uapi.crtc is not set for joiner secondary pipes, so generally
should not be used anywhere after the initial state copy. Switch
to hw.crtc which actually indicates that the plane is enabled.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251119181606.17129-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Spacemit:
The Spacemit k1 wants the freescale qspi driver enabled as a module
as they appear to be rather similar IPs.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCaSh90QAKCRB4tDGHoIJi
0gTWAP90GE5app/mUqZw0IFe2+3K03Hx/ocw3LdQdNGrHfw0zAEAjlDZxZ1N0zWw
nplj+4kBMS05FyLya5DnmJfipfbGkQA=
=Nlt+
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=zVNv
-----END PGP SIGNATURE-----
Merge tag 'riscv-config-for-v6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/defconfig
RISC-V config for v6.19
Spacemit:
The Spacemit k1 wants the freescale qspi driver enabled as a module
as they appear to be rather similar IPs.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-config-for-v6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: defconfig: enable SPI_FSL_QUADSPI as a module
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
uapi.crtc is NULL for joiner secondary pipes, so using that is
nonsense in most places. Switch to hw.crtc so that we use the
deferred cursor unpin also on joiner secondary pipes.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251119181606.17129-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
ccache:
Add a compatible for the pic64gx SoC. No driver change needed, as it
falls back to the PolarFire SoC.
hisi hha/generic cpu cache maintenance:
Add support for a non-architectural mechanism for invalidating memory
regions, needed for some cxl implementations on arm64 (and probably
elsewhere in the future). The HiSilicon Hydra Home Agent is the first
driver to provide this support.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCaSiFRQAKCRB4tDGHoIJi
0glXAQDJ0NsReTniO9TgJkzw05oWwCKoOL4MadxBM/4MRLJXyQD/YWW09btaYxTZ
fDVHpb/P2BDD5qNwaXkONMIeoU/iHAo=
=zk03
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=wip1
-----END PGP SIGNATURE-----
Merge tag 'cache-for-v6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/drivers-late
standalone cache drivers for v6.19
ccache:
Add a compatible for the pic64gx SoC. No driver change needed, as it
falls back to the PolarFire SoC.
hisi hha/generic cpu cache maintenance:
Add support for a non-architectural mechanism for invalidating memory
regions, needed for some cxl implementations on arm64 (and probably
elsewhere in the future). The HiSilicon Hydra Home Agent is the first
driver to provide this support.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'cache-for-v6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
MAINTAINERS: refer to intended file in STANDALONE CACHE CONTROLLER DRIVERS
cache: Support cache maintenance for HiSilicon SoC Hydra Home Agent
cache: Make top level Kconfig menu a boolean dependent on RISCV
MAINTAINERS: Add Jonathan Cameron to drivers/cache and add lib/cache_maint.c + header
arm64: Select GENERIC_CPU_CACHE_MAINTENANCE
lib: Support ARCH_HAS_CPU_CACHE_INVALIDATE_MEMREGION
memregion: Support fine grained invalidate by cpu_cache_invalidate_memregion()
memregion: Drop unused IORES_DESC_* parameter from cpu_cache_invalidate_memregion()
dt-bindings: cache: sifive,ccache0: add a pic64gx compatible
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Microchip:
Add bindings and mfd drivers for two syscon regions on PolarFire SoC,
needed as part of a rework of the devicetree to permit supporting,
among other things, pinctrl sanely and avoiding the "new" pic64gx SoC
