The i915 core only needs three rather specific functions from
soc/intel_dram.[ch]: i9xx_fsb_freq(), ilk_fsb_freq(), and
ilk_mem_freq(). Add new i915_freq.[ch] and duplicate those functions for
i915 to reduce the dependency on soc/ code.
Wile duplication in general is bad, here it's a tradeoff to simplify the
i915, xe and display interactions.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/7bac1b194afdc20cd45e625a0a32fcbcd0b1136e.1763578288.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
While edram detection ostensibly belongs with the rest of the dram stuff
in soc/intel_dram.c, it's only required by i915 core, not
display. Extract it to a separate i915_edram.[ch] file.
This allows us to drop the edram_size_mb member from struct xe_device.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/612edb7b70755655fbf193ba8af1c539fb93b698.1763578288.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
If the parsed ELD has spk_alloc=0, it currently assigns the parsed ELD
spk_alloc to 0xffff. However, we should also check if there is at least
one SAD (Short audio descriptor) to enforce the assumption, as ELD
without any sad_count, is usually considered invalid for e.g. in
commit ce9778b7a0272("ALSA: hda/hdmi: Consider ELD is invalid when no
SAD is present").
Signed-off-by: Umang Jain <uajain@igalia.com>
Link: https://patch.msgid.link/20251120141757.901505-1-uajain@igalia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The VSIE code currently checks that the BSCA struct fits within
a page, and returns a validity exception 0x003b if it doesn't.
The BSCA is pinned in memory rather than shadowed (see block
comment at end of kvm_s390_cpu_feat_init()), so enforcing the
CPU entries to be on the same pinned page makes sense.
Except those entries aren't going to be used below the guest,
and according to the definition of that validity exception only
the header of the BSCA (everything but the CPU entries) needs to
be within a page. Adjust the alignment check to account for that.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Starting with Zen6, AMD's Scalable MCA systems will incorporate two new bits in
MCA_STATUS and MCA_CONFIG MSRs. These bits will indicate if a valid System
Physical Address (SPA) is present in MCA_ADDR.
PhysAddrValidSupported bit (MCA_CONFIG[11]) serves as the architectural
indicator and states if PhysAddrV bit (MCA_STATUS[54]) is Reserved or if it
indicates validity of SPA in MCA_ADDR.
PhysAddrV bit (MCA_STATUS[54]) advertises if MCA_ADDR contains valid SPA or if
it is implementation specific.
Use and prefer MCA_STATUS[PhysAddrV] when checking for a usable address.
Signed-off-by: Avadhut Naik <avadhut.naik@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20251118191731.181269-1-avadhut.naik@amd.com
The MCA threshold limit generally is not something that needs to change during
runtime. It is common for a system administrator to decide on a policy for
their managed systems.
If MCA thresholding is OS-managed, then the threshold limit must be set at
every boot. However, many systems allow the user to set a value in their BIOS.
And this is reported through an APEI HEST entry even if thresholding is not in
FW-First mode.
Use this value, if available, to set the OS-managed threshold limit. Users
can still override it through sysfs if desired for testing or debug.
APEI is parsed after MCE is initialized. So reset the thresholding blocks
later to pick up the threshold limit.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20251104-wip-mca-updates-v8-0-66c8eacf67b9@amd.com
Comparing to exactly 1 will fail if more than one ring buffer
event was seen since the last call to timerlat_bpf_wait(), which
can happen in some race scenarios.
Signed-off-by: Crystal Wood <crwood@redhat.com>
Link: https://lore.kernel.org/r/20251112152529.956778-5-crwood@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
The timerlat "top stop at failed action" test was relying on "ALL" being
printed immediately after the "1" from the threshold action. Besides being
fragile, this depends on stdbuf behavior, which is easy to miss when
recreating the test outside of the framework for debugging purposes.
Instead, use the expected/unexpected text mechanism from the
corresponding osnoise test.
Signed-off-by: Crystal Wood <crwood@redhat.com>
Link: https://lore.kernel.org/r/20251112152529.956778-2-crwood@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
When running rtla as
`rtla <timerlat|osnoise> <top|hist> -t custom_file.txt -a 100`
-a options override trace output filename specified by -t option.
