[ Upstream commit 47e35366bc ]
xfstests generic/730 test failed because after deleting the device
that still had dirty data, the file could still be read without
returning an error. The reason is the missing shutdown check in
->read_iter.
I also noticed that shutdown checks were missing from ->write_iter,
->splice_read, and ->mmap. This commit adds shutdown checks to all
of them.
Fixes: f761fcdd28 ("exfat: Implement sops->shutdown and ioctl")
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b0522303f6 ]
In exfat_find_last_cluster(), the cluster chain is traversed until
the EOF cluster. If the cluster chain includes a loop due to file
system corruption, the EOF cluster cannot be traversed, resulting
in an infinite loop.
If the number of clusters indicated by the file size is inconsistent
with the cluster chain length, exfat_find_last_cluster() will return
an error, so if this inconsistency is found, the traversal can be
aborted without traversing to the EOF cluster.
Reported-by: syzbot+f7d147e6db52b1e09dba@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=f7d147e6db52b1e09dba
Tested-by: syzbot+f7d147e6db52b1e09dba@syzkaller.appspotmail.com
Fixes: 31023864e6 ("exfat: add fat entry operations")
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e7f1644f2 ]
Commit ef7134c7fc ("smb: client: Fix use-after-free of network
namespace.") attempted to fix a netns use-after-free issue by manually
adjusting reference counts via sk->sk_net_refcnt and sock_inuse_add().
However, a later commit e9f2517a3e ("smb: client: fix TCP timers deadlock
after rmmod") pointed out that the approach of manually setting
sk->sk_net_refcnt in the first commit was technically incorrect, as
sk->sk_net_refcnt should only be set for user sockets. It led to issues
like TCP timers not being cleared properly on close. The second commit
moved to a model of just holding an extra netns reference for
server->ssocket using get_net(), and dropping it when the server is torn
down.
But there remain some gaps in the get_net()/put_net() balancing added by
these commits. The incomplete reference handling in these fixes results
in two issues:
1. Netns refcount leaks[1]
The problem process is as follows:
```
mount.cifs cifsd
cifs_do_mount
cifs_mount
cifs_mount_get_session
cifs_get_tcp_session
get_net() /* First get net. */
ip_connect
generic_ip_connect /* Try port 445 */
get_net()
->connect() /* Failed */
put_net()
generic_ip_connect /* Try port 139 */
get_net() /* Missing matching put_net() for this get_net().*/
cifs_get_smb_ses
cifs_negotiate_protocol
smb2_negotiate
SMB2_negotiate
cifs_send_recv
wait_for_response
cifs_demultiplex_thread
cifs_read_from_socket
cifs_readv_from_socket
cifs_reconnect
cifs_abort_connection
sock_release();
server->ssocket = NULL;
/* Missing put_net() here. */
generic_ip_connect
get_net()
->connect() /* Failed */
put_net()
sock_release();
server->ssocket = NULL;
free_rsp_buf
...
clean_demultiplex_info
/* It's only called once here. */
put_net()
```
When cifs_reconnect() is triggered, the server->ssocket is released
without a corresponding put_net() for the reference acquired in
generic_ip_connect() before. it ends up calling generic_ip_connect()
again to retry get_net(). After that, server->ssocket is set to NULL
in the error path of generic_ip_connect(), and the net count cannot be
released in the final clean_demultiplex_info() function.
2. Potential use-after-free
The current refcounting scheme can lead to a potential use-after-free issue
in the following scenario:
```
cifs_do_mount
cifs_mount
cifs_mount_get_session
cifs_get_tcp_session
get_net() /* First get net */
ip_connect
generic_ip_connect
get_net()
bind_socket
kernel_bind /* failed */
put_net()
/* after out_err_crypto_release label */
put_net()
/* after out_err label */
put_net()
```
In the exception handling process where binding the socket fails, the
get_net() and put_net() calls are unbalanced, which may cause the
server->net reference count to drop to zero and be prematurely released.
To address both issues, this patch ties the netns reference counting to
the server->ssocket and server lifecycles. The extra reference is now
acquired when the server or socket is created, and released when the
socket is destroyed or the server is torn down.
[1]: https://bugzilla.kernel.org/show_bug.cgi?id=219792
Fixes: ef7134c7fc ("smb: client: Fix use-after-free of network namespace.")
