drm_gem_fb_init_with_funcs() computes sub-sampled plane dimensions
using plain integer division:
unsigned int width = mode_cmd->width / (i ? info->hsub : 1);
unsigned int height = mode_cmd->height / (i ? info->vsub : 1);
However, the ioctl-level framebuffer_check() in drm_framebuffer.c uses
drm_format_info_plane_width/height() which round up dimensions via
DIV_ROUND_UP(). This inconsistency corrupts the subsequent GEM object
size check for certain pixel format and dimension combinations.
For example, with NV12 (vsub=2) and a 1-pixel-tall framebuffer the
GEM size validation path sees height=0 instead of height=1. The
expression (height - 1) then wraps to UINT_MAX as an unsigned int,
causing min_size to overflow and wrap back to a small value. A tiny
GEM object therefore passes the size guard, yet when the GPU accesses
the chroma plane it will read or write memory beyond the object's
bounds.
Fix by replacing the open-coded divisions with drm_format_info_plane_width()
and drm_format_info_plane_height(), which use DIV_ROUND_UP() and match
the calculation already used in framebuffer_check().
Fixes: 4c3dbb2c31 ("drm: Add GEM backed framebuffer library")
Cc: stable@vger.kernel.org # v4.14+
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Ashutosh Desai <ashutoshdesai993@gmail.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260420013637.457751-1-ashutoshdesai993@gmail.com
Store SMT register cache per bank instead of using a single array.
On RZ/V2H(P), RZ/V2N, and RZ/G3E, the SMT register is split across two
32-bit registers: bits 0/8/16/24 control pins 0-3, while pins 4-7 are
controlled by the corresponding bits in the next register. The previous
implementation cached only a single SMT register, leading to incomplete
save/restore of SMT state.
Convert cache->smt to a per-bank array and allocate storage for both
halves. Update suspend/resume handling to save and restore both SMT
registers when present.
Fixes: 837afa592c ("pinctrl: renesas: rzg2l: Add suspend/resume support for Schmitt control registers")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260413182456.811543-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
When saving/restoring pull-up/down register state during suspend/resume,
the second PUPD register access was incorrectly using the same base offset
as the first, effectively reading/writing the same register twice instead
of the adjacent one.
Add the correct + 4 byte offset to the second RZG2L_PCTRL_REG_ACCESS32
call so that pupd[1][port] is properly saved and restored from the next
32-bit register in the PUPD register pair, covering pins 4–7 of ports
with 4 or more pins.
Fixes: b2bd65fbb6 ("pinctrl: renesas: rzg2l: Add suspend/resume support for pull up/down")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260328090548.84124-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The current implementation of aisb calculation will erroneously index
via an unsigned long * as well as multiply by 8B for every 64-bits in
the offset; only one or the other is required. This throws off aisb
calculations once the number of devices exceeds 64, and can result
in out-of-bounds access as well as failure to indicate summary bits
associated with those devices in guests.
Fix this by converting to a physical address before applying the
offset, as is already done in arch/s390/pci/pci_irq.c.
Fixes: 3c5a1b6f0a ("KVM: s390: pci: provide routines for enabling/disabling interrupt forwarding")
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
The renesas,rzv2h-usb2phy-reset binding schema defines #mux-state-cells
as a required property. Add it to the usb20phyrst node to fix the
following warnings:
arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk.dtb: usb20phy-reset@15830000 (renesas,r9a09g056-usb2phy-reset): '#mux-state-cells' is a required property
arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk-cn15-emmc.dtb: usb20phy-reset@15830000 (renesas,r9a09g056-usb2phy-reset): '#mux-state-cells' is a required property
arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk-cn15-sd.dtb: usb20phy-reset@15830000 (renesas,r9a09g056-usb2phy-reset): '#mux-state-cells' is a required property
Fixes: 6a1b6f7e56 ("dt-bindings: reset: renesas,rzv2h-usb2phy: Add '#mux-state-cells' property")
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/31210e05f7189b466b30eedbdda3d11726dac279.1775575276.git.tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The renesas,rzv2h-usb2phy-reset binding schema defines #mux-state-cells
as a required property. Add it to the usb20phyrst and usb21phyrst nodes
to fix the following warnings:
arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dtb: usb20phy-reset@15830000 (renesas,r9a09g057-usb2phy-reset): '#mux-state-cells' is a required property
arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dtb: usb21phy-reset@15840000 (renesas,r9a09g057-usb2phy-reset): '#mux-state-cells' is a required property
arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk-cn15-emmc.dtb: usb20phy-reset@15830000 (renesas,r9a09g057-usb2phy-reset): '#mux-state-cells' is a required property
arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk-cn15-emmc.dtb: usb21phy-reset@15840000 (renesas,r9a09g057-usb2phy-reset): '#mux-state-cells' is a required property
arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk-cn15-sd.dtb: usb20phy-reset@15830000 (renesas,r9a09g057-usb2phy-reset): '#mux-state-cells' is a required property
arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk-cn15-sd.dtb: usb21phy-reset@15840000 (renesas,r9a09g057-usb2phy-reset): '#mux-state-cells' is a required property
Fixes: 6a1b6f7e56 ("dt-bindings: reset: renesas,rzv2h-usb2phy: Add '#mux-state-cells' property")
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/22fb9a500cdbc3272dc23cd5e36bca5fbbec75fc.1775575276.git.tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add missing unit address to bus node to fix the following DTC W=1
warning:
arch/arm/boot/dts/renesas/r7s72100.dtsi:40.11-46.4: Warning (unit_address_vs_reg): /bus: node has a reg or ranges property, but no unit name
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260327234244.91707-5-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add missing unit address to bus node to fix the following DTC W=1
warning:
arch/arm/boot/dts/renesas/r8a7792.dtsi:89.12-94.4: Warning (unit_address_vs_reg): /bus: node has a reg or ranges property, but no unit name
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260327234244.91707-4-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add missing unit address to bus node to fix the following DTC W=1
warning:
arch/arm/boot/dts/renesas/r8a7779.dtsi:707.12-712.4: Warning (unit_address_vs_reg): /bus: node has a reg or ranges property, but no unit name
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260327234244.91707-3-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add missing unit address to bus node to fix the following DTC W=1
warning:
arch/arm/boot/dts/renesas/r8a7778.dtsi:43.12-48.4: Warning (unit_address_vs_reg): /bus: node has a reg or ranges property, but no unit name
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260327234244.91707-2-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add missing cells and reg DT property in the DU subnode to fix the
following DTC W=1 warning:
arch/arm64/boot/dts/renesas/rz-smarc-du-adv7513.dtsi:29.10-33.5: Warning (unit_address_vs_reg): /fragment@1/__overlay__/ports/port@0: node has a unit name, but no reg or ranges property
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260326042411.215241-5-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add missing cells and reg DT property in the CSI2 subnode to fix the
following DTC W=1 warning:
arch/arm64/boot/dts/renesas/rz-smarc-cru-csi-ov5645.dtsi:49.10-55.5: Warning (unit_address_vs_reg): /fragment@2/__overlay__/ports/port@0: node has a unit name, but no reg or ranges property
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patch.msgid.link/20260326042411.215241-4-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add missing cells and reg DT property in the Salvator-X panel DTO to fix
the following DTC W=1 warning:
arch/arm64/boot/dts/renesas/salvator-panel-aa104xd12.dtso:30.10-34.5: Warning (unit_address_vs_reg): /fragment@2/__overlay__/ports/port@1: node has a unit name, but no reg or ranges property
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260326042411.215241-3-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add missing cells and reg DT property in the Draak/Ebisu panel DTO to
fix the following DTC W=1 warning:
arch/arm64/boot/dts/renesas/draak-ebisu-panel-aa104xd12.dtso:30.10-34.5: Warning (unit_address_vs_reg): /fragment@2/__overlay__/ports/port@1: node has a unit name, but no reg or ranges property
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260326042411.215241-2-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The da node block header (xfs_da3_node_hdr) contains a __pad32 field
that should always be zero. Add a check for this during directory and
attribute btree scrubbing.
Since old kernels may have written non-zero padding without issues, flag
this as an optimization opportunity (preen) rather than corruption.
Signed-off-by: Yuto Ohnuki <ytohnuki@amazon.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
In xfs_zone_gc_mount(), on error, a struct xfs_zone_gc_data allocated
with xfs_zone_gc_data_alloc() is freed with kfree(), however, this
doesn't free the underlying folios or the rmap_irecs.
Use xfs_zone_gc_data_free() to correctly free this memory.
