Add getters for public members, this prepares for making struct
phy_package_shared private to phylib. Declare the getters in a new header
file phylib.h, which will be used by PHY drivers only.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/c6da0b27-4479-4717-9e16-643821b76bd8@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch is the first step in moving the PHY package related code
to its own source file. No functional change intended.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/57df5c19-fbcd-45a7-9afd-cd4f74d7fa76@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Protect ext4_release_dquot against freezing so that we
don't try to start a transaction when FS is frozen, leading
to warnings.
Further, avoid taking the freeze protection if a transaction
is already running so that we don't need end up in a deadlock
as described in
46e294efc3 ext4: fix deadlock with fs freezing and EA inodes
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20241121123855.645335-3-ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Choong Yong Liang says:
====================
Enable SGMII and 2500BASEX interface mode switching for Intel platforms
During the interface mode change, the 'phylink_major_config' function will
be triggered in phylink. The modification of the following functions will
support the switching between SGMII and 2500BASE-X interface modes for
the Intel platform:
- xpcs_switch_interface_mode: Re-initiates clause 37 auto-negotiation for
the SGMII interface mode to perform auto-negotiation.
- mac_finish: Configures the SerDes according to the interface mode.
With the above changes, the code will work as follows during the interface
mode change. The PCS will reconfigure according to the pcs_neg_mode and the
selected interface mode. Then, the MAC driver will perform SerDes
configuration in 'mac_finish' based on the selected interface mode. During
the SerDes configuration, the selected interface mode will identify TSN
lane registers from FIA and then send IPC commands to the Power Management
Controller (PMC) through the PMC driver/API. The PMC will act as a proxy to
program the PLL registers.
====================
Link: https://patch.msgid.link/20250227121522.1802832-1-yong.liang.choong@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The intel_config_serdes function was provided to handle interface mode
changes for the ADL-N platform.
The Modphy register lane was provided to configure the serdes when
changing interface modes.
Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Signed-off-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Link: https://patch.msgid.link/20250227121522.1802832-7-yong.liang.choong@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Intel platform will configure the SerDes through PMC API based on the
provided interface mode.
This patch adds several new functions below:-
- intel_tsn_lane_is_available(): This new function reads FIA lane
ownership registers and common lane registers through IPC commands
to know which lane the mGbE port is assigned to.
- intel_mac_finish(): To configure the SerDes based on the assigned
lane and latest interface mode, it sends IPC command to the PMC through
PMC driver/API. The PMC acts as a proxy for R/W on behalf of the driver.
- intel_set_reg_access(): Set the register access to the available TSN
interface.
Signed-off-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Link: https://patch.msgid.link/20250227121522.1802832-6-yong.liang.choong@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
SerDes will configure according to the provided interface mode after
finish a major reconfiguration of the interface mode.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Link: https://patch.msgid.link/20250227121522.1802832-5-yong.liang.choong@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Exports intel_pmc_ipc() for host access to the PMC IPC mailbox
- Enables the host to access specific SoC registers through the PMC
firmware using IPC commands. This access method is necessary for
registers that are not available through direct Memory-Mapped I/O (MMIO),
which is used for other accessible parts of the PMC.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Chao Qin <chao.qin@intel.com>
Signed-off-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20250227121522.1802832-4-yong.liang.choong@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The xpcs_switch_interface_mode function was introduced to handle
interface switching.
According to the XPCS datasheet, a soft reset is required to initiate
Clause 37 auto-negotiation when the XPCS switches interface modes.
When the interface mode switches from 2500BASE-X to SGMII,
re-initiating Clause 37 auto-negotiation is required for the SGMII
interface mode to function properly.
Signed-off-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Link: https://patch.msgid.link/20250227121522.1802832-3-yong.liang.choong@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The phylink_expects_phy() function allows MAC drivers to check if they are
expecting a PHY to attach. The checking condition in phylink_expects_phy()
aims to achieve the same result as the checking condition in
phylink_attach_phy().
