The CPU doing the prepare work for a remote target must be online from
the tree point of view and its hierarchy must be active, otherwise
propagating its active state up to the new root branch would be either
incorrect or racy.
Assert those conditions with more sanity checks.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251024132536.39841-5-frederic@kernel.org
When a CPU from a new node boots, the old root may happen to be
connected to the new root even if their node mismatch, as depicted in
the following scenario:
1) CPU 0 boots and creates the first group for node 0.
[GRP0:0]
node 0
|
CPU 0
2) CPU 1 from node 1 boots and creates a new top that corresponds to
node 1, but it also connects the old root from node 0 to the new root
from node 1 by mistake.
[GRP1:0]
node 1
/ \
/ \
[GRP0:0] [GRP0:1]
node 0 node 1
| |
CPU 0 CPU 1
3) This eventually leads to an imbalanced tree where some node 0 CPUs
migrate node 1 timers (and vice versa) way before reaching the
crossnode groups, resulting in more frequent remote memory accesses
than expected.
[GRP2:0]
NUMA_NO_NODE
/ \
[GRP1:0] [GRP1:1]
node 1 node 0
/ \ |
/ \ [...]
[GRP0:0] [GRP0:1]
node 0 node 1
| |
CPU 0... CPU 1...
A balanced tree should only contain groups having children that belong
to the same node:
[GRP2:0]
NUMA_NO_NODE
/ \
[GRP1:0] [GRP1:0]
node 0 node 1
/ \ / \
/ \ / \
[GRP0:0] [...] [...] [GRP0:1]
node 0 node 1
| |
CPU 0... CPU 1...
In order to fix this, the hierarchy must be unfolded up to the crossnode
level as soon as a node mismatch is detected. For example the stage 2
above should lead to this layout:
[GRP2:0]
NUMA_NO_NODE
/ \
[GRP1:0] [GRP1:1]
node 0 node 1
/ \
/ \
[GRP0:0] [GRP0:1]
node 0 node 1
| |
CPU 0 CPU 1
This means that not only GRP1:0 must be created but also GRP1:1 and
GRP2:0 in order to prepare a balanced tree for next CPUs to boot.
Fixes: 7ee9887703 ("timers: Implement the hierarchical pull model")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251024132536.39841-4-frederic@kernel.org
Initializing the tmc's group, the group's number of children and the
group's parent can all be done without locking because:
1) Reading the group's parent and its group mask is done locklessly.
2) The connections prepared for a given CPU hierarchy are visible to the
target CPU once online, thanks to the CPU hotplug enforced memory
ordering.
3) In case of a newly created upper level, the new root and its
connections and initialization are made visible by the CPU which made
the connections. When that CPUs goes idle in the future, the new link
is published by tmigr_inactive_up() through the atomic RmW on
->migr_state.
4) If CPUs were still walking up the active hierarchy, they could observe
the new root earlier. In this case the ordering is enforced by an
early initialization of the group mask and by barriers that maintain
address dependency as explained in:
b729cc1ec2 ("timers/migration: Fix another race between hotplug and idle entry/exit")
de3ced72a7 ("timers/migration: Enforce group initialization visibility to tree walkers")
5) Timers are propagated by a chain of group locking from the bottom to
the top. And while doing so, the tree also propagates groups links
and initialization. Therefore remote expiration, which also relies
on group locking, will observe those links and initialization while
holding the root lock before walking the tree remotely and update
remote timers. This is especially important for migrators in the
active hierarchy that may observe the new root early.
Therefore the locking is unnecessary at initialization. If anything, it
just brings confusion. Remove it.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251024132536.39841-3-frederic@kernel.org
Both the "do while" and "while" loops in tmigr_setup_groups() eventually
mimic the behaviour of "for" loops.
Simplify accordingly.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251024132536.39841-2-frederic@kernel.org
On large NUMA systems, while running a test program that saturates the
inter-processor and inter-NUMA links, acquiring the jiffies_lock can be
very expensive.
