Commit graph

1,403,262 commits

Author SHA1 Message Date
Paul Greenwalt
905d1a220e ice: Add E830 checksum offload support
E830 supports raw receive and generic transmit checksum offloads.

Raw receive checksum support is provided by hardware calculating the
checksum over the whole packet, regardless of type. The calculated
checksum is provided to driver in the Rx flex descriptor. Then the driver
assigns the checksum to skb->csum and sets skb->ip_summed to
CHECKSUM_COMPLETE.

Generic transmit checksum support is provided by hardware calculating the
checksum given two offsets: the start offset to begin checksum calculation,
and the offset to insert the calculated checksum in the packet. Support is
advertised to the stack using NETIF_F_HW_CSUM feature.

E830 has the following limitations when both generic transmit checksum
offload and TCP Segmentation Offload (TSO) are enabled:

1. Inner packet header modification is not supported. This restriction
   includes the inability to alter TCP flags, such as the push flag. As a
   result, this limitation can impact the receiver's ability to coalesce
   packets, potentially degrading network throughput.
2. The Maximum Segment Size (MSS) is limited to 1023 bytes, which prevents
   support of Maximum Transmission Unit (MTU) greater than 1063 bytes.

Therefore NETIF_F_HW_CSUM and NETIF_F_ALL_TSO features are mutually
exclusive. NETIF_F_HW_CSUM hardware feature support is indicated but is not
enabled by default. Instead, IP checksums and NETIF_F_ALL_TSO are the
defaults. Enforcement of mutual exclusivity of NETIF_F_HW_CSUM and
NETIF_F_ALL_TSO is done in ice_set_features(). Mutual exclusivity
of IP checksums and NETIF_F_HW_CSUM is handled by netdev_fix_features().

When NETIF_F_HW_CSUM is requested the provided skb->csum_start and
skb->csum_offset are passed to hardware in the Tx context descriptor
generic checksum (GCS) parameters. Hardware calculates the 1's complement
from skb->csum_start to the end of the packet, and inserts the result in
the packet at skb->csum_offset.

Co-developed-by: Alice Michael <alice.michael@intel.com>
Signed-off-by: Alice Michael <alice.michael@intel.com>
Co-developed-by: Eric Joyner <eric.joyner@intel.com>
Signed-off-by: Eric Joyner <eric.joyner@intel.com>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250310174502.3708121-2-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18 10:15:49 +01:00
Guo Ren
d9708b1931
riscv: Implement smp_cond_load8/16() with Zawrs
RISC-V code uses the queued spinlock implementation, which calls
the macros smp_cond_load_acquire for one byte. So, complement the
implementation of byte and halfword versions.

Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Guo Ren <guoren@kernel.org>
Cc: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20241217013910.1039923-1-guoren@kernel.org
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
2025-03-18 09:12:45 +00:00
Alexandre Ghiti
d9be2b9b60
riscv: Call secondary mmu notifier when flushing the tlb
This is required to allow the IOMMU driver to correctly flush its own
TLB.

Reviewed-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20250113142424.30487-1-alexghiti@rivosinc.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
2025-03-18 09:11:43 +00:00
Niklas Cassel
f2aac4c73c ata: libata-core: Add ATA_QUIRK_NO_LPM_ON_ATI for certain Samsung SSDs
Before commit 7627a0edef ("ata: ahci: Drop low power policy board type")
the ATI AHCI controllers specified board type 'board_ahci' rather than
board type 'board_ahci'. This means that LPM was historically not enabled
for the ATI AHCI controllers.

By looking at commit 7a8526a5cd ("libata: Add ATA_HORKAGE_NO_NCQ_ON_ATI
for Samsung 860 and 870 SSD."), it is clear that, for some unknown reason,
that Samsung SSDs do not play nice with ATI AHCI controllers. (When using
other AHCI controllers, NCQ can be enabled on these Samsung SSDs without
issues.)

In a similar way, from user reports, it is clear the ATI AHCI controllers
can enable LPM on e.g. Maxtor HDDs perfectly fine, but when enabling LPM
on certain Samsung SSDs, things break. (E.g. the SSDs will not get detected
by the ATI AHCI controller even after a COMRESET.)

Yet, when using LPM on these Samsung SSDs with other AHCI controllers, e.g.
Intel AHCI controllers, these Samsung drives appear to work perfectly fine.