However, the checking condition in phylink_expects_phy() uses
pl->link_config.interface, while phylink_attach_phy() uses
pl->link_interface.
Initially, both pl->link_interface and pl->link_config.interface are set
to SGMII, and pl->cfg_link_an_mode is set to MLO_AN_INBAND.
When the interface switches from SGMII to 2500BASE-X,
pl->link_config.interface is updated by phylink_major_config().
At this point, pl->cfg_link_an_mode remains MLO_AN_INBAND, and
pl->link_config.interface is set to 2500BASE-X.
Subsequently, when the STMMAC interface is taken down
administratively and brought back up, it is blocked by
phylink_expects_phy().
Since phylink_expects_phy() and phylink_attach_phy() aim to achieve the
same result, phylink_expects_phy() should check pl->link_interface,
which never changes, instead of pl->link_config.interface, which is
updated by phylink_major_config().
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Link: https://patch.msgid.link/20250227121522.1802832-2-yong.liang.choong@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
KVM recently added a capability that allows userspace to override the
'implementation ID' registers presented to the VM. MIDR_EL1 is a special
example, where the hypervisor can directly set the value when read from
EL1 using VPIDR_EL2.
Copy the VM-wide value for MIDR_EL1 into the hyp VM for non-protected
guests when the capability is enabled so VPIDR_EL2 gets set up
correctly.
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/kvmarm/ac594b9c-4bbb-46c8-9391-e7a68ce4de5b@sirena.org.uk/
Fixes: 3adaee7830 ("KVM: arm64: Allow userspace to change the implementation ID registers")
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250305230825.484091-3-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Since commit 2843cae266 ("KVM: arm64: Treat CTR_EL0 as a VM feature
ID register") KVM has allowed userspace to configure the VM-wide view of
CTR_EL0, falling back to trap-n-emulate if the value doesn't match
hardware. It appears that this has worked by chance in protected-mode
for some time, and on systems with FEAT_EVT protected-mode
unconditionally sets TID4 (i.e. TID2 traps sans CTR_EL0).
Forward the guest CTR_EL0 value through to the hyp VM and align the
TID2/TID4 configuration with the non-protected setup.
Fixes: 2843cae266 ("KVM: arm64: Treat CTR_EL0 as a VM feature ID register")
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20250305230825.484091-2-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Somehow, possibly as a result of rebase gone badly, setting
nr_indexed_regs for pre-a650 a6xx devices lost the setting of
nr_indexed_regs, resulting in values getting snapshot, but omitted
from the devcoredump.
Fixes: e997ae5f45 ("drm/msm/a6xx: Mostly implement A7xx gpu_state")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/640289/
Remap all historical and non-historical entries to my kernel.org email.
Signed-off-by: Dmitry Baryshkov <lumag@kernel.org>
Acked-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/641154/
Signed-off-by: Rob Clark <robdclark@chromium.org>
My Linaro email will stop working soon. Use @kernel.org email instead.
Signed-off-by: Dmitry Baryshkov <lumag@kernel.org>
Acked-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/641152/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fix adding a newline at the end of the usage of pr_info! in the
documentation
Fixes: e3c3d34507 ("docs: rust: Add description of Rust documentation test as KUnit ones")
Reported-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1139
Signed-off-by: Alban Kurti <kurti@invicto.ai>
Reviewed-by: David Gow <davidgow@google.com>
Link: https://lore.kernel.org/r/20250206-printing_fix-v3-1-a85273b501ae@invicto.ai
[ Replaced Closes with Link since it fixes part of the issue. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Now ->carryover_bytes[] and ->carryover_ios[] only covers limit/config
update.
Actually the carryover bytes/ios can be carried to ->bytes_disp[] and
->io_disp[] directly, since the carryover is one-shot thing and only valid
in current slice.
Then we can remove the two fields and simplify code much.
