On big endian arm kernels, the arm optimized Curve25519 code produces
incorrect outputs and fails the Curve25519 test. This has been true
ever since this code was added.
It seems that hardly anyone (or even no one?) actually uses big endian
arm kernels. But as long as they're ostensibly supported, we should
disable this code on them so that it's not accidentally used.
Note: for future-proofing, use !CPU_BIG_ENDIAN instead of
CPU_LITTLE_ENDIAN. Both of these are arch-specific options that could
get removed in the future if big endian support gets dropped.
Fixes: d8f1308a02 ("crypto: arm/curve25519 - wire up NEON implementation")
Cc: stable@vger.kernel.org
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251104054906.716914-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Commit 2f13daee2a ("lib/crypto/curve25519-hacl64: Disable KASAN with
clang-17 and older") inadvertently disabled KASAN in curve25519-hacl64.o
for GCC unconditionally because clang-min-version will always evaluate
to nothing for GCC. Add a check for CONFIG_CC_IS_CLANG to avoid applying
the workaround for GCC, which is only needed for clang-17 and older.
Cc: stable@vger.kernel.org
Fixes: 2f13daee2a ("lib/crypto/curve25519-hacl64: Disable KASAN with clang-17 and older")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251103-curve25519-hacl64-fix-kasan-workaround-v2-1-ab581cbd8035@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
When unbinding a memslot from a guest_memfd instance, remove the bindings
even if the guest_memfd file is dying, i.e. even if its file refcount has
gone to zero. If the memslot is freed before the file is fully released,
nullifying the memslot side of the binding in kvm_gmem_release() will
write to freed memory, as detected by syzbot+KASAN:
==================================================================
BUG: KASAN: slab-use-after-free in kvm_gmem_release+0x176/0x440 virt/kvm/guest_memfd.c:353
Write of size 8 at addr ffff88807befa508 by task syz.0.17/6022
CPU: 0 UID: 0 PID: 6022 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/02/2025
Call Trace:
<TASK>
dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xca/0x240 mm/kasan/report.c:482
kasan_report+0x118/0x150 mm/kasan/report.c:595
kvm_gmem_release+0x176/0x440 virt/kvm/guest_memfd.c:353
__fput+0x44c/0xa70 fs/file_table.c:468
task_work_run+0x1d4/0x260 kernel/task_work.c:227
resume_user_mode_work include/linux/resume_user_mode.h:50 [inline]
exit_to_user_mode_loop+0xe9/0x130 kernel/entry/common.c:43
exit_to_user_mode_prepare include/linux/irq-entry-common.h:225 [inline]
syscall_exit_to_user_mode_work include/linux/entry-common.h:175 [inline]
syscall_exit_to_user_mode include/linux/entry-common.h:210 [inline]
do_syscall_64+0x2bd/0xfa0 arch/x86/entry/syscall_64.c:100
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fbeeff8efc9
</TASK>
Allocated by task 6023:
kasan_save_stack mm/kasan/common.c:56 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:77
poison_kmalloc_redzone mm/kasan/common.c:397 [inline]
__kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:414
kasan_kmalloc include/linux/kasan.h:262 [inline]
__kmalloc_cache_noprof+0x3e2/0x700 mm/slub.c:5758
kmalloc_noprof include/linux/slab.h:957 [inline]
kzalloc_noprof include/linux/slab.h:1094 [inline]
kvm_set_memory_region+0x747/0xb90 virt/kvm/kvm_main.c:2104
kvm_vm_ioctl_set_memory_region+0x6f/0xd0 virt/kvm/kvm_main.c:2154
kvm_vm_ioctl+0x957/0xc60 virt/kvm/kvm_main.c:5201
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0xfa0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 6023:
kasan_save_stack mm/kasan/common.c:56 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:77
kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:584
poison_slab_object mm/kasan/common.c:252 [inline]
__kasan_slab_free+0x5c/0x80 mm/kasan/common.c:284
kasan_slab_free include/linux/kasan.h:234 [inline]
slab_free_hook mm/slub.c:2533 [inline]
slab_free mm/slub.c:6622 [inline]
kfree+0x19a/0x6d0 mm/slub.c:6829
kvm_set_memory_region+0x9c4/0xb90 virt/kvm/kvm_main.c:2130
kvm_vm_ioctl_set_memory_region+0x6f/0xd0 virt/kvm/kvm_main.c:2154
kvm_vm_ioctl+0x957/0xc60 virt/kvm/kvm_main.c:5201
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0xfa0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Deliberately don't acquire filemap invalid lock when the file is dying as
the lifecycle of f_mapping is outside the purview of KVM. Dereferencing
the mapping is *probably* fine, but there's no need to invalidate anything
as memslot deletion is responsible for zapping SPTEs, and the only code
that can access the dying file is kvm_gmem_release(), whose core code is
mutually exclusive with unbinding.
