Make knav_dma_open_channel consistently return NULL on error instead
of ERR_PTR. Currently the header include/linux/soc/ti/knav_dma.h
returns NULL when the driver is disabled, but the driver
implementation does not even return NULL or ERR_PTR on failure,
causing inconsistency in the users. This results in a crash in
netcp_free_navigator_resources as followed (trimmed):
Unhandled fault: alignment exception (0x221) at 0xfffffff2
[fffffff2] *pgd=80000800207003, *pmd=82ffda003, *pte=00000000
Internal error: : 221 [#1] SMP ARM
Modules linked in:
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.17.0-rc7 #1 NONE
Hardware name: Keystone
PC is at knav_dma_close_channel+0x30/0x19c
LR is at netcp_free_navigator_resources+0x2c/0x28c
[... TRIM...]
Call trace:
knav_dma_close_channel from netcp_free_navigator_resources+0x2c/0x28c
netcp_free_navigator_resources from netcp_ndo_open+0x430/0x46c
netcp_ndo_open from __dev_open+0x114/0x29c
__dev_open from __dev_change_flags+0x190/0x208
__dev_change_flags from netif_change_flags+0x1c/0x58
netif_change_flags from dev_change_flags+0x38/0xa0
dev_change_flags from ip_auto_config+0x2c4/0x11f0
ip_auto_config from do_one_initcall+0x58/0x200
do_one_initcall from kernel_init_freeable+0x1cc/0x238
kernel_init_freeable from kernel_init+0x1c/0x12c
kernel_init from ret_from_fork+0x14/0x38
[... TRIM...]
Standardize the error handling by making the function return NULL on
all error conditions. The API is used in just the netcp_core.c so the
impact is limited.
Note, this change, in effect reverts commit 5b6cb43b4d ("net:
ethernet: ti: netcp_core: return error while dma channel open issue"),
but provides a less error prone implementation.
Suggested-by: Simon Horman <horms@kernel.org>
Suggested-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251103162811.3730055-1-nm@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 4959aebba8 ("virtio-net: use mtu size as buffer length
for big packets"), when guest gso is off, the allocated size for big
packets is not MAX_SKB_FRAGS * PAGE_SIZE anymore but depends on
negotiated MTU. The number of allocated frags for big packets is stored
in vi->big_packets_num_skbfrags.
Because the host announced buffer length can be malicious (e.g. the host
vhost_net driver's get_rx_bufs is modified to announce incorrect
length), we need a check in virtio_net receive path. Currently, the
check is not adapted to the new change which can lead to NULL page
pointer dereference in the below while loop when receiving length that
is larger than the allocated one.
This commit fixes the received length check corresponding to the new
change.
Fixes: 4959aebba8 ("virtio-net: use mtu size as buffer length for big packets")
Cc: stable@vger.kernel.org
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Link: https://patch.msgid.link/20251030144438.7582-1-minhquangbui99@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mykyta Yatsenko says:
====================
bpf: Add _impl suffix for kfuncs with implicit args
We have established a pattern of function naming win "_impl" suffix;
those functions accept verifier-provided bpf_prog_aux argument.
Following uniform convention will allow for transparent backwards
compatibility with the upcoming KF_IMPLICIT_ARGS feature. This patch
set aims to fix current deviation from the convention to eliminate
unnecessary backwards incompatibility in the future.
Three kfuncs added in 6.18 don’t follow this *_impl convention and
therefore won’t participate in the new KF_IMPLICIT_ARGS mechanism:
* bpf_task_work_schedule_resume()
* bpf_task_work_schedule_signal()
* bpf_stream_vprintk()
Rename them to align with the implicit-arg flow:
bpf_task_work_schedule_resume() -> bpf_task_work_schedule_resume_impl()
bpf_task_work_schedule_signal() -> bpf_task_work_schedule_signal_impl()
bpf_stream_vprintk() -> bpf_stream_vprintk_impl()
The KF_IMPLICIT_ARGS mechanism is not in tree yet, so callers must
switch to the *_impl names for now. Once the new mechanism lands, the
plain names (without _impl) will be reintroduced.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Ihor Solodrai <ihor.solodrai@linux.dev>
---
Changes in v3:
- Fix commit messages
- Link to v2: https://lore.kernel.org/r/20251104-implv2-v2-0-6dbc35f39f28@meta.com
Changes in v1:
- Split commit into 2
- Rebase on the correct branch
- Link to v1: https://lore.kernel.org/all/20251103232319.122965-1-mykyta.yatsenko5@gmail.com/
====================
Link: https://patch.msgid.link/20251104-implv2-v3-0-4772b9ae0e06@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Rename bpf_stream_vprintk() to bpf_stream_vprintk_impl().