Type of ->bytes_disp[] and ->io_disp[] has to change as signed because the
two fields may become negative when updating limits or config, but both are
big enough for holding bytes/ios dispatched in single slice
Cc: Tejun Heo <tj@kernel.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20250305043123.3938491-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 29390bb566 ("blk-throttle: support prioritized processing of metadata")
takes bytes/ios carryover for prioritized processing of metadata. Turns out
we can support it by charging it directly without trimming slice, and the
result is same with carryover.
Cc: Tejun Heo <tj@kernel.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20250305043123.3938491-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The two fields are not used any more, so remove them.
Cc: Tejun Heo <tj@kernel.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20250305043123.3938491-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The bio submission time may be a few jiffies more than the expected
waiting time, due to 'extra_bytes' can't be divided in
tg_within_bps_limit(), and also due to timer wakeup delay.
In this case, adjust slice_start to jiffies will discard the extra wait time,
causing lower rate than expected.
Current in-tree code already covers deviation by rounddown(), but turns
out it is not enough, because jiffies - slice_start can be a multiple of
throtl_slice.
For example, assume bps_limit is 1000bytes, 1 jiffes is 10ms, and
slice is 20ms(2 jiffies), expected rate is 1000 / 1000 * 20 = 20 bytes
per slice.
If user issues two 21 bytes IO, then wait time will be 30ms for the
first IO:
bytes_allowed = 20, extra_bytes = 1;
jiffy_wait = 1 + 2 = 3 jiffies
and consider
extra 1 jiffies by timer, throtl_trim_slice() will be called at:
jiffies = 40ms
slice_start = 0ms, slice_end= 40ms
bytes_disp = 21
In this case, before the patch, real rate in the first two slices is
10.5 bytes per slice, and slice will be updated to:
jiffies = 40ms
slice_start = 40ms, slice_end = 60ms,
bytes_disp = 0;
Hence the second IO will have to wait another 30ms;
With the patch, the real rate in the first slice is 20 bytes per slice,
which is the same as expected, and slice will be updated:
jiffies=40ms,
slice_start = 20ms, slice_end = 60ms,
bytes_disp = 1;
And now, there is still 19 bytes allowed in the second slice, and the
second IO will only have to wait 10ms;
This problem will cause blktests throtl/001 failure in case of
CONFIG_HZ_100=y, fix it by preserving one extra finished slice in
throtl_trim_slice().
Fixes: e43473b7f2 ("blkio: Core implementation of throttle policy")
Reported-by: Ming Lei <ming.lei@redhat.com>
Closes: https://lore.kernel.org/linux-block/20250222092823.210318-3-yukuai1@huaweicloud.com/
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250227120645.812815-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ISO C's `aligned_alloc` is partially implementation-defined; on some
systems it inherits stricter requirements from POSIX's `posix_memalign`.
This causes the call added in commit dd09538fb4 ("rust: alloc:
implement `Cmalloc` in module allocator_test") to fail on macOS because
it doesn't meet the requirements of `posix_memalign`.
Adjust the call to meet the POSIX requirement and add a comment. This
fixes failures in `make rusttest` on macOS.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Cc: stable@vger.kernel.org
Fixes: dd09538fb4 ("rust: alloc: implement `Cmalloc` in module allocator_test")
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20250213-aligned-alloc-v7-1-d2a2d0be164b@gmail.com
[ Added Cc: stable. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
In commit 392e34b6bc ("kbuild: rust: remove the `alloc` crate and
`GlobalAlloc`") we stopped using the upstream `alloc` crate.
Thus remove a few leftover mentions treewide.
Cc: stable@vger.kernel.org # Also to 6.12.y after the `alloc` backport lands
Fixes: 392e34b6bc ("kbuild: rust: remove the `alloc` crate and `GlobalAlloc`")
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250303171030.1081134-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Passing a variable string as the format to dev_set_name() causes a W=1 warning:
drivers/edac/edac_device.c:736:9: error: format not a string literal and no format arguments [-Werror=format-security]
736 | ret = dev_set_name(&ctx->dev, name);
| ^~~
Use a literal "%s" instead so the name can be the argument.