Note, the mutual exclusivity is also what makes it safe to access the
bindings on a dying gmem instance. Unbinding either runs with slots_lock
held, or after the last reference to the owning "struct kvm" is put, and
kvm_gmem_release() nullifies the slot pointer under slots_lock, and puts
its reference to the VM after that is done.
Reported-by: syzbot+2479e53d0db9b32ae2aa@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/68fa7a22.a70a0220.3bf6c6.008b.GAE@google.com
Tested-by: syzbot+2479e53d0db9b32ae2aa@syzkaller.appspotmail.com
Fixes: a7800aa80e ("KVM: Add KVM_CREATE_GUEST_MEMFD ioctl() for guest-specific backing memory")
Cc: stable@vger.kernel.org
Cc: Hillf Danton <hdanton@sina.com>
Reviewed-By: Vishal Annapurve <vannapurve@google.com>
Link: https://patch.msgid.link/20251104011205.3853541-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add and use a helper, kvm_prepare_unexpected_reason_exit(), to dedup the
code that fills the exit reason and CPU when KVM encounters a VM-Exit that
KVM doesn't know how to handle.
Reviewed-by: yaoyuan@linux.alibaba.com
Reviewed-by: Yao Yuan <yaoyuan@linux.alibaba.com>
Reviewed-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Acked-by: Kai Huang <kai.huang@intel.com>
Link: https://patch.msgid.link/20251030185004.3372256-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use a raw spinlock for vcpu_svm.ir_list_lock as the lock can be taken
during schedule() via kvm_sched_out() => __avic_vcpu_put(), and "normal"
spinlocks are sleepable locks when PREEMPT_RT=y.
This fixes the following lockdep warning:
=============================
[ BUG: Invalid wait context ]
6.12.0-146.1640_2124176644.el10.x86_64+debug #1 Not tainted
-----------------------------
qemu-kvm/38299 is trying to lock:
ff11000239725600 (&svm->ir_list_lock){....}-{3:3}, at: __avic_vcpu_put+0xfd/0x300 [kvm_amd]
other info that might help us debug this:
context-{5:5}
2 locks held by qemu-kvm/38299:
#0: ff11000239723ba8 (&vcpu->mutex){+.+.}-{4:4}, at: kvm_vcpu_ioctl+0x240/0xe00 [kvm]
#1: ff11000b906056d8 (&rq->__lock){-.-.}-{2:2}, at: raw_spin_rq_lock_nested+0x2e/0x130
stack backtrace:
CPU: 1 UID: 0 PID: 38299 Comm: qemu-kvm Kdump: loaded Not tainted 6.12.0-146.1640_2124176644.el10.x86_64+debug #1 PREEMPT(voluntary)
Hardware name: AMD Corporation QUARTZ/QUARTZ, BIOS RQZ100AB 09/14/2023
Call Trace:
<TASK>
dump_stack_lvl+0x6f/0xb0
__lock_acquire+0x921/0xb80
lock_acquire.part.0+0xbe/0x270
_raw_spin_lock_irqsave+0x46/0x90
__avic_vcpu_put+0xfd/0x300 [kvm_amd]
svm_vcpu_put+0xfa/0x130 [kvm_amd]
kvm_arch_vcpu_put+0x48c/0x790 [kvm]
kvm_sched_out+0x161/0x1c0 [kvm]
prepare_task_switch+0x36b/0xf60
__schedule+0x4f7/0x1890
schedule+0xd4/0x260
xfer_to_guest_mode_handle_work+0x54/0xc0
vcpu_run+0x69a/0xa70 [kvm]
kvm_arch_vcpu_ioctl_run+0xdc0/0x17e0 [kvm]
kvm_vcpu_ioctl+0x39f/0xe00 [kvm]
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://patch.msgid.link/20251030194130.307900-1-mlevitsk@redhat.com
[sean: massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Make amd_iommu_register_ga_log_notifier() a local symbol now that it's
defined and used purely within avic.c.