ever using the original incorrect clock nodes. Fiddle with the Microchip
RISC-V MAINTAINERS entry to add these drivers and avoid branding it FPGA
only.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCaSh2VwAKCRB4tDGHoIJi
0v1wAQDkO6LPWFsER9jbuSlGCWMvfPalt4ANm2drGchLjivx9AD7BK2X9hMDjZbb
9Aw7UIvVmz6blpnMuvH+waFc0l8V1wQ=
=TqpS
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=JOnG
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-for-v6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/drivers-late
RISC-V soc-drivers for v6.19
Microchip:
Add bindings and mfd drivers for two syscon regions on PolarFire SoC,
needed as part of a rework of the devicetree to permit supporting,
among other things, pinctrl sanely and avoiding the "new" pic64gx SoC
ever using the original incorrect clock nodes. Fiddle with the Microchip
RISC-V MAINTAINERS entry to add these drivers and avoid branding it FPGA
only.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'soc-drivers-for-v6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
MAINTAINERS: rename Microchip RISC-V entry
MAINTAINERS: add new soc drivers to Microchip RISC-V entry
soc: microchip: add mfd drivers for two syscon regions on PolarFire SoC
dt-bindings: soc: microchip: document the simple-mfd syscon on PolarFire SoC
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Two small fixes:
- mailbox: Stop leaking a reference to the mbox platform device during
lookup
- sart: drop device reference after lookup since it's no longer used
afterwards
Signed-off-by: Sven Peter <sven@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS3vz815OHsEaWy0u9EEX0kKnUe6QUCaSdsTAAKCRBEEX0kKnUe
6Q3TAP9LzbLNHLFbDgCQXRRU5Qb5RxakNQ6o6eoyJP2I4C16SwEA0PChp6r/yH7I
US56W3mTG3vlJKag472fLyDmZITkFw0=
=9YPH
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmkoyaMACgkQmmx57+YA
GNln3A/9E7TppsITh3vRzMhHUanabw6Lsy0K/kg0oUx9YWa4fRRqtqbO2sI6L+ch
M9jb0PKXFEbZzpNN67fYBG/f0sSSkhjUEAUiJD1irrXtDcOPAnm5Mx1FlentnE/u
P1Y/Jr0unCQ9Qur6u35soUs4+QUhlDnTmTYRHP27zoPoaynziW2Uhz+GbZoqZ4Ty
PrCEu3h0qZZU4JaFeQo3tn1Z3g72UqMFfIFGyOZpsg6mMBfrus6FTn5BAGc7OHtq
73spyb56/6T8R7YRPfFB2VgrP6ndbQN1GY4vKQ2tdpA9VUybXJoidmtgJj9kw5pp
1Q7c5TscgElgLnl9xA8hU7V0O0eYMB2JsHD80lNDEn0wn3/6GiUSWayqrSgqMBTN
1eD6NXnHpg8WhZWW0jiSGrGi2x5o/JkLw4XrmIxp6kKrNXyrjuRHZOm23dYUBEsx
M2yQZGrgBhlMb0v6EqKc/AcxIr+Vs8L+OHaIGbrb1Jx4V9Hz+QrRwuO/pDbTwxTc
ssaTAf5dKoqQO63dtmdNPkwh7PHBxXdo3CDeHgAqMiQ7cEutmw3QQi2ik0sPtar9
phcX2bjwYdzbWaorp/k0CVQAF0N/2wjYJYXsBAJiczFweagfiii5vZOYkrFH31vy
8FWq0kRoIt+HZF8Y/j/AjNnLLJ6iCmaowoanYplRxw1F4W6oFgQ=
=Mjfk
-----END PGP SIGNATURE-----
Merge tag 'apple-soc-drivers-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/sven/linux into soc/drivers-late
Apple SoC driver updates for 6.18
Two small fixes:
- mailbox: Stop leaking a reference to the mbox platform device during
lookup
- sart: drop device reference after lookup since it's no longer used
afterwards
Signed-off-by: Sven Peter <sven@kernel.org>
* tag 'apple-soc-drivers-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/sven/linux:
soc: apple: sart: drop device reference after lookup
soc: apple: mailbox: fix device leak on lookup
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
s/it/if/ and s/revokation/revocation/, capitalize "clear", and add a
period after the sentence. Fix the comment formatting.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
* Extend software node implementation, allowing its properties to reference
existing firmware nodes.
* Update the GPIO property interface to use reworked swnode macros.
* Rework reset-gpio code to use GPIO lookup via swnode.
* Fix spi-cs42l43 driver to work with swnode changes.
