It is possible to select CONFIG_SM_GCC_6350 when targeting ARCH=arm,
causing a Kconfig warning when selecting CONFIG_SM_GCC_6350 without
its dependencies, CONFIG_ARM64 or CONFIG_COMPILE_TEST.
WARNING: unmet direct dependencies detected for SM_GCC_6350
Depends on [n]: COMMON_CLK [=y] && COMMON_CLK_QCOM [=m] && (ARM64 || COMPILE_TEST [=n])
Selected by [m]:
- SM_VIDEOCC_6350 [=m] && COMMON_CLK [=y] && COMMON_CLK_QCOM [=m]
Add the same dependency to clear up the warning.
Cc: stable@vger.kernel.org
Fixes: 720b1e8f20 ("clk: qcom: Add video clock controller driver for SM6350")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Imran Shaik <imran.shaik@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250930-clk-qcom-kconfig-fixes-arm-v1-1-15ae1ae9ec9f@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The pipe clocks for PCIE and USB are externally sourced and they should
not be polled by the clock driver. Update the halt_check flags to 'SKIP'
to disable polling for these clocks.
This helps avoid the clock status stuck at 'off' warnings, which are
benign, since all consumers of the PHYs must initialize a given instance
before performing any operations.
Fixes: efe504300a ("clk: qcom: gcc: Add support for Global Clock Controller")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Imran Shaik <imran.shaik@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250925-glymur_gcc_usb_fixes-v2-1-ee4619571efe@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The pnt_seq field and related infrastructure were originally named for
"pick next task sequence", reflecting their original implementation in
scx_next_task_picked(). However, the sequence counter is now incremented in
both put_prev_task_scx() and pick_task_scx() and its purpose is to
synchronize kick operations via SCX_KICK_WAIT, not specifically to track
pick_next_task events.
Rename to better reflect the actual semantics:
- pnt_seq -> kick_sync
- scx_kick_pseqs -> scx_kick_syncs
- pseqs variables -> ksyncs
- Update comments to refer to "kick_sync sequence" instead of "pick_task
sequence"
This is a pure renaming with no functional changes.
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
SCX_KICK_WAIT is used to synchronously wait for the target CPU to complete
a reschedule and can be used to implement operations like core scheduling.
This used to be implemented by scx_next_task_picked() incrementing pnt_seq,
which was always called when a CPU picks the next task to run, allowing
SCX_KICK_WAIT to reliably wait for the target CPU to enter the scheduler and
pick the next task.
However, commit b999e365c2 ("sched_ext: Replace scx_next_task_picked()
with switch_class()") replaced scx_next_task_picked() with the
switch_class() callback, which is only called when switching between sched
classes. This broke SCX_KICK_WAIT because pnt_seq would no longer be
reliably incremented unless the previous task was SCX and the next task was
not.
This fix leverages commit 4c95380701 ("sched/ext: Fold balance_scx() into
pick_task_scx()") which refactored the pick path making put_prev_task_scx()
the natural place to track task switches for SCX_KICK_WAIT. The fix moves
pnt_seq increment to put_prev_task_scx() and also increments it in
pick_task_scx() to handle cases where the same task is re-selected, whether
by BPF scheduler decision or slice refill. The semantics: If the current
task on the target CPU is SCX, SCX_KICK_WAIT waits until the CPU enters the
scheduling path. This provides sufficient guarantee for use cases like core
scheduling while keeping the operation self-contained within SCX.
v2: - Also increment pnt_seq in pick_task_scx() to handle same-task
re-selection (Andrea Righi).
- Use smp_cond_load_acquire() for the busy-wait loop for better
architecture optimization (Peter Zijlstra).
Reported-by: Wen-Fang Liu <liuwenfang@honor.com>
Link: http://lkml.kernel.org/r/228ebd9e6ed3437996dffe15735a9caa@honor.com
Cc: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
When a sched_ext scheduler tries to kick a CPU, the CPU may be running a
higher class task. sched_ext has no control over such CPUs. A sched_ext
scheduler couldn't have expected to get access to the CPU after kicking it
anyway. Skip kicking when the target CPU is running a higher class.
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The SD card support requires a 37.5MHz clock; add it to the frequency
list for the storage SW driver to be able to request for the frequency.
Fixes: 3267c774f3 ("clk: qcom: Add support for GCC on SM8750")
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Imran Shaik <imran.shaik@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250924-sm8750_gcc_sdcc2_frequency-v1-1-541fd321125f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Set CLK_OPS_PARENT_ENABLE to ensure the parent gets prepared and enabled
when switching to it, fixing an "rcg didn't update its configuration"
warning.
