This will be useful for the next patches in the series since port number
is needed for optional counters binding and unbinding.
Note that this change is needed since when the operation is done qp->port
isn't necessarily initialized yet and can't be used.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/b6f6797844acbd517358e8d2a270ea9b3e6ecba1.1741875070.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Whenever a new counter is created, save inside it the user requested
configuration for optional-counters binding, for manual configuration it
is requested directly by the user and for the automatic configuration it
depends on if the automatic binding was enabled with or without
optional-counters binding.
This argument will later be used by the driver to determine if to bind the
optional-counters as well or not when trying to bind this counter to a QP.
It indicates that when binding counters to a QP we also want the
currently enabled link optional-counters to be bound as well.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/82f1c357606a16932979ef9a5910122675c74a3a.1741875070.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Change rdma_counter allocation to use rdma_zalloc_drv_obj() instead of,
explicitly allocating at core, in order to be contained inside driver
specific structures.
Adjust all drivers that use it to have their containing structure, and
add driver specific initialization operation.
This change is needed to allow upcoming patches to implement
optional-counters binding whereas inside each driver specific counter
struct his bound optional-counters will be maintained.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/a5a484f421fc2e5595158e61a354fba43272b02d.1741875070.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Add the following optional counters:
rdma_tx_packets,rdma_rx_bytes,rdma_rx_packets,rdma_tx_bytes.
Which counts all RDMA packets/bytes sent and received per link.
Note that since each direction packet and byte counter are shared,
the counter is only reset when both counters of that direction
are removed. But from user-perspective each can be enabled/disabled separately.
The counters can be enabled using:
sudo rdma stat set link rocep8s0f0/1 optional-counters rdma_tx_packets
And can be seen using:
rdma stat -j show link rocep8s0f0/1
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/9f2753ad636f21704416df64b47395c8991d1123.1741875070.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Registering the interrupts for TX or RX DMA Channels prior to registering
their respective NAPI callbacks can result in a NULL pointer dereference.
This is seen in practice as a random occurrence since it depends on the
randomness associated with the generation of traffic by Linux and the
reception of traffic from the wire.
Fixes: 681eb2beb3 ("net: ethernet: ti: am65-cpsw: ensure proper channel cleanup in error path")
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Co-developed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://patch.msgid.link/20250311154259.102865-1-s-vadapalli@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Doing this allows using registers as retrieved from an mcontext to be
pushed to a process using PTRACE_SETREGS.
It is not entirely clear to me why CSGSFS was masked. Doing so creates
issues when using the mcontext as process state in seccomp and simply
copying the register appears to work perfectly fine for ptrace.
Signed-off-by: Benjamin Berg <benjamin@sipsolutions.net>
Link: https://patch.msgid.link/20250224181827.647129-2-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
1. Add pin controller drivers for newly usptreamed Samsung Exynos2200
and Exynos7870.
2. Correct filter configuration offset of some of Google GS101 SoC pin
banks, which later is supposed to be used during system
suspend/resume.
-----BEGIN PGP SIGNATURE-----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=H+LK
-----END PGP SIGNATURE-----
Merge tag 'samsung-pinctrl-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung into devel
Samsung pinctrl drivers changes for v6.15
1. Add pin controller drivers for newly usptreamed Samsung Exynos2200
and Exynos7870.
2. Correct filter configuration offset of some of Google GS101 SoC pin
banks, which later is supposed to be used during system
suspend/resume.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Decouple virt-pci and virtio_pcidev, refactoring virtio_pcidev into
its own module. Define a set of APIs for virt-pci. This allows for
future addition of more PCI emulation implementations.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20250315161910.4082396-3-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
sched_yield by a userspace may not actually cause scheduling in
time-travel mode as no time has passed. In the case seen it appears to
be a badly implemented userspace spinlock in ASAN. Unfortunately, with
time-travel it causes an extreme slowdown or even deadlock depending on
the kernel configuration (CONFIG_UML_MAX_USERSPACE_ITERATIONS).
Work around it by accounting time to the process whenever it executes a
sched_yield syscall.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20250314130815.226872-1-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Minimum version of binutils required to compile the kernel is 2.25.
This version correctly handles the "lock" prefix, so it is possible
to remove the semicolon, which was used to support ancient versions
of GNU as.
Due to the semicolon, the compiler considers "lock; insn" as two
separate instructions. Removing the semicolon makes asm length
calculations more accurate, consequently making scheduling and
inlining decisions of the compiler more accurate.
