also rename EVT_* macros to make it more readable.
Link: https://www.amd.com/en/resources/product-security/bulletin/amd-sb-3016.html
Cc: Borislav Petkov <bp@alien8.de>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Tested-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
cs35l56_hda_mixer_get() ignores regmap_read() and
cs35l56_hda_mixer_put() ignores regmap_update_bits_check().
This makes the ASP TX source controls report success when a regmap
access fails. The write path returns no change instead of an error,
and the read path continues after a failed read instead of aborting
the control callback.
Propagate the regmap errors, matching the posture and volume controls
in this driver.
Fixes: 73cfbfa9ca ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier")
Cc: stable@vger.kernel.org
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260423-alsa-cs35l56-asp-tx-source-errors-v1-1-17ea7c62ec31@gmail.com
The expression (*opcode++ << 24) and exp * code_alignment_factor
may overflow signed int and becomes negative.
Fix this by casting each byte to u64 before shifting. Also fix
the misaligned break statement while we are here.
Example of the result can be seen here:
Link: https://godbolt.org/z/zhY8d3595
It maybe not a real problem, but could be a issue in future.
Fixes: d499e9627d ("arm64/scs: Fix handling of advance_loc4")
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The original link is no longer valid. Replace it with the official
PDF of the 2nd edition. The new link points to the exact 2nd edition
that the existing comment in isofs.rst refers to.
Signed-off-by: Ziran Zhang <zhangcoder@yeah.net>
Link: https://patch.msgid.link/20260425142943.6809-1-zhangcoder@yeah.net
Signed-off-by: Jan Kara <jack@suse.cz>
ieee80211_invoke_fast_rx() is documented as safe for parallel RX, but
its per-invocation rx_result is declared static. Concurrent callers then
share one instance and can overwrite each other's result between
ieee80211_rx_mesh_data() and the switch on res.
That can make a packet that was queued or consumed by
ieee80211_rx_mesh_data() fall through into ieee80211_rx_8023(), or make
a packet that should continue return as queued.
Make res an automatic variable so each invocation keeps its own result.
Fixes: 3468e1e0c6 ("wifi: mac80211: add mesh fast-rx support")
Cc: stable@vger.kernel.org
Signed-off-by: Catherine <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260424131435.83212-2-enderaoelyther@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
__ieee80211_rx_handle_packet() resolves the link via
ieee80211_rx_data_set_link() on the pubsta->mlo path but ignores the
helper's return value. Inside the helper,
rx->link = rcu_dereference(rx->sdata->link[link_id]);
can leave rx->link NULL if link_id references a slot already cleared
by ieee80211_vif_set_links() during station-initiated ML
reconfiguration (see mlme.c's ieee80211_ml_reconfiguration(), which
invalidates sdata->link[] before the matching
ieee80211_sta_remove_link() loop walks the link-sta hash). RX dispatch
still resolves a link_sta from the hash and then drops into
ieee80211_prepare_and_rx_handle(), which dereferences link->conf->addr.
Every other user site of ieee80211_rx_data_set_link() checks the return
and bails on failure; only this branch did not. Mirror the safe
pattern.
Fixes: e66b7920aa ("wifi: mac80211: fix initialization of rx->link and rx->link_sta")
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Link: https://patch.msgid.link/20260422000651.4184602-1-michael.bommarito@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
NL80211_CMD_SET_PMK and NL80211_CMD_DEL_PMK manage the offloaded
4-way-handshake PMK state used by drivers advertising
NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X. The only in-tree
driver that wires up both ->set_pmk / ->del_pmk and advertises
the feature today is brcmfmac, so the practical reach of this
patch is narrow.
Both ops were introduced without a .flags gate, so the generic
netlink layer dispatches them to an unprivileged caller instead
of rejecting with -EPERM at the permission check. Every other
connection-state op in the adjacent block (CONNECT, ASSOCIATE,
AUTHENTICATE, SET_KEY, ...) carries GENL_UNS_ADMIN_PERM; SET_PMK
/ DEL_PMK were introduced without the flag in 2017 and left
unchanged by later refactors. Johannes checked the original
Intel submission history and confirmed there is no admin check
in any prior revision either, so this seems likely to be a
simple oversight rather than an intentional carve-out.
Require GENL_UNS_ADMIN_PERM so the genl layer performs the same
capable(CAP_NET_ADMIN) check as its siblings. wpa_supplicant
already needs CAP_NET_ADMIN for every other nl80211 op it issues,
so supplicant operation is unaffected. The worst case the missing
gate enables today is an unprivileged local process on a
multi-user system invalidating the offloaded PMK state of another
user's 4-way-handshake session, forcing a full EAP re-auth on the
next reconnect.
Verified in UML: an unprivileged probe (uid=1000) sees
SET_MULTICAST_TO_UNICAST (sibling op with GENL_UNS_ADMIN_PERM)
return -EPERM on both pre- and post-fix kernels, while SET_PMK /
DEL_PMK return -ENODEV from nl80211_pre_doit()'s wdev lookup pre-
fix (proving dispatch crossed the genl permission check) and
-EPERM post-fix (rejected at the genl layer as intended).
Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Fixes: 3a00df5707 ("cfg80211: support 4-way handshake offloading for 802.1X")
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom>
Link: https://patch.msgid.link/20260421224552.4044147-1-michael.bommarito@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The existing validation only checks if recvlength exceeds
LBS_CMD_BUFFER_SIZE, but doesn't check the lower bound. When a
USB device sends a response shorter than MESSAGE_HEADER_LEN, the
subtraction (recvlength - MESSAGE_HEADER_LEN) wraps to a huge
value, causing memcpy to corrupt the heap.