Signed-off-by: Jens Reidel <adrian@mainlining.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250919-sm7150-dispcc-fixes-v1-3-308ad47c5fce@mainlining.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the offsets for two resets inside the dispcc on SM6350 SoC.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250919-sm6350-mdss-reset-v1-2-48dcac917c73@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This was previously (mis)represented in the interconnect driver, move
the resource under the clk-rpmh driver control, just like we did for
all platforms in the past, see e.g. Commit aa055bf158 ("clk: qcom:
rpmh: define IPA clocks where required")
Fixes: 42a1905a10 ("clk: qcom: rpmhcc: Add support for QCS615 Clocks")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250627-topic-qcs615_icc_ipa-v1-4-dc47596cde69@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
When a consumer turns on/off a power domain dependent on another power
domain in hardware, the parent power domain shall be turned on/off by
the power domain provider as well, and to get it the power domain hardware
hierarchy shall be described in the CAMCC driver.
Establish the power domain hierarchy with a Titan GDSC set as a parent of
other GDSC power domains provided by the SM8450 camera clock controller,
including IPE, BPS and SBI ones.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Imran Shaik <imran.shaik@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20251021234450.2271279-7-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
When a consumer turns on/off a power domain dependent on another power
domain in hardware, the parent power domain shall be turned on/off by
the power domain provider as well, and to get it the power domain hardware
hierarchy shall be described in the CAMCC driver.
Establish the power domain hierarchy with a Titan GDSC set as a parent of
other GDSC power domains provided by the SM8250 camera clock controller,
including IPE, BPS and SBI ones.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Imran Shaik <imran.shaik@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20251021234450.2271279-6-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
When a consumer turns on/off a power domain dependent on another power
domain in hardware, the parent power domain shall be turned on/off by
the power domain provider as well, and to get it the power domain hardware
hierarchy shall be described in the CAMCC driver.
Establish the power domain hierarchy with a Titan GDSC set as a parent of
other GDSC power domains provided by the SM7150 camera clock controller,
including IPE0/1 and BPS ones.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Imran Shaik <imran.shaik@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20251021234450.2271279-5-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
When a consumer turns on/off a power domain dependent on another power
domain in hardware, the parent power domain shall be turned on/off by
the power domain provider as well, and to get it the power domain hardware
hierarchy shall be properly described in the power domain provider driver.
Establish the power domain hierarchy with a Titan GDSC set as a parent of
other GDSC power domains provided by the SDM845 camera clock controller,
including IPE0/1 and BPS ones.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Imran Shaik <imran.shaik@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20251021234450.2271279-4-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
When a consumer turns on/off a power domain dependent on another power
domain in hardware, the parent power domain shall be turned on/off by
the power domain provider as well, and to get it the power domain hardware
hierarchy shall be described in the CAMCC driver.
Establish the power domain hierarchy with a Titan GDSC set as a parent of
all other GDSC power domains provided by the SM6350 camera clock controller
to enforce a correct sequence of enabling and disabling power domains by
the consumers, this fixes the CAMCC as a supplier of power domains to CAMSS
IP and its driver.
Fixes: 80f5451d9a ("clk: qcom: Add camera clock controller driver for SM6350")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Imran Shaik <imran.shaik@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20251021234450.2271279-3-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
When a consumer turns on/off a power domain dependent on another power
domain in hardware, the parent power domain shall be turned on/off by
the power domain provider as well, and to get it the power domain hardware
hierarchy shall be described in the CAMCC driver.
Establish the power domain hierarchy with a Titan GDSC set as a parent of
all other GDSC power domains provided by the SM8550 camera clock controller
to enforce a correct sequence of enabling and disabling power domains by
the consumers, this fixes the CAMCC as a supplier of power domains to CAMSS
IP and its driver.
Fixes: ccc4e6a061 ("clk: qcom: camcc-sm8550: Add camera clock controller driver for SM8550")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Imran Shaik <imran.shaik@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Link: https://lore.kernel.org/r/20251021234450.2271279-2-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Move azoteq,iqs5xx.yaml, himax,hx83112b.yaml, hynitron,cstxxx.yaml,
ilitek_ts_i2c.yaml, semtech,sx8654.yaml, ar1021.txt to trivial-touch.yaml
to consolidate simple touch yaml binding to one file.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251021201924.2881098-2-Frank.Li@nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Send an event to userspace when a performance domain is created or deleted,
or its energy model is updated.
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/20251020220914.320832-11-changwoo@igalia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Implement two event notifications when a performance domain is created
(EM_CMD_PD_CREATED) and updated (EM_CMD_PD_UPDATED). The message format
of these two event notifications is the same as EM_CMD_GET_PD_TABLE --
containing the performance domain's ID and its energy model table.
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/20251020220914.320832-10-changwoo@igalia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add the event notification infrastructure and implement the event
notification for when a performance domain is deleted (EM_CMD_PD_DELETED).