Fixes: e9f2517a3e ("smb: client: fix TCP timers deadlock after rmmod")
Signed-off-by: Wang Zhaolong <wangzhaolong1@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d3e998a0b ]
The nfs_client manages state for all the superblocks in the
"cl_superblocks" list, so it must not be shut down until all of them are
gone.
Fixes: 7d3e26a054 ("NFS: Cancel all existing RPC tasks when shutdown")
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e63d465f59 ]
If dib8000_set_dds()'s call to dib8000_read32() returns zero, the result
is a divide-by-zero. Prevent that from happening.
Fixes the following warning with an UBSAN kernel:
drivers/media/dvb-frontends/dib8000.o: warning: objtool: dib8000_tune() falls through to next function dib8096p_cfg_DibRx()
Fixes: 173a64cb3f ("[media] dib8000: enhancement")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/bd1d504d930ae3f073b1e071bcf62cae7708773c.1742852847.git.jpoimboe@kernel.org
Closes: https://lore.kernel.org/r/202503210602.fvH5DO1i-lkp@intel.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e6ec8cf64 ]
The struct thermal_zone_device is already declared on line 32, so the
duplicate declaration has been removed.
Fixes: b1ae92dcfa ("thermal: core: Make struct thermal_zone_device definition internal")
Signed-off-by: xueqin Luo <luoxueqin@kylinos.cn>
Link: https://lore.kernel.org/r/20250206081436.51785-1-luoxueqin@kylinos.cn
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 35d13f841a ]
The previous change to support cgroup filters introduced a bug that
pathname can include commas. It confused the lexer to treat an item and
the trailing comma as a single token. And it resulted in a parse error:
$ sudo perf record -e cycles:P --filter 'period > 0, ip > 64' -- true
perf_bpf_filter: Error: Unexpected item: 0,
perf_bpf_filter: syntax error, unexpected BFT_ERROR, expecting BFT_NUM
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
--filter <filter>
event filter
It should get "0" and "," separately.
An easiest fix would be to remove "," from the possible pathname
characters. As it's for cgroup names, probably ok to assume it won't
have commas in the pathname.
I found that the existing BPF filtering test didn't have any complex
filter condition with commas. Let's update the group filter test which
is supposed to test filter combinations like this.
Link: https://lore.kernel.org/r/20250307220922.434319-1-namhyung@kernel.org
Fixes: 91e88437d5 ("perf bpf-filter: Support filtering on cgroups")
Reported-by: Sally Shi <sshii@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a352a90e8 ]
Annotate so it is built with non-executable stack.
Fixes: 8b97519711 ("perf test: Add asm pureloop test tool")
Signed-off-by: Marcus Meissner <meissner@suse.de>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Link: https://lore.kernel.org/r/20250323085410.23751-1-meissner@suse.de
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6287fbad1c ]
proc_pid_wchan() used to report kernel addresses to user space but that is
no longer the case today. Bring the comment above proc_pid_wchan() in
sync with the implementation.
Link: https://lkml.kernel.org/r/20250319210222.1518771-1-bvanassche@acm.org
Fixes: b2f73922d1 ("fs/proc, core/debug: Don't expose absolute kernel addresses via wchan")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 182f12f319 ]
frontend_bound metrics was miscalculated due to different scaling in
a couple of metrics it depends on. Change the scaling to match with
AmpereOne.
Fixes: 16438b652b ("perf vendor events arm64 AmpereOneX: Add core PMU events and metrics")
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250313201559.11332-3-ilkka@os.amperecomputing.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d97aa06667 ]
tty_write_room() returns an "unsigned int". So in case some insane
driver (like my tty test driver) returns (legitimate) UINT_MAX from its
tty_operations::write_room(), n_tty is confused on several places.
For example, in process_output_block(), the result of tty_write_room()
is stored into (signed) "int". So this UINT_MAX suddenly becomes -1. And
that is extended to ssize_t and returned from process_output_block().
This causes a write() to such a node to receive -EPERM (which is -1).
Fix that by using proper "unsigned int" and proper "== 0" test. And
return 0 constant directly in that "if", so that it is immediately clear
what is returned ("space" equals to 0 at that point).