Considering that the combination of ATI + Samsung, for some unknown reason,
does not seem to work well, disable LPM when detecting an ATI AHCI
controller with a problematic Samsung SSD.

Apply this new ATA_QUIRK_NO_LPM_ON_ATI quirk for all Samsung SSDs that have
already been reported to not play nice with ATI (ATA_QUIRK_NO_NCQ_ON_ATI).

Fixes: 7627a0edef ("ata: ahci: Drop low power policy board type")
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Reported-by: Eric <eric.4.debian@grabatoulnz.fr>
Closes: https://lore.kernel.org/linux-ide/Z8SBZMBjvVXA7OAK@eldamar.lan/
Tested-by: Eric <eric.4.debian@grabatoulnz.fr>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250317170348.1748671-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
2025-03-18 10:11:28 +01:00
Miquel Sabaté Solà
4458b8f68d
riscv: hwprobe: export Zicntr and Zihpm extensions
Export Zicntr and Zihpm ISA extensions through the hwprobe syscall.

[ alex: Fix hwprobe numbering ]

Signed-off-by: Miquel Sabaté Solà <mikisabate@gmail.com>
Acked-by: Jesse Taube <jesse@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240913051324.8176-1-mikisabate@gmail.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
2025-03-18 09:10:22 +00:00
Clément Léger
d3817d091f
riscv: remove useless pc check in stacktrace handling
Checking for pc to be a kernel text address at this location is useless
since pc == handle_exception. Remove this check.

[ alex: Fix merge conflict ]

Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240830084934.3690037-1-cleger@rivosinc.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
2025-03-18 09:06:21 +00:00
Andrew Bresticker
03dc00a2b6
riscv: Support huge pfnmaps
Use RSW0 as the special bit for pmds and puds, just like for ptes.
Also define the {pte,pmd,pud}_pgprot helpers which were previously
missing and are needed for the follow_pfnmap APIs.

Signed-off-by: Andrew Bresticker <abrestic@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250108135700.2614848-1-abrestic@rivosinc.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
2025-03-18 08:58:42 +00:00
Alexandre Ghiti
8df0cdcc21
Merge patch series "RISC-V: clarify what some RISCV_ISA* config options do & redo Zbb toolchain dependency"
Conor Dooley <conor@kernel.org> says:

Since one depends on the other, albeit trivially, here's a v4 of the Zbb
toolchain dep removal alongside the rewording of Kconfig options I'd
sent out before the merge window. I think I like this implementation
better than v1, but I couldn't think of a good name for a "public"
version of __ALTERNATIVE(), so I used it here directly.
Unfortunately "ALTERNATIVE_2_CFG" already exists and I couldn't think of
a good way to name an alternative macro that allows for several config
options that didn't make the distinction sufficiently clear.. Yell
if you have better suggestions than I did.

I am a wee bit "worried" that this makes the Kconfig option confusing as
it isn't immediately obvious if someone is or is not going to get the
toolchain based optimisations.

Cheers,
Conor.

* patches from https://lore.kernel.org/r/20241024-aspire-rectify-9982da6943e5@spud:
  RISC-V: separate Zbb optimisations requiring and not requiring toolchain support
  RISC-V: clarify what some RISCV_ISA* config options do

Link: https://lore.kernel.org/r/20241024-aspire-rectify-9982da6943e5@spud
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
2025-03-18 08:53:10 +00:00
Conor Dooley
9343aaba1f
RISC-V: separate Zbb optimisations requiring and not requiring toolchain support
It seems a bit ridiculous to require toolchain support for BPF to
assemble Zbb instructions, so move the dependency on toolchain support
for Zbb optimisations out of the Kconfig option and to the callsites.

Zbb support has always depended on alternatives, so while adjusting the
config options guarding optimisations, remove any checks for
whether or not alternatives are enabled.

Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20241024-chump-freebase-d26b6d81af33@spud
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
2025-03-18 08:53:02 +00:00
Conor Dooley
6216182fb7
RISC-V: clarify what some RISCV_ISA* config options do
During some discussion on IRC yesterday and on Pu's bpf patch [1]
I noticed that these RISCV_ISA* Kconfig options are not really clear
about their implications. Many of these options have no impact on what
userspace is allowed to do, for example an application can use Zbb
regardless of whether or not the kernel does. Change the help text to
try and clarify whether or not an option affects just the kernel, or
also userspace. None of these options actually control whether or not an
extension is detected dynamically as that's done regardless of Kconfig
options, so drop any text that implies the option is required for
dynamic detection, rewording them as "do x when y is detected".