This makes bpf_stream_vprintk() follow the already established "_impl"
suffix-based naming convention for kfuncs with the bpf_prog_aux
argument provided by the verifier implicitly. This convention will be
taken advantage of with the upcoming KF_IMPLICIT_ARGS feature to
preserve backwards compatibility to BPF programs.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20251104-implv2-v3-2-4772b9ae0e06@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Rename:
bpf_task_work_schedule_resume()->bpf_task_work_schedule_resume_impl()
bpf_task_work_schedule_signal()->bpf_task_work_schedule_signal_impl()
This aligns task work scheduling kfuncs with the established naming
scheme for kfuncs with the bpf_prog_aux argument provided by the
verifier implicitly. This convention will be taken advantage of with the
upcoming KF_IMPLICIT_ARGS feature to preserve backwards compatibility to
BPF programs.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20251104-implv2-v3-1-4772b9ae0e06@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Michael Chan says:
====================
bnxt_en: Bug fixes
Patches 1, 3, and 4 are bug fixes related to the FW log tracing driver
coredump feature recently added in 6.13. Patch #1 adds the necessary
call to shutdown the FW logging DMA during PCI shutdown. Patch #3 fixes
a possible null pointer derefernce when using early versions of the FW
with this feature. Patch #4 adds the coredump header information
unconditionally to make it more robust.
Patch #2 fixes a possible memory leak during PTP shutdown. Patch #5
eliminates a dmesg warning when doing devlink reload.
====================
Link: https://patch.msgid.link/20251104005700.542174-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The existing code calls bnxt_cancel_reservations() after
bnxt_hwrm_func_drv_unrgtr() in bnxt_dl_reload_down().
bnxt_cancel_reservations() calls the FW and it will always fail since
the driver has already unregistered, triggering this warning:
bnxt_en 0000:0a:00.0 ens2np0: resc_qcaps failed
Fix it by calling bnxt_clear_reservations() which will skip the
unnecessary FW call since we have unregistered.
Fixes: 228ea8c187 ("bnxt_en: implement devlink dev reload driver_reinit")
Reviewed-by: Mohammad Shuab Siddique <mohammad-shuab.siddique@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Shantiprasad Shettar <shantiprasad.shettar@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20251104005700.542174-6-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While populating firmware host logging segments for the coredump, it is
possible for the FW command that flushes the segment to fail. When that
happens, the existing code will not update the max entry and entry size
in the segment header and this causes software that decodes the coredump
to skip the segment.
The segment most likely has already collected some DMA data, so always
update these 2 segment fields in the header to allow the decoder to
decode any data in the segment.
Fixes: 3c2179e663 ("bnxt_en: Add FW trace coredump segments to the coredump")
Reviewed-by: Shruti Parab <shruti.parab@broadcom.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20251104005700.542174-5-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With older FW, we may get the ASYNC_EVENT_CMPL_EVENT_ID_DBG_BUF_PRODUCER
for FW trace data type that has not been initialized. This will result
in a crash in bnxt_bs_trace_type_wrap(). Add a guard to check for a
valid magic_byte pointer before proceeding.
Fixes: 84fcd9449f ("bnxt_en: Manage the FW trace context memory")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Shruti Parab <shruti.parab@broadcom.com>
Signed-off-by: Gautam R A <gautam-r.a@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20251104005700.542174-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In bnxt_ptp_init(), when ptp_clock_register() fails, the driver is
not freeing the memory allocated for ptp_info->pin_config. Fix it
to unconditionally free ptp_info->pin_config in bnxt_ptp_free().
Fixes: caf3eedbcd ("bnxt_en: 1PPS support for 5750X family chips")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20251104005700.542174-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The netif_close() call in bnxt_shutdown() only stops packet DMA. There
may be FW DMA for trace logging (recently added) that will continue. If
we kexec to a new kernel, the DMA will corrupt memory in the new kernel.
Add bnxt_hwrm_func_drv_unrgtr() to unregister the driver from the FW.
This will stop the FW DMA. In case the call fails, call pcie_flr() to
reset the function and stop the DMA.
Fixes: 24d694aec1 ("bnxt_en: Allocate backing store memory for FW trace logs")
Reported-by: Jakub Kicinski <kicinski@meta.com>
Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20251104005700.542174-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The runtime-const infrastructure was never designed to handle the
modular case, because the constant fixup is only done at boot time for
core kernel code.
But by the time I used it for the x86-64 user space limit handling in
commit 86e6b1547b ("x86: fix user address masking non-canonical
speculation issue"), I had completely repressed that fact.
And it all happens to work because the only code that currently actually
gets inlined by modules is for the access_ok() limit check, where the
default constant value works even when not fixed up. Because at least I
had intentionally made it be something that is in the non-canonical
address space region.
But it's technically very wrong, and it does mean that at least in
theory, the use of 'access_ok()' + '__get_user()' can trigger the same
speculation issue with non-canonical addresses that the original commit
was all about.
The pattern is unusual enough that this probably doesn't matter in
practice, but very wrong is still very wrong. Also, let's fix it before
the nice optimized scoped user accessor helpers that Thomas Gleixner is
working on cause this pseudo-constant to then be more widely used.
