If the location madvise() is set to
DRM_XE_PREFERRED_LOC_DEFAULT_SYSTEM, the drm_pagemap in the
SVM gpu fault handler will be set to NULL. However there is nothing
that explicitly migrates the data to system if it is already present
in device memory.
In that case, set the device memory owner to NULL to ensure
data gets properly migrated to system on page-fault.
v2:
- Remove redundant dpagemap assignment (Himal Prasad Ghimiray)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com> #v1
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://lore.kernel.org/r/20251010104149.72783-2-thomas.hellstrom@linux.intel.com
Fixes: 10aa5c8060 ("drm/gpusvm, drm/xe: Fix userptr to not allow device private pages")
There is a spelling mistake in HID description. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
drivers/net/wan/hdlc_ppp.c: In function ‘ppp_cp_event’:
drivers/net/wan/hdlc_ppp.c:353:17: warning: ‘%s’ directive argument is null [-Wformat-overflow=]
353 | netdev_info(dev, "%s down\n", proto_name(pid));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/wan/hdlc_ppp.c:342:17: warning: ‘%s’ directive argument is null [-Wformat-overflow=]
342 | netdev_info(dev, "%s up\n", proto_name(pid));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Update proto_name() to return "LCP" by default instead of NULL.
This change silences the compiler without changing existing behavior
and removes the need for the local 'pname' variable in ppp_cp_event.
Suggested-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Kriish Sharma <kriish.sharma2006@gmail.com>
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Link: https://patch.msgid.link/20251013014319.1608706-1-kriish.sharma2006@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The function `guc_ct_send_locked()` is really quite simple, but still
looks complex due to exposed internals. It is sending a message,
and in case of lack of space, waiting for a proper moment to send
a retry.
Clear separation of send function and wait function will help with
readability. This is a cosmetic change only, no functional difference
is expected.
This patch introduces `guc_ct_send_wait_for_retry()`, and uses it to
greatly simplify `guc_ct_send_locked()`.
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://lore.kernel.org/r/20251009170844.178199-1-tomasz.lis@intel.com
Completion napi can free out-of-order tx descriptors if hw QoS is
enabled and packets with different priority are queued to same DMA ring.
Take into account possible out-of-order reports checking if the tx queue
is full using circular buffer head/tail pointer instead of the number of
queued packets.
Fixes: 23020f0493 ("net: airoha: Introduce ethernet support for EN7581 SoC")
Suggested-by: Simon Horman <horms@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251012-airoha-tx-busy-queue-v2-1-a600b08bab2d@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Neal reported that using neper tcp_stream with TCP_TX_DELAY
set to 50ms would often lead to flows stuck in a small cwnd mode,
regardless of the congestion control.
While tcp_stream sets TCP_TX_DELAY too late after the connect(),
it highlighted two kernel bugs.
The following heuristic in tcp_tso_should_defer() seems wrong
for large RTT:
delta = tp->tcp_clock_cache - head->tstamp;
/* If next ACK is likely to come too late (half srtt), do not defer */
if ((s64)(delta - (u64)NSEC_PER_USEC * (tp->srtt_us >> 4)) < 0)
goto send_now;
If next ACK is expected to come in more than 1 ms, we should
not defer because we prefer a smooth ACK clocking.
While blamed commit was a step in the good direction, it was not
generic enough.
Another patch fixing TCP_TX_DELAY for established flows
will be proposed when net-next reopens.
Fixes: 50c8339e92 ("tcp: tso: restore IW10 after TSO autosizing")
Reported-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Tested-by: Neal Cardwell <ncardwell@google.com>
Link: https://patch.msgid.link/20251011115742.1245771-1-edumazet@google.com
[pabeni@redhat.com: fixed whitespace issue]
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Temporarily change CONFIG_HID_HAPTIC to be bool instead of tristate, until
we implement a permanent solution.
Recently the CONFIG_HID_HAPTIC Kconfig option was reported as causing
the following build errors:
MODPOST Module.symvers
ERROR: modpost: "hid_haptic_init" [drivers/hid/hid-multitouch.ko] undefined!
ERROR: modpost: "hid_haptic_pressure_increase" [drivers/hid/hid-multitouch.ko] undefined!
ERROR: modpost: "hid_haptic_check_pressure_unit" [drivers/hid/hid-multitouch.ko] undefined!
