Commit graph

1,403,262 commits

Author SHA1 Message Date
Wentao Liang
9364f17ba4 bcachefs: Add error handling for zlib_deflateInit2()
In attempt_compress(), the return value of zlib_deflateInit2() needs to be
checked. A proper implementation can be found in  pstore_compress().

Add an error check and return 0 immediately if the initialzation fails.

Fixes: 986e9842fb ("bcachefs: Compression levels")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-04-03 12:11:42 -04:00
Gustavo A. R. Silva
446d38554d drm/nouveau: disp: Avoid -Wflex-array-member-not-at-end warning
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.

Use the `DEFINE_RAW_FLEX()` helper for an on-stack definition of
a flexible structure where the size of the flexible-array member
is known at compile-time, and refactor the rest of the code,
accordingly.

So, with these changes, fix the following warning:

drivers/gpu/drm/nouveau/dispnv50/disp.c:779:47: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/Z-2zI55Qf88jTfNK@kspp
2025-04-03 18:02:18 +02:00
Gustavo A. R. Silva
e876bfecbd drm/nouveau: svm: Avoid -Wflex-array-member-not-at-end warning
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.

Use the `DEFINE_RAW_FLEX()` helper for an on-stack definition of
a flexible structure where the size of the flexible-array member
is known at compile-time, and refactor the rest of the code,
accordingly.

So, with these changes, fix the following warning:

drivers/gpu/drm/nouveau/nouveau_svm.c:724:44: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/Z-2uezeHt1aaHH6x@kspp
2025-04-03 18:02:18 +02:00
Gustavo A. R. Silva
1bced6c7f6 drm/nouveau: fence: Avoid -Wflex-array-member-not-at-end warning
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.

Use the `DEFINE_RAW_FLEX()` helper for an on-stack definition of
a flexible structure where the size of the flexible-array member
is known at compile-time, and refactor the rest of the code,
accordingly.

So, with these changes, fix the following warning:

drivers/gpu/drm/nouveau/nouveau_fence.c:188:38: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/Z-2r6v-Cji7vwOsz@kspp
2025-04-03 18:02:18 +02:00
Palmer Dabbelt
3eb64093f5 riscv patches for 6.15-rc1, part 2
* A bunch of fixes:
   - 2 fixes in the purgatory code which prevented kexec to work
   - Workaround an issue with gcc-15
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQQgN2CKhD/Nf5v80u9kP7K8koXvigUCZ+uRYgAKCRBkP7K8koXv
 iiroAQCIF7ojJGZvdRfAeknzb1WKM2GFucVTRxwyicyg/9omGQD5AYGYsaQSbN4H
 j8ToELbTEnsY8YqRaQgm/AiuIkpM1AE=
 =db0s
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEAM520YNJYN/OiG3470yhUCzLq0EFAmfurxYTHHBhbG1lckBk
 YWJiZWx0LmNvbQAKCRDvTKFQLMurQSEaD/9Lp/ZQxW2+oCZQ/MxXPnn7MVBn4ncY
 SC6xVzdSye14A9RyaTUnCZIklNhOA5iKs5uZBm3mH0MTaL5K/LqtO+gKCkduT30k
 Rt5DKJWaXzsi3QNVq12Lakun7xJV8auYJP3rWj6rLdSo8wOG3PF2T4+L9kie+WtB
 EhxdfOK3oF1JV0a0q7E0D599K9E/y0T/kXeNzjvt4uhJVHY096LJY3GcMBvAUuDx
 aS4gF3DS2iURvZfCFZKIJhzXMz5p2bQqngDvpNit1cmHgT/4EBM7hahqfGXlP1oG
 pUTsktsnPBntXWCIKLfsac6XMKVCj3J5pqmn8cvhyALO3AjB+kU921xhRe9OyMpL
 zlBb/4B9AB4Yf6EMGLecbzaf/WX2m+L/vS+AJdD7D88X9k4kSnT4WBs90gUwyD/I
 wCGadWQtZvrwH6LENdiuuyLdHldmG76hnHjglIBJSkQCqTBFlnvHwlYI7QQ3AXd7
 TrRS2G7tcMaAd0tyIJ9FaaZdlgmc7wTQjvaJz1oTwx8nHRo4ApwEnRs1oCxyDO3I
 L+cfVcQLdsHnxdUeCssLkJHAfjU4HC8jweh7u1Q0LDcrdJb3nMkwzYrHTXunGrK6
 TELnsbnRNrYmvsV0AWEiJB0ymgoCuhapqSUuaLyWaeoKXOPKrZltkRsPBKbUGaIm
 V3z/XjtMJenbOQ==
 =tmof
 -----END PGP SIGNATURE-----

Merge tag 'riscv-mw2-6.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/alexghiti/linux into for-next

riscv patches for 6.15-rc1, part 2

* A bunch of fixes:
  - 2 fixes in the purgatory code which prevented kexec to work
  - Workaround an issue with gcc-15

* tag 'riscv-mw2-6.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/alexghiti/linux:
  riscv: Add norvc after .option arch in runtime const
  riscv: Make sure toolchain supports zba before using zba instructions
  riscv/purgatory: 4B align purgatory_start
  riscv/kexec_file: Handle R_RISCV_64 in purgatory relocator
  selftests: riscv: fix v_exec_initval_nolibc.c
  riscv: Fix hugetlb retrieval of number of ptes in case of !present pte
  riscv: print hartid on bringup
  dt-bindings: riscv: document vector crypto requirements
  dt-bindings: riscv: add vector sub-extension dependencies
  dt-bindings: riscv: d requires f
  RISC-V: add f & d extension validation checks
  RISC-V: add vector crypto extension validation checks
  RISC-V: add vector extension validation checks
2025-04-03 08:53:19 -07:00
Charles Han
e773db73fd drm/sti: fix inconsistent indenting warning
Fix below inconsistent indenting smatch warning.
smatch warnings:
drivers/gpu/drm/sti/sti_hda.c:696 sti_hda_bind() warn: inconsistent indenting

Signed-off-by: Charles Han <hanchunchao@inspur.com>
Acked-by: Raphaël Gallais-Pou <rgallaispou@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250305101641.2399-1-hanchunchao@inspur.com
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
2025-04-03 17:22:56 +02:00
Chandrakanth Patil
1b4902f0a4 scsi: megaraid_sas: Driver version update to 07.734.00.00-rc1
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Link: https://lore.kernel.org/r/20250402193735.5098-2-chandrakanth.patil@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-04-03 11:16:19 -04:00
Chandrakanth Patil
aad9945623 scsi: megaraid_sas: Block zero-length ATA VPD inquiry
A firmware bug was observed where ATA VPD inquiry commands with a
zero-length data payload were not handled and failed with a non-standard
status code of 0xf0.