Removing the semicolon also enables assembler checks involving lock
prefix. Trying to assemble e.g. "lock andl %eax, %ebx" results in:
Error: expecting lockable instruction after `lock'
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://patch.msgid.link/20250228090058.2499163-1-ubizjak@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When uml_reserved is updated, min_low_pfn must also be updated
accordingly. Otherwise, min_low_pfn will not accurately reflect
the lowest available PFN.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20250221041855.1156109-1-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Some file systems (e.g. ext4) may reuse inode numbers once the inode is
not in use anymore. Usually hostfs will keep an FD open for each inode,
but this is not always the case. In the case of sockets, this cannot
even be done properly.
As such, the following sequence of events was possible:
* application creates and deletes a socket
* hostfs creates/deletes the socket on the host
* inode is still in the hostfs cache
* hostfs creates a new file
* ext4 on the outside reuses the inode number
* hostfs finds the socket inode for the newly created file
* application receives -ENXIO when opening the file
As mentioned, this can only happen if the deleted file is a special file
that is never opened on the host (i.e. no .open fop).
As such, to prevent issues, it is sufficient to check that the inode
has the expected type. That said, also add a check for the inode birth
time, just to be on the safe side.
Fixes: 74ce793bcb ("hostfs: Fix ephemeral inodes")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Mickaël Salaün <mic@digikod.net>
Tested-by: Mickaël Salaün <mic@digikod.net>
Link: https://patch.msgid.link/20250214092822.1241575-1-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Instead of dynamically allocating the pointer to the vdso page during
boot, we can just allocate it statically. Doing so will reduce error
handling and make the code slightly more readable.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Link: https://patch.msgid.link/20250212045756.164977-1-tiwei.btw@antgroup.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There is no need to override the default version of this function
anymore as UML now has proper _nofault memory access functions.
Doing this also fixes the fact that the implementation was incorrect as
using mincore() will incorrectly flag pages as inaccessible if they were
swapped out by the host.
Fixes: f75b1b1bed ("um: Implement probe_kernel_read()")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20250210160926.420133-3-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Mark read-only data actually read-only (simple mprotect), and
to be able to test it also implement _nofault accesses. This
works by setting up a new "segv_continue" pointer in current,
and then when we hit a segfault we change the signal return
context so that we continue at that address. The code using
this sets it up so that it jumps to a label and then aborts
the access that way, returning -EFAULT.
It's possible to optimize the ___backtrack_faulted() thing by
using asm goto (compiler version dependent) and/or gcc's (not
sure if clang has it) &&label extension, but at least in one
attempt I made the && caused the compiler to not load -EFAULT
into the register in case of jumping to the &&label from the
fault handler. So leave it like this for now.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Co-developed-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20250210160926.420133-2-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In order to work around some issues with disabling SSE on older versions
of gcc (compilation would fail upon seeing a function declaration
containing a float, even if it was never called or defined), the
corresponding CFLAGS and RUSTFLAGS were only set when using clang.
However, this led to two problems:
- Newer gcc versions also wouldn't get the correct flags, despite not
having the bug.
- The RUSTFLAGS for setting the rust target definition were not set,
despite being unrelated. This works by chance for x86_64, as the
built-in default target is close enough, but not for 32-bit x86.
Move the target definition outside the conditional block, and update the
condition to take into account the gcc version.
Fixes: a3046a618a ("um: Only disable SSE on clang to work around old GCC bugs")
Signed-off-by: David Gow <davidgow@google.com>
Link: https://patch.msgid.link/20250210105353.2238769-2-davidgow@google.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Tariq Toukan says:
====================
mlx5: Support setting a parent for a devlink rate node
This series by Carolina adds mlx5 support for the setting of a parent to
devlink rate nodes.
By introducing a hierarchical level to scheduling nodes, these changes
allow for more granular control over bandwidth allocation and isolation
of Virtual Functions.
Function renaming for parent setting on leafs:
- net/mlx5: Rename devlink rate parent set function for leaf nodes
Add support for hierarchy level tracking:
- net/mlx5: Introduce hierarchy level tracking on scheduling nodes
- net/mlx5: Preserve rate settings when creating a rate node
Support setting parent for rate nodes:
- net/mlx5: Add support for setting parent of nodes
====================
Link: https://patch.msgid.link/1741642016-44918-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce `mlx5_esw_devlink_rate_node_parent_set()` to allow assigning
a parent to scheduling nodes.
Implement `mlx5_esw_qos_node_update_parent()` and
`mlx5_esw_qos_node_validate_set_parent()` to enforce constraints on
node reassignment.
Don't allow reassignment of nodes with active rate objects.
