perf_pmus__default_pmu_name() last use was removed by 2023's
commit e3edd6cf63 ("perf pmu-events: Reduce processed events by passing
PMU")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250305023120.155420-6-linux@treblig.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
perf_data__update_dir() was added in 2019's
commit e8be135751 ("perf data: Add perf_data__update_dir() function")
but has never been used.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250305023120.155420-5-linux@treblig.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The last use of pstack__pop() was removed in 2015 by
commit 6422184b08 ("perf hists browser: Simplify zooming code using
pstack_peek()")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250305023120.155420-4-linux@treblig.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
perf_color_default_config() was added in 2009 by
commit 8fc0321f1a ("perf_counter tools: Add color terminal output
support")
but has remained unused.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250305023120.155420-3-linux@treblig.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Refactor cursor handling to make the code maintainable again. Over the
last 12 years the svga device improved support for virtualized cursors
and at the same time the drm interfaces evolved quite a bit from
pre-atomic to current atomic ones. vmwgfx only added new code over
the years, instead of adjusting/refactoring the paths.
Export the cursor plane handling to its own file. Remove special
handling of the legacy cursor support to make it fit within the global
cursor plane mechanism.
Finally redo dirty tracking because memcmp never worked correctly
resulting in the cursor not being properly updated in the guest.
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Reviewed-by: Maaz Mombasawala <maaz.mombasawala@broadcom.com>
Reviewed-by: Martin Krastev <martin.krastev@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250307125836.3877138-2-zack.rusin@broadcom.com
Need to use the correct IP block type. VCE vs VCN.
Fixes mclk issues on Hawaii.
Suggested by selendym.
Fixes: 82ae6619a4 ("drm/amdgpu: update the handle ptr in wait_for_idle")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3997
Reviewed-by: Boyuan Zhang <Boyuan.Zhang@amd.com>
Cc: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 02438acd25)
Cc: stable@vger.kernel.org
[Why]
A slab-use-after-free is reported when HDCP is destroyed but the
property_validate_dwork queue is still running.
[How]
Cancel the delayed work when destroying workqueue.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4006
Fixes: da3fd7ac0b ("drm/amd/display: Update CP property based on HW query")
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 725a04ba5a)
Cc: stable@vger.kernel.org
[WHY & HOW]
A warning message "WARNING: CPU: 4 PID: 459 at ... /dc_resource.c:3397
calculate_phy_pix_clks+0xef/0x100 [amdgpu]" occurs because the
display_color_depth == COLOR_DEPTH_141414 is not handled. This is
observed in Radeon RX 6600 XT.
It is fixed by assigning pix_clk * (14 * 3) / 24 - same as the rests.
Also fixes the indentation in get_norm_pix_clk.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 274a87eb38)
Cc: stable@vger.kernel.org
[Why]
GPU reset will attempt to restore cached state, but brightness doesn't
get restored. It will come back at 100% brightness, but userspace thinks
it's the previous value.
[How]
When running resume sequence if GPU is in reset restore brightness
to previous value.
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5e19e2b57b)
Cc: stable@vger.kernel.org
Add a definition for the Qualcomm Kryo 300-series Gold cores.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Trilok Soni <quic_tsoni@quicinc.com>
Link: https://lore.kernel.org/r/20241219131107.v3.1.I18e0288742871393228249a768e5d56ea65d93dc@changeid
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[Why]
To avoid flickering during boot default brightness level set by BIOS
should be maintained for as much of the boot as feasible.
commit 2fe87f54ab ("drm/amd/display: Set default brightness according
to ACPI") attempted to set the right levels for AC vs DC, but brightness
still got reset to maximum level in initialization code for
setup_backlight_device().
[How]
Remove the hardcoded initialization in setup_backlight_device() and
instead program brightness value to match BIOS (AC or DC). This avoids a
brightness flicker from kernel changing the value. Userspace may however
still change it during boot.
Fixes: 2fe87f54ab ("drm/amd/display: Set default brightness according to ACPI")
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0747acf331)
Cc: stable@vger.kernel.org
The value of POR_EL0_INIT is not architectural, it is a software
decision. Since we have a dedicated header for POR_ELx, we might as
well define POR_EL0_INIT there.
While at it also define POR_EL0_INIT using POR_ELx_PERM_PREP(),
making it clearer that we are setting permissions for POIndex/pkey
0.
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Link: https://lore.kernel.org/r/20250219164029.2309119-4-kevin.brodsky@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
It is customary to list R, W, X permissions in that order. In fact
this is already the case for PIE constants (PIE_RWX). Rename POE_RXW
accordingly, as well as POE_XW (currently unused).
