There's no need to care about pending or credit counters when we
already disconnecting.
And all related wait_event conditions already check for broken
connections too.
This will simplify the code and makes the following changes simpler.
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This will be used to implement a logic in order to make sure
we don't overflow the send submission queue for ib_post_send().
We will initialize the local credits with the
fixed sp->send_credit_target value, which matches
the reserved slots in the submission queue for ib_post_send().
We will be a local credit first and then wait for a remote credit,
if we managed to get both we are allowed to post an
IB_WR_SEND[_WITH_INV]. The local credit is given back to
the pool when we get the local ib_post_send() completion,
while remote credits are granted by the peer.
From reading the git history of the linux smbdirect
implementations in client and server) it was seen
that a peer granted more credits than we requested.
I guess that only happened because of bugs in our
implementation which was active as client and server.
I guess Windows won't do that.
So the local credits make sure we only use the amount
of credits we asked for.
The client already has some logic for this based on
smbdirect_socket.send_io.pending.count, but that
counts in the order direction and makes it complex it
share common logic for various credits classes.
That logic will be replaced soon.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Make use of rdma_rw_mr_factor() to calculate the number of rw
credits and the number of pages per RDMA RW operation.
We get the same numbers for iWarp connections, tested
with siw.ko and irdma.ko (in iWarp mode).
siw:
CIFS: max_qp_rd_atom=128, max_fast_reg_page_list_len = 256
CIFS: max_sgl_rd=0, max_sge_rd=1
CIFS: responder_resources=32 max_frmr_depth=256 mr_io.type=0
CIFS: max_send_wr 384, device reporting max_cqe 3276800 max_qp_wr 32768
ksmbd: max_fast_reg_page_list_len = 256, max_sgl_rd=0, max_sge_rd=1
ksmbd: device reporting max_cqe 3276800 max_qp_wr 32768
ksmbd: Old sc->rw_io.credits: max = 9, num_pages = 256
ksmbd: New sc->rw_io.credits: max = 9, num_pages = 256, maxpages=2048
ksmbd: Info: rdma_send_wr 27 + max_send_wr 256 = 283
irdma (in iWarp mode):
CIFS: max_qp_rd_atom=127, max_fast_reg_page_list_len = 262144
CIFS: max_sgl_rd=0, max_sge_rd=13
CIFS: responder_resources=32 max_frmr_depth=2048 mr_io.type=0
CIFS: max_send_wr 384, device reporting max_cqe 1048574 max_qp_wr 4063
ksmbd: max_fast_reg_page_list_len = 262144, max_sgl_rd=0, max_sge_rd=13
ksmbd: device reporting max_cqe 1048574 max_qp_wr 4063
ksmbd: Old sc->rw_io.credits: max = 9, num_pages = 256
ksmbd: New sc->rw_io.credits: max = 9, num_pages = 256, maxpages=2048
ksmbd: rdma_send_wr 27 + max_send_wr 256 = 283
This means that we get the different correct numbers for ROCE,
tested with rdma_rxe.ko and irdma.ko (in RoCEv2 mode).
rxe:
CIFS: max_qp_rd_atom=128, max_fast_reg_page_list_len = 512
CIFS: max_sgl_rd=0, max_sge_rd=32
CIFS: responder_resources=32 max_frmr_depth=512 mr_io.type=0
CIFS: max_send_wr 384, device reporting max_cqe 32767 max_qp_wr 1048576
ksmbd: max_fast_reg_page_list_len = 512, max_sgl_rd=0, max_sge_rd=32
ksmbd: device reporting max_cqe 32767 max_qp_wr 1048576
ksmbd: Old sc->rw_io.credits: max = 9, num_pages = 256
ksmbd: New sc->rw_io.credits: max = 65, num_pages = 32, maxpages=2048
ksmbd: rdma_send_wr 65 + max_send_wr 256 = 321
irdma (in RoCEv2 mode):
CIFS: max_qp_rd_atom=127, max_fast_reg_page_list_len = 262144,
CIFS: max_sgl_rd=0, max_sge_rd=13
CIFS: responder_resources=32 max_frmr_depth=2048 mr_io.type=0
CIFS: max_send_wr 384, device reporting max_cqe 1048574 max_qp_wr 4063
ksmbd: max_fast_reg_page_list_len = 262144, max_sgl_rd=0, max_sge_rd=13
ksmbd: device reporting max_cqe 1048574 max_qp_wr 4063
ksmbd: Old sc->rw_io.credits: max = 9, num_pages = 256,
ksmbd: New sc->rw_io.credits: max = 159, num_pages = 13, maxpages=2048
ksmbd: rdma_send_wr 159 + max_send_wr 256 = 415
And rely on rdma_rw_init_qp() to setup ib_mr_pool_init() for
RW MRs. ib_mr_pool_destroy() will be called by rdma_rw_cleanup_mrs().