ERROR: modpost: "hid_haptic_input_configured" [drivers/hid/hid-multitouch.ko] undefined!
ERROR: modpost: "hid_haptic_input_mapping" [drivers/hid/hid-multitouch.ko] undefined!
ERROR: modpost: "hid_haptic_feature_mapping" [drivers/hid/hid-multitouch.ko] undefined!
ERROR: modpost: "hid_haptic_pressure_reset" [drivers/hid/hid-multitouch.ko] undefined!
make[3]: *** [/home/thl/var/linux.dev/scripts/Makefile.modpost:147: Module.symvers] Error 1
when the kernel is compiled with the following configuration:
CONFIG_HID=y
CONFIG_HID_MULTITOUCH=m
CONFIG_HID_HAPTIC=m
To resolve this, temporarily change the CONFIG_HID_HAPTIC option to be
bool, until we arrive at a permanent solution to enable CONFIG_HID_HAPTIC
to be tristate.
For a more detailed discussion, see [1].
[1]: https://lore.kernel.org/linux-input/auypydfkhx2eg7vp764way4batdilzc35inqda3exwzs3tk3ff@oagat6g46zto/
Signed-off-by: Jonathan Denose <jdenose@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
rtl8152_driver_init() is missing the error handling.
When rtl8152_driver registration fails, rtl8152_cfgselector_driver
should be deregistered.
Fixes: ec51fbd1b8 ("r8152: add USB device driver for config selection")
Cc: stable@vger.kernel.org
Signed-off-by: Yi Cong <yicong@kylinos.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251011082415.580740-1-yicongsrfy@163.com
[pabeni@redhat.com: clarified the commit message]
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The tablet is similar to the 22R Pro, but with a few annoying
differences. Its descriptors are bigger because of the tablet's split
coordinate system, I guess it's just that large. Thankfully, this is
easy enough to support as all we have to do is shift bytes around.
To help code re-use, I changed the signature of
uclogic_params_init_ugee_xppen_pro to accept a pen descriptor so we
didn't create yet-another initialization function.
I have been testing this locally for a month or so and it works great,
and also corroborated this with a few other testers. Since this touches
my 22R Pro code, I have tested and checked that it didn't regress that
device.
Signed-off-by: Joshua Goins <josh@redstrate.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Some controllers are very bad at updating the IMU, leading to these
messages spamming the syslog. Rate-limiting them helps with this a bit.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Some third-party controllers, such as the PB Tails CHOC, won't always
respond quickly on startup. Since this packet is needed for probe, and only
once during probe, let's just wait an extra second, which makes connecting
consistent.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
hid_warn_ratelimited() is needed. Add the others as part of the block.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Currently, hidpp_send_message_sync() retries sending the message when the
device returns a busy error code, specifically HIDPP20_ERROR_BUSY, which
has a different meaning under RAP. This ends up being a problem because
this function is used for both FAP and RAP messages.
This issue is not noticeable on older receivers with unreachable devices
since they return HIDPP_ERROR_RESOURCE_ERROR (0x09), which is not equal to
HIDPP20_ERROR_BUSY (0x08).
However, newer receivers return HIDPP_ERROR_UNKNOWN_DEVICE (0x08) which
happens to equal to HIDPP20_ERROR_BUSY, causing unnecessary retries when
the device is not actually busy.
This is resolved by checking if the error response is FAP or RAP and
picking the respective ERROR_BUSY code.
Fixes: 60165ab774 ("HID: logitech-hidpp: rework one more time the retries attempts")
Signed-off-by: Mavroudis Chatzilazaridis <mavchatz@protonmail.com>
Tested-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
When logitech-hidpp tries to communicate with an unreachable device paired
to a 046d:c547 lightspeed receiver, the following message is printed to the
console:
hidpp_root_get_protocol_version: received protocol error 0x08
This occurs because this receiver returns 0x08 (HIDPP_ERROR_UNKNOWN_DEVICE)
when a device is unreachable, compared to 0x09 (HIDPP_ERROR_RESOURCE_ERROR)
that the older receivers return.
This patch silences this harmless error by treating
HIDPP_ERROR_UNKNOWN_DEVICE the same as HIDPP_ERROR_RESOURCE_ERROR
in hidpp_root_get_protocol_version().