While at it also swap the W/X lines in
compute_s1_overlay_permissions() to follow the R, W, X order.
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Link: https://lore.kernel.org/r/20250219164029.2309119-3-kevin.brodsky@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
We currently have one helper to set a PIRx_ELx's permission field to
a given value, PIRx_ELx_PERM(), and another helper to extract a
permission field from POR_ELx, POR_ELx_IDX(). The naming is pretty
confusing - it isn't clear at all that "_PERM" corresponds to a
setter and "_IDX" to a getter.
This patch aims at improving the situation by using the same
suffixes as FIELD_PREP()/FIELD_GET(), which we have already adopted
for SYS_FIELD_{PREP,GET}():
* PIRx_ELx_PERM_PREP(), POR_ELx_PERM_PREP() create a register value
where the permission field for a given index is set to a given value.
* POR_ELx_PERM_GET() extracts the permission field from a given
register value for a given index.
These helpers are not implemented using FIELD_PREP()/FIELD_GET()
because the mask may not be constant, and they need to be usable in
assembly. They are all defined in asm/sysreg.h, as one would expect
for basic sysreg-related helpers.
Finally the new POR_ELx_PERM_* macros are used for existing
calculations in signal.c and mmu.c.
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Link: https://lore.kernel.org/r/20250219164029.2309119-2-kevin.brodsky@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
[Why]
It seems HPD interrupts are enabled by default for all connectors, even
if the hpd source isn't valid. An eDP for example, does not have a valid
hpd source (but does have a valid hpdrx source; see construct_phy()).
Thus, eDPs should have their hpd interrupt disabled.
In the past, this wasn't really an issue. Although the driver gets
interrupted, then acks by writing to hw registers, there weren't any
subscribed handlers that did anything meaningful (see
register_hpd_handlers()).
But things changed with the introduction of IPS. s2idle requires that
the driver allows IPS for DMUB fw to put hw to sleep. Since register
access requires hw to be awake, the driver will block IPS entry to do
so. And no IPS means no hw sleep during s2idle.
This was the observation on DCN35 systems with an eDP. During suspend,
the eDP toggled its hpd pin as part of the panel power down sequence.
The driver was then interrupted, and acked by writing to registers,
blocking IPS entry.
[How]
Since DC marks eDP connections as having invalid hpd sources (see
construct_phy()), DM should disable them at the hw level. Do so in
amdgpu_dm_hpd_init() by disabling all hpd ints first, then selectively
enabling ones for connectors that have valid hpd sources.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 7b1ba19eb1)
Cc: stable@vger.kernel.org
When userspace invokes S4 the flow is:
1) amdgpu_pmops_prepare()
2) amdgpu_pmops_freeze()
3) Create hibernation image
4) amdgpu_pmops_thaw()
5) Write out image to disk
6) Turn off system
Then on resume amdgpu_pmops_restore() is called.
This flow has a problem that because amdgpu_pmops_thaw() is called
it will call amdgpu_device_resume() which will resume all of the GPU.
This includes turning the display hardware back on and discovering
connectors again.
This is an unexpected experience for the display to turn back on.
Adjust the flow so that during the S4 sequence display hardware is
not turned back on.
Reported-by: Xaver Hugl <xaver.hugl@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2038
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Link: https://lore.kernel.org/r/20250306185124.44780-1-mario.limonciello@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 68bfdc8dc0)
Starting from 6.11, AMDGPU driver, while being loaded with amdgpu.dc=1,
due to lack of .is_two_pixels_per_container function in dce60_tg_funcs,
causes a NULL pointer dereference on PCs with old GPUs, such as R9 280X.
So this fix adds missing .is_two_pixels_per_container to dce60_tg_funcs.
Reported-by: Rosen Penev <rosenp@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3942
Fixes: e6a901a008 ("drm/amd/display: use even ODM slice width for two pixels per container")
Signed-off-by: Aliaksei Urbanski <aliaksei.urbanski@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit bd4b125eb9)
Cc: stable@vger.kernel.org
We advertise DCC as supported for NV12/P010 formats on GFX12,
but it would fail on this check on atomic commit.
Signed-off-by: David Rosca <david.rosca@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ba795235a2)
Cc: stable@vger.kernel.org # 6.12.x
Haven't authored any commits to that driver in 10 years, and haven't
had supported hardware for nearly as long.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20250307143740.960328-1-hadess@hadess.net
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
ksmbd_work could be freed when after connection release.
Increment r_count of ksmbd_conn to indicate that requests
are not finished yet and to not release the connection.
