Currently, the bindings of this multi-lane SerDes are such that
consumers specify the lane index in the PHY cell, and the lane itself is
not described in the device tree.
It is desirable to describe individual Lynx 28G SerDes lanes in the
device tree, in order to be able to customize electrical properties such
as those in Documentation/devicetree/bindings/phy/transmit-amplitude.yaml
(or others).
If each lane may have an OF node, it appears natural for consumers to
have their "phys" phandle point to that OF node.
The problem is that transitioning between one format and another is a
breaking change. The bindings of the 28G Lynx SerDes can themselves be
extended in a backward-compatible way, but the consumers cannot be
modified without breaking them.
Namely, if we have:
&mac {
phys = <&serdes1 0>;
};
we cannot update the device tree to:
&mac {
phys = <&serdes1_lane_0>;
};
because old kernels cannot resolve this phandle to a valid PHY.
The proposal here is to keep tolerating existing device trees, which are
not supposed to be changed, but modify lynx_28g_xlate() to also resolve
the new format with #phy-cells = <0> in the lanes.
This way we support 3 modes:
- Legacy device trees, no OF nodes for lanes
- New device trees, OF nodes for lanes and "phys" phandle points towards
them
- Hybrid device trees, OF nodes for lanes (to describe electrical
parameters), but "phys" phandle points towards the SerDes top-level
provider
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251125114847.804961-4-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This simplifies the main control flow a little bit and makes the logic
reusable for probing the lanes with OF nodes if those exist.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251125114847.804961-3-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Josua Mayer requested to have OF nodes for each lane, so that he
(and other board developers) can further describe electrical parameters
individually.
For this use case, we need a container node to apply the already
existing Documentation/devicetree/bindings/phy/transmit-amplitude.yaml,
plus whatever other schemas might get standardized for TX equalization
parameters, polarity inversion etc.
When lane OF nodes exist, these are also PHY providers ("phys" phandles
can point directly to them). Compare that to the existing binding, where
the PHY provider is the top-level SerDes node, and the second cell in
the "phys" phandle specifies the lane index.
The new binding format overlaps over the old one without interfering,
but there is a caveat:
Existing device trees, which already have "phys = <&serdes1 0>" cannot
be converted to "phys = <&serdes_1_lane_a>", because in doing so, we
would break compatibility with old kernels which don't understand how to
translate the latter phandle to a PHY.
The transition to the new phandle format can be performed only after a
reasonable amount of time has elapsed after this schema change and the
corresponding driver change have been backported to stable kernels.
However, the aforementioned transition is not strictly necessary, and
the "hybrid" description (where individual lanes have their own OF node,
but are not pointed to by the "phys" phandle) can remain for an
indefinite amount of time, even if a little inelegant.
For newly introduced device trees, where there are no compatibility
concerns with old kernels to speak of, it is strongly recommended to use
the "phys = <&serdes_1_lane_a>" format. The same holds for phandles
towards lanes of LX2160A SerDes #3, which at the time of writing is not
yet described in fsl-lx2160a.dtsi, so there is no legacy to maintain.
To avoid the strange situation where we have a "phy" (SerDes node) ->
"phy" (lane node) hierarchy, let's rename the expected name of the
top-level node to "serdes", and update the example too. This has a
theoretical chance of causing regressions if bootloaders search for
hardcoded paths rather than using aliases, but to the best of my
knowledge, for LX2160A/LX2162A this is not the case.
Link: https://lore.kernel.org/lkml/02270f62-9334-400c-b7b9-7e6a44dbbfc9@solid-run.com/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251125114847.804961-2-vladimir.oltean@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Update phy driver to enable SS combo phy for this SoC. New registers'
definitions, phy ops (init/exit), and dedicated phy driver data
structure are added for SS combo phy. Add these changes in the driver
to support SS combo phy for this SoC.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Pritam Manohar Sutar <pritam.sutar@samsung.com>
Link: https://patch.msgid.link/20251124110453.2887437-7-pritam.sutar@samsung.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The USBDRD31 5nm controller consists of Synopsys USB20 femptoPhy and
USB31 SSP+ combophy. Document support for the USB31 SSP+ phy found on
combophy of the ExynosAutov920 SoC.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Pritam Manohar Sutar <pritam.sutar@samsung.com>
Link: https://patch.msgid.link/20251124110453.2887437-6-pritam.sutar@samsung.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Support UTMI+ combo phy for this SoC, which is somewhat similar to
what the existing Exynos850 supports. The difference is that some
register offsets and bit fields are different from Exynos850.
