Add handling for the ASoC jack API to SDCA to allow user-space to be
hooked up normally.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251215153650.3913117-3-ckeepax@opensource.cirrus.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The jack code is perhaps a bit large for being in the interrupt
code directly. Improve the encapsulation by factoring out the
jack handling code into a new c file, as is already done for HID
and FDL. Whilst doing so also add a jack_state structure to hold
the jack state for improved expandability in the future.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251215153650.3913117-2-ckeepax@opensource.cirrus.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The A523 has four SPI controllers. One of them supports MIPI DBI mode
in addition to standard SPI.
Compared to older generations, this newer controller now has a combined
counter for the RX FIFO ad buffer levels. In older generations, the
RX buffer level was a separate bitfield in the FIFO status register.
In practice this difference is negligible. The buffer is mostly
invisible to the implementation. If programmed I/O transfers are limited
to the FIFO size, then the contents of the buffer seem to always be
flushed over to the FIFO. For DMA, the DRQ trigger levels are only tied
to the FIFO levels. In all other aspects, the controller is the same as
the one in the R329.
Support the standard SPI mode controllers using the settings for R329.
DBI is left out as there currently is no infrastructure for enabling a
DBI host controller, as was the case for the R329.
Also fold the entry for the R329 to make the style consistent.
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251221110513.1850535-3-wens@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The A523 has four SPI controllers. One of them supports MIPI DBI mode
in addition to standard SPI.
Compared to older generations, this newer controller now has a combined
counter for the RX FIFO ad buffer levels. In older generations, the
RX buffer level was a separate bitfield in the FIFO status register.
In practice this difference is negligible. The buffer is mostly
invisible to the implementation. If programmed I/O transfers are limited
to the FIFO size, then the contents of the buffer seem to always be
flushed over to the FIFO. For DMA, the DRQ trigger levels are only tied
to the FIFO levels. In all other aspects, the controller is the same as
the one in the R329.
Add new compatible strings for the new controllers.
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251221110513.1850535-2-wens@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Using libc types and headers from the UAPI headers is problematic as it
introduces a dependency on a full C toolchain.
Use the fixed-width integer type provided by the UAPI headers instead.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://patch.msgid.link/20251222-uapi-regulator-v1-1-a71c66eb1a94@linutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
We need to distinguish the topologies with and without BT PCM.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20251219034937.3630569-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SSP BT mask bits overlapped with SOC_SDW_CODEC_SPKR,
SOC_SDW_SIDECAR_AMPS, and SOC_SDW_CODEC_MIC BIT[15–17] in
sdw_utils.h. Shift the SSP BT mask bits to a higher range to
eliminate the conflict.
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20251219034902.3630537-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit ef56081d18 ("RDMA/bnxt_re: RoCE related hardware counters
update") added three new counters and placed them after
BNXT_RE_OUT_OF_SEQ_ERR.
BNXT_RE_OUT_OF_SEQ_ERR acts as a boundary marker for allocating hardware
statistics with different num_counters values on chip_gen_p5_p7 devices.
As a result, BNXT_RE_NUM_STD_COUNTERS are used when allocating
hw_stats, which leads to an out-of-bounds write in
bnxt_re_copy_err_stats().
The counters BNXT_RE_REQ_CQE_ERROR, BNXT_RE_RESP_CQE_ERROR, and
BNXT_RE_RESP_REMOTE_ACCESS_ERRS are applicable to generic hardware, not
only p5/p7 devices.
Fix this by moving these counters before BNXT_RE_OUT_OF_SEQ_ERR so they
are included in the generic counter set.
Fixes: ef56081d18 ("RDMA/bnxt_re: RoCE related hardware counters update")
Reported-by: Yingying Zheng <zhengyingying@sangfor.com.cn>
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Link: https://patch.msgid.link/20251208072110.28874-1-dinghui@sangfor.com.cn
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Tested-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The pwm.c driver already uses pwm_ops::apply. This item was completed
in commit 832ce36f44 ("staging: greybus: introduce pwm_ops::apply")
but never removed from the TODO list.
Removed the outdated TODO item.
Signed-off-by: Sammy Malik <sammy@parkour.is>
Link: https://patch.msgid.link/20251220135613.226912-1-sammy@parkour.is
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The variable fixId violates the kernel coding style, which prefers
snake_case for variable names. Rename it to fix_id to match the
standard style.
This is a coding style change only.