Cc: stable@vger.kernel.org
Reported-by: Norbert Szetei <norbert@doyensec.com>
Tested-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
->interim_entry of ksmbd_work could be deleted after oplock is freed.
We don't need to manage it with linked list. The interim request could be
immediately sent whenever a oplock break wait is needed.
Cc: stable@vger.kernel.org
Reported-by: Norbert Szetei <norbert@doyensec.com>
Tested-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Raptor Lake-S SoCs notify correctable memory errors via CMCI (Corrected
Machine Check Interrupt). Switch Raptor Lake-S EDAC support from polling
to interrupt mode by registering the callback to the MCE decode notifier
chain.
Note that as Raptor Lake-S SoCs may not recover from uncorrectable memory
errors, the system will hang as soon as this type of error occurs, and the
registered callback on the MCE decode chain will not be executed. This is
the expected behavior.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Gary Wang <gary.c.wang@intel.com>
Link: https://lore.kernel.org/r/20250310011411.31685-12-qiuxu.zhuo@intel.com
The Intel Raptor Lake-S SoC contains two memory controllers with DDR5
memory type and out-of-band ECC capability. The resource definitions of
the memory controller are different from previous generations. One notable
difference is that the PCI ERRSTS register is deprecated and is not used
to indicate the presence of errors or to clear the MMIO-mapped ECC error
log regsiters.
Extend the ie31200_edac driver to support multiple memory controllers,
add a resource configuration table and use an MSR register to clear the
ECC error log registers to provide EDAC support for Raptor Lake-S SoCs.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Gary Wang <gary.c.wang@intel.com>
Link: https://lore.kernel.org/r/20250310011411.31685-11-qiuxu.zhuo@intel.com
Split ie31200_probe1() into two helper functions to easily extend support
for multiple memory controllers.
No functional changes intended.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Gary Wang <gary.c.wang@intel.com>
Link: https://lore.kernel.org/r/20250310011411.31685-10-qiuxu.zhuo@intel.com
Fold the two channel loops to simplify the code and improve readability.
Also, delete the comments related to the DRB register, as this register
is not used here.
No functional changes intended.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Gary Wang <gary.c.wang@intel.com>
Link: https://lore.kernel.org/r/20250310011411.31685-9-qiuxu.zhuo@intel.com
The current implementation of the goodix_berlin driver lacks support for
revisions A and B of the Berlin IC. This change adds support for the
gt9897 IC, which is a Berlin-A revision part.
The differences between revision D and A are rather minor, a handful of
address changes and a slightly larger read buffer. They were taken from
the driver published by Goodix, which does a few more things that don't
appear to be necessary for the touchscreen to work properly.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Jens Reidel <adrian@mainlining.org>
Link: https://lore.kernel.org/r/20250309062315.35720-3-adrian@mainlining.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Document the Goodix GT9897 which is a Berlin-A series touchscreen
controller IC by Goodix.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jens Reidel <adrian@mainlining.org>
Link: https://lore.kernel.org/r/20250309062315.35720-2-adrian@mainlining.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The current dimm_data structure contains encoded DIMM information,
which needs to be decoded for a given SoC when it is used. Make it
contain decoded information when it's initialized so that the places
where it is used do not need to decode it again, thereby simplifying
the code.
No functional changes intended.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Gary Wang <gary.c.wang@intel.com>
Link: https://lore.kernel.org/r/20250310011411.31685-8-qiuxu.zhuo@intel.com
The resources such as MMIO, register offset, register mask, memory DIMM
information, ECC error log location, etc., of the memory controller, and
the number of memory controllers can be device-ID-specific. It requires
adding numerous 'if (device_id == new_id)' special handling cases to the
code to support a new SoC.
Make these kinds of resources configurable and separate them from the code
to facilitate the addition of new SoC support.
No functional changes intended.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Gary Wang <gary.c.wang@intel.com>
Link: https://lore.kernel.org/r/20250310011411.31685-7-qiuxu.zhuo@intel.com
Use PCI_VDEVICE() to simplify the pci_device_id table.
No functional changes intended.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Gary Wang <gary.c.wang@intel.com>
Link: https://lore.kernel.org/r/20250310011411.31685-6-qiuxu.zhuo@intel.com
The 3rd parameter of *populate_dimm_info() pertains to the DIMM index
within a channel, not the channel index. Fix the parameter name to dimm
to reflect its actual purpose.
No functional changes intended.
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Gary Wang <gary.c.wang@intel.com>
Link: https://lore.kernel.org/r/20250310011411.31685-5-qiuxu.zhuo@intel.com
The error path order of ie31200_init() is incorrect, fix it.