Update `esw_qos_node_set_parent()` to handle cases where
the parent is NULL. A NULL parent indicates that the scheduling element
is attached to the root scheduling element, and since only rate nodes
can be connected to the root, this update is now necessary.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1741642016-44918-5-git-send-email-tariqt@nvidia.com
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Modify `esw_qos_create_node_sched_elem()` to receive max_rate and
bw_share values while maintaining the previous configuration.
This change is essential for the upcoming patch that will modify rate
nodes and requires the existing settings to be preserved unless
explicitly changed.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1741642016-44918-4-git-send-email-tariqt@nvidia.com
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a `level` field to `mlx5_esw_sched_node` to track the hierarchy
depth of each scheduling node. This allows enforcement of the
scheduling depth constraints based on `log_esw_max_sched_depth`.
Modify `esw_qos_node_set_parent()` and `__esw_qos_alloc_node()` to
correctly assign hierarchy levels. Ensure that nodes inherit their
parent’s level incrementally.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1741642016-44918-3-git-send-email-tariqt@nvidia.com
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Rename `mlx5_esw_devlink_rate_parent_set()` to
`mlx5_esw_devlink_rate_leaf_parent_set()` to distinguish setting a
parent for leafs from nodes, which is not yet supported.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1741642016-44918-2-git-send-email-tariqt@nvidia.com
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch resolves an issue where RF calibration data from a
file could not be downloaded to the firmware. The feature to
download calibration data from a file was broken by the commit:
d39fbc8895.
The issue arose because the function `mwifiex_cmd_cfg_data()`
was modified in a way that prevented proper handling of
file-based calibration data. While this patch restores the ability
to download RF calibration data from a file, it may inadvertently
break the feature to download calibration data from the device
tree. This is because the function `mwifiex_dnld_dt_cfgdata()`,
which also relies on `mwifiex_cmd_cfg_data()`, is still used for
device tree-based calibration data downloads.
Fixes: d39fbc8895 ("mwifiex: remove cfg_data construction")
Signed-off-by: Jeff Chen <jeff.chen_1@nxp.com>
Link: https://patch.msgid.link/20250318050739.2239376-3-jeff.chen_1@nxp.com
[add newline for shorter lines]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This patch resolves an issue where RF calibration data was being
released before the download process. Without this fix, the
external calibration data file would not be downloaded
at all.
Fixes: d39fbc8895 ("mwifiex: remove cfg_data construction")
Signed-off-by: Jeff Chen <jeff.chen_1@nxp.com>
Link: https://patch.msgid.link/20250318050739.2239376-2-jeff.chen_1@nxp.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When userspace sets supported rates for a new station via
NL80211_CMD_NEW_STATION, it might send a list that's empty
or contains only invalid values. Currently, we process these
values in sta_link_apply_parameters() without checking the result of
ieee80211_parse_bitrates(), which can lead to an empty rates bitmap.
A similar issue was addressed for NL80211_CMD_SET_BSS in commit
ce04abc3fc ("wifi: mac80211: check basic rates validity").
This patch applies the same approach in sta_link_apply_parameters()
for NL80211_CMD_NEW_STATION, ensuring there is at least one valid
rate by inspecting the result of ieee80211_parse_bitrates().
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: b95eb7f0ee ("wifi: cfg80211/mac80211: separate link params from station params")
Signed-off-by: Mikhail Lobanov <m.lobanov@rosa.ru>
Link: https://patch.msgid.link/20250317103139.17625-1-m.lobanov@rosa.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There's some confusing indentation, I thought even that braces
were missing. Fix indentation here.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This patch addresses an issue where, despite the AP supporting 40MHz
bandwidth, the connection was limited to 20MHz. Without this fix,
even if the access point supports 40MHz, the bandwidth after
connection remains at 20MHz. This issue is not a regression.
Signed-off-by: Jeff Chen <jeff.chen_1@nxp.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20250314094238.2097341-1-jeff.chen_1@nxp.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
iwl_mld_remove_link removes the link from both the FW and from the
driver.
If removing it from the FW failed, we assume that the FW is
dead anyway and remove it from the driver as well.
On the other hand, we still return an error value, indicating the caller
(i.e. mac80211) that the link couldn't be removed - while it was
actually removed.
Later, mac80211 might tell the driver again to remove that link,
and then the driver will warn that it doesn't exist.