Signed-off-by: Tim Wassink <timwassink.dev@gmail.com>
Link: https://patch.msgid.link/20251221153102.38178-1-timwassink.dev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit c6e126de43 ("of: Keep track of populated platform
devices") child devices will not be created by of_platform_populate()
if the devices had previously been deregistered individually so that the
OF_POPULATED flag is still set in the corresponding OF nodes.
Switch to using of_platform_depopulate() instead of open coding so that
the child devices are created if the driver is rebound.
Fixes: bc142bbb4c ("greybus: arche_platform: Remove child's platform device as part of _remove() fn")
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251219105928.23329-4-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure to depopulate the child devices in case of late probe
failures to avoid leaking the corresponding resources.
Fixes: fd60ac5856 ("greybus: arche-platform: Fix boot, poweroff and fw_flashing seq with APBs")
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251219105928.23329-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove unnecessary else block after return statement in
odm_CfoTracking.c to fix a checkpatch warning.
Signed-off-by: Sanghyeon Lee <sanghae778@gmail.com>
Link: https://patch.msgid.link/20251217155944.9000-3-sanghae778@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove unnecessary braces from single-line conditional statements in
odm_CfoTracking.c to fix a checkpatch warning.
Signed-off-by: Sanghyeon Lee <sanghae778@gmail.com>
Link: https://patch.msgid.link/20251217155944.9000-2-sanghae778@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The bnxt_re SEND path checks wr->send_flags to enable features such as
IP checksum offload. However, send_flags is a bitmask and may contain
multiple flags (e.g. IB_SEND_SIGNALED | IB_SEND_IP_CSUM), while the
existing code uses a switch() statement that only matches when
send_flags is exactly IB_SEND_IP_CSUM.
As a result, checksum offload is not enabled when additional SEND
flags are present.
Replace the switch() with a bitmask test:
if (wr->send_flags & IB_SEND_IP_CSUM)
This ensures IP checksum offload is enabled correctly when multiple
SEND flags are used.
Fixes: 1ac5a40479 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/20251219093308.2415620-1-alok.a.tiwari@oracle.com
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The minimum SMB2 PDU size should be updated to the size of
`struct smb2_pdu` (that is, the size of `struct smb2_hdr` + 2).
Suggested-by: David Howells <dhowells@redhat.com>
Suggested-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Reviewed-by: David Howells <dhowells@redhat.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Since the RFC1002 header has been removed from `struct smb_hdr`,
the minimum SMB1 PDU size should be updated as well.
Fixes: 83bfbd0bb9 ("cifs: Remove the RFC1002 header from smb_hdr")
Suggested-by: David Howells <dhowells@redhat.com>
Suggested-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Reviewed-by: David Howells <dhowells@redhat.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
With the removal of the RFC1002 length field from the SMB header,
smb2_get_msg is now used to get the smb1 request from the request buffer.
Since this function is no longer exclusive to smb2 and now supports smb1
as well, This patch rename it to smb_get_msg to better reflect its usage.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The commit that removed the RFC1002 header from struct smb_hdr didn't also
fix the places in ksmbd that use it in order to provide graceful rejection
of SMB1 protocol requests.
Fixes: 83bfbd0bb9 ("cifs: Remove the RFC1002 header from smb_hdr")
Reported-by: Namjae Jeon <linkinjeon@kernel.org>
Link: https://lore.kernel.org/r/CAKYAXd9Ju4MFkkH5Jxfi1mO0AWEr=R35M3vQ_Xa7Yw34JoNZ0A@mail.gmail.com/
Cc: ChenXiaoSong <chenxiaosong.chenxiaosong@linux.dev>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
ctx->image is declared as __le32 because arm64 instructions are LE
regardless of CPU's runtime endianness. emit_u32_data() emits raw data
and not instructions so cast the value to __le32 to fix the sparse
warning.