Running the command above will create <timerlat|osnoise>_trace.txt file
instead of custom_file.txt. Fix this by making sure that -a option does
not override trace output filename even if it's passed after trace
output filename is specified.
Fixes: 173a3b0148 ("rtla/timerlat: Add the automatic trace option")
Signed-off-by: Ivan Pravdin <ipravdin.official@gmail.com>
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Link: https://lore.kernel.org/r/b6ae60424050b2c1c8709e18759adead6012b971.1762186418.git.ipravdin.official@gmail.com
[ use capital letter in subject, as required by tracing subsystem ]
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Currently, user can only specify cgroup to the tracer's thread the
following ways:
`-C[cgroup]`
`-C[=cgroup]`
`--cgroup[=cgroup]`
If user tries to specify cgroup as `-C [cgroup]` or `--cgroup [cgroup]`,
the parser silently fails and rtla's cgroup is used for the tracer
threads.
To make interface more user-friendly, allow user to specify cgroup in
the aforementioned way, i.e. `-C [cgroup]` and `--cgroup [cgroup]`.
Refactor identical logic between -t/--trace and -C/--cgroup into a
common function.
Change documentation to reflect this user interface change.
Fixes: a957cbc025 ("rtla: Add -C cgroup support")
Signed-off-by: Ivan Pravdin <ipravdin.official@gmail.com>
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Link: https://lore.kernel.org/r/16132f1565cf5142b5fbd179975be370b529ced7.1762186418.git.ipravdin.official@gmail.com
[ use capital letter in subject, as required by tracing subsystem ]
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
A long time ago, when the usage help was short, it was a favor
to the user to show it on error. Now that the usage help has
become very long, it is too noisy to dump the complete help text
for each typo after the error message itself.
Replace osnoise_hist_usage("...") with fatal("...") on errors.
Remove the already unused 'usage' argument from osnoise_hist_usage().
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Link: https://lore.kernel.org/r/20251011082738.173670-6-costa.shul@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
A long time ago, when the usage help was short, it was a favor
to the user to show it on error. Now that the usage help has
become very long, it is too noisy to dump the complete help text
for each typo after the error message itself.
Replace osnoise_top_usage("...") with fatal("...") on errors.
Remove the already unused 'usage' argument from osnoise_top_usage().
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Link: https://lore.kernel.org/r/20251011082738.173670-5-costa.shul@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
A long time ago, when the usage help was short, it was a favor
to the user to show it on error. Now that the usage help has
become very long, it is too noisy to dump the complete help text
for each typo after the error message itself.
Replace timerlat_hist_usage("...\n") with fatal("...") on errors.
Remove the already unused 'usage' argument from timerlat_hist_usage().
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Link: https://lore.kernel.org/r/20251011082738.173670-4-costa.shul@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
A long time ago, when the usage help was short, it was a favor
to the user to show it on error. Now that the usage help has
become very long, it is too noisy to dump the complete help text
for each typo after the error message itself.
Replace timerlat_top_usage("...\n") with fatal("...") on errors.
Remove the already unused 'usage' argument from timerlat_top_usage().
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Link: https://lore.kernel.org/r/20251011082738.173670-3-costa.shul@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
The code contains some technical debt in error handling,
which complicates the consolidation of duplicated code.
Introduce an fatal() function to replace the common pattern of
err_msg() followed by exit(EXIT_FAILURE), reducing the length of an
already long function.
Further patches using fatal() follow.
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Link: https://lore.kernel.org/r/20251011082738.173670-2-costa.shul@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
osnoise test "top stop at failed action" is calling timerlat instead of
osnoise by mistake.
Fix it so that it calls the correct RTLA subcommand.
Fixes: 05b7e10687 ("tools/rtla: Add remaining support for osnoise actions")
Reviewed-by: Wander Lairson Costa <wander@redhat.com>
Link: https://lore.kernel.org/r/20251007095341.186923-3-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
In non-BPF mode, it takes up to 1 second for RTLA to notice that tracing
has been stopped. That means that action tests cannot have a 1 second
duration, as the SIGALRM will be racing with the threshold overflow.