No functional change intended.
Fixes: 4bdec12aa8 ("KVM: SVM: Detect X2APIC virtualization (x2AVIC) support")
Link: https://patch.msgid.link/20251016190643.80529-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Unregister the GALog notifier (used to get notified of wake events for
blocking vCPUs) on kvm-amd.ko exit so that a KVM or IOMMU driver bug that
results in a spurious GALog event "only" results in a spurious IRQ, and
doesn't trigger a use-after-free due to executing unloaded module code.
Fixes: 5881f73757 ("svm: Introduce AMD IOMMU avic_ga_log_notifier")
Reported-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Closes: https://lore.kernel.org/all/20250918130320.GA119526@k08j02272.eu95sqa
Link: https://patch.msgid.link/20251016190643.80529-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Setup the per-CPU SVM data structures at the very end of hardware setup so
that svm_hardware_unsetup() can be used in svm_hardware_setup() to unwind
AVIC setup (for the GALog notifier). Alternatively, the error path could
do an explicit, manual unwind, e.g. by adding a helper to free the per-CPU
structures. But the per-CPU allocations have no interactions or
dependencies, i.e. can comfortably live at the end, and so converting to
a manual unwind would introduce churn and code without providing any
immediate advantage.
Link: https://patch.msgid.link/20251016190643.80529-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Update the comment above is_xstate_managed_msr() to note that
MSR_IA32_S_CET isn't saved/restored by XSAVES/XRSTORS.
MSR_IA32_S_CET isn't part of CET_U/S state as the SDM states:
The register state used by Control-Flow Enforcement Technology (CET)
comprises the two 64-bit MSRs (IA32_U_CET and IA32_PL3_SSP) that manage
CET when CPL = 3 (CET_U state); and the three 64-bit MSRs
(IA32_PL0_SSP–IA32_PL2_SSP) that manage CET when CPL < 3 (CET_S state).
Opportunistically shift the snippet about the safety of loading certain
MSRs to the function comment for kvm_access_xstate_msr(), which is where
the MSRs are actually loaded into hardware.
Fixes: e44eb58334 ("KVM: x86: Load guest FPU state when access XSAVE-managed MSRs")
Signed-off-by: Chao Gao <chao.gao@intel.com>
Link: https://patch.msgid.link/20251028060142.29830-1-chao.gao@intel.com
[sean: shift snippet about safety to kvm_access_xstate_msr()]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Assert, via KVM_BUG_ON(), that guest FPU state isn't/is in use when
loading/putting the FPU to help detect KVM bugs without needing an assist
from KASAN. If an imbalanced load/put is detected, skip the redundant
load/put to avoid clobbering guest state and/or crashing the host.
Note, kvm_access_xstate_msr() already provides a similar assertion.