This all came up due to an unrelated discussion with Mateusz Guzik about
using the runtime const infrastructure for names_cachep accesses too.
There the modular case was much more obviously broken, and Mateusz noted
it in his 'v2' of the patch series.
That then made me notice how broken 'access_ok()' had been in modules
all along. Mea culpa, mea maxima culpa.
Fix it by simply not using the runtime-const code in modules, and just
using the USER_PTR_MAX variable value instead. This is not
performance-critical like the core user accessor functions (get_user()
and friends) are.
Also make sure this doesn't get forgotten the next time somebody wants
to do runtime constant optimizations by having the x86 runtime-const.h
header file error out if included by modules.
Fixes: 86e6b1547b ("x86: fix user address masking non-canonical speculation issue")
Acked-by: Borislav Petkov <bp@alien8.de>
Acked-by: Sean Christopherson <seanjc@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Triggered-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/all/20251030105242.801528-1-mjguzik@gmail.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Changing alignment of header would mean it's no longer safe to cast a
2 byte aligned pointer between formats. Use two 16 bit fields to make
it 2 byte aligned as previously.
This fixes the performance regression since
commit ("virtio_net: enable gso over UDP tunnel support.") as it uses
virtio_net_hdr_v1_hash_tunnel which embeds
virtio_net_hdr_v1_hash. Pktgen in guest + XDP_DROP on TAP + vhost_net
shows the TX PPS is recovered from 2.4Mpps to 4.45Mpps.
Fixes: 56a06bd40f ("virtio_net: enable gso over UDP tunnel support.")
Cc: stable@vger.kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Link: https://patch.msgid.link/20251031060551.126-1-jasowang@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If cros_ec_keyb_register_matrix() isn't called (due to
`buttons_switches_only`) in cros_ec_keyb_probe(), `ckdev->idev` remains
NULL. An invalid memory access is observed in cros_ec_keyb_process()
when receiving an EC_MKBP_EVENT_KEY_MATRIX event in cros_ec_keyb_work()
in such case.
Unable to handle kernel read from unreadable memory at virtual address 0000000000000028
...
x3 : 0000000000000000 x2 : 0000000000000000
x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
input_event
cros_ec_keyb_work
blocking_notifier_call_chain
ec_irq_thread
It's still unknown about why the kernel receives such malformed event,
in any cases, the kernel shouldn't access `ckdev->idev` and friends if
the driver doesn't intend to initialize them.
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20251104070310.3212712-1-tzungbi@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The commit 4adc20ba95 ("ARM: dts: broadcom: rpi: Switch to V3D firmware
clock") causes a regression in arm64 developer setups, which stores the
kernel modules via NFS. Before this change the involved V3D clock provider
was builtin, but after this DT change the clk-raspberrypi is responsible
for V3D and for arm64/defconfig this driver is build as a kernel module.
In case these kernel modules are provided via NFS this takes too long and
the PM domain core give up before the clock driver could be loaded:
v3d fec00000.gpu: deferred probe timeout, ignoring dependency
So resolve this issue by making this critical driver builtin.
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/linux-arm-kernel/9ebda74e-e700-4fbe-bca5-382f92417a9c@sirena.org.uk/
Fixes: 4adc20ba95 ("ARM: dts: broadcom: rpi: Switch to V3D firmware clock")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20251104174518.11783-1-wahrenst@gmx.net
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Fix refcount leak in `smb2_set_path_attr` when path conversion fails.
Function `cifs_get_writable_path` returns `cfile` with its reference
counter `cfile->count` increased on success. Function `smb2_compound_op`
would decrease the reference counter for `cfile`, as stated in its
comment. By calling `smb2_rename_path`, the reference counter of `cfile`
would leak if `cifs_convert_path_to_utf16` fails in `smb2_set_path_attr`.
Fixes: 8de9e86c67 ("cifs: create a helper to find a writeable handle by path name")
Acked-by: Henrique Carvalho <henrique.carvalho@suse.com>
Signed-off-by: Shuhao Fu <sfual@cse.ust.hk>
Signed-off-by: Steve French <stfrench@microsoft.com>
Following fixes:
- Memory leak in bnxt GSI qp path
- Failure in irdma registering large MRs
- Failure to clean out the right CQ table entry in irdma
- Invalid vf_id in some cases
- Incorrect error unwind in EFA CQ create
- hns doesn't use the optimal cq/qp relationships for it's HW banks
- hns reports the wrong SGE size to userspace for its QPs
- Corruption of the hns work queue entries in some cases
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCaQoEZAAKCRCFwuHvBreF
YbdjAP9MfjyZvmOu5H7yqwdIgCNeduANVWbEzSXUEU6j5LRCywD+O5UnkPbHQ9ko
k+jo07V6Ra/FuTVmr1Wf/Nfa9JmPqwc=
=dnEg
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
- Memory leak in bnxt GSI qp path
- Failure in irdma registering large MRs
- Failure to clean out the right CQ table entry in irdma
- Invalid vf_id in some cases
- Incorrect error unwind in EFA CQ create
- hns doesn't use the optimal cq/qp relationships for it's HW banks
- hns reports the wrong SGE size to userspace for its QPs
- Corruption of the hns work queue entries in some cases
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
MAINTAINERS: Update irdma maintainers
RDMA/irdma: Fix vf_id size to u16 to avoid overflow
RDMA/hns: Remove an extra blank line
RDMA/hns: Fix wrong WQE data when QP wraps around
RDMA/hns: Fix the modification of max_send_sge
RDMA/hns: Fix recv CQ and QP cache affinity
RDMA/uverbs: Fix umem release in UVERBS_METHOD_CQ_CREATE
RDMA/irdma: Set irdma_cq cq_num field during CQ create
RDMA/irdma: Fix SD index calculation
RDMA/bnxt_re: Fix a potential memory leak in destroy_gsi_sqp
This is supposed to be "priv" but we accidentally pass "&priv" which is
an address in the stack and so it will lead to memory corruption when
the imx_sc_key_action() function is called. Remove the &.