Avoid sending ATA VPD inquiry commands without data payload by setting
the device no_vpd_size flag to 1. In addition, if the firmware returns a
status code of 0xf0, set scsi_cmnd->result to CHECK_CONDITION to
facilitate proper error handling.

Suggested-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Chandrakanth Patil <chandrakanth.patil@broadcom.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250402193735.5098-1-chandrakanth.patil@broadcom.com
Tested-by: Ryan Lahfa <ryan@lahfa.xyz>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-04-03 11:16:19 -04:00
Li Haoran
a63b69f05f scsi: scsi_transport_srp: Replace min/max nesting with clamp()
This patch replaces min(a, max(b, c)) by clamp(val, lo, hi) in the SRP
transport layer. The clamp() macro explicitly expresses the intent of
constraining a value within bounds, improving code readability.

Signed-off-by: Li Haoran <li.haoran7@zte.com.cn>
Signed-off-by: Shao Mingyin <shao.mingyin@zte.com.cn>
Link: https://lore.kernel.org/r/202503311555115618U8Md16mKpRYOIy2TOmB6@zte.com.cn
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-04-03 10:54:31 -04:00
Bao D. Nguyen
1fd2e77b88 scsi: ufs: core: Add device level exception support
The ufs device JEDEC specification version 4.1 adds support for the
device level exception events. To support this new device level
exception feature, expose two new sysfs nodes below to provide the user
space access to the device level exception information.

/sys/bus/platform/drivers/ufshcd/*/device_lvl_exception_count
/sys/bus/platform/drivers/ufshcd/*/device_lvl_exception_id

The device_lvl_exception_count sysfs node reports the number of device
level exceptions that have occurred since the last time this variable is
reset. Writing a value of 0 will reset it.  The device_lvl_exception_id
reports the exception ID which is the qDeviceLevelExceptionID attribute
of the device JEDEC specifications version 4.1 and later. The user space
application can query these sysfs nodes to get more information about
the device level exception.

Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Link: https://lore.kernel.org/r/6278d7c125b2f0cf5056f4a647a4b9c1fdd24fc7.1743198325.git.quic_nguyenb@quicinc.com
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Arthur Simchaev <arthur.simchaev@sandisk.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-04-03 10:54:31 -04:00
Bao D. Nguyen
bdab40480b scsi: ufs: core: Rename ufshcd_wb_presrv_usrspc_keep_vcc_on()
The ufshcd_wb_presrv_usrspc_keep_vcc_on() function has deviated from its
original implementation. The "_keep_vcc_on" part of the function name is
misleading. Rename the function to ufshcd_wb_curr_buff_threshold_check()
to improve the readability. Also, updated the comments in the function.
There is no change to the functionality.

Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Link: https://lore.kernel.org/r/02ae5e133f6ebf23b54d943e6d1d9de2544eb80e.1743192926.git.quic_nguyenb@quicinc.com
Reviewed-by: Avri Altman <avri.altman@sandisk.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-04-03 10:48:50 -04:00
Ming Lei
01b91bf14f block: don't grab elevator lock during queue initialization
->elevator_lock depends on queue freeze lock, see block/blk-sysfs.c.

queue freeze lock depends on fs_reclaim.

So don't grab elevator lock during queue initialization which needs to
call kmalloc(GFP_KERNEL), and we can cut the dependency between
->elevator_lock and fs_reclaim, then the lockdep warning can be killed.

This way is safe because elevator setting isn't ready to run during
queue initialization.

There isn't such issue in __blk_mq_update_nr_hw_queues() because
memalloc_noio_save() is called before acquiring elevator lock.

Fixes the following lockdep warning:

https://lore.kernel.org/linux-block/67e6b425.050a0220.2f068f.007b.GAE@google.com/

Reported-by: syzbot+4c7e0f9b94ad65811efb@syzkaller.appspotmail.com
Cc: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250403105402.1334206-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-04-03 08:32:03 -06:00
Pavel Begunkov
390513642e io_uring: always do atomic put from iowq
io_uring always switches requests to atomic refcounting for iowq
execution before there is any parallilism by setting REQ_F_REFCOUNT,
and the flag is not cleared until the request completes. That should be
fine as long as the compiler doesn't make up a non existing value for
the flags, however KCSAN still complains when the request owner changes
oter flag bits:

BUG: KCSAN: data-race in io_req_task_cancel / io_wq_free_work
...
read to 0xffff888117207448 of 8 bytes by task 3871 on cpu 0:
 req_ref_put_and_test io_uring/refs.h:22 [inline]

Skip REQ_F_REFCOUNT checks for iowq, we know it's set.

Reported-by: syzbot+903a2ad71fb3f1e47cf5@syzkaller.appspotmail.com
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/d880bc27fb8c3209b54641be4ff6ac02b0e5789a.1743679736.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-04-03 08:31:57 -06:00
Uros Bizjak
fc1cd60042 x86/idle: Use MONITOR and MWAIT mnemonics in <asm/mwait.h>
Current minimum required version of binutils is 2.25,
which supports MONITOR and MWAIT instruction mnemonics.

Replace the byte-wise specification of MONITOR and
MWAIT with these proper mnemonics.

No functional change intended.