Cast function pointer to void * before doing arithmetic.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20251219191310.3204425-1-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
These patches fix a typo and make the coccicheck script more robust by
ensuring that only compatible semantic patches are executed for the
chosen mode.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
-----BEGIN PGP SIGNATURE-----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=nbVj
-----END PGP SIGNATURE-----
Merge tag 'coccinelle-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux
Pull Coccinelle fixes from Julia Lawall:
"These fix a typo and make the coccicheck script more robust by
ensuring that only compatible semantic patches are executed for the
chosen mode"
* tag 'coccinelle-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
Coccinelle: pm_runtime: Fix typo in report message
scripts: coccicheck: filter *.cocci files by MODE
- a quirk for i8042 to better handle another TUXEDO model
- a quirk to atkbd to handle incorcet behavior of HONOR FMB-P internal
keyboard
- a definition for a new ABS_SND_PROFILE event
- fixes to alps and lkkbd drivers to reliably shut down pending work on
removal
- a fix to apple_z2 driver tightening input report parsing
- a fix for "off-by-one" error when validating config in ti_am335x_tsc
driver
- addition of CRKD Guitars device IDs to xpad driver.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCaUeyQQAKCRBAj56VGEWX
nDlZAQCLkGoaHMX6i6Wi2iQIKexRxlERp386vaa2nA4/La3L2wEA1Ce01Ve72v+k
JyVplQCihOzAxDZ8+c2dGtLSwqR8fQY=
=ycHD
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a quirk for i8042 to better handle another TUXEDO model
- a quirk to atkbd to handle incorcet behavior of HONOR FMB-P internal
keyboard
- a definition for a new ABS_SND_PROFILE event
- fixes to alps and lkkbd drivers to reliably shut down pending work on
removal
- a fix to apple_z2 driver tightening input report parsing
- a fix for "off-by-one" error when validating config in ti_am335x_tsc
driver
- addition of CRKD Guitars device IDs to xpad driver.
* tag 'input-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: ti_am335x_tsc - fix off-by-one error in wire_order validation
Input: xpad - add support for CRKD Guitars
Input: add ABS_SND_PROFILE
Input: apple_z2 - fix reading incorrect reports after exiting sleep
Input: alps - fix use-after-free bugs caused by dev3_register_work
Input: i8042 - add TUXEDO InfinityBook Max Gen10 AMD to i8042 quirk table
Input: atkbd - skip deactivate for HONOR FMB-P's internal keyboard
Input: lkkbd - disable pending work before freeing device
Swap the pixel data when writing to framebuffer memory on big-endian
machines. Fixes incorrect output. Aspeed graphics does not appear to
support big-endian framebuffers after AST2400, although the feature
has been documented.
There's a lengthy discussion at [1].
v5:
- avoid restricted cast from __be16 (kernel test robot)
Signed-off-by: René Rebe <rene@exactco.de>
Link: https://lore.kernel.org/dri-devel/20251202.170626.2134482663677806825.rene@exactco.de/ # [1]
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20251212.210504.1355099120650239629.rene@exactco.de
Enhance the coccicheck script to filter *.cocci files based on the
specified MODE (e.g., report, patch). This ensures that only compatible
semantic patch files are executed, preventing errors such as:
"virtual rule report not supported"
This error occurs when a .cocci file does not define a 'virtual <MODE>'
rule, yet is executed in that mode.
For example:
make coccicheck M=drivers/hwtracing/coresight/ MODE=report
In this case, running "secs_to_jiffies.cocci" would trigger the error
because it lacks support for 'report' mode. With this change, such files
are skipped automatically, improving robustness and developer
experience.
Signed-off-by: Songwei Chai <quic_songchai@quicinc.com>
Reviewed-by: Julia Lawall <Julia.Lawall@inria.fr>
bitmap_full() is less verbose and more efficient, as it stops traversing
scan_mask as soon as the 1st unset bit found.
Signed-off-by: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Remove unnecessary blank lines between comment sections to improve
readability.
Signed-off-by: Tomas Borquez <tomasborquez13@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add mmc5633 sensor basic support.
- Support read 20 bits X/Y/Z magnetic.
- Support I3C HDR mode to send start measurememt command.
- Support I3C HDR mode to read all sensors data by one command.
Co-developed-by: Carlos Song <carlos.song@nxp.com>
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Co-developed-by: Adrian Fluturel <fluturel.adrian@gmail.com>
Signed-off-by: Adrian Fluturel <fluturel.adrian@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Replace the bogus "GPL v2" with "GPL" as MODULE_LICNSE() string. The
value does not declare the module's exact license, but only lets the
module loader test whether the module is Free Software or not.
See commit bf7fbeeae6 ("module: Cure the MODULE_LICENSE "GPL" vs.
"GPL v2" bogosity") in the details of the issue. The fix is to use
"GPL" for all modules under any variant of the GPL.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Fixes: 4b2b5e142f ("drm: Move GEM memory managers into modules")
Link: https://patch.msgid.link/20251209140141.94407-3-tzimmermann@suse.de
Fix the compile-time warnings
Warning: drm_gem_shmem_helper.c:104 function parameter 'shmem' not described in 'drm_gem_shmem_init'
Warning: drm_gem_shmem_helper.c:104 function parameter 'size' not described in 'drm_gem_shmem_init'
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Fixes: e3f4bdaf2c ("drm/gem/shmem: Extract drm_gem_shmem_init() from drm_gem_shmem_create()")
Link: https://patch.msgid.link/20251209140141.94407-2-tzimmermann@suse.de
Add compatible string 'memsic,mmc5603' and 'memsic,mmc5633' for
MEMSIC 3-axis magnetometer.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The driver converts values read from the sensor from BE to CPU
endianness in scd4x_read_meas(). The result is then pushed into the
buffer in scd4x_trigger_handler(), so on LE architectures parsing the
buffer using the reported BE type gave wrong results.
scd4x_read_raw() which provides sysfs *_raw values is not affected, it
used the values returned by scd4x_read_meas() without further
conversion.