Fixes: 768062fd12 ("Input: imx_sc_key - use devm_add_action_or_reset() to handle all cleanups")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/aQYKR75r2VMFJutT@stanley.mountain
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
If process is killed. the vm entity is stopped, submit pt update job
will trigger the error message "*ERROR* Trying to push to a killed
entity", job will not execute.
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 10c382ec6c)
Cc: stable@vger.kernel.org
Fix the flows for S0ix. There is no need to stop
rlc or reintialize PMFW in S0ix.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4659
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reported-by: Antheas Kapenekakis <lkml@antheas.dev>
Tested-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fd39b5a583)
Cc: <stable@vger.kernel.org> # c81f5cebe8: drm/amdgpu: Drop PMFW RLC notifier from amdgpu_device_suspend()
Cc: <stable@vger.kernel.org>
For S3 on vangogh, PMFW needs to be notified before the
driver powers down RLC. This already happens in smu_disable_dpms()
so drop the superfluous call in amdgpu_device_suspend().
Co-developed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 960e30a61e)
[Why & How]
This fixes the black screen issue on certain APUs with HDMI,
accompanied by the following messages:
amdgpu 0000:c4:00.0: amdgpu: [drm] Failed to setup vendor info
frame on connector DP-1: -22
amdgpu 0000:c4:00.0: [drm] Cannot find any crtc or sizes [drm]
Cannot find any crtc or sizes
Fixes: 489f0f600c ("drm/amd/display: Fix DVI-D/HDMI adapters")
Suggested-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 678c901443)
commit 978fa2f6d0 ("drm/amd/display: Use scaling for non-native
resolutions on eDP") started using the GPU scaler hardware to scale
when a non-native resolution was picked on eDP. This scaling was done
to fill the screen instead of maintain aspect ratio.
The idea was supposed to be that if a different scaling behavior is
preferred then the compositor would request it. The not following
aspect ratio behavior however isn't desirable, so adjust it to follow
aspect ratio and still try to fill screen.
Note: This will lead to black bars in some cases for non-native
resolutions. Compositors can request the previous behavior if desired.
Fixes: 978fa2f6d0 ("drm/amd/display: Use scaling for non-native resolutions on eDP")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4538
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 825df7ff4b)
Use the correct label to complete all cleanup work.
Fixes: 4d154b1ca5 ("drm/amd/pm: Add support for DPM policies")
Fixes: 25e82f2e2c ("drm/amd/pm: Add temperature metrics sysfs entry")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4c4c138a1c)
These were not set so soft recovery was inadvertantly
disabled.
Fixes: 6ac55eab4f ("drm/amdgpu: move reset support type checks into the caller")
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1972763505)
On big endian arm kernels, the arm optimized Curve25519 code produces
incorrect outputs and fails the Curve25519 test. This has been true
ever since this code was added.
It seems that hardly anyone (or even no one?) actually uses big endian
arm kernels. But as long as they're ostensibly supported, we should
disable this code on them so that it's not accidentally used.
Note: for future-proofing, use !CPU_BIG_ENDIAN instead of
CPU_LITTLE_ENDIAN. Both of these are arch-specific options that could
get removed in the future if big endian support gets dropped.
Fixes: d8f1308a02 ("crypto: arm/curve25519 - wire up NEON implementation")
Cc: stable@vger.kernel.org
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251104054906.716914-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Commit 2f13daee2a ("lib/crypto/curve25519-hacl64: Disable KASAN with
clang-17 and older") inadvertently disabled KASAN in curve25519-hacl64.o
for GCC unconditionally because clang-min-version will always evaluate
to nothing for GCC. Add a check for CONFIG_CC_IS_CLANG to avoid applying
the workaround for GCC, which is only needed for clang-17 and older.
