The helper function blk_zone_wp_offset() is called from
disk_zone_wplug_sync_wp_offset(), and again called from
blk_revalidate_seq_zone() right after the call to
disk_zone_wplug_sync_wp_offset().
Change disk_zone_wplug_sync_wp_offset() to return the value of obtained
with blk_zone_wp_offset() to avoid this double call, which simplifies a
little blk_revalidate_seq_zone().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_zone_wp_offset() is always called with a struct blk_zone obtained
from the device, that is, it will never see the BLK_ZONE_COND_ACTIVE
condition. However, handling this condition makes this function more
solid and will also avoid issues when propagating cached report requests
to underlying stacked devices is implemented. Add BLK_ZONE_COND_ACTIVE
as a new case in blk_zone_wp_offset() switch.
Also while at it, change the handling of the full condition to return
UINT_MAX for the zone write pointer to reflect the fact that the write
pointer of a full zone is invalid.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The HPA to DPA translation for poison injection assumes that the
base address starts from where the CXL region begins. When the
extended linear cache is active, the offset can be within the DRAM
region. Adjust the offset so that it correctly reflects the offset
within the CXL region.
[ dj: Add fixes tag from Alison ]
Fixes: c3dd67681c ("cxl/region: Add inject and clear poison by region offset")
Link: https://patch.msgid.link/20251031173224.3537030-5-dave.jiang@intel.com
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
SMB2_change_notify called smb2_validate_iov() but ignored the return
code, then kmemdup()ed using server provided OutputBufferOffset/Length.
Check the return of smb2_validate_iov() and bail out on error.
Discovered with help from the ZeroPath security tooling.
Signed-off-by: Joshua Rogers <linux@joshua.hu>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Cc: stable@vger.kernel.org
Fixes: e3e9463414 ("smb3: improve SMB3 change notification support")
Signed-off-by: Steve French <stfrench@microsoft.com>
- use the firmware node of the GPIO chip, not its label for software
node lookup
- fix invalid pointer access in GPIO debugfs
- drop unused functions from gpio-tb10x
- fix a regression in gpio-aggregator: restore the set_config() callback
in the driver
- correct schema $id path in ti,twl4030 DT bindings
-----BEGIN PGP SIGNATURE-----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=4JGk
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- use the firmware node of the GPIO chip, not its label for software
node lookup
- fix invalid pointer access in GPIO debugfs
- drop unused functions from gpio-tb10x
- fix a regression in gpio-aggregator: restore the set_config()
callback in the driver
- correct schema $id path in ti,twl4030 DT bindings
* tag 'gpio-fixes-for-v6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: tb10x: Drop unused tb10x_set_bits() function
gpio: aggregator: restore the set_config operation
gpiolib: fix invalid pointer access in debugfs
gpio: swnode: don't use the swnode's name as the key for GPIO lookup
dt-bindings: gpio: ti,twl4030: Correct the schema $id path
- Check for reader catching up in ring_buffer_map_get_reader()
If the reader catches up to the writer in the memory mapped ring buffer
then calling rb_get_reader_page() will return NULL as there's no
pages left. But this isn't checked for before calling rb_get_reader_page()
and the return of NULL causes a warning.
If it is detected that the reader caught up to the writer, then simply
exit the routine.
- Fix memory leak in histogram create_field_var()
The couple of the error paths in create_field_var() did not properly clean
up what was allocated. Make sure everything is freed properly on error.
- Fix help message of tools latency_collector
The help message incorrectly stated that "-t" was the same as "--threads"
whereas "--threads" is actually represented by "-e".
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaQ3wOxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qrYvAP9zLYz/pCTTCY64/Yx2gMimFt7g9XhO
b5xL+mZWoiYJigD+Ma7IpRC1QVyAk5YgxkWJqpEyHrxE84fBIBevoTRBTQE=
=+x8m
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Check for reader catching up in ring_buffer_map_get_reader()
If the reader catches up to the writer in the memory mapped ring
buffer then calling rb_get_reader_page() will return NULL as there's
no pages left. But this isn't checked for before calling
rb_get_reader_page() and the return of NULL causes a warning.