It seems the code was implemented before the rdma_rw_* layer
was fully established in the kernel.
While there also add additional space for ib_drain_qp().
This should make sure ib_post_send() will never fail
because the submission queue is full.
Fixes: ddbdc861e3 ("ksmbd: smbd: introduce read/write credits for RDMA read/write")
Fixes: 4c564f03e2 ("smb: server: make use of common smbdirect_socket")
Fixes: 177368b992 ("smb: server: make use of common smbdirect_socket_parameters")
Fixes: 95475d8886 ("smb: server: make use smbdirect_socket.rw_io.credits")
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
All driver fixes. The big change is the storvsc one to rejig the
hyper-v channel handling to be more efficient for SMP virtual
machines.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCaPkVaxsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMSwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy
c2hpcC5jb20ACgkQ50LJTO6YrIViLgD+L8yF/GV9a3JzXbdaM24RzhgR9c4exIrG
XlHyqBIl6nAA/0Vj2vNNRNMGe0NCJJ7qyWFfH9ecYrqASa+9NQnjBfL8
=8LEK
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"All driver fixes. The big change is the storvsc one to rejig the
hyper-v channel handling to be more efficient for SMP virtual
machines"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: phy: dt-bindings: Add QMP UFS PHY compatible for Kaanapali
scsi: ufs: qcom: dt-bindings: Document the Kaanapali UFS controller
scsi: libfc: Prevent integer overflow in fc_fcp_recv_data()
scsi: qla4xxx: Fix typos in comments
scsi: storvsc: Prefer returning channel with the same CPU as on the I/O issuing CPU
There's a two-patch DAMON series from SeongJae Park which addresses a
missed check and possible memory leak. Apart from that it's all
singletons - please see the changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaPkz/QAKCRDdBJ7gKXxA
js6eAQCdnA10LouzzVdqA+HuYh206z8qE2KGsGKpUGDfJv40uAEA4ZbxYrMJmwhU
MXFn7Czphh/NOfFFCnrDnOlAFH7MmQc=
=hc/P
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2025-10-22-12-43' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"17 hotfixes. 12 are cc:stable and 14 are for MM.
There's a two-patch DAMON series from SeongJae Park which addresses a
missed check and possible memory leak. Apart from that it's all
singletons - please see the changelogs for details"
* tag 'mm-hotfixes-stable-2025-10-22-12-43' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
csky: abiv2: adapt to new folio flags field
mm/damon/core: use damos_commit_quota_goal() for new goal commit
mm/damon/core: fix potential memory leak by cleaning ops_filter in damon_destroy_scheme
hugetlbfs: move lock assertions after early returns in huge_pmd_unshare()
vmw_balloon: indicate success when effectively deflating during migration
mm/damon/core: fix list_add_tail() call on damon_call()
mm/mremap: correctly account old mapping after MREMAP_DONTUNMAP remap
mm: prevent poison consumption when splitting THP
ocfs2: clear extent cache after moving/defragmenting extents
mm: don't spin in add_stack_record when gfp flags don't allow
dma-debug: don't report false positives with DMA_BOUNCE_UNALIGNED_KMALLOC
mm/damon/sysfs: dealloc commit test ctx always
mm/damon/sysfs: catch commit test ctx alloc failure
hung_task: fix warnings caused by unaligned lock pointers
The target code should set the sc_c bit in calculating the host response
based on the status of the 'concat' setting, otherwise we'll get an
authentication mismatch for hosts setting that bit correctly.
Fixes: 7e091add9c ("nvme-auth: update sc_c in host response")
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Make acpi_button_add() call input_free_device() when
input_register_device() fails as required according to the
documentation of the latter.