If the cpu designated to do jiffies updates (tick_do_timer_cpu) gets
delayed and other cpus decide to do the jiffies update themselves, a large
number of them decide to do so at the same time.
The inexpensive check against tick_next_period is far quicker than actually
acquiring the lock, so most of these get in line to obtain the lock. If
obtaining the lock is slow enough, this spirals into the vast majority of
CPUs continuously being stuck waiting for this lock, just to obtain it and
find out that time has already been updated by another cpu. For example, on
one random entry to kdb by manually-injected NMI, 2912 of 3840 CPUs were
observed to be stuck there.
To avoid this, allow only one non-timekeeper CPU to call
tick_do_update_jiffies64() at any given time, resetting ts->stalled jiffies
only if the jiffies update function is actually called.
With this change, manually interrupting the test at most two CPUs are
observed to invoke tick_do_update_jiffies64() - the timekeeper and one
other.
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Link: https://patch.msgid.link/20251027183456.343407-1-steve.wahl@hpe.com
Update the register offsets for all the clock ref branches to match the
new address mapping in the TCSR subsystem.
Fixes: 2c1d6ce4f3 ("clk: qcom: Add TCSR clock driver for Glymur SoC")
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Tested-by: Jagadeesh Kona <jagadeesh.kona@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251031-tcsrcc_glymur-v1-1-0efb031f0ac5@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
One new device ID for an Intel SoC.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmkF+eAACgkQJNaLcl1U
h9CUIwf+J+ii60TWW4Ye9rRy4QN5WjLLud9VTpVtLIVu54oXK4NxU+blTQ82AynB
291ZJ3sEHiO4PTi6ZAUsgKCZ+bCS0fE2XBJBH642yTyM1ixyFx/hs71rzE97OOA4
tQFAxJwJFRXIwTq4HEwBbxE1Oh0KFnBMQAo6lWx9rrtm+6BcUzYMXTwGYajLj3gj
vULpU6xpOuJ7H+LgM8W0pHVD4iGdqMUy/6qiknjmN5UKiormJxjBQzPSLgQis/7R
tSFO6dOfsQgEmlzIgBgHFtnikCNor6aA5bLOJgmPIemX9csQaejyZSpyAWSfZYdQ
28/yA4VemgiEddfeecpCMCd2s8vzQA==
=Y8Hn
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fix from Mark Brown:
"One new device ID for an Intel SoC"
* tag 'spi-fix-v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: intel: Add support for Oak Stream SPI serial flash
A simple fix for a missed part of an API conversion on the bd718x7 driver.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmkF+isACgkQJNaLcl1U
h9CmJgf+MSainrAqu7SLLGYCA9P+dpUwxHoxWX5cpCMWFGNPGIg6hr9sDjxJuOXr
gQkUcSOzkFJgJ3WCphiOIUgXttRfYqk3/O2/LFn3Co0cdlnI8jTy5nTD7Ks4H8Aa
e2mUo+okFRMH2zYIOxDXzCwTgPuNc0glLSLTjFqc1pwghvPmgHqJEWbjVG560GbI
HBKrTCygFOIJT5LVMGXWFEh8IPTMdvDn4VFGqMwT9KaDx4DP+fYecfg8CEePHsRl
F+40J2URgUDFYMOInzMoWL91766q9euQTsywLWFS3KxKtll+19jF6oACdeA3cXZE
guR6V2zxzj8acpQ1REhCO11trAvLTw==
=beWy
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"A simple fix for a missed part of an API conversion in the bd718x7
driver"
* tag 'regulator-fix-v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: bd718x7: Fix voltages scaled by resistor divider
There is currently a problem where, in the specific case of SMEM not
initialized by SBL, any SMEM API wrongly returns PROBE_DEFER
communicating wrong info to any user of this API.
A better way to handle this would be to track the SMEM state and return
a different kind of error than PROBE_DEFER.
Rework the __smem handle to always init it to the error pointer
-EPROBE_DEFER following what is already done by the SMEM API.
