Ensure that the verifiers are initialised before calling
d_splice_alias() in nfs_atomic_open().
Reported-by: Michael Stoler <michael.stoler@vastdata.com>
Fixes: 809fd143de ("NFSv4: Ensure nfs_atomic_open set the dentry verifier on ENOENT")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Ensure that the verifiers are initialised before calling
d_splice_alias() in both nfs_prime_dcache() and nfs_lookup().
Reported-by: Michael Stoler <michael.stoler@vastdata.com>
Fixes: a1147b8281 ("NFS: Fix up directory verifier races")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Add and use a helper, kvm_load_xfeatures(), to dedup the code that loads
guest/host xfeatures.
Opportunistically return early if X86_CR4_OSXSAVE is not set to reduce
indentations.
No functional change intended.
Suggested-by: Chao Gao <chao.gao@intel.com>
Reviewed-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://patch.msgid.link/20251110050539.3398759-1-binbin.wu@linux.intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move KVM's swapping of PKRU outside of the fastpath loop, as there is no
KVM code anywhere in the fastpath that accesses guest/userspace memory,
i.e. that can consume protection keys.
As documented by commit 1be0e61c1f ("KVM, pkeys: save/restore PKRU when
guest/host switches"), KVM just needs to ensure the host's PKRU is loaded
when KVM (or the kernel at-large) may access userspace memory. And at the
time of commit 1be0e61c1f, KVM didn't have a fastpath, and PKU was
strictly contained to VMX, i.e. there was no reason to swap PKRU outside
of vmx_vcpu_run().
Over time, the "need" to swap PKRU close to VM-Enter was likely falsely
solidified by the association with XFEATUREs in commit 37486135d3
("KVM: x86: Fix pkru save/restore when guest CR4.PKE=0, move it to x86.c"),
and XFEATURE swapping was in turn moved close to VM-Enter/VM-Exit as a
KVM hack-a-fix ution for an #MC handler bug by commit 1811d979c7
("x86/kvm: move kvm_load/put_guest_xcr0 into atomic context").
Deferring the PKRU loads shaves ~40 cycles off the fastpath for Intel,
and ~60 cycles for AMD. E.g. using INVD in KVM-Unit-Test's vmexit.c,
with extra hacks to enable CR4.PKE and PKRU=(-1u & ~0x3), latency numbers
for AMD Turin go from ~1560 => ~1500, and for Intel Emerald Rapids, go
from ~810 => ~770.
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Reviewed-by: Jon Kohler <jon@nutanix.com>
Link: https://patch.msgid.link/20251118222328.2265758-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move KVM's swapping of XFEATURE masks, i.e. XCR0 and XSS, out of the
fastpath loop now that the guts of the #MC handler runs in task context,
i.e. won't invoke schedule() with preemption disabled and clobber state
(or crash the kernel) due to trying to context switch XSTATE with a mix
of host and guest state.
For all intents and purposes, this reverts commit 1811d979c7 ("x86/kvm:
move kvm_load/put_guest_xcr0 into atomic context"), which papered over an
egregious bug/flaw in the #MC handler where it would do schedule() even
though IRQs are disabled. E.g. the call stack from the commit:
kvm_load_guest_xcr0
...
kvm_x86_ops->run(vcpu)
vmx_vcpu_run
vmx_complete_atomic_exit
kvm_machine_check
do_machine_check
do_memory_failure
memory_failure
lock_page
Commit 1811d979c7 "fixed" the immediate issue of XRSTORS exploding, but
completely ignored that scheduling out a vCPU task while IRQs and
preemption is wildly broken. Thankfully, commit 5567d11c21 ("x86/mce:
Send #MC singal from task work") (somewhat incidentally?) fixed that flaw
by pushing the meat of the work to the user-return path, i.e. to task
context.
KVM has also hardened itself against #MC goofs by moving #MC forwarding to
kvm_x86_ops.handle_exit_irqoff(), i.e. out of the fastpath. While that's
by no means a robust fix, restoring as much state as possible before
handling the #MC will hopefully provide some measure of protection in the
event that #MC handling goes off the rails again.
Note, KVM always intercepts XCR0 writes for vCPUs without protected state,
e.g. there's no risk of consuming a stale XCR0 when determining if a PKRU
update is needed; kvm_load_host_xfeatures() only reads, and never writes,
vcpu->arch.xcr0.