Note: LLVM assembler is not able to assemble correct forms of MONITOR
and MWAIT instructions with explicit operands and reports:

  error: invalid operand for instruction
          monitor %rax,%ecx,%edx
                       ^~~~
  # https://lore.kernel.org/oe-kbuild-all/202504030802.2lEVBSpN-lkp@intel.com/

Use instruction mnemonics with implicit operands to
work around this issue.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250403125111.429805-1-ubizjak@gmail.com
2025-04-03 16:28:38 +02:00
Uros Bizjak
a17b37a3f4 x86/idle: Change arguments of mwait_idle_with_hints() to u32
All functions in mwait_idle_with_hints() cast eax and ecx arguments
to u32. Propagate argument type to the enclosing function.

Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250403073105.245987-1-ubizjak@gmail.com
2025-04-03 16:27:42 +02:00
Imre Deak
a73d71366e drm/dp_mst: Use drm_dp_dpcd_write_data() to write GUID for non-root MST branch devices
drm_dp_dpcd_write_data() can be used to write the GUID for a non-root
MST branch device, similarly to writing the GUID to a root MST branch
device, do so.

Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250401103846.686408-2-imre.deak@intel.com
2025-04-03 17:14:19 +03:00
Aditya Dutt
5dff41a863 jfs: fix array-index-out-of-bounds read in add_missing_indices
stbl is s8 but it must contain offsets into slot which can go from 0 to
127.

Added a bound check for that error and return -EIO if the check fails.
Also make jfs_readdir return with error if add_missing_indices returns
with an error.

Reported-by: syzbot+b974bd41515f770c608b@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com./bug?extid=b974bd41515f770c608b
Signed-off-by: Aditya Dutt <duttaditya18@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
2025-04-03 09:11:43 -05:00
Dylan Wolff
a4685408ff jfs: Fix null-ptr-deref in jfs_ioc_trim
[ Syzkaller Report ]

Oops: general protection fault, probably for non-canonical address
0xdffffc0000000087: 0000 [#1
KASAN: null-ptr-deref in range [0x0000000000000438-0x000000000000043f]
CPU: 2 UID: 0 PID: 10614 Comm: syz-executor.0 Not tainted
6.13.0-rc6-gfbfd64d25c7a-dirty #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Sched_ext: serialise (enabled+all), task: runnable_at=-30ms
RIP: 0010:jfs_ioc_trim+0x34b/0x8f0
Code: e7 e8 59 a4 87 fe 4d 8b 24 24 4d 8d bc 24 38 04 00 00 48 8d 93
90 82 fe ff 4c 89 ff 31 f6
RSP: 0018:ffffc900055f7cd0 EFLAGS: 00010206
RAX: 0000000000000087 RBX: 00005866a9e67ff8 RCX: 000000000000000a
RDX: 0000000000000001 RSI: 0000000000000004 RDI: 0000000000000001
RBP: dffffc0000000000 R08: ffff88807c180003 R09: 1ffff1100f830000
R10: dffffc0000000000 R11: ffffed100f830001 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000438
FS:  00007fe520225640(0000) GS:ffff8880b7e80000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005593c91b2c88 CR3: 000000014927c000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? __die_body+0x61/0xb0
? die_addr+0xb1/0xe0
? exc_general_protection+0x333/0x510
? asm_exc_general_protection+0x26/0x30
? jfs_ioc_trim+0x34b/0x8f0
jfs_ioctl+0x3c8/0x4f0
? __pfx_jfs_ioctl+0x10/0x10
? __pfx_jfs_ioctl+0x10/0x10
__se_sys_ioctl+0x269/0x350
? __pfx___se_sys_ioctl+0x10/0x10
? do_syscall_64+0xfb/0x210
do_syscall_64+0xee/0x210
? syscall_exit_to_user_mode+0x1e0/0x330
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fe51f4903ad
Code: c3 e8 a7 2b 00 00 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 89 f8 48
89 f7 48 89 d6 48 89 ca 4d
RSP: 002b:00007fe5202250c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007fe51f5cbf80 RCX: 00007fe51f4903ad
RDX: 0000000020000680 RSI: 00000000c0185879 RDI: 0000000000000005
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe520225640
R13: 000000000000000e R14: 00007fe51f44fca0 R15: 00007fe52021d000
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010:jfs_ioc_trim+0x34b/0x8f0
Code: e7 e8 59 a4 87 fe 4d 8b 24 24 4d 8d bc 24 38 04 00 00 48 8d 93
90 82 fe ff 4c 89 ff 31 f6
RSP: 0018:ffffc900055f7cd0 EFLAGS: 00010206
RAX: 0000000000000087 RBX: 00005866a9e67ff8 RCX: 000000000000000a
RDX: 0000000000000001 RSI: 0000000000000004 RDI: 0000000000000001
RBP: dffffc0000000000 R08: ffff88807c180003 R09: 1ffff1100f830000
R10: dffffc0000000000 R11: ffffed100f830001 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000438
FS:  00007fe520225640(0000) GS:ffff8880b7e80000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005593c91b2c88 CR3: 000000014927c000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Kernel panic - not syncing: Fatal exception

[ Analysis ]

We believe that we have found a concurrency bug in the `fs/jfs` module
that results in a null pointer dereference. There is a closely related
issue which has been fixed:

https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=d6c1b3599b2feb5c7291f5ac3a36e5fa7cedb234

... but, unfortunately, the accepted patch appears to still be
susceptible to a null pointer dereference under some interleavings.

To trigger the bug, we think that `JFS_SBI(ipbmap->i_sb)->bmap` is set
to NULL in `dbFreeBits` and then dereferenced in `jfs_ioc_trim`. This
bug manifests quite rarely under normal circumstances, but is
triggereable from a syz-program.