There are other checks for HIDPP_ERROR_RESOURCE_ERROR found in
battery-related functions, however this receiver does not trigger them when
the device is disconnected.
Signed-off-by: Mavroudis Chatzilazaridis <mavchatz@protonmail.com>
Tested-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This lightspeed receiver uses 13 byte mouse reports without an ID.
There are 5 additional vendor defined bytes appended to the report.
The workaround for such cases has been adjusted to handle these larger
reports.
The keyboard reports have a distinct layout with differing minimums and
maximums. Additionally, the LED reports now require a report ID of 1.
New keyboard and mouse descriptors have been added to reflect these
changes.
The devices attached to this receiver now report the status of their
battery in wireless mode, libratbag communicates with them and they can
be configured with Piper.
Fixes: 9d1bd93462 ("HID: logitech-dj: Add support for a new lightspeed receiver iteration")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218172
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218094
Co-developed-by: Filipe Laíns <lains@riseup.net>
Signed-off-by: Filipe Laíns <lains@riseup.net>
Signed-off-by: Mavroudis Chatzilazaridis <mavchatz@protonmail.com>
Tested-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Add hw_brightness_changed support for the G510 keyboard, so that e.g.
GNOME will show an OSD notification when toggling the backlight on/off
with the button the keyboard.
Note that it is not possible to turn the backlight back on by writing
/sys/class/leds/.../brightness it can only be turned on by pressing
the button on the keyboard. To reflect this /sys/class/leds/.../brightness
will always report the last brightness value independent of the on/off
toggle built into the keyboard.
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This patch adds ALWAYS_POLL quirk for the VRS R295 steering wheel joystick.
This device reboots itself every 8-10 seconds if it is not polled.
Signed-off-by: Oleg Makarenko <oleg@makarenk.ooo>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The Cooler Master Mice Dongle includes a vendor defined HID interface
alongside its mouse interface. Not polling it will cause the mouse to
stop responding to polls on any interface once woken up again after
going into power saving mode.
Add the HID_QUIRK_ALWAYS_POLL quirk alongside the Cooler Master VID and
the Dongle's PID.
Signed-off-by: Tristan Lobb <tristan.lobb@it-lobb.de>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Add the missing PCI ID for the quickspi device used on
the Lenovo Yoga Pro 9i 16IAH10.
Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=220567
Signed-off-by: Abhishek Tamboli <abhishektamboli9@gmail.com>
Reviewed-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
We should try to get rid of checks that depend on struct
drm_i915_private (or struct xe_device) in display code. HAS_FLAT_CCS()
is one of them. In the interest of simplicity, add a reversed
HAS_AUX_CCS() feature check macro, as that's we mostly use it for in
display.
v2: include adl-p (Ville)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20251013144552.1710851-1-jani.nikula@intel.com
We should try to get rid of checks that depend on struct
drm_i915_private (or struct xe_device) in display
code. HAS_128_BYTE_Y_TILING() is one of them. In the interest of
simplicity, just duplicate the check as HAS_128B_Y_TILING() in display.
v2: gen2 also has 128-byte Y-tile
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/2a7877f8f1d11114c1a17869bd24d83e13b1fac2.1760094361.git.jani.nikula@intel.com
Gen 2 platforms actually have 128-byte Y-tile, it's just different from
the 128-byte Y-tile on i945+. Make the HAS_128_BYTE_Y_TILING() feature
check macro and its usage slightly less convoluted by including gen 2 in
it.
i915_tiling_ok() would strictly not need changing, but separate the if
clauses to emphasize gen 2 X-tile also being 128 bytes.
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/41bf9d67a11f38f4ab0f82740f38d5c8fe0bb58b.1760094361.git.jani.nikula@intel.com
On SoCs, like the SAM9X75, which embed the XLCDC ip, the registers that
configure the unified scaling engine were not filled with proper values.
Indeed, for YCbCr formats, the VXSCFACT bitfield of the HEOCFG25
register and the HXSCFACT bitfield of the HEOCFG27 register were
incorrect.