Reviewed-by: Yao Yuan <yaoyuan@linux.alibaba.com>
Reviewed-by: Chao Gao <chao.gao@intel.com>
Link: https://patch.msgid.link/20251030185802.3375059-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Replace the hack added by commit f958bd2314 ("KVM: x86: Fix potential
put_fpu() w/o load_fpu() on MPX platform") with a more robust approach of
unloading+reloading guest FPU state based on whether or not the vCPU's FPU
is currently in-use, i.e. currently loaded. This fixes a bug on hosts
that support CET but not MPX, where kvm_arch_vcpu_ioctl_get_mpstate()
neglects to load FPU state (it only checks for MPX support) and leads to
KVM attempting to put FPU state due to kvm_apic_accept_events() triggering
INIT emulation. E.g. on a host with CET but not MPX, syzkaller+KASAN
generates:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000004: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000020-0x0000000000000027]
CPU: 211 UID: 0 PID: 20451 Comm: syz.9.26 Tainted: G S 6.18.0-smp-DEV #7 NONE
Tainted: [S]=CPU_OUT_OF_SPEC
Hardware name: Google Izumi/izumi, BIOS 0.20250729.1-0 07/29/2025
RIP: 0010:fpu_swap_kvm_fpstate+0x3ce/0x610 ../arch/x86/kernel/fpu/core.c:377
RSP: 0018:ff1100410c167cc0 EFLAGS: 00010202
RAX: 0000000000000004 RBX: 0000000000000020 RCX: 00000000000001aa
RDX: 00000000000001ab RSI: ffffffff817bb960 RDI: 0000000022600000
RBP: dffffc0000000000 R08: ff110040d23c8007 R09: 1fe220081a479000
R10: dffffc0000000000 R11: ffe21c081a479001 R12: ff110040d23c8d98
R13: 00000000fffdc578 R14: 0000000000000000 R15: ff110040d23c8d90
FS: 00007f86dd1876c0(0000) GS:ff11007fc969b000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f86dd186fa8 CR3: 00000040d1dfa003 CR4: 0000000000f73ef0
PKRU: 80000000
Call Trace:
<TASK>
kvm_vcpu_reset+0x80d/0x12c0 ../arch/x86/kvm/x86.c:11818
kvm_apic_accept_events+0x1cb/0x500 ../arch/x86/kvm/lapic.c:3489
kvm_arch_vcpu_ioctl_get_mpstate+0xd0/0x4e0 ../arch/x86/kvm/x86.c:12145
kvm_vcpu_ioctl+0x5e2/0xed0 ../virt/kvm/kvm_main.c:4539
__se_sys_ioctl+0x11d/0x1b0 ../fs/ioctl.c:51
do_syscall_x64 ../arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x6e/0x940 ../arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f86de71d9c9
</TASK>
with a very simple reproducer:
r0 = openat$kvm(0xffffffffffffff9c, &(0x7f0000000000), 0x80b00, 0x0)
r1 = ioctl$KVM_CREATE_VM(r0, 0xae01, 0x0)
ioctl$KVM_CREATE_IRQCHIP(r1, 0xae60)
r2 = ioctl$KVM_CREATE_VCPU(r1, 0xae41, 0x0)
ioctl$KVM_SET_IRQCHIP(r1, 0x8208ae63, ...)
ioctl$KVM_GET_MP_STATE(r2, 0x8004ae98, &(0x7f00000000c0))
Alternatively, the MPX hack in GET_MP_STATE could be extended to cover CET,
but from a "don't break existing functionality" perspective, that isn't any
less risky than peeking at the state of in_use, and it's far less robust
for a long term solution (as evidenced by this bug).
Reported-by: Alexander Potapenko <glider@google.com>
Fixes: 69cc3e8865 ("KVM: x86: Add XSS support for CET_KERNEL and CET_USER")
Reviewed-by: Yao Yuan <yaoyuan@linux.alibaba.com>
Reviewed-by: Chao Gao <chao.gao@intel.com>
Link: https://patch.msgid.link/20251030185802.3375059-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
With the Xe page fault layer and GuC page layer in place, this is now
dead code and can be removed. ACC code is also removed, but this was
dead code.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Tested-by: Francois Dugast <francois.dugast@intel.com>
Link: https://patch.msgid.link/20251031165416.2871503-8-matthew.brost@intel.com
Add xe_guc_pagefault layer (producer) which parses G2H fault messages
messages into struct xe_pagefault, forwards them to the page fault layer
(consumer) for servicing, and provides a vfunc to acknowledge faults to
the GuC upon completion. Replace the old (and incorrect) GT page fault
layer with this new layer throughout the driver.