Add required change in phy driver to support combo HS phy for this SoC.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Pritam Manohar Sutar <pritam.sutar@samsung.com>
Link: https://patch.msgid.link/20251124110453.2887437-5-pritam.sutar@samsung.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The USBDRD31 5nm controller consists of Synopsys USB2.0 femptophy and
USBSS combophy. Add-on USB20 femptophy is required to support USB20 data
rates along with USBSS phy. Document support for the USB2.0 femptophy
found on combophy of the this SoC.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Pritam Manohar Sutar <pritam.sutar@samsung.com>
Link: https://patch.msgid.link/20251124110453.2887437-4-pritam.sutar@samsung.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Enable UTMI+ phy support for this SoC which is very similar to what
the existing Exynos850 supports.
Add required change in phy driver to support HS phy for this SoC.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Pritam Manohar Sutar <pritam.sutar@samsung.com>
Link: https://patch.msgid.link/20251124110453.2887437-3-pritam.sutar@samsung.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Document support for the USB20 phy found on the ExynosAutov920 SoC. The
USB20 phy is functionally identical to that on the Exynos850 SoC, so no
driver changes are needed to support this phy. However, add a dedicated
compatible string for USB20 phy found in this SoC.
This phy needs 0.75v, 0.18v and 3.3v supplies for its internal
functionally. Power Supply's names are as per phy's User Data-Book.
These names, (dvdd, vdd18 and vdd33), are considered for 0.75v, 1.8v
and 3.3v respectively.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Pritam Manohar Sutar <pritam.sutar@samsung.com>
Link: https://patch.msgid.link/20251124110453.2887437-2-pritam.sutar@samsung.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The Apple Type-C PHY (ATCPHY) is a PHY for USB 2.0, USB 3.x,
USB4/Thunderbolt, and DisplayPort connectivity found in Apple Silicon SoCs.
The PHY handles muxing between these different protocols and also provides
the reset controller for the attached dwc3 USB controller.
There is no documentation available for this PHY and the entire sequence
of MMIO pokes has been figured out by tracing all MMIO access of Apple's
driver under a thin hypervisor and correlating the register reads/writes
to their kernel's debug output to find their names. Deviations from this
sequence generally results in the port not working or, especially when
the mode is switched to USB4 or Thunderbolt, to some watchdog resetting
the entire SoC.
This initial commit already introduces support for Display Port and
USB4/Thunderbolt but the drivers for these are not ready. We cannot
control the alternate mode negotiation and are stuck with whatever Apple's
firmware decides such that any DisplayPort or USB4/Thunderbolt device will
result in a correctly setup PHY but not be usable until the other drivers
are upstreamed as well.
Co-developed-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
Co-developed-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> # for reset controller
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://patch.msgid.link/20251214-b4-atcphy-v3-3-ba82b20e9459@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Apple's Type-C PHY (ATCPHY) is a PHY for USB 2.0, USB 3.x,
USB4/Thunderbolt, and DisplayPort connectivity found in Apple Silicon
SoCs.
The PHY handles muxing between these different protocols and also provides
the reset controller for the attached dwc3 USB controller.
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://patch.msgid.link/20251214-b4-atcphy-v3-2-ba82b20e9459@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Various hardware, like the Type-C PHY or the Thunderbolt/USB4 NHI,
present on Apple SoCs need machine-specific tunables passed from our
bootloader m1n1 to the device tree. Add generic helpers so that we
don't have to duplicate this across multiple drivers.
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Janne Grunau <j@jannau.net>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://patch.msgid.link/20251214-b4-atcphy-v3-1-ba82b20e9459@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add QCS615-specific configuration for USB/DP PHY, including DP init
routines, voltage swing tables, and platform data. Add compatible
"qcs615-qmp-usb3-dp-phy".
Note: SW_PORTSELECT handling for orientation flip is not implemented
due to QCS615 fixed-orientation design and non-standard lane mapping.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Xiangxu Yin <xiangxu.yin@oss.qualcomm.com>
Link: https://patch.msgid.link/20251215-add-displayport-support-for-qcs615-platform-v8-12-cbc72c88a44e@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When both USB and DP PHY modes are enabled simultaneously on the same
QMP USBC PHY, it can lead to hardware misconfiguration and undefined
behavior. This happens because the PHY resources are not designed to
operate in both modes at the same time.