If we detect that the SBL didn't initialized SMEM, set the __smem handle
to the error pointer -ENODEV.
Also rework the SMEM API to handle the __smem handle to be an error
pointer and return it appropriately.
This way user of the API can react and return a proper error or use
fallback way for the failing API.
While at it, change the return error when SMEM is not initialized by SBL
also to -ENODEV to make it consistent with the __smem handle and use
dev_err_probe() helper to return the message.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20251031130835.7953-3-ansuelsmth@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
One documentation fix and a fix for a problem with the slimbus regmap
which was uncovered by some changes in one of the drivers.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmkF/SEACgkQJNaLcl1U
h9BjXwgAgg3HM/oWn3aiWp8q9j58dSJb7pWD+GKdBS8lvBoOvmnHY9QnEOkBFmvV
Oa1vNiKVlRIsa0YRbswsvkB0Wt6F5vOaQ3WrZpVYpuF5xxyC/1b0AQTIiZhfZN2E
p46E1/VkCJNWdoJwqdIS9kWvZDHeA3BcCDwDc56FsgBE/25LNfVOPy/wxR0OU2dd
1LFGASCW9SRV6+xxCAb+FE/eLM/7RGvjIFiuh5flx/oPKfoqyQ5E1hjnrG5CJH0k
kI8mapifSFB2cd72SKdB/KywQVYmzkFQMQYUmHKiFWtqwql8A6TjAsmX/yJmdUI1
7OioR+sA6TGr4QNjUE/0NyrAotLs6A==
=1Osa
-----END PGP SIGNATURE-----
Merge tag 'regmap-fix-v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap fixes from Mark Brown:
"One documentation fix and a fix for a problem with the slimbus regmap
which was uncovered by some changes in one of the drivers"
* tag 'regmap-fix-v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: irq: Correct documentation of wake_invert flag
regmap: slimbus: fix bus_context pointer in regmap init calls
Add INIT_ERR_PTR() macro to initialize static variables with error
pointers. This might be useful for specific case where there is a static
variable initialized to an error condition and then later set to the
real handle once probe finish/completes.
This is to handle compilation problems like:
error: initializer element is not constant
where ERR_PTR() can't be used.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20251031130835.7953-2-ansuelsmth@gmail.com
[bjorn: Added () suffix on macro references]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
- Limit AMD microcode Entrysign sha256 signature checking to
known CPU generations.
- Disable AMD RDSEED32 on certain Zen5 CPUs that have a
microcode version before when the microcode-based fix was
issued for the AMD-SB-7055 erratum.
- Fix FPU AMD XFD state synchronization on signal delivery
- Fix (work around) a SSE4a-disassembly related build failure
on X86_NATIVE_CPU=y builds.
- Extend the AMD Zen6 model space with a new range of models
- Fix <asm/intel-family.h> CPU model comments
- Fix the CONFIG_CFI=y and CONFIG_LTO_CLANG_FULL=y build, which
was unhappy due to missing kCFI type annotations of clear_page()
variants.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=z2oz
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2025-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- Limit AMD microcode Entrysign sha256 signature checking to
known CPU generations
- Disable AMD RDSEED32 on certain Zen5 CPUs that have a
microcode version before when the microcode-based fix was
issued for the AMD-SB-7055 erratum
- Fix FPU AMD XFD state synchronization on signal delivery
- Fix (work around) a SSE4a-disassembly related build failure
on X86_NATIVE_CPU=y builds
- Extend the AMD Zen6 model space with a new range of models
- Fix <asm/intel-family.h> CPU model comments
- Fix the CONFIG_CFI=y and CONFIG_LTO_CLANG_FULL=y build, which
was unhappy due to missing kCFI type annotations of clear_page()
variants
* tag 'x86-urgent-2025-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Ensure clear_page() variants always have __kcfi_typeid_ symbols
x86/cpu: Add/fix core comments for {Panther,Nova} Lake
x86/CPU/AMD: Extend Zen6 model range
x86/build: Disable SSE4a
x86/fpu: Ensure XFD state on signal delivery
x86/CPU/AMD: Add RDSEED fix for Zen5
x86/microcode/AMD: Limit Entrysign signature checking to known generations
- Fix an out-of-bounds access on non-hybrid platforms in the
Intel PMU DS code, reported by KASAN.