If it is detected that the reader caught up to the writer, then
simply exit the routine
- Fix memory leak in histogram create_field_var()
The couple of the error paths in create_field_var() did not properly
clean up what was allocated. Make sure everything is freed properly
on error
- Fix help message of tools latency_collector
The help message incorrectly stated that "-t" was the same as
"--threads" whereas "--threads" is actually represented by "-e"
* tag 'trace-v6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/tools: Fix incorrcet short option in usage text for --threads
tracing: Fix memory leaks in create_field_var()
ring-buffer: Do not warn in ring_buffer_map_get_reader() when reader catches up
-----BEGIN PGP SIGNATURE-----
iQFPBAABCAA5FiEEe7vIQRWZI0iWSE3xu+CwddJFiJoFAmkNsrEbFIAAAAAABAAO
bWFudTIsMi41KzEuMTEsMiwyAAoJELvgsHXSRYiajiUH/jeyKHGEMJiGd9yu0zfX
fElNQpfogT+X/6ZNZGqA78WiRWSfooFOEG8p0OPV5q3zgdVcp++Ap3WoiB0Yi8W0
tbSptM6MJOeP1ZdvsjoBIza5YkRwOUnHl76eBcRrrH+34wd9vGkhPkN4sd+KOwbP
YPc8Iq6FKNxYyeiFUEgsERaIMT+WJbv6Du47VbwFNw4SfmmPO+eIfwCixw+OJ41z
zt4BDvGHStgUiY9y09qSZq45dOZ2rigt9mTOtosJhgxTO3kAZSO7e31B3XOjLxfH
sDXtmm4xV4b6N62ukVAE2ayRj09PQfQsX29SsQJjm7PrFIcRmCkBu6INP0+AIvss
yRY=
=okeg
-----END PGP SIGNATURE-----
Merge tag 'slab-for-6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fix from Vlastimil Babka:
- Fix for potential infinite loop in kmalloc_nolock() when debugging
is enabled for the cache (Vlastimil Babka)
* tag 'slab-for-6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
slab: prevent infinite loop in kmalloc_nolock() with debugging
Address two issues indicated by checkpatch:
- Trailing statements should be on next line.
- Prefer 'unsigned int' to bare use of 'unsigned'.
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
[ rjw: Changelog edits ]
Link: https://patch.msgid.link/20251106045158.3198061-4-superm1@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If image writing fails, a return code is passed up to the caller, but
none of the callers log anything to the log and so the only record
of it is the return code that userspace gets.
Adjust the logging so that the image size and speed of writing is
only emitted on success and if there is an error, it's saved to the
logs.
Fixes: a06c6f5d3c ("PM: hibernate: Move to crypto APIs for LZO compression")
Reported-by: Askar Safin <safinaskar@gmail.com>
Closes: https://lore.kernel.org/linux-pm/20251105180506.137448-1-safinaskar@gmail.com/
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Tested-by: Askar Safin <safinaskar@gmail.com>
Cc: 6.9+ <stable@vger.kernel.org> # 6.9+
[ rjw: Added missing braces after "else", changelog edits ]
Link: https://patch.msgid.link/20251106045158.3198061-2-superm1@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-----BEGIN PGP SIGNATURE-----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=D3Vm
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.18-20251106' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe:
- Remove the sync refill API that was added in this release, in
anticipation of doing it in a better way for the next release
- Fix type extension for calculating size off nr_pages, like we do
in other spots
* tag 'io_uring-6.18-20251106' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
io_uring: fix types for region size calulation
io_uring/zcrx: remove sync refill uapi
All fixes in the UFS driver. The big contributor to the diffstats is
the Intel controller S0ix/S3 fix which has to special case the
suspend/resume patch for intel controllers in ufshcd-pci.c
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCaQ0gPxsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMSwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy
c2hpcC5jb20ACgkQ50LJTO6YrIWCSwEAzH0qcW02Vy5mbZR8xwDIp0ft8XD0P9kq
+YNPvxNEC8gA/22DaDU6KHlDGlNKpwpACzdzbh3yA694ig0eabPX9PhB
=pmib
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"All fixes in the UFS driver.