-----BEGIN PGP SIGNATURE-----
iI0EABYKADUWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCaR878xcccC56YWJlbEBw
ZW5ndXRyb25peC5kZQAKCRDVhaclGDdiwBu+AQCw1iTmGlzqT+PqEXvWljTZeVDJ
GViCOX5rRSTTyuq8FwEAp6ToNopfJunQ/XQRdKHC0OX/aYtxo3eYI82LG9meSQ8=
=AMsz
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=fwRh
-----END PGP SIGNATURE-----
Merge tag 'reset-gpio-for-v6.19' of https://git.pengutronix.de/git/pza/linux into soc/drivers-late
Reset/GPIO/swnode changes for v6.19
* Extend software node implementation, allowing its properties to reference
existing firmware nodes.
* Update the GPIO property interface to use reworked swnode macros.
* Rework reset-gpio code to use GPIO lookup via swnode.
* Fix spi-cs42l43 driver to work with swnode changes.
* tag 'reset-gpio-for-v6.19' of https://git.pengutronix.de/git/pza/linux:
reset: gpio: use software nodes to setup the GPIO lookup
reset: gpio: convert the driver to using the auxiliary bus
reset: make the provider of reset-gpios the parent of the reset device
reset: order includes alphabetically in reset/core.c
gpio: swnode: allow referencing GPIO chips by firmware nodes
spi: cs42l43: Use actual ACPI firmware node for chip selects
software node: allow referencing firmware nodes
software node: increase the reference of the swnode by its fwnode
software node: read the reference args via the fwnode API
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Merge series from Andy Shevchenko <andriy.shevchenko@linux.intel.com>:
While reading some other stuff, I noticed that this driver may
be improved. Here is the set of refactoring and cleaning it up.
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
Set of changes addressing gaps in DRAM offset checks, error paths and
PM.
The first three patches are straight-forward, the last three relate to
the power management. The standing out PM change is removal of the
catpt-driver as a system-suspend (S3) blocker. This is a suggestion from
Andy as indeed, audio is not a critical component that should prevent
the system from going into S3. Whatever happens, the driver can recover
on a follow up resume (S3 -> S0).
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
Now that the full class driver is in place we can add support to the
Intel machine driver for Cirrus's new SDCA audio CODEC the cs42l45. This
makes some minor tweaks to the machine driver itself to support SDCA
devices, and then adds the necessary tables etc. to define the device.
Note, this series shouldn't have any dependencies on the other series of
improvements to the class driver that is already on the list. So either
can be merged first.
strncpy() is deprecated for NUL-terminated destination buffers; use
strscpy_pad() instead to retain the NUL-padding behavior of strncpy().
The destination buffer is initialized using kzalloc() with a 'signature'
size of ECRYPTFS_PASSWORD_SIG_SIZE + 1. strncpy() then copies up to
ECRYPTFS_PASSWORD_SIG_SIZE bytes from 'key_desc', NUL-padding any
remaining bytes if needed, but expects the last byte to be zero.
strscpy_pad() also copies the source string to 'signature', and NUL-pads
the destination buffer if needed, but ensures it's always NUL-terminated
without relying on it being zero-initialized.
strscpy_pad() automatically determines the size of the fixed-length
destination buffer via sizeof() when the optional size argument is
omitted, making an explicit size unnecessary.
In encrypted_init(), the source string 'key_desc' is validated by
valid_ecryptfs_desc() before calling ecryptfs_fill_auth_tok(), and is
therefore NUL-terminated and satisfies the __must_be_cstr() requirement
of strscpy_pad().
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The local variables 'size_t datalen' are unsigned and cannot be less
than zero. Remove the redundant conditions.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
MAINTAINERS:
There's some re-jigging of things to reduce duplication, by moving me
into the StarFive entry and my tree into the Microchip one. The
other platforms that I look after (SiFive and Canaan) are marked as Odd
Fixes to better represent their status. Nothing functionally changes.
Microchip:
Add adc and mmc nodes for the Beagle-V Fire.
SiFive:
Add pwm fans to the unmatched board.