Reported-and-tested-by: Dylan J. Wolff<wolffd@comp.nus.edu.sg>
Reported-and-tested-by: Jiacheng Xu <stitch@zju.edu.cn>
Signed-off-by: Dylan J. Wolff<wolffd@comp.nus.edu.sg>
Signed-off-by: Jiacheng Xu <stitch@zju.edu.cn>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
2025-04-03 09:11:42 -05:00
Vasiliy Kovalev
37bfb464dd jfs: validate AG parameters in dbMount() to prevent crashes
Validate db_agheight, db_agwidth, and db_agstart in dbMount to catch
corrupted metadata early and avoid undefined behavior in dbAllocAG.
Limits are derived from L2LPERCTL, LPERCTL/MAXAG, and CTLTREESIZE:

- agheight: 0 to L2LPERCTL/2 (0 to 5) ensures shift
  (L2LPERCTL - 2*agheight) >= 0.
- agwidth: 1 to min(LPERCTL/MAXAG, 2^(L2LPERCTL - 2*agheight))
  ensures agperlev >= 1.
  - Ranges: 1-8 (agheight 0-3), 1-4 (agheight 4), 1 (agheight 5).
  - LPERCTL/MAXAG = 1024/128 = 8 limits leaves per AG;
    2^(10 - 2*agheight) prevents division to 0.
- agstart: 0 to CTLTREESIZE-1 - agwidth*(MAXAG-1) keeps ti within
  stree (size 1365).
  - Ranges: 0-1237 (agwidth 1), 0-348 (agwidth 8).

UBSAN: shift-out-of-bounds in fs/jfs/jfs_dmap.c:1400:9
shift exponent -335544310 is negative
CPU: 0 UID: 0 PID: 5822 Comm: syz-executor130 Not tainted 6.14.0-rc5-syzkaller #0
Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:94 [inline]
 dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
 ubsan_epilogue lib/ubsan.c:231 [inline]
 __ubsan_handle_shift_out_of_bounds+0x3c8/0x420 lib/ubsan.c:468
 dbAllocAG+0x1087/0x10b0 fs/jfs/jfs_dmap.c:1400
 dbDiscardAG+0x352/0xa20 fs/jfs/jfs_dmap.c:1613
 jfs_ioc_trim+0x45a/0x6b0 fs/jfs/jfs_discard.c:105
 jfs_ioctl+0x2cd/0x3e0 fs/jfs/ioctl.c:131
 vfs_ioctl fs/ioctl.c:51 [inline]
 __do_sys_ioctl fs/ioctl.c:906 [inline]
 __se_sys_ioctl+0xf5/0x170 fs/ioctl.c:892
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x77/0x7f

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Cc: stable@vger.kernel.org
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: syzbot+fe8264911355151c487f@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=fe8264911355151c487f
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
2025-04-03 09:11:42 -05:00
Martin Wilck
a2d5a00722 scsi: smartpqi: Use is_kdump_kernel() to check for kdump
The smartpqi driver checks the reset_devices variable to determine
whether special adjustments need to be made for kdump. This has the
effect that after a regular kexec reboot, some driver parameters such as
max_transfer_size are much lower than usual. More importantly, kexec
reboot tests have revealed memory corruption caused by the driver log
being written to system memory after a kexec.

Fix this by testing is_kdump_kernel() rather than reset_devices where
appropriate.

Fixes: 058311b72f ("scsi: smartpqi: Add fw log to kdump")
Signed-off-by: Martin Wilck <mwilck@suse.com>
Link: https://lore.kernel.org/r/20250321223319.109250-1-mwilck@suse.com
Cc: Randy Wright <rwright@hpe.com>
Acked-by: Don Brace <don.brace@microchip.com>
Tested-by: Don Brace <don.brace@microchip.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-04-03 10:08:03 -04:00
Igor Pylypiv
f7b705c238 scsi: pm80xx: Set phy_attached to zero when device is gone
When a fatal error occurs, a phy down event may not be received to set
phy->phy_attached to zero.

Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Salomon Dushimirimana <salomondush@google.com>
Link: https://lore.kernel.org/r/20250319230305.3172920-1-salomondush@google.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-04-03 10:06:10 -04:00
Imre Deak
aea007741b drm/dp_mst: Fix GUID DPCD write to non-root MST branch devices
The return value on success of drm_dp_send_dpcd_write() called for
non-root MST branch devices from drm_dp_check_mstb_guid() is the number
of bytes transferred. Atm this return value (in case of a complete read)
will be regarded incorrectly as an error by the caller of
drm_dp_check_mstb_guid(). Fix this by converting the return value for a
complete read to the expected success code (0) and for a partial read to
a failure code (-EPROTO).

Fixes: 2554da0de3 ("drm/display: dp-mst-topology: use new DCPD access helpers")
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Lyude Paul <lyude@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250401103846.686408-1-imre.deak@intel.com
2025-04-03 17:03:01 +03:00
Martin K. Petersen
8a65b75dc4 Merge patch series "ufs-exynos stability fixes for gs101"
Peter Griffin <peter.griffin@linaro.org> says:

Hi folks,

This series fixes several stability issues with the upstream ufs-exynos
driver, specifically for the gs101 SoC found in Pixel 6.

The main fix is regarding the IO cache coherency setting and ensuring
that it is correctly applied depending on if the dma-coherent property
is specified in device tree. This fixes the UFS stability issues on gs101
and I would imagine will also fix issues on exynosauto platform that
seems to have similar iocc shareability bits.

Additionally the phy reference counting is fixed which allows module
load/unload to work reliably and keeps the phy state machine in sync
with the controller glue driver.

regards,

Peter

Link: https://lore.kernel.org/r/20250319-exynos-ufs-stability-fixes-v2-0-96722cc2ba1b@linaro.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-04-03 09:58:05 -04:00
Peter Griffin
cd4c002506 scsi: ufs: exynos: gs101: Put UFS device in reset on .suspend()
GPIO_OUT[0] is connected to the reset pin of embedded UFS device.
Before powering off the phy assert the reset signal.

This is added as a gs101 specific suspend hook so as not to have any
unintended consequences for other SoCs supported by this driver.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250319-exynos-ufs-stability-fixes-v2-7-96722cc2ba1b@linaro.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-04-03 09:53:51 -04:00
Peter Griffin
67e4085015 scsi: ufs: exynos: Move phy calls to .exit() callback
ufshcd_pltfrm_remove() calls ufshcd_remove(hba) which in turn calls
ufshcd_hba_exit().