Similarly for process_output() and __process_echoes().
Note this does not fix any in-tree driver as of now.
If you want "Fixes: something", it would be commit 03b3b1a240 ("tty:
make tty_operations::write_room return uint"). I intentionally do not
mark this patch by a real tag below.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250317070046.24386-6-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3db89bc6d9 ]
In case vchiq_platform_conn_state_changed() is never called or fails before
driver removal, ka_thread won't be a valid pointer to a task_struct. So
do the necessary checks before calling kthread_stop to avoid a crash.
Fixes: 863a756aaf ("staging: vc04_services: vchiq_core: Stop kthreads on vchiq module unload")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20250309125014.37166-3-wahrenst@gmx.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d2dcd6352 ]
zfree() requires an address otherwise it frees what's in name, rather
than name itself. Pass the address of name to fix it.
This was the only incorrect occurrence in Perf found using a search.
Fixes: 8db5cabcf1 ("perf stat: Fork and launch 'perf record' when 'perf stat' needs to get retire latency value for a metric.")
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20250319101614.190922-1-james.clark@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ebf0b33273 ]
Kernel modules for which we cannot find a file on-disk will have a
dso->long_name that looks like "[module_name]". Prior to the commit
listed in the fixes, the dso->kernel field would be zero (for user
space), so dso__is_kallsyms() would return false. After the commit,
kernel module DSOs are correctly labeled, but the result is that
dso__is_kallsyms() erroneously returns true for those modules without a
filesystem path.
Later, build_id_cache__add() consults this value of is_kallsyms, and
when true, it copies /proc/kallsyms into the cache. Users with many
kernel modules without a filesystem path (e.g. ksplice or possibly
kernel live patch modules) have reported excessive disk space usage in
the build ID cache directory due to this behavior.
To reproduce the issue, it's enough to build a trivial out-of-tree hello
world kernel module, load it using insmod, and then use:
perf record -ag -- sleep 1
In the build ID directory, there will be a directory for your module
name containing a kallsyms file.
Fix this up by changing dso__is_kallsyms() to consult the
dso_binary_type enumeration, which is also symmetric to the above checks
for dso__is_vmlinux() and dso__is_kcore(). With this change, kallsyms is
not cached in the build-id cache for out-of-tree modules.
Fixes: 02213cec64 ("perf maps: Mark module DSOs with kernel type")
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Link: https://lore.kernel.org/r/20250318230012.2038790-1-stephen.s.brennan@oracle.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 89aaeaf842 ]
The pyrf_event__new() method copies the event obtained from the perf
ring buffer to a structure that will then be turned into a python object
for further consumption, so it copies perf_event.header.size bytes to
its 'event' member:
$ pahole -C pyrf_event /tmp/build/perf-tools-next/python/perf.cpython-312-x86_64-linux-gnu.so
struct pyrf_event {
PyObject ob_base; /* 0 16 */
struct evsel * evsel; /* 16 8 */
struct perf_sample sample; /* 24 312 */
/* XXX last struct has 7 bytes of padding, 2 holes */
/* --- cacheline 5 boundary (320 bytes) was 16 bytes ago --- */
union perf_event event; /* 336 4168 */
/* size: 4504, cachelines: 71, members: 4 */
/* member types with holes: 1, total: 2 */
/* paddings: 1, sum paddings: 7 */
/* last cacheline: 24 bytes */
};
$
It was doing so without checking if the event just obtained has more
than that space, fix it.
This isn't a proper, final solution, as we need to support larger
events, but for the time being we at least bounds check and document it.
Fixes: 877108e42b ("perf tools: Initial python binding")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250312203141.285263-7-acme@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f3fed3ae34 ]
When processing tracepoints the perf python binding was parsing the
event before calling perf_mmap__consume(&md->core) in
pyrf_evlist__read_on_cpu().
But part of this event parsing was to set the perf_sample->raw_data
pointer to the payload of the event, which then could be overwritten by
other event before tracepoint fields were asked for via event.prev_comm
in a python program, for instance.
This also happened with other fields, but strings were were problems
were surfacing, as there is UTF-8 validation for the potentially garbled
data.