StarFive:
Add the Orange PI RV board, another VisionFive 2 derived SBC. This
required moving a mmc related nodes out of the common file, into
<board>.dts. Yet more things moved out of the common file when the
VisionFive 2 Lite boards were added, which use the JH7110S SoC instead of
the JH7110. The difference here between SoCs is just temperature and
frequency ranges, but the boards differ enough that the pool of common
nodes decreases a little further. There's an eMMC and an SD variant
here, that are different SKUs, bringing the total new StarFive boards to
three.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCaSiH8AAKCRB4tDGHoIJi
0nvqAQCJMelvf23z8LR/GcUmJlB5eWc/+g5JAyy/4HiFH6hAiAEAgOPVRGjH3sav
3RGf+SFZWLRmPQcG2mguckc7I+RUSQo=
=g/Rw
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=pkzr
-----END PGP SIGNATURE-----
Merge tag 'riscv-dt-for-v6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt
RISC-V Devicetrees for v6.19
MAINTAINERS:
There's some re-jigging of things to reduce duplication, by moving me
into the StarFive entry and my tree into the Microchip one. The
other platforms that I look after (SiFive and Canaan) are marked as Odd
Fixes to better represent their status. Nothing functionally changes.
Microchip:
Add adc and mmc nodes for the Beagle-V Fire.
SiFive:
Add pwm fans to the unmatched board.
StarFive:
Add the Orange PI RV board, another VisionFive 2 derived SBC. This
required moving a mmc related nodes out of the common file, into
<board>.dts. Yet more things moved out of the common file when the
VisionFive 2 Lite boards were added, which use the JH7110S SoC instead of
the JH7110. The difference here between SoCs is just temperature and
frequency ranges, but the boards differ enough that the pool of common
nodes decreases a little further. There's an eMMC and an SD variant
here, that are different SKUs, bringing the total new StarFive boards to
three.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-for-v6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: starfive: add Orange Pi RV
dt-bindings: riscv: starfive: add xunlong,orangepi-rv
riscv: dts: starfive: Add VisionFive 2 Lite eMMC board device tree
riscv: dts: starfive: Add VisionFive 2 Lite board device tree
riscv: dts: starfive: Add common board dtsi for VisionFive 2 Lite variants
riscv: dts: starfive: jh7110-common: Move out some nodes to the board dts
dt-bindings: riscv: Add StarFive JH7110S SoC and VisionFive 2 Lite board
MAINTAINERS: degrade RISC-V MISC SOC SUPPORT to Odd Fixes
MAINTAINERS: add tree to RISC-V Microchip entry
MAINTAINERS: remove patchwork from RISC-V MISC SOC SUPPORT
MAINTAINERS: add Conor to StarFive entry
riscv: dts: sifive: unmatched: Add PWM controlled fans
riscv: dts: microchip: enable qspi adc/mmc-spi-slot on BeagleV Fire
dts: starfive: jh7110-common: split out mmc0 reset pins from common into boards
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The base address of JPEG decoder core 1 should start at 0x10000, and
have a size of 0x10000, i.e. it is right after core 0.
Instead the core has the same base address as core 0, and with a crazy
large size. This looks like a mixup of address and size cells when the
ranges were converted.
This causes the kernel to fail to register the second core due to sysfs
name conflicts:
sysfs: cannot create duplicate filename '/devices/platform/soc/soc:jpeg-decoder@1a040000/1a040000.jpgdec'
Fix up the address range.
Fixes: a9eac43d03 ("arm64: dts: mediatek: mt8195: Fix ranges for jpeg enc/decoder nodes")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20251127100044.612825-1-wenst@chromium.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add support for the Cirrus Logic CS42L45 standalone using SoundWire.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251127163426.2500633-8-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the helper functions into the machine driver for the cs42l45,
this will register a jack for jack detection and add things into
to the components string if they are needed.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251127163426.2500633-7-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the sof_sdw machine driver assumes that all devices involved
in the sound card are connected through a DAI link. However for SDCA
devices we still want the HID (Human Interface Device, used for jack
buttons) to be part of the sound card, but it contains no DAI links.
Add support into the machine driver to specify a list of auxiliary
devices to merged into the card.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251127163426.2500633-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As SDCA devices will support each DAI link on a different child device,
move the codec name from codec_info to each dai_info. To allow the
appropriate function device to be bound to each DAI link.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251127163426.2500633-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The assumption so far is that all the DAI links for a given audio part
would be on the same device. However, as SDCA implements each audio
function on a separate auxiliary driver this will no longer be true.
