Tariq Toukan says:
====================
net/mlx5e: SHAMPO fixes for 64KB page size
This series by Dragos contains fixes for HW-GRO issues found on systems
with 64KB page size.
====================
Link: https://patch.msgid.link/1762238915-1027590-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MLX5E_SHAMPO_WQ_HEADER_PER_PAGE and
MLX5E_SHAMPO_LOG_MAX_HEADER_ENTRY_SIZE macros are used directly in
several places under the assumption that there will always be more
headers per WQE than headers per page. However, this assumption doesn't
hold for 64K page sizes and higher MTUs (> 4K). This can be first
observed during header page allocation: ksm_entries will become 0 during
alignment to MLX5E_SHAMPO_WQ_HEADER_PER_PAGE.
This patch introduces 2 additional members to the mlx5e_shampo_hd struct
which are meant to be used instead of the macrose mentioned above.
When the number of headers per WQE goes below
MLX5E_SHAMPO_WQ_HEADER_PER_PAGE, clamp the number of headers per
page and expand the header size accordingly so that the headers
for one WQE cover a full page.
All the formulas are adapted to use these two new members.
Fixes: 945ca432bf ("net/mlx5e: SHAMPO, Drop info array")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1762238915-1027590-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlx5e_hw_gro_skb_has_enough_space() uses a formula to check if there is
enough space in the skb frags to store more data. This formula is
incorrect for 64K page sizes and it triggers early GRO session
termination because the first fragment will blow up beyond
GRO_LEGACY_MAX_SIZE.
This patch adds a special case for page sizes >= GRO_LEGACY_MAX_SIZE
(64K) which uses the skb->len instead. Within this context,
the check is safe from fragment overflow because the hardware
will continuously fill the data up to the reservation size of 64K
and the driver will coalesce all data from the same page to the same
fragment. This means that the data will span one fragment or at most
two for such a large page size.
It is expected that the if statement will be optimized out as the
check is done with constants.
Fixes: 92552d3abd ("net/mlx5e: HW_GRO cqe handler implementation")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1762238915-1027590-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
HW-GRO is broken on mlx5 for 64K page sizes. The patch in the fixes tag
didn't take into account larger page sizes when doing an align down
of max_ksm_entries. For 64K page size, max_ksm_entries is 0 which will skip
mapping header pages via WQE UMR. This breaks header-data split
and will result in the following syndrome:
mlx5_core 0000:00:08.0 eth2: Error cqe on cqn 0x4c9, ci 0x0, qn 0x1133, opcode 0xe, syndrome 0x4, vendor syndrome 0x32
00000000: 00 00 00 00 04 4a 00 00 00 00 00 00 20 00 93 32
00000010: 55 00 00 00 fb cc 00 00 00 00 00 00 07 18 00 00
00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 4a
00000030: 00 00 3b c7 93 01 32 04 00 00 00 00 00 00 bf e0
mlx5_core 0000:00:08.0 eth2: ERR CQE on RQ: 0x1133
Furthermore, the function that fills in WQE UMRs for the headers
(mlx5e_build_shampo_hd_umr()) only supports mapping page sizes that
fit in a single UMR WQE.
This patch goes back to the old non-aligned max_ksm_entries value and it
changes mlx5e_build_shampo_hd_umr() to support mapping a large page over
multiple UMR WQEs.
This means that mlx5e_build_shampo_hd_umr() can now leave a page only
partially mapped. The caller, mlx5e_alloc_rx_hd_mpwqe(), ensures that
there are enough UMR WQEs to cover complete pages by working on
ksm_entries that are multiples of MLX5E_SHAMPO_WQ_HEADER_PER_PAGE.
Fixes: 8a0ee54027 ("net/mlx5e: SHAMPO, Simplify UMR allocation for headers")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1762238915-1027590-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ICSSG driver does the initial FDB configuration which
includes setting the control registers. Other run time
management like learning is managed by the PRU's. The default
FDB hash size used by the firmware is 512 slots, which is
currently missing in the current driver. Update the driver
FDB config to include FDB hash size as well.
Please refer trm [1] 6.4.14.12.17 section on how the FDB config
register gets configured. From the table 6-1404, there is a reset
field for FDB_HAS_SIZE which is 4, meaning 1024 slots. Currently
the driver is not updating this reset value from 4(1024 slots) to
3(512 slots). This patch fixes this by updating the reset value
to 512 slots.