This ended up showing up as (with some added debugging messages):
( field 'prev_comm' ret=0x7f7c31f65110, raw_size=68 ) ( field 'prev_pid' ret=0x7f7c23b1bed0, raw_size=68 ) ( field 'prev_prio' ret=0x7f7c239c0030, raw_size=68 ) ( field 'prev_state' ret=0x7f7c239c0250, raw_size=68 ) time 14771421785867 prev_comm= prev_pid=1919907691 prev_prio=796026219 prev_state=0x303a32313175 ==>
( XXX '��' len=16, raw_size=68) ( field 'next_comm' ret=(nil), raw_size=68 ) Traceback (most recent call last):
File "/home/acme/git/perf-tools-next/tools/perf/python/tracepoint.py", line 51, in <module>
main()
File "/home/acme/git/perf-tools-next/tools/perf/python/tracepoint.py", line 46, in main
event.next_comm,
^^^^^^^^^^^^^^^
AttributeError: 'perf.sample_event' object has no attribute 'next_comm'
When event.next_comm was asked for, the PyUnicode_FromString() python
API would fail and that tracepoint field wouldn't be available, stopping
the tools/perf/python/tracepoint.py test tool.
But, since we already do a copy of the whole event in pyrf_event__new,
just use it and while at it remove what was done in in e8968e6541
("perf python: Fix pyrf_evlist__read_on_cpu event consuming") because we
don't really need to wait for parsing the sample before declaring the
event as consumed.
This copy is questionable as is now, as it limits the maximum event +
sample_type and tracepoint payload to sizeof(union perf_event), this all
has been "working" because 'struct perf_event_mmap2', the largest entry
in 'union perf_event' is:
$ pahole -C perf_event ~/bin/perf | grep mmap2
struct perf_record_mmap2 mmap2; /* 0 4168 */
$
Fixes: bae57e3825 ("perf python: Add support to resolve tracepoint fields")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250312203141.285263-6-acme@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3de5a2bf5b ]
To avoid a leak if we have the python object but then something happens
and we need to return the operation, decrement the offset of the newly
created object.
Fixes: 377f698db1 ("perf python: Add struct evsel into struct pyrf_event")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250312203141.285263-5-acme@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1376c195e8 ]
Some old cut'n'paste error, its "ip", so the description should be
"event ip", not "event type".
Fixes: 877108e42b ("perf tools: Initial python binding")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250312203141.285263-2-acme@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9cecad134d ]
The code does not add IBI rules for devices with controller capability.
However, the secondary controller has the controller capability and works
at target mode when the device is probed. Therefore, add IBI rules for
such devices.
Fixes: dd3c52846d ("i3c: master: svc: Add Silvaco I3C master driver")
Signed-off-by: Stanley Chu <yschu@nuvoton.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250318053606.3087121-2-yschu@nuvoton.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0bc754d1e3 ]
Some file systems (e.g. ext4) may reuse inode numbers once the inode is
not in use anymore. Usually hostfs will keep an FD open for each inode,
but this is not always the case. In the case of sockets, this cannot
even be done properly.
As such, the following sequence of events was possible:
* application creates and deletes a socket
* hostfs creates/deletes the socket on the host
* inode is still in the hostfs cache
* hostfs creates a new file
* ext4 on the outside reuses the inode number
* hostfs finds the socket inode for the newly created file
* application receives -ENXIO when opening the file
As mentioned, this can only happen if the deleted file is a special file
that is never opened on the host (i.e. no .open fop).
As such, to prevent issues, it is sufficient to check that the inode
has the expected type. That said, also add a check for the inode birth
time, just to be on the safe side.
Fixes: 74ce793bcb ("hostfs: Fix ephemeral inodes")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Mickaël Salaün <mic@digikod.net>
Tested-by: Mickaël Salaün <mic@digikod.net>
Link: https://patch.msgid.link/20250214092822.1241575-1-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 84a6fc3784 ]
There is no need to override the default version of this function
anymore as UML now has proper _nofault memory access functions.
Doing this also fixes the fact that the implementation was incorrect as
using mincore() will incorrectly flag pages as inaccessible if they were
swapped out by the host.
Fixes: f75b1b1bed ("um: Implement probe_kernel_read()")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20250210160926.420133-3-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5550187c4c ]
In order to work around some issues with disabling SSE on older versions
of gcc (compilation would fail upon seeing a function declaration
containing a float, even if it was never called or defined), the
corresponding CFLAGS and RUSTFLAGS were only set when using clang.
