- Expose per-engine activity via perf pmu (Riana, Lucas, Umesh)
- Add support for EU stall sampling (Harish, Ashutosh)
- Allow userspace to provide low latency hint for submission (Tejas)
- GPU SVM and Xe SVM implementation (Matthew Brost)
Cross-subsystem Changes:
- devres handling for component drivers (Lucas)
- Backmege drm-next to allow cross dependent change with i915
- GPU SVM and Xe SVM implementation (Matthew Brost)
Core Changes:
Driver Changes:
- Fixes to userptr and missing validations (Matthew Auld, Thomas
Hellström, Matthew Brost)
- devcoredump typos and error handling improvement (Shuicheng)
- Allow oa_exponent value of 0 (Umesh)
- Finish moving device probe to devm (Lucas)
- Fix race between submission restart and scheduled being freed (Tejas)
- Fix counter overflows in gt_stats (Francois)
- Refactor and add missing workarounds and tunings for pre-Xe2 platforms
(Aradhya, Tvrtko)
- Fix PXP locks interaction with exec queues being killed (Daniele)
- Eliminate TIMESTAMP_OVERRIDE from xe (Matt Roper)
- Change xe_gen_wa_oob to allow building on MacOS (Daniel Gomez)
- New workarounds for Panther Lake (Tejas)
- Fix VF resume errors (Satyanarayana)
- Fix workaround infra skipping some workarounds dependent on engine
initialization (Tvrtko)
- Improve per-IP descriptors (Gustavo)
- Add more error injections to probe sequence (Francois)
-----BEGIN PGP SIGNATURE-----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=98mS
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-next-2025-03-07' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
- Expose per-engine activity via perf pmu (Riana, Lucas, Umesh)
- Add support for EU stall sampling (Harish, Ashutosh)
- Allow userspace to provide low latency hint for submission (Tejas)
- GPU SVM and Xe SVM implementation (Matthew Brost)
Cross-subsystem Changes:
- devres handling for component drivers (Lucas)
- Backmege drm-next to allow cross dependent change with i915
- GPU SVM and Xe SVM implementation (Matthew Brost)
Core Changes:
Driver Changes:
- Fixes to userptr and missing validations (Matthew Auld, Thomas
Hellström, Matthew Brost)
- devcoredump typos and error handling improvement (Shuicheng)
- Allow oa_exponent value of 0 (Umesh)
- Finish moving device probe to devm (Lucas)
- Fix race between submission restart and scheduled being freed (Tejas)
- Fix counter overflows in gt_stats (Francois)
- Refactor and add missing workarounds and tunings for pre-Xe2 platforms
(Aradhya, Tvrtko)
- Fix PXP locks interaction with exec queues being killed (Daniele)
- Eliminate TIMESTAMP_OVERRIDE from xe (Matt Roper)
- Change xe_gen_wa_oob to allow building on MacOS (Daniel Gomez)
- New workarounds for Panther Lake (Tejas)
- Fix VF resume errors (Satyanarayana)
- Fix workaround infra skipping some workarounds dependent on engine
initialization (Tvrtko)
- Improve per-IP descriptors (Gustavo)
- Add more error injections to probe sequence (Francois)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ilc5jvtyaoyi6woyhght5a6sw5jcluiojjueorcyxbynrcpcjp@mw2mi6rd6a7l
The original support for incrementally consumed buffers didn't allow it
to be used with bundles, with the assumption being that incremental
buffers are generally larger, and hence there's less of a nedd to
support it.
But that assumption may not be correct - it's perfectly viable to use
smaller buffers with incremental consumption, and there may be valid
reasons for an application or framework to do so.
As there's really no need to explicitly disable bundles with
incrementally consumed buffers, allow it. This actually makes the peek
side cheaper and simpler, with the completion side basically the same,
just needing to iterate for the consumed length.
Reported-by: Norman Maurer <norman_maurer@apple.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit 2a51c327d4.
The kernel registered bvecs do use the iov_iter_advance() API, so we
can't rely on this simplification anymore.
Fixes: 27cb27b6d5 ("io_uring: add support for kernel registered bvecs")
Reported-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Link: https://lore.kernel.org/r/20250310184825.569371-1-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add UBLK_TEST_QUIET, so we can print test result(PASS/SKIP/FAIL) only.