To prevent this, introduce a mutual exclusion check between USB and DP
PHY modes.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Xiangxu Yin <xiangxu.yin@oss.qualcomm.com>
Link: https://patch.msgid.link/20251215-add-displayport-support-for-qcs615-platform-v8-10-cbc72c88a44e@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The current implementation programs USB-specific registers in
qmp_usbc_com_init(), which is shared by both USB and DP modes. This
causes unnecessary configuration when the PHY is used for DP.
Move USB-only register setup from com_init to qmp_usbc_usb_power_on,
so it runs only for USB mode.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Xiangxu Yin <xiangxu.yin@oss.qualcomm.com>
Link: https://patch.msgid.link/20251215-add-displayport-support-for-qcs615-platform-v8-7-cbc72c88a44e@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
USB3DP PHY requires link and vco_div clocks when operating in DP mode.
Extend qmp_usbc_register_clocks and the clock provider logic to register
these clocks along with the existing pipe clock, to support both USB and
DP configurations.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Xiangxu Yin <xiangxu.yin@oss.qualcomm.com>
Link: https://patch.msgid.link/20251215-add-displayport-support-for-qcs615-platform-v8-6-cbc72c88a44e@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The original reset list only works for USB-only PHYs. USB3DP PHYs require
different reset names such as "dp_phy", so they need a separate list.
Moving reset configuration into qmp_phy_cfg allows per-PHY customization
without adding special-case logic in DT parsing. The legacy DT path keeps
using the old hardcoded list, while non-legacy paths use cfg->reset_list.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Xiangxu Yin <xiangxu.yin@oss.qualcomm.com>
Link: https://patch.msgid.link/20251215-add-displayport-support-for-qcs615-platform-v8-5-cbc72c88a44e@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
QMP USBC PHY drivers previously did not set init_load_uA for regulators,
which could result in incorrect vote levels. This patch introduces
regulator definitions with proper init_load_uA values based on each
chip's power grid design.
QCS615 USB3 PHY was previously reusing qcm2290_usb3phy_cfg, but its
regulator requirements differ. A new qcs615_usb3phy_cfg is added to
reflect the correct settings.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Xiangxu Yin <xiangxu.yin@oss.qualcomm.com>
Link: https://patch.msgid.link/20251215-add-displayport-support-for-qcs615-platform-v8-4-cbc72c88a44e@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Extend qmp_usbc_offsets and qmp_phy_cfg with DP-specific fields,
including register offsets, init tables, and callback hooks. Also
update qmp_usbc struct to track DP-related resources and state.
This enables support for USB/DP switchable Type-C PHYs that operate
in either mode.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Xiangxu Yin <xiangxu.yin@oss.qualcomm.com>
Link: https://patch.msgid.link/20251215-add-displayport-support-for-qcs615-platform-v8-3-cbc72c88a44e@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
To support following DisplayPort (DP) mode over the Type-C PHY, rename
USB-specific functions and ops to clearly separate them from common or
DP-related logic.
This is a preparatory cleanup to enable USB + DP dual mode.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Xiangxu Yin <xiangxu.yin@oss.qualcomm.com>
Link: https://patch.msgid.link/20251215-add-displayport-support-for-qcs615-platform-v8-2-cbc72c88a44e@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add device tree binding documentation for the Qualcomm QMP USB3+DP PHY
on QCS615 Platform. This PHY supports both USB3 and DP functionality
over USB-C, with PHY mode switching capability. It does not support
combo mode.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Xiangxu Yin <xiangxu.yin@oss.qualcomm.com>
Link: https://patch.msgid.link/20251215-add-displayport-support-for-qcs615-platform-v8-1-cbc72c88a44e@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Document the TI TCAN1046 automotive CAN transceiver. The TCAN1046 is a
dual high-speed CAN transceiver with sleep-mode support and no EN pin,
mirroring the behaviour of the NXP TJA1048, which also provides dual
channels and STB1/2 sleep-control lines.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251209162119.2038313-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Set the regulator load before enabling the regulators to ensure stable
operation and proper power management on platforms where regulators are
shared between the QMP USB PHY and other IP blocks.
Introduce a regulator data structure with explicit enable load values and
use the regulator framework's `init_load_uA` field along with
`devm_regulator_bulk_get_const()` to ensure that `regulator_set_load()` is
applied automatically before the first enable, providing consistent power
management behavior across platforms.