Link: https://lore.kernel.org/linux-riscv/20240328-ferocity-repose-c554f75a676c@spud/ [1]
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20241024-overdue-slogan-0b0f69d3da91@spud
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
2025-03-18 08:53:02 +00:00
Miri Korenblit
2907c039ff wifi: iwlwifi: mld: KUnit: create chanctx with a custom width
Currently iwlmld_kunit_add_chanctx receives a band, picks a predefined
static chandef, and creates the chanctx from it.
Change it to receive a bandwidth as well. Otherwise, the bandwidth in
the chanctx/phy will be different than what test specified in the
iwl_mld_kunit_link.

Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250313002008.85a1285d34cd.Ia71cdcd4241fe73501bc93e3cb2c6bb3f631b9ec@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-18 09:51:25 +01:00
Miri Korenblit
de5ca699bc wifi: iwlwifi: mld: KUnit: introduce iwl_mld_kunit_link
To allow setting up association/EMLSR states with more flexibility,
change the relevant functions to receive a new struct, iwl_mld_kunit_link,
which will contain all the link parameters (for now just link id, band
and bandwidth).

Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250313002008.f336491ccc4e.I6b727765eb394a3dbb78cea71e356be1bdc4a17c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-18 09:51:25 +01:00
Miri Korenblit
c008fadb90 wifi: iwlwifi: mld: allow EMLSR for unequal bandwidth
Allow EMLSR if the bandwidths of the links are unequal if one of the
following conditions is true:
1. in low latency mode
2. bandwidth of the secondary link is greater than the bandwidth of the
   primary
3. the primary link is active and is loaded enough to justify EMLSR

Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250313002008.150c330711c4.Ifd72d2e076783991852a7f1756948b4f0efb9fea@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-18 09:51:25 +01:00
Miri Korenblit
008c04d53e wifi: iwlwifi: mld: prevent toggling EMLSR due to FW requests
We exit EMLSR mode if the FW requested to do so.
To prevent repeated toggling of the EMLSR mode (frequent entry and
exit), add this exit reason to the EMLSR prevention mechanism.
This mechanism avoids re-entering EMLSR for a certain period of time
after multiple exits caused by the same reason.

Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250313002008.f0e74a7f99af.I447c8788afba85a2a5040ae2c1213b6e05ec14f3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-18 09:51:25 +01:00
Miri Korenblit
4d7236f968 wifi: iwlwifi: mld: remove IWL_MLD_EMLSR_BLOCKED_FW
The channel load logic moves from the FW to the driver.
- Implement the logic: allow EMLSR only if the candidate primary link is
  active and if its average channel load exceeds the threshold.
- Remove IWL_MLD_EMLSR_BLOCKED_FW. Instead, treat ESR_RECOMMEND_LEAVE in
  the EMLSR_RECOMMENDATION notif as an EXIT reason.

Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250313002008.6729a8d67815.Iab39bf0982d8cdbb0db701d31854101c2fcf3b64@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-18 09:51:24 +01:00
Pagadala Yesu Anjaneyulu
b611cf6b57 wifi: iwlwifi: mld: add support for DHC_TOOLS_UMAC_GET_TAS_STATUS command
Add debugfs file in mld to retrieve TAS status per radio, TAS block list,
current mcc, OEM name and OEM allowed list. This will add ability to get
TAS status to user application via debugfs and required for debugging.

Add the required API definitions and some debug host command utils.

Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250313002008.66524c6ea198.I1625135284fc075148a55dd9ac629e94ca881fe4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-18 09:51:24 +01:00
Pagadala Yesu Anjaneyulu
8301e2636c wifi: iwlwifi: mld: Ensure wiphy lock is held during debugfs read operations
The WIPHY_DEBUGFS_READ_WRITE_FILE_OPS_MLD macro is intended to call
read/write handlers with the wiphy lock held. However, the current
implementation uses the MLD_DEBUGFS_READ_WRAPPER macro, which does
not hold the wiphy lock during read operations. This fix updates
the WIPHY_DEBUGFS_READ_WRITE_FILE_OPS_MLD macro to use the
WIPHY_DEBUGFS_READ_WRAPPER_MLD macro instead, ensuring that the
wiphy lock is held during both read and write operations.

Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250313002008.2001d2335e9d.I607a8bd12efc6d1190cef1fca44279dbdd2756ea@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-18 09:51:24 +01:00
Pagadala Yesu Anjaneyulu
4b8130a722 wifi: iwlwifi: mld: Add support for WIPHY_DEBUGFS_READ_FILE_OPS_MLD macro
Introduced the WIPHY_DEBUGFS_READ_FILE_OPS_MLD macro to enable reading
data from the driver while holding the wiphy lock.
This will enable read operations with wiphy locked.

Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250313002008.b0ddb6b0a144.I1fab63f2c6f52fea61cc5d7b27775aed58adfd8d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-18 09:51:24 +01:00
Pagadala Yesu Anjaneyulu
d4c6ca39d6 wifi: iwlwifi: mld: Rename WIPHY_DEBUGFS_HANDLER_WRAPPER to WIPHY_DEBUGFS_WRITE_HANDLER_WRAPPER
Renamed the macro WIPHY_DEBUGFS_HANDLER_WRAPPER to
WIPHY_DEBUGFS_WRITE_HANDLER_WRAPPER to better reflect its purpose as a
write handler.

Additionally, updated the corresponding macro
WIPHY_DEBUGFS_HANDLER_WRAPPER_MLD to
WIPHY_DEBUGFS_WRITE_HANDLER_WRAPPER_MLD for consistency.

This change does not alter the functionality but enhances the
maintainability of the code.

Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250313002008.bb8a1d7907c8.I53325f2f37ccaad2b212d35d10616e06c1555e48@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-18 09:51:24 +01:00
Aditya Kumar Singh
ea841520c5 wifi: nl80211: store chandef on the correct link when starting CAC
Link ID to store chandef is still being used as 0 even in case of MLO which
is incorrect. This leads to issue during CAC completion where link 0 as well
gets stopped.

Fixes: 0b7798232e ("wifi: cfg80211/mac80211: use proper link ID for DFS")
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Link: https://patch.msgid.link/20250314-fix_starting_cac_during_mlo-v1-1-3b51617d7ea5@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-18 09:51:03 +01:00
Bibo Mao
6bfb3a715d LoongArch: KVM: Register perf callbacks for guest
Add selection for GUEST_PERF_EVENTS if KVM is enabled, also add perf
callback register when KVM module is loading.

Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-03-18 16:48:08 +08:00
Bibo Mao
2bf463d761 LoongArch: KVM: Implement arch-specific functions for guest perf
Three architecture specific functions are added for the guest perf
feature, they are kvm_arch_vcpu_in_kernel(), kvm_arch_vcpu_get_ip()
and kvm_arch_pmi_in_guest().

Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-03-18 16:48:08 +08:00
Bibo Mao
6a16e448e5 LoongArch: KVM: Add stub for kvm_arch_vcpu_preempted_in_kernel()
Pause-Loop Exiting is not supported by LoongArch hardware, nor is pv
spinlock feature. So function kvm_vcpu_on_spin() is not used. Function
kvm_arch_vcpu_preempted_in_kernel() is defined as a stub function here
since it is only called by unused function kvm_vcpu_on_spin().

Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-03-18 16:48:08 +08:00
Bibo Mao
062ac0cb83 LoongArch: KVM: Remove PGD saving during VM context switch
PGD table for primary mmu keeps unchanged once VM is created, it is not
necessary to save PGD table pointer during VM context switch. And it can
be acquired when VM is created.

Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-03-18 16:48:08 +08:00
Masahiro Yamada
1c405b4217 LoongArch: KVM: Remove unnecessary header include path
arch/loongarch/kvm/ includes local headers with the double-quote form
(#include "..."). Also, TRACE_INCLUDE_PATH in arch/loongarch/kvm/trace.h
is relative to include/trace/.

Hence, the local header search path is unneeded.

Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2025-03-18 16:48:08 +08:00
Johannes Berg
c924c5e9b8 Merge net-next/main to resolve conflicts
There are a few conflicts between the work that went
into wireless and that's here now, resolve them.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-18 09:46:36 +01:00
Kunwu Chan
0b9817caac
rust: optimize rust symbol generation for SeqFile
When build the kernel using the llvm-18.1.3-rust-1.85.0-x86_64
with ARCH=arm64, the following symbols are generated:

$nm vmlinux | grep ' _R'.*SeqFile | rustfilt
ffff8000805b78ac T <kernel::seq_file::SeqFile>::call_printf

This Rust symbol is trivial wrappers around the C functions seq_printf.
It doesn't make sense to go through a trivial wrapper for its functions,
so mark it inline.