Cc: stable@vger.kernel.org
Fixes: 2f13daee2a ("lib/crypto/curve25519-hacl64: Disable KASAN with clang-17 and older")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251103-curve25519-hacl64-fix-kasan-workaround-v2-1-ab581cbd8035@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
When unbinding a memslot from a guest_memfd instance, remove the bindings
even if the guest_memfd file is dying, i.e. even if its file refcount has
gone to zero. If the memslot is freed before the file is fully released,
nullifying the memslot side of the binding in kvm_gmem_release() will
write to freed memory, as detected by syzbot+KASAN:
==================================================================
BUG: KASAN: slab-use-after-free in kvm_gmem_release+0x176/0x440 virt/kvm/guest_memfd.c:353
Write of size 8 at addr ffff88807befa508 by task syz.0.17/6022
CPU: 0 UID: 0 PID: 6022 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/02/2025
Call Trace:
<TASK>
dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xca/0x240 mm/kasan/report.c:482
kasan_report+0x118/0x150 mm/kasan/report.c:595
kvm_gmem_release+0x176/0x440 virt/kvm/guest_memfd.c:353
__fput+0x44c/0xa70 fs/file_table.c:468
task_work_run+0x1d4/0x260 kernel/task_work.c:227
resume_user_mode_work include/linux/resume_user_mode.h:50 [inline]
exit_to_user_mode_loop+0xe9/0x130 kernel/entry/common.c:43
exit_to_user_mode_prepare include/linux/irq-entry-common.h:225 [inline]
syscall_exit_to_user_mode_work include/linux/entry-common.h:175 [inline]
syscall_exit_to_user_mode include/linux/entry-common.h:210 [inline]
do_syscall_64+0x2bd/0xfa0 arch/x86/entry/syscall_64.c:100
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fbeeff8efc9
</TASK>
Allocated by task 6023:
kasan_save_stack mm/kasan/common.c:56 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:77
poison_kmalloc_redzone mm/kasan/common.c:397 [inline]
__kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:414
kasan_kmalloc include/linux/kasan.h:262 [inline]
__kmalloc_cache_noprof+0x3e2/0x700 mm/slub.c:5758
kmalloc_noprof include/linux/slab.h:957 [inline]
kzalloc_noprof include/linux/slab.h:1094 [inline]
kvm_set_memory_region+0x747/0xb90 virt/kvm/kvm_main.c:2104
kvm_vm_ioctl_set_memory_region+0x6f/0xd0 virt/kvm/kvm_main.c:2154
kvm_vm_ioctl+0x957/0xc60 virt/kvm/kvm_main.c:5201
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0xfa0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 6023:
kasan_save_stack mm/kasan/common.c:56 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:77
kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:584
poison_slab_object mm/kasan/common.c:252 [inline]
__kasan_slab_free+0x5c/0x80 mm/kasan/common.c:284
kasan_slab_free include/linux/kasan.h:234 [inline]
slab_free_hook mm/slub.c:2533 [inline]
slab_free mm/slub.c:6622 [inline]
kfree+0x19a/0x6d0 mm/slub.c:6829
kvm_set_memory_region+0x9c4/0xb90 virt/kvm/kvm_main.c:2130
kvm_vm_ioctl_set_memory_region+0x6f/0xd0 virt/kvm/kvm_main.c:2154
kvm_vm_ioctl+0x957/0xc60 virt/kvm/kvm_main.c:5201
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0xfa0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Deliberately don't acquire filemap invalid lock when the file is dying as
the lifecycle of f_mapping is outside the purview of KVM. Dereferencing
the mapping is *probably* fine, but there's no need to invalidate anything
as memslot deletion is responsible for zapping SPTEs, and the only code
that can access the dying file is kvm_gmem_release(), whose core code is
mutually exclusive with unbinding.
Note, the mutual exclusivity is also what makes it safe to access the
bindings on a dying gmem instance. Unbinding either runs with slots_lock
held, or after the last reference to the owning "struct kvm" is put, and
kvm_gmem_release() nullifies the slot pointer under slots_lock, and puts
its reference to the VM after that is done.
Reported-by: syzbot+2479e53d0db9b32ae2aa@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/68fa7a22.a70a0220.3bf6c6.008b.GAE@google.com
Tested-by: syzbot+2479e53d0db9b32ae2aa@syzkaller.appspotmail.com
Fixes: a7800aa80e ("KVM: Add KVM_CREATE_GUEST_MEMFD ioctl() for guest-specific backing memory")
Cc: stable@vger.kernel.org
Cc: Hillf Danton <hdanton@sina.com>
Reviewed-By: Vishal Annapurve <vannapurve@google.com>
Link: https://patch.msgid.link/20251104011205.3853541-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use a raw spinlock for vcpu_svm.ir_list_lock as the lock can be taken
during schedule() via kvm_sched_out() => __avic_vcpu_put(), and "normal"
spinlocks are sleepable locks when PREEMPT_RT=y.
