As the LSM framework only supports one LSM initcall callback for each
initcall type, the init_smk_fs() and smack_nf_ip_init() functions were
wrapped with a new function, smack_initcall() that is registered with
the LSM framework.
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johhansen@canonical.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Tested-by: Fan Wu <wufan@kernel.org>
Acked-by: Fan Wu <wufan@kernel.org>
Reviewed-by: John Johansen <john.johhansen@canonical.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Currently the individual LSMs register their own initcalls, and while
this should be harmless, it can be wasteful in the case where a LSM
is disabled at boot as the initcall will still be executed. This
patch introduces support for managing the initcalls in the LSM
framework, and future patches will convert the existing LSMs over to
this new mechanism.
Only initcall types which are used by the current in-tree LSMs are
supported, additional initcall types can easily be added in the future
if needed.
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johhansen@canonical.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Move the lsm_order_parse() function near the other lsm_order_*()
functions to improve readability.
No code changes.
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johhansen@canonical.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This will display all of the LSMs built into the kernel, regardless
of if they are enabled or not.
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johhansen@canonical.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Move away from an init specific init_debug() macro to a more general
lsm_pr()/lsm_pr_cont()/lsm_pr_dbg() set of macros that are available
both before and after init. In the process we do a number of minor
changes to improve the LSM initialization output and cleanup the code
somewhat.
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johhansen@canonical.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Add function header comments for lsm_static_call_init() and
early_security_init(), tweak the existing comment block for
security_add_hooks().
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johhansen@canonical.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
With only security_init() calling lsm_init_ordered, it makes little
sense to keep lsm_init_ordered() as a standalone function. Fold
lsm_init_ordered() into security_init().
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johhansen@canonical.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Rename initialize_lsm() to be more consistent with the rest of the LSM
initialization changes and rework the function itself to better fit
with the "exit on fail" coding pattern.
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Convert the lsm_blob_size fields to unsigned integers as there is no
current need for them to be negative, change "lsm_set_blob_size()" to
"lsm_blob_size_update()" to better reflect reality, and perform some
other minor cleanups to the associated code.
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Rename ordered_lsm_parse() to lsm_order_parse() for the sake of
consistency with the other LSM initialization routines, and also
do some minor rework of the function. Aside from some minor style
decisions, the majority of the rework involved shuffling the order
of the LSM_FLAG_LEGACY and LSM_ORDER_FIRST code so that the
LSM_FLAG_LEGACY checks are handled first; it is important to note
that this doesn't affect the order in which the LSMs are registered.
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johhansen@canonical.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Rename append_ordered_lsm() to lsm_order_append() to better match
convention and do some rework. The rework includes moving the
LSM_FLAG_EXCLUSIVE logic from lsm_prepare() to lsm_order_append()
in order to consolidate the individual LSM append/activation code,
and adding logic to skip appending explicitly disabled LSMs to the
active LSM list.
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johhansen@canonical.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Also add a header comment block to the function.
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johhansen@canonical.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
In addition to style changes, rename set_enabled() to lsm_enabled_set()
and is_enabled() to lsm_is_enabled() to better fit within the LSM
initialization code.
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johhansen@canonical.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The LSM currently has a lot of code to maintain a list of the currently
active LSMs in a human readable string, with the only user being the
"/sys/kernel/security/lsm" code. Let's drop all of that code and
generate the string on first use and then cache it for subsequent use.
Signed-off-by: Paul Moore <paul@paul-moore.com>
Move the LSM active count and lsm_id list declarations out of a header
that is visible across the kernel and into a header that is limited to
the LSM framework. This not only helps keep the include/linux headers
smaller and cleaner, it helps prevent misuse of these variables.
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johhansen@canonical.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Rename the builtin_lsm_order variable to lsm_order_builtin,
chosen_lsm_order to lsm_order_cmdline, chosen_major_lsm to
lsm_order_legacy, ordered_lsms[] to lsm_order[], and exclusive
to lsm_exclusive.
This patch also renames the associated kernel command line parsing
functions and adds some basic function comment blocks. The parsing
function choose_major_lsm() was renamed to lsm_choose_security(),
choose_lsm_order() to lsm_choose_lsm(), and enable_debug() to
lsm_debug_enable().
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Reduce the duplication between the lsm_id struct and the DEFINE_LSM()
definition by linking the lsm_id struct directly into the individual
LSM's DEFINE_LSM() instance.
Linking the lsm_id into the LSM definition also allows us to simplify
the security_add_hooks() function by removing the code which populates
the lsm_idlist[] array and moving it into the normal LSM startup code
where the LSM list is parsed and the individual LSMs are enabled,
making for a cleaner implementation with less overhead at boot.
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The new name more closely fits the rest of the naming scheme in
security/lsm_init.c. This patch also adds a trivial comment block to
the top of the function.