Also always run from test script's current directory, then the same test
script can be started from other work directory.
This way helps a lot to reuse this test source code and scripts for
other projects(liburing, blktests, ...)
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250303124324.3563605-12-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add stress_test_01 for running IO vs. killing ublk server, so io_uring exit &
cancel code path can be covered, same with ublk's cancel code path.
Especially IO buffer lifetime is one big thing for ublk zero copy, the added
test can verify if this area works as expected.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250303124324.3563605-11-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add stress_test_01 for running IO vs. removing device for verifying that
ublk device removal can work as expected when heavy IO workloads are in
progress.
null, loop and loop/zc are covered in this tests.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250303124324.3563605-10-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Load ublk_drv module in _prep_test(), and unload it in _cleanup_test(),
so that test can always be done in consistent state.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250303124324.3563605-9-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move zero copy feature check into _add_ublk_dev() since we will have
more tests which requires to cover zero copy.
Then one check function of _check_add_dev() has to be added for dealing
with cleanup since '_add_ublk_dev()' is run in sub-shell, and we can't
exit from it to terminal shell.
Meantime always return error code from _add_ublk_dev().
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250303124324.3563605-8-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
More devices can be created in single tests, so simply remove all
ublk devices in _cleanup_test(), meantime remove the ${dev_id} argument
of _cleanup_test().
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250303124324.3563605-7-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The argument of '-a' doesn't follow any value, so fix it by putting it
with '-z' together.
Fixes: bedc9cbc5f ("selftests: ublk: add ublk zero copy test")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20250303124324.3563605-5-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Update the Documentation to be more precise.
v2: Update for clarity
v3: Further details in Todo
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Anusha Srivatsa <asrivats@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/640856/?series=144073&rev=5
Fedora introduced a "MiniDebuginfo" feature, in which an LZMA-compressed
ELF file is placed inside a section named ".gnu_debugdata". This file
contains nothing but a symbol table, which can be used to supplement the
.dynsym section which only contains required symbols for runtime.
It is supported by GDB for stack traces, but it should be useful for
tracing as well. Implement support for loading symbols from
.gnu_debugdata.
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20250307232206.2102440-4-stephen.s.brennan@oracle.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Internally lzma_decompress_to_file() creates a FILE from the filename.
Add an API that takes an existing FILE directly. This allows
decompressing already-open files and even buffers opened by fmemopen().
It is necessary for supporting .gnu_debugdata in the next patch.
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20250307232206.2102440-3-stephen.s.brennan@oracle.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
This allows us to use them without needing to ifdef the calling code.
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20250307232206.2102440-2-stephen.s.brennan@oracle.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
When preparing the mem events for the argv copies are intentionally
made. These copies are leaked and cause runs of perf using address
sanitizer to fail. Rather than leak the memory allocate a chunk of
memory for the mem event names upfront and build the strings in this -
the storage is sized larger than the previous buffer size. The caller
is then responsible for clearing up this memory. As part of this
change, remove the mem_loads_name and mem_stores_name global buffers
then change the perf_pmu__mem_events_name to write to an out argument
buffer.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Falcon <thomas.falcon@intel.com>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Link: https://lore.kernel.org/r/20250308012853.1384762-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The SiFive Performance P650 core (including the vector-enabled P670 and
area-optimized P450/P470 variants) updates the P550 microarchitecture.
It brings in the debug, trace, and counter events from newer Bullet
cores, and adds new events for iTLB and dTLB multi-hits.
All other PMU events are unchanged from the P550 core.
Signed-off-by: Eric Lin <eric.lin@sifive.com>
Co-developed-by: Samuel Holland <samuel.holland@sifive.com>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Ian Rogers <irogers@google.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20250213220341.3215660-8-samuel.holland@sifive.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The SiFive Performance P550 core features an out-of-order
microarchitecture which exposes the same PMU events as Bullet,
plus events for UTLB hits and PTE cache misses/hits.
Add support for specifying these events using symbolic names.