[1]: https://www.ti.com/lit/pdf/spruim2
Fixes: abd5576b9c ("net: ti: icssg-prueth: Add support for ICSSG switch firmware")
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251104104415.3110537-1-m-malladi@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
One GRO-cell device's NAPI callback can nest into the GRO-cell of
another device if the underlying device is also using GRO-cell.
This is the case for IPsec over vxlan.
These two GRO-cells are separate devices. From lockdep's point of view
it is the same because each device is sharing the same lock class and so
it reports a possible deadlock assuming one device is nesting into
itself.
Hold the bh_lock only while accessing gro_cell::napi_skbs in
gro_cell_poll(). This reduces the locking scope and avoids acquiring the
same lock class multiple times.
Fixes: 25718fdcbd ("net: gro_cells: Use nested-BH locking for gro_cell")
Reported-by: Gal Pressman <gal@nvidia.com>
Closes: https://lore.kernel.org/all/66664116-edb8-48dc-ad72-d5223696dd19@nvidia.com/
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20251104153435.ty88xDQt@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
LIBIE_FWLOG is unusable without DEBUG_FS. Mark it in Kconfig.
Fix build error on ixgbe when DEBUG_FS is not set. To not add another
layer of #if IS_ENABLED(LIBIE_FWLOG) in ixgbe fwlog code define debugfs
dentry even when DEBUG_FS isn't enabled. In this case the dummy
functions of LIBIE_FWLOG will be used, so not initialized dentry isn't a
problem.
Fixes: 641585bc97 ("ixgbe: fwlog support for e610")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/lkml/f594c621-f9e1-49f2-af31-23fbcb176058@roeck-us.net/
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20251104172333.752445-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Adding test that verifies we get expected initial 2 entries from
stacktrace for rawtp probe via ORC unwind.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20251104215405.168643-5-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Adding test that attaches kprobe/kretprobe multi and verifies the
ORC stacktrace matches expected functions.
Adding bpf_testmod_stacktrace_test function to bpf_testmod kernel
module which is called through several functions so we get reliable
call path for stacktrace.
The test is only for ORC unwinder to keep it simple.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20251104215405.168643-4-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently we don't get stack trace via ORC unwinder on top of fgraph exit
handler. We can see that when generating stacktrace from kretprobe_multi
bpf program which is based on fprobe/fgraph.
The reason is that the ORC unwind code won't get pass the return_to_handler
callback installed by fgraph return probe machinery.
Solving this by creating stack frame in return_to_handler expected by
ftrace_graph_ret_addr function to recover original return address and
continue with the unwind.
Also updating the pt_regs data with cs/flags/rsp which are needed for
successful stack retrieval from ebpf bpf_get_stackid helper.
- in get_perf_callchain we check user_mode(regs) so CS has to be set
- in perf_callchain_kernel we call perf_hw_regs(regs), so EFLAGS/FIXED
has to be unset
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20251104215405.168643-3-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
This reverts commit 83f44ae0f8.
Currently we store initial stacktrace entry twice for non-HW ot_regs, which
means callers that fail perf_hw_regs(regs) condition in perf_callchain_kernel.
It's easy to reproduce this bpftrace:
# bpftrace -e 'tracepoint:sched:sched_process_exec { print(kstack()); }'
Attaching 1 probe...
bprm_execve+1767
bprm_execve+1767
do_execveat_common.isra.0+425
__x64_sys_execve+56
do_syscall_64+133
entry_SYSCALL_64_after_hwframe+118
When perf_callchain_kernel calls unwind_start with first_frame, AFAICS
we do not skip regs->ip, but it's added as part of the unwind process.
Hence reverting the extra perf_callchain_store for non-hw regs leg.
I was not able to bisect this, so I'm not really sure why this was needed
in v5.2 and why it's not working anymore, but I could see double entries
as far as v5.10.
I did the test for both ORC and framepointer unwind with and without the
this fix and except for the initial entry the stacktraces are the same.
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20251104215405.168643-2-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
8 and 16 bit formats use a different layout on
GB20x than they did on prior chips. Add the
corresponding DRM format modifiers to the list of
modifiers supported by the display engine on such
chips, and filter the supported modifiers for each
format based on its bytes per pixel in
nv50_plane_format_mod_supported().
Note this logic will need to be updated when GB10
support is added, since it is a GB20x chip that
uses the pre-GB20x sector layout for all formats.