Fixes: 0d51157dfa ("ACPI: button: Eliminate the driver notify callback")
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Cc: 6.5+ <stable@vger.kernel.org> # 6.5+
[ rjw: Subject and changelog rewrite, Fixes: tag ]
Link: https://patch.msgid.link/20251006084706.971855-1-kaushlendra.kumar@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
While the user manual states that the PLL's rate should be between 180
MHz and 3 GHz in the register defninition section, it also says the
actual operating frequency is 22.5792*4 MHz in the PLL features table.
22.5792*4 MHz is one of the actual clock rates that we want and is
is available in the SDM table. Lower the minimum clock rate to 90 MHz
so that both rates in the SDM table can be used.
Fixes: 7cae1e2b55 ("clk: sunxi-ng: Add support for the A523/T527 CCU PLLs")
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251020171059.2786070-7-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
The "bus-r-dma" clock in the A523's PRCM clock controller is also
referred to as "DMA_CLKEN_SW" or "DMA ADB400 gating". It is unclear how
this ties into the DMA controller MBUS clock gate; however if the clock
is not enabled, the DMA controller in the MCU block will fail to access
DRAM, even failing to retrieve the DMA descriptors.
Mark this clock as critical. This sort of mirrors what is done for the
main DMA controller's MBUS clock, which has a separate toggle that is
currently left out of the main clock controller driver.
Fixes: 8cea339cfb ("clk: sunxi-ng: add support for the A523/T527 PRCM CCU")
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251020171059.2786070-6-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Same as [1] but also with netdev@ as an additional mailing list.
io_uring zero copy receive is of particular interest to netdev
participants too, given its tight integration to netdev core.
With this updated entry, folks running get_maintainer.pl on patches that
touch io_uring/zcrx.* will know to send it to netdev@ as well.
Note that this doesn't mean all changes require explicit acks from
netdev; this is purely for wider visibility and for other contributors
to know where to send patches.
[1]: https://lore.kernel.org/io-uring/989528e611b51d71fb712691ebfb76d2059ba561.1755461246.git.asml.silence@gmail.com/
Signed-off-by: David Wei <dw@davidwei.uk>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Mina Almasry <almasrymina@google.com>
[axboe: use correct io_uring tree URL]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix the indentation to ensure consistent code style and improve
readability and to fix the errors:
ERROR: code indent should use tabs where possible
+ return io_net_import_vec(req, kmsg, sr->buf, sr->len, ITER_SOURCE);$
ERROR: code indent should use tabs where possible
+^I^I^I struct io_big_cqe *big_cqe)$
Tested by running the /scripts/checkpatch.pl
Signed-off-by: Ranganath V N <vnranganath.20@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The current approach is a bit naive, and hence calls the time querying
way too often. Only start the "doing work" timer when there's actual
work to do, and then use that information to terminate (and account) the
work time once done. This greatly reduces the frequency of these calls,
when they cannot have changed anyway.
Running a basic random reader that is setup to use SQPOLL, a profile
before this change shows these as the top cycle consumers:
+ 32.60% iou-sqp-1074 [kernel.kallsyms] [k] thread_group_cputime_adjusted
+ 19.97% iou-sqp-1074 [kernel.kallsyms] [k] thread_group_cputime
+ 12.20% io_uring io_uring [.] submitter_uring_fn
+ 4.13% iou-sqp-1074 [kernel.kallsyms] [k] getrusage
+ 2.45% iou-sqp-1074 [kernel.kallsyms] [k] io_submit_sqes
+ 2.18% iou-sqp-1074 [kernel.kallsyms] [k] __pi_memset_generic
+ 2.09% iou-sqp-1074 [kernel.kallsyms] [k] cputime_adjust
and after this change, top of profile looks as follows:
+ 36.23% io_uring io_uring [.] submitter_uring_fn
+ 23.26% iou-sqp-819 [kernel.kallsyms] [k] io_sq_thread
+ 10.14% iou-sqp-819 [kernel.kallsyms] [k] io_sq_tw
+ 6.52% iou-sqp-819 [kernel.kallsyms] [k] tctx_task_work_run
+ 4.82% iou-sqp-819 [kernel.kallsyms] [k] nvme_submit_cmds.part.0
+ 2.91% iou-sqp-819 [kernel.kallsyms] [k] io_submit_sqes
[...]
0.02% iou-sqp-819 [kernel.kallsyms] [k] cputime_adjust
where it's spending the cycles on things that actually matter.