Link: https://github.com/Rust-for-Linux/linux/issues/1145
Suggested-by: Alice Ryhl <aliceryhl@google.com>
Co-developed-by: Grace Deng <Grace.Deng006@Gmail.com>
Signed-off-by: Grace Deng <Grace.Deng006@Gmail.com>
Signed-off-by: Kunwu Chan <kunwu.chan@hotmail.com>
Link: https://lore.kernel.org/r/20250317030418.2371265-1-kunwu.chan@linux.dev
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-03-18 09:26:24 +01:00
Kunwu Chan
e27b0e3c54
rust: file: optimize rust symbol generation for FileDescriptorReservation
When build the kernel using the llvm-18.1.3-rust-1.85.0-x86_64
with ARCH=arm64, the following symbols are generated:

$ nm vmlinux | grep ' _R'.*FileDescriptorReservation | rustfilt
... T <kernel::fs::file::FileDescriptorReservation>::fd_install
... T <kernel::fs::file::FileDescriptorReservation>::get_unused_fd_flags
... T <kernel::fs::file::FileDescriptorReservation as core::ops::drop::Drop>::drop

These Rust symbols are trivial wrappers around the C functions
fd_install, put_unused_fd and put_task_struct. It
doesn't make sense to go through a trivial wrapper for these
functions, so mark them inline.

Link: https://github.com/Rust-for-Linux/linux/issues/1145
Suggested-by: Alice Ryhl <aliceryhl@google.com>
Co-developed-by: Grace Deng <Grace.Deng006@Gmail.com>
Signed-off-by: Grace Deng <Grace.Deng006@Gmail.com>
Signed-off-by: Kunwu Chan <kunwu.chan@hotmail.com>
Link: https://lore.kernel.org/r/20250317023702.2360726-1-kunwu.chan@linux.dev
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-03-18 09:25:52 +01:00
Paolo Abeni
50698b298b Merge branch 'net-phy-rework-linkmodes-handling-in-a-dedicated-file'
Maxime Chevallier says:

====================
net: phy: Rework linkmodes handling in a dedicated file

This is V5 of the phy_caps series. In a nutshell, this series reworks the way
we maintain the list of speed/duplex capablities for each linkmode so that we
no longer have multiple definition of these associations.

That will help making sure that when people add new linkmodes in
include/uapi/linux/ethtool.h, they don't have to update phylib and phylink as
well, making the process more straightforward and less error-prone.

It also generalises the phy_caps interface to be able to lookup linkmodes
from phy_interface_t, which is needed for the multi-port work I've been working
on for a while.

This V5 addresse Russell's and Paolo's reviews, namely :

 - Error out when encountering an unknown SPEED_XXX setting

   It prints an error and fails to initialize phylib. I've tested by
   introducing a dummy 1.6T speed, I guess it's only a matter of time
   before that actually happens :)

 - Deal more gracefully with the fixed-link settings, keeping some level of
   compatibility with what we had before by making sure we report a
   single BaseT mode like before.

V1 : https://lore.kernel.org/netdev/20250222142727.894124-1-maxime.chevallier@bootlin.com/
V2 : https://lore.kernel.org/netdev/20250226100929.1646454-1-maxime.chevallier@bootlin.com/
V3 : https://lore.kernel.org/netdev/20250228145540.2209551-1-maxime.chevallier@bootlin.com/
V4 : https://lore.kernel.org/netdev/20250303090321.805785-1-maxime.chevallier@bootlin.com/
====================

Link: https://patch.msgid.link/20250307173611.129125-1-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18 09:03:18 +01:00
Niklas Cassel
b500ee5fde ata: libata: Fix NCQ Non-Data log not supported print
Currently, both ata_dev_config_ncq_send_recv() - which checks for NCQ
Send/Recv Log (Log Address 13h) and ata_dev_config_ncq_non_data() -
which checks for NCQ Non-Data Log (Log Address 12h), uses the same
print when the log is not supported:

  "NCQ Send/Recv Log not supported"

This seems like a copy paste error, since NCQ Non-Data Log is actually
a separate log.

Fix the print to reference the correct log.