The big contributor to the diffstats is the Intel controller S0ix/S3
fix which has to special case the suspend/resume patch for intel
controllers in ufshcd-pci.c"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Fix invalid probe error return value
scsi: ufs: ufs-pci: Set UFSHCD_QUIRK_PERFORM_LINK_STARTUP_ONCE for Intel ADL
scsi: ufs: core: Add a quirk to suppress link_startup_again
scsi: ufs: ufs-pci: Fix S0ix/S3 for Intel controllers
scsi: ufs: core: Revert "Make HID attributes visible"
scsi: ufs: core: Reduce link startup failure logging
scsi: ufs: core: Fix a race condition related to the "hid" attribute group
scsi: ufs: ufs-qcom: Fix UFS OCP issue during UFS power down (PC=3)
The i915_gem_object_get_frontbuffer() name is rather confusing wrt.
intel_frontbuffer_get(). Rename to i915_gem_object_frontbuffer_lookup()
to make things less confusing.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251016185408.22735-11-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
-----BEGIN PGP SIGNATURE-----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=QNQi
-----END PGP SIGNATURE-----
Merge tag 'v6.18-rc4-smb-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- More safely detect RDMA capable devices correctly
* tag 'v6.18-rc4-smb-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: detect RDMA capable netdevs include IPoIB
ksmbd: detect RDMA capable lower devices when bridge and vlan netdev is used
The current attempted split between xe/i915 vs. display
for intel_frontbuffer is a mess:
- the i915 rcu leaks through the interface to the display side
- the obj->frontbuffer write-side is now protected by a display
specific spinlock even though the actual obj->framebuffer
pointer lives in a i915 specific structure
- the kref is getting poked directly from both sides
- i915_active is still on the display side
Clean up the mess by moving everything about the frontbuffer
lifetime management to the i915/xe side:
- the rcu usage is now completely contained in i915
- frontbuffer_lock is moved into i915
- kref is on the i915/xe side (xe needs the refcount as well
due to intel_frontbuffer_queue_flush()->intel_frontbuffer_ref())
- the bo (and its refcounting) is no longer on the display side
- i915_active is contained in i915
I was pondering whether we could do this in some kind of smaller
steps, and perhaps we could, but it would probably have to start
with a bunch of reverts (which for sure won't go cleanly anymore).
So not convinced it's worth the hassle.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251016185408.22735-10-ville.syrjala@linux.intel.com
After upcoming intel_frontbuffer lifetime related changes we
won't need intel_frontbuffer::obj for anything apart from
getting at the display. Add a direct pointer for that instead
so that the obj pointer can be completely eliminated.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251016185408.22735-9-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
I want to hide the kref from the high level frontbuffer code.
To that end abstract the kref_get() in intel_frontbuffer_queue_flush()
(which is the only high level function that needs this) as a new
intel_frontbuffer_ref().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251016185408.22735-8-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Our fb_tracking.lock is serving a double duty:
- protects fb_tracking.busy_bits
- provides the write-side protection for obj->frontbuffer
Split obj->frontbuffer role into a separate lock so that
we can clean up the current mess with the frontbuffer lifetime
management.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251016185408.22735-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
intel_bo_frontbuffer_flush_for_display() is a bit too low level
to be directly in the high level dirtyfb code. Move the calls
into intel_frontbuffer_flush().
There is a slight behavioural change here in that we now skip
the flush if the bo is not a current scanout buffer (front->bits
== 0). But that is fine as the flush will eventually happen via
the fb pinning code if/when the bo becomes a scanout buffer again.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251016185408.22735-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Convert intel_bo_flush_if_display() to be an operation on the
frontbuffer object rather than the underlying gem bo. This
will help with cleaning up the frontbuffer xe/i915 vs. display
split.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251016185408.22735-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Get rid of intel_frontbuffer_flip_{prepare,complete}() (and
the accompanying flip_bits) since they are unused.
I suppose these could technically provide a minor optimization
over intel_frontbuffer_flip() in that the flush would get
deferred further if new rendering were to sneak in between the
prepare() and complete() calls. But for correctness it should
not make any difference since another flush will anyway follow
once the new rendering finishes.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251016185408.22735-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Get rid of intel_frontbuffer_flip_{prepare,complete}() from
the overlay code and just use intel_frontbuffer_flip() instead.
The only difference between these are the light interactions
with the ORIGIN_CS busyness tracking, but since the only user
of this is the overlay/xf86-video-intel/Xv the buffer will
always be filled by the CPU and thus we'll never see any
ORIGIN_CS frontbuffer activity there anyway. Also I don't
think we actually have anything covered by the frontbuffer
tracking that affects the overlay (FBC is on the primary
plane, DRRS isn't currently enabled on the platforms with
overlay, and PSR doesn't exist in the hardware).