As part of this change, the ACC handling code has been removed, as it is
dead code that is currently unused.
v2:
- Include engine instance (Stuart)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Tested-by: Francois Dugast <francois.dugast@intel.com>
Link: https://patch.msgid.link/20251031165416.2871503-7-matthew.brost@intel.com
Implement a worker that services page faults, using the same
implementation as in xe_gt_pagefault.c.
v2:
- Rebase on exhaustive eviction changes
- Include engine instance in debug prints (Stuart)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Tested-by: Francois Dugast <francois.dugast@intel.com>
Link: https://patch.msgid.link/20251031165416.2871503-6-matthew.brost@intel.com
Enqueue (copy) the input struct xe_pagefault into a queue (i.e., into a
memory buffer) and schedule a worker to service it.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Tested-by: Francois Dugast <francois.dugast@intel.com>
Link: https://patch.msgid.link/20251031165416.2871503-5-matthew.brost@intel.com
Squash any pending faults on the GT being reset by setting the GT field
in struct xe_pagefault to NULL.
v4:
- Only do reset it page faults queues initialized (CI)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Tested-by: Francois Dugast <francois.dugast@intel.com>
Link: https://patch.msgid.link/20251031165416.2871503-4-matthew.brost@intel.com
Extend DRM_IOCTL_AMDXDNA_GET_INFO to include additional parameters
that allow collection of telemetry data.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251104062546.833771-3-lizhi.hou@amd.com
Extend DRM_IOCTL_AMDXDNA_GET_INFO to include additional parameters
that allow collection of resource data.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251104062546.833771-2-lizhi.hou@amd.com
Stub out the new page fault layer and add kernel documentation. This is
intended as a replacement for the GT page fault layer, enabling multiple
producers to hook into a shared page fault consumer interface.
v2:
- Fix kernel doc typo (checkpatch)
- Remove comment around GT (Stuart)
- Add explaination around reclaim (Francois)
- Add comment around u8 vs enum (Francois)
- Include engine instance (Stuart)
v3:
- Fix XE_PAGEFAULT_TYPE_ATOMIC_ACCESS_VIOLATION kernel doc (Stuart)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Tested-by: Francois Dugast <francois.dugast@intel.com>
Link: https://patch.msgid.link/20251031165416.2871503-2-matthew.brost@intel.com
Add three hardware specific attributes to describe device capabilities:
hwctx_limit: The maximum number of hardware context supported.
max_tops: The maximum TOPS supported.
curr_tops: The TOPS achievable with the current power and frequency
configuration.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20251104062546.833771-1-lizhi.hou@amd.com
If we don't end up initializing the fences, free them when
we free the job. We can't set the hw_fence to NULL after
emitting it because we need it in the cleanup path for the
submit direct case.
v2: take a reference to the fences if we emit them
v3: handle non-job fence in error paths
Fixes: db36632ea5 ("drm/amdgpu: clean up and unify hw fence handling")
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com> (v1)
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During gpu reset, all GPU-related resources are
inaccessible. To avoid affecting ras functionality,
suspend ras module before gpu reset and resume
it after gpu reset is complete.
V2:
Rename functions to avoid misunderstanding.
V3:
Move flush_delayed_work to amdgpu_ras_process_pause,
Move schedule_delayed_work to amdgpu_ras_process_unpause.
V4:
Rename functions.
V5:
Move the function to amdgpu_ras.c.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add wrapper functions for pmfw eeprom interface, for these interfaces
to be easily and safely called
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add function to check if pmfw is supported, skip eeprom
check and recover when pmfw eeprom is supported
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add functions to get smu ras driver
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
implement ras_smu_drv interface for smu v13.0.12
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add new message definitions for pmfw eeprom interface
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To fix regression report on gfx8, which requires the exhaustive search
path for signaled event.
The high CPU usage of KFD interrupt wq issue is gone after HIP/ROCr add
option to reduce HW event interrupts, safe to revert this optimization
patch now.
This reverts commit de844846f7.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If process is killed. the vm entity is stopped, submit pt update job
will trigger the error message "*ERROR* Trying to push to a killed
entity", job will not execute.