For 4:2:0 formats, both vertical and horizontal factors for
chroma chanels should be divided by 2 from the factors for the luma
channel. Hence:
HEOCFG24.VXSYFACT = VFACTOR
HEOCFG25.VSXCFACT = VFACTOR / 2
HEOCFG26.HXSYFACT = HFACTOR
HEOCFG27.HXSCFACT = HFACTOR / 2
However, for 4:2:2 formats, only the horizontal factor for chroma
chanels should be divided by 2 from the factor for the luma channel;
the vertical factor is the same for all the luma and chroma channels.
Hence:
HEOCFG24.VXSYFACT = VFACTOR
HEOCFG25.VXSCFACT = VFACTOR
HEOCFG26.HXSYFACT = HFACTOR
HEOCFG27.HXSCFACT = HFACTOR / 2
Fixes: d498771b0b ("drm: atmel_hlcdc: Add support for XLCDC using IP specific driver ops")
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@microchip.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20241014094942.325211-1-manikandan.m@microchip.com
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
The original implementation used level detection for the first interrupt
after device reset to avoid potential interrupt line noise and missed
interrupts during the initialization phase. However, this approach
introduced unintended side effects when tested with certain touch panels,
including:
- Delayed hardware interrupt response
- Multiple spurious interrupt triggers
Switching back to edge detection for the first interrupt resolves these
issues while maintaining reliable interrupt handling.
Extensive testing across multiple platforms with touch panels from
various vendors confirms this change introduces no regressions.
[jkosina@suse.com: properly capitalize shortlog]
Fixes: 9d8d51735a ("HID: intel-thc-hid: intel-quickspi: Add HIDSPI protocol implementation")
Tested-by: Rui Zhang <rui1.zhang@intel.com>
Signed-off-by: Even Xu <even.xu@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The type definition of qcdev->i2c_max_frame_size is already
u32, so remove the unnecessary type casting le16_to_cpu.
Signed-off-by: Xinpeng Sun <xinpeng.sun@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202509280841.pxmgBzKW-lkp@intel.com/
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Add support for Orion2 throttle configurations with more than 32 buttons
on the grip handle (this means the device reports more than 80 buttons).
Map additional button codes to KEY_MACRO1 .. KEY_MACRO28.
Make the module simpler, removing report descriptor fixup.
[jkosina@suse.com: fix changelog]
Signed-off-by: Ivan Gorinov <linux-kernel@altimeter.info>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The Logitech G13 is a gaming keypad with general-purpose macro keys,
four LED-backlit macro preset keys, five "menu" keys, backlight toggle
key, an analog thumbstick, RGB LED backlight, and a monochrome LCD
display.
Support input event generation for all keys and the thumbstick, and
expose all LEDs.
Signed-off-by: Leo L. Schwab <ewhac@ewhac.org>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Tested-by: Kate Hsuan <hpa@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
update the LCDC_ATTRE register in drm plane atomic_disable to handle
the configuration changes of each layer when a plane is disabled.
Reviewed-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20241014064644.292943-1-manikandan.m@microchip.com
Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com>
Add entries detailing the clocks and resets for the ISP in the
RZ/V2H(P) SoC.
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20251010-rzv2h_isp_clk-v2-1-2c8853a9af7c@ideasonboard.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The use of IS_ERR_OR_NULL() suggests that "clk" can be a NULL pointer.
Hence smatch assumes so, and issues a "passing zero to 'PTR_ERR'"
warning.
At these checkpoints, "clk" always contains either a valid pointer, or
an error pointer (none of the functions called return NULL pointers).
Hence replace IS_ERR_OR_NULL() by IS_ERR().
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202408032025.ve2JMaoV-lkp@intel.com/
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/81260328acb5c78e915ab04afad3901a31c16128.1758793709.git.geert+renesas@glider.be
alt_replace_call() will never return a negative value, so testing the
return value to be less than zero can be dropped.
This makes it possible to switch the return type of alt_replace_call()
and the type of insn_buff_sz to unsigned int.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Some file systems like FUSE-based ones or overlayfs may record the backing
file in struct vm_area_struct vm_file, instead of the user file that the
user mmapped.
That causes perf to misreport the device major/minor numbers of the file
system of the file, and the generation of the file, and potentially other
inode details. There is an existing helper file_user_inode() for that
situation.
Use file_user_inode() instead of file_inode() to get the inode for MMAP2
events.
Example:
Setup:
# cd /root
# mkdir test ; cd test ; mkdir lower upper work merged
# cp `which cat` lower
# mount -t overlay overlay -olowerdir=lower,upperdir=upper,workdir=work merged
# perf record -e cycles:u -- /root/test/merged/cat /proc/self/maps
...