This means it is necessary to add additional codec_conf structures to
get the prefix for an audio part to apply to all the auxiliary drivers
that make up that part.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251127163426.2500633-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There have been some complaints around the UCM files for SDCA
devices that the control system is quite hard to follow. This is
definitely true without the specification handy the naming can be
a little cryptic. However, as most of the information is parsed
from DisCo there are some limits to what the driver can safely do
to improve this.
However, one area that can be improved is the non-streaming
input/output terminals. These have a field (enum sdca_terminal_type)
that describes the usage of that terminal. These types can be
appended to the entity name to give the users a better clue as
to the purpose. For example "OT 43", would now become "OT 43
Headphone". This would follow through into the jack controls which
would change from "OT 43 Jack" to "OT 43 Headphone Jack", making the
purpose much more obvious to the user.
This provides slightly more readable controls without relying on
implicit knowledge that individual parts might not conform to.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251127163426.2500633-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently mute controls will be called "FU xx Mute Switch" (note
the switch is added programmatically outside the coverage of this
patch) and the accompanying volume control would be called "FU xx
Channel Volume". These names are taken from the SDCA specification,
however, this does not mesh well with the ALSA naming system. ALSA
generally expects enables rather than mutes and expects that mutes
and volumes have matching names.
Update the names and invert the mute controls to make them more
standard "FU XX Channel Switch", this does slightly deviate from
the SDCA specification but it makes the rest of the Linux ecosystem
a lot happier.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251127163426.2500633-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Slava and a couple of fixes from Ziming and myself to avoid operating
on potentially invalid memory, all marked for stable.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmkomw8THGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi7inB/4kGwlnraCx43Lw4UG4K/Z6RKypQ8zD
WxwFvszq9jHJL7uUvXLx97sZApeK+AG6Kql/jnpEUUkFlG1h3013OwKJgRINrOdn
5wJaWwi73akCWt3FDgcpc+gnxQ3s7gbD3cPbNeEhoHTjUrHk59ZgT37zbnUIrFK3
NqnSBO7+7EPZtWwmC7mtki+lRLr3z47TqeqLqLQhw6GoenRo/9ZrUynvneCWKXfT
bZRZ5MDJGg/ZMR1agPmUojgHkkZAD5xc21fK5mmYeMr9JbNB4Vw9BO48XW+WCA3o
TH5en6HZhJuoxkp21mG7BZjnkAVTPCpo3pMt2IqlAIWCkODtXlThWGQN
=cZYx
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-6.18-rc8' of https://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"A patch to make sparse read handling work in msgr2 secure mode from
Slava and a couple of fixes from Ziming and myself to avoid operating
on potentially invalid memory, all marked for stable"
* tag 'ceph-for-6.18-rc8' of https://github.com/ceph/ceph-client:
libceph: prevent potential out-of-bounds writes in handle_auth_session_key()
libceph: replace BUG_ON with bounds check for map->max_osd
ceph: fix crash in process_v2_sparse_read() for encrypted directories
libceph: drop started parameter of __ceph_open_session()
libceph: fix potential use-after-free in have_mon_and_osd_map()
regulator_supply_alias_list was accessed without any locking in
regulator_supply_alias(), regulator_register_supply_alias(), and
regulator_unregister_supply_alias(). Concurrent registration,
unregistration and lookups can race, leading to:
1 use-after-free if an alias entry is removed while being read,
2 duplicate entries when two threads register the same alias,
3 inconsistent alias mappings observed by consumers.
Protect all traversals, insertions and deletions on
regulator_supply_alias_list with the existing regulator_list_mutex.
Fixes: a06ccd9c37 ("regulator: core: Add ability to create a lookup alias for supply")
Signed-off-by: sparkhuang <huangshaobo3@xiaomi.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251127025716.5440-1-huangshaobo3@xiaomi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The define ARM64_FEATURE_FIELD_BITS is now unused and feature id
fields don't always have 4 bits. Remove it.
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In test_clidr() if an empty cache level is not found then the TEST_ASSERT
will not fire. Fix this by considering all 7 possible levels when iterating
through the hierarchy. Found by inspection.