Signed-off-by: Faisal Hassan <faisal.hassan@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20250905101243.14815-1-faisal.hassan@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add QMP PCIe PHY support for the Kaanapali platform.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20251124-kaanapali-pcie-phy-v4-5-d04ee9cca83b@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Some qserdes-com register offsets for the v8 PHY were previously omitted,
as they were not needed by earlier v8 PHY initialization sequences. Add
these missing v8 register offsets now required to support PCIe QMP PHY on
Kaanapali platform.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
Link: https://patch.msgid.link/20251124-kaanapali-pcie-phy-v4-4-d04ee9cca83b@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Kaanapali SoC uses QMP phy with version v8 for PCIe Gen3 x2. Add the new
PCS PCIE specific offsets in a dedicated header file.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
Link: https://patch.msgid.link/20251124-kaanapali-pcie-phy-v4-3-d04ee9cca83b@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Kaanapali SoC uses QMP PHY with version v8 for PCIe Gen3 x2, but requires
a completely unique qserdes-txrx register offsets compared to existing v8
offsets.
Hence, add a dedicated header file containing the FULL SET of qserdes-txrx
register definitions required for Kaanapali's PCIe PHY operation.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
Link: https://patch.msgid.link/20251124-kaanapali-pcie-phy-v4-2-d04ee9cca83b@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Introduce a driver that supports three PHYs found on the SpacemiT
K1 SoC. The first PHY is a combo PHY that can be configured for
use for either USB 3 or PCIe. The other two PHYs support PCIe
only.
All three PHYs must be programmed with an 8 bit receiver termination
value, which must be determined dynamically. Only the combo PHY is
able to determine this value. The combo PHY performs a special
calibration step at probe time to discover this, and that value is
used to program each PHY that operates in PCIe mode. The combo
PHY must therefore be probed before either of the PCIe-only PHYs
will be used.
Each PHY has an internal PLL driven from an external oscillator.
This PLL started when the PHY is first initialized, and stays
on thereafter.
During normal operation, the USB or PCIe driver using the PHY must
ensure (other) clocks and resets are set up properly.
However PCIe mode clocks are enabled and resets are de-asserted
temporarily by this driver to perform the calibration step on the
combo PHY.
Tested-by: Junzhong Pan <panjunzhong@linux.spacemit.com>
Signed-off-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/all/ba532f8d-a452-40e5-af46-b58b89f70a92@linaro.org/ [1]
Tested-by: Yixun Lan <dlan@gentoo.org>
Link: https://patch.msgid.link/20251218151235.454997-4-elder@riscstar.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add the Device Tree binding for the PCIe/USB 3.0 combo PHY found in
the SpacemiT K1 SoC. This is one of three PCIe PHYs, and is unusual
in that only the combo PHY can perform a calibration step needed to
determine settings used by the other two PCIe PHYs.
Calibration must be done with the combo PHY in PCIe mode, and to allow
this to occur independent of the eventual use for the PHY (PCIe or USB)
some PCIe-related properties must be supplied: clocks; resets; and a
syscon phandle.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Alex Elder <elder@riscstar.com>
Link: https://lore.kernel.org/all/ba532f8d-a452-40e5-af46-b58b89f70a92@linaro.org/ [1]
Tested-by: Yixun Lan <dlan@gentoo.org>
Link: https://patch.msgid.link/20251218151235.454997-2-elder@riscstar.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
MT8195's HDMI PHY block has 4 clocks instead of just a single one.
Describe the extra clocks for it.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
[Louis-Alexis Eyraud: addressed feedback from mailing list]
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251217-mtk-genio-evk-hdmi-support-v2-3-a994976bb39a@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add compatible string for the HDMI PHY IP on MT8188 SoC, that is
compatible with the one found on MT8195 SoC.
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251217-mtk-genio-evk-hdmi-support-v2-2-a994976bb39a@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
For all of the HDMI PHYs compatible with the one found on MT8195
the output clock has a different datasheet name and specifically
it is called "hdmi_txpll", differently from the older HDMI PHYs
which output block is called "hdmitx_dig_cts".
Replace clock output name string check by max item number one to allow
the new name on all of the HDMI PHY IPs that are perfectly compatible
with MT8195.