Previously, non-BPF mode actions were buggy and always executed
the action, even when stopping on duration or SIGINT, preventing
this issue from manifesting. Now that this has been fixed, the tests
have become flaky, and this has to be adjusted.
Fixes: 4e26f84abf ("rtla/tests: Add tests for actions")
Fixes: 05b7e10687 ("tools/rtla: Add remaining support for osnoise actions")
Reviewed-by: Wander Lairson Costa <wander@redhat.com>
Link: https://lore.kernel.org/r/20251007095341.186923-2-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Setting KVM_CAP_S390_USER_OPEREXEC will forward all operation
exceptions to user space. This also includes the 0x0000 instructions
managed by KVM_CAP_S390_USER_INSTR0. It's helpful if user space wants
to emulate instructions which do not (yet) have an opcode.
While we're at it refine the documentation for
KVM_CAP_S390_USER_INSTR0.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
This reverts commit 9c7dc1dd89.
The check-function-names.sh script now provides the function name
checking functionality for all architectures, making the objtool check
redundant.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/c7d549d4de8bd1490d106b99630eea5efc69a4dd.1763669451.git.jpoimboe@kernel.org
Commit 9c7dc1dd89 ("objtool: Warn on functions with ambiguous
-ffunction-sections section names") only works for drivers which are
compiled on architectures supported by objtool.
Make a script to perform the same check for all architectures.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/a6a49644a34964f7e02f3a8ce43af03e72817180.1763669451.git.jpoimboe@kernel.org
When compiled with -ffunction-sections (e.g., for LTO, livepatch, dead
code elimination, AutoFDO, or Propeller), the startup() function gets
compiled into the .text.startup section (or in some cases
.text.startup.constprop.0 or .text.startup.isra.0).
However, the .text.startup and .text.startup.* sections are also used by
the compiler for __attribute__((constructor)) code.
This naming conflict causes the vmlinux linker script to wrongly place
startup() function code in .init.text, which gets freed during boot.
Some builds have a mix of objects, both with and without
-ffunctions-sections, so it's not possible for the linker script to
disambiguate with #ifdef CONFIG_FUNCTION_SECTIONS or similar. This
means that "startup" unfortunately needs to be prohibited as a function
name.
Rename startup() to startup_hw(). For consistency, also rename its
shutdown() counterpart to shutdown_hw().
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/f0ee750f35c878172cc09916a0724b74e62eadc2.1763669451.git.jpoimboe@kernel.org
When compiled with -ffunction-sections (e.g., for LTO, livepatch, dead
code elimination, AutoFDO, or Propeller), the startup() function gets
compiled into the .text.startup section (or in some cases
.text.startup.constprop.0 or .text.startup.isra.0).
However, the .text.startup and .text.startup.* sections are also used by
the compiler for __attribute__((constructor)) code.
This naming conflict causes the vmlinux linker script to wrongly place
startup() function code in .init.text, which gets freed during boot.
Some builds have a mix of objects, both with and without
-ffunctions-sections, so it's not possible for the linker script to
disambiguate with #ifdef CONFIG_FUNCTION_SECTIONS or similar. This
means that "startup" unfortunately needs to be prohibited as a function
name.
Rename startup() to rs_startup(). For consistency, also rename its
shutdown() counterpart to rs_shutdown().
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/9e56afff5268b0b12b99a8aa9bf244d6ebdcdf47.1763669451.git.jpoimboe@kernel.org
When compiled with -ffunction-sections (e.g., for LTO, livepatch, dead
code elimination, AutoFDO, or Propeller), the startup() function gets
compiled into the .text.startup section (or in some cases
.text.startup.constprop.0 or .text.startup.isra.0).
However, the .text.startup and .text.startup.* sections are also used by
the compiler for __attribute__((constructor)) code.
This naming conflict causes the vmlinux linker script to wrongly place
startup() function code in .init.text, which gets freed during boot.
Some builds have a mix of objects, both with and without
-ffunctions-sections, so it's not possible for the linker script to
disambiguate with #ifdef CONFIG_FUNCTION_SECTIONS or similar. This
means that "startup" unfortunately needs to be prohibited as a function
name.
Rename startup() to gc2235_startup().
