Add an item tracking the treewide conversion of GPIO drivers to using
the new line value setter callbacks in struct gpio_chip instead of the
old ones that don't allow drivers to signal failures to callers.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250321-gpio-todo-updates-v1-5-7b38f07110ee@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
While there are surely some arguments in favor of integrating the GPIO
and pinctrl subsystems into one, I believe this is not the right
approach.
The GPIO subsystem uses intricate locking with SRCU to handle the fact
that both consumers and providers may run in different contexts.
Pin-controller drivers are always meant to run in process context. This
alone is a huge obstacle to any attempt at integration as evident by
many problems we already encountered during the hotplug rework.
The current glue code is pretty minimal and for most part already allows
GPIO controllers to query pinctrl about the information they need.
I suggest to drop this task and keep the subsystems separate even if
many pin-controllers implement GPIO functionality in addition to pin
functions.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250321-gpio-todo-updates-v1-3-7b38f07110ee@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The removal of linux/gpio.h is already tracked by the item about
converting drivers to using the descriptor-based API. Remove the
duplicate.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250321-gpio-todo-updates-v1-2-7b38f07110ee@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Failing to set up connector polling is not significant enough to
fail device probing. Print a warning and return nothing from the
init helper.
This only affects the managed init function. The unmanaged init
already never fails with an error.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250303145604.62962-4-tzimmermann@suse.de
Disconnecting a DisplayLink device results in the following kernel
error messages
[ 93.041748] [drm:udl_urb_completion [udl]] *ERROR* udl_urb_completion - nonzero write bulk status received: -115
[ 93.055299] [drm:udl_submit_urb [udl]] *ERROR* usb_submit_urb error fffffffe
[ 93.065363] [drm:udl_urb_completion [udl]] *ERROR* udl_urb_completion - nonzero write bulk status received: -115
[ 93.078207] [drm:udl_submit_urb [udl]] *ERROR* usb_submit_urb error fffffffe
coming from KMS poll helpers. Shutting down poll helpers runs them
one final time when the USB device is already gone.
Run drm_dev_unplug() first in udl's USB disconnect handler. Udl's
polling code already handles disconnects gracefully if the device has
been marked as unplugged.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: b1a981bd55 ("drm/udl: drop drm_driver.release hook")
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.8+
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250303145604.62962-2-tzimmermann@suse.de
Starting from MTL we don't have a platform agnostic way to validate
DC6 state due to dc6 counter has been removed to validate DC state.
The goal is to validate that the display HW can reach the DC6 power
state. There is no HW DC6 residency counter (and there wasn't such
a counter earlier either), so an alternative way is required. According
to the HW team the display driver has programmed everything correctly in
order to allow the DC6 power state if the DC5 power state is reached
(indicated by the HW DC5 residency counter incrementing) and DC6 is
enabled by the driver.
Driver could take a snapshot of the DC5 residency counter right
after it enables DC6 (dc5_residency_start) and increment the SW
DC6 residency counter right before it disables DC6 or when user space
reads the DC6 counter. So the driver would update the counter at these
two points in the following way:
dc6_residency_counter += dc5_current_count - dc5_start_count
v2: Update the discription. (Imre)
Read dc5 count during dc6 enable and disable then and update
dc6 residency counter. (Imre)
Remove variable from dmc structure. (Jani)
Updated the subject title.
v3: Add i915_power_domains lock to updated dc6 count in debugfs. (Imre)
Use flags to check dc6 enable/disable states. (Imre)
Move the display version check and counter read/update to
a helper. (Imre)
Resize the variable length. (Rodrigo)
Use old dc6 debugfs entry for every platform. (Rodrigo)
v4: Remove superfluous whitespace. (Jani)
Read DMC registers in intel_dmc.c (Jani)
Rename dc6_en_dis to dc6_enabled and change its type to bool. (Jani)
Rename update_dc6_count and move it to intel_dmc.c (Jani)
Rename dc6_en_dis to start_tracking. (Imre)
Have lock for dc6 state read aswelll. (Imre)
Keep the existing way print 'DC5 -> DC6 count' along with
new 'DC6 Allowed Count' print. (Imre)
Add counters in intel_dmc struct. (Imre)
Have interface to return dc6 allowed count. (Imre)
Rename dc6_count to dc6_allowed_count. (Rodrigo)
v5: Rename counters and move in to dc6_allowed structure. (Imre)
Order declaration lines in decreasing line length. (Imre)
Update start_tacking logic. (Imre)
Move get couner inside lock and DISPLAY_VER code to helper. (Imre)
v6: Change intel_dmc_get_dc6_allowed_count return type to bool. (Imre)
Update debugfs print to better allien with old print. (Imre)
Remove braces at if/else for signle line statements. (Imre)
v7: Remove in line variable declaration. (Imre)
v8: Rebase the changes.