Fixes: 6cc6e08d45 ("drm/nouveau/kms: add support for GB20x")
Signed-off-by: James Jones <jajones@nvidia.com>
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251030181153.1208-3-jajones@nvidia.com
The layout of bits within the individual tiles
(referred to as sectors in the
DRM_FORMAT_MOD_NVIDIA_BLOCK_LINEAR_2D() macro)
changed for 8 and 16-bit surfaces starting in
Blackwell 2 GPUs (With the exception of GB10).
To denote the difference, extend the sector field
in the parametric format modifier definition used
to generate modifier values for NVIDIA hardware.
Without this change, it would be impossible to
differentiate the two layouts based on modifiers,
and as a result software could attempt to share
surfaces directly between pre-GB20x and GB20x
cards, resulting in corruption when the surface
was accessed on one of the GPUs after being
populated with content by the other.
Of note: This change causes the
DRM_FORMAT_MOD_NVIDIA_BLOCK_LINEAR_2D() macro to
evaluate its "s" parameter twice, with the side
effects that entails. I surveyed all usage of the
modifier in the kernel and Mesa code, and that
does not appear to be problematic in any current
usage, but I thought it was worth calling out.
Fixes: 6cc6e08d45 ("drm/nouveau/kms: add support for GB20x")
Signed-off-by: James Jones <jajones@nvidia.com>
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251030181153.1208-2-jajones@nvidia.com
Set the DMA mask before calling nvkm_device_ctor(), so that when the
flush page is created in nvkm_fb_ctor(), the allocation will not fail
if the page is outside of DMA address space, which can easily happen if
IOMMU is disable. In such situations, you will get an error like this:
nouveau 0000:65:00.0: DMA addr 0x0000000107c56000+4096 overflow (mask ffffffff, bus limit 0).
Commit 38f5359354 ("rm/nouveau/pci: set streaming DMA mask early")
set the mask after calling nvkm_device_ctor(), but back then there was
no flush page being created, which might explain why the mask wasn't
set earlier.
Flush page allocation was added in commit 5728d06419 ("drm/nouveau/fb:
handle sysmem flush page from common code"). nvkm_fb_ctor() calls
alloc_page(), which can allocate a page anywhere in system memory, but
then calls dma_map_page() on that page. But since the DMA mask is still
set to 32, the map can fail if the page is allocated above 4GB. This is
easy to reproduce on systems with a lot of memory and IOMMU disabled.
An alternative approach would be to force the allocation of the flush
page to low memory, by specifying __GFP_DMA32. However, this would
always allocate the page in low memory, even though the hardware can
access high memory.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20251014174512.3172102-1-ttabi@nvidia.com
Toolchain and infrastructure:
- Fix/workaround a couple Rust 1.91.0 build issues when sanitizers are
enabled due to extra checking performed by the compiler and an
upstream issue already fixed for Rust 1.93.0.
- Fix future Rust 1.93.0 builds by supporting the stabilized name for
the 'no-jump-tables' flag.
- Fix a couple private/broken intra-doc links uncovered by the future
move of pin-init to 'syn'.
-----BEGIN PGP SIGNATURE-----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=0bvf
-----END PGP SIGNATURE-----
Merge tag 'rust-fixes-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rust fixes from Miguel Ojeda:
- Fix/workaround a couple Rust 1.91.0 build issues when sanitizers are
enabled due to extra checking performed by the compiler and an
upstream issue already fixed for Rust 1.93.0
- Fix future Rust 1.93.0 builds by supporting the stabilized name for
the 'no-jump-tables' flag
- Fix a couple private/broken intra-doc links uncovered by the future
move of pin-init to 'syn'
* tag 'rust-fixes-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: kbuild: support `-Cjump-tables=n` for Rust 1.93.0
rust: kbuild: workaround `rustdoc` doctests modifier bug
rust: kbuild: treat `build_error` and `rustdoc` as kernel objects
rust: condvar: fix broken intra-doc link
rust: devres: fix private intra-doc link
data_reloc_print_warning_inode() calls btrfs_get_fs_root() to obtain
local_root, but fails to release its reference when paths_from_inode()
returns an error. This causes a potential memory leak.
Add a missing btrfs_put_root() call in the error path to properly
decrease the reference count of local_root.