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Oliver Upton <oupton@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
ARM64_FEATURE_FIELD_BITS is set to 4 but not all ID register fields are 4
bits. See for instance ID_AA64SMFR0_EL1. The last user of this define,
ARM64_FEATURE_FIELD_BITS, is the set_id_regs selftest. Its logic assumes
the fields aren't a single bits; assert that's the case and stop using the
define. As there are no more users, ARM64_FEATURE_FIELD_BITS is removed
from the arm64 tools sysreg.h header. A separate commit removes this from
the kernel version of the header.
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Oliver Upton <oupton@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The ATOMIC_FETCH_OP_AND and ATOMIC64_FETCH_OP_AND macros accept 'mb' and
'cl' parameters but never use them in their implementation. These macros
simply delegate to the corresponding andnot functions, which handle the
actual atomic operations and memory barriers.
Signed-off-by: Seongsu Park <sgsu.park@samsung.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The driver uses DMA but does not mark it as a prerequisite in
Kconfig. As it is also defined with COMPILE_TEST, autobuilders complain
about certain symbols not being available when linking on architectures
without DMA support (?) like sh.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202511071114.8WeW2GZK-lkp@intel.com
Cc: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Prepare for the advent of globally available common field_get() and
field_prep() macros by undefining the symbols before defining local
variants. This prevents redefinition warnings from the C preprocessor
when introducing the common macros later.
Suggested-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
regressions.
Current release - regressions:
- mptcp: initialize rcv_mss before calling tcp_send_active_reset()
- eth: mlx5e: fix validation logic in rate limiting
Previous releases - regressions:
- xsk: avoid data corruption on cq descriptor number
- bluetooth:
- prevent race in socket write iter and sock bind
- fix not generating mackey and ltk when repairing
- can:
- kvaser_usb: fix potential infinite loop in command parsers
- rcar_canfd: fix CAN-FD mode as default
- eth: veth: reduce XDP no_direct return section to fix race
- eth: virtio-net: avoid unnecessary checksum calculation on guest RX
Previous releases - always broken:
- sched: fix TCF_LAYER_TRANSPORT handling in tcf_get_base_ptr()
- bluetooth: mediatek: fix kernel crash when releasing iso interface
- vhost: rewind next_avail_head while discarding descriptors
- eth: r8169: fix RTL8127 hang on suspend/shutdown
- eth: aquantia: add missing descriptor cache invalidation on ATL2
- dsa: microchip: fix resource releases in error path
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=0MuR
-----END PGP SIGNATURE-----
Merge tag 'net-6.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth and CAN. No known outstanding
regressions.
Current release - regressions:
- mptcp: initialize rcv_mss before calling tcp_send_active_reset()
- eth: mlx5e: fix validation logic in rate limiting
Previous releases - regressions:
- xsk: avoid data corruption on cq descriptor number
- bluetooth:
- prevent race in socket write iter and sock bind
- fix not generating mackey and ltk when repairing
- can:
- kvaser_usb: fix potential infinite loop in command parsers
- rcar_canfd: fix CAN-FD mode as default
- eth:
- veth: reduce XDP no_direct return section to fix race
- virtio-net: avoid unnecessary checksum calculation on guest RX
Previous releases - always broken:
- sched: fix TCF_LAYER_TRANSPORT handling in tcf_get_base_ptr()
- bluetooth: mediatek: fix kernel crash when releasing iso interface
- vhost: rewind next_avail_head while discarding descriptors
- eth:
- r8169: fix RTL8127 hang on suspend/shutdown
- aquantia: add missing descriptor cache invalidation on ATL2
- dsa: microchip: fix resource releases in error path"
* tag 'net-6.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
mptcp: Initialise rcv_mss before calling tcp_send_active_reset() in mptcp_do_fastclose().