Fix this by making iwl_mld_remove_link a void function.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250313002008.16fe6ebae412.If5371ff7e096b7078ff9e98ff0e72010cd1f076d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Michael Chan says:
====================
bnxt_en: Driver update
This patchset contains these updates to the driver:
1. New ethtool coredump type for FW to include cached context for live dump.
2. Support ENABLE_ROCE devlink generic parameter.
3. Support capability change flag from FW.
4. FW interface update.
5. Support .set_module_eeprom_by_page().
====================
Link: https://patch.msgid.link/20250310183129.3154117-1-michael.chan@broadcom.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In preparation for adding .set_module_eeprom_by_page(), extract the
common error checking done in bnxt_get_module_eeprom_by_page() into
a new common function that can be re-used for
.set_module_eeprom_by_page().
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250310183129.3154117-7-michael.chan@broadcom.com
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The main changes are adding i2c write for module eeprom and a new v2
PCIe statistics structure.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250310183129.3154117-6-michael.chan@broadcom.com
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Newer FW can set the CAPS_CHANGE flag during ifup if some capabilities
or configurations have changed. For example, the CoS queue
configurations may have changed. Support this new flag by treating it
almost like FW reset. The driver will essentially rediscover all
features and capabilities, reconfigure all backing store context memory,
reset everything to default, and reserve all resources.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: shantiprasad shettar <shantiprasad.shettar@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250310183129.3154117-5-michael.chan@broadcom.com
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add set/show support for the ENABLE_ROCE NVM parameter to
enable/disable RoCE for a PF.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Co-developed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250310183129.3154117-4-michael.chan@broadcom.com
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
bnxt_hwrm_nvm_req() first searches the nvm_params[] array for the
NVM parameter to set or get. The array entry contains all the
NVM information about that parameter. The information is then used
to send the FW message to set or get the parameter.
Refactor it to only do the array search in bnxt_hwrm_nvm_req() and
pass the array entry to the new function __bnxt_hwrm_nvm_req() to
send the FW message. The next patch will be able to use the new
function.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250310183129.3154117-3-michael.chan@broadcom.com
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When doing a live coredump with ethtool -w, the context data cached
in the NIC is not dumped by the FW by default. The reason is that
retrieving this cached context data with traffic running may cause
problems. Add a new dump flag 3 to allow the option to include this
cached context data which may be useful in some debug scenarios.
Reviewed-by: Hongguang Gao <hongguang.gao@broadcom.com>
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com>
Signed-off-by: Vasuthevan Maheswaran <vasuthevan.maheswaran@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250310183129.3154117-2-michael.chan@broadcom.com
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-03-10 (ice, ixgbe)
For ice:
Paul adds generic checksum support for E830 devices.
Karol refactors PTP code related to E825C; simplifying PHY register info
struct, utilizing GENMASK, removing unused defines, etc.
For ixgbe:
Piotr adds PTP support for E610 devices.
Jedrzej adds reporting when overheating is detected on E610 devices.
The following are changes since commit 8ef890df40:
net: move misc netdev_lock flavors to a separate header
and are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue 100GbE
====================
Link: https://patch.msgid.link/20250310174502.3708121-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
E610 NICs unlike the previous devices utilising ixgbe driver
are notified in the case of overheating by the FW ACI event.
In event of overheat when threshold is exceeded, FW suspends all
traffic and sends overtemp event to the driver. Then driver
logs appropriate message and disables the adapter instance.
The card remains in that state until the platform is rebooted.
This approach is a solution to the fact current version of the
E610 FW doesn't support reading thermal sensor data by the
SW. So give to user at least any info that overtemp event
has occurred, without interface disappearing from the OS
without any note.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Jeremiah Lokan <jeremiahx.j.lokan@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250310174502.3708121-7-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add PTP support for E610 adapter. The E610 is based on X550 and adds
firmware managed link, enhanced security capabilities and support for
updated server manageability. It does not introduce any new PTP features
compared to X550.
Reviewed-by: Milena Olech <milena.olech@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Tested-by: Bharath R <bharath.r@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250310174502.3708121-6-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Minor PTP register refactor, including logical grouping E825C 1-step
timestamping registers. Remove unused register definitions
(PHY_REG_GPCS_BITSLIP, PHY_REG_REVISION).
Also, apply preferred GENMASK macro (instead of ICE_M) for register
fields definition affected by this patch.
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250310174502.3708121-5-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Simplify ice_phy_reg_info_eth56g struct definition to include base
address for the very first quad. Use base address info and 'step'
value to determine address for specific PHY quad.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250310174502.3708121-4-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Refactor the code by changing ice_ptp_init_phc_eth56g function
name to ice_ptp_init_phc_e825, to be consistent with the naming pattern
for other devices.
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250310174502.3708121-3-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>