Add the same lower bound check that libertas_tf already has.
Signed-off-by: Amir Mohammad Jahangirzad <a.jahangirzad@gmail.com>
Link: https://patch.msgid.link/20260418004247.368944-1-a.jahangirzad@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Same fix as b43: the firmware-controlled key index in b43legacy_rx()
can exceed dev->max_nr_keys. The existing B43legacy_WARN_ON is
non-enforcing in production builds, allowing an out-of-bounds read of
dev->key[].
Make the check enforcing by dropping the frame for invalid indices.
Fixes: 75388acd0c ("[B43LEGACY]: add mac80211-based driver for legacy BCM43xx devices")
Cc: stable@vger.kernel.org
Signed-off-by: Tristan Madani <tristan@talencesecurity.com>
Link: https://patch.msgid.link/20260417111145.2694196-2-tristmd@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The firmware-controlled key index in b43_rx() can exceed the dev->key[]
array size (58 entries). The existing B43_WARN_ON is non-enforcing in
production builds, allowing an out-of-bounds read.
Make the B43_WARN_ON check enforcing by dropping the frame when the
firmware returns an invalid key index.
Suggested-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Michael Büsch <m@bues.ch>
Fixes: e4d6b79518 ("[B43]: add mac80211-based driver for modern BCM43xx devices")
Cc: stable@vger.kernel.org
Signed-off-by: Tristan Madani <tristan@talencesecurity.com>
Link: https://patch.msgid.link/20260417111145.2694196-1-tristmd@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Watchdog task might end between send_sig() and kthread_stop() calls, what
results in the use-after-free issue. Fix this by increasing watchdog task
reference count before calling send_sig() and dropping it by switching to
kthread_stop_put().
Cc: stable@vger.kernel.org
Fixes: 373c83a801 ("brcmfmac: stop watchdog before detach and free everything")
Fixes: a9ffda88be ("brcm80211: fmac: abstract bus_stop interface function pointer")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260416093339.2066829-1-m.szyprowski@samsung.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Some Xfinity XB8 firmware advertises >1 spatial stream MCS indexes in
their basic HT-MCS set. On cards with lower spatial streams, the check
would fail, and we'd be stuck with no HT when in fact work fine with its
own supported rate. This change makes it so the check is only performed
in strict mode.
Fixes: 574faa0e93 ("wifi: mac80211: add HT and VHT basic set verification")
Signed-off-by: Rio Liu <rio@r26.me>
Link: https://patch.msgid.link/99Mv9QEceyPrQhSP52MtAVmz0_kWJmzqotJjD9YW6LGLqk-AZloAueUyHCURilFkuqOh6Ecv8i2KKdSE1ujP3AnbU5QEouVisT1w_V3xdfc=@r26.me
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
My Outlook email address often sends emails from kernel devs to the junk
folder. Also, emails from some addresses (eg suse.de) are not received
at all. Update the email to my alternate Proton Mail address.
Signed-off-by: Aditya Garg <gargaditya08@proton.me>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260424175846.15103-1-gargaditya08@proton.me
Driver core expects devices to be dynamically allocated and will, for
example, complain loudly when no release function has been provided.
Use root_device_register() to allocate and register the root device
instead of open coding using a static device.
Note that this also fixes a reference leak in the unlikely event that
device_register() ever fails.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Fix a typo of "RGB332" in kerneldoc for the drm_crtc_fill_palette_332()
helper.
Fixes: 7ff61177b7 ("drm/color-mgmt: Prepare for RGB332 palettes")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/c413e45c8f752a532a4ff377f7a8b9eaab4a082a.1776757681.git.geert+renesas@glider.be
This driver is attached to a ~2000x80 screen, which is a lot more than
a single page. This causes out of memory errors in some rare cases.
Reported-by: soopyc <cassie@soopy.moe>
Closes: https://github.com/t2linux/fedora/issues/51
Signed-off-by: Sasha Finkelstein <k@chaosmail.tech>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Aditya Garg <gargaditya08@live.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 0670c2f56e ("drm/tiny: add driver for Apple Touch Bars in x86 Macs")
Cc: <stable@vger.kernel.org> # v6.15+
Link: https://patch.msgid.link/20260420-x86-tb-vmalloc-v1-1-7757ff657223@chaosmail.tech
xfs_trans_alloc_icreate() can fail with ENOSPC when delalloc
reservations have consumed most of the available block count
(fdblocks). xfs_trans_alloc() already retries internally with
xfs_blockgc_flush_all(), but that only trims post-EOF speculative
preallocation and may not free enough space for the transaction
reservation.
Add a retry with xfs_flush_inodes() when xfs_trans_alloc() returns
ENOSPC. This forces writeback of all dirty inodes via
sync_inodes_sb(), converting delalloc reservations to real
allocations and freeing the over-reserved portion back to fdblocks.
This fixes all callers of xfs_trans_alloc_icreate() and removes
the existing caller-level retry from xfs_create(), which is now
handled centrally.
Signed-off-by: Ravi Singh <ravising@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
display_get_pci_dev_of() gets a referenced PCI device via
pci_get_device(). Drop that reference when pci_enable_device() fails and
release it during the managed teardown path after pci_disable_device().
Without that, ofdrm leaks the pci_dev reference on both the error path
and the normal cleanup path.
Fixes: c8a17756c4 ("drm/ofdrm: Add ofdrm for Open Firmware framebuffers")
Co-developed-by: Myeonghun Pak <mhun512@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Co-developed-by: Taegyu Kim <tmk5904@psu.edu>
Signed-off-by: Taegyu Kim <tmk5904@psu.edu>
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260420002513.216-1-dbgh9129@gmail.com
