New data types might be added later, so we don't want to disallow
unknown data types - that'll be a compatibility hassle later. Instead,
ignore them.
Reported-by: syzbot+3a290f5ff67ca3023834@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
More on the "full online self healing" project:
We now run most of the dirent <-> inode consistency checks, with repair
code, at runtime - the exact same check and repair code that fsck runs.
This will allow us to repair the "dirent points to inode that does not
point back" inconsistencies that have been popping up at runtime.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Prep work for calling bch2_check_dirent_target() from bch2_lookup().
- Add an inline wrapper, if the target and backpointer match we can skip
the function call.
- We don't (yet?) want to remove the dirent we did the lookup from (when
we find a directory or subvol with multiple valid dirents pointing to
it), we can defer on that until later. For now, add an "are we in
fsck?" parameter.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We're gradually running more and more fsck.c checks at runtime,
whereever applicable; when we do so they get moved out of fsck.c.
Next patch will call bch2_check_dirent_target() from bch2_lookup().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Replace these with proper private error codes, so that when we get an
error message we're not sifting through the entire codebase to see where
it came from.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The smp_rmb() guarantees that reads from reservations.counter
occur before accessing cur_entry_u64s. It's paired with the
atomic64_try_cmpxchg in journal_entry_open.
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Convert these to standard error codes, which means we can pass them
outside the journal code, they're easier to pass to tracepoints, etc.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
the discard option is special, because it's both a filesystem and a
device option.
When set at the filesytsem level, it's supposed to propagate to (if set
persistently via sysfs) or override (if non persistently as a mount
option) the devices - that now works correctly.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Other options can normally be set at runtime via sysfs, no reason for
this one not to be as well - it just doesn't support the degraded flags
argument this way, that requires the ioctl.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Device options now use the common code for sysfs, and can superblock
fields (in a struct bch_member).
This replaces BCH_DEV_OPT_SETTERS(), which was weird and easy to miss.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Previously, device options had their superblock option field listed
separately, which was weird and easy to miss when defining options.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
atomic64_read(&j->seq) - j->seq_write_started == JOURNAL_STATE_BUF_NR is
the condition in journal_entry_open where we return JOURNAL_ERR_max_open,
so journal_cur_seq(j) - seq == JOURNAL_STATE_BUF_NR means that the buf
corresponding to seq has started to write.
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Rebalance requires a not_extents iterator.
This wasn't hit before because all_snapshots disableds is_extents on
snapshots btrees - but has no effect on the reflink btree.
Reported-by: Maël Kerbiriou <mael.kerbiriou@free.fr>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This was missed - but it needs to be correct for the superblock recovery
tool that scans the start and end of the device for backup superblocks:
we don't want to pick up superblocks that belong to a different
partition that starts at a different offset.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Minor refactoring, so that bch2_sb_validate() can be used in the new
userspace superblock recovery tool.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
If we can't mount because of an incompatibility, print what's supported
and unsupported - to help solve PEBKAC issues.
Reported-by: Roland Vet <vet.roland@protonmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Just use sha256() instead of the clunky crypto API. This is much
simpler.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Since bcachefs does not access crc32c and crc64 through the crypto API,
there is no need to use module softdeps to ensure they are loaded.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This fixes another "rebalance spinning and doing no work" issue;
rebalance was reading extents it wanted to move, but then failing in
bch2_write() -> bch2_alloc_sectors_start() due to being unable to
allocate sufficient replicas.
This was triggered by a user playing with the durability settings, the
foreground device was an NVME device with durability=2, and originally
he'd set the background device to durability=2 as well, but changed it
back to 1 (the default) after seeing IO errors.
That meant that with replicas=2, we want to move data off the NVME
device which satisfies that constraint, but with a single durability=1
device on the background target there's no way to move the extent to
that target while satisfiying the "required replicas" constraint.
The solution for now is for bch2_data_update_init() to check for this,
and return an error - before kicking off the read.
bch2_data_update_init() already had two different checks for "will we be
able to write this extent", with partially duplicated code, so this
patch combines and improves that logic.
Additionally, we now always bail out and return an error if there's
insufficient space on the destination target. Previously, we only did
this for BCH_WRITE_alloc_nowait moves, because it might be the case that
copygc just needs to free up space on the destination target.
But we really shouldn't kick off a move if the destination is full, we
can't currently distinguish between "really full" and "just need to wait
for copygc", and if we are going to wait on copygc it'd be better to do
that before kicking off the move.
This will additionally fix "rebalance spinning" issues caused by a
filesystem that has more data than can fit in background_target - which
is a valid scenario, since we don't exclude foreground/cache devices
when calculating filesystem capacity.
Reported-by: Maël Kerbiriou <mael.kerbiriou@free.fr>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Now there are 16 journal buffers, 8 is too small to be enough.