Fixes: 080d01c41d ("xfs: implement zoned garbage collection")
Cc: stable@vger.kernel.org # v6.15
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Currently, the 0th index of the zi_used_bucket_bitmap array is not freed
on error due to the pre-decrement then evaluate semantic of the while
loop used in xfs_alloc_zone_info(). Fix it by allowing for the i == 0
case to be covered.
Fixes: 080d01c41d ("xfs: implement zoned garbage collection")
Cc: stable@vger.kernel.org # v6.15
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Add the missing scrub check for the pad field in directory data block
headers. Old kernels may have written non-zero padding without issue,
and the write path now self-heals stale padding on modification. Flag
non-zero padding as an optimization opportunity (preen) rather than
corruption.
Add xchk_fblock_set_preen helper for reporting file fork block issues
that could be optimized. The trace event xchk_fblock_preen already
exists.
Signed-off-by: Yuto Ohnuki <ytohnuki@amazon.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Old kernels did not zero the pad field in xfs_dir3_data_hdr when
initializing directory data blocks, so existing filesystems may have
non-zero padding on disk.
Zero the pad field in xfs_dir3_data_write_verify alongside the existing
LSN and checksum updates. The pad field is pure alignment padding with
no runtime meaning, so zeroing it during write verification is safe and
has no additional I/O cost. This lets filesystems gradually self-heal
stale non-zero padding as directories are modified, without requiring an
explicit repair pass.
Suggested-by: Dave Chinner <dgc@kernel.org>
Signed-off-by: Yuto Ohnuki <ytohnuki@amazon.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
xfs_dir3_data_init currently zeroes only the xfs_dir3_blk_hdr portion of
the directory data block header, then manually initializes the bestfree
entries in a loop. This leaves the pad field in xfs_dir3_data_hdr
uninitialized and requires explicit zeroing of each bestfree slot.
Zero the entire header region (geo->data_entry_offset bytes)
unconditionally before setting individual fields. This covers all
current and future header fields, all padding (implicit and explicit),
and the bestfree array, so the manual zeroing loop for bestfree can be
removed.
Suggested-by: Dave Chinner <dgc@kernel.org>
Signed-off-by: Yuto Ohnuki <ytohnuki@amazon.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
In xfs_refcount_finish_one(), there's no need to pass
XFS_ALLOC_FLAG_FREEING to xfs_alloc_read_agf().
So remove it.
Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
The qcom pinctrl core supports marking functions that represent GPIO mode
via PINCTRL_GPIO_PINFUNCTION(), so that strict pinmuxing does not reject
GPIO requests for pins that are muxed to the GPIO function.
ipq4019 still describes its gpio function with QCA_PIN_FUNCTION(gpio),
so it is not treated as a GPIO pin function. As a result, GPIO consumers
can still conflict with pinctrl states that select the "gpio" function.
Add a QCA_GPIO_PIN_FUNCTION() helper and use it for the ipq4019 gpio
function, matching how the msm-based qcom drivers handle this.
This allows ipq4019 to keep the GPIO-related pin configuration in DTS
without tripping over strict pinmux ownership checks.
Fixes: cc85cb96e2 ("pinctrl: qcom: make the pinmuxing strict")
Signed-off-by: Til Kaiser <mail@tk154.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
If the gpio_chip::get_direction() callback is not implemented by the GPIO
controller driver, GPIOLIB emits a warning.
Implement get_direction() for the GPIO part of pinctrl-moore.
Fixes: 471e998c0e ("gpiolib: remove redundant callback check")
Fixes: e623c4303e ("gpiolib: sanitize the return value of gpio_chip::get_direction()")
Reported-by: Frank Wunderlich <frank-w@public-files.de>
Closes: https://lore.kernel.org/all/20260409132724.126258-1-linux@fw-web.de/
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Tested-By: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Renames types across all KVM selftests to more closely align with types used
in the kernel:
vm_vaddr_t -> gva_t
vm_paddr_t -> gpa_t
uint64_t -> u64
uint32_t -> u32
uint16_t -> u16
uint8_t -> u8
int64_t -> s64
int32_t -> s32
int16_t -> s16
int8_t -> s8
Using the kernel's preferred types eliminates a source of friction for many
contributors, as the majority of KVM selftests contributions come from kernel
developers. The kernel names are also shorter, which allows for more concise
code, and in any many cases eliminates newlines thanks to shorter types and
parameter names.
Rename variables and parameters as well as types, e.g. gpa instead of paddr,
to again align with the kernel, and in a few cases to remove ambiguity, e.g.
where paddr is used to refer to a _host_ physical address.