However, this led to two problems:
- Newer gcc versions also wouldn't get the correct flags, despite not
having the bug.
- The RUSTFLAGS for setting the rust target definition were not set,
despite being unrelated. This works by chance for x86_64, as the
built-in default target is close enough, but not for 32-bit x86.
Move the target definition outside the conditional block, and update the
condition to take into account the gcc version.
Fixes: a3046a618a ("um: Only disable SSE on clang to work around old GCC bugs")
Signed-off-by: David Gow <davidgow@google.com>
Link: https://patch.msgid.link/20250210105353.2238769-2-davidgow@google.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7851bf649d ]
Patch series "fs/dax: Fix ZONE_DEVICE page reference counts", v9.
Device and FS DAX pages have always maintained their own page reference
counts without following the normal rules for page reference counting. In
particular pages are considered free when the refcount hits one rather
than zero and refcounts are not added when mapping the page.
Tracking this requires special PTE bits (PTE_DEVMAP) and a secondary
mechanism for allowing GUP to hold references on the page (see
get_dev_pagemap). However there doesn't seem to be any reason why FS DAX
pages need their own reference counting scheme.
By treating the refcounts on these pages the same way as normal pages we
can remove a lot of special checks. In particular pXd_trans_huge()
becomes the same as pXd_leaf(), although I haven't made that change here.
It also frees up a valuable SW define PTE bit on architectures that have
devmap PTE bits defined.
It also almost certainly allows further clean-up of the devmap managed
functions, but I have left that as a future improvment. It also enables
support for compound ZONE_DEVICE pages which is one of my primary
motivators for doing this work.
This patch (of 20):
FS DAX requires file systems to call into the DAX layout prior to
unlinking inodes to ensure there is no ongoing DMA or other remote access
to the direct mapped page. The fuse file system implements
fuse_dax_break_layouts() to do this which includes a comment indicating
that passing dmap_end == 0 leads to unmapping of the whole file.
However this is not true - passing dmap_end == 0 will not unmap anything
before dmap_start, and further more dax_layout_busy_page_range() will not
scan any of the range to see if there maybe ongoing DMA access to the
range. Fix this by passing -1 for dmap_end to fuse_dax_break_layouts()
which will invalidate the entire file range to
dax_layout_busy_page_range().
Link: https://lkml.kernel.org/r/cover.8068ad144a7eea4a813670301f4d2a86a8e68ec4.1740713401.git-series.apopple@nvidia.com
Link: https://lkml.kernel.org/r/f09a34b6c40032022e4ddee6fadb7cc676f08867.1740713401.git-series.apopple@nvidia.com
Fixes: 6ae330cad6 ("virtiofs: serialize truncate/punch_hole and dax fault path")
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Co-developed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Balbir Singh <balbirs@nvidia.com>
Tested-by: Alison Schofield <alison.schofield@intel.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Asahi Lina <lina@asahilina.net>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chunyan Zhang <zhang.lyra@gmail.com>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: linmiaohe <linmiaohe@huawei.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: Michael "Camp Drill Sergeant" Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Ted Ts'o <tytso@mit.edu>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 43502f6e8d ]
A recent change increased the size of an NFSv4 open owner, but didn't
increase the corresponding max_sz defines. This is not know to have
caused failure, but should be fixed.
This patch also fixes some relates _maxsz fields that are wrong.
Note that the XXX_owner_id_maxsz values now are only the size of the id
and do NOT include the len field that will always preceed the id in xdr
encoding. I think this is clearer.
Reported-by: David Disseldorp <ddiss@suse.com>
Fixes: d98f722725 ("nfs: simplify and guarantee owner uniqueness.")
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e767b59e29 ]
The amount of looping through the list of delegations is occasionally
leading to soft lockups. If the state manager was asked to manage the
delayed return of delegations, then only scan those filesystems
containing delegations that were marked as being delayed.
Fixes: be20037725 ("NFSv4: Fix delegation return in cases where we have to retry")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f163aa81a7 ]
The amount of looping through the list of delegations is occasionally
leading to soft lockups. If the state manager was asked to reap the
expired delegations, it should scan only those filesystems that hold
delegations that need to be reaped.