Fixes: b9a9a85059 ("btrfs: output affected files when relocation fails")
CC: stable@vger.kernel.org # 6.6+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
scrub_raid56_parity_stripe() allocates a bio with bio_alloc(), but
fails to release it on some error paths, leading to a potential
memory leak.
Add the missing bio_put() calls to properly drop the bio reference
in those error cases.
Fixes: 1009254bf2 ("btrfs: scrub: use scrub_stripe to implement RAID56 P/Q scrub")
CC: stable@vger.kernel.org # 6.6+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When logging that a new name exists, we skip updating the inode's
last_log_commit field to prevent a later explicit fsync against the inode
from doing nothing (as updating last_log_commit makes btrfs_inode_in_log()
return true). We are detecting, at btrfs_log_inode(), that logging a new
name is happening by checking the logging mode is not LOG_INODE_EXISTS,
but that is not enough because we may log parent directories when logging
a new name of a file in LOG_INODE_ALL mode - we need to check that the
logging_new_name field of the log context too.
An example scenario where this results in an explicit fsync against a
directory not persisting changes to the directory is the following:
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt
$ touch /mnt/foo
$ sync
$ mkdir /mnt/dir
# Write some data to our file and fsync it.
$ xfs_io -c "pwrite -S 0xab 0 64K" -c "fsync" /mnt/foo
# Add a new link to our file. Since the file was logged before, we
# update it in the log tree by calling btrfs_log_new_name().
$ ln /mnt/foo /mnt/dir/bar
# fsync the root directory - we expect it to persist the dentry for
# the new directory "dir".
$ xfs_io -c "fsync" /mnt
<power fail>
After mounting the fs the entry for directory "dir" does not exists,
despite the explicit fsync on the root directory.
Here's why this happens:
1) When we fsync the file we log the inode, so that it's present in the
log tree;
2) When adding the new link we enter btrfs_log_new_name(), and since the
inode is in the log tree we proceed to updating the inode in the log
tree;
3) We first set the inode's last_unlink_trans to the current transaction
(early in btrfs_log_new_name());
4) We then eventually enter btrfs_log_inode_parent(), and after logging
the file's inode, we call btrfs_log_all_parents() because the inode's
last_unlink_trans matches the current transaction's ID (updated in the
previous step);
5) So btrfs_log_all_parents() logs the root directory by calling
btrfs_log_inode() for the root's inode with a log mode of LOG_INODE_ALL
so that new dentries are logged;
6) At btrfs_log_inode(), because the log mode is LOG_INODE_ALL, we
update root inode's last_log_commit to the last transaction that
changed the inode (->last_sub_trans field of the inode), which
corresponds to the current transaction's ID;
7) Then later when user space explicitly calls fsync against the root
directory, we enter btrfs_sync_file(), which calls skip_inode_logging()
and that returns true, since its call to btrfs_inode_in_log() returns
true and there are no ordered extents (it's a directory, never has
ordered extents). This results in btrfs_sync_file() returning without
syncing the log or committing the current transaction, so all the
updates we did when logging the new name, including logging the root
directory, are not persisted.
So fix this by but updating the inode's last_log_commit if we are sure
we are not logging a new name (if ctx->logging_new_name is false).
A test case for fstests will follow soon.
Reported-by: Vyacheslav Kovalevsky <slava.kovalevskiy.2014@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/03c5d7ec-5b3d-49d1-95bc-8970a7f82d87@gmail.com/
Fixes: 130341be7f ("btrfs: always update the logged transaction when logging new names")
CC: stable@vger.kernel.org # 6.1+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The stripe offset calculation in the zoned code for raid0 and raid10
wrongly uses map->stripe_size to calculate it. In fact, map->stripe_size is
the size of the device extent composing the block group, which always is
the zone_size on the zoned setup.
Fix it by using BTRFS_STRIPE_LEN and BTRFS_STRIPE_LEN_SHIFT. Also, optimize
the calculation a bit by doing the common calculation only once.
Fixes: c0d90a79e8 ("btrfs: zoned: fix alloc_offset calculation for partly conventional block groups")
CC: stable@vger.kernel.org # 6.17+
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When a block group contains both conventional zone and sequential zone, the
capacity of the block group is wrongly set to the block group's full
length. The capacity should be calculated in btrfs_load_block_group_* using
the last allocation offset.