Fixes: db99ea5f2c ("EDAC: Add support for EDAC device features control")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20250304143603.995820-1-arnd@kernel.org
Add the compatible bindings for the three variants of the Agilex
PCIe Hard IP.
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250221170452.875419-2-matthew.gerlach@linux.intel.com
[kwilczynski: update description within devicetree bindings]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Document the 'firmware-name' property in the device tree bindings to
support loading SE (Serial Engine) firmware from the protocol driver,
allowing for more flexible firmware management.
Co-developed-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>
Signed-off-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>
Signed-off-by: Viken Dadhaniya <quic_vdadhani@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250303124349.3474185-2-quic_vdadhani@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Lenovo ThinkPad T14s Gen6 provides external DisplayPort on all
2 USB Type-C ports. Each one of this ports is connected to a dedicated
DisplayPort controller.
Due to support missing in the USB/DisplayPort combo PHY driver,
the external DisplayPort is limited to 2 lanes.
So enable the first and second DisplayPort controllers and limit their
data lanes number to 2.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20250304-x1e80100-dts-crd-t14s-enable-typec-retimers-v6-4-e5a49fae4e94@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Lenovo ThinkPad T14s Gen6 laptop comes with 3 Parade PS8830 retimers,
one for each Type-C port. These handle the orientation and altmode
switching and are controlled over I2C. In the connection chain, they sit
between the USB/DisplayPort combo PHY and the Type-C connector.
Describe the retimers and all gpio controlled voltage regulators used by
each retimer. Also, modify the pmic glink graph to include the retimers in
between the SuperSpeed/Sideband in endpoints and the QMP PHY out
endpoints.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20250304-x1e80100-dts-crd-t14s-enable-typec-retimers-v6-3-e5a49fae4e94@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The X Elite CRD provides external DisplayPort on all 3 USB Type-C ports.
Each one of this ports is connected to a dedicated DisplayPort
controller.
Due to support missing in the USB/DisplayPort combo PHY driver,
the external DisplayPort is limited to 2 lanes.
So enable all 3 remaining DisplayPort controllers and limit their data
lanes number to 2.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20250304-x1e80100-dts-crd-t14s-enable-typec-retimers-v6-2-e5a49fae4e94@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The X Elite CRD board comes with 3 Parade PS8830 retimers, one for each
Type-C port. These handle the orientation and altmode switching and are
controlled over I2C. In the connection chain, they sit between the
USB/DisplayPort combo PHY and the Type-C connector.
Describe the retimers and all gpio controlled voltage regulators used by
each retimer. Also, modify the pmic glink graph to include the retimers in
between the SuperSpeed/Sideband in endpoints and the QMP PHY out endpoints.
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20250304-x1e80100-dts-crd-t14s-enable-typec-retimers-v6-1-e5a49fae4e94@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
These regulators power some electronic components onboard. They're
most likely kept online by other pieces of firmware, but you can never
be sure enough.
Fixes: 09d77be560 ("arm64: dts: qcom: Add support for X1-based Surface Laptop 7 devices")
Reported-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250304-topic-sl7_vregs_aon-v1-1-b2dc706e4157@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
With PWRSTS_OFF_ON, USB GDSCs are turned off during gdsc_disable(). This
can happen during scenarios such as system suspend and breaks the resume
of USB controller from suspend.
So use PWRSTS_RET_ON to indicate the GDSC driver to not turn off the GDSCs
during gdsc_disable() and allow the hardware to transition the GDSCs to
retention when the parent domain enters low power state during system
suspend.
Fixes: c58225b7e3 ("clk: qcom: add the SM8650 Global Clock Controller driver, part 1")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250305-topic-sm8650-upstream-fix-usb-suspend-v1-1-649036ab0557@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
dev_err_probe() exists to simplify code and harmonise error messages,
there's no reason not to use it here.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250304-rtc-cleanups-v2-16-d4689a71668c@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
dev_err_probe() exists to simplify code and harmonise error messages,
there's no reason not to use it here.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250304-rtc-cleanups-v2-15-d4689a71668c@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The memory pointed to by the ::rtc member is managed via devres, and
no code in this driver uses it past _probe().