- Add WildcatLake PMU and uncore support: it's identical to the
PantherLake version.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=NYBY
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2025-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf event fixes from Ingo Molnar:
"Miscellaneous fixes and CPU model updates:
- Fix an out-of-bounds access on non-hybrid platforms in the Intel
PMU DS code, reported by KASAN
- Add WildcatLake PMU and uncore support: it's identical to the
PantherLake version"
* tag 'perf-urgent-2025-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Add uncore PMU support for Wildcat Lake
perf/x86/intel: Add PMU support for WildcatLake
perf/x86/intel: Fix KASAN global-out-of-bounds warning
Signed-off-by: Carlos Maiolino <cem@kernel.org>
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQSmtYVZ/MfVMGUq1GNcsMJ8RxYuYwUCaQXOZAAKCRBcsMJ8RxYu
Y43FAX9gZLSS+6U9NtjQXbwCzhKg0fPWMqt2eEhLxPF2bpNO7FmgecQKg3wZi0XC
gkhOqHYBfikmW5D/rUm0OMY7mBmyIMaSm0r77u82up08YZnc40LnMavH4+HAm15h
lhT/MhpJKQ==
=BJng
-----END PGP SIGNATURE-----
Merge tag 'xfs-fixes-6.18-rc4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Carlos Maiolino:
"Just a single bug fix (and documentation for the issue)"
* tag 'xfs-fixes-6.18-rc4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: document another racy GC case in xfs_zoned_map_extent
xfs: prevent gc from picking the same zone twice
- Formally adopt Kconfig in MAINTAINERS
- Fix install-extmod-build for more O= paths
- Align end of .modinfo to fix Authenticode calculation in EDK2
- Restore dynamic check for '-fsanitize=kernel-memory' in
CONFIG_HAVE_KMSAN_COMPILER to ensure backend target has support for
it
- Initialize locale in menuconfig and nconfig to fix UTF-8 terminals
that may not support VT100 ACS by default like PuTTY
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR74yXHMTGczQHYypIdayaRccAalgUCaQWN/gAKCRAdayaRccAa
ljUzAQCGh5zhfwsCfMc5M7/9v2FiEBKNzTc/xTK04vWdZ3A39QEA6XuyVx+QPBkS
ts7gPrR6NC7AokdqTHXKhBW/ebaNOw0=
=GmCb
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild fixes from Nathan Chancellor:
- Formally adopt Kconfig in MAINTAINERS
- Fix install-extmod-build for more O= paths
- Align end of .modinfo to fix Authenticode calculation in EDK2
- Restore dynamic check for '-fsanitize=kernel-memory' in
CONFIG_HAVE_KMSAN_COMPILER to ensure backend target has support
for it
- Initialize locale in menuconfig and nconfig to fix UTF-8 terminals
that may not support VT100 ACS by default like PuTTY
* tag 'kbuild-fixes-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kconfig/nconf: Initialize the default locale at startup
kconfig/mconf: Initialize the default locale at startup
KMSAN: Restore dynamic check for '-fsanitize=kernel-memory'
kbuild: align modinfo section for Secureboot Authenticode EDK2 compat
kbuild: install-extmod-build: Fix when given dir outside the build dir
MAINTAINERS: Update Kconfig section
To pick the changes from:
e19c062199 ("x86/cpufeatures: Add support for Assignable Bandwidth Monitoring Counters (ABMC)")
7b59c73fd6 ("x86/cpufeatures: Add SNP Secure TSC")
3c7cb84145 ("x86/cpufeatures: Add a CPU feature bit for MSR immediate form instructions")
2f8f173413 ("x86/vmscape: Add conditional IBPB mitigation")
a508cec6e5 ("x86/vmscape: Enumerate VMSCAPE bug")
This causes these perf files to be rebuilt and brings some X86_FEATURE
that may be used by:
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o
And addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
Please see tools/include/uapi/README for further details.