Signed-off-by: Mohammed Thasleem <mohammed.thasleem@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250321123707.287745-1-mohammed.thasleem@intel.com
Currently, vrr.enable is intended only for variable refresh rate timings.
At this point, we do not set fixed refresh rate timings, but the GOP can,
which creates a problem during the readback of vrr.enable.
The GOP enables the VRR timing generator with fixed timings, while the
driver only recognizes the VRR timing generator as enabled with
variable timings. This discrepancy causes an issue due to the
fixed refresh rate check during readback. Since the VRR timing generator
is enabled and we do not support fixed timings, the readback should set
vrr.enable so that the driver can disable the VRR timing generator.
However, the current check does not allow this.
Therefore, remove the fixed refresh rate check during readback.
Fixes: 27217f9d18 ("drm/i915/vrr: Track vrr.enable only for variable timing")
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250322044345.3827137-3-ankit.k.nautiyal@intel.com
Add fixed refresh rate mode in crtc_state dump.
VRR Timing Generator is running in fixed refresh rate mode when
vrr.vmin = vrr.vmax = vrr.flipline.
v2: s/fixed_rr/fixed rr for consistency with the other stuff. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250322044345.3827137-2-ankit.k.nautiyal@intel.com
For flexible routing, eint will be divided into 5 bases,
and it will obtain the operation address through the pins array.
Signed-off-by: Hao Chang <ot_chhao.chang@mediatek.com>
Signed-off-by: Qingliang Li <qingliang.li@mediatek.com>
Link: https://lore.kernel.org/20250322035307.4811-2-ot_chhao.chang@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The function worker_thread() is programmed in a way that roughly
doubles the number of expectable context switches, because it enforces
blocking reads:
Performance counter stats for 'perf bench sched pipe':
2,000,004 context-switches
11.859548321 seconds time elapsed
0.674871000 seconds user
8.076890000 seconds sys
The result of this behavior is that the blocking reads by far dominate
the performance analysis of 'perf bench sched pipe':
Samples: 78K of event 'cycles:P', Event count (approx.): 27964965844
Overhead Command Shared Object Symbol
25.28% sched-pipe [kernel.kallsyms] [k] read_hpet
8.11% sched-pipe [kernel.kallsyms] [k] retbleed_untrain_ret
2.82% sched-pipe [kernel.kallsyms] [k] pipe_write
From the code, it is unclear if that behavior is wanted but the log
says that at least Ingo Molnar aims to mimic lmbench's lat_ctx, that
doesn't handle the pipe ends that way
(https://sourceforge.net/p/lmbench/code/HEAD/tree/trunk/lmbench2/src/lat_ctx.c)
Fix worker_thread() by always first feeding the write ends of the pipes
and then trying to read.
This roughly halves the context switches and runtime of pure
'perf bench sched pipe':
Performance counter stats for 'perf bench sched pipe':
1,005,770 context-switches
6.033448041 seconds time elapsed
0.423142000 seconds user
4.519829000 seconds sys
And the blocking reads do no longer dominate the analysis at the above
extreme:
Samples: 40K of event 'cycles:P', Event count (approx.): 14309364879
Overhead Command Shared Object Symbol
12.20% sched-pipe [kernel.kallsyms] [k] read_hpet
9.23% sched-pipe [kernel.kallsyms] [k] retbleed_untrain_ret
3.68% sched-pipe [kernel.kallsyms] [k] pipe_write
Signed-off-by: Dirk Gouders <dirk@gouders.net>
Acked-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250323140316.19027-2-dirk@gouders.net
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Commit 54f9aa1092 ("tools/perf/powerpc/util: Add support to
handle compatible mode PVR for perf json events") introduced
to select proper JSON events in case of compat mode using
auxiliary vector. But this caused a compilation error in ppc64
Big Endian.