Signed-off-by: Eric Lin <eric.lin@sifive.com>
Co-developed-by: Samuel Holland <samuel.holland@sifive.com>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Ian Rogers <irogers@google.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20250213220341.3215660-7-samuel.holland@sifive.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
SiFive Bullet microarchitecture cores with mimpid values starting with
0x0d or greater add new PMU events to count TLB miss stall cycles.
All other PMU events are unchanged from earlier Bullet cores.
Signed-off-by: Eric Lin <eric.lin@sifive.com>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Ian Rogers <irogers@google.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20250213220341.3215660-6-samuel.holland@sifive.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
SiFive Bullet microarchitecture cores with mimpid values starting with
0x07 or greater add new PMU events to support debug, trace, and counter
sampling and filtering (Sscofpmf).
All other PMU events are unchanged from earlier Bullet cores.
Signed-off-by: Eric Lin <eric.lin@sifive.com>
Co-developed-by: Samuel Holland <samuel.holland@sifive.com>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Ian Rogers <irogers@google.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20250213220341.3215660-5-samuel.holland@sifive.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Regenerate the event lists from the original hardware description. This
makes them consistent with the event lists for newer versions of the
hardware, allowing most files to be reused across hardware versions.
Signed-off-by: Eric Lin <eric.lin@sifive.com>
Co-developed-by: Samuel Holland <samuel.holland@sifive.com>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Ian Rogers <irogers@google.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20250213220341.3215660-4-samuel.holland@sifive.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The EventCode field (as stored in the mhpmeventN CSRs) is actually 56
bits wide, but there is no need to keep leading zeroes in the JSON
files. Remove them to simplify review of the following change, which
regenerates the files in a way that does not include leading zeroes.
This change was performed automatically with `sed -i "s/0x0*/0x/"`.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Ian Rogers <irogers@google.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20250213220341.3215660-3-samuel.holland@sifive.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
This set of PMU event descriptions applies not only to the SiFive U74
core configuration, but also to other SiFive cores that implement the
Bullet microarchitecture (such as U64, P270, and X280). Rename the
directory to be more generic.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Ian Rogers <irogers@google.com>
Tested-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20250213220341.3215660-2-samuel.holland@sifive.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
As AE4DMA offers multi-channel functionality compared to PTDMA’s single
queue, utilize multi-queue, which supports higher speeds than PTDMA, to
achieve higher performance using the AE4DMA workqueue based mechanism.
Fixes: 69a47b16a5 ("dmaengine: ptdma: Extend ptdma to support multi-channel and version")
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Link: https://lore.kernel.org/r/20250203162511.911946-4-Basavaraj.Natikar@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Instead of using the defined maximum hardware queue, which can lead to
incorrect values if the counts mismatch, use the exact supported MSI
count and its corresponding IRQ number.
Fixes: 90a30e268d ("dmaengine: ae4dma: Add AMD ae4dma controller driver")
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Link: https://lore.kernel.org/r/20250203162511.911946-3-Basavaraj.Natikar@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Two previously used PCI IDs are deprecated and should not be used for
AE4DMA. Hence, remove as they are unsupported for AE4DMA.
Fixes: 90a30e268d ("dmaengine: ae4dma: Add AMD ae4dma controller driver")
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Link: https://lore.kernel.org/r/20250203162511.911946-2-Basavaraj.Natikar@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The device_prep_dma_imm_data() method isn't implemented or invoked by
any code since commit 80ade22c06 ("misc: mic: remove the MIC drivers").
Remove it, shrinking struct dma_device by a few bytes.
Signed-off-by: Nathan Lynch <nathan.lynch@amd.com>
Link: https://lore.kernel.org/r/20250210-dmaengine-drop-imm-data-v1-1-e017766da2fa@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The .of_edma_xlate() function always sets the hw_triggered flag to
true. This causes sw triggered channels consumed via the device-tree
to not function properly, as the driver incorrectly assumes they are
hw triggered. Modify the xlate() function to correctly set the
hw_triggered flag to false for channels reserved for memcpy
operation (ie, sw triggered).
Signed-off-by: Matthew Majewski <mattwmajewski@gmail.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20250216214741.207538-1-mattwmajewski@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The SoC DMA resources for UDMA, BCDMA and PKTDMA can be described via a
combination of up to two resource ranges. The first resource range handles
the default partitioning wherein all resources belonging to that range are
allocated to a single entity and form a continuous range. For use-cases
where the resources are shared across multiple entities and require to be
described via discontinuous ranges, a second resource range is required.