55b2c91d0000-55b2c926b000 r-xp 00018000 00:1a 3419 /root/test/merged/cat
...
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.004 MB perf.data (5 samples) ]
#
# stat /root/test/merged/cat
File: /root/test/merged/cat
Size: 1127792 Blocks: 2208 IO Block: 4096 regular file
Device: 0,26 Inode: 3419 Links: 1
Access: (0755/-rwxr-xr-x) Uid: ( 0/ root) Gid: ( 0/ root)
Access: 2025-09-08 12:23:59.453309624 +0000
Modify: 2025-09-08 12:23:59.454309624 +0000
Change: 2025-09-08 12:23:59.454309624 +0000
Birth: 2025-09-08 12:23:59.453309624 +0000
Before:
Device reported 00:02 differs from stat output and /proc/self/maps
# perf script --show-mmap-events | grep /root/test/merged/cat
cat 377 [-01] 243.078558: PERF_RECORD_MMAP2 377/377: [0x55b2c91d0000(0x9b000) @ 0x18000 00:02 3419 2068525940]: r-xp /root/test/merged/cat
After:
Device reported 00:1a is the same as stat output and /proc/self/maps
# perf script --show-mmap-events | grep /root/test/merged/cat
cat 362 [-01] 127.755167: PERF_RECORD_MMAP2 362/362: [0x55ba6e781000(0x9b000) @ 0x18000 00:1a 3419 0]: r-xp /root/test/merged/cat
With respect to stable kernels, overlayfs mmap function ovl_mmap() was
added in v4.19 but file_user_inode() was not added until v6.8 and never
back-ported to stable kernels. FMODE_BACKING that it depends on was added
in v6.5. This issue has gone largely unnoticed, so back-porting before
v6.8 is probably not worth it, so put 6.8 as the stable kernel prerequisite
version, although in practice the next long term kernel is 6.12.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Amir Goldstein <amir73il@gmail.com>
Cc: stable@vger.kernel.org # 6.8
Some file systems like FUSE-based ones or overlayfs may record the backing
file in struct vm_area_struct vm_file, instead of the user file that the
user mmapped.
Since commit def3ae83da ("fs: store real path instead of fake path in
backing file f_path"), file_path() no longer returns the user file path
when applied to a backing file. There is an existing helper
file_user_path() for that situation.
Use file_user_path() instead of file_path() to get the path for MMAP
and MMAP2 events.
Example:
Setup:
# cd /root
# mkdir test ; cd test ; mkdir lower upper work merged
# cp `which cat` lower
# mount -t overlay overlay -olowerdir=lower,upperdir=upper,workdir=work merged
# perf record -e intel_pt//u -- /root/test/merged/cat /proc/self/maps
...
55b0ba399000-55b0ba434000 r-xp 00018000 00:1a 3419 /root/test/merged/cat
...
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.060 MB perf.data ]
#
Before:
File name is wrong (/cat), so decoding fails:
# perf script --no-itrace --show-mmap-events
cat 367 [016] 100.491492: PERF_RECORD_MMAP2 367/367: [0x55b0ba399000(0x9b000) @ 0x18000 00:02 3419 489959280]: r-xp /cat
...
# perf script --itrace=e | wc -l
Warning:
19 instruction trace errors
19
#
After:
File name is correct (/root/test/merged/cat), so decoding is ok:
# perf script --no-itrace --show-mmap-events
cat 364 [016] 72.153006: PERF_RECORD_MMAP2 364/364: [0x55ce4003d000(0x9b000) @ 0x18000 00:02 3419 3132534314]: r-xp /root/test/merged/cat
# perf script --itrace=e
# perf script --itrace=e | wc -l
0
#
Fixes: def3ae83da ("fs: store real path instead of fake path in backing file f_path")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Amir Goldstein <amir73il@gmail.com>
Cc: stable@vger.kernel.org
It was reported that Intel PT address filters do not work in Docker
containers. That relates to the use of overlayfs.
overlayfs records the backing file in struct vm_area_struct vm_file,
instead of the user file that the user mmapped. In order for an address
filter to match, it must compare to the user file inode. There is an
existing helper file_user_inode() for that situation.