By moving the phy_power_off() and phy_exit() calls to the newly created
.exit callback they get called by ufshcd_variant_hba_exit() before
ufshcd_hba_exit() turns off the regulators. This is also similar flow to
the ufs-qcom driver.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250319-exynos-ufs-stability-fixes-v2-6-96722cc2ba1b@linaro.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-04-03 09:53:51 -04:00
Peter Griffin
deac9ad496 scsi: ufs: exynos: Enable PRDT pre-fetching with UFSHCD_CAP_CRYPTO
PRDT_PREFETCH_ENABLE[31] bit should be set when desctype field of
fmpsecurity0 register is type2 (double file encryption) or type3
(support for file and disk encryption). Setting this bit enables PRDT
pre-fetching on both TXPRDT and RXPRDT.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250319-exynos-ufs-stability-fixes-v2-5-96722cc2ba1b@linaro.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-04-03 09:53:51 -04:00
Peter Griffin
7f05fd9a3b scsi: ufs: exynos: Ensure consistent phy reference counts
ufshcd_link_startup() can call ufshcd_vops_link_startup_notify()
multiple times when retrying. This causes the phy reference count to
keep increasing and the phy to not properly re-initialize.

If the phy has already been previously powered on, first issue a
phy_power_off() and phy_exit(), before re-initializing and powering on
again.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250319-exynos-ufs-stability-fixes-v2-4-96722cc2ba1b@linaro.org
Fixes: 3d73b200f9 ("scsi: ufs: ufs-exynos: Change ufs phy control sequence")
Cc: stable@vger.kernel.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-04-03 09:53:51 -04:00
Peter Griffin
f92bb74368 scsi: ufs: exynos: Disable iocc if dma-coherent property isn't set
If dma-coherent property isn't set then descriptors are non-cacheable
and the iocc shareability bits should be disabled. Without this UFS can
end up in an incompatible configuration and suffer from random cache
related stability issues.

Suggested-by: Bart Van Assche <bvanassche@acm.org>
Fixes: cc52e15397 ("scsi: ufs: ufs-exynos: Support ExynosAuto v9 UFS")
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250319-exynos-ufs-stability-fixes-v2-3-96722cc2ba1b@linaro.org
Cc: Chanho Park <chanho61.park@samsung.com>
Cc: stable@vger.kernel.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-04-03 09:53:50 -04:00
Peter Griffin
68f5ef7eeb scsi: ufs: exynos: Move UFS shareability value to drvdata
gs101 I/O coherency shareability bits differ from exynosauto SoC. To
support both SoCs move this info the SoC drvdata.

Currently both the value and mask are the same for both gs101 and
exynosauto, thus we use the same value.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250319-exynos-ufs-stability-fixes-v2-2-96722cc2ba1b@linaro.org
Fixes: d11e0a318d ("scsi: ufs: exynos: Add support for Tensor gs101 SoC")
Cc: stable@vger.kernel.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-04-03 09:53:50 -04:00
Peter Griffin
3d101165e7 scsi: ufs: exynos: Ensure pre_link() executes before exynos_ufs_phy_init()
Ensure clocks are enabled before configuring unipro. Additionally move
the pre_link() hook before the exynos_ufs_phy_init() calls. This means
the register write sequence more closely resembles the ordering of the
downstream driver.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250319-exynos-ufs-stability-fixes-v2-1-96722cc2ba1b@linaro.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-04-03 09:53:50 -04:00
Miaoqian Lin
72eea84a10 scsi: iscsi: Fix missing scsi_host_put() in error path
Add goto to ensure scsi_host_put() is called in all error paths of
iscsi_set_host_param() function. This fixes a potential memory leak when
strlen() check fails.

Fixes: ce51c81700 ("scsi: iscsi: Add strlen() check in iscsi_if_set{_host}_param()")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20250318094344.91776-1-linmq006@gmail.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-04-03 09:46:03 -04:00
Borislav Petkov (AMD)
2fb34b1566 x86/tlb: Simplify choose_new_asid() and generate better code
Have it return the two things it does return:

 - a new ASID and
 - the need to flush the TLB or not,

in a struct which fits in a single 32-bit register and whack the IO
parameters.

Beyond being easier to read, this also helps the compiler generate
better, more compact code:

  # arch/x86/mm/tlb.o:

  text     data      bss      dec      hex  filename
  9341      753      516    10610     2972  tlb.o.before
  9213      753      516    10482     28f2  tlb.o.after

No functional changes.

Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250403085623.20824-1-bp@kernel.org
2025-04-03 13:35:37 +02:00
Lin Ma
1b755d8eb1 netfilter: nft_tunnel: fix geneve_opt type confusion addition
When handling multiple NFTA_TUNNEL_KEY_OPTS_GENEVE attributes, the
parsing logic should place every geneve_opt structure one by one
compactly. Hence, when deciding the next geneve_opt position, the
pointer addition should be in units of char *.

However, the current implementation erroneously does type conversion
before the addition, which will lead to heap out-of-bounds write.

[    6.989857] ==================================================================
[    6.990293] BUG: KASAN: slab-out-of-bounds in nft_tunnel_obj_init+0x977/0xa70
[    6.990725] Write of size 124 at addr ffff888005f18974 by task poc/178
[    6.991162]
[    6.991259] CPU: 0 PID: 178 Comm: poc-oob-write Not tainted 6.1.132 #1
[    6.991655] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
[    6.992281] Call Trace:
[    6.992423]  <TASK>
[    6.992586]  dump_stack_lvl+0x44/0x5c
[    6.992801]  print_report+0x184/0x4be
[    6.993790]  kasan_report+0xc5/0x100
[    6.994252]  kasan_check_range+0xf3/0x1a0
[    6.994486]  memcpy+0x38/0x60
[    6.994692]  nft_tunnel_obj_init+0x977/0xa70
[    6.995677]  nft_obj_init+0x10c/0x1b0
[    6.995891]  nf_tables_newobj+0x585/0x950
[    6.996922]  nfnetlink_rcv_batch+0xdf9/0x1020
[    6.998997]  nfnetlink_rcv+0x1df/0x220
[    6.999537]  netlink_unicast+0x395/0x530
[    7.000771]  netlink_sendmsg+0x3d0/0x6d0
[    7.001462]  __sock_sendmsg+0x99/0xa0
[    7.001707]  ____sys_sendmsg+0x409/0x450
[    7.002391]  ___sys_sendmsg+0xfd/0x170
[    7.003145]  __sys_sendmsg+0xea/0x170
[    7.004359]  do_syscall_64+0x5e/0x90
[    7.005817]  entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[    7.006127] RIP: 0033:0x7ec756d4e407
[    7.006339] Code: 48 89 fa 4c 89 df e8 38 aa 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00 83 e2 39 83 faf
[    7.007364] RSP: 002b:00007ffed5d46760 EFLAGS: 00000202 ORIG_RAX: 000000000000002e
[    7.007827] RAX: ffffffffffffffda RBX: 00007ec756cc4740 RCX: 00007ec756d4e407
[    7.008223] RDX: 0000000000000000 RSI: 00007ffed5d467f0 RDI: 0000000000000003
[    7.008620] RBP: 00007ffed5d468a0 R08: 0000000000000000 R09: 0000000000000000
[    7.009039] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000000
[    7.009429] R13: 00007ffed5d478b0 R14: 00007ec756ee5000 R15: 00005cbd4e655cb8