-----BEGIN PGP SIGNATURE-----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=nYWK
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-selftests_kernel_types-7.1' of https://github.com/kvm-x86/linux into HEAD
KVM selftests type renames for 7.1
Renames types across all KVM selftests to more closely align with types used
in the kernel:
vm_vaddr_t -> gva_t
vm_paddr_t -> gpa_t
uint64_t -> u64
uint32_t -> u32
uint16_t -> u16
uint8_t -> u8
int64_t -> s64
int32_t -> s32
int16_t -> s16
int8_t -> s8
Using the kernel's preferred types eliminates a source of friction for many
contributors, as the majority of KVM selftests contributions come from kernel
developers. The kernel names are also shorter, which allows for more concise
code, and in any many cases eliminates newlines thanks to shorter types and
parameter names.
Rename variables and parameters as well as types, e.g. gpa instead of paddr,
to again align with the kernel, and in a few cases to remove ambiguity, e.g.
where paddr is used to refer to a _host_ physical address.
- Allow tracing for non-pKVM, which was accidentally disabled when
the series was merged
- Rationalise the way the pKVM hypercall ranges are defined by using
the same mechanism as already used for the vcpu_sysreg enum
- Enforce that SMCCC function numbers relayed by the pKVM proxy are
actually compliant with the specification
- Fix a couple of feature to idreg mappings which resulted in the
wrong sanitisation being applied
- Fix the GICD_IIDR revision number field that could never been
written correctly by userspace
- Make kvm_vcpu_initialized() correctly use its parameter instead
of relying on the surrounding context
- Enforce correct ordering in __pkvm_init_vcpu(), plugging a
potential pin leak at the same time
- Move __pkvm_init_finalise() to a less dangerous spot, avoiding
future problems
- Restore functional userspace irqchip support after a four year
breakage (last functional kernel was 5.18...). This is obviously
ripe for garbage collection.
- ... and the usual lot of spelling fixes
-----BEGIN PGP SIGNATURE-----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=p/JR
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 7.1, take #1
- Allow tracing for non-pKVM, which was accidentally disabled when
the series was merged
- Rationalise the way the pKVM hypercall ranges are defined by using
the same mechanism as already used for the vcpu_sysreg enum
- Enforce that SMCCC function numbers relayed by the pKVM proxy are
actually compliant with the specification
- Fix a couple of feature to idreg mappings which resulted in the
wrong sanitisation being applied
- Fix the GICD_IIDR revision number field that could never been
written correctly by userspace
- Make kvm_vcpu_initialized() correctly use its parameter instead
of relying on the surrounding context
- Enforce correct ordering in __pkvm_init_vcpu(), plugging a
potential pin leak at the same time
- Move __pkvm_init_finalise() to a less dangerous spot, avoiding
future problems
- Restore functional userspace irqchip support after a four year
breakage (last functional kernel was 5.18...). This is obviously
ripe for garbage collection.
- ... and the usual lot of spelling fixes
Define check_steal_time_uapi() for LoongArch so that the steal_time test
builds. Note, while LoongArch's steal_time_init() has some funky asserts,
none of the code is uniquely verifying KVM's uAPI.
Cc: Jiakai Xu <xujiakai2025@iscas.ac.cn>
Cc: Jiakai Xu <jiakaiPeanut@gmail.com>
Cc: Andrew Jones <andrew.jones@oss.qualcomm.com>
Cc: Anup Patel <anup@brainfault.org>
Cc: Tianrui Zhao <zhaotianrui@loongson.cn>
Cc: Bibo Mao <maobibo@loongson.cn>
Cc: Huacai Chen <chenhuacai@kernel.org>
Fixes: 40351ed924 ("KVM: selftests: Refactor UAPI tests into dedicated function")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260420192644.3892050-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On UP kernels (!CONFIG_SMP), spin_trylock() is a no-op that
unconditionally succeeds even when the lock is already held. As a
result, kmalloc_nolock() called from NMI context can re-enter the slab
allocator and acquire n->list_lock that the interrupted context is
already holding, corrupting slab state.
With CONFIG_DEBUG_SPINLOCK on UP, the following BUG is triggered with
the slub_kunit test module:
BUG: spinlock trylock failure on UP on CPU#0, kunit_try_catch/243
[...]