Fixes: 284b3b77ea ("libata: NCQ encapsulation for ZAC MANAGEMENT OUT")
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20250317111754.1666084-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
2025-03-18 09:03:12 +01:00
Maxime Chevallier
3bd87f3b44 net: phylink: Use phy_caps to get an interface's capabilities and modes
Phylink has internal code to get the MAC capabilities of a given PHY
interface (what are the supported speed and duplex).

Extract that into phy_caps, but use the link_capa for conversion. Add an
internal phylink helper for the link caps -> mac caps conversion, and
use this in phylink_caps_to_linkmodes().

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250307173611.129125-14-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18 09:03:12 +01:00
Maxime Chevallier
4ca5b8a258 net: phylink: Convert capabilities to linkmodes using phy_caps
phylink_caps_to_linkmodes() is used to derive a list of linkmodes that
can be conceivably exposed using a given set of speeds and duplex
through phylink's MAC capabilities.

This list can be derived from the link_caps array in phy_caps, provided
we convert the MAC capabilities into a LINK_CAPA bitmask first.

Introduce an internal phylink helper phylink_caps_to_link_caps() to
convert from MAC capabilities into phy_caps, then  phy_caps_linkmodes()
to do the link_caps -> linkmodes conversion.

This avoids having to update phylink for every new linkmode.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250307173611.129125-13-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18 09:03:12 +01:00
Maxime Chevallier
3bea75002a net: phylink: Add a mapping between MAC_CAPS and LINK_CAPS
phylink allows MAC drivers to report the capabilities in terms of speed,
duplex and pause support. This is done through a dedicated set of enum
values in the form of the MAC_ capabilities. They are very close to what
the LINK_CAPA_xxx can express, with the difference that LINK_CAPA don't
have any information about Pause/Asym Pause support.

To prepare converting phylink to using the phy_caps, add the mapping
between MAC capabilities and phy_caps. While doing so, we move the
phylink_caps_params array up a bit to simplify future commits.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250307173611.129125-12-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18 09:03:12 +01:00
Maxime Chevallier
ce60fef7fe net: phy: drop phy_settings and the associated lookup helpers
The phy_settings array is no longer relevant as it has now been replaced
by the link_caps array and associated phy_caps helpers.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250307173611.129125-11-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18 09:03:11 +01:00
Maxime Chevallier
de7d3f87be net: phylink: Use phy_caps_lookup for fixed-link configuration
When phylink creates a fixed-link configuration, it finds a matching
linkmode to set as the advertised, lp_advertising and supported modes
based on the speed and duplex of the fixed link.

Use the newly introduced phy_caps_lookup to get these modes instead of
phy_lookup_settings(). This has the side effect that the matched
settings and configured linkmodes may now contain several linkmodes (the
intersection of supported linkmodes from the phylink settings and the
linkmodes that match speed/duplex) instead of the one from
phy_lookup_settings().

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250307173611.129125-10-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18 09:03:11 +01:00
Maxime Chevallier
c7ae89c6b4 net: phy: phy_device: Use link_capabilities lookup for PHY aneg config
When configuring PHY advertising with autoneg disabled, we lookd for an
exact linkmode to advertise and configure for the requested Speed and
Duplex, specially at or over 1G.

Using phy_caps_lookup allows us to build a list of the supported
linkmodes at that speed that we can advertise instead of the first mode
that matches.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250307173611.129125-9-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18 09:03:11 +01:00
Maxime Chevallier
fc81e257d1 net: phy: phy_caps: Allow looking-up link caps based on speed and duplex
As the link_caps array is efficient for <speed,duplex> lookups,
implement a function for speed/duplex lookups that matches a given
mask. This replicates to some extent the phy_lookup_settings()
behaviour, matching full link_capabilities instead of a single linkmode.

phy.c's phy_santize_settings() and phylink's
phylink_ethtool_ksettings_set() performs such lookup using the
phy_settings table, but are only interested in the actual speed/duplex
that were matched, rathet than the individual linkmode.

Similar to phy_lookup_settings(), the newly introduced phy_caps_lookup()
will run through the link_caps[] array by descending speed/duplex order.

If the link_capabilities for a given <speed/duplex> tuple intersects the
passed linkmodes, we consider that a match.