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/d28103a6edf7beceb5e3c6fa24e49dbad1350389.1763669451.git.jpoimboe@kernel.org
When compiled with -ffunction-sections (e.g., for LTO, livepatch, dead
code elimination, AutoFDO, or Propeller), the startup() function gets
compiled into the .text.startup section (or in some cases
.text.startup.constprop.0 or .text.startup.isra.0).
However, the .text.startup and .text.startup.* sections are also used by
the compiler for __attribute__((constructor)) code.
This naming conflict causes the vmlinux linker script to wrongly place
startup() function code in .init.text, which gets freed during boot.
Some builds have a mix of objects, both with and without
-ffunctions-sections, so it's not possible for the linker script to
disambiguate with #ifdef CONFIG_FUNCTION_SECTIONS or similar. This
means that "startup" unfortunately needs to be prohibited as a function
name.
Rename startup() to icom_startup(). For consistency, also rename its
shutdown() counterpart to icom_shutdown().
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/1aee9ef69f9d40405676712b34f0c397706e7023.1763669451.git.jpoimboe@kernel.org
The .cold function parent/child correlation logic has two passes: one in
read_symbols() and one in add_jump_destinations().
The second pass was added with commit cd77849a69 ("objtool: Fix GCC 8
cold subfunction detection for aliased functions") to ensure that if the
parent symbol had aliases then the canonical symbol was chosen as the
parent.
That solution was rather clunky, not to mention incomplete due to the
existence of alternatives and switch tables. Now that we have
sym->alias, the canonical alias fix can be done much simpler in the
first pass, making the second pass obsolete.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/bdab245a38000a5407f663a031f39e14c67a43d4.1763671318.git.jpoimboe@kernel.org
When symbol alias ambiguity exists in the symbol finding helper
functions, return the canonical sym->alias, as that's the one which gets
used by validate_branch() and elsewhere.
This doesn't fix any known issues, just makes the symbol alias behavior
more robust.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/450470a4897706af77453ad333e18af5ebab653c.1763671318.git.jpoimboe@kernel.org
Objtool is mistakenly aliasing all undefined symbols. That's obviously
wrong, though it has no consequence since objtool happens to only use
sym->alias for defined symbols. Fix it regardless.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/bc401173a7717757eee672fc1ca5a20451d77b86.1763671318.git.jpoimboe@kernel.org
The objtool .cold child/parent correlation is done in two phases: first
in elf_add_symbol() and later in add_jump_destinations().
The first phase is rather crude and can pick the wrong parent if there
are duplicates with the same name.
The second phase usually fixes that, but only if the parent has a direct
jump to the child. It does *not* work if the only branch from the
parent to the child is an alternative or jump table entry.
Make the first phase more robust by looking for the parent in the same
STT_FILE as the child.
Fixes the following objtool warnings in an AutoFDO build with a large
CLANG_AUTOFDO_PROFILE profile:
vmlinux.o: warning: objtool: rdev_add_key() falls through to next function rdev_add_key.cold()
vmlinux.o: warning: objtool: rdev_set_default_key() falls through to next function rdev_set_default_key.cold()
Fixes: 13810435b9 ("objtool: Support GCC 8's cold subfunctions")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/82c7b52e40efa75dd10e1c550cc75c1ce10ac2c9.1763671318.git.jpoimboe@kernel.org
AutoFDO enables -fsplit-machine-functions which can move the cold parts
of a function to a <func>.cold symbol in a .text.split.<func> section.
Unlike GCC, the Clang <func>.cold symbols are not marked STT_FUNC. This
confuses objtool in several ways, resulting in warnings like the
following:
vmlinux.o: warning: objtool: apply_retpolines.cold+0xfc: unsupported instruction in callable function
vmlinux.o: warning: objtool: machine_check_poll.cold+0x2e: unsupported instruction in callable function
vmlinux.o: warning: objtool: free_deferred_objects.cold+0x1f: relocation to !ENDBR: free_deferred_objects.cold+0x26
vmlinux.o: warning: objtool: rpm_idle.cold+0xe0: relocation to !ENDBR: rpm_idle.cold+0xe7
vmlinux.o: warning: objtool: tcp_rcv_state_process.cold+0x1c: relocation to !ENDBR: tcp_rcv_state_process.cold+0x23
Fix it by marking the .cold symbols as STT_FUNC.