Fixes: 7f156ef0bf ("NFSv4: Clean up nfs_delegation_reap_expired()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 35a566a24e ]
The amount of looping through the list of delegations is occasionally
leading to soft lockups. If the state manager was asked to return
delegations asynchronously, it should only scan those filesystems that
hold delegations that need to be returned.
Fixes: af3b61bf61 ("NFSv4: Clean up nfs_client_return_marked_delegations()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47acca884f ]
The amount of looping through the list of delegations is occasionally
leading to soft lockups. Avoid at least some loops by not requiring the
NFSv4 state manager to scan for delegations that are marked for
return-on-close. Instead, either mark them for immediate return (if
possible) or else leave it up to nfs4_inode_return_delegation_on_close()
to return them once the file is closed by the application.
Fixes: b757144fd7 ("NFSv4: Be less aggressive about returning delegations for open files")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a406aff8c0 ]
The l_tree_depth field is 16-bit (__le16), but the actual maximum depth is
limited to OCFS2_MAX_PATH_DEPTH.
Add a check to prevent out-of-bounds access if l_tree_depth has an invalid
value, which may occur when reading from a corrupted mounted disk [1].
Link: https://lkml.kernel.org/r/20250214084908.736528-1-kovalev@altlinux.org
Fixes: ccd979bdbc ("[PATCH] OCFS2: The Second Oracle Cluster Filesystem")
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Reported-by: syzbot+66c146268dc88f4341fd@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=66c146268dc88f4341fd [1]
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Kurt Hackel <kurt.hackel@oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Vasiliy Kovalev <kovalev@altlinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9986fb5164 ]
Patch series "powerpc/crash: use generic crashkernel reservation", v3.
Commit 0ab97169aa ("crash_core: add generic function to do reservation")
added a generic function to reserve crashkernel memory. So let's use the
same function on powerpc and remove the architecture-specific code that
essentially does the same thing.
The generic crashkernel reservation also provides a way to split the
crashkernel reservation into high and low memory reservations, which can
be enabled for powerpc in the future.
Additionally move powerpc to use generic APIs to locate memory hole for
kexec segments while loading kdump kernel.
This patch (of 7):
kexec_elf_load() loads an ELF executable and sets the address of the
lowest PT_LOAD section to the address held by the lowest_load_addr
function argument.
To determine the lowest PT_LOAD address, a local variable lowest_addr
(type unsigned long) is initialized to UINT_MAX. After loading each
PT_LOAD, its address is compared to lowest_addr. If a loaded PT_LOAD
address is lower, lowest_addr is updated. However, setting lowest_addr to
UINT_MAX won't work when the kernel image is loaded above 4G, as the
returned lowest PT_LOAD address would be invalid. This is resolved by
initializing lowest_addr to ULONG_MAX instead.
This issue was discovered while implementing crashkernel high/low
reservation on the PowerPC architecture.
Link: https://lkml.kernel.org/r/20250131113830.925179-1-sourabhjain@linux.ibm.com
Link: https://lkml.kernel.org/r/20250131113830.925179-2-sourabhjain@linux.ibm.com
Fixes: a0458284f0 ("powerpc: Add support code for kexec_file_load()")
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 096cbb80ab ]
Ever since commit b756a3b5e7 ("mm: device exclusive memory access") we
can return with a device-exclusive entry from page_vma_mapped_walk().
__replace_page() is not prepared for that, so teach it about these PFN
swap PTEs. Note that device-private entries are so far not applicable on
that path, because GUP would never have returned such folios (conversion
to device-private happens by page migration, not in-place conversion of
the PTE).
There is a race between GUP and us locking the folio to look it up using
page_vma_mapped_walk(), so this is likely a fix (unless something else
could prevent that race, but it doesn't look like). pte_pfn() on
something that is not a present pte could give use garbage, and we'd
wrongly mess up the mapcount because it was already adjusted by calling
folio_remove_rmap_pte() when making the entry device-exclusive.