arch/powerpc/util/header.c: In function 'is_compat_mode':
arch/powerpc/util/header.c:20:21: error: cast to pointer from
integer of different size [-Werror=int-to-pointer-cast]
20 | if (!strcmp((char *)platform, (char *)base_platform))
| ^
arch/powerpc/util/header.c:20:39: error: cast to pointer from
integer of different size [-Werror=int-to-pointer-cast]
20 | if (!strcmp((char *)platform, (char *)base_platform))
|
Commit saved the getauxval(AT_BASE_PLATFORM) and getauxval(AT_PLATFORM)
return values in u64 which causes the compilation error.
Patch fixes this issue by changing u64 to "unsigned long".
Fixes: 54f9aa1092 ("tools/perf/powerpc/util: Add support to handle compatible mode PVR for perf json events")
Signed-off-by: Likhitha Korrapati <likhitha@linux.ibm.com>
Reviewed-by: Athira Rajeev <atrajeev@linux.ibm.com>
Link: https://lore.kernel.org/r/20250321100726.699956-1-likhitha@linux.ibm.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
When enabling the libperl feature the build uses perl's build flags
(ccopts) but filters out various flags, e.g. for LTO.
While this is conceptually correct, it is insufficient in practice,
since only "-flto=auto" is filtered out. When perl itself is built with
"-flto" this can cause parts of perf being built with LTO and others
without, giving exciting build errors like e.g.:
../tools/perf/pmu-events/pmu-events.c:72851:(.text+0xb79): undefined
reference to `strcmp_cpuid_str' collect2: error: ld returned 1 exit status
Fix this by filtering all matching flag values of -flto{=n,auto,..}.
Signed-off-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Link: https://lore.kernel.org/r/20250321082038.27901-2-holger@applied-asynchrony.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Some DSI panel vendors end up hardcoding PPS params because of which
it does not listen to the params sent from the source. We use the
default config tables for DSI panels when using DSC 1.1 rather than
calculate our own rc parameters.
--v2
-Use intel_crtc_has_type [Jani]
--v4
-Use a function to check Mipi dsi dsc 1.1 condition [Ankit]
-Add documentation for using this condition [Ankit]
-Rebase
--v5
-Pass only the crtc_state [Jani]
-Fixup the comment [Jani]
-Check for dsc major version [Jani]
-Use co-developed-by tag [Jani]
--v6
-Add more definition of the issue and solution in the comment [Ankit]
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13719
Co-developed-by: William Tseng <william.tseng@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228152531.403026-1-suraj.kandpal@intel.com
WARNING: unmet direct dependencies detected for FB_IOMEM_HELPERS
Depends on [n]: HAS_IOMEM [=y] && FB_CORE [=n]
Selected by [m]:
- DRM_XE_DISPLAY [=y] && HAS_IOMEM [=y] && DRM [=m] && DRM_XE [=m] && DRM_XE [=m]=m [=m] && HAS_IOPORT [=y]
DRM_XE_DISPLAY requires FB_IOMEM_HELPERS, but the dependency FB_CORE is
missing, selecting FB_IOMEM_HELPERS if DRM_FBDEV_EMULATION is set as
other drm drivers.
Fixes: 44e694958b ("drm/xe/display: Implement display support")
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250323114103.1960511-1-yuehaibing@huawei.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Do not emit `#[link_section = ".modinfo"]` on macOS (i.e. when building
userspace tests); .modinfo is not a legal section specifier in mach-o.
Before this change tests failed to compile:
---- ../rust/macros/lib.rs - module (line 66) stdout ----
rustc-LLVM ERROR: Global variable '_ZN8rust_out13__module_init13__module_init27__MY_DEVICE_DRIVER_MODULE_017h141f80536770e0d4E' has an invalid section specifier '.modinfo': mach-o section specifier requires a segment and section separated by a comma.
Couldn't compile the test.
---- ../rust/macros/lib.rs - module (line 33) stdout ----
rustc-LLVM ERROR: Global variable '_ZN8rust_out13__module_init13__module_init20__MY_KERNEL_MODULE_017h5d79189564b41e07E' has an invalid section specifier '.modinfo': mach-o section specifier requires a segment and section separated by a comma.