Call Trace:
<NMI>
dump_stack_lvl+0x3f/0x60
do_raw_spin_trylock+0x41/0x50
_raw_spin_trylock+0x24/0x50
get_from_partial_node+0x120/0x4d0
___slab_alloc+0x8a/0x4c0
kmalloc_nolock_noprof+0x164/0x310
[...]
</NMI>
Fix this by returning NULL early when invoked from NMI on a UP kernel.
Link: https://lore.kernel.org/linux-mm/ad_cqe51pvr1WaDg@hyeyoo
Cc: stable@vger.kernel.org
Fixes: af92793e52 ("slab: Introduce kmalloc_nolock() and kfree_nolock().")
Signed-off-by: Harry Yoo (Oracle) <harry@kernel.org>
Link: https://patch.msgid.link/20260427-nolock-api-fix-v2-2-a6b83a92d9a4@kernel.org
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
On UP kernels (!CONFIG_SMP), spin_trylock() is a no-op that
unconditionally succeeds even when the lock is already held. As a
result, alloc_frozen_pages_nolock() called from NMI context can
re-enter rmqueue() and acquire the zone lock that the interrupted
context is already holding, corrupting the freelists.
With CONFIG_DEBUG_SPINLOCK on UP, the following BUG is triggered with
the slub_kunit test module:
BUG: spinlock trylock failure on UP on CPU#0, kunit_try_catch/243
[...]
Call Trace:
<NMI>
dump_stack_lvl+0x3f/0x60
do_raw_spin_trylock+0x41/0x50
_raw_spin_trylock+0x24/0x50
rmqueue.isra.0+0x2a9/0xa70
get_page_from_freelist+0xeb/0x450
alloc_frozen_pages_nolock_noprof+0x111/0x1e0
allocate_slab+0x42a/0x500
___slab_alloc+0xa7/0x4c0
kmalloc_nolock_noprof+0x164/0x310
[...]
</NMI>
Fix this by returning NULL early when invoked from NMI on a UP kernel.
Link: https://lore.kernel.org/linux-mm/ad_cqe51pvr1WaDg@hyeyoo
Cc: stable@vger.kernel.org
Fixes: d7242af864 ("mm: Introduce alloc_frozen_pages_nolock()")
Signed-off-by: Harry Yoo (Oracle) <harry@kernel.org>
Link: https://patch.msgid.link/20260427-nolock-api-fix-v2-1-a6b83a92d9a4@kernel.org
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
clang-22 warns about csiphy_match_clock_name() taking a variable format
string that is not checked against the 'int index' argument:
drivers/media/platform/qcom/camss/camss-csiphy.c:566:44: error: diagnostic behavior may be improved by
adding the 'format(printf, 2, 3)' attribute to the declaration of 'csiphy_match_clock_name'
[-Werror,-Wmissing-format-attribute]
561 | static bool csiphy_match_clock_name(const char *clock_name, const char *format,
| __attribute__((format(printf, 2, 3)))
562 | int index)
563 | {
564 | char name[16]; /* csiphyXXX_timer\0 */
565 |
566 | snprintf(name, sizeof(name), format, index);
| ^
drivers/media/platform/qcom/camss/camss-csiphy.c:561:13: note: 'csiphy_match_clock_name' declared here
561 | static bool csiphy_match_clock_name(const char *clock_name, const char *format,
| ^
Change the function to use a snprintf() style format string that allows this
to be checked at the call site.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add missing required clocks (cpas_ahb and camnoc_axi) for VFE lite
instances on sa8775p platform. These clocks are necessary for proper
VFE lite operation:
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
Fixes: e7b59e1d06 ("media: qcom: camss: Add support for VFE 690")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Fix the mismatch between clock list and clock rate table for CSID lite
instances. The current implementation has 5 clocks defined but only 2
are actually needed (vfe_lite_csid and vfe_lite_cphy_rx), while the
clock rate table doesn't match this configuration.
