i.MX95 USB2 inside HSIOMIX could still wakeup Linux, even if HSIOMIX
power domain(Digital logic) is off. There is still always on logic
have the wakeup capability which is out band wakeup capbility.
So use device_set_out_band_wakeup for i.MX95 to make sure usb2 could
wakeup system even if HSIOMIX power domain is in off state.
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
When add a platform device by calling ci_hdrc_add_device(), this device
will reuse OF node of its parent device. If power-domains property is
provided in the OF node, both two platform devices will be attached to
the same power domain. This should be unnecessary and may bring other
inconsistent behavior. For example, to support wakeup capability, these
two platform device need different power domain state. The parent device
need NOT power domain on for out-band interrupt, but the ci_hdrc device
need power domain on for in-band interrupt. The i.MX95 Soc support
out-band wakeup interrupt, the user need to enable wakeup for the parent
device, but if the user also enable wakeup for ci_hdrc device, the power
domain will keep at on state finally. To exclude such inconsistent
behavior and simplify the power management, detach power domain for ci_hdrc
platform device.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Currently, if a device is configured as a system wakeup source, the PM
domain core avoids powering off its power domain during system-wide
suspend. However, this can lead to unnecessary power consumption,
especially for devices whose wakeup logic resides in an always-on domain,
i.e., devices with out-of-band wakeup capability.
To address this, add a check for device_out_band_wakeup() in
genpd_finish_suspend(). If the device supports out-of-band wakeup, its
power domain can be safely powered off, just like regular devices without
wakeup enabled. And same check in genpd_finish_resume().
This change improves power efficiency without compromising wakeup
functionality.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Some devices can wake up the system from suspend even when their power
domains are turned off. This is possible because their system-wakeup logic
resides in an always-on power domain - indicating that they support
out-of-band system wakeup.
Currently, PM domain core doesn't power off such devices if they are marked
as system wakeup sources. To better represent devices with out-of-band
wakeup capability, this patch introduces a new flag out_band_wakeup in
'struct dev_pm_info'.
Two helper APIs are added:
- device_set_out_band_wakeup() - to mark a device as having out-of-band
wakeup capability.
- device_out_band_wakeup() - to query the flag.
Allow the PM core and drivers to distinguish between regular and
out-of-band wakeup sources, enable more accurate power management decision.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Use scsi_device_busy() instead of open-coding it. This patch prepares
for skipping the SCSI device budget map initialization in certain cases.
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251113235252.2015185-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Merge the immutable branch dt into next, to allow the DT bindings to be
tested together with changes that are targeted for v6.19.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Unfortunately the MAD_DIMM DIMM_S and DIMM_L bits on ICL are
not idential, so we are currently decoding DIMM_S incorrectly.
Fix the problem by defining the DIMM_S and DIMM_L bits separately.
And for consistency do that same for SKL, even though there the
bits do match between the two DIMMs. The result is rather
repetitive in places, but I didn't feel like obfuscatign things
with cpp macros/etc.
Broken decoding on Dell XPS 13 7390 2-in-1:
CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no
CH0 DIMM S size: 32 Gb, width: X32, ranks: 3, 16Gb+ DIMMs: no
CH0 ranks: 2, 16Gb+ DIMMs: no
CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no
CH1 DIMM S size: 32 Gb, width: X32, ranks: 3, 16Gb+ DIMMs: no
CH1 ranks: 2, 16Gb+ DIMMs: no
Memory configuration is symmetric? no
Fixed decoding on Dell XPS 13 7390 2-in-1:
CH0 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no
CH0 DIMM S size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no
CH0 ranks: 2, 16Gb+ DIMMs: no
CH1 DIMM L size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no
CH1 DIMM S size: 32 Gb, width: X16, ranks: 2, 16Gb+ DIMMs: no
CH1 ranks: 2, 16Gb+ DIMMs: no
Memory configuration is symmetric? yes
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251029204215.12292-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Ensure that the verifiers are initialised before calling
d_splice_alias() in _nfs4_open_and_get_state().
Reported-by: Michael Stoler <michael.stoler@vastdata.com>
Fixes: cf5b4059ba ("NFSv4: Fix races between open and dentry revalidation")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Russell King says:
====================
net: stmmac: sanitise stmmac_is_jumbo_frm()
stmmac_is_jumbo_frm() takes skb->len, which is unsigned int, but the
parameter is passed as an "int" and then tested using signed
comparisons. This can cause bugs. Change the parameter to be unsigned.
Also arrange for it to return a bool.