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Next patch will be checking if the extent we're reading from matches the
IO failure we saw before marking the failure.
For this to work, __bch2_read() needs to take the same transaction
context that bch2_rbio_retry() uses to do that check.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Read flags are codepath dependent and change as they're passed around,
while the fields in rbio._state are mostly fixed properties of that
particular object.
Losing track of BCH_READ_data_update would be bad, and previously it was
not obvious if it was always correctly set in the rbio, so this is a
safety cleanup.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Merge cpuidle updates for 6.15-rc5, including a menu governor update
that is reported to improve some benchmark results quite significantly:
- Update the handling of the most recent idle intervals in the menu
cpuidle governor to prevent useful information from being discarded
by it in some cases and improve the prediction accuracy (Rafael
Wysocki).
- Make it possible to tell the intel_idle driver to ignore its built-in
table of idle states for the given processor, clean up the handling
of auto-demotion disabling on Baytrail and Cherrytrail chips in it,
and update its MAINTAINERS entry (David Arcari, Artem Bityutskiy,
Rafael Wysocki).
- Make some cpuidle drivers use for_each_present_cpu() instead of
for_each_possible_cpu() during initialization to avoid issues
occurring when nosmp or maxcpus=0 are used (Jacky Bai).
* pm-cpuidle:
cpuidle: Init cpuidle only for present CPUs
cpuidle: intel_idle: Update MAINTAINERS
intel_idle: introduce 'no_native' module parameter
cpuidle: menu: Update documentation after get_typical_interval() changes
cpuidle: menu: Avoid discarding useful information
cpuidle: menu: Eliminate outliers on both ends of the sample set
cpuidle: menu: Tweak threshold use in get_typical_interval()
cpuidle: menu: Use one loop for average and variance computations
cpuidle: menu: Drop a redundant local variable
intel_idle: clean up BYT/CHT auto demotion disable
Merge cpufreq updates for 6.15-rc1:
- Manage sysfs attributes and boost frequencies efficiently from
cpufreq core to reduce boilerplate code from drivers (Viresh Kumar).
- Minor cleanups to cpufreq drivers (Aaron Kling, Benjamin Schneider,
Dhananjay Ugwekar, Imran Shaik, and zuoqian).
- Migrate some cpufreq drivers to using for_each_present_cpu() (Jacky
Bai).
- cpufreq-qcom-hw DT binding fixes (Krzysztof Kozlowski).
- Use str_enable_disable() helper in cpufreq_online() (Lifeng Zheng).
- Optimize the amd-pstate driver to avoid cases where call paths end
up calling the same writes multiple times and needlessly caching
variables through code reorganization, locking overhaul and tracing
adjustments (Mario Limonciello, Dhananjay Ugwekar).
- Make it possible to avoid enabling capacity-aware scheduling (CAS) in
the intel_pstate driver and relocate a check for out-of-band (OOB)
platform handling in it to make it detect OOB before checking HWP
availability (Rafael Wysocki).
- Fix dbs_update() to avoid inadvertent conversions of negative integer
values to unsigned int which causes CPU frequency selection to be
inaccurate in some cases when the "conservative" cpufreq governor is
in use (Jie Zhan).
* pm-cpufreq: (91 commits)
dt-bindings: cpufreq: cpufreq-qcom-hw: Narrow properties on SDX75, SA8775p and SM8650
dt-bindings: cpufreq: cpufreq-qcom-hw: Drop redundant minItems:1
dt-bindings: cpufreq: cpufreq-qcom-hw: Add missing constraint for interrupt-names
dt-bindings: cpufreq: cpufreq-qcom-hw: Add QCS8300 compatible
cpufreq: Init cpufreq only for present CPUs
cpufreq: tegra186: Share policy per cluster
cpufreq/amd-pstate: Drop actions in amd_pstate_epp_cpu_offline()
cpufreq/amd-pstate: Stop caching EPP
cpufreq/amd-pstate: Rework CPPC enabling
cpufreq/amd-pstate: Drop debug statements for policy setting
cpufreq/amd-pstate: Update cppc_req_cached for shared mem EPP writes
cpufreq/amd-pstate: Move all EPP tracing into *_update_perf and *_set_epp functions
cpufreq/amd-pstate: Cache CPPC request in shared mem case too
cpufreq/amd-pstate: Replace all AMD_CPPC_* macros with masks
cpufreq/amd-pstate-ut: Adjust variable scope
cpufreq/amd-pstate-ut: Run on all of the correct CPUs
cpufreq/amd-pstate-ut: Drop SUCCESS and FAIL enums
cpufreq/amd-pstate-ut: Allow lowest nonlinear and lowest to be the same
cpufreq/amd-pstate-ut: Use _free macro to free put policy
cpufreq/amd-pstate: Drop `cppc_cap1_cached`
...