net: fec: do not register PPS event for PEROUT
net: fec: do not allow enabling PPS and PEROUT simultaneously
net: fec: do not update PEROUT if it is enabled
net: fec: cancel perout_timer when PEROUT is disabled
net: mctp: unconditionally set skb->dev on dst output
net: atlantic: fix fragment overflow handling in RX path
MAINTAINERS: separate VIRTIO NET DRIVER and add netdev
virtio-net: avoid unnecessary checksum calculation on guest RX
eth: fbnic: Fix counter roll-over issue
mptcp: clear scheduled subflows on retransmit
net: dsa: sja1105: fix SGMII linking at 10M or 100M but not passing traffic
s390/net: list Aswin Karuvally as maintainer
net: wwan: mhi: Keep modem name match with Foxconn T99W640
vhost: rewind next_avail_head while discarding descriptors
net/sched: em_canid: fix uninit-value in em_canid_match
can: rcar_canfd: Fix CAN-FD mode as default
xsk: avoid data corruption on cq descriptor number
r8169: fix RTL8127 hang on suspend/shutdown
net: sxgbe: fix potential NULL dereference in sxgbe_rx()
...
Merge series from Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>:
Airoha EN7523 snfi controller almost identical to AN7581 one, so the same
driver can be used. The only known difference appears in the very specific
boot conditions, when attached serial console force EN7523 SoC boots
in undocumented (reserved) mode. In this mode dma reading of the flash
works incorrectly.
This patch series:
* add support of EN7523 SoC
* add spinand node to en7523 dts (so spinand flash finally becomes usable)
* updates dt-bindings to mark driver as compatible with en7523
* disable dma usage to prevent possible data damage if booting in
reserved mode was detected.
If power state is retained between suspend/resume cycle, we don't need
to perform full GT re-initialization. Introduce runtime helpers for GT
which greatly reduce suspend/resume delay.
v2: Drop redundant xe_gt_sanitize() and xe_guc_ct_stop() (Daniele)
Use runtime naming for guc helpers (Daniele)
v3: Drop redundant logging, add kernel doc (Michal)
Use runtime naming for ct helpers (Michal)
v4: Fix tags (Rodrigo)
v5: Include host_l2_vram workaround (Daniele)
Reuse xe_guc_submit_enable/disable() helpers (Daniele)
Co-developed-by: Riana Tauro <riana.tauro@intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20251030122357.128825-5-raag.jadav@intel.com
We hold an additional reference to the runtime PM to keep PF in D0
during VFs lifetime, as our VFs do not implement the PM capability.
This means we should never be runtime suspending as long as VFs are
enabled.
v8: Add !IS_SRIOV_VF() assert (Matthew Brost)
Suggested-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20251030122357.128825-4-raag.jadav@intel.com
Introduce pause/unpause() helpers which stop/start further runs of
submission tasks on given GuC and can be called from PF context. This
is in preparation of usecases where we simply need to stop/start the
scheduler without losing GuC state and don't require dealing with VF
migration.
v7: Reword commit message (Matthew Brost)
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20251030122357.128825-3-raag.jadav@intel.com
Now that pause/unpause() helpers have been updated for VF migration
usecase, update their naming to match the functionality and while at it,
add IS_SRIOV_VF() assert to make sure they are not abused.
v7: Add IS_SRIOV_VF() assert (Matthew Brost)
Use "vf" suffix (Michal)
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20251030122357.128825-2-raag.jadav@intel.com
The soundwire regmap that may be allocated during probe is not freed on
late probe failures.
Add the missing error handling.
Fixes: be2af391ce ("ASoC: codecs: Add WCD939x Soundwire devices driver")
Cc: stable@vger.kernel.org # 6.9
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251127135057.2216-1-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the __free(kfree) cleanup to replace instances of manually
calling kfree(). Also make some code path simplifications that this
allows.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251127155817.1374079-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2c regmap allocated during probe is never freed.
Switch to using the device managed allocator so that the regmap is
released on probe failures (e.g. probe deferral) and on driver unbind.
Fixes: 3a2a8cc3fe ("hwmon: (max6697) Convert to use regmap")
Cc: stable@vger.kernel.org # 6.12
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20251127134351.1585-1-johan@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Static declaration by default are 0 or NULL, no need to initialise
them explicitly. Remove unneeded PM related macro.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Prajna Rajendra Kumar <prajna.rajendrakumar@microchip.com>
Link: https://patch.msgid.link/20251126075558.2035012-7-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