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251016185408.22735-3-ville.syrjala@linux.intel.com
I don't even know why we have this DIRTYFB flush in the overlay
code. We'll anyway call intel_frontbuffer_flip() so there should
be no need to pretend that this is some kind of frontbuffer only
rendering operation.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251016185408.22735-2-ville.syrjala@linux.intel.com
Somehow CONFIG_PSTORE_FIRMWARE ended up in this document when I intended
it to be CONFIG_CHROMEOS_PSTORE. Correct the configuration option and
make it clear that not all options are required.
Fixes: b1f02f005a ("Documentation: power: Add document on debugging shutdown hangs")
Reported-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
[ rjw: Fixes: tag ]
Link: https://patch.msgid.link/20251106142524.3841343-1-superm1@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Bit 31-30 usage table is already formatted as reST simple table, but it
is wrapped in literal code block instead. Unwrap it.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20251105124707.44736-2-bagasdotme@gmail.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
During module loading, check if a callback function used by the
alternatives specified in the '.altinstruction' ELF section (if present)
is located in core kernel .text. If not fail module loading before
callback is called.
Reported-by: Fanqin Cui <cuifq1@chinatelecom.cn>
Closes: https://lore.kernel.org/all/20250807072700.348514-1-fanqincui@163.com/
Signed-off-by: Adrian Barnaś <abarnas@google.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
[will: Folded in 'noinstr' tweak from Mark]
Signed-off-by: Will Deacon <will@kernel.org>
Disallow a module to load if SCS dynamic patching fails for its code. For
module loading, instead of running a dry-run to check for patching errors,
try to run patching in the first run and propagate any errors so module
loading will fail.
Signed-off-by: Adrian Barnaś <abarnas@google.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Following the pattern established with other Spectre mitigations,
do not print a message when the CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY
Kconfig option is disabled.
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: shechenglong <shechenglong@xfusion.com>
Signed-off-by: Will Deacon <will@kernel.org>
Tidy up the implementation of force_pte_mapping() to make it easier to
read and introduce the split_leaf_mapping_possible() helper to reduce
code duplication in split_kernel_leaf_mapping() and
arch_kfence_init_pool().
Suggested-by: David Hildenbrand (Red Hat) <david@kernel.org>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reviewed-by: Yang Shi <yang@os.amperecomputing.com>
Signed-off-by: Will Deacon <will@kernel.org>
Enter lazy_mmu mode while splitting a range of memory to pte mappings.
This causes barriers, which would otherwise be emitted after every pte
(and pmd/pud) write, to be deferred until exiting lazy_mmu mode.
For large systems, this is expected to significantly speed up fallback
to pte-mapping the linear map for the case where the boot CPU has
BBML2_NOABORT, but secondary CPUs do not. I haven't directly measured
it, but this is equivalent to commit 1fcb7cea8a ("arm64: mm: Batch dsb
and isb when populating pgtables").
Note that for the path from arch_kfence_init_pool(), we may sleep while
allocating memory inside the lazy_mmu mode. Sleeping is not allowed by
generic code inside lazy_mmu, but we know that the arm64 implementation
is sleep-safe. So this is ok and follows the same pattern already used
by split_kernel_leaf_mapping().
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Yang Shi <yang@os.amperecomputing.com>
Signed-off-by: Will Deacon <will@kernel.org>
It has been reported that split_kernel_leaf_mapping() is trying to sleep
in non-sleepable context. It does this when acquiring the
pgtable_split_lock mutex, when either CONFIG_DEBUG_PAGEALLOC or
CONFIG_KFENCE are enabled, which change linear map permissions within
softirq context during memory allocation and/or freeing. All other paths
into this function are called from sleepable context and so are safe.
But it turns out that the memory for which these 2 features may attempt
to modify the permissions is always mapped by pte, so there is no need
to attempt to split the mapping. So let's exit early in these cases and
avoid attempting to take the mutex.
There is one wrinkle to this approach; late-initialized kfence allocates
it's pool from the buddy which may be block mapped. So we must hook that
allocation and convert it to pte-mappings up front. Previously this was
done as a side-effect of kfence protecting all the individual pages in
its pool at init-time, but this no longer works due to the added early
exit path in split_kernel_leaf_mapping().
So instead, do this via the existing arch_kfence_init_pool() arch hook,
and reuse the existing linear_map_split_to_ptes() infrastructure.