Fixes: 568220fa96 ("btrfs: zoned: support RAID0/1/10 on top of raid stripe tree")
CC: stable@vger.kernel.org # v6.12+
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
->nr_pages is int, it needs type extension before calculating the region
size.
Fixes: a90558b36c ("io_uring/memmap: helper for pinning region pages")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
[axboe: style fixup]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The RP1 ethernet controller DT node contains a local-mac-address
property to pass the MAC address from the boot loader to the kernel. The
boot loader does not fill the MAC address as the ethernet0 alias is
missing. Add it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Andrea della Porta <andrea.porta@suse.com>
Link: https://lore.kernel.org/r/20251102111443.18206-1-laurent.pinchart@ideasonboard.com
Fixes: 43456fdfc0 ("arm64: dts: broadcom: Enable RP1 ethernet for Raspberry Pi 5")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
In Raspberry Pi 5 DTS, the Ethernet clock rates must be assigned
as the default clock register values are not valid for the
Ethernet interface to function.
This can be done either in rp1_clocks node or in rp1_eth node.
Define the rates in rp1_eth node, as those clocks are 'leaf' clocks
used specifically by the Ethernet device only.
Fixes: 43456fdfc0 ("arm64: dts: broadcom: Enable RP1 ethernet for Raspberry Pi 5")
Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
Link: https://lore.kernel.org/r/20251021135533.5517-1-andrea.porta@suse.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
xfs_select_open_zone_mru needs to pass XFS_ZONE_ALLOC_OK to
xfs_try_use_zone because we only want to tightly pack into zones of the
same or a compatible temperature instead of any available zone.
This got broken in commit 0301dae732 ("xfs: refactor hint based zone
allocation"), which failed to update this particular caller when
switching to an enum. xfs/638 sometimes, but not reliably fails due to
this change.
Fixes: 0301dae732 ("xfs: refactor hint based zone allocation")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Drop the rtgrop reference when xfs_init_zone fails for a conventional
device.
Fixes: 4e4d520755 ("xfs: add the zoned space allocator")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
I think there are several things wrong with this function:
A) xfs_bmapi_write can return a much larger unwritten mapping than what
the caller asked for. We convert part of that range to written, but
return the entire written mapping to iomap even though that's
inaccurate.
B) The arguments to xfs_reflink_convert_cow_locked are wrong -- an
unwritten mapping could be *smaller* than the write range (or even
the hole range). In this case, we convert too much file range to
written state because we then return a smaller mapping to iomap.
C) It doesn't handle delalloc mappings. This I covered in the patch
that I already sent to the list.
D) Reassigning count_fsb to handle the hole means that if the second
cmap lookup attempt succeeds (due to racing with someone else) we
trim the mapping more than is strictly necessary. The changing
meaning of count_fsb makes this harder to notice.
E) The tracepoint is kinda wrong because @length is mutated. That makes
it harder to chase the data flows through this function because you
can't just grep on the pos/bytecount strings.
F) We don't actually check that the br_state = XFS_EXT_NORM assignment
is accurate, i.e that the cow fork actually contains a written
mapping for the range we're interested in
G) Somewhat inadequate documentation of why we need to xfs_trim_extent
so aggressively in this function.
H) Not sure why xfs_iomap_end_fsb is used here, the vfs already clamped
the write range to s_maxbytes.
Fix these issues, and then the atomic writes regressions in generic/760,
generic/617, generic/091, generic/263, and generic/521 all go away for
me.
Cc: stable@vger.kernel.org # v6.16
Fixes: bd1d2c21d5 ("xfs: add xfs_atomic_write_cow_iomap_begin()")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
With the 20 Oct 2025 release of fstests, generic/521 fails for me on
regular (aka non-block-atomic-writes) storage:
QA output created by 521
dowrite: write: Input/output error
LOG DUMP (8553 total operations):
1( 1 mod 256): SKIPPED (no operation)
2( 2 mod 256): WRITE 0x7e000 thru 0x8dfff (0x10000 bytes) HOLE
3( 3 mod 256): READ 0x69000 thru 0x79fff (0x11000 bytes)
4( 4 mod 256): FALLOC 0x53c38 thru 0x5e853 (0xac1b bytes) INTERIOR
5( 5 mod 256): COPY 0x55000 thru 0x59fff (0x5000 bytes) to 0x25000 thru 0x29fff
6( 6 mod 256): WRITE 0x74000 thru 0x88fff (0x15000 bytes)
7( 7 mod 256): ZERO 0xedb1 thru 0x11693 (0x28e3 bytes)
with a warning in dmesg from iomap about XFS trying to give it a
delalloc mapping for a directio write. Fix the software atomic write
iomap_begin code to convert the reservation into a written mapping.