Fix this bug with correct pointer addition and conversion in parse
and dump code.

Fixes: 925d844696 ("netfilter: nft_tunnel: add support for geneve opts")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2025-04-03 13:32:03 +02:00
Uros Bizjak
a72d55dc3b x86/idle: Remove CONFIG_AS_TPAUSE
There is not much point in CONFIG_AS_TPAUSE at all when the emitted
assembly is always the same - it only obfuscates the __tpause() code
in essence.

Remove the TPAUSE insn mnemonic from __tpause() and leave only
the equivalent byte-wise definition. This can then be changed
back to insn mnemonic once binutils 2.31.1 is the minimum version
to build the kernel. (Right now it's 2.25.)

Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250402180827.3762-4-ubizjak@gmail.com
2025-04-03 13:19:18 +02:00
Uros Bizjak
19c3dcd953 x86/idle: Remove .s output beautifying delimiters from simpler asm() templates
Delimiters in asm() templates such as ';', '\t' or '\n' are not
required syntactically, they were used historically in the Linux
kernel to prettify the compiler's .s output for people who were
looking at compiler generated .s output.

Most x86 developers these days are primarily looking at:

  1) objdump --disassemble-all .o

  2) perf top's live kernel function annotation and disassembler
     feature that uses /dev/mem.

... because:

 - this kind of assembler output is standardized regardless of
   compiler used,

 - it's generally less messy looking,

 - it gives ground-truth instead of being some intermediate layer
   in the toolchain that might or might not be the real deal,

 - and on a live kernel it also sees through the kernel's various
   layers of runtime patching code obfuscation facilities, also
   known as: alternative-instructions, tracepoints and jump labels.

There are some cases where the .s output is the most useful
tool, such as alternatives() code generation, but other than
that these delimiters used in simple asm() statements mostly
add noise to the source code side, which isn't desirable for
assembly code that is fragile enough already.

Remove the delimiters for <asm/mwait.h>, which also happens to
make the GCC inliner's asm() instruction length heuristics
more accurate...

[ mingo: Wrote a new changelog to give historic context and
         to give people a chance to object. :-) ]

Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250402180827.3762-3-ubizjak@gmail.com
2025-04-03 13:19:18 +02:00
Mathieu Desnoyers
169eae7711 rseq: Eliminate useless task_work on execve
Eliminate a useless task_work on execve by moving the call to
rseq_set_notify_resume() from sched_mm_cid_after_execve() to the error
path of bprm_execve().

The call to rseq_set_notify_resume() from sched_mm_cid_after_execve() is
pointless in the success case, because rseq_execve() will clear the rseq
pointer before returning to userspace.

sched_mm_cid_after_execve() is called from both the success and error
paths of bprm_execve(). The call to rseq_set_notify_resume() is needed
on error because the mm_cid may have changed.

Also move the rseq_execve() to right after sched_mm_cid_after_execve()
in bprm_execve().

[ mingo: Merged to a recent upstream kernel, extended the changelog. ]

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250327132945.1558783-1-mathieu.desnoyers@efficios.com
2025-04-03 13:10:47 +02:00
Oleg Nesterov
975776841e sched/isolation: Make CONFIG_CPU_ISOLATION depend on CONFIG_SMP
kernel/sched/isolation.c obviously makes no sense without CONFIG_SMP, but
the Kconfig entry we have right now:

	config CPU_ISOLATION
		bool "CPU isolation"
		depends on SMP || COMPILE_TEST

allows the creation of pointless .config's which cause
build failures.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250330134955.GA7910@redhat.com

Closes: https://lore.kernel.org/oe-kbuild-all/202503260646.lrUqD3j5-lkp@intel.com/
2025-04-03 13:08:04 +02:00
Antoine Tenart
3a0a3ff659 net: decrease cached dst counters in dst_release
Upstream fix ac888d5886 ("net: do not delay dst_entries_add() in
dst_release()") moved decrementing the dst count from dst_destroy to
dst_release to avoid accessing already freed data in case of netns
dismantle. However in case CONFIG_DST_CACHE is enabled and OvS+tunnels
are used, this fix is incomplete as the same issue will be seen for
cached dsts:

  Unable to handle kernel paging request at virtual address ffff5aabf6b5c000
  Call trace:
   percpu_counter_add_batch+0x3c/0x160 (P)
   dst_release+0xec/0x108
   dst_cache_destroy+0x68/0xd8
   dst_destroy+0x13c/0x168
   dst_destroy_rcu+0x1c/0xb0
   rcu_do_batch+0x18c/0x7d0
   rcu_core+0x174/0x378
   rcu_core_si+0x18/0x30

Fix this by invalidating the cache, and thus decrementing cached dst
counters, in dst_release too.

Fixes: d71785ffc7 ("net: add dst_cache to ovs vxlan lwtunnel")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Link: https://patch.msgid.link/20250326173634.31096-1-atenart@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-04-03 13:05:07 +02:00
Christian Marangi
12e0b15b19 crypto: inside-secure/eip93 - acquire lock on eip93_put_descriptor hash
In the EIP93 HASH functions, the eip93_put_descriptor is called without
acquiring lock. This is problematic when multiple thread execute hash
operations.