====================
Link: https://patch.msgid.link/aRxDqJSWxOdOaRt4@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
stmmac_is_jumbo_frm() returns whether the driver considers the frame
size to be a jumbo frame, and thus returns 0/1 values. This is boolean,
so convert it to return a boolean and use false/true instead. Also
convert stmmac_xmit()'s is_jumbo to be bool, which causes several
variables to be repositioned to keep it in reverse Christmas-tree
order.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1vLIWW-0000000Ewkl-21Ia@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
stmmac_is_jumbo_frm() and the is_jumbo_frm() methods take skb->len
which is an unsigned int. Avoid an implicit cast to "int" via the
method parameter and then incorrectly doing signed comparisons on
this unsigned value.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1vLIWR-0000000Ewkf-1Tdx@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
priv->sph* only have 'true' and 'false' used with them, yet they are an
int. Change their type to a bool, and rename to make their usage more
clear.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1vLIDN-0000000Evur-2NLU@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pause, Asym_Pause and Autoneg bits are not set when pl->supported is
initialized, so these link modes will not work for the fixed-link. This
leads to a TCP performance degradation issue observed on the i.MX943
platform.
The switch CPU port of i.MX943 is connected to an ENETC MAC, this link
is a fixed link and the link speed is 2.5Gbps. And one of the switch
user ports is the RGMII interface, and its link speed is 1Gbps. If the
flow-control of the fixed link is not enabled, we can easily observe
the iperf performance of TCP packets is very low. Because the inbound
rate on the CPU port is greater than the outbound rate on the user port,
the switch is prone to congestion, leading to the loss of some TCP
packets and requiring multiple retransmissions.
Solving this problem should be as simple as setting the Asym_Pause and
Pause bits. The reason why the Autoneg bit needs to be set, Russell
has gave a very good explanation in the thread [1], see below.
"As the advertising and lp_advertising bitmasks have to be non-empty,
and the swphy reports aneg capable, aneg complete, and AN enabled, then
for consistency with that state, Autoneg should be set. This is how it
was prior to the blamed commit."
Fixes: de7d3f87be ("net: phylink: Use phy_caps_lookup for fixed-link configuration")
Link: https://lore.kernel.org/aRjqLN8eQDIQfBjS@shell.armlinux.org.uk # [1]
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20251117102943.1862680-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The "soft-reserved" memory regions (EFI_MEMORY_SP) are added to the
memblock.reserved, but not to the memblock.memory. It causes
memblock_estimated_nr_free_pages() to return a value smaller value than
expected, or if it underflows, an extremely large value.
Calculate the number of estimated free pages using
memblock_reserved_kern_size() instead of memblock_reserved_size() to fix
the issue.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAmkda44QHHJwcHRAa2Vy
bmVsLm9yZwAKCRA5A4Ymyw79kWR1B/0XkJdjP2gH7fxnAZc2h2f3zsRQP/70Hcgr
xJy7UE7+2e6KWLzl8vcI4Oyr+7cRbtAa6AYfk2HTcIP+M2Af34kzVgLZceuAW/zr
bpyaNV7t23CcQwtY+6etGM2Nlzw6lTi/BF+EAS+rcgx5lrKJ0wpACm/1tplU3nJB
DKfumkJgQt02tgwBByXB0SXUjcntiQ/uEWm27EJvD6YTDOprt9316G+7GPRPVaOy
y0Se9dFqZ7xWP2sWWwYiSyS57fPgBSB7+XR8/bnsutib8GvA6AmYUaJdo5MavlYZ
mz3ZHmvjb0acCDgvrV564RLp23lX29WPSvHFwrlyU4v1g5pDv4dt
=tr0l
-----END PGP SIGNATURE-----
Merge tag 'fixes-2025-11-19' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fix from Mike Rapoport:
"Fix memblock_estimated_nr_free_pages() for soft-reserved memory
The "soft-reserved" memory regions (EFI_MEMORY_SP) are added to the
memblock.reserved, but not to the memblock.memory. It causes
memblock_estimated_nr_free_pages() to return a value smaller value
than expected, or if it underflows, an extremely large value.
Calculate the number of estimated free pages using
memblock_reserved_kern_size() instead of memblock_reserved_size() to
fix the issue"
* tag 'fixes-2025-11-19' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: fix memblock_estimated_nr_free_pages() for soft-reserved memory
Add selftests to cbo.c to verify Zicbop extension behavior, and split
the previous `--sigill` mode into two options so they can be tested
independently.
The test checks:
- That hwprobe correctly reports Zicbop presence and block size.
- That prefetch instructions execute without exception on valid and NULL
addresses when Zicbop is present.
Signed-off-by: Yao Zihong <zihong.plct@isrc.iscas.ac.cn>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://patch.msgid.link/20251118162436.15485-3-zihong.plct@isrc.iscas.ac.cn
Signed-off-by: Paul Walmsley <pjw@kernel.org>
- Add `RISCV_HWPROBE_EXT_ZICBOP` to report the presence of the
Zicbop extension.