Reported-by: Fengnan Chang <changfengnan@bytedance.com>
Cc: stable@vger.kernel.org
Fixes: 3fcb9d1720 ("io_uring/sqpoll: statistics of the true utilization of sq threads")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
getrusage() does a lot more than what the SQPOLL accounting needs, the
latter only cares about (and uses) the stime. Rather than do a full
RUSAGE_SELF summation, just query the used stime instead.
Cc: stable@vger.kernel.org
Fixes: 3fcb9d1720 ("io_uring/sqpoll: statistics of the true utilization of sq threads")
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
According to Maciej W. Rozycki <macro@orcam.me.uk>, the
mips_pcibios_init() for malta adjusts root bus IO resource start
address to prevent interfering with PIIX4 I/O cycle decoding. Adjusting
lower bound leaves PIIX4 IO resources outside of the root bus resource
and assign_fixed_resource_on_bus() does not link the resources into the
resource tree.
Prior to commit ae81aad5c2 ("MIPS: PCI: Use pci_enable_resources()") the
arch specific pcibios_enable_resources() did not check if the resources
were assigned which diverges from what PCI core checks, effectively hiding
the PIIX4 IO resources were not properly within the resource tree. After
starting to use pcibios_enable_resources() from PCI core, enabling PIIX4
fails:
ata_piix 0000:00:0a.1: BAR 0 [io 0x01f0-0x01f7]: not claimed; can't enable device
ata_piix 0000:00:0a.1: probe with driver ata_piix failed with error -22
MIPS PCI code already has support for enforcing lower bounds using
PCIBIOS_MIN_IO in pcibios_align_resource() without altering the IO window
start address itself. Make malta PCI code too to use PCIBIOS_MIN_IO.
Fixes: ae81aad5c2 ("MIPS: PCI: Use pci_enable_resources()")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/linux-pci/9085ab12-1559-4462-9b18-f03dcb9a4088@roeck-us.net/
Suggested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/linux-pci/alpine.DEB.2.21.2510132229120.39634@angie.orcam.me.uk/
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Link: https://patch.msgid.link/20251017110903.1973-1-ilpo.jarvinen@linux.intel.com
Covering the PCI southbridge legacy port I/O range with a northbridge
resource reservation prevents MIPS Malta platform code from claiming its
standard legacy resources. This is because request_resource() calls
cause a clash with the previous reservation and consequently fail.
Change to using insert_resource() so as to prevent the clash, switching
the legacy reservations from:
00000000-00ffffff : MSC PCI I/O
00000020-00000021 : pic1
00000070-00000077 : rtc0
000000a0-000000a1 : pic2
[...]
to:
00000000-00ffffff : MSC PCI I/O
00000000-0000001f : dma1
00000020-00000021 : pic1
00000040-0000005f : timer
00000060-0000006f : keyboard
00000070-00000077 : rtc0
00000080-0000008f : dma page reg
000000a0-000000a1 : pic2
000000c0-000000df : dma2
[...]
Fixes: ae81aad5c2 ("MIPS: PCI: Use pci_enable_resources()")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: stable@vger.kernel.org # v6.18+
Link: https://patch.msgid.link/alpine.DEB.2.21.2510212001250.8377@angie.orcam.me.uk
MIPS Malta platform code registers the PCI southbridge legacy port I/O
PS/2 keyboard range as a standard resource marked as busy. It prevents
the i8042 driver from registering as it fails to claim the resource in
a call to i8042_platform_init(). Consequently PS/2 keyboard and mouse
devices cannot be used with this platform.
Fix the issue by removing the busy marker from the standard reservation,
making the driver register successfully:
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
and the resource show up as expected among the legacy devices:
00000000-00ffffff : MSC PCI I/O
00000000-0000001f : dma1
00000020-00000021 : pic1
00000040-0000005f : timer
00000060-0000006f : keyboard
00000060-0000006f : i8042
00000070-00000077 : rtc0
00000080-0000008f : dma page reg
000000a0-000000a1 : pic2
000000c0-000000df : dma2
[...]
If the i8042 driver has not been configured, then the standard resource
will remain there preventing any conflicting dynamic assignment of this
PCI port I/O address range.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/alpine.DEB.2.21.2510211919240.8377@angie.orcam.me.uk
The block layer PI generation / verification code expects the bio_vecs
to have at least LBA size (or more correctly integrity internal)
granularity. With the direct I/O alignment relaxation in 2022, user
space can now feed bios with less alignment than that, leading to
scribbling outside the PI buffers. Apparently this wasn't noticed so far
because none of the tests generate such buffers, but since 851c4c96db
("xfs: implement XFS_IOC_DIOINFO in terms of vfs_getattr"), xfstests
generic/013 by default generates such I/O now that the relaxed alignment
is advertised by the XFS_IOC_DIOINFO ioctl.