This doesn't fix the data corruption problems reported by generic/760,
but it's a start.
Cc: stable@vger.kernel.org # v6.16
Fixes: bd1d2c21d5 ("xfs: add xfs_atomic_write_cow_iomap_begin()")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Revert an ath12k change which resulted in a significance performance
impact on WCN7850.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ/mtSHzPUi16IfDEksFbugiYzLewUCaQjAlgAKCRAsFbugiYzL
e1g/AP0VjhhuC5zzElFTNf+5HTgNnXAvs6ghg2BUPkJug+X6xAD9GnKdlrqoo4qw
iGex7lkBnIzPn+fTlF0xPHFDvF0cgww=
=b8DL
-----END PGP SIGNATURE-----
Merge tag 'ath-current-20251103' of git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
Jeff Johnson says:
==================
ath.git update for v6.18-rc5
Revert an ath12k change which resulted in a significance performance
impact on WCN7850.
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
hwsim radios marked destroy_on_close are removed when the Netlink socket
that created them is closed. As the portid is not unique across network
namespaces, closing a socket in one namespace may remove radios in another
if it has the destroy_on_close flag set.
Instead of matching the network namespace, match the netgroup of the radio
to limit radio removal to those that have been created by the closing
Netlink socket. The netgroup of a radio identifies the network namespace
it was created in, and matching on it removes a destroy_on_close radio
even if it has been moved to another namespace.
Fixes: 100cb9ff40 ("mac80211_hwsim: Allow managing radios from non-initial namespaces")
Signed-off-by: Martin Willi <martin@strongswan.org>
Link: https://patch.msgid.link/20251103082436.30483-1-martin@strongswan.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
As per the i.MX8MP TRM, section 14.2 "AUDIO_BLK_CTRL", table 14.2.3.1.1
"memory map", the definition of the EARC control register shows that the
EARC controller software reset is controlled via bit 0, while the EARC PHY
software reset is controlled via bit 1.
This means that the current definitions of IMX8MP_AUDIOMIX_EARC_RESET_MASK
and IMX8MP_AUDIOMIX_EARC_PHY_RESET_MASK are wrong since their values would
imply that the EARC controller software reset is controlled via bit 1 and
the EARC PHY software reset is controlled via bit 2. Fix them.
Fixes: a83bc87cd3 ("reset: imx8mp-audiomix: Prepare the code for more reset bits")
Cc: stable@vger.kernel.org
Reviewed-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Since commit d24cfee7f6 ("spi: Fix acpi deferred irq probe"), the
acpi_dev_gpio_irq_get() call gets delayed till spi_probe() is called
on the SPI device.
If there is no driver for the SPI device then the move to spi_probe()
results in acpi_dev_gpio_irq_get() never getting called. This may
cause problems by leaving the GPIO pin floating because this call is
responsible for setting up the GPIO pin direction and/or bias according
to the values from the ACPI tables.
Re-add the removed acpi_dev_gpio_irq_get() in acpi_register_spi_device()
to ensure the GPIO pin is always correctly setup, while keeping the
acpi_dev_gpio_irq_get() call added to spi_probe() to deal with
-EPROBE_DEFER returns caused by the GPIO controller not having a driver
yet.
Link: https://bbs.archlinux.org/viewtopic.php?id=302348
Fixes: d24cfee7f6 ("spi: Fix acpi deferred irq probe")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://patch.msgid.link/20251102190921.30068-1-hansg@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Enforce checking of sb_min_blocksize() calls and update all callers
accordingly.
* patches from https://patch.msgid.link/20251104125009.2111925-2-yangyongpeng.storage@gmail.com:
block: add __must_check attribute to sb_min_blocksize()
xfs: check the return value of sb_min_blocksize() in xfs_fs_fill_super
isofs: check the return value of sb_min_blocksize() in isofs_fill_super
exfat: check return value of sb_min_blocksize in exfat_read_boot_sector
vfat: fix missing sb_min_blocksize() return value checks
Link: https://patch.msgid.link/20251104125009.2111925-2-yangyongpeng.storage@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
bm_register_write() opens an executable file using open_exec(), which
internally calls do_open_execat() and denies write access on the file to
avoid modification while it is being executed.