Update both clock list and rate table to maintain consistency:
- Remove unused clocks: cpas_vfe_lite, vfe_lite_ahb, vfe_lite
- Update clock rate table to match the remaining two clocks
Signed-off-by: Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Fixes: ed03e99de0 ("media: qcom: camss: Add support for CSID 690")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Fix BUF_DONE_IRQ_STATUS_RDI_OFFSET calculation for csid lite on
sa8775p platform. The offset should be 0 for csid lite on sa8775p,
Signed-off-by: Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Fixes: ed03e99de0 ("media: qcom: camss: Add support for CSID 690")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Follow the commit bfe1326573 ("venus: Fix for H265 decoding failure.")
and increase H265D_MAX_SLICE following firmware requirements on that
platform. Otherwise decoding of the H.265 streams fails with the
"insufficient scratch_1 buffer size" from the firmware.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
[bod: Fixed commit log withthe => with the]
Fixes: e1f5d32608 ("media: iris: Add internal buffer calculation for HEVC and VP9 decoders")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
During concurrency testing, multiple instances can run in parallel, and
each instance uses its own inst->lock while the core->lock protects the
list of active instances. The race happens because these locks cover
different scopes, inst->lock protects only the internals of a single
instance, while the Macro Blocks Per Frame (MBPF) checker walks the
core list under core->lock and reads fields like fmt_src->width and
fmt_src->height. At the same time, iris_close() may free fmt_src and
fmt_dst under inst->lock while the instance is still present in the core
list. This allows a situation where the MBPF checker, still iterating
through the core list, reaches an instance whose fmt_src was already
freed by another thread and ends up dereferencing a dangling pointer,
resulting in a use-after-free. This happens because the MBPF checker
assumes that any instance in the core list is fully valid, but the
freeing of fmt_src and fmt_dst without removing the instance from the
core list is not correct.
The correct ordering is to defer freeing fmt_src and fmt_dst until after
the instance has been removed from the core list and all teardown under
the core lock has completed, ensuring that no dangling pointers are ever
exposed during MBPF checks.
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Signed-off-by: Vishnu Reddy <busanna.reddy@oss.qualcomm.com>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Fixes: 5ad964ad56 ("media: iris: Initialize and deinitialize encoder instance structure")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Currently the driver switches the vcodec GDSC to hardware (HW) mode
before firmware load and boot sequence. GDSC can be powered off, keeping
in hw mode, thereby the vcodec registers programmed in TrustZone (TZ)
carry default (reset) values.
Move the transition to HW mode after firmware load and boot sequence.
The bug was exposed with driver configuring different stream ids to
different devices via iommu-map. With registers carrying reset values,
VPU would not generate desired stream-id, thereby leading to SMMU fault.
For vpu4, when GDSC is switched to HW mode, there is a need to perform
the reset operation. Without reset, there are occasional issues of
register corruption observed. Hence the vpu GDSC switch also involves
the reset.
Co-developed-by: Vishnu Reddy <busanna.reddy@oss.qualcomm.com>
Signed-off-by: Vishnu Reddy <busanna.reddy@oss.qualcomm.com>
Signed-off-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
[bod: occassional => occasional]
Fixes: dde659d370 ("media: iris: Introduce vpu ops for vpu4 with necessary hooks")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The core->iface_q_table_vaddr buffer is alloc'd with size queue_size
but freed with sizeof(*q_tbl_hdr) which is different.
Change the dma_free_attrs() size.
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Fixes: d7378f84e9 ("media: iris: introduce iris core state management with shared queues")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The recent change in commit 1dabf00ee2 ("media: iris: gen1: Destroy
internal buffers after FW releases") introduced a regression where
session_release_buf() may free the buffer. The caller,
iris_release_internal_buffers(), continued to access `buffer` after the
call, leading to a potential use-after-free.
Fix this by setting BUF_ATTR_PENDING_RELEASE before calling
session_release_buf(), and reverting the flag if the call fails. This
ensures no dereference occurs after potential freeing.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Closes: https://lore.kernel.org/lkml/aYXvKAX3Pg3sL37P@stanley.mountain/#r
Signed-off-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Fixes: 1dabf00ee2 ("media: iris: gen1: Destroy internal buffers after FW releases")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
When build-testined with CONFIG_QCOM_MDT_LOADER=m and VIDEO_QCOM_IRIS=y,
the kernel fails to link:
x86_64-linux-ld: drivers/media/platform/qcom/iris/iris_firmware.o: in function `iris_fw_load':
iris_firmware.c:(.text+0xb0): undefined reference to `qcom_mdt_get_size'
iris_firmware.c:(.text+0xfd): undefined reference to `qcom_mdt_load'
The problem is the conditional 'select' statement. Change this to
make the driver built-in here regardless of CONFIG_ARCH_QCOM.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Fixes: d19b163356 ("media: iris: implement video firmware load/unload")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
When build-testined with CONFIG_QCOM_MDT_LOADER=m and VIDEO_QCOM_VENUS=y,
the kernel fails to link:
x86_64-linux-ld: drivers/media/platform/qcom/venus/firmware.o: in function `venus_boot':
firmware.c:(.text+0x1e3): undefined reference to `qcom_mdt_get_size'
firmware.c:(.text+0x25a): undefined reference to `qcom_mdt_load'
firmware.c:(.text+0x272): undefined reference to `qcom_mdt_load_no_init'
The problem is the conditional 'select' statement. Change this to
make the driver built-in here regardless of CONFIG_ARCH_QCOM,
same as for the similar IRIS driver.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Fixes: 0399b696f7 ("media: venus: fix compile-test build on non-qcom ARM platform")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
xpadone_process_packet() receives len directly from urb->actual_length
and uses it to index the share-button byte at data[len - 18] or
data[len - 26]. Since both len and data[0] are under the device's
control, a broken controller can send a GIP_CMD_INPUT packet with
actual_length < 18 (e.g. 5 bytes) and reach this code path, causing
accesses beyond the actual array.