The event contains the ID of the performance domain (EM_A_PD_TABLE_PD_ID)
so the userspace can identify the changed performance domain for further
processing.
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/20251020220914.320832-9-changwoo@igalia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When a userspace requests EM_CMD_GET_PD_TABLE with an ID of a performance
domain, the kernel reports back the energy model table of the specified
performance domain. The message format of the response is as follows:
EM_A_PD_TABLE_PD_ID (NLA_U32)
EM_A_PD_TABLE_PS (NLA_NESTED)*
EM_A_PS_PERFORMANCE (NLA_U64)
EM_A_PS_FREQUENCY (NLA_U64)
EM_A_PS_POWER (NLA_U64)
EM_A_PS_COST (NLA_U64)
EM_A_PS_FLAGS (NLA_U64)
where EM_A_PD_TABLE_PS can be repeated as many times as there are
performance states (struct em_perf_state).
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/20251020220914.320832-8-changwoo@igalia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When a userspace requests EM_CMD_GET_PDS, the kernel responds with
information on all performance domains. The message format of the
response is as follows:
EM_A_PDS_PD (NLA_NESTED)*
EM_A_PD_PD_ID (NLA_U32)
EM_A_PD_FLAGS (NLA_U64)
EM_A_PD_CPUS (NLA_STRING)
where EM_A_PDS_PD can be repeated as many times as there are performance
domains, and EM_A_PD_CPUS is a hexadecimal string representing a CPU
bitmask.
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/20251020220914.320832-7-changwoo@igalia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add an iterator function (for_each_em_perf_domain) that iterates all the
performance domains in the global list. A passed callback function (cb) is
called for each performance domain.
Additionally, add a lookup function (em_perf_domain_get_by_id) that
searches for a performance domain by matching the ID in the global list.
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/20251020220914.320832-6-changwoo@igalia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add a boilerplate code for netlink notification to register the new
protocol family. Also, initialize and register the netlink during booting.
The initialization is called at the postcore level, which is late enough
after the generic netlink is initialized.
Finally, update MAINTAINERS to include new files.
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/20251020220914.320832-5-changwoo@igalia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add a generic netlink spec in YAML format and autogenerate boilerplate
code using ynl-regen.sh to introduce a generic netlink for the energy
model. It allows a userspace program to read the performance domain and
its energy model. It notifies the userspace program when a performance
domain is created or deleted or its energy model is updated through a
multicast interface.
Specifically, it supports two commands:
- EM_CMD_GET_PDS: Get the list of information for all performance
domains.
- EM_CMD_GET_PD_TABLE: Get the energy model table of a performance
domain.
Also, it supports three notification events:
- EM_CMD_PD_CREATED: When a performance domain is created.
- EM_CMD_PD_DELETED: When a performance domain is deleted.
- EM_CMD_PD_UPDATED: When the energy model table of a performance domain
is updated.
Finally, update MAINTAINERS to include new files.
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/20251020220914.320832-4-changwoo@igalia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
For ease of debugging, let's expose the assigned ID of a performance
domain through debugfs (e.g., /sys/kernel/debug/energy_model/cpu0/id).
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/20251020220914.320832-3-changwoo@igalia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It is necessary to refer to a specific performance domain from a
userspace. For example, the energy model of a particular performance
domain is updated.
To this end, assign a unique ID to each performance domain to address it,
and manage them in a global linked list to look up a specific one by
matching ID. IDA is used for ID assignment, and the mutex is used to
protect the global list from concurrent access.
Note that the mutex (em_pd_list_mutex) is not supposed to hold while
holding em_pd_mutex to avoid ABBA deadlock.
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/20251020220914.320832-2-changwoo@igalia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Make acpi_button_add() call input_free_device() when
input_register_device() fails as required according to the
documentation of the latter.
Fixes: 0d51157dfa ("ACPI: button: Eliminate the driver notify callback")
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Cc: 6.5+ <stable@vger.kernel.org> # 6.5+
[ rjw: Subject and changelog rewrite, Fixes: tag ]
Link: https://patch.msgid.link/20251006084706.971855-1-kaushlendra.kumar@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
DMC_EVT_CTL_ENABLE cannot be cleared once set. So currently
any event we never enable will have DMC_EVT_CTL_ENABLE cleared,
whereas any event which has been enabled even once will have
DMC_EVT_CTL_ENABLE set. For that reason assert_dmc_loaded() has
a special case to ignore any mismatches in DMC_EVT_CTL_ENABLE.
Eliminate the special case by always configuring DMC_EVT_CTL_ENABLE
based on the original firmware event definition. Now all
event handlers will have DMC_EVT_CTL_ENABLE set, whether or
not the event has been enabled in the past.
All disabled event handlers will still have the event type set
to DMC_EVENT_FALSE so they will not actually trigger despite
DMC_EVT_CTL_ENABLE being set.