Couldn't compile the test.
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Link: https://lore.kernel.org/r/20250210-macros-section-v2-1-3bb9ff44b969@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Replace all occurrences (one) of `addr_of_mut!(place)` with
`&raw mut place`.
This will allow us to reduce macro complexity, and improve consistency
with existing reference syntax as `&raw mut` is similar to `&mut` making
it fit more naturally with other existing code.
Suggested-by: Benno Lossin <benno.lossin@proton.me>
Link: https://github.com/Rust-for-Linux/linux/issues/1148
Signed-off-by: Antonio Hickey <contact@antoniohickey.com>
Acked-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20250320020740.1631171-17-contact@antoniohickey.com
[ Reworded slightly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Convert the event_hash array in trace_output.c to use the generic
hashtable implementation from hashtable.h instead of the manually
implemented hash table.
This simplifies the code and makes it more maintainable by using the
standard hashtable API defined in hashtable.h.
Rename EVENT_HASHSIZE to EVENT_HASH_BITS to properly reflect its new
meaning as the number of bits for the hashtable size.
Link: https://lore.kernel.org/20250323132800.3010783-1-sashal@kernel.org
Link: https://lore.kernel.org/20250319190545.3058319-1-sashal@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Since Rust 1.82.0 the `raw_ref_op` feature is stable [1].
By enabling this feature we can use `&raw const place` and
`&raw mut place` instead of using `addr_of!(place)` and
`addr_of_mut!(place)` macros.
Allowing us to reduce macro complexity, and improve consistency
with existing reference syntax as `&raw const`, `&raw mut` are
similar to `&`, `&mut` making it fit more naturally with other
existing code.
Suggested-by: Benno Lossin <benno.lossin@proton.me>
Link: https://github.com/Rust-for-Linux/linux/issues/1148
Link: https://blog.rust-lang.org/2024/10/17/Rust-1.82.0.html#native-syntax-for-creating-a-raw-pointer [1]
Signed-off-by: Antonio Hickey <contact@antoniohickey.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Tamir Duberstein <tamird@gmail.com>
Link: https://lore.kernel.org/r/20250320020740.1631171-2-contact@antoniohickey.com
[ Removed dashed line change as discussed. Added Link to the explanation
of the feature in the Rust 1.82.0 release blog post. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Correctly refer to `reserve` rather than `try_reserve` in a comment. This
comment has been incorrect since inception in commit 1b580e7b9b ("rust:
uaccess: add userspace pointers").
Fixes: 1b580e7b9b ("rust: uaccess: add userspace pointers")
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Charalampos Mitrodimas <charmitro@posteo.net>
Link: https://lore.kernel.org/r/20250317-uaccess-typo-reserve-v1-1-bbfcb45121f3@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Several safety comments in the RBTree implementation still refer to
"Box::from_raw" and "Box::into_raw", but the code actually uses KBox.
These comments were not updated when the implementation transitioned
from using Box to KBox.
Fixes: 8373147ce4 ("rust: treewide: switch to our kernel `Box` type")
Signed-off-by: Charalampos Mitrodimas <charmitro@posteo.net>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250315-rbtree-comment-fixes-v1-1-51f72c420ff0@posteo.net
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
In addition to the standard reset controller, V3D 7.x requires configuring
the V3D_SMS registers for proper power on/off and reset. Add the new
registers to `v3d_regs.h` and ensure they are properly configured during
device probing, removal, and reset.
This change fixes GPU reset issues on the Raspberry Pi 5 (BCM2712).
Without exposing these registers, a GPU reset causes the GPU to hang,
stopping any further job execution and freezing the desktop GUI. The same
issue occurs when unloading and loading the v3d driver.
Link: https://github.com/raspberrypi/linux/issues/6660
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250317-v3d-gpu-reset-fixes-v6-5-f3ee7717ed17@igalia.com
As established in commit 89d04995f7 ("MAINTAINERS: Drop Emma Anholt
from all M lines."), Emma is no longer active in the Linux kernel and
dropped the V3D maintainership. Therefore, remove Emma as one of the DT
maintainers and add the current V3D driver maintainer.