Fixes: 709ed1bcef ("EDAC/ie31200: Fallback if host bridge device is already initialized")
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Gary Wang <gary.c.wang@intel.com>
Link: https://lore.kernel.org/r/20250310011411.31685-4-qiuxu.zhuo@intel.com
The DIMM size mask for {Sky, Kaby, Coffee} Lake is not bits{7:0},
but bits{5:0}. Fix it.
Fixes: 953dee9bbd ("EDAC, ie31200_edac: Add Skylake support")
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Gary Wang <gary.c.wang@intel.com>
Link: https://lore.kernel.org/r/20250310011411.31685-3-qiuxu.zhuo@intel.com
The EDAC_MC_LAYER_CHIP_SELECT layer pertains to the rank, not the DIMM.
Fix its size to reflect the number of ranks instead of the number of DIMMs.
Also delete the unused macros IE31200_{DIMMS,RANKS}.
Fixes: 7ee40b897d ("ie31200_edac: Introduce the driver")
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Tested-by: Gary Wang <gary.c.wang@intel.com>
Link: https://lore.kernel.org/r/20250310011411.31685-2-qiuxu.zhuo@intel.com
Need to use the correct IP block type. VCE vs VCN.
Fixes mclk issues on Hawaii.
Suggested by selendym.
Fixes: 82ae6619a4 ("drm/amdgpu: update the handle ptr in wait_for_idle")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3997
Reviewed-by: Boyuan Zhang <Boyuan.Zhang@amd.com>
Cc: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We are trying to get rid of all multiplications from allocation
functions to prevent integer overflows. Here the multiplication is
probably safe, but using kcalloc() is more appropriate and improves
readability. This patch has no effect on runtime behavior.
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We are trying to get rid of all multiplications from allocation
functions to prevent integer overflows. Here the multiplication is
probably safe, but using kcalloc() is more appropriate and improves
readability. This patch has no effect on runtime behavior.
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We are trying to get rid of all multiplications from allocation
functions to prevent integer overflows. Here the multiplication is
probably safe, but using kcalloc() is more appropriate and improves
readability. This patch has no effect on runtime behavior.
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We are trying to get rid of all multiplications from allocation
functions to prevent integer overflows. Here the multiplication is
probably safe, but using kcalloc() is more appropriate and improves
readability. This patch has no effect on runtime behavior.
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following fixes:
- Fix some Replay/PSR issue
- Fix backlight brightness
- Fix suspend issue
- Fix visual confirm color
- Add scoped mutexes for amdgpu_dm_dhcp
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
1. apply oem panel timing (not only on OLED)
2. remove MIN_DPP_DISP_CLK request in driver.
This fix will apply for dcn31x but not
sync with DML's output.
Reviewed-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
enable_assr() has a res variable that only is changed in one block with
no cleanup necessary.
[How]
Remove variable and return early from failure cases.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Guards automatically release mutex when it goes out of scope making
code easier to follow.
[How]
Replace all use of mutex_lock()/mutex_unlock() with guard(mutex).
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The check for args->extensions is repeated twice in xe_vm_create_ioctl().
This commit removes the redundant check to streamline the code.
Fixes: 7224788f67 ("drm/xe: Kill XE_VM_PROPERTY_BIND_OP_ERROR_CAPTURE_ADDRESS extension")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Xin Wang <x.wang@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250303004942.951699-1-x.wang@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Why]
A slab-use-after-free is reported when HDCP is destroyed but the
property_validate_dwork queue is still running.
[How]
Cancel the delayed work when destroying workqueue.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4006
Fixes: da3fd7ac0b ("drm/amd/display: Update CP property based on HW query")
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For some VR headsets with large blanks, it's possible
to overflow the OTG_VSTARTUP_PARAM:VSTARTUP_START
register. This can lead to incorrect DML calculations
and underflow downstream.
[How]
Min the calcualted max_vstartup_lines with the max
value of the register.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Ryan Seto <ryanseto@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
stream->adjust will be overwritten by update->crtc_timing_adjust.
We should set update->crtc_timing_adjust->timing_adjust_pending
and then overwrite stream->adjust.
Reset update->crtc_timing_adjust->timing_adjust_pending after
the assignment.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Zhongwei Zhang <Zhongwei.Zhang@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
In some cases the remain de-tile buffer segments will be greater
than zero if we don't add the non-top pipe to calculate, at
this time the override de-tile buffer size will be valid and used.
But it makes the de-tile buffer segments used finally for all of pipes
exceed the maximum.
[HOW]
Add the non-top pipe to calculate the remain de-tile buffer segments.
Don't set override size to use the average according to pipe count
if the value exceed the maximum.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Zhikai Zhai <zhikai.zhai@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>