Currently, udma_setup_resources() supports handling resources that belong
to the second range. Extend bcdma_setup_resources() and
pktdma_setup_resources() to support the same.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20250205121805.316792-1-s-vadapalli@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
There is kernel dump when do module test:
sysfs: cannot create duplicate filename
/devices/platform/soc@0/44000000.bus/44000000.dma-controller/dma/dma0chan0
__dma_async_device_channel_register+0x128/0x19c
dma_async_device_register+0x150/0x454
fsl_edma_probe+0x6cc/0x8a0
platform_probe+0x68/0xc8
fsl_edma_cleanup_vchan will unlink vchan.chan.device_node, while
dma_async_device_unregister needs the link to do
__dma_async_device_channel_unregister. So need move fsl_edma_cleanup_vchan
after dma_async_device_unregister to make sure channel could be freed.
So clean up chan after dma_async_device_unregister to address this.
Fixes: 6f93b93b2a ("dmaengine: fsl-edma: kill the tasklets upon exit")
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20250228071720.3780479-1-peng.fan@oss.nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
A RISC-V platform can have both DMA coherent/noncoherent devices.
Since the RISC-V architecture is marked coherent, devices should
be marked as noncoherent when coherent devices exist.
Add dma-noncoherent property for snps,dw-axi-dmac device. It will
be used on SG2044, and it has other coherent devices.
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250303065649.937233-1-inochiama@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Change the "wait for operation finish" logic to take interrupts into
account.
When using dmatest with idxd DMA engine, it's possible that during
longer tests, the interrupt notifying the finish of an operation
happens during wait_event_freezable_timeout(), which causes dmatest to
cleanup all the resources, some of which might still be in use.
This fix ensures that the wait logic correctly handles interrupts,
preventing premature cleanup of resources.
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202502171134.8c403348-lkp@intel.com
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20250305230007.590178-1-vinicius.gomes@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
With a functional and tested backend for virtio-block live migration,
add the virtio-block device ID to the pci_device_id table.
Currently, the driver supports legacy IO functionality only for
virtio-net, and it is accounted for in specific parts of the code.
To enforce this limitation, an explicit check for virtio-net, has been
added in virtiovf_support_legacy_io(). Once a backend implements legacy
IO functionality for virtio-block, the necessary support will be added
to the driver, and this additional check should be removed.
The module description was updated accordingly.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20250302162723.82578-1-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Matthieu Baerts says:
====================
mptcp: pm: code reorganisation
Before this series, the PM code was dispersed in different places:
- pm.c had common code for all PMs.
- pm_netlink.c was initially only about the in-kernel PM, but ended up
also getting exported common helpers, callbacks used by the different
PMs, NL events for PM userspace daemon, etc. quite confusing.
- pm_userspace.c had userspace PM only code, but it was using "specific"
in-kernel PM helpers according to their names.
To clarify the code, a reorganisation is suggested here, only by moving
code around, and small helper renaming to avoid confusions:
- pm_netlink.c now only contains common PM generic Netlink code:
- PM events: this code was already there
- shared helpers around Netlink code that were already there as well
- shared Netlink commands code from pm.c
- pm_kernel.c now contains only code that is specific to the in-kernel
PM. Now all functions are either called from:
- pm.c: events coming from the core, when this PM is being used
- pm_netlink.c: for shared Netlink commands
- mptcp_pm_gen.c: for Netlink commands specific to the in-kernel PM
- sockopt.c: for the exported counters per netns
- pm.c got many code from pm_netlink.c:
- helpers used from both PMs and not linked to Netlink
- callbacks used by different PMs, e.g. ADD_ADDR management
- some helpers have been renamed to remove the '_nl' prefix, and some
have been marked as 'static'.
- protocol.h has been updated accordingly:
- some helpers no longer need to be exported
- new ones needed to be exported: they have been prefixed if needed.
The code around the PM is now less confusing, which should help for the
maintenance in the long term, and the introduction of a PM Ops.