Fixes: 2fd65f7afd ("AutoFDO: Enable machine function split optimization for AutoFDO")
Closes: https://lore.kernel.org/20251103215244.2080638-2-xur@google.com
Reported-by: Rong Xu <xur@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: xur@google.com
Tested-by: xur@google.com
Link: https://patch.msgid.link/20a67326f04b2a361c031b56d58e8a803b3c5893.1763671318.git.jpoimboe@kernel.org
There are two kernel-doc like descriptions at cper, which is used
by other parts of cper and on ghes driver. They both have kernel-doc
like descriptions.
Change the tags for them to be actual kernel-doc tags and add them
to the driver-api documentaion at the UEFI section.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Up to UEFI spec 2.9, the type byte of CPER struct for ARM processor
was defined simply as:
Type at byte offset 4:
- Cache error
- TLB Error
- Bus Error
- Micro-architectural Error
All other values are reserved
Yet, there was no information about how this would be encoded.
Spec 2.9A errata corrected it by defining:
- Bit 1 - Cache Error
- Bit 2 - TLB Error
- Bit 3 - Bus Error
- Bit 4 - Micro-architectural Error
All other values are reserved
That actually aligns with the values already defined on older
versions at N.2.4.1. Generic Processor Error Section.
Spec 2.10 also preserve the same encoding as 2.9A.
Adjust CPER and GHES handling code for both generic and ARM
processors to properly handle UEFI 2.9A and 2.10 encoding.
Link: https://uefi.org/specs/UEFI/2.10/Apx_N_Common_Platform_Error_Record.html#arm-processor-error-information
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Compiling with W=1 with werror enabled produces an error:
drivers/firmware/efi/cper-arm.c: In function ‘cper_print_proc_arm’:
drivers/firmware/efi/cper-arm.c:298:64: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=]
298 | snprintf(infopfx, sizeof(infopfx), "%s ", newpfx);
| ^
drivers/firmware/efi/cper-arm.c:298:25: note: ‘snprintf’ output between 2 and 65 bytes into a destination of size 64
298 | snprintf(infopfx, sizeof(infopfx), "%s ", newpfx);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
As the logic there adds an space at the end of infopx buffer.
Add an extra space to avoid such warning.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The ARM processor CPER record was added in UEFI v2.6 and remained
unchanged up to v2.10.
Yet, the original arm_event trace code added by
e9279e83ad ("trace, ras: add ARM processor error trace event")
is incomplete, as it only traces some fields of UAPI 2.6 table N.16, not
exporting any information from tables N.17 to N.29 of the record.
This is not enough for the user to be able to figure out what has
exactly happened or to take appropriate action.
According to the UEFI v2.9 specification chapter N2.4.4, the ARM
processor error section includes:
- several (ERR_INFO_NUM) ARM processor error information structures
(Tables N.17 to N.20);
- several (CONTEXT_INFO_NUM) ARM processor context information
structures (Tables N.21 to N.29);
- several vendor specific error information structures. The
size is given by Section Length minus the size of the other
fields.
In addition, it also exports two fields that are parsed by the GHES
driver when firmware reports it, e.g.:
- error severity
- CPU logical index
Report all of these information to userspace via a the ARM tracepoint so
that userspace can properly record the error and take decisions related
to CPU core isolation according to error severity and other info.
The updated ARM trace event now contains the following fields:
====================================== =============================
UEFI field on table N.16 ARM Processor trace fields
====================================== =============================
Validation handled when filling data for
affinity MPIDR and running
state.
ERR_INFO_NUM pei_len
CONTEXT_INFO_NUM ctx_len
Section Length indirectly reported by
pei_len, ctx_len and oem_len
Error affinity level affinity
MPIDR_EL1 mpidr
MIDR_EL1 midr
Running State running_state
PSCI State psci_state
Processor Error Information Structure pei_err - count at pei_len
Processor Context ctx_err- count at ctx_len
Vendor Specific Error Info oem - count at oem_len
====================================== =============================
It should be noted that decoding of tables N.17 to N.29, if needed, will
be handled in userspace. That gives more flexibility, as there won't be
any need to flood the kernel with micro-architecture specific error
decoding.