Cc: Babu Moger <babu.moger@amd.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Nikunj A Dadhania <nikunj@amd.com>
Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Xin Li <xin@zytor.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes in this cset:
56101b69c9 ("uprobes/x86: Add uprobe syscall to speed up uprobe")
That add support for this new 'uprobe' syscall in tools such as 'perf trace'.
Now it is possible to do a system wide 'perf trace' to look if this new
syscall is being used:
root@number:~# perf trace -v -e uprobe
<SNIP>
event qualifier tracepoint filter: (common_pid != 33989) && (id == 336)
^C
root@number#
$ grep -w uprobe tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
336 common uprobe sys_uprobe
$
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
Please see tools/include/uapi/README for further details.
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up the changes in this cset:
e83f0b5d10 ("nsfs: support exhaustive file handles")
That doesn't introduce anything of interest for tools/, just addresses
these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/perf/trace/beauty/include/uapi/linux/fcntl.h include/uapi/linux/fcntl.h
Please see tools/include/uapi/README for further details.
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up the changes in these csets:
8cdc4d2701 ("mm/huge_memory: respect MADV_COLLAPSE with PR_THP_DISABLE_EXCEPT_ADVISED")
9dc21bbd62 ("prctl: extend PR_SET_THP_DISABLE to optionally exclude VM_HUGEPAGE")
That don't introduce anything of interest for the tools/, just
addressing these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/perf/trace/beauty/include/uapi/linux/prctl.h include/uapi/linux/prctl.h
Please see tools/include/uapi/README for further details.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reading large compressed files is extremely slow when readahead is enabled.
For example, reading a 4 GB XPRESS-4K compressed file (compression ratio
≈ 4:1) takes about 230 minutes with readahead enabled, but only around 3
minutes when readahead is disabled.
The issue was first observed in January 2025 and is reproducible with large
compressed NTFS files. Disabling readahead for compressed files avoids this
performance regression, although this may not be the ideal long-term fix.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
To pick up changes from:
db2ab24a34 ("Add RWF_NOSIGNAL flag for pwritev2")
These are used to beautify fs syscall arguments, albeit the changes in
this update are not affecting those beautifiers.
This addresses these tools/ build warnings:
Warning: Kernel ABI header differences:
diff -u tools/perf/trace/beauty/include/uapi/linux/fs.h include/uapi/linux/fs.h
Please see tools/include/uapi/README for details (it's in the first patch
of this series).
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Lauri Vasama <git@vasama.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Call pm_runtime_resume_and_get() before accessing GCE hardware in
mbox_send_message(), and invoke pm_runtime_put_autosuspend() in the
cmdq callback to release the PM reference and start autosuspend for
GCE. This ensures correct power management for the GCE device.
Fixes: 8afe816b0c ("mailbox: mtk-cmdq-mailbox: Implement Runtime PM with autosuspend")
Signed-off-by: Jason-JH Lin <jason-jh.lin@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250829091727.3745415-3-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
The list operation to find and pop transaction entry appears several
times in transaction implementation, and can be replaced with a helper
functional macro.
Link: https://lore.kernel.org/r/20251101102131.925071-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
If an insn->alt points to a STAC/CLAC instruction, skip_alt_group()
assumes it's part of an alternative ("alt group") as opposed to some
other kind of "alt" such as an exception fixup.
While that assumption may hold true in the current code base, Linus has
an out-of-tree patch which breaks that assumption by replacing the
STAC/CLAC alternatives with raw STAC/CLAC instructions.