However, when an error occurs, bm_register_write() closes the file using
filp_close() directly. This does not restore the write permission, which
may cause subsequent write operations on the same file to fail.
Fix this by calling exe_file_allow_write_access() before filp_close() to
restore the write permission properly.
Fixes: e7850f4d84 ("binfmt_misc: fix possible deadlock in bm_register_write")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Link: https://patch.msgid.link/20251105022923.1813587-1-zilin@seu.edu.cn
Signed-off-by: Christian Brauner <brauner@kernel.org>
When sb_min_blocksize() returns 0 and the return value is not checked,
it may lead to a situation where sb->s_blocksize is 0 when
accessing the filesystem super block. After commit a64e5a5960
("bdev: add back PAGE_SIZE block size validation for
sb_set_blocksize()"), this becomes more likely to happen when the
block device’s logical_block_size is larger than PAGE_SIZE and the
filesystem is unformatted. Add the __must_check attribute to ensure
callers always check the return value.
Cc: stable@vger.kernel.org # v6.15
Suggested-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Link: https://patch.msgid.link/20251104125009.2111925-6-yangyongpeng.storage@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
In virtio_fs_add_queues_sysfs(), the code incorrectly checks fs->mqs_kobj
after calling kobject_create_and_add(). Change the check to fsvq->kobj
(fs->mqs_kobj -> fsvq->kobj) to ensure the per-queue kobject is
successfully created.
Fixes: 87cbdc396a ("virtio_fs: add sysfs entries for queue information")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/20251027104658.1668537-1-alok.a.tiwari@oracle.com
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
sb_min_blocksize() may return 0. Check its return value to avoid the
filesystem super block when sb->s_blocksize is 0.
Cc: stable@vger.kernel.org # v6.15
Fixes: a64e5a5960 ("bdev: add back PAGE_SIZE block size validation for sb_set_blocksize()")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Link: https://patch.msgid.link/20251104125009.2111925-5-yangyongpeng.storage@gmail.com
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
sb_min_blocksize() may return 0. Check its return value to avoid
opt->blocksize and sb->s_blocksize is 0.
Cc: stable@vger.kernel.org # v6.15
Fixes: 1b17a46c92 ("isofs: convert isofs to use the new mount API")
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Link: https://patch.msgid.link/20251104125009.2111925-4-yangyongpeng.storage@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
sb_min_blocksize() may return 0. Check its return value to avoid
accessing the filesystem super block when sb->s_blocksize is 0.
Cc: stable@vger.kernel.org # v6.15
Fixes: 719c1e1829 ("exfat: add super block operations")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Link: https://patch.msgid.link/20251104125009.2111925-3-yangyongpeng.storage@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Clang doesn't like that (1ULL<<(64)) overflows when initializing a
global scope variable, even if that part of the ternary isn't used when
n = 64. The same initialization can be done without warnings in function
scopes, and GCC doesn't mind either way.
The build failure that highlighted this was already fixed in a different
way [1], which also has detailed links to the Clang issues. However it's
not going to be long before the same thing happens again, so it's better
to fix the root cause.
Fix it by using GENMASK_ULL() which does exactly the same thing, is much
more readable anyway, and doesn't have a shift that overflows.
[1]: https://lore.kernel.org/all/20250918-mmp-pdma-simplify-dma-addressing-v1-1-5c2be2b85696@riscstar.com/
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20251030-james-fix-dma_bit_mask-v1-1-ad1ce7cfab6e@linaro.org
In the commit referenced by the Fixes tag,
devm_gpiod_get_optional() was replaced by manual
GPIO management, relying on the regulator core to release the
GPIO descriptor. However, this approach does not account for the
error path: when regulator registration fails, the core never
takes over the GPIO, resulting in a resource leak.
Add gpiod_put() before returning on regulator registration failure.