Merge thermal core updates and miscellaneous updates of the thermal
control subsystem for 6.15-rc1:
- Delay exposing thermal zone sysfs interface to prevent user space
from accessing thermal zones that have not been completely
initialized yet (Lucas De Marchi).
- Fix a spelling mistake in a comment in the thermal core (Colin Ian
King).
- Use kcalloc() instead of kzalloc() in some places in the thermal
control subsystem (Lukasz Luba, Ethan Carter Edwards).
- Clean up variable initialization in int340x_thermal_zone_add()
(Christophe JAILLET).
* thermal-core:
thermal: core: Delay exposing sysfs interface
thermal: core: Fix spelling mistake "Occurences" -> "Occurrences"
* thermal-misc:
thermal: intel: Clean up zone_trips[] initialization in int340x_thermal_zone_add()
thermal: hisi: Use kcalloc() instead of kzalloc() with multiplication
thermal: int340x: Use kcalloc() instead of kzalloc() with multiplication
thermal: k3_j72xx_bandgap: Use kcalloc() instead of kzalloc()
thermal/of: Use kcalloc() instead of kzalloc() with multiplication
thermal/debugfs: replace kzalloc() with kcalloc() in thermal_debug_tz_add()
Merge an ACPI CPPC update, ACPI platform-profile driver updates, an ACPI
APEI update and a MAINTAINERS update related to ACPI for 6.15-rc1:
- Add a missing header file include to the x86 arch CPPC code (Mario
Limonciello).
- Rework the sysfs attributes implementation in the ACPI platform-profile
driver and improve the unregistration code in it (Nathan Chancellor,
Kurt Borja).
- Prevent the ACPI HED driver from being built as a module and change
its initcall level to subsys_initcall to avoid initialization ordering
issues related to it (Xiaofei Tan).
- Update a maintainer email address in the ACPI PMIC entry in
MAINTAINERS (Mika Westerberg).
* acpi-x86:
x86/ACPI: CPPC: Add missing include
* acpi-platform-profile:
ACPI: platform_profile: Improve platform_profile_unregister()
ACPI: platform-profile: Fix CFI violation when accessing sysfs files
* acpi-apei:
ACPI: HED: Always initialize before evged
* acpi-misc:
MAINTAINERS: Use my kernel.org address for ACPI PMIC work
There are two panel_replay scenarios fbc wa need to be aware of,
panel replay with and without selective update capability.
Panel replay without selective update don't have any fbc wa.
So keep the fbc psr1 wa as it is.
The current fbc psr2 wa is mainly about selective fetch and we
need to apply the fbc wa if selective fetch is on - irrespective
of panel replay. Hence we can't exclude panel replay from the
fbc psr2 wa.
v1: keep panel_replay exclusion in PSR1 case (Jouni)
Patch description updated
Bspec: 66624, 50442
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250321094529.197397-3-vinod.govindapillai@intel.com
FBC was disabled in case PSR2 selective update in display 12 to
14 as part of a wa. From xe2lpd onwards there is a logic to be
implemented to decide between FBC and selective update. Until
that logic is implemented keep FBC disabled in case selective
update is enabled.
v1: updated patch description and some explanation and todo
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250321094529.197397-2-vinod.govindapillai@intel.com
Merge five ACPI driver updates for 6.15-rc1:
- Use the str_on_off() helper function instead of hard-coded strings in
the ACPI power resources handling code (Thorsten Blum).
- Add fan speed reporting for ACPI fans that have _FST, but otherwise
do not support the entire ACPI 4 fan interface (Joshua Grisham).
- Fix a stale comment regarding trip points in acpi_thermal_add() that
diverged from the commented code after removing _CRT evaluation from
acpi_thermal_get_trip_points() (xueqin Luo).
- Make ACPI button driver also subscribe to system events (Mario
Limonciello).
- Use the str_yes_no() helper function instead of hard-coded strings in
the ACPI backlight (video) driver (Thorsten Blum).
* acpi-power:
ACPI: power: Use str_on_off() helper function
* acpi-fan:
ACPI: fan: Add fan speed reporting for fans with only _FST
* acpi-thermal:
ACPI: thermal: Fix stale comment regarding trip points
* acpi-button:
ACPI: button: Install notifier for system events as well
* acpi-video:
ACPI: video: Use str_yes_no() helper in acpi_video_bus_add()
Binding AX25 socket by using the autobind feature leads to memory leaks
in ax25_connect() and also refcount leaks in ax25_release(). Memory
leak was detected with kmemleak:
================================================================
unreferenced object 0xffff8880253cd680 (size 96):
backtrace:
__kmalloc_node_track_caller_noprof (./include/linux/kmemleak.h:43)
kmemdup_noprof (mm/util.c:136)
ax25_rt_autobind (net/ax25/ax25_route.c:428)
ax25_connect (net/ax25/af_ax25.c:1282)
__sys_connect_file (net/socket.c:2045)
__sys_connect (net/socket.c:2064)
__x64_sys_connect (net/socket.c:2067)
do_syscall_64 (arch/x86/entry/common.c:52 arch/x86/entry/common.c:83)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
================================================================
When socket is bound, refcounts must be incremented the way it is done
in ax25_bind() and ax25_setsockopt() (SO_BINDTODEVICE). In case of
autobind, the refcounts are not incremented.