- Add `RISCV_HWPROBE_KEY_ZICBOP_BLOCK_SIZE` to expose the block
size (in bytes) when Zicbop is supported.
- Update hwprobe.rst to document the new extension bit and block
size key, following the existing Zicbom/Zicboz style.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Yao Zihong <zihong.plct@isrc.iscas.ac.cn>
Link: https://patch.msgid.link/20251118162436.15485-2-zihong.plct@isrc.iscas.ac.cn
[pjw@kernel.org: updated to apply]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Add a test case that does some basic verification of the Vector ptrace
interface. This forks a child process then using ptrace to inspect and
manipulate the v31 register of the child.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Andy Chiu <andybnac@gmail.com>
Tested-by: Andy Chiu <andybnac@gmail.com>
Link: https://patch.msgid.link/20251013091318.467864-3-yongxuan.wang@sifive.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
The vector regset uses the maximum possible vlen value to estimate the
.n field. But not all the hardwares support the maximum vlen. Linux
might wastes time to prepare a large memory buffer(about 2^6 pages) for
the vector regset.
The regset can only copy vector registers when the process are using
vector. Add .active callback and determine the n field of vector regset
in riscv_v_setup_ctx_cache() doesn't affect the ptrace syscall and
coredump. It can avoid oversized allocations and better matches real
hardware limits.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Andy Chiu <andybnac@gmail.com>
Tested-by: Andy Chiu <andybnac@gmail.com>
Link: https://patch.msgid.link/20251013091318.467864-2-yongxuan.wang@sifive.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Add RISC-V code to be compiled to allow the userspace raid6test program
to be built and run on RISC-V.
Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://patch.msgid.link/20250718072711.3865118-6-zhangchunyan@iscas.ac.cn
Signed-off-by: Paul Walmsley <pjw@kernel.org>
To support userspace raid6test, this patch adds __KERNEL__ ifdef for kernel
header inclusions also userspace wrapper definitions to allow code to be
compiled in userspace.
This patch also drops the NSIZE macro, instead of using the vector length,
which can work for both kernel and user space.
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Chunyan Zhang <zhangchunyan@iscas.ac.cn>
Link: https://patch.msgid.link/20250718072711.3865118-5-zhangchunyan@iscas.ac.cn
Signed-off-by: Paul Walmsley <pjw@kernel.org>
To prevent the compiler from breaking the inline vector assembly code,
this code must be built without compiler support for vector.
Signed-off-by: Chunyan Zhang <zhangchunyan@iscas.ac.cn>
Link: https://patch.msgid.link/20250718072711.3865118-4-zhangchunyan@iscas.ac.cn
[pjw@kernel.org: cleaned up commit message]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Use riscv_has_extension_likely() to check for RISCV_ISA_EXT_ZAWRS,
replacing the use of asm goto with ALTERNATIVE.
The "likely" variant is used to match the behavior of the original
implementation using ALTERNATIVE("j %l[no_zawrs]", "nop", ...).
Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn>
Link: https://patch.msgid.link/20251020-riscv-altn-helper-wip-v4-5-ef941c87669a@iscas.ac.cn
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Use riscv_has_extension_likely() to check for RISCV_ISA_EXT_ZBB,
replacing the use of asm goto with ALTERNATIVE.
The "likely" variant is used to match the behavior of the original
implementation using ALTERNATIVE("j %l[legacy]", "nop", ...).
Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn>
Link: https://patch.msgid.link/20251020-riscv-altn-helper-wip-v4-4-ef941c87669a@iscas.ac.cn
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Use riscv_has_extension_likely() to check for RISCV_ISA_EXT_ZBB,
replacing the use of asm goto with ALTERNATIVE.
The "likely" variant is used to match the behavior of the original
implementation using ALTERNATIVE("j %l[legacy]", "nop", ...).
Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn>
Link: https://patch.msgid.link/20251020-riscv-altn-helper-wip-v4-3-ef941c87669a@iscas.ac.cn
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Use riscv_has_extension_likely() to check for RISCV_ISA_EXT_ZBB,
replacing the use of asm goto with ALTERNATIVE.
The "likely" variant is used to match the behavior of the original
implementation using ALTERNATIVE("j %l[no_zbb]", "nop", ...).
While we're at it, also remove bogus comment about Zbb being likely
available. We have to choose between "likely" and "unlikely" due to
limitations of the asm goto feature, but that does not mean we should
put a bad comment on why we pick "likely" over "unlikely".
Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn>
Link: https://patch.msgid.link/20251020-riscv-altn-helper-wip-v4-2-ef941c87669a@iscas.ac.cn
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Use riscv_has_extension_unlikely() to check for RISCV_ISA_EXT_SVVPTC,
replacing the use of asm goto with ALTERNATIVE.
The "unlikely" variant is used to match the behavior of the original
implementation using ALTERNATIVE("nop", "j %l[svvptc]", ...).
Note that this makes the check for RISCV_ISA_EXT_SVVPTC a runtime one if
RISCV_ALTERNATIVE=n, but it should still be worthwhile to do so given
that TLB flushes are relatively slow.
Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn>
Link: https://patch.msgid.link/20251020-riscv-altn-helper-wip-v4-1-ef941c87669a@iscas.ac.cn
Signed-off-by: Paul Walmsley <pjw@kernel.org>
The core kernel already supports parallel bringup of secondary
CPUs (aka HOTPLUG_PARALLEL). The x86 and MIPS architectures
already use HOTPLUG_PARALLEL and ARM is also moving toward it.
On RISC-V, there is no arch specific global data accessed in the
RISC-V secondary CPU bringup path so enabling HOTPLUG_PARALLEL for
RISC-V would only require:
1) Providing RISC-V specific arch_cpuhp_kick_ap_alive()
2) Calling cpuhp_ap_sync_alive() from smp_callin()
This patch is tested natively with OpenSBI on QEMU RV64 virt machine
with 64 cores and also tested with KVM RISC-V guest with 32 VCPUs.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://patch.msgid.link/20250905122512.71684-1-apatel@ventanamicro.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Replace goto-based error handling with early return pattern in
imx_dsp_rproc_{start,stop}() functions, and simplify if-else logic.
No functional changes, only code structure improvements for better
maintainability.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20251119-imx-dsp-2025-11-19-v4-12-adafd342d07b@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
strcpy() has been deprecated [1] because it performs no bounds checking
on the destination buffer, which can lead to buffer overflows. Replace
it with the safer strscpy_pad(), and use kmalloc() instead of kzalloc()
because strscpy_pad() zero-pads the destination buffer and therefore
avoids writing to it twice.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strcpy [1]
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20251119135217.233084-1-thorsten.blum@linux.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is no user of enum imx_rproc_method after moved to ops based
method. Remove it.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Tested-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20251119-imx-dsp-2025-11-19-v4-11-adafd342d07b@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Introduce imx_dsp_rproc_reset_ctr_{start, stop, detect_mode}() helper
functions for i.MX variants using IMX_RPROC_RESET_CONTROLLER to manage
remote processors.
Allows the removal of the IMX_RPROC_RESET_CONTROLLER switch-case blocks
from imx_dsp_rproc_[start,stop,detect_mode](), resulting in cleaner and
more maintainable code.
No functional changes.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Tested-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20251119-imx-dsp-2025-11-19-v4-10-adafd342d07b@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Introduce imx_dsp_rproc_scu_api_{start, stop, detect_mode}() helper
functions for i.MX variants using IMX_RPROC_SCU_API to manage remote
processors.
Allows the removal of the IMX_RPROC_SCU_API switch-case blocks from
imx_dsp_rproc_[start,stop,detect_mode](), resulting in cleaner and more
maintainable code.
No functional changes.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Tested-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20251119-imx-dsp-2025-11-19-v4-9-adafd342d07b@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The panel operated in low-power mode, with exception of changing the
brightness levels.
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251119-sofef00-rebuild-v3-11-6cd55471e84e@ixit.cz
Compatible should correspond to the panel used and the driver currently
supports only AMS628NW01 panel. Adapt the internal driver structures to
reflect the name.
Original, not very descriptive, compatible is kept to ensure compatibility
with older device-trees.
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251119-sofef00-rebuild-v3-9-6cd55471e84e@ixit.cz
Initialising at max brightness is not necessary.
Half brightness is much more comfortable.
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251119-sofef00-rebuild-v3-8-6cd55471e84e@ixit.cz
This corrects the host initialisation sequence so that we can send
DSI/DCS commands in prepare().
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251119-sofef00-rebuild-v3-7-6cd55471e84e@ixit.cz
Introducing the macro make the code a bit clearer.
Looking at other Samsung drivers, I assume it's lvl2, thou due to not
available documentation it's only educated guess.
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251119-sofef00-rebuild-v3-6-6cd55471e84e@ixit.cz
It's not possible to send DSI panel commands in the .unprepare. Move it
to .disable and do similar for prepare, where we move the display on to
the .enable.
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251119-sofef00-rebuild-v3-5-6cd55471e84e@ixit.cz
Recently we documented, there is more than vddio regulator, adapt the
driver to work with VCI and POC regulator.
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251119-sofef00-rebuild-v3-4-6cd55471e84e@ixit.cz