[Louis-Alexis Eyraud: split patch, addressed previous feedback from
mailing list, and reworded description]
Fixes: c78fe548b0 ("dt-bindings: phy: mediatek: hdmi-phy: Add mt8195 compatible")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Link: https://patch.msgid.link/20251217-mtk-genio-evk-hdmi-support-v2-1-a994976bb39a@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Drop a bunch of unused members from struct ropll_config and make the
static ropll_tmds_cfg table more readable:
* add a table header
* sort rows by rate
* convert hex values to decimal (for consistency)
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20251221-phy-hdptx-pll-fix-v2-2-ae4abf7f75a1@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Attempting to make use of a 1080p@120Hz display mode with 10 bpc RGB on
my Acer XV275K P3 monitor results in a blank image. A similar behavior
has been reported on Philips 279M1RV.
The faulty modeline is created by drm_gtf_mode_complex() based on the
following EDID entry from the Standard Timings block:
GTF: 1920x1080 119.999987 Hz 16:9 138.840 kHz 368.759000 MHz
It's worth noting the computed pixel clock ends up being slightly higher
at 368.881000 MHz. Nevertheless, this seems to work consistently fine
with 8 bpc RGB.
After switching to 10 bpc, the TMDS character rate expected for the mode
increases to 461.101250 MHz, as per drm_hdmi_compute_mode_clock().
Since there is no entry for this rate in the ropll_tmds_cfg table, the
necessary HDMI PLL configuration parameters are calculated dynamically
by rk_hdptx_phy_clk_pll_calc(). However, the resulting output rate is
not quite a perfect match, i.e. 461.100000 MHz. That proved to be the
actual root cause of the problem.
Add a new entry to the TMDS configuration table and provide the
necessary frequency division coefficients for the PHY PLL to generate
the expected 461.101250 MHz output.
Fixes: 9d0ec51d7c ("phy: rockchip: samsung-hdptx: Add high color depth management")
Tested-by: Derek Foreman <derek.foreman@collabora.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20251221-phy-hdptx-pll-fix-v2-1-ae4abf7f75a1@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
According to IC engineer suggestion, set ssc_range as -4003 ppm
will have more tolerance for EMI, and suitable for more boards.
Besides, it's confirmed that with this setting the TX SSC test
will pass on one customer board.
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251219081354.3806806-1-xu.yang_2@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The PHY core defines phy_pm_runtime_put() to return an int, but that
return value is never used. It also passes the return value of
pm_runtime_put() to the caller which is not very useful.
Returning an error code from pm_runtime_put() merely means that it has
not queued up a work item to check whether or not the device can be
suspended and there are many perfectly valid situations in which that
can happen, like after writing "on" to the devices' runtime PM "control"
attribute in sysfs for one example.
Modify phy_pm_runtime_put() to discard the pm_runtime_put() return
value and change its return type to void. Also drop the redundant
pm_runtime_enabled() call from there.
No intentional functional impact.
This will facilitate a planned change of the pm_runtime_put() return
type to void in the future.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2556645.jE0xQCEvom@rafael.j.wysocki
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Passing pm_runtime_put() return value to the callers is not particularly
useful.
Returning an error code from pm_runtime_put() merely means that it has
not queued up a work item to check whether or not the device can be
suspended and there are many perfectly valid situations in which that
can happen, like after writing "on" to the devices' runtime PM "control"
attribute in sysfs for one example. It also happens when the kernel is
configured with CONFIG_PM unset.
Accordingly, update samsung_mipi_dcphy_exit() to simply discard the
return value of pm_runtime_put() and always return success to the
caller.
This will facilitate a planned change of the pm_runtime_put() return
type to void in the future.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2281919.Icojqenx9y@rafael.j.wysocki
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Printing error messages on pm_runtime_put() returning negative values
is not particularly useful.
Returning an error code from pm_runtime_put() merely means that it has
not queued up a work item to check whether or not the device can be
suspended and there are many perfectly valid situations in which that
can happen, like after writing "on" to the devices' runtime PM "control"
attribute in sysfs for one example.
Accordingly, update mixel_lvds_phy_reset() to simply discard the return
value of pm_runtime_put().
This will facilitate a planned change of the pm_runtime_put() return
type to void in the future.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2012926.taCxCBeP46@rafael.j.wysocki
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add compatibles for the USB3.0 PHY used in the RZ/V2H(P) and RZ/V2N SoCs.