Acked-by: Emma Anholt <emma@anholt.net>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250317-v3d-gpu-reset-fixes-v6-4-f3ee7717ed17@igalia.com
V3D 7.1 exposes a new register block, called V3D_SMS. As BCM2712 has a
V3D 7.1 core, add a new register item to its compatible. Similar to the
GCA, which is specific for V3D 3.3, SMS should only be added for V3D 7.1
variants (such as brcm,2712-v3d).
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250317-v3d-gpu-reset-fixes-v6-3-f3ee7717ed17@igalia.com
In order to enforce per-SoC register rules, add per-compatible
restrictions. For example, V3D 3.3 (used in brcm,7268-v3d) has a cache
controller (GCA), which is not present in other V3D generations. Declaring
these differences helps ensure the DTB accurately reflect the hardware
design.
The example was using an incorrect order for the register names. This
commit corrects that by enforcing the order established in the register
items description.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250317-v3d-gpu-reset-fixes-v6-2-f3ee7717ed17@igalia.com
The V3D driver currently determines the GPU tech version (33, 41...)
by reading a register. This approach has worked so far since this
information wasn’t needed before powering on the GPU.
V3D 7.1 introduces new registers that must be written to power on the
GPU, requiring us to know the V3D version beforehand. To address this,
associate each supported SoC with the corresponding VideoCore GPU version
as part of the device data.
To prevent possible mistakes, add an assertion to verify that the version
specified in the device data matches the one reported by the hardware.
If there is a mismatch, the kernel will trigger a warning.
With the goal of maintaining consistency around the driver, use `enum
v3d_gen` to assign values to `v3d->ver` and for comparisons with other
V3D generations. Note that all mentions of unsupported or non-existing V3D
generations (such as V3D 4.0) were removed by this commit and replaced
with supported generations without functional changes.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250317-v3d-gpu-reset-fixes-v6-1-f3ee7717ed17@igalia.com
When BIOS neglects to assign bus numbers to PCI bridges, the kernel
attempts to correct that during PCI device enumeration. If it runs out
of bus numbers, no pci_bus is allocated and the "subordinate" pointer in
the bridge's pci_dev remains NULL.
The PCIe bandwidth controller erroneously does not check for a NULL
subordinate pointer and dereferences it on probe.
Bandwidth control of unusable devices below the bridge is of questionable
utility, so simply error out instead. This mirrors what PCIe hotplug does
since commit 62e4492c30 ("PCI: Prevent NULL dereference during pciehp
probe").
The PCI core emits a message with KERN_INFO severity if it has run out of
bus numbers. PCIe hotplug emits an additional message with KERN_ERR
severity to inform the user that hotplug functionality is disabled at the
bridge. A similar message for bandwidth control does not seem merited,
given that its only purpose so far is to expose an up-to-date link speed
in sysfs and throttle the link speed on certain laptops with limited
Thermal Design Power. So error out silently.
User-visible messages:
pci 0000:16:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[...]
pci_bus 0000:45: busn_res: [bus 45-74] end is updated to 74
pci 0000:16:02.0: devices behind bridge are unusable because [bus 45-74] cannot be assigned for them
[...]
pcieport 0000:16:02.0: pciehp: Hotplug bridge without secondary bus, ignoring
[...]
BUG: kernel NULL pointer dereference
RIP: pcie_update_link_speed
pcie_bwnotif_enable
pcie_bwnotif_probe
pcie_port_probe_service
really_probe
Fixes: 665745f274 ("PCI/bwctrl: Re-add BW notification portdrv as PCIe BW controller")
Reported-by: Wouter Bijlsma <wouter@wouterbijlsma.nl>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219906
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Tested-by: Wouter Bijlsma <wouter@wouterbijlsma.nl>
Cc: stable@vger.kernel.org # v6.13+
Link: https://lore.kernel.org/r/3b6c8d973aedc48860640a9d75d20528336f1f3c.1742669372.git.lukas@wunner.de
Update the CPM5 check to include CPM5_HOST1 variant. Previously, only
CPM5 was considered when mapping the "cpm_csr" register.
With this change, CPM5_HOST1 is also supported, ensuring proper
resource mapping for this variant.
Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@amd.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://lore.kernel.org/r/20250317124136.1317723-1-thippeswamy.havalige@amd.com
Don't populate the const read-only arrays "data" and "regs" on the
stack at run time, instead make them static.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
[kwilczynski: commit log, wrap overly long line to 80 columns]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://lore.kernel.org/r/20250317143456.477901-1-colin.i.king@gmail.com
Currently, using synth_event_delete() will fail if the event is being
used (tracing in progress), but that is normally done in the module exit
function. At that stage, failing is problematic as returning a non-zero
status means the module will become locked (impossible to unload or
reload again).
Instead, ensure the module exit function does not get called in the
first place by increasing the module refcnt when the event is enabled.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 35ca5207c2 ("tracing: Add synthetic event command generation functions")
Link: https://lore.kernel.org/20250318180906.226841-1-douglas.raillard@arm.com
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When __ftrace_event_enable_disable invokes the class callback to
unregister the event, the return value is not reported up to the
caller, hence leading to event unregister failures being silently
ignored.
This patch assigns the ret variable to the invocation of the
event unregister callback, so that its return value is stored
and reported to the caller, and it raises a warning in case
of error.
Link: https://lore.kernel.org/20250321170821.101403-1-gpaoloni@redhat.com
Signed-off-by: Gabriele Paoloni <gpaoloni@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Lockdep reports this deadlock log:
osnoise: could not start sampling thread
============================================
WARNING: possible recursive locking detected
--------------------------------------------
CPU0
----
lock(cpu_hotplug_lock);
lock(cpu_hotplug_lock);
Call Trace:
<TASK>
print_deadlock_bug+0x282/0x3c0
__lock_acquire+0x1610/0x29a0
lock_acquire+0xcb/0x2d0
cpus_read_lock+0x49/0x120
stop_per_cpu_kthreads+0x7/0x60
start_kthread+0x103/0x120
osnoise_hotplug_workfn+0x5e/0x90
process_one_work+0x44f/0xb30
worker_thread+0x33e/0x5e0
kthread+0x206/0x3b0
ret_from_fork+0x31/0x50
ret_from_fork_asm+0x11/0x20
</TASK>
This is the deadlock scenario:
osnoise_hotplug_workfn()
guard(cpus_read_lock)(); // first lock call
start_kthread(cpu)
if (IS_ERR(kthread)) {
stop_per_cpu_kthreads(); {
cpus_read_lock(); // second lock call. Cause the AA deadlock
}
}
It is not necessary to call stop_per_cpu_kthreads() which stops osnoise
kthread for every other CPUs in the system if a failure occurs during
hotplug of a certain CPU.
For start_per_cpu_kthreads(), if the start_kthread() call fails,
this function calls stop_per_cpu_kthreads() to handle the error.
Therefore, similarly, there is no need to call stop_per_cpu_kthreads()
again within start_kthread().
So just remove stop_per_cpu_kthreads() from start_kthread to solve this issue.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250321095249.2739397-1-ranxiaokai627@163.com
Fixes: c8895e271f ("trace/osnoise: Support hotplug operations")
Signed-off-by: Ran Xiaokai <ran.xiaokai@zte.com.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The vast majority of ftrace event print fmt consist of a space-separated
field=value pair. Synthetic event currently use a comma-separated
field=value pair, which sticks out from events created via more
classical means.
Align the format of synth events so they look just like any other event,
for better consistency and less headache when doing crude text-based
data processing.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250319215028.1680278-1-douglas.raillard@arm.com
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add compatible string and property for the SiFive CLINT v2. The SiFive
CLINT v2 is incompatible with the SiFive CLINT v0 due to differences
in their control methods.
Signed-off-by: Nick Hu <nick.hu@sifive.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250321083507.25298-1-nick.hu@sifive.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
1. MITIGATION_RETPOLINE is x86-only (defined in arch/x86/Kconfig),
so no need to AND with CONFIG_X86 when checking if enabled.
2. Remove unused declaration of nf_skip_indirect_calls() when
MITIGATION_RETPOLINE is disabled to avoid warnings.
3. Declare nf_skip_indirect_calls() and nf_skip_indirect_calls_enable()
as inline when MITIGATION_RETPOLINE is enabled, as they are called
only once and have simple logic.