Fixes: 49d22b695c ("drivers: iio: chemical: Add support for Sensirion SCD4x CO2 sensor")
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add a trivial test case asserting that the BPF verifier enforces
PTR_MAYBE_NULL semantics on the struct file pointer argument of BPF
LSM hook bpf_lsm_mmap_file().
Dereferencing the struct file pointer passed into bpf_lsm_mmap_file()
without explicitly performing a NULL check first should not be
permitted by the BPF verifier as it can lead to NULL pointer
dereferences and a kernel crash.
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20251216133000.3690723-2-mattbobrowski@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
As reported in [0], anonymous memory mappings are not backed by a
struct file instance. Consequently, the struct file pointer passed to
the security_mmap_file() LSM hook is NULL in such cases.
The BPF verifier is currently unaware of this, allowing BPF LSM
programs to dereference this struct file pointer without needing to
perform an explicit NULL check. This leads to potential NULL pointer
dereference and a kernel crash.
Add a strong override for bpf_lsm_mmap_file() which annotates the
struct file pointer parameter with the __nullable suffix. This
explicitly informs the BPF verifier that this pointer (PTR_MAYBE_NULL)
can be NULL, forcing BPF LSM programs to perform a check on it before
dereferencing it.
[0] https://lore.kernel.org/bpf/5e460d3c.4c3e9.19adde547d8.Coremail.kaiyanm@hust.edu.cn/
Reported-by: Kaiyan Mei <M202472210@hust.edu.cn>
Reported-by: Yinhao Hu <dddddd@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Closes: https://lore.kernel.org/bpf/5e460d3c.4c3e9.19adde547d8.Coremail.kaiyanm@hust.edu.cn/
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20251216133000.3690723-1-mattbobrowski@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The x86 XCHG instruction is implicitly locked when one of the
operands is a memory location, making an explicit LOCK prefix
unnecessary.
Stop emitting the LOCK prefix for BPF_XCHG in the JIT atomic
read-modify-write helpers. This avoids redundant instruction
prefixes while preserving correct atomic semantics.
No functional change for other atomic operations.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lore.kernel.org/r/20251208163420.7643-1-ubizjak@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Puranjay Mohan says:
====================
bpf: Optimize recursion detection on arm64
V2: https://lore.kernel.org/all/20251217233608.2374187-1-puranjay@kernel.org/
Changes in v2->v3:
- Added acked by Yonghong
- Patch 2:
- Change alignment of active from 8 to 4
- Use le32_to_cpu in place of get_unaligned_le32()
V1: https://lore.kernel.org/all/20251217162830.2597286-1-puranjay@kernel.org/
Changes in V1->V2:
- Patch 2:
- Put preempt_enable()/disable() around RMW accesses to mitigate
race conditions. Because on CONFIG_PREEMPT_RCU and sleepable
bpf programs, preemption can cause no bpf prog to execute in
case of recursion.
BPF programs detect recursion using a per-CPU 'active' flag in struct
bpf_prog. The trampoline currently sets/clears this flag with atomic
operations.
On some arm64 platforms (e.g., Neoverse V2 with LSE), per-CPU atomic
operations are relatively slow. Unlike x86_64 - where per-CPU updates
can avoid cross-core atomicity, arm64 LSE atomics are always atomic
across all cores, which is unnecessary overhead for strictly per-CPU
state.
This patch removes atomics from the recursion detection path on arm64.
It was discovered in [1] that per-CPU atomics that don't return a value
were extremely slow on some arm64 platforms, Catalin added a fix in
commit 535fdfc5a2 ("arm64: Use load LSE atomics for the non-return
per-CPU atomic operations") to solve this issue, but it seems to have
caused a regression on the fentry benchmark.