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add ras support for umc v12_5_0.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add ras support for nbio v7_9_1.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the flows for S0ix. There is no need to stop
rlc or reintialize PMFW in S0ix.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4659
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reported-by: Antheas Kapenekakis <lkml@antheas.dev>
Tested-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use a schema similar to gpu metrics v1.9 for partition metrics also. It
will have field type encoded followed by the field value(s). The
attribute ids used will be shared with gpu metrics. The structure
definition is only to distinguish between gpu metrics and partition
metrics though both gpu metrics v1.9 and partition metrics v1.1 follow
the same definition.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fill and publish GPU metrics in v1.9 format for SMUv13.0.12 SOCs
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make sure the bo is valid before using it.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
BO's reservation object must be locked before using
amdgpu_vm_bo_update_shared otherwise dma_resv_assert_held will
complain in amdgpu_vm_update_shared.
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise it is possible that between dropping the status lock and
locking the BO that the BO is freed up.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
../ras/rascore/ras_cper.c: In function ‘cper_generate_fatal_record.isra’:
../ras/rascore/ras_cper.c:75:36: error: ‘%llX’ directive output may be truncated writing between 1 and 14 bytes into a region of size between 0 and 7 [-Werror=format-truncation=]
75 | snprintf(record_id, 9, "%d:%llX", dev_info.socket_id,
| ^~~~
../ras/rascore/ras_cper.c:75:32: note: directive argument in the range [0, 72057594037927935]
75 | snprintf(record_id, 9, "%d:%llX", dev_info.socket_id,
| ^~~~~~~~~
../ras/rascore/ras_cper.c:75:9: note: ‘snprintf’ output between 4 and 27 bytes into a destination of size 9
75 | snprintf(record_id, 9, "%d:%llX", dev_info.socket_id,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
76 | RAS_LOG_SEQNO_TO_BATCH_IDX(trace->seqno));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../ras/rascore/ras_cper.c: In function ‘cper_generate_runtime_record.isra’:
../ras/rascore/ras_cper.c:75:36: error: ‘%llX’ directive output may be truncated writing between 1 and 14 bytes into a region of size between 0 and 7 [-Werror=format-truncation=]
75 | snprintf(record_id, 9, "%d:%llX", dev_info.socket_id,
| ^~~~
../ras/rascore/ras_cper.c:75:32: note: directive argument in the range [0, 72057594037927935]
75 | snprintf(record_id, 9, "%d:%llX", dev_info.socket_id,
| ^~~~~~~~~
../ras/rascore/ras_cper.c:75:9: note: ‘snprintf’ output between 4 and 27 bytes into a destination of size 9
75 | snprintf(record_id, 9, "%d:%llX", dev_info.socket_id,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
76 | RAS_LOG_SEQNO_TO_BATCH_IDX(trace->seqno));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following update:
- HDCP2 FW locality check refactors
- Fix black screen issue with HDMI output
- Increase IB mem size
- Revert max buffered cursor size to 64
- Extend inbox0 lock to run Replay / PSR
- Refactor VActive implementation
- Add Pstate viewport reduction
- Persist stream refcount through restore
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Release hightlights
DCN35/36
* Dynamically clock gate before and after prefetch
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
This fixes the black screen issue on certain APUs with HDMI,
accompanied by the following messages:
amdgpu 0000:c4:00.0: amdgpu: [drm] Failed to setup vendor info
frame on connector DP-1: -22
amdgpu 0000:c4:00.0: [drm] Cannot find any crtc or sizes [drm]
Cannot find any crtc or sizes
Fixes: 489f0f600c ("drm/amd/display: Fix DVI-D/HDMI adapters")
Suggested-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Increase IB mem size to match size of largest structure that will
use IB transfer between driver and DMU.
Reviewed-by: Oleh Kuzhylnyi <oleh.kuzhylnyi@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
The buffered cursor cap is expressed assuming a square cursor, and usage
of the cursor buffer is limited by the request size. For greater than 32
pixels, the request size is fixed at 256 bytes, so the maximum width
must be floored to the nearest 256th byte. At 4bpp this means even with
24kB DCN4 can only hold a 64x64 cursor in the buffer as even 65 pixels
would require 512 bytes per line instead of 256.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Overwriting the refcount on stream restore can lead to double-free errors
or memory leaks if an unbalanced number of retains and releases occurs
between a backup and restore.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