Similar to phy_lookup_settings(), we also allow passing an 'exact'
boolean, allowing non-exact match. Here, we MUST always match the
linkmodes mask, but we allow matching on lower speed settings.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250307173611.129125-8-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18 09:03:11 +01:00
Maxime Chevallier
dbcd85b05c net: phy: phy_caps: Implement link_capabilities lookup by linkmode
In several occasions, phylib needs to lookup a set of matching speed and
duplex against a given linkmode set. Instead of relying on the
phy_settings array and thus iterate over the whole linkmodes list, use
the link_capabilities array to lookup these matches, as we aren't
interested in the actual link setting that matches but rather the speed
and duplex for that setting.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250307173611.129125-7-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18 09:03:11 +01:00
Maxime Chevallier
87b22ce312 net: phy: phy_caps: Introduce phy_caps_valid
With the link_capabilities array, it's trivial to validate a given mask
againts a <speed, duplex> tuple. Create a helper for that purpose, and
use it to replace a phy_settings lookup in phy_check_valid();

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250307173611.129125-6-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18 09:03:11 +01:00
Maxime Chevallier
4823ed0609 net: phy: phy_caps: Move __set_linkmode_max_speed to phy_caps
Convert the __set_linkmode_max_speed to use the link_capabilities array.
This makes it easy to clamp the linkmodes to a given max speed.
Introduce a new helper phy_caps_linkmode_max_speed to replace the
previous one that used phy_settings.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250307173611.129125-5-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18 09:03:11 +01:00
Maxime Chevallier
8c8c4a8793 net: phy: phy_caps: Move phy_speeds to phy_caps
Use the newly introduced link_capabilities array to derive the list of
possible speeds when given a combination of linkmodes. As
link_capabilities is indexed by speed, we don't have to iterate the
whole phy_settings array.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250307173611.129125-4-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18 09:03:11 +01:00
Maxime Chevallier
d8c838a57c net: phy: Use an internal, searchable storage for the linkmodes
The canonical definition for all the link modes is in linux/ethtool.h,
which is complemented by the link_mode_params array stored in
net/ethtool/common.h . That array contains all the metadata about each
of these modes, including the Speed and Duplex information.

Phylib and phylink needs that information as well for internal
management of the link, which was done by duplicating that information
in locally-stored arrays and lookup functions. This makes it easy for
developpers adding new modes to forget modifying phylib and phylink
accordingly.

However, the link_mode_params array in net/ethtool/common.c is fairly
inefficient to search through, as it isn't sorted in any manner. Phylib
and phylink perform a lot of lookup operations, mostly to filter modes
by speed and/or duplex.

We therefore introduce the link_caps private array in phy_caps.c, that
indexes linkmodes in a more efficient manner. Each element associated a
tuple <speed, duplex> to a bitfield of all the linkmodes runs at these
speed/duplex.

We end-up with an array that's fairly short, easily addressable and that
it optimised for the typical use-cases of phylib/phylink.

That array is initialized at the same time as phylib. As the
link_mode_params array is part of the net stack, which phylink depends
on, it should always be accessible from phylib.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250307173611.129125-3-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18 09:03:11 +01:00
Maxime Chevallier
79f88a584e net: ethtool: Export the link_mode_params definitions
link_mode_params contains a lookup table of all 802.3 link modes that
are currently supported with structured data about each mode's speed,
duplex, number of lanes and mediums.

As a preparation for a port representation, export that table for the
rest of the net stack to use.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250307173611.129125-2-maxime.chevallier@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18 09:03:11 +01:00
James Bottomley
11092db5b5 efivarfs: fix NULL dereference on resume
LSMs often inspect the path.mnt of files in the security hooks, and this
causes a NULL deref in efivarfs_pm_notify() because the path is
constructed with a NULL path.mnt.

Fix by obtaining from vfs_kern_mount() instead, and being very careful
to ensure that deactivate_super() (potentially triggered by a racing
userspace umount) is not called directly from the notifier, because it
would deadlock when efivarfs_kill_sb() tried to unregister the notifier
chain.