These SoCs integrate the same USB3 PHY IP block as the RZ/G3E, so the
RZ/G3E compatible is used as a fallback for both.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://patch.msgid.link/20251222161846.152952-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When the OTG USB port is used to power to SoC, configured as peripheral and
used in gadget mode, communication stops without notice about 6 seconds
after the gadget is configured and enumerated.
The problem was observed on a Radxa Rock Pi S board, which can only be
powered by the only USB-C connector. That connector is the only one usable
in gadget mode. This implies the USB cable is connected from before boot
and never disconnects while the kernel runs.
The related code flow in the PHY driver code can be summarized as:
* the first time chg_detect_work starts (6 seconds after gadget is
configured and enumerated)
-> rockchip_chg_detect_work():
if chg_state is UNDEFINED:
property_enable(base, &rphy->phy_cfg->chg_det.opmode, false); [Y]
* rockchip_chg_detect_work() changes state and re-triggers itself a few
times until it reaches the DETECTED state:
-> rockchip_chg_detect_work():
if chg_state is DETECTED:
property_enable(base, &rphy->phy_cfg->chg_det.opmode, true); [Z]
At [Y] all existing communications stop. E.g. using a CDC serial gadget,
the /dev/tty* devices are still present on both host and device, but no
data is transferred anymore. The later call with a 'true' argument at [Z]
does not restore it.
Due to the lack of documentation, what chg_det.opmode does exactly is not
clear, however by code inspection it seems reasonable that is disables
something needed to keep the communication working, and testing proves that
disabling these lines lets gadget mode keep working. So prevent changes to
chg_det.opmode when there is a cable connected (VBUS present).
Fixes: 98898f3bc8 ("phy: rockchip-inno-usb2: support otg-port for rk3399")
Cc: stable@vger.kernel.org
Closes: https://lore.kernel.org/lkml/20250414185458.7767aabc@booty/
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251127-rk3308-fix-usb-gadget-phy-disconnect-v2-2-dac8a02cd2ca@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When the OTG USB port is used to power the SoC, configured as peripheral
and used in gadget mode, there is a disconnection about 6 seconds after the
gadget is configured and enumerated.
The problem was observed on a Radxa Rock Pi S board, which can only be
powered by the only USB-C connector. That connector is the only one usable
in gadget mode. This implies the USB cable is connected from before boot
and never disconnects while the kernel runs.
The problem happens because of the PHY driver code flow, summarized as:
* UDC start code (triggered via configfs at any time after boot)
-> phy_init
-> rockchip_usb2phy_init
-> schedule_delayed_work(otg_sm_work [A], 6 sec)
-> phy_power_on
-> rockchip_usb2phy_power_on
-> enable clock
-> rockchip_usb2phy_reset
* Now the gadget interface is up and running.
* 6 seconds later otg_sm_work starts [A]
-> rockchip_usb2phy_otg_sm_work():
if (B_IDLE state && VBUS present && ...):
schedule_delayed_work(&rport->chg_work [B], 0);
* immediately the chg_detect_work starts [B]
-> rockchip_chg_detect_work():
if chg_state is UNDEFINED:
if (!rport->suspended):
rockchip_usb2phy_power_off() <--- [X]
At [X], the PHY is powered off, causing a disconnection. This quickly
triggers a new connection and following re-enumeration, but any connection
that had been established during the 6 seconds is broken.
The code already checks for !rport->suspended (which, somewhat
counter-intuitively, means the PHY is powered on), so add a guard for VBUS
as well to avoid a disconnection when a cable is connected.
Fixes: 98898f3bc8 ("phy: rockchip-inno-usb2: support otg-port for rk3399")
Cc: stable@vger.kernel.org
Closes: https://lore.kernel.org/lkml/20250414185458.7767aabc@booty/
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Co-developed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20251127-rk3308-fix-usb-gadget-phy-disconnect-v2-1-dac8a02cd2ca@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The mmio regmap that may be allocated during probe is never freed.
Switch to using the device managed allocator so that the regmap is
released on probe failures (e.g. probe deferral) and on driver unbind.
Fixes: 5ab90f4012 ("phy: ti: gmii-sel: Do not use syscon helper to build regmap")
Cc: stable@vger.kernel.org # 6.14
Cc: Andrew Davis <afd@ti.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Andrew Davis <afd@ti.com>
Link: https://patch.msgid.link/20251127134834.2030-1-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