Use file_user_inode() instead of file_inode() to get the inode for address
filter matching.
Example:
Setup:
# cd /root
# mkdir test ; cd test ; mkdir lower upper work merged
# cp `which cat` lower
# mount -t overlay overlay -olowerdir=lower,upperdir=upper,workdir=work merged
# perf record --buildid-mmap -e intel_pt//u --filter 'filter * @ /root/test/merged/cat' -- /root/test/merged/cat /proc/self/maps
...
55d61d246000-55d61d2e1000 r-xp 00018000 00:1a 3418 /root/test/merged/cat
...
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.015 MB perf.data ]
# perf buildid-cache --add /root/test/merged/cat
Before:
Address filter does not match so there are no control flow packets
# perf script --itrace=e
# perf script --itrace=b | wc -l
0
# perf script -D | grep 'TIP.PGE' | wc -l
0
#
After:
Address filter does match so there are control flow packets
# perf script --itrace=e
# perf script --itrace=b | wc -l
235
# perf script -D | grep 'TIP.PGE' | wc -l
57
#
With respect to stable kernels, overlayfs mmap function ovl_mmap() was
added in v4.19 but file_user_inode() was not added until v6.8 and never
back-ported to stable kernels. FMODE_BACKING that it depends on was added
in v6.5. This issue has gone largely unnoticed, so back-porting before
v6.8 is probably not worth it, so put 6.8 as the stable kernel prerequisite
version, although in practice the next long term kernel is 6.12.
Closes: https://lore.kernel.org/linux-perf-users/aBCwoq7w8ohBRQCh@fremen.lan
Reported-by: Edd Barrett <edd@theunixzoo.co.uk>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Amir Goldstein <amir73il@gmail.com>
Cc: stable@vger.kernel.org # 6.8
It's less confusing to optimize uprobe right after handlers execution
and before we do the check for changed ip register to avoid situations
where changed ip register would skip uprobe optimization.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Renesas RZ/T2H (R9A09G077) and RZ/N2H (R9A09G087) SoCs have three 12-bit
ADC peripherals, each with their own peripheral clock.
For conversion, they use the PCLKL clock.
Add their clocks to the list of module clocks.
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250923160524.1096720-2-cosmin-gabriel.tanislav.xa@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
On R-Car V4H, the PCIEC controller DBI read would generate an SError in
case the controller reset is released by writing SRSTCLR register first,
and immediately afterward reading some PCIEC controller DBI register.
The issue triggers in rcar_gen4_pcie_additional_common_init() on
dw_pcie_readl_dbi(dw, PCIE_PORT_LANE_SKEW), which on V4H is the first
read after reset_control_deassert(dw->core_rsts[DW_PCIE_PWR_RST].rstc).
The reset controller which contains the SRSTCLR register and the PCIEC
controller which contains the DBI register share the same root access
bus, but the bus then splits into separate segments before reaching each
IP. Even if the SRSTCLR write access was posted on the bus before the
DBI read access, it seems the DBI read access may reach the PCIEC
controller before the SRSTCLR write completed, and trigger the SError.
Mitigate the issue by adding a dummy SRSTCLR read, which assures the
SRSTCLR write completes fully and is latched into the reset controller,
before the PCIEC DBI read access can occur.
Fixes: 0ab55cf183 ("clk: renesas: cpg-mssr: Add support for R-Car V4H")
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250922162113.113223-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
R-Car V4H Reference Manual R19UH0186EJ0130 Rev.1.30 Apr. 21, 2025 page
583 Figure 9.3.1(a) Software Reset flow (A) as well as flow (B) / (C)
indicate after reset has been asserted by writing a matching reset bit
into register SRCR, it is mandatory to wait 1ms.
This 1ms delay is documented on R-Car V4H and V4M, it is currently
unclear whether S4 is affected as well. This patch does apply the extra
delay on R-Car S4 as well.
Fix the reset driver to respect the additional delay when toggling
resets. Drivers which use separate reset_control_(de)assert() must
assure matching delay in their driver code.
Fixes: 0ab55cf183 ("clk: renesas: cpg-mssr: Add support for R-Car V4H")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250918030552.331389-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Semicolons after end of function braces are unnecessary, remove them.
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250923174951.1136259-1-cosmin-gabriel.tanislav.xa@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