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johhansen@canonical.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
With only one caller of lsm_early_cred() and lsm_early_task(), insert
the functions' code directly into the caller and ger rid of the two
functions.
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johhansen@canonical.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
With only one caller of report_lsm_order(), insert the function's code
directly into the caller and ger rid of report_lsm_order().
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johhansen@canonical.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
There are three common for loop patterns in the LSM initialization code
to loop through the ordered LSM list and the registered "early" LSMs.
This patch implements these loop patterns as macros to help simplify the
code and reduce the chance for errors.
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johhansen@canonical.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Simplify and consolidate the lsm_allowed() and prepare_lsm() functions
into a new function, lsm_prepare().
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: John Johansen <john.johhansen@canonical.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Continue to pull code out of security/security.c to help improve
readability by pulling all of the LSM framework initialization
code out into a new file.
No code changes.
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
In an effort to decompose security/security.c somewhat to make it less
twisted and unwieldy, pull out the LSM notifier code into a new file
as it is fairly well self-contained.
No code changes.
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Reviewed-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
In the commit referenced by the Fixes tag, devm_clk_get_enabled() was
introduced to replace devm_clk_get() and clk_prepare_enable(). While
the clk_disable_unprepare() call in the error path was correctly
removed, the one in the remove function was overlooked, leading to a
double disable issue.
Remove the redundant clk_disable_unprepare() call from gsbi_remove()
to fix this issue. Since all resources are now managed by devres
and will be automatically released, the remove function serves no purpose
and can be deleted entirely.
Fixes: 489d7a8cc2 ("soc: qcom: use devm_clk_get_enabled() in gsbi_probe()")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/stable/20251020160215.523-1-vulab%40iscas.ac.cn
Link: https://lore.kernel.org/r/20251020160215.523-1-vulab@iscas.ac.cn
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the missing entries to the SMEM image table to ensure completeness,
rather than adding support for one image at a time.
Signed-off-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250929-image_crm-v1-2-e06530c42357@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The socinfo_image_names array is currently neither arranged alphabetically
nor by image index values, making it harder to maintain. Reorder the array
alphabetically to improve readability and simplify the addition of new
entries.
Signed-off-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250929-image_crm-v1-1-e06530c42357@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Make sure to drop the reference taken to the pbs platform device when
looking up its driver data.
Note that holding a reference to a device does not prevent its driver
data from going away so there is no point in keeping the reference.
Fixes: 5b2dd77be1 ("soc: qcom: add QCOM PBS driver")
Cc: stable@vger.kernel.org # 6.9
Cc: Anjelique Melendez <quic_amelende@quicinc.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20250926143511.6715-3-johan@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Make sure to drop the reference taken to the ocmem platform device when
looking up its driver data.
Note that holding a reference to a device does not prevent its driver
data from going away so there is no point in keeping the reference.
Also note that commit 0ff027027e ("soc: qcom: ocmem: Fix missing
put_device() call in of_get_ocmem") fixed the leak in a lookup error
path, but the reference is still leaking on success.
Fixes: 88c1e9404f ("soc: qcom: add OCMEM driver")
Cc: stable@vger.kernel.org # 5.5: 0ff027027e
Cc: Brian Masney <bmasney@redhat.com>
Cc: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20250926143511.6715-2-johan@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Document the Last Level Cache Controller on Kaanapali platform.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250924-knp-llcc-v1-1-ae6a016e5138@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The sq_head indicates the index directly in the submission queue when
the IORING_SETUP_NO_SQARRAY option is used, so use that instead of
skipping showing the entries.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
System On Chip Control Processor (SOCCP) is a subsystem that can have
battery management firmware running on it to support Type-C/PD and
battery charging. SOCCP does not have multiple PDs and hence PDR is not
supported. So, if the subsystem comes up/down, rpmsg driver would be
probed or removed. Use that for notifying clients of pmic_glink for
PDR events.
Add support for battery management FW running on SOCCP by adding the
"PMIC_RTR_SOCCP_APPS" channel name to the rpmsg_match list and
updating notify_clients logic.
Signed-off-by: Anjelique Melendez <anjelique.melendez@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250919175025.2988948-1-anjelique.melendez@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The 'Agera' PLLs (with clk_agera_pll_configure) do not take some of the
parameters that are provided in the vendor driver. Instead the upstream
configuration should provide the final user_ctl value that is written to
the USER_CTL register.
Fix the config so that the PLL is configured correctly.
Fixes: 9f0532da42 ("clk: qcom: Add Camera Clock Controller driver for SM7150")
Suggested-by: Taniya Das <taniya.das@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251021-agera-pll-fixups-v1-2-8c1d8aff4afc@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The 'Agera' PLLs (with clk_agera_pll_configure) do not take some of the
parameters that are provided in the vendor driver. Instead the upstream
configuration should provide the final user_ctl value that is written to
the USER_CTL register.