Correctly acquire ring write lock on calling eip93_put_descriptor to
prevent concurrent access and mess with the ring pointers.

Fixes: 9739f5f93b ("crypto: eip93 - Add Inside Secure SafeXcel EIP-93 crypto engine support")
Reported-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2025-04-03 19:04:33 +08:00
Thomas Hellström
32cb8dc550 drm/xe: Fix xe_pt_stage_bind_walk kerneldoc
The structure was missing a proper kerneldoc header and once
that was added a number of typos and errors became obvious.
Fix those.

Reported-by: Lucas De Marchi <lucas.demarchi@intel.com>
Closes: https://lore.kernel.org/intel-xe/x53tcs5bjldw6lcorjemuheklxcmepdvr2u7lvt3hpqrzqoc4h@nsu6hs25taqj/
Fixes: b2d4b03b03 ("drm/xe: Make the PT code handle placement per PTE rather than per vma / range")
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250402122924.25526-1-thomas.hellstrom@linux.intel.com
2025-04-03 12:23:28 +02:00
Oliver Upton
26fbdf3692 KVM: arm64: Don't translate FAR if invalid/unsafe
Don't re-walk the page tables if an SEA occurred during the faulting
page table walk to avoid taking a fatal exception in the hyp.
Additionally, check that FAR_EL2 is valid for SEAs not taken on PTW
as the architecture doesn't guarantee it contains the fault VA.

Finally, fix up the rest of the abort path by checking for SEAs early
and bugging the VM if we get further along with an UNKNOWN fault IPA.

Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250402201725.2963645-4-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2025-04-03 00:28:51 -07:00
Oliver Upton
1cf3e126f1 arm64: Convert HPFAR_EL2 to sysreg table
Switch over to the typical sysreg table for HPFAR_EL2 as we're about to
start using more fields in the register.

Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250402201725.2963645-3-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2025-04-03 00:28:51 -07:00
Oliver Upton
fb8a3eba9c KVM: arm64: Only read HPFAR_EL2 when value is architecturally valid
KVM's logic for deciding when HPFAR_EL2 is UNKNOWN doesn't align with
the architecture. Most notably, KVM assumes HPFAR_EL2 contains the
faulting IPA even in the case of an SEA.

Align the logic with the architecture rather than attempting to
paraphrase it. Additionally, take the opportunity to improve the
language around ARM erratum #834220 such that it actually describes the
bug.

Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250402201725.2963645-2-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2025-04-03 00:28:51 -07:00
Dave Airlie
526da2436b amd-drm-next-6.15-2025-03-27:
amdgpu:
 - Guard against potential division by 0 in fan code
 - Zero RPM support for SMU 14.0.2
 - Properly handle SI and CIK support being disabled
 - PSR fixes
 - DML2 fixes
 - DP Link training fix
 - Vblank fixes
 - RAS fixes
 - Partitioning fix
 - SDMA fix
 - SMU 13.0.x fixes
 - Rom fetching fix
 - MES fixes
 - Queue reset fix
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQQgO5Idg2tXNTSZAr293/aFa7yZ2AUCZ+XxCgAKCRC93/aFa7yZ
 2P6MAP9D6MY6JH5RStUFDiIp3beNm7dQUfUcl2uXIJMU/SELXwEA2SjNuROeCtQj
 KNwPatatoQHxVnjQgxLOlKO86QoX8Qg=
 =ZCWI
 -----END PGP SIGNATURE-----

Merge tag 'amd-drm-next-6.15-2025-03-27' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-6.15-2025-03-27:

amdgpu:
- Guard against potential division by 0 in fan code
- Zero RPM support for SMU 14.0.2
- Properly handle SI and CIK support being disabled
- PSR fixes
- DML2 fixes
- DP Link training fix
- Vblank fixes
- RAS fixes
- Partitioning fix
- SDMA fix
- SMU 13.0.x fixes
- Rom fetching fix
- MES fixes
- Queue reset fix

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250328004749.3392457-1-alexander.deucher@amd.com
2025-04-03 15:53:37 +10:00
Dave Airlie
227bcf2c55 Driver Changes:
- Fix NULL pointer dereference on error path
 - Add missing HW workaround for BMG
 - Fix survivability mode not triggering
 - Fix build warning when DRM_FBDEV_EMULATION is not set
 -----BEGIN PGP SIGNATURE-----
 
 iQJNBAABCAA3FiEE6rM8lpABPHM5FqyDm6KlpjDL6lMFAmflamoZHGx1Y2FzLmRl
 bWFyY2hpQGludGVsLmNvbQAKCRCboqWmMMvqUzFcD/9uZkIvrmhZ7Yy0fyDlXu4K
 jIPN/IIzrk0Cn2+KBNC7oZOtVqwDblX8qk+n59u+wJHTKxmqrBfJZ1nEPRMfIRoY
 1dEdOmbl5E1fu4vWlKqFOmj69wTz80+NhHewMOV6vaNNPUo2Ub6MjrIYG+8Y+e7v
 WeoqTxxY7OEUKrygDjLxflG8yMr/faxoY2VhudtW88omENI7bOoH/fdJE6XUvoZI
 ACXvYBDImbe31KqSFTfJKKMrSN43hVzhaeoMi9bpt0Vyz5JNBvb4KfccD0vvzY9y
 2nErIyGaN4vc65kYibHhhEa76dlbMz0vTYAgXKTLz1TC/mVWsjHEh3ExOYSWFAbN
 ziN9wA8MN0zFnhqKDzatK4hjgR29hDxDG3rLdweGqvtNZqWc3f3AcJ5vvH6OacFb
 LGG7khi732msq6+cNAdJ+T9YK4OXWVMOX/woZ4iAMaexGv2i4pXYFqBlWpoTUrbd
 s7A9IHsZXNQ7gcUrJvzuGN9llJ0b5b2hRaL2bmeze0C+GeT5DEcSKo3wMBEnxqOc
 zSelYnBs5y5fUwU1vM4Ak5L2a1ZAIXFyeIcWahPRuIGOgANn7h7mWXEc8aBJefsM
 JALCI/yAZE0mTzfuOGq169p4ifUCJJmj9aL86SA/xjJTFqMZHLUXwpEP06LtZigV
 jra7pFnsQ2hRtkJHFZETfw==
 =uIRa
 -----END PGP SIGNATURE-----