Deferring the XCR0 and XSS loads shaves ~300 cycles off the fastpath for
Intel, and ~500 cycles for AMD. E.g. using INVD in KVM-Unit-Test's
vmexit.c, which an extra hack to enable CR4.OXSAVE, latency numbers for
AMD Turin go from ~2000 => 1500, and for Intel Emerald Rapids, go from
~1300 => ~1000.
Cc: Jon Kohler <jon@nutanix.com>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Reviewed-by: Jon Kohler <jon@nutanix.com>
Link: https://patch.msgid.link/20251118222328.2265758-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Handle Machine Checks (#MC) that happen on VM-Enter (VMX or TDX) outside
of KVM's fastpath so that as much host state as possible is re-loaded
before invoking the kernel's #MC handler. The only requirement is that
KVM invokes the #MC handler before enabling IRQs (and even that could
_probably_ be related to handling #MCs before enabling preemption).
Waiting to handle #MCs until "more" host state is loaded hardens KVM
against flaws in the #MC handler, which has historically been quite
brittle. E.g. prior to commit 5567d11c21 ("x86/mce: Send #MC singal from
task work"), the #MC code could trigger a schedule() with IRQs and
preemption disabled. That led to a KVM hack-a-fix in commit 1811d979c7
("x86/kvm: move kvm_load/put_guest_xcr0 into atomic context").
Note, vmx_handle_exit_irqoff() is common to VMX and TDX guests.
Cc: Tony Lindgren <tony.lindgren@linux.intel.com>
Cc: Rick Edgecombe <rick.p.edgecombe@intel.com>
Cc: Jon Kohler <jon@nutanix.com>
Reviewed-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Link: https://patch.msgid.link/20251118222328.2265758-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Since PCI device should not be abusing platform device, MFD parent to
platform child path is no longer being pursued for this driver. Convert
it to auxiliary driver, which will be used by EHL PSE auxiliary device.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20251112034040.457801-3-raag.jadav@intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Intel Elkhart Lake Programmable Service Engine (PSE) includes two PCI
devices that expose two different capabilities of GPIO and Timed I/O
as a single PCI function through shared MMIO with below layout.
GPIO: 0x0000 - 0x1000
TIO: 0x1000 - 0x2000
This driver enumerates the PCI parent device and creates auxiliary child
devices for these capabilities. The actual functionalities are provided
by their respective auxiliary drivers.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20251112034040.457801-2-raag.jadav@intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
ACPI 6.6 specification for EINJV2 appends an extra structure to
the end of the existing struct set_error_type_with_address.
Several issues showed up in testing.
1) Initialization was broken by an earlier fix [1] since is_v2 is only
set while performing an injection, not during initialization.
2) A buggy BIOS provided invalid "revision" and "length" for the
extension structure. Add several sanity checks.
3) When injecting legacy error types on an EINJV2 capable system,
don't copy the component arrays.
Fixes: 6c70585149 ("ACPI: APEI: EINJ: Check if user asked for EINJV2 injection") # [1]
Fixes: b47610296d ("ACPI: APEI: EINJ: Enable EINJv2 error injections")
Signed-off-by: Tony Luck <tony.luck@intel.com>
[ rjw: Changelog edits ]
Cc: 6.17+ <stable@vger.kernel.org> # 6.17+
Link: https://patch.msgid.link/20251119012712.178715-1-tony.luck@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
GPIOLIB is now aware of shared GPIOs and - for platforms where access to
such pins is managed internally - we don't need to keep track of the
enable count.
Once all users in the kernel switch to using the new mechanism, we'll be
able to drop the internal counting of users from the regulator code.
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20251112-gpio-shared-v4-10-b51f97b1abd8@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver is only used on Qualcomm platforms which now select
HAVE_SHARED_GPIOS so this flag can be dropped.
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20251112-gpio-shared-v4-9-b51f97b1abd8@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver is only used on Qualcomm platforms which now select
HAVE_SHARED_GPIOS so this flag can be dropped.
Reviewed-and-tested-by: Alexey Klimov <alexey.klimov@linaro.org> # RB3
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20251112-gpio-shared-v4-8-b51f97b1abd8@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
MTL+ platforms are supported by dpll framework remove a separate
check for hw comparison and rely solely on dpll framework
hw comparison.