This fixes the following lockdep warning:
=============================
[ BUG: Invalid wait context ]
6.12.0-146.1640_2124176644.el10.x86_64+debug #1 Not tainted
-----------------------------
qemu-kvm/38299 is trying to lock:
ff11000239725600 (&svm->ir_list_lock){....}-{3:3}, at: __avic_vcpu_put+0xfd/0x300 [kvm_amd]
other info that might help us debug this:
context-{5:5}
2 locks held by qemu-kvm/38299:
#0: ff11000239723ba8 (&vcpu->mutex){+.+.}-{4:4}, at: kvm_vcpu_ioctl+0x240/0xe00 [kvm]
#1: ff11000b906056d8 (&rq->__lock){-.-.}-{2:2}, at: raw_spin_rq_lock_nested+0x2e/0x130
stack backtrace:
CPU: 1 UID: 0 PID: 38299 Comm: qemu-kvm Kdump: loaded Not tainted 6.12.0-146.1640_2124176644.el10.x86_64+debug #1 PREEMPT(voluntary)
Hardware name: AMD Corporation QUARTZ/QUARTZ, BIOS RQZ100AB 09/14/2023
Call Trace:
<TASK>
dump_stack_lvl+0x6f/0xb0
__lock_acquire+0x921/0xb80
lock_acquire.part.0+0xbe/0x270
_raw_spin_lock_irqsave+0x46/0x90
__avic_vcpu_put+0xfd/0x300 [kvm_amd]
svm_vcpu_put+0xfa/0x130 [kvm_amd]
kvm_arch_vcpu_put+0x48c/0x790 [kvm]
kvm_sched_out+0x161/0x1c0 [kvm]
prepare_task_switch+0x36b/0xf60
__schedule+0x4f7/0x1890
schedule+0xd4/0x260
xfer_to_guest_mode_handle_work+0x54/0xc0
vcpu_run+0x69a/0xa70 [kvm]
kvm_arch_vcpu_ioctl_run+0xdc0/0x17e0 [kvm]
kvm_vcpu_ioctl+0x39f/0xe00 [kvm]
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://patch.msgid.link/20251030194130.307900-1-mlevitsk@redhat.com
[sean: massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Make amd_iommu_register_ga_log_notifier() a local symbol now that it's
defined and used purely within avic.c.
No functional change intended.
Fixes: 4bdec12aa8 ("KVM: SVM: Detect X2APIC virtualization (x2AVIC) support")
Link: https://patch.msgid.link/20251016190643.80529-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Unregister the GALog notifier (used to get notified of wake events for
blocking vCPUs) on kvm-amd.ko exit so that a KVM or IOMMU driver bug that
results in a spurious GALog event "only" results in a spurious IRQ, and
doesn't trigger a use-after-free due to executing unloaded module code.
Fixes: 5881f73757 ("svm: Introduce AMD IOMMU avic_ga_log_notifier")
Reported-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Closes: https://lore.kernel.org/all/20250918130320.GA119526@k08j02272.eu95sqa
Link: https://patch.msgid.link/20251016190643.80529-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Setup the per-CPU SVM data structures at the very end of hardware setup so
that svm_hardware_unsetup() can be used in svm_hardware_setup() to unwind
AVIC setup (for the GALog notifier). Alternatively, the error path could
do an explicit, manual unwind, e.g. by adding a helper to free the per-CPU
structures. But the per-CPU allocations have no interactions or
dependencies, i.e. can comfortably live at the end, and so converting to
a manual unwind would introduce churn and code without providing any
immediate advantage.
Link: https://patch.msgid.link/20251016190643.80529-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Update the comment above is_xstate_managed_msr() to note that
MSR_IA32_S_CET isn't saved/restored by XSAVES/XRSTORS.
MSR_IA32_S_CET isn't part of CET_U/S state as the SDM states:
The register state used by Control-Flow Enforcement Technology (CET)
comprises the two 64-bit MSRs (IA32_U_CET and IA32_PL3_SSP) that manage
CET when CPL = 3 (CET_U state); and the three 64-bit MSRs
(IA32_PL0_SSP–IA32_PL2_SSP) that manage CET when CPL < 3 (CET_S state).
Opportunistically shift the snippet about the safety of loading certain
MSRs to the function comment for kvm_access_xstate_msr(), which is where
the MSRs are actually loaded into hardware.
Fixes: e44eb58334 ("KVM: x86: Load guest FPU state when access XSAVE-managed MSRs")
Signed-off-by: Chao Gao <chao.gao@intel.com>
Link: https://patch.msgid.link/20251028060142.29830-1-chao.gao@intel.com
[sean: shift snippet about safety to kvm_access_xstate_msr()]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Assert, via KVM_BUG_ON(), that guest FPU state isn't/is in use when
loading/putting the FPU to help detect KVM bugs without needing an assist
from KASAN. If an imbalanced load/put is detected, skip the redundant
load/put to avoid clobbering guest state and/or crashing the host.
Note, kvm_access_xstate_msr() already provides a similar assertion.