Make skip_alt_group() more robust by making sure it's actually an alt
group before continuing.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: 2d12c6fb78 ("objtool: Remove ANNOTATE_IGNORE_ALTERNATIVE from CLAC/STAC")
Closes: https://lore.kernel.org/CAHk-=wi6goUT36sR8GE47_P-aVrd5g38=VTRHpktWARbyE-0ow@mail.gmail.com
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://patch.msgid.link/3d22415f7b8e06a64e0873b21f48389290eeaa49.1761767616.git.jpoimboe@kernel.org
Fix bug where make nconfig doesn't initialize the default locale, which
causes ncurses menu borders to be displayed incorrectly (lqqqqk) in
UTF-8 terminals that don't support VT100 ACS by default, such as PuTTY.
Signed-off-by: Jakub Horký <jakub.git@horky.net>
Link: https://patch.msgid.link/20251014144405.3975275-2-jakub.git@horky.net
[nathan: Alphabetize locale.h include]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Fix bug where make menuconfig doesn't initialize the default locale, which
causes ncurses menu borders to be displayed incorrectly (lqqqqk) in
UTF-8 terminals that don't support VT100 ACS by default, such as PuTTY.
Signed-off-by: Jakub Horký <jakub.git@horky.net>
Link: https://patch.msgid.link/20251014154933.3990990-1-jakub.git@horky.net
[nathan: Alphabetize locale.h include]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
From XE3P we can now poll if the AUX power is up or down define the
timeouts for each respectively.
Bspec: 68967
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patch.msgid.link/20251101032513.4171255-25-suraj.kandpal@intel.com
We need to enable and disable the Tx for each active lane after the
Non-TBT enable sequence is done.
Bspec: 74500, 74497, 74701
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patch.msgid.link/20251101032513.4171255-21-suraj.kandpal@intel.com
Program LT Phy voltage swing using the Swing tables and plug in the
function at encoder->set_signal_level
Bspec: 74493
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patch.msgid.link/20251101032513.4171255-20-suraj.kandpal@intel.com
Hook up the LT Phy enable and disable sequences using encoder->
enable/disable_clock and reusing the TBT enable disable sequence from
cx0 PHY since it remains the same.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patch.msgid.link/20251101032513.4171255-18-suraj.kandpal@intel.com
Program in the steps for Non TBT PLL disable sequence.
The whole function can be defined in one shot since most of
prequiste functions are already coded in.
Bspec: 74492
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patch.msgid.link/20251101032513.4171255-17-suraj.kandpal@intel.com
Program the rest of the LT Phy Non TBT PLL Enable sequence. This
can be done in a single patch since the rest of the prequistie
functions are already coded in.
Bspec: 74492, 69701
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patch.msgid.link/20251101032513.4171255-16-suraj.kandpal@intel.com
Program the LT PHY P2P transaction which uses P2M cycle to get
get data fro Phy when it is ready and then go read the MAC register
from the MAC address space.
Bspec: 68966, 74497, 74483, 74500
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patch.msgid.link/20251101032513.4171255-14-suraj.kandpal@intel.com
Create a reverse algorithm which is used to find port clock
from the LT PHY state is provided which is used for
comparision & verification functions.
Bspec: 74667
Signed-off-by: Nemesa Garg <nemesa.garg@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20251101032513.4171255-13-suraj.kandpal@intel.com
We enable SSC when we program PORT_CLOCK_CTL register. We logically
determine if ssc is enabled or not while we calculate our state.
Bspec: 74492, 74667
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patch.msgid.link/20251101032513.4171255-12-suraj.kandpal@intel.com
When we get the eDP tables we reuse dp tables for some data rates.
We need to modify the 3rd config value of this table to 1 instead
of 0 since that is the only difference in the dp and edp table for
that particular data rate.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patch.msgid.link/20251101032513.4171255-11-suraj.kandpal@intel.com
Fetch the tables which need to be used and program it in
the specified VDR register space. Everything is done over
the respective lanes.
Bspec: 68862, 74500
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patch.msgid.link/20251101032513.4171255-10-suraj.kandpal@intel.com
Add the LT Phy programming recipe tables for eDP, DP & HDMI and a
function to use the correct table.
Bspec: 74667
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patch.msgid.link/20251101032513.4171255-9-suraj.kandpal@intel.com