Also, decoding the other fields require a complex logic, and should be
done for each of the several values inside the record field. So, let
userspace daemons like rasdaemon decode them, parsing such tables and
having vendor-specific micro-architecture-specific decoders.
[mchehab: modified description, solved merge conflicts and fixed coding style]
Signed-off-by: Jason Tian <jason@os.amperecomputing.com>
Co-developed-by: Shengwei Luo <luoshengwei@huawei.com>
Signed-off-by: Shengwei Luo <luoshengwei@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Daniel Ferguson <danielf@os.amperecomputing.com> # rebased
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Shiju Jose <shiju.jose@huawei.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Fixes: e9279e83ad ("trace, ras: add ARM processor error trace event")
Link: https://uefi.org/specs/UEFI/2.10/Apx_N_Common_Platform_Error_Record.html#arm-processor-error-section
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Use a helper to shrink the code and separate the user and kernel slabs for
better security.
While at it lets remove the useless debug message.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20251112092732.23584-1-tvrtko.ursulin@igalia.com
In xe_oa_add_config_ioctl(), we accessed oa_config->id after dropping
metrics_lock. Since this lock protects the lifetime of oa_config, an
attacker could guess the id and call xe_oa_remove_config_ioctl() with
perfect timing, freeing oa_config before we dereference it, leading to
a potential use-after-free.
Fix this by caching the id in a local variable while holding the lock.
v2: (Matt A)
- Dropped mutex_unlock(&oa->metrics_lock) ordering change from
xe_oa_remove_config_ioctl()
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6614
Fixes: cdf02fe1a9 ("drm/xe/oa/uapi: Add/remove OA config perf ops")
Cc: <stable@vger.kernel.org> # v6.11+
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Sanjay Yadav <sanjay.kumar.yadav@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patch.msgid.link/20251118114859.3379952-2-sanjay.kumar.yadav@intel.com
(cherry picked from commit 28aeaed130)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
The code incorrectly assumes that the VRAM save/restore fence is valid.
Fix it by checking for error.
Fixes: 49cf1b9b60 ("drm/xe/pf: Handle VRAM migration data as part of PF control")
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251114122339.1791026-1-michal.winiarski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
(cherry picked from commit 78ff838a8a)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
The reference is only dropped on error. Fix it by adding the missing
xe_bo_put().
Fixes: 49cf1b9b60 ("drm/xe/pf: Handle VRAM migration data as part of PF control")
Reported-by: Adam Miszczak <adam.miszczak@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patch.msgid.link/20251114100713.1776073-1-michal.winiarski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
(cherry picked from commit dab751b424)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
The kernel-doc for xe_sriov_pf_migration_save_consume() contained
multiple "Return:" sections, causing a warning.
Fix it by removing the extra line.
Fixes: 67df4a5cbc ("drm/xe/pf: Add data structures and handlers for migration rings")
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20251114134030.1795947-1-michal.winiarski@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 562b0f254d)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
40 MHz support is hidden behind the ht40_2g module parameter with
this comment:
/*
* Some APs will negotiate HT20_40 in a noisy environment leading
* to miserable performance. Rather than defaulting to this, only
* enable it if explicitly requested at module load time.
*/
This parameter was added in commit 26f1fad29a ("New driver:
rtl8xxxu (mac80211)"). Back then rtl8xxxu only supported RTL8723AU
and the RTL8192CU family. It's entirely possible the miserable
performance was due to mistakes in the channel switching function,
which were fixed in a previous patch.
Delete the ht40_2g module parameter. If someone still needs to
disable 40 MHz support, cfg80211 has the module parameter
cfg80211_disable_40mhz_24ghz. That works too.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/4f053103-adfd-4ead-acb3-ef69127a4bab@gmail.com
The other chips report the RX channel width in the RX descriptor,
but this one doesn't.
Get the RX channel width from the PHY status.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/1c6c1fd4-92f6-4327-a24e-f0747ab21819@gmail.com