Reviewed-by: Yao Yuan <yaoyuan@linux.alibaba.com>
Reviewed-by: Chao Gao <chao.gao@intel.com>
Link: https://patch.msgid.link/20251030185802.3375059-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Replace the hack added by commit f958bd2314 ("KVM: x86: Fix potential
put_fpu() w/o load_fpu() on MPX platform") with a more robust approach of
unloading+reloading guest FPU state based on whether or not the vCPU's FPU
is currently in-use, i.e. currently loaded. This fixes a bug on hosts
that support CET but not MPX, where kvm_arch_vcpu_ioctl_get_mpstate()
neglects to load FPU state (it only checks for MPX support) and leads to
KVM attempting to put FPU state due to kvm_apic_accept_events() triggering
INIT emulation. E.g. on a host with CET but not MPX, syzkaller+KASAN
generates:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000004: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000020-0x0000000000000027]
CPU: 211 UID: 0 PID: 20451 Comm: syz.9.26 Tainted: G S 6.18.0-smp-DEV #7 NONE
Tainted: [S]=CPU_OUT_OF_SPEC
Hardware name: Google Izumi/izumi, BIOS 0.20250729.1-0 07/29/2025
RIP: 0010:fpu_swap_kvm_fpstate+0x3ce/0x610 ../arch/x86/kernel/fpu/core.c:377
RSP: 0018:ff1100410c167cc0 EFLAGS: 00010202
RAX: 0000000000000004 RBX: 0000000000000020 RCX: 00000000000001aa
RDX: 00000000000001ab RSI: ffffffff817bb960 RDI: 0000000022600000
RBP: dffffc0000000000 R08: ff110040d23c8007 R09: 1fe220081a479000
R10: dffffc0000000000 R11: ffe21c081a479001 R12: ff110040d23c8d98
R13: 00000000fffdc578 R14: 0000000000000000 R15: ff110040d23c8d90
FS: 00007f86dd1876c0(0000) GS:ff11007fc969b000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f86dd186fa8 CR3: 00000040d1dfa003 CR4: 0000000000f73ef0
PKRU: 80000000
Call Trace:
<TASK>
kvm_vcpu_reset+0x80d/0x12c0 ../arch/x86/kvm/x86.c:11818
kvm_apic_accept_events+0x1cb/0x500 ../arch/x86/kvm/lapic.c:3489
kvm_arch_vcpu_ioctl_get_mpstate+0xd0/0x4e0 ../arch/x86/kvm/x86.c:12145
kvm_vcpu_ioctl+0x5e2/0xed0 ../virt/kvm/kvm_main.c:4539
__se_sys_ioctl+0x11d/0x1b0 ../fs/ioctl.c:51
do_syscall_x64 ../arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x6e/0x940 ../arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f86de71d9c9
</TASK>
with a very simple reproducer:
r0 = openat$kvm(0xffffffffffffff9c, &(0x7f0000000000), 0x80b00, 0x0)
r1 = ioctl$KVM_CREATE_VM(r0, 0xae01, 0x0)
ioctl$KVM_CREATE_IRQCHIP(r1, 0xae60)
r2 = ioctl$KVM_CREATE_VCPU(r1, 0xae41, 0x0)
ioctl$KVM_SET_IRQCHIP(r1, 0x8208ae63, ...)
ioctl$KVM_GET_MP_STATE(r2, 0x8004ae98, &(0x7f00000000c0))
Alternatively, the MPX hack in GET_MP_STATE could be extended to cover CET,
but from a "don't break existing functionality" perspective, that isn't any
less risky than peeking at the state of in_use, and it's far less robust
for a long term solution (as evidenced by this bug).
Reported-by: Alexander Potapenko <glider@google.com>
Fixes: 69cc3e8865 ("KVM: x86: Add XSS support for CET_KERNEL and CET_USER")
Reviewed-by: Yao Yuan <yaoyuan@linux.alibaba.com>
Reviewed-by: Chao Gao <chao.gao@intel.com>
Link: https://patch.msgid.link/20251030185802.3375059-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
of_get_child_by_name() returns a node pointer with refcount incremented, we
should use of_node_put() on it when not needed anymore. Add the missing
of_node_put() to avoid refcount leak.
Fixes: 721cabf6c6 ("soc: imx: move PGC handling to a new GPC driver")
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Limit the workaround for the lack of the proper splash-screen handover
handling to the legacy ARM 32bit systems and replace forcing a sync_state
by explicite power domain shutdown. This approach lets compiler to
optimize it out on newer ARM 64bit systems.
Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
Fixes: 0745658aeb ("pmdomain: samsung: Fix splash-screen handover by enforcing a sync_state")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
RFC 7862 Section 4.1.2 says that if the server supports CLONE it MUST
support clone_blksize attribute.