This will certainly impact future backports, but because other cleanups
have already done recently, and more are coming to ease the addition of
a new path-manager controlled with BPF (struct_ops), doing that now
seems to be a good time. Also, many issues around the PM have been fixed
a few months ago while increasing the code coverage in the selftests, so
such big reorganisation can be done with more confidence now.
Note that checkpatch, when used with --max-line-length=80, will complain
about lines being over the 80 limits, but these warnings were already
there before moving the code around.
Also, patch 1 is not directly related to the code reorganisation, but it
was a remaining cleanup that we didn't upstream before, because it was
conflicting with another patch that has been sent for inclusion to the
net tree.
====================
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-0-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before this patch, the PM code was dispersed in different places:
- pm.c had common code for all PMs, but also Netlink specific code that
will not be needed with the future BPF path-managers.
- pm_netlink.c had common Netlink code.
To clarify the code, a reorganisation is suggested here, only by moving
code around, and small helper renaming to avoid confusions:
- pm_netlink.c now only contains common PM Netlink code:
- PM events: this code was already there
- shared helpers around Netlink code that were already there as well
- shared Netlink commands code from pm.c
- pm.c now no longer contain Netlink specific code.
- protocol.h has been updated accordingly:
- mptcp_nl_fill_addr() no longer need to be exported.
The code around the PM is now less confusing, which should help for the
maintenance in the long term.
This will certainly impact future backports, but because other cleanups
have already done recently, and more are coming to ease the addition of
a new path-manager controlled with BPF (struct_ops), doing that now
seems to be a good time. Also, many issues around the PM have been fixed
a few months ago while increasing the code coverage in the selftests, so
such big reorganisation can be done with more confidence now.
No behavioural changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-15-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before this patch, the PM code was dispersed in different places:
- pm.c had common code for all PMs
- pm_netlink.c was supposed to be about the in-kernel PM, but also had
exported common Netlink helpers, NL events for PM userspace daemons,
etc. quite confusing.
To clarify the code, a reorganisation is suggested here, only by moving
code around to avoid confusions:
- pm_netlink.c now only contains common PM Netlink code:
- PM events: this code was already there
- shared helpers around Netlink code that were already there as well
- more shared Netlink commands code from pm.c will come after
- pm_kernel.c now contains only code that is specific to the in-kernel
PM. Now all functions are either called from:
- pm.c: events coming from the core, when this PM is being used
- pm_netlink.c: for shared Netlink commands
- mptcp_pm_gen.c: for Netlink commands specific to the in-kernel PM
- sockopt.c: for the exported counters per netns
- (while at it, a useless 'return;' spot by checkpatch at the end of
mptcp_pm_nl_set_flags_all, has been removed)
The code around the PM is now less confusing, which should help for the
maintenance in the long term.
This will certainly impact future backports, but because other cleanups
have already done recently, and more are coming to ease the addition of
a new path-manager controlled with BPF (struct_ops), doing that now
seems to be a good time. Also, many issues around the PM have been fixed
a few months ago while increasing the code coverage in the selftests, so
such big reorganisation can be done with more confidence now.
No behavioural changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-14-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before this patch, the PM code was dispersed in different places:
- pm.c had common code for all PMs
- pm_netlink.c was supposed to be about the in-kernel PM, but also had
exported common helpers, callbacks used by the different PMs, NL
events for PM userspace daemon, etc. quite confusing.
- pm_userspace.c had userspace PM only code, but using specific
in-kernel PM helpers
To clarify the code, a reorganisation is suggested here, only by moving
code around, and (un)exporting functions:
- helpers used from both PMs and not linked to Netlink
- callbacks used by different PMs, e.g. ADD_ADDR management
- some helpers have been marked as 'static'
- protocol.h has been updated accordingly
- (while at it, a needless if before a kfree(), spot by checkpatch in
mptcp_remove_anno_list_by_saddr(), has been removed)
The code around the PM is now less confusing, which should help for the
maintenance in the long term.
This will certainly impact future backports, but because other cleanups
have already done recently, and more are coming to ease the addition of
a new path-manager controlled with BPF (struct_ops), doing that now
seems to be a good time. Also, many issues around the PM have been fixed
a few months ago while increasing the code coverage in the selftests, so
such big reorganisation can be done with more confidence now.