Tested-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251022100718.24803-4-ville.syrjala@linux.intel.com
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Tested-by: Imre Deak <imre.deak@intel.com>
TGL/ADL-S DMC firmware incorrectly uses the undelayed vblank
trigger for the HRR event, when it should be using the delayed
vblank trigger.
Fixed DMC firmware was never relaesed and isntead the Windows
driver just fixes this up by hand. Follow suit.
Not that we actually enable the HRR event currently. But let's
fix up the event ID, just in case someone ever needs to enable
this.
Tested-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251022100718.24803-3-ville.syrjala@linux.intel.com
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Tested-by: Imre Deak <imre.deak@intel.com>
On ADL-S the main DMC HRR event DMC_EVT_CTL/HTP are never
restored to their previous values during DC6 exit. This
angers assert_dmc_loaded(), and basically makes the HRR
handler unusable because we don't rewrite EVT_HTP when
enabling DMC events.
Let's just clear the HRR EVT_CTL/HTP to zero from the
beginnning so that the expected value matches the post-DC6
reality.
I suppose if we ever had actual use for HRR we'd have to both,
reject HRR+PSR, and reprogram EVT_HTP when enabling the event.
But for now we don't care about HRR so keeping both registers
zeroed is fine.
Cc: stable@vger.kernel.org
Tested-by: Petr Vorel <pvorel@suse.cz>
Fixes: 43175c92d4 ("drm/i915/dmc: Assert DMC is loaded harder")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15153
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251022100718.24803-2-ville.syrjala@linux.intel.com
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Tested-by: Imre Deak <imre.deak@intel.com>
While the user manual states that the PLL's rate should be between 180
MHz and 3 GHz in the register defninition section, it also says the
actual operating frequency is 22.5792*4 MHz in the PLL features table.
22.5792*4 MHz is one of the actual clock rates that we want and is
is available in the SDM table. Lower the minimum clock rate to 90 MHz
so that both rates in the SDM table can be used.
Fixes: 7cae1e2b55 ("clk: sunxi-ng: Add support for the A523/T527 CCU PLLs")
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251020171059.2786070-7-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
The "bus-r-dma" clock in the A523's PRCM clock controller is also
referred to as "DMA_CLKEN_SW" or "DMA ADB400 gating". It is unclear how
this ties into the DMA controller MBUS clock gate; however if the clock
is not enabled, the DMA controller in the MCU block will fail to access
DRAM, even failing to retrieve the DMA descriptors.
Mark this clock as critical. This sort of mirrors what is done for the
main DMA controller's MBUS clock, which has a separate toggle that is
currently left out of the main clock controller driver.
Fixes: 8cea339cfb ("clk: sunxi-ng: add support for the A523/T527 PRCM CCU")
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251020171059.2786070-6-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
The intel_crtc_state::fec_enable check in intel_dp_needs_8b10b_fec() is
redundant drop it: originally it ensured that the FEC enabled state for
a CRTC other than the CRTC intel_dp_needs_8b10b_fec() called for is
preserved, even if DSC is not enabled for the latter CRTC. The way FEC
gets enabled for all the CRTCs on an 8b10b MST link is changed by
commit 7c027070e9 ("drm/i915/dp_mst: Track DSC enabled status on the
MST link") and
commit 470b84af45 ("drm/i915/dp_mst: Recompute all MST link CRTCs if
DSC gets enabled on the link")
depending on intel_dsc_enabled_on_link() in intel_dp_needs_8b10b_fec()
instead of the above fec_enable check. Drop the check.
Suggested-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20251020154438.416761-1-imre.deak@intel.com
Handle the BLKTRACESETUP2 ioctl, requesting an extended version of the
blktrace protocol from user-space.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Trace zone write plugging operations on block devices.
As tracing of zoned block commands needs the upper 32bit of the widened
64bit action, only add traces to blktrace if user-space has requested
version 2 of the blktrace protocol.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Expose ZONE APPEND completions as a block trace completion action to
blktrace.
As tracing of zoned block commands needs the upper 32bit of the widened
64bit action, only add traces to blktrace if user-space has requested
version 2 of the blktrace protocol.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add block trace commands for zone operations. These commands can only be
handled with version 2 of the blktrace protocol. For version 1, warn if a
command that does not fit into the 16 bits reserved for the command in
this version is passed in.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move ftrace's blk_io_tracer to the new blk_io_trace2 infrastructure.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move trace_note() to the new blk_io_trace2 infrastructure.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Differentiate between blk_io_trace and blk_io_trace2 when relaying to
user-space depending on which version has been requested by the blktrace
utility.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add definitions for the extended version of the blktrace protocol using a
wider action type to be able to record new actions in the kernel.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