We can drop it from the structure and just use a local temporary
variable, reducing runtime memory consumption by a few bytes.
Since this now means that the structure has just one member only left,
there is no need anymore to allocate data for it and pass that around
via the various callbacks, just to extract that one member.
Instead, we can just pass that one member and avoid the extra memory
allocation for the containing struct, reducing runtime memory
consumption.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250304-rtc-cleanups-v2-14-d4689a71668c@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The memory pointed to by the ::rtc member is managed via devres, and
no code in this driver uses it past _probe().
We can drop it from the structure and just use a local temporary
variable, reducing runtime memory consumption by a few bytes.
Tested-by: Tóth János <gomba007@gmail.com>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250304-rtc-cleanups-v2-13-d4689a71668c@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The memory pointed to by the ::rtc member is managed via devres, and
no code in this driver uses it past _probe().
We can drop it from the structure and just use a local temporary
variable, reducing runtime memory consumption by a few bytes.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250304-rtc-cleanups-v2-12-d4689a71668c@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The memory pointed to by the ::rtc member is managed via devres, and
no code in this driver uses it past _probe().
We can drop it from the structure and just use a local temporary
variable, reducing runtime memory consumption by a few bytes.
Since this now means that the structure has just one member only left,
there is no need anymore to allocate data for it and pass that around
via the various callbacks, just to extract that one member.
Instead, we can just pass that one member and avoid the extra memory
allocation for the containing struct, reducing runtime memory
consumption.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250304-rtc-cleanups-v2-11-d4689a71668c@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The memory pointed to by the ::rtc member is managed via devres, and
no code in this driver uses it past _probe().
We can drop it from the structure and just use a local temporary
variable, reducing runtime memory consumption by a few bytes.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250304-rtc-cleanups-v2-10-d4689a71668c@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The memory pointed to by the ::rtc member is managed via devres, and
no code in this driver uses it past _probe().
We can drop it from the structure and just use a local temporary
variable, reducing runtime memory consumption by a few bytes.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250304-rtc-cleanups-v2-9-d4689a71668c@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The memory pointed to by the ::rtc member is managed via devres, and
no code in this driver uses it past _probe().
We can drop it from the structure and just use a local temporary
variable, reducing runtime memory consumption by a few bytes.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250304-rtc-cleanups-v2-8-d4689a71668c@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The memory pointed to by the ::rtc member is managed via devres, and
no code in this driver uses it past _probe().
We can drop it from the structure and just use a local temporary
variable, reducing runtime memory consumption by a few bytes.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250304-rtc-cleanups-v2-7-d4689a71668c@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The memory pointed to by the ::rtc_dev member is managed via devres,
and no code in this driver uses it past _probe().
We can drop it from the structure and just use a local temporary
variable, reducing runtime memory consumption by a few bytes.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250304-rtc-cleanups-v2-6-d4689a71668c@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The memory pointed to by the ::rtc member is managed via devres, and
no code in this driver uses it past _probe().
We can drop it from the structure and just use a local temporary
variable, reducing runtime memory consumption by a few bytes.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250304-rtc-cleanups-v2-5-d4689a71668c@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The memory pointed to by the ::rtc member is managed via devres, and
no code in this driver uses it past _probe().
We can drop it from the structure and just use a local temporary
variable, reducing runtime memory consumption by a few bytes.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250304-rtc-cleanups-v2-4-d4689a71668c@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The memory pointed to by the ::rtc_dev member is managed via devres,
and no code in this driver uses it past _probe().
We can drop it from the structure and just use a local temporary
variable, reducing runtime memory consumption by a few bytes.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250304-rtc-cleanups-v2-3-d4689a71668c@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>