This bug leads to the following issue reported by Syzkaller:
================================================================
ax25_connect(): syz-executor318 uses autobind, please contact jreuter@yaina.de
------------[ cut here ]------------
refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 0 PID: 5317 at lib/refcount.c:31 refcount_warn_saturate+0xfa/0x1d0 lib/refcount.c:31
Modules linked in:
CPU: 0 UID: 0 PID: 5317 Comm: syz-executor318 Not tainted 6.14.0-rc4-syzkaller-00278-gece144f151ac #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:refcount_warn_saturate+0xfa/0x1d0 lib/refcount.c:31
...
Call Trace:
<TASK>
__refcount_dec include/linux/refcount.h:336 [inline]
refcount_dec include/linux/refcount.h:351 [inline]
ref_tracker_free+0x6af/0x7e0 lib/ref_tracker.c:236
netdev_tracker_free include/linux/netdevice.h:4302 [inline]
netdev_put include/linux/netdevice.h:4319 [inline]
ax25_release+0x368/0x960 net/ax25/af_ax25.c:1080
__sock_release net/socket.c:647 [inline]
sock_close+0xbc/0x240 net/socket.c:1398
__fput+0x3e9/0x9f0 fs/file_table.c:464
__do_sys_close fs/open.c:1580 [inline]
__se_sys_close fs/open.c:1565 [inline]
__x64_sys_close+0x7f/0x110 fs/open.c:1565
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
</TASK>
================================================================
Considering the issues above and the comments left in the code that say:
"check if we can remove this feature. It is broken."; "autobinding in this
may or may not work"; - it is better to completely remove this feature than
to fix it because it is broken and leads to various kinds of memory bugs.
Now calling connect() without first binding socket will result in an
error (-EINVAL). Userspace software that relies on the autobind feature
might get broken. However, this feature does not seem widely used with
this specific driver as it was not reliable at any point of time, and it
is already broken anyway. E.g. ax25-tools and ax25-apps packages for
popular distributions do not use the autobind feature for AF_AX25.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: syzbot+33841dc6aa3e1d86b78a@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=33841dc6aa3e1d86b78a
Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a basic test for checking whether scheduler respects the configured
credit limit.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Philipp Stanner <phasta@kernel.org>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250324092633.49746-7-tvrtko.ursulin@igalia.com
Add a basic test for exercising modifying the entities scheduler list at
runtime.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Philipp Stanner <phasta@kernel.org>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250324092633.49746-6-tvrtko.ursulin@igalia.com
Add some basic tests for exercising entity priority handling.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Philipp Stanner <phasta@kernel.org>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250324092633.49746-5-tvrtko.ursulin@igalia.com
Add a very simple timeout test which submits a single job and verifies
that the timeout handling will run if the backend failed to complete the
job in time.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Philipp Stanner <phasta@kernel.org>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250324092633.49746-4-tvrtko.ursulin@igalia.com
Implement a mock scheduler backend and add some basic test to exercise the
core scheduler code paths.
Mock backend (kind of like a very simple mock GPU) can either process jobs
by tests manually advancing the "timeline" job at a time, or alternatively
jobs can be configured with a time duration in which case they get
completed asynchronously from the unit test code.
Core scheduler classes are subclassed to support this mock implementation.
The tests added are just a few simple submission patterns.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Suggested-by: Philipp Stanner <phasta@kernel.org>
Cc: Christian König <christian.koenig@amd.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Philipp Stanner <phasta@kernel.org>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250324092633.49746-3-tvrtko.ursulin@igalia.com
Move some options out into a new debug specific kconfig file in order to
make things a bit cleaner.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Philipp Stanner <phasta@kernel.org>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250324092633.49746-2-tvrtko.ursulin@igalia.com
It seems there really exists the need for a simple sysfs interface that
can be easily used from minimal initramfs images that don't contain much
more than busybox. However the current interface poses a challenge to
the removal of global GPIO numberspace. Add an item that tracks
extending the existing ABI with a per-chip export/unexport attribute
pair.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250321-gpio-todo-updates-v1-6-7b38f07110ee@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>