No behavioural changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-13-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In prevision to another change importing all generic PM helpers from
pm_netlink.c to there.
No behavioural changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-12-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In a following commit, the 'remote_address' helper will need to be used
from different files.
It is then exported, and prefixed with 'mptcp_', similar to
'mptcp_local_address'.
No behavioural changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-11-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To make it clear what actions are in-kernel PM specific and which ones
are not and done for all PMs, e.g. sending ADD_ADDR and close associated
subflows when a RM_ADDR is received.
The behavioural is changed a bit: MPTCP_PM_ADD_ADDR_RECEIVED is now
treated after MPTCP_PM_ADD_ADDR_SEND_ACK and MPTCP_PM_RM_ADDR_RECEIVED,
but that should not change anything in practice.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-10-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When destroying an MPTCP socket, some userspace PM specific code was
called from mptcp_destroy_common() in protocol.c. That feels wrong, and
it is the only case.
Instead, the core now calls mptcp_pm_destroy() from pm.c which is now in
charge of cleaning the announced addresses list, and ask the different
PMs to do extra cleaning if needed, e.g. the userspace PM, if used, will
clean the local addresses list.
While at it, the userspace PM specific helper has been prefixed with
'mptcp_userspace_pm_' like the other ones.
No behavioural changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-9-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, in-kernel PM specific helpers are prefixed with
'mptcp_pm_nl_'. Here, '_pm' was missing from 'mptcp_nl_set_flags'.
Add '_pm' to be similar to others, and add '_all' to avoid confusions
witih the global 'mptcp_pm_nl_set_flags'.
No behavioural changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-8-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, in-kernel PM specific helpers are prefixed with
'mptcp_pm_nl_'. But here 'mptcp_pm_nl_is_init_remote_addr' is not
specific to this PM: it is called from pm.c for both the in-kernel and
userspace PMs.
To avoid confusions, the '_nl' bit has been removed from the name.
No behavioural changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-7-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, in-kernel PM specific helpers are prefixed with
'mptcp_pm_nl_'. But here 'mptcp_pm_nl_subflow_chk_stale' is not specific
to this PM: it is called from pm.c for both the in-kernel and userspace
PMs.
To avoid confusions, the '_nl' bit has been removed from the name.
No behavioural changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-6-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, in-kernel PM specific helpers are prefixed with
'mptcp_pm_nl_'. But here 'mptcp_pm_nl_rm_addr_received' is not specific
to this PM: it is called from the PM worker, and used by both the
in-kernel and userspace PMs. The helper has been renamed to
'mptcp_pm_rm_addr_recv' instead of '_received' to avoid confusions with
the one from pm.c.
mptcp_pm_nl_rm_addr_or_subflow', and 'mptcp_pm_nl_rm_subflow_received'
have been updated too for the same reason.
To avoid confusions, the '_nl' bit has been removed from the name.
While at it, the in-kernel PM specific code has been move from
mptcp_pm_rm_addr_or_subflow to a new dedicated helper, clearer.
No behavioural changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-5-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, in-kernel PM specific helpers are prefixed with
'mptcp_pm_nl_'. But here 'mptcp_pm_nl_work' is not specific to this PM:
it is called from the core to call helpers, some of them needed by both
the in-kernel and userspace PMs.
To avoid confusions, the '_nl' bit has been removed from the name.
Also used 'worker' instead of 'work', similar to protocol.c's worker.
No behavioural changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-4-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, in-kernel PM specific helpers are prefixed with
'mptcp_pm_nl_'. But here 'mptcp_pm_nl_mp_prio_send_ack()' is not
specific to this PM: it is used by both the in-kernel and userspace PMs.
To avoid confusions, the '_nl' bit has been removed from the name.
No behavioural changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-3-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, in-kernel PM specific helpers are prefixed with
'mptcp_pm_nl_'. But here 'mptcp_pm_nl_addr_send_ack()' is not specific
to this PM: it is used by both the in-kernel and userspace PMs.
To avoid confusions, the '_nl' bit has been removed from the name.
No behavioural changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-2-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>