Merge tag 'drm-xe-next-fixes-2025-03-27' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next

Driver Changes:
- Fix NULL pointer dereference on error path
- Add missing HW workaround for BMG
- Fix survivability mode not triggering
- Fix build warning when DRM_FBDEV_EMULATION is not set

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/vxy5kwdkzgp2u2umnyxv4ygslmdlvzjl22xotzxaw55dv7plpz@34miqxkbvggu
2025-04-03 15:52:39 +10:00
Dave Airlie
41ae768afb Merge tag 'drm-intel-next-fixes-2025-03-25' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
drm/i915 fixes for v6.15 merge window:
- Bounds check for scalers in DSC prefill latency computation
- Fix build by adding a missing include

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/878qota36x.fsf@intel.com
2025-04-03 15:52:15 +10:00
Dave Airlie
889f32b4d7 Short summary of fixes pull:
adp:
 - Fix error handling in plane setup
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEchf7rIzpz2NEoWjlaA3BHVMLeiMFAmflXdAACgkQaA3BHVML
 eiOlmggApoDBvX69OejLyjrhOXduxFv+UgDT7D0xsqumYnV7ILIA7Pi1k+GSqYgP
 3IW5xYyQ5l0Lngd4SMDYMMZEP9/jugq9Ujl69GJ4o8VHjWAOprZ/Dt70qXCu1qCR
 6Sc1s2qqP/D/I2reL+Mx7UO3tPGhr6aS1mMDgLzfkQfgAZNbOskP3lHgdPQe6Y5U
 ssSu4NKurol4+HxwwlZi+FPERi0Nfa44MaTJfNil0s7ihEHC7ih5i8G9XSJnIOWo
 cdr5+vQ9ElP0fmpi5K1qVd/aEIzuBAoYamkdLCN1GDl0wZquZWnlAfWElE+oRgMC
 dBgKG7cN+HeAO+7B5j6LRoYBRe0JJw==
 =MEAd
 -----END PGP SIGNATURE-----

Merge tag 'drm-misc-next-fixes-2025-03-27' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next

Short summary of fixes pull:

adp:
- Fix error handling in plane setup

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250327141835.GA96037@linux.fritz.box
2025-04-03 15:46:30 +10:00
Linus Torvalds
a2cc6ff5ec firewire updates for v6.15
A single commit has done to use the common helper function for on-stack
 trailing array to enqueue any isochronous packet by the requests from
 userspace application.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQQE66IEYNDXNBPeGKSsLtaWM8LwEwUCZ+knTAAKCRCsLtaWM8Lw
 ExWZAP9853LRvp74vdKWb83t1ZSD8upQQOgqFNxNyJRlstCO7AEAp+BJaV2aAzKp
 i3tLpW6EO0xF5XWCJHJw4KVQqX1ZkAM=
 =bDgW
 -----END PGP SIGNATURE-----

Merge tag 'firewire-updates-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394

Pull firewire update from Takashi Sakamoto:
 "A single commit to use the common helper function for on-stack
  trailing array to enqueue any isochronous packet by the requests
  from userspace applications"

* tag 'firewire-updates-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: core: avoid -Wflex-array-member-not-at-end warning
2025-04-02 22:41:04 -07:00
Yonghong Song
3f8ad18f81 selftests/bpf: Fix verifier_private_stack test failure
Several verifier_private_stack tests failed with latest bpf-next.
For example, for 'Private stack, single prog' subtest, the
jitted code:
  func #0:
  0:      f3 0f 1e fa                             endbr64
  4:      0f 1f 44 00 00                          nopl    (%rax,%rax)
  9:      0f 1f 00                                nopl    (%rax)
  c:      55                                      pushq   %rbp
  d:      48 89 e5                                movq    %rsp, %rbp
  10:     f3 0f 1e fa                             endbr64
  14:     49 b9 58 74 8a 8f 7d 60 00 00           movabsq $0x607d8f8a7458, %r9
  1e:     65 4c 03 0c 25 28 c0 48 87              addq    %gs:-0x78b73fd8, %r9
  27:     bf 2a 00 00 00                          movl    $0x2a, %edi
  2c:     49 89 b9 00 ff ff ff                    movq    %rdi, -0x100(%r9)
  33:     31 c0                                   xorl    %eax, %eax
  35:     c9                                      leave
  36:     e9 20 5d 0f e1                          jmp     0xffffffffe10f5d5b

The insn 'addq %gs:-0x78b73fd8, %r9' does not match the expected
regex 'addq %gs:0x{{.*}}, %r9' and this caused test failure.

Fix it by changing '%gs:0x{{.*}}' to '%gs:{{.*}}' to accommodate the
possible negative offset. A few other subtests are fixed in a similar way.

Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250331033828.365077-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2025-04-02 21:55:44 -07:00
Song Liu
14d84357a0 selftests/bpf: Fix verifier_bpf_fastcall test
Commit [1] moves percpu data on x86 from address 0x000... to address
0xfff...

Before [1]:

159020: 0000000000030700     0 OBJECT  GLOBAL DEFAULT   23 pcpu_hot

After [1]:

152602: ffffffff83a3e034     4 OBJECT  GLOBAL DEFAULT   35 pcpu_hot

As a result, verifier_bpf_fastcall tests should now expect a negative
value for pcpu_hot, IOW, the disassemble should show "r=" instead of
"w=".

Fix this in the test.

Note that, a later change created a new variable "cpu_number" for
bpf_get_smp_processor_id() [2]. The inlining logic is updated properly
as part of this change, so there is no need to fix anything on the
kernel side.

[1] commit 9d7de2aa8b ("x86/percpu/64: Use relative percpu offsets")
[2] commit 01c7bc5198 ("x86/smp: Move cpu number to percpu hot section")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20250328193124.808784-1-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2025-04-02 21:55:43 -07:00