Link: https://lkml.kernel.org/r/20250210193801.781278-9-david@redhat.com
Fixes: b756a3b5e7 ("mm: device exclusive memory access")
Signed-off-by: David Hildenbrand <david@redhat.com>
Tested-by: Alistair Popple <apopple@nvidia.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Lyude <lyude@redhat.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: SeongJae Park <sj@kernel.org>
Cc: Simona Vetter <simona.vetter@ffwll.ch>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yanteng Si <si.yanteng@linux.dev>
Cc: Barry Song <v-songbaohua@oppo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf67629f7f ]
No need to specify the array size, let the compiler figure that out.
This addresses this compiler warning that was noticed while build
testing on fedora rawhide:
31 15.81 fedora:rawhide : FAIL gcc version 15.0.1 20250225 (Red Hat 15.0.1-0) (GCC)
util/units.c: In function 'unit_number__scnprintf':
util/units.c:67:24: error: initializer-string for array of 'char' is too long [-Werror=unterminated-string-initialization]
67 | char unit[4] = "BKMG";
| ^~~~~~
cc1: all warnings being treated as errors
Fixes: 9808143ba2 ("perf tools: Add unit_number__scnprintf function")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20250310194534.265487-3-acme@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe0ce8a9d8 ]
Over various refactorings evlist__create_syswide_maps has been made to
only ever return with -ENOMEM. Fix this so that when
perf_evlist__set_maps is successfully called, 0 is returned.
Reviewed-by: Howard Chu <howardchu95@gmail.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20250228222308.626803-3-irogers@google.com
Fixes: 8c0498b689 ("perf evlist: Fix create_syswide_maps() not propagating maps")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bda840191d ]
In debug_file, pr_warning_once is called on error. As that function
calls debug_file the function will yield a stack overflow. Switch the
location of the call so the recursion is avoided.
Reviewed-by: Howard Chu <howardchu95@gmail.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20250228222308.626803-2-irogers@google.com
Fixes: ec49230cf6 ("perf debug: Expose debug file")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee735aa33d ]
The array contains only 5 elements, but the index calculated by
veml6075_read_int_time_index can range from 0 to 7,
which could lead to out-of-bounds access. The check prevents this issue.
Coverity Issue
CID 1574309: (#1 of 1): Out-of-bounds read (OVERRUN)
overrun-local: Overrunning array veml6075_it_ms of 5 4-byte
elements at element index 7 (byte offset 31) using
index int_index (which evaluates to 7)
This is hardening against potentially broken hardware. Good to have
but not necessary to backport.
Fixes: 3b82f43238 ("iio: light: add VEML6075 UVA and UVB light sensor driver")
Signed-off-by: Karan Sanghavi <karansanghvi98@gmail.com>
Reviewed-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/Z7dnrEpKQdRZ2qFU@Emma
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2416cec859 ]
Datasheet recommends Setting the MOSI idle state to high in order to
prevent accidental reset of the device when SCLK is free running.
This happens when the controller clocks out a 1 followed by 63 zeros
while the CS is held low.
Check if SPI controller supports SPI_MOSI_IDLE_HIGH flag and set it.
Fixes: a5f8c7da3d ("iio: adc: Add AD7768-1 ADC basic support")
Signed-off-by: Jonathan Santos <Jonathan.Santos@analog.com>
Reviewed-by: Marcelo Schmitt <marcelo.schmitt@analog.com>
Link: https://patch.msgid.link/c2a2b0f3d54829079763a5511359a1fa80516cfb.1741268122.git.Jonathan.Santos@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7b6033ed5a ]
Checking the binary representation of two structs (of the same type)
for equality doesn't have the same semantic as comparing all members for
equality. The former might find a difference where the latter doesn't in
the presence of padding or when ambiguous types like float or bool are
involved. (Floats typically have different representations for single
values, like -0.0 vs +0.0, or 0.5 * 2² vs 0.25 * 2³. The type bool has
at least 8 bits and the raw values 1 and 2 (probably) both evaluate to
true, but memcmp finds a difference.)
When searching for a channel that already has the configuration we need,
the comparison by member is the one that is needed.
Convert the comparison accordingly to compare the members one after
another. Also add a static_assert guard to (somewhat) ensure that when
struct ad7173_channel_config::config_props is expanded, the comparison
is adapted, too.
This issue is somewhat theoretic, but using memcmp() on a struct is a
bad pattern that is worth fixing.