Fix the config so that the PLL is configured correctly, and fixes
CAMCC_MCLK* being stuck off.
Fixes: 80f5451d9a ("clk: qcom: Add camera clock controller driver for SM6350")
Suggested-by: Taniya Das <taniya.das@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Taniya Das <taniya.das@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251021-agera-pll-fixups-v1-1-8c1d8aff4afc@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
NSS (Network Subsystem) clock controller provides the clocks and resets
to the networking hardware blocks of the IPQ5424 SoC.
The icc-clk framework is used to enable NoC related clocks to create
paths so that the networking blocks can connect to these NoCs.
Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Link: https://lore.kernel.org/r/20251014-qcom_ipq5424_nsscc-v7-8-081f4956be02@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The clock gpll0_out_aux acts as the parent clock for some of the NSS
(Network Subsystem) clocks.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Link: https://lore.kernel.org/r/20251014-qcom_ipq5424_nsscc-v7-6-081f4956be02@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add NSS NoC clocks using the icc-clk framework to create interconnect
paths. The network subsystem (NSS) can be connected to these NoCs.
Additionally, add the LPASS CNOC and SNOC nodes to establish the complete
interconnect path.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251014-qcom_ipq5424_nsscc-v7-4-081f4956be02@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Update to use the expected icc_first_node_id for registering the icc
clocks, ensuring correct association of clocks with interconnect nodes.
Fixes: 170f3d2c06 ("clk: qcom: ipq5424: Use icc-clk for enabling NoC related clocks")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Link: https://lore.kernel.org/r/20251014-qcom_ipq5424_nsscc-v7-1-081f4956be02@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
NSS clock controller provides the clocks and resets to the networking
blocks such as PPE (Packet Process Engine) and UNIPHY (PCS) on IPQ5424
devices.
Add support for the compatible string "qcom,ipq5424-nsscc" based on the
existing IPQ9574 NSS clock controller Device Tree binding. Additionally,
update the clock names for PPE and NSS for newer SoC additions like
IPQ5424 to use generic and reusable identifiers "nss" and "ppe" without
the clock rate suffix.
Also add master/slave ids for IPQ5424 networking interfaces, which is
used by nss-ipq5424 driver for providing interconnect services using
icc-clk framework.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Link: https://lore.kernel.org/r/20251014-qcom_ipq5424_nsscc-v7-7-081f4956be02@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the NSSNOC master/slave ids for Qualcomm IPQ5424 network subsystem
(NSS) hardware blocks. These will be used by the gcc-ipq5424 driver
that provides the interconnect services by using the icc-clk framework.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Acked-by: Georgi Djakov <djakov@kernel.org>
Link: https://lore.kernel.org/r/20251014-qcom_ipq5424_nsscc-v7-3-081f4956be02@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Networking Subsystem (NSS) clock controller acts as both a clock
provider and an interconnect provider. The #interconnect-cells property
is needed in the Device Tree Source (DTS) to ensure that client drivers
such as the PPE driver can correctly acquire ICC clocks from the NSS ICC
provider.
Add the #interconnect-cells property to the IPQ9574 Device Tree binding
example to complete it.
Fixes: 28300ecedc ("dt-bindings: clock: Add ipq9574 NSSCC clock and reset definitions")
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Link: https://lore.kernel.org/r/20251014-qcom_ipq5424_nsscc-v7-2-081f4956be02@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The USB4 HPG says this frequency remains unused, remove it from the
frequency table to avoid any misunderstandings.
The reason it's unused seems to be that the lower RPMh level required
to support it (LOW_SVS) is not enough for other pieces of the pipeline
which require SVS, which in turn is enough to support a faster, 175-ish
MHz rate.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20251010-topic-gcc_usb4_unused_freq-v1-3-4be5e77d2307@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The USB4 HPG says this frequency remains unused, remove it from the
frequency table to avoid any misunderstandings.
The reason it's unused seems to be that the lower RPMh level required
to support it (LOW_SVS) is not enough for other pieces of the pipeline
which require SVS, which in turn is enough to support a faster, 175 MHz
rate.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20251010-topic-gcc_usb4_unused_freq-v1-2-4be5e77d2307@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The USB4 HPG says this frequency remains unused, remove it from the
frequency table to avoid any misunderstandings.
The reason it's unused seems to be that the lower RPMh level required
to support it (LOW_SVS) is not enough for other pieces of the pipeline
which require SVS, which in turn is enough to support a faster, 175 MHz
rate.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20251010-topic-gcc_usb4_unused_freq-v1-1-4be5e77d2307@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The find_user_dsq() function is called from contexts that are already
under RCU read lock protection. Switch from rhashtable_lookup_fast() to
rhashtable_lookup() to avoid redundant RCU locking.
Requires: bee8a520eb ("rhashtable: Use rcu_dereference_all and rcu_dereference_all_check")
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