Finally, all required hooks are now in place so initialize
PLL manager for MTL+ platforms and remove the redirections
to the legacy code paths from the following interfaces:
* intel_encoder::clock_enable/disable()
* intel_encoder::get_config()
* intel_dpll_funcs::get_hw_state()
* intel_ddi_update_active_dpll()
* pipe_config_pll_mismatch()
v2: Rebase on !HAS_LT_PHY check in intel_ddi_update_active_dpll()
v3: Rebase on !display->dpll.mgr check in intel_ddi_update_active_dpll()
Add check for NVL as the platform is not part of pll framework (Suraj)
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20251118132859.2584452-1-mika.kahola@intel.com
Add the PLL hooks for the TBT PLL on MTL+. These are simple stubs
similarly to the TBT PLL on earlier platforms, since this PLL is always
on from the display POV - so no PLL enable/disable programming is
required as opposed to the non-TBT PLLs - and the clocks for different
link rates are enabled/disabled at a different level, via the
intel_encoder::enable_clock()/disable_clock() interface.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20251117104602.2363671-32-mika.kahola@intel.com
For DDI initialization get encoder configuration for C10 and C20
chips.
v2: Get configuration either for a C10 or on the PTL port B
eDP on TypeC PHY case for a C20 PHY PLL. Hence refer to this
case as "non_tc_phy" instead of "c10phy".
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20251117104602.2363671-31-mika.kahola@intel.com
To enable pll clock on DDI move part of the pll enabling
sequence into a ddi clock enabling function.
Simililarly, do the same for pll disabling sequence.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20251117104602.2363671-30-mika.kahola@intel.com
Add .dump_hw_state function pointer for MTL+ platforms
to support dpll framework. While at it, switch to use
drm_printer structure to print hw state information.
v2: Keep debug messages on one line if they not
necessarily needed to split into two or more
lines (Suraj)
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20251117104602.2363671-24-mika.kahola@intel.com
Add .update_dpll_ref_clks function pointer to MTL+
platforms to support dpll framework. Reuse ICL
function pointer.
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20251117104602.2363671-23-mika.kahola@intel.com
Add .update_active_dpll function pointer to support
dpll framework. Reuse ICL function pointer.
v2: Add check for !HAS_LT_PHY (Suraj)
v3: Remove the incorrect !HAS_LT_PHY condition and
check for existing dpll_mgr
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> # v1
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20251118132830.2584422-1-mika.kahola@intel.com
Add .get_dplls function pointer for MTL+ platforms
to support dpll framework. Reuse the ICL function
pointer.
v2: Getting configuration either for a C10 or on the PTL port B
eDP on TypeC PHY case for a C20 PHY PLL. Hence refer to this
case as "non_tc_phy" instead of "c10phy".
v3: Fix comment to "eDP over TypeC" (Suraj)
Fix pll id as separate variable (Suraj)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20251117104602.2363671-20-mika.kahola@intel.com
Use %ptSp instead of open coded variants to print content of
struct timespec64 in human readable format.
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251113150217.3030010-22-andriy.shevchenko@linux.intel.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Use %ptSp instead of open coded variants to print content of
struct timespec64 in human readable format.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Karan Tilak Kumar <kartilak@cisco.com>
Link: https://patch.msgid.link/20251113150217.3030010-21-andriy.shevchenko@linux.intel.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
This commit adds a pre-check in ASoC to ensure there are non-zero CPU or
codec DAIs. It also handles early failure of memory allocation for
rtd->dais by going to the cleanup path, preventing potential issues
from invalid configurations or out-of-memory situations.
Signed-off-by: jempty.liang <imntjempty@163.com>
Link: https://patch.msgid.link/20251119101116.78676-1-imntjempty@163.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To bring MTL+ platform aligned call and calculate PLL state
from dpll framework.
v2: Rename mtl_compute_c10phy_dpll() to mtl_compute_non_tc_phy_dpll().
The state is computed either for a C10 or on the PTL port B eDP
over TypeC PHY case for a C20 PHY PLL. Hence refer to this case as
"non_tc_phy" instead of "c10phy".