Fixes: d6ca7d2643 ("NFSD: Implement FATTR4_CLONE_BLKSIZE attribute")
Cc: stable@vger.kernel.org
Signed-off-by: Olga Kornievskaia <okorniev@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
nfsd exports a "pseudo root filesystem" which is used by NFSv4 to find
the various exported filesystems using LOOKUP requests from a known root
filehandle. NFSv3 uses the MOUNT protocol to find those exported
filesystems and so is not given access to the pseudo root filesystem.
If a v3 (or v2) client uses a filehandle from that filesystem,
nfsd_set_fh_dentry() will report an error, but still stores the export
in "struct svc_fh" even though it also drops the reference (exp_put()).
This means that when fh_put() is called an extra reference will be dropped
which can lead to use-after-free and possible denial of service.
Normal NFS usage will not provide a pseudo-root filehandle to a v3
client. This bug can only be triggered by the client synthesising an
incorrect filehandle.
To fix this we move the assignments to the svc_fh later, after all
possible error cases have been detected.
Reported-and-tested-by: tianshuo han <hantianshuo233@gmail.com>
Fixes: ef7f6c4904 ("nfsd: move V4ROOT version check to nfsd_set_fh_dentry()")
Signed-off-by: NeilBrown <neil@brown.name>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
find_or_create_cached_dir() could grab a new reference after kref_put()
had seen the refcount drop to zero but before cfid_list_lock is acquired
in smb2_close_cached_fid(), leading to use-after-free.
Switch to kref_put_lock() so cfid_release() is called with
cfid_list_lock held, closing that gap.
Fixes: ebe98f1447 ("cifs: enable caching of directories for which a lease is held")
Cc: stable@vger.kernel.org
Reported-by: Jay Shin <jaeshin@redhat.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Current ksmbd_rdma_capable_netdev fails to mark certain RDMA-capable
inerfaces such as IPoIB as RDMA capable after reverting GUID matching code
due to layer violation.
This patch check the ARPHRD_INFINIBAND type safely identifies an IPoIB
interface without introducing a layer violation, ensuring RDMA
functionality is correctly enabled for these interfaces.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
If user set bridge interface as actual RDMA-capable NICs are lower devices,
ksmbd can not detect as RDMA capable. This patch can detect the RDMA
capable lower devices from bridge master or VLAN. With this change, ksmbd
can accept both TCP and RDMA connections through the same bridge IP
address, allowing mixed transport operation without requiring separate
interfaces.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Since snd_soc_suspend() is invoked through snd_soc_pm_ops->suspend(),
and snd_soc_pm_ops is associated with the soc_driver (defined in
sound/soc/soc-core.c), and there is no parent-child relationship between
the soc_driver and the DA7213 codec driver, the power management subsystem
does not enforce a specific suspend/resume order between the DA7213 driver
and the soc_driver.
Because of this, the different codec component functionalities, called from
snd_soc_resume() to reconfigure various functions, can race with the
DA7213 struct dev_pm_ops::resume function, leading to misapplied
configuration. This occasionally results in clipped sound.
Fix this by dropping the struct dev_pm_ops::{suspend, resume} and use
instead struct snd_soc_component_driver::{suspend, resume}. This ensures
the proper configuration sequence is handled by the ASoC subsystem.
Cc: stable@vger.kernel.org
Fixes: 431e040065 ("ASoC: da7213: Add suspend to RAM support")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20251104114914.2060603-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Guenter Roeck reported this kernel crash on his emulated B160L machine:
Starting network: udhcpc: started, v1.36.1
Backtrace:
[<104320d4>] unwind_once+0x1c/0x5c
[<10434a00>] walk_stackframe.isra.0+0x74/0xb8
[<10434a6c>] arch_stack_walk+0x28/0x38
[<104e5efc>] stack_trace_save+0x48/0x5c
[<105d1bdc>] set_track_prepare+0x44/0x6c
[<105d9c80>] ___slab_alloc+0xfc4/0x1024
[<105d9d38>] __slab_alloc.isra.0+0x58/0x90
[<105dc80c>] kmem_cache_alloc_noprof+0x2ac/0x4a0
[<105b8e54>] __anon_vma_prepare+0x60/0x280
[<105a823c>] __vmf_anon_prepare+0x68/0x94
[<105a8b34>] do_wp_page+0x8cc/0xf10
[<105aad88>] handle_mm_fault+0x6c0/0xf08
[<10425568>] do_page_fault+0x110/0x440
[<10427938>] handle_interruption+0x184/0x748
[<11178398>] schedule+0x4c/0x190
BUG: spinlock recursion on CPU#0, ifconfig/2420
lock: terminate_lock.2+0x0/0x1c, .magic: dead4ead, .owner: ifconfig/2420, .owner_cpu: 0
While creating the stack trace, the unwinder uses the stack pointer to guess
the previous frame to read the previous stack pointer from memory. The crash
happens, because the unwinder tries to read from unaligned memory and as such
triggers the unalignment trap handler which then leads to the spinlock
recursion and finally to a deadlock.
Fix it by checking the alignment before accessing the memory.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: stable@vger.kernel.org # v6.12+