Fix follow error with clang-21 when W=1e:
net/netfilter/nf_tables_core.c:39:20: error: unused function 'nf_skip_indirect_calls' [-Werror,-Wunused-function]
39 | static inline bool nf_skip_indirect_calls(void) { return false; }
| ^~~~~~~~~~~~~~~~~~~~~~
1 error generated.
make[4]: *** [scripts/Makefile.build:207: net/netfilter/nf_tables_core.o] Error 1
make[3]: *** [scripts/Makefile.build:465: net/netfilter] Error 2
make[3]: *** Waiting for unfinished jobs....
Fixes: d8d7606278 ("netfilter: nf_tables: add static key to skip retpoline workarounds")
Co-developed-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
nf_sk_lookup_slow_v4 does the conntrack lookup for IPv4 packets to
restore the original 5-tuple in case of SNAT, to be able to find the
right socket (if any). Then socket_match() can correctly check whether
the socket was transparent.
However, the IPv6 counterpart (nf_sk_lookup_slow_v6) lacks this
conntrack lookup, making xt_socket fail to match on the socket when the
packet was SNATed. Add the same logic to nf_sk_lookup_slow_v6.
IPv6 SNAT is used in Kubernetes clusters for pod-to-world packets, as
pods' addresses are in the fd00::/8 ULA subnet and need to be replaced
with the node's external address. Cilium leverages Envoy to enforce L7
policies, and Envoy uses transparent sockets. Cilium inserts an iptables
prerouting rule that matches on `-m socket --transparent` and redirects
the packets to localhost, but it fails to match SNATed IPv6 packets due
to that missing conntrack lookup.
Closes: https://github.com/cilium/cilium/issues/37932
Fixes: eb31628e37 ("netfilter: nf_tables: Add support for IPv6 NAT")
Signed-off-by: Maxim Mikityanskiy <maxim@isovalent.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
kzalloc() already zero-initializes the destination buffer, making
strscpy() sufficient for safely copying the name. The additional NUL-
padding performed by strscpy_pad() is unnecessary.
The size parameter is optional, and strscpy() automatically determines
the size of the destination buffer using sizeof() if the argument is
omitted. This makes the explicit sizeof() call unnecessary; remove it.
No functional changes intended.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
It is possible that ctx in nfqnl_build_packet_message() could be used
before it is properly initialize, which is only initialized
by nfqnl_get_sk_secctx().
This patch corrects this problem by initializing the lsmctx to a safe
value when it is declared.
This is similar to the commit 35fcac7a7c
("audit: Initialize lsmctx to avoid memory allocation error").
Fixes: 2d470c7781 ("lsm: replace context+len with lsm_context")
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add support for AMD MDB (Multimedia DMA Bridge) IP core as Root Port.
The Versal2 devices include MDB Module. The integrated block for MDB
along with the integrated bridge can function as PCIe Root Port
controller at Gen5 32-GT/s operation per lane.
Bridge supports error and INTx interrupts and are handled using platform
specific interrupt line in Versal2.
Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@amd.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250228093351.923615-4-thippeswamy.havalige@amd.com
[bhelgaas: only present on ARM64-based SoCs; squash Kconfig dependency on
ARM64 from Geert Uytterhoeven <geert+renesas@glider.be>:
https://lore.kernel.org/r/eaef1dea7edcf146aa377d5e5c5c85a76ff56bae.1742306383.git.geert+renesas@glider.be]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
[kwilczynski: commit log, code comments and error messages clean-up,
drop redundant "depends on PCI" from Kconfig, expose the error code
as part of error messages where appropriatie, change "depends on"
expression to match existing style from other drivers]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=0DeL
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf events fix from Ingo Molnar:
"Fix an information leak regression in the AMD IBS PMU code"
* tag 'perf-urgent-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/amd/ibs: Prevent leaking sensitive data to userspace
Convert hash_errmap in error.c to use the generic hashtable
implementation from hashtable.h instead of the manual hlist_head array
implementation.
This simplifies the code and makes it more maintainable by using the
standard hashtable API and removes the need for manual hash table
management.
Signed-off-by: Sasha Levin <sashal@kernel.org>
Message-ID: <20250320145200.3124863-1-sashal@kernel.org>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
In b529c06f9d (Update the documentation referencing Plan 9 from User
Space., 2020-04-26), another instance of the link was left unfixed.
Fix that as well.
Signed-off-by: Tuomas Ahola <taahol@utu.fi>
Message-ID: <20250322153639.4917-1-taahol@utu.fi>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>