Fixes: 5e6f3ae5c1 ("regulator: fixed: Let core handle GPIO descriptor")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20251028172828.625-1-vulab@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
The Mesa issue referenced below pointed out a possible deadlock:
[ 1231.611031] Possible interrupt unsafe locking scenario:
[ 1231.611033] CPU0 CPU1
[ 1231.611034] ---- ----
[ 1231.611035] lock(&xa->xa_lock#17);
[ 1231.611038] local_irq_disable();
[ 1231.611039] lock(&fence->lock);
[ 1231.611041] lock(&xa->xa_lock#17);
[ 1231.611044] <Interrupt>
[ 1231.611045] lock(&fence->lock);
[ 1231.611047]
*** DEADLOCK ***
In this example, CPU0 would be any function accessing job->dependencies
through the xa_* functions that don't disable interrupts (eg:
drm_sched_job_add_dependency(), drm_sched_entity_kill_jobs_cb()).
CPU1 is executing drm_sched_entity_kill_jobs_cb() as a fence signalling
callback so in an interrupt context. It will deadlock when trying to
grab the xa_lock which is already held by CPU0.
Replacing all xa_* usage by their xa_*_irq counterparts would fix
this issue, but Christian pointed out another issue: dma_fence_signal
takes fence.lock and so does dma_fence_add_callback.
dma_fence_signal() // locks f1.lock
-> drm_sched_entity_kill_jobs_cb()
-> foreach dependencies
-> dma_fence_add_callback() // locks f2.lock
This will deadlock if f1 and f2 share the same spinlock.
To fix both issues, the code iterating on dependencies and re-arming them
is moved out to drm_sched_entity_kill_jobs_work().
Cc: stable@vger.kernel.org # v6.2+
Fixes: 2fdb8a8f07 ("drm/scheduler: rework entity flush, kill and fini")
Link: https://gitlab.freedesktop.org/mesa/mesa/-/issues/13908
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
[phasta: commit message nits]
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patch.msgid.link/20251104095358.15092-1-pierre-eric.pelloux-prayer@amd.com
-----BEGIN PGP SIGNATURE-----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=RhZS
-----END PGP SIGNATURE-----
Merge tag 'media/v6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- honour privacy led with pdx86/int3472
- fix invalid file access on cx18 and ivtv
- forbid remove_bufs when legacy fileio is active on videbuf2
- add an heuristic to find stream entity on uvcvideo
* tag 'media/v6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: videobuf2: forbid remove_bufs when legacy fileio is active
media: uvcvideo: Use heuristic to find stream entity
media: v4l2-subdev / pdx86: int3472: Use "privacy" as con_id for the privacy LED
media: ivtv: Fix invalid access to file *
media: cx18: Fix invalid access to file *
Fix a AA deadlock in refill_skbs() where memory allocation while holding
skb_pool->lock can trigger a recursive lock acquisition attempt.
The deadlock scenario occurs when the system is under severe memory
pressure:
1. refill_skbs() acquires skb_pool->lock (spinlock)
2. alloc_skb() is called while holding the lock
3. Memory allocator fails and calls slab_out_of_memory()
4. This triggers printk() for the OOM warning
5. The console output path calls netpoll_send_udp()
6. netpoll_send_udp() attempts to acquire the same skb_pool->lock
7. Deadlock: the lock is already held by the same CPU
Call stack:
refill_skbs()
spin_lock_irqsave(&skb_pool->lock) <- lock acquired
__alloc_skb()
kmem_cache_alloc_node_noprof()
slab_out_of_memory()
printk()
console_flush_all()
netpoll_send_udp()
skb_dequeue()
spin_lock_irqsave(&skb_pool->lock) <- deadlock attempt
This bug was exposed by commit 248f6571fd ("netpoll: Optimize skb
refilling on critical path") which removed refill_skbs() from the
critical path (where nested printk was being deferred), letting nested
printk being called from inside refill_skbs()
Refactor refill_skbs() to never allocate memory while holding
the spinlock.
Another possible solution to fix this problem is protecting the
refill_skbs() from nested printks, basically calling
printk_deferred_{enter,exit}() in refill_skbs(), then, any nested
pr_warn() would be deferred.
I prefer this approach, given I _think_ it might be a good idea to move
the alloc_skb() from GFP_ATOMIC to GFP_KERNEL in the future, so, having
the alloc_skb() outside of the lock will be necessary step.
There is a possible TOCTOU issue when checking for the pool length, and
queueing the new allocated skb, but, this is not an issue, given that
an extra SKB in the pool is harmless and it will be eventually used.
Signed-off-by: Breno Leitao <leitao@debian.org>
Fixes: 248f6571fd ("netpoll: Optimize skb refilling on critical path")
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251103-fix_netpoll_aa-v4-1-4cfecdf6da7c@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