[ Al notes:
	Umm...  That's probably safe, but not as a long-term solution -
	it's too intimately dependent upon fs/super.c internals. The
	reasons why you can't run into ->s_umount deadlock here are
	non-trivial... ]

Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Link: https://lore.kernel.org/r/e54e6a2f-1178-4980-b771-4d9bafc2aa47@tnxip.de
Link: https://lore.kernel.org/r/3e998bf87638a442cbc6864cdcd3d8d9e08ce3e3.camel@HansenPartnership.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2025-03-18 08:46:08 +01:00
Will Deacon
250f25367b KVM: arm64: Tear down vGIC on failed vCPU creation
If kvm_arch_vcpu_create() fails to share the vCPU page with the
hypervisor, we propagate the error back to the ioctl but leave the
vGIC vCPU data initialised. Note only does this leak the corresponding
memory when the vCPU is destroyed but it can also lead to use-after-free
if the redistributor device handling tries to walk into the vCPU.

Add the missing cleanup to kvm_arch_vcpu_create(), ensuring that the
vGIC vCPU structures are destroyed on error.

Cc: <stable@vger.kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Quentin Perret <qperret@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250314133409.9123-1-will@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2025-03-17 23:30:51 -07:00
Tudor Ambarus
eec373688d
mtd: spi-nor: drop unused <linux/of_platform.h>
There's nothing used in the SPI NOR core from <linux/of_platform.h>,
drop the header inclusion.

Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20250307-spi-nor-headers-cleanup-v1-3-c186a9511c1e@linaro.org
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
2025-03-18 07:59:43 +02:00
Tudor Ambarus
fafa240a17
mtd: spi-nor: explicitly include <linux/of.h>
The core driver is using of_property_read_bool() and relies on implicit
inclusion of <linux/of.h>, which comes from <linux/mtd/mtd.h>.

It is good practice to directly include all headers used, it avoids
implicit dependencies and spurious breakage if someone rearranges
headers and causes the implicit include to vanish.

Include the missing header.

Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20250307-spi-nor-headers-cleanup-v1-1-c186a9511c1e@linaro.org
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
2025-03-18 07:59:29 +02:00
Linus Torvalds
76b6905c11 15 hotfixes. 7 are cc:stable and the remainder address post-6.13 issues
or aren't considered necessary for -stable kernels.
 
 13 are for MM and the other two are for squashfs and procfs.
 
 All are singletons.  Please see the individual changelogs for details.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ9jkDgAKCRDdBJ7gKXxA
 jtgjAP0ZIVQ8wEL/txkrNyMT5JrWCK1XfjsfPNJ0afkcl4Oo/QEA8rnJHT/hX8aY
 Wr+aY2CoCsFEOsW4oDRUPrUYpkUBqA8=
 =AwLJ
 -----END PGP SIGNATURE-----

Merge tag 'mm-hotfixes-stable-2025-03-17-20-09' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc hotfixes from Andrew Morton:
 "15 hotfixes. 7 are cc:stable and the remainder address post-6.13
  issues or aren't considered necessary for -stable kernels.

  13 are for MM and the other two are for squashfs and procfs.

  All are singletons. Please see the individual changelogs for details"

* tag 'mm-hotfixes-stable-2025-03-17-20-09' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  mm/page_alloc: fix memory accept before watermarks gets initialized
  mm: decline to manipulate the refcount on a slab page
  memcg: drain obj stock on cpu hotplug teardown
  mm/huge_memory: drop beyond-EOF folios with the right number of refs
  selftests/mm: run_vmtests.sh: fix half_ufd_size_MB calculation
  mm: fix error handling in __filemap_get_folio() with FGP_NOWAIT
  mm: memcontrol: fix swap counter leak from offline cgroup
  mm/vma: do not register private-anon mappings with khugepaged during mmap
  squashfs: fix invalid pointer dereference in squashfs_cache_delete
  mm/migrate: fix shmem xarray update during migration
  mm/hugetlb: fix surplus pages in dissolve_free_huge_page()
  mm/damon/core: initialize damos->walk_completed in damon_new_scheme()
  mm/damon: respect core layer filters' allowance decision on ops layer
  filemap: move prefaulting out of hot write path
  proc: fix UAF in proc_get_inode()
2025-03-17 22:27:27 -07:00
Eric W. Biederman
9130945f81 MAINTAINERS: Remove myself
Unfortunately I no longer have time to meaningfully take part in the
linux kernel development.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2025-03-17 22:20:48 -07:00
Ian Rogers
ca2182097e perf test dso-data: Correctly free test file in read test
The DSO data read test opens a file but as dsos__exit is used the test
file isn't closed. This causes the subsequent subtests in don't fork
(-F) mode to fail as one more than expected file descriptor is open.

Signed-off-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250318043151.137973-4-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2025-03-17 22:07:18 -07:00