Fixes: 76a1e6a428 ("iio: adc: ad7173: add AD7173 driver")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20250303114659.1672695-14-u.kleine-koenig@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 05a5d874f7 ]
Checking the binary representation of two structs (of the same type)
for equality doesn't have the same semantic as comparing all members for
equality. The former might find a difference where the latter doesn't in
the presence of padding or when ambiguous types like float or bool are
involved. (Floats typically have different representations for single
values, like -0.0 vs +0.0, or 0.5 * 2² vs 0.25 * 2³. The type bool has
at least 8 bits and the raw values 1 and 2 (probably) both evaluate to
true, but memcmp finds a difference.)
When searching for a channel that already has the configuration we need,
the comparison by member is the one that is needed.
Convert the comparison accordingly to compare the members one after
another. Also add a static_assert guard to (somewhat) ensure that when
struct ad7124_channel_config::config_props is expanded, the comparison
is adapted, too.
This issue is somewhat theoretic, but using memcmp() on a struct is a
bad pattern that is worth fixing.
Fixes: 7b8d045e49 ("iio: adc: ad7124: allow more than 8 channels")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20250303114659.1672695-13-u.kleine-koenig@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 280acb1982 ]
Checking the binary representation of two structs (of the same type)
for equality doesn't have the same semantic as comparing all members for
equality. The former might find a difference where the latter doesn't in
the presence of padding or when ambiguous types like float or bool are
involved. (Floats typically have different representations for single
values, like -0.0 vs +0.0, or 0.5 * 2² vs 0.25 * 2³. The type bool has
at least 8 bits and the raw values 1 and 2 (probably) both evaluate to
true, but memcmp finds a difference.)
When searching for a channel that already has the configuration we need,
the comparison by member is the one that is needed.
Convert the comparison accordingly to compare the members one after
another. Also add a static_assert guard to (somewhat) ensure that when
struct ad4130_setup_info is expanded, the comparison is adapted, too.
This issue is somewhat theoretic, but using memcmp() on a struct is a
bad pattern that is worth fixing.
Fixes: 62094060cf ("iio: adc: ad4130: add AD4130 driver")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20250303114659.1672695-12-u.kleine-koenig@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c9c59da76c ]
There is kernel dump when do module test:
sysfs: cannot create duplicate filename
/devices/platform/soc@0/44000000.bus/44000000.dma-controller/dma/dma0chan0
__dma_async_device_channel_register+0x128/0x19c
dma_async_device_register+0x150/0x454
fsl_edma_probe+0x6cc/0x8a0
platform_probe+0x68/0xc8
fsl_edma_cleanup_vchan will unlink vchan.chan.device_node, while
dma_async_device_unregister needs the link to do
__dma_async_device_channel_unregister. So need move fsl_edma_cleanup_vchan
after dma_async_device_unregister to make sure channel could be freed.
So clean up chan after dma_async_device_unregister to address this.
Fixes: 6f93b93b2a ("dmaengine: fsl-edma: kill the tasklets upon exit")
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20250228071720.3780479-1-peng.fan@oss.nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6bb81b94f7 ]
The "de_off" and "used" variables come from the disk so they both need to
check. The problem is that on 32bit systems if they're both greater than
UINT_MAX - 16 then the check does work as intended because of an integer
overflow.
Fixes: 60ce8dfde0 ("fs/ntfs3: Fix wrong if in hdr_first_de")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ad414f4df ]
On 32bit systems the "off + sizeof(struct NTFS_DE)" addition can
have an integer wrapping issue. Fix it by using size_add().
Fixes: 82cae269cf ("fs/ntfs3: Add initialization of super block")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 55741c7233 ]
The ffs() function returns the index of the first set bit, starting from 1.
If no bits are set, it returns zero. This behavior causes an off-by-one
page size in the debug message, as the page size calculation [1]
is zero-based, while ffs() is one-based.
Fix this by subtracting one from the result of ffs(). Note that since
variable 'val' is unsigned, subtracting one from zero will result in the
maximum unsigned integer value. Consequently, the condition 'if (val < 16)'
will still function correctly.
[1], Page size: (2^(n+12)), where 'n' is the set page size bit.
Fixes: 81720ec532 ("usb: host: xhci: use ffs() in xhci_mem_init()")
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250306144954.3507700-9-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