Using the fentry benchmark from the bpf selftests shows the following:
./tools/testing/selftests/bpf/bench trig-fentry
+---------------------------------------------+------------------------+
| Configuration | Total Operations (M/s) |
+---------------------------------------------+------------------------+
| bpf-next/master with Catalin’s fix reverted | 51.770 |
|---------------------------------------------|------------------------|
| bpf-next/master | 43.271 |
| bpf-next/master with this change | 43.271 |
+---------------------------------------------+------------------------+
All benchmarks were run on a KVM based vm with Neoverse-V2 and 8 cpus.
This patch yields a 25% improvement in this benchmark compared to
bpf-next. Notably, reverting Catalin's fix also results in a performance
gain for this benchmark, which is interesting but expected.
For completeness, this benchmark was also run with the change enabled on
x86-64, which resulted in a 30% regression in the fentry benchmark. So,
it is only enabled on arm64.
P.S. - Here is more data with other program types:
+-----------------+-----------+-----------+----------+
| Metric | Before | After | % Diff |
+-----------------+-----------+-----------+----------+
| fentry | 43.149 | 53.948 | +25.03% |
| fentry.s | 41.831 | 50.937 | +21.76% |
| rawtp | 50.834 | 58.731 | +15.53% |
| fexit | 31.118 | 34.360 | +10.42% |
| tp | 39.536 | 41.632 | +5.30% |
| syscall-count | 8.053 | 8.305 | +3.13% |
| fmodret | 33.940 | 34.769 | +2.44% |
| kprobe | 9.970 | 9.998 | +0.28% |
| usermode-count | 224.886 | 224.839 | -0.02% |
| kernel-count | 154.229 | 153.043 | -0.77% |
+-----------------+-----------+-----------+----------+
[1] https://lore.kernel.org/all/e7d539ed-ced0-4b96-8ecd-048a5b803b85@paulmck-laptop/
====================
Link: https://patch.msgid.link/20251219184422.2899902-1-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BPF programs detect recursion using a per-CPU 'active' flag in struct
bpf_prog. The trampoline currently sets/clears this flag with atomic
operations.
On some arm64 platforms (e.g., Neoverse V2 with LSE), per-CPU atomic
operations are relatively slow. Unlike x86_64 - where per-CPU updates
can avoid cross-core atomicity, arm64 LSE atomics are always atomic
across all cores, which is unnecessary overhead for strictly per-CPU
state.
This patch removes atomics from the recursion detection path on arm64 by
changing 'active' to a per-CPU array of four u8 counters, one per
context: {NMI, hard-irq, soft-irq, normal}. The running context uses a
non-atomic increment/decrement on its element. After increment,
recursion is detected by reading the array as a u32 and verifying that
only the expected element changed; any change in another element
indicates inter-context recursion, and a value > 1 in the same element
indicates same-context recursion.
For example, starting from {0,0,0,0}, a normal-context trigger changes
the array to {0,0,0,1}. If an NMI arrives on the same CPU and triggers
the program, the array becomes {1,0,0,1}. When the NMI context checks
the u32 against the expected mask for normal (0x00000001), it observes
0x01000001 and correctly reports recursion. Same-context recursion is
detected analogously.
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20251219184422.2899902-3-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BPF programs detect recursion by doing atomic inc/dec on a per-cpu
active counter from the trampoline. Create two helpers for operations on
this active counter, this makes it easy to changes the recursion
detection logic in future.
This commit makes no functional changes.
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20251219184422.2899902-2-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add ti-ads1018 driver for Texas Instruments ADS1018 and ADS1118 SPI
analog-to-digital converters.
This chips' MOSI pin is shared with a data-ready interrupt. Defining
this interrupt in devicetree is optional, therefore we only create an
IIO trigger if one is found.
Handling this interrupt requires some considerations. When enabling the
trigger the CS line is tied low (active), thus we need to hold
spi_bus_lock() too, to avoid state corruption. This is done inside the
set_trigger_state() callback, to let users use other triggers without
wasting a bus lock.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add documentation for Texas Instruments ADS1018 and ADS1118
analog-to-digital converters.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Delete iio_device_claim_direct_mode() when reading temperature.
It enables polling of temperature data while buffer is on and it
doesn't have any impact on the other sensors.
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Correct temperature computation is (raw + offset) * scale and not
apply scale and offset afterward.
Fix temperature offset reporting to the correct value and update
commentaries for the new computation.
Fixes: 27e072bc34 ("iio: imu: inv_icm45600: add IMU IIO gyroscope device")
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Allow the user to select either the SPI or the i2c bus specific
module and autoselect core if needed.
Signed-off-by: Petre Rodan <petre.rodan@subdimension.ro>
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Timestamps were already written to the buffer in
scd4x_trigger_handler(), this patch makes them available as a channel.
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