Rename mtl_compute_c20phy_dplls() to mtl_compute_tc_phy_dplls() for
symmetry with mtl_compute_non_tc_phy_dpll().
v3: Reword commit message (Suraj)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20251117104602.2363671-19-mika.kahola@intel.com
Use %ptSp instead of open coded variants to print content of
struct timespec64 in human readable format.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Karan Tilak Kumar <kartilak@cisco.com>
Link: https://patch.msgid.link/20251113150217.3030010-20-andriy.shevchenko@linux.intel.com
[pmladek@suse.com: Fixed output ordering and last_read_time update.]
Signed-off-by: Petr Mladek <pmladek@suse.com>
Use %ptSp instead of open coded variants to print content of
struct timespec64 in human readable format.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://patch.msgid.link/20251113150217.3030010-19-andriy.shevchenko@linux.intel.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Use %ptSp instead of open coded variants to print content of
struct timespec64 in human readable format.
While at it, fix wrong use of %ptT against struct timespec64.
It's kinda lucky that it worked just because the first member
there 64-bit and it's of time64_t type. Now with %ptS it may
be used correctly.
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251113150217.3030010-18-andriy.shevchenko@linux.intel.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Use %ptSp instead of open coded variants to print content of
struct timespec64 in human readable format.
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251113150217.3030010-17-andriy.shevchenko@linux.intel.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Use %ptSp instead of open coded variants to print content of
struct timespec64 in human readable format.
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251113150217.3030010-16-andriy.shevchenko@linux.intel.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Use %ptSp instead of open coded variants to print content of
struct timespec64 in human readable format.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20251113150217.3030010-15-andriy.shevchenko@linux.intel.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Use %ptSp instead of open coded variants to print content of
struct timespec64 in human readable format.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/20251113150217.3030010-14-andriy.shevchenko@linux.intel.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Use %ptSp instead of open coded variants to print content of
struct timespec64 in human readable format.
Acked-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251113150217.3030010-13-andriy.shevchenko@linux.intel.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Use %ptSp instead of open coded variants to print content of
struct timespec64 in human readable format.
Acked-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251113150217.3030010-12-andriy.shevchenko@linux.intel.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Use %ptSp instead of open coded variants to print content of
struct timespec64 in human readable format.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251113150217.3030010-11-andriy.shevchenko@linux.intel.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Use %ptSp instead of open coded variants to print content of
struct timespec64 in human readable format.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251113150217.3030010-10-andriy.shevchenko@linux.intel.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Use %ptSp instead of open coded variants to print content of
struct timespec64 in human readable format.
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251113150217.3030010-9-andriy.shevchenko@linux.intel.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Use %ptSp instead of open coded variants to print content of
struct timespec64 in human readable format.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251113150217.3030010-8-andriy.shevchenko@linux.intel.com
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Update several functions in intel_cx0_phy.c to make PLL state
management more explicit.
Changes include
* add 'const' qualifiers to intel_crtc_state parameter for
cx0 state calculation functions
* refactor C10/C20 PLL state calculations helpers to take
explicit hardware state pointers instead of directly modifying
'crtc_state->dpll_hw_state'
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20251117104602.2363671-18-mika.kahola@intel.com
Start bringing MTL+ platforms as part of PLL framework.
The work is started by adding PLL information and related
function hooks.
BSpec: 55726
v2: Revise commit message and add BSpec ID (Suraj)
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20251117104602.2363671-17-mika.kahola@intel.com
When pll's are moved to dpll framework we no longer
need Cx0 specific state verification as we can rely
on dpll state verification instead.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20251117104602.2363671-16-mika.kahola@intel.com
Print all the Cx0 PLL state in the PLL state dumper.
v2: Use BUILD_BUG_ON() instead of WARN_ON() (Jani)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20251117104602.2363671-15-mika.kahola@intel.com
Ensure Cx0 pll state is initialized to zero before any computation or HW
readouts, to prevent leaving some parameter in the state uninitialized
in the actual compute/HW readout functions later.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20251117104602.2363671-14-mika.kahola@intel.com
The port clock is tracked in the PLL state, so there is no need to pass
it separately to __intel_cx0pll_enable(). Drop the port clock function
param accordingly.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20251117104602.2363671-13-mika.kahola@intel.com