Fix this by calculating the offset and checking bounds against the
packet length.
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: 4ef4636707 ("Input: xpad - fix Share button on Xbox One controllers")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
nexio_read_data() pulls data_len and x_len from a packed __be16 header
in the device's interrupt packet and then walks packet->data[0..x_len)
and packet->data[x_len..data_len) comparing each byte against a
threshold.
Both fields are 16-bit on the wire (max 65535). The existing
adjustments shave at most 0x100 / 0x80 off, so the loop bound can still
reach roughly 0xfeff. The URB transfer buffer for NEXIO is rept_size
(1024) bytes from usb_alloc_coherent(), with the first 7 occupied by the
packed header — so packet->data[] has 1017 valid bytes. read_data()
callbacks are not given urb->actual_length, and nothing else bounds the
walk.
A device that lies about its length can get a ~64 KiB out-of-bounds read
past the coherent DMA allocation. The first index whose byte exceeds
NEXIO_THRESHOLD lands in begin_x / begin_y and from there into the
reported touch coordinates, so adjacent kernel memory contents leak to
userspace as ABS_X / ABS_Y events. Far enough out, the read can also
hit an unmapped page and fault.
Fix this all by clamping data_len to the buffer's data[] capacity and
x_len to data_len.
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fixes: 5197424cdc ("Input: usbtouchscreen - add NEXIO (or iNexio) support")
Cc: stable <stable@kernel.org>
Assisted-by: gkh_clanker_t1000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2026042026-chlorine-epidermis-fd6d@gregkh
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Commit abdb1742a3 ("cifs: get rid of mount options string parsing")
removed the last caller.
Signed-off-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
When leases are disabled on the server, running xfstest generic/309 leads
to an error because GET_DIR_DELEGATION returns EINVAL.
nfsd_get_dir_deleg() can fail in several ways: like memory allocation and
unable to get a lease because either leases are disable or it's already
held. Currently only the condition "already held" is translated to
returning directory-delegation-is-unavailable error. However, other failure
conditions are likely temporary and thus should result in the same kind
of error.
Fixes: 8b99f6a8c1 ("nfsd: wire up GET_DIR_DELEGATION handling")
Cc: stable@vger.kernel.org
Signed-off-by: Olga Kornievskaia <okorniev@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The nouveau mailing list has some issues (e.g. with stripping Cc entries
from replies when using notmuch + b4 based workflows).
Besides that, having a separate mailing list for nova also helps to
better distinguish nova from nouveau and makes it easier to track
nova-specific discussions.
Replace the nouveau mailing list with the new nova-gpu@lists.linux.dev
mailing list for both nova-core and nova-drm, and remove the patchwork
entries, since those are bound to the nouveau mailing list and not used
by nova anyway.
Link: https://lore.kernel.org/all/bc2517c2-6772-4cbd-8fd7-6dbdcdd13eab@nvidia.com/
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20260423124649.38793-1-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
ARef is defined in sync and is getting used from types causing the
build to fail.
Fix this by using ARef from sync module.
Fixes: 80df573af9 ("rust: drm: gem: shmem: Add DRM shmem helper abstraction")
Signed-off-by: Mukesh Kumar Chaurasiya (IBM) <mkchauras@gmail.com>
Link: https://patch.msgid.link/20260426094725.2188668-2-mkchauras@gmail.com
[ Add missing Fixes: tag. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