Closes: https://lore.kernel.org/all/f24b9032-0ec9-47b1-8b95-c0eeac7a31c5@roeck-us.net/
Fixes: a166563e7e ("arm64: mm: support large block mapping when rodata=full")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <groeck@google.com>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reviewed-by: Yang Shi <yang@os.amperecomputing.com>
Signed-off-by: Will Deacon <will@kernel.org>
Since commit a166563e7e ("arm64: mm: support large block mapping when
rodata=full"), __change_memory_common has more chance to fail due to
memory allocation failure when splitting page table. So check the return
value of set_memory_rox(), then bail out if it fails otherwise we may have
RW memory mapping for kprobes insn page.
Fixes: 195a1b7d83 ("arm64: kprobes: call set_memory_rox() for kprobe page")
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Signed-off-by: Yang Shi <yang@os.amperecomputing.com>
Signed-off-by: Will Deacon <will@kernel.org>
Commit f5a4af3c75 ("ACPI: Add acpi=nospcr to disable ACPI SPCR as
default console on ARM64") introduced a command line parameter to
prevent using SPCR provided console as default. It also introduced a
message to log this choice.
Drop the message as it is not particularly useful and can be incorrect
in situations where no SPCR is provided by the firmware.
Link: https://lore.kernel.org/all/aQN0YWUYaPYWpgJM@willie-the-truck/
Signed-off-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Signed-off-by: Will Deacon <will@kernel.org>
This reverts commit bad3fa2fb9.
Commit bad3fa2fb9 ("ACPI: Suppress misleading SPCR console message
when SPCR table is absent") mistakenly assumes acpi_parse_spcr()
returning 0 to indicate a failure to parse SPCR. While addressing the
resultant incorrect logging it was deemed that dropping the message is
a better approach as it is not particularly useful.
Roll back the commit introducing the bug as a step towards dropping
the log message.
Link: https://lore.kernel.org/all/aQN0YWUYaPYWpgJM@willie-the-truck/
Signed-off-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Signed-off-by: Will Deacon <will@kernel.org>
The non-return per-CPU this_cpu_*() atomic operations are implemented as
STADD/STCLR/STSET when FEAT_LSE is available. On many microarchitecture
implementations, these instructions tend to be executed "far" in the
interconnect or memory subsystem (unless the data is already in the L1
cache). This is in general more efficient when there is contention as it
avoids bouncing cache lines between CPUs. The load atomics (e.g. LDADD
without XZR as destination), OTOH, tend to be executed "near" with the
data loaded into the L1 cache.
STADD executed back to back as in srcu_read_{lock,unlock}*() incur an
additional overhead due to the default posting behaviour on several CPU
implementations. Since the per-CPU atomics are unlikely to be used
concurrently on the same memory location, encourage the hardware to to
execute them "near" by issuing load atomics - LDADD/LDCLR/LDSET - with
the destination register unused (but not XZR).
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/e7d539ed-ced0-4b96-8ecd-048a5b803b85@paulmck-laptop
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Palmer Dabbelt <palmer@dabbelt.com>
[will: Add comment and link to the discussion thread]
Signed-off-by: Will Deacon <will@kernel.org>
This small patch updates the nova todo list to
remove some tasks that have been solved lately:
* COHA is solved in this patch series
* TRSM was solved recently [1]
[1] https://lore.kernel.org/rust-for-linux/DCEJ9SV4LBJL.11EUZVXX6EB9H@nvidia.com/
Signed-off-by: Daniel del Castillo <delcastillodelarosadaniel@gmail.com>
[acourbot@nvidia.com: set prefix to "Documentation: nova:".]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251104193756.57726-4-delcastillodelarosadaniel@gmail.com>
This patch solves one of the existing mentions of COHA, a task
in the Nova task list about improving the `CoherentAllocation` API.
It uses the `write` method from `CoherentAllocation`.
Signed-off-by: Daniel del Castillo <delcastillodelarosadaniel@gmail.com>
[acourbot@nvidia.com: set prefix to "gpu: nova-core:".]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251104193756.57726-3-delcastillodelarosadaniel@gmail.com>
Some comments that already existed didn't start with a capital
letter, this patch fixes that.
Signed-off-by: Daniel del Castillo <delcastillodelarosadaniel@gmail.com>
[acourbot@nvidia.com: set prefix to "gpu: nova-core:".]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251104193756.57726-2-delcastillodelarosadaniel@gmail.com>
This patch solves one of the existing mentions of COHA, a task
in the Nova task list about improving the `CoherentAllocation` API.
It uses the new `from_bytes` method from the `FromBytes` trait as
well as the `as_slice` and `as_slice_mut` methods from
`CoherentAllocation`.
Signed-off-by: Daniel del Castillo <delcastillodelarosadaniel@gmail.com>
[acourbot@nvidia.com: set prefix to "gpu: nova-core:".]
[acourbot@nvidia.com: fix merge conflict after imports refactor.]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251104193756.57726-1-delcastillodelarosadaniel@gmail.com>
As per [1], we need one "use" item per line, in order to reduce merge
conflicts. Furthermore, we need a trailing ", //" in order to tell
rustfmt(1) to leave it alone.
This does that for the entire nova-core driver.
[1] https://docs.kernel.org/rust/coding-guidelines.html#imports
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
[acourbot@nvidia.com: remove imports already in prelude as pointed out
by Danilo.]
[acourbot@nvidia.com: remove a few unneeded trailing `//`.]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251107021006.434109-1-jhubbard@nvidia.com>
Handle the interaction between ("perf/x86/intel: Update dyn_constraint
base on PEBS event precise level") and ("perf/x86/intel: Add a check
for dynamic constraints").
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
The current event scheduler has a limit. If the counter constraint of an
event is not a subset of any other counter constraint with an equal or
higher weight. The counters may not be fully utilized.
To workaround it, the commit bc1738f6ee ("perf, x86: Fix event
scheduler for constraints with overlapping counters") introduced an
overlap flag, which is hardcoded to the event constraint that may
trigger the limit. It only works for static constraints.
Many features on and after Intel PMON v6 require dynamic constraints. An
event constraint is decided by both static and dynamic constraints at
runtime. See commit 4dfe3232cc ("perf/x86: Add dynamic constraint").
The dynamic constraints are from CPUID enumeration. It's impossible to
hardcode it in advance. It's not practical to set the overlap flag to all
events. It's harmful to the scheduler.
For the existing Intel platforms, the dynamic constraints don't trigger
the limit. A real fix is not required.
However, for virtualization, VMM may give a weird CPUID enumeration to a
guest. It's impossible to indicate what the weird enumeration is. A
check is introduced, which can list the possible breaks if a weird
enumeration is used.
Check the dynamic constraints enumerated for normal, branch counters
logging, and auto-counter reload.
Check both PEBS and non-PEBS constratins.
Closes: https://lore.kernel.org/lkml/20250416195610.GC38216@noisy.programming.kicks-ass.net/
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20250512175542.2000708-1-kan.liang@linux.intel.com
Base on previous adaptive PEBS counter snapshot support, add counter
group support for architectural PEBS. Since arch-PEBS shares same
counter group layout with adaptive PEBS, directly reuse
__setup_pebs_counter_group() helper to process arch-PEBS counter group.
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251029102136.61364-13-dapeng1.mi@linux.intel.com
Different with legacy PEBS, arch-PEBS provides per-counter PEBS data
configuration by programing MSR IA32_PMC_GPx/FXx_CFG_C MSRs.
This patch obtains PEBS data configuration from event attribute and then
writes the PEBS data configuration to MSR IA32_PMC_GPx/FXx_CFG_C and
enable corresponding PEBS groups.
Please notice this patch only enables XMM SIMD regs sampling for
arch-PEBS, the other SIMD regs (OPMASK/YMM/ZMM) sampling on arch-PEBS
would be supported after PMI based SIMD regs (OPMASK/YMM/ZMM) sampling
is supported.
Co-developed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251029102136.61364-12-dapeng1.mi@linux.intel.com
arch-PEBS provides CPUIDs to enumerate which counters support PEBS
sampling and precise distribution PEBS sampling. Thus PEBS constraints
should be dynamically configured base on these counter and precise
distribution bitmap instead of defining them statically.
Update event dyn_constraint base on PEBS event precise level.
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251029102136.61364-11-dapeng1.mi@linux.intel.com
Arch-PEBS introduces a new MSR IA32_PEBS_BASE to store the arch-PEBS
buffer physical address. This patch allocates arch-PEBS buffer and then
initialize IA32_PEBS_BASE MSR with the buffer physical address.
Co-developed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251029102136.61364-10-dapeng1.mi@linux.intel.com