Fix this by increasing the required alignment when using PI, although
handling arbitrary alignment in the long run would be even nicer.
Fixes: bf8d08532b ("iomap: add support for dma aligned direct-io")
Fixes: b1a000d3b8 ("block: relax direct io memory alignment")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix warning caused from declaration under a case label. The proper way
is to declare variable at the beginning of the function. The warning
came from running clang using LLVM=1; and is as follows:
-test_cachestat.c:260:3: warning: label followed by a declaration is a C23 extension [-Wc23-extensions]
260 | char *map = mmap(NULL, filesize, PROT_READ | PROT_WRITE,
|
Link: https://lore.kernel.org/r/20250929115405.25695-2-sidharthseela@gmail.com
Signed-off-by: Sidharth Seela <sidharthseela@gmail.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Reviewed-by: wang lian <lianux.mm@gmail.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Fixes and New HW Support
- alienware-wmi-wmax:
- Fix NULL pointer dereference in sleep handlers
- Add AWCC support to Dell G15 5530
- mellanox: mlxbf-pmc: add sysfs_attr_init() to count_clock init
The following is an automated shortlog grouped by driver:
alienware-wmi-wmax:
- Add AWCC support to Dell G15 5530
- Fix NULL pointer dereference in sleep handlers
MAINTAINERS:
- add Denis Benato as maintainer for asus notebooks
mlxbf-pmc:
- add sysfs_attr_init() to count_clock init
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCaPi6MgAKCRBZrE9hU+XO
MaqTAQCLVgEaRPr3osLOF17NlJPSOr/5ad4P5t49WsYqrGIqugEAg6p42Ip+afO9
2jN4aKckHu2J2p1qvGeImtr/ZO7iQg0=
=NSpX
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- alienware-wmi-wmax:
- Fix NULL pointer dereference in sleep handlers
- Add AWCC support to Dell G15 5530
- mellanox: mlxbf-pmc: add sysfs_attr_init() to count_clock init
* tag 'platform-drivers-x86-v6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: alienware-wmi-wmax: Add AWCC support to Dell G15 5530
MAINTAINERS: add Denis Benato as maintainer for asus notebooks
platform/mellanox: mlxbf-pmc: add sysfs_attr_init() to count_clock init
platform/x86: alienware-wmi-wmax: Fix NULL pointer dereference in sleep handlers
This reverts the problematic commit instead of trying to fix it in a
rush
-----BEGIN PGP SIGNATURE-----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=bIeR
-----END PGP SIGNATURE-----
Merge tag '9p-for-6.18-rc3-v2' of https://github.com/martinetd/linux
Pull 9pfs fix from Dominique Martinet:
"Fix 9p cache=mmap regression by revert
This reverts the problematic commit instead of trying to fix it in a
rush"
* tag '9p-for-6.18-rc3-v2' of https://github.com/martinetd/linux:
Revert "fs/9p: Refresh metadata in d_revalidate for uncached mode too"
If of_genpd_add_provider_onecell() fails during probe, the previously
created generic power domains are not removed, leading to a memory leak
and potential kernel crash later in genpd_debug_add().
Add proper error handling to unwind the initialized domains before
returning from probe to ensure all resources are correctly released on
failure.
Example crash trace observed without this fix:
| Unable to handle kernel paging request at virtual address fffffffffffffc70
| CPU: 1 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.18.0-rc1 #405 PREEMPT
| Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform
| pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : genpd_debug_add+0x2c/0x160
| lr : genpd_debug_init+0x74/0x98
| Call trace:
| genpd_debug_add+0x2c/0x160 (P)
| genpd_debug_init+0x74/0x98
| do_one_initcall+0xd0/0x2d8
| do_initcall_level+0xa0/0x140
| do_initcalls+0x60/0xa8
| do_basic_setup+0x28/0x40
| kernel_init_freeable+0xe8/0x170
| kernel_init+0x2c/0x140
| ret_from_fork+0x10/0x20
Fixes: 898216c97e ("firmware: arm_scmi: add device power domain support using genpd")
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
In of_msi_get_domain() if the iterator loop stops early because an
irq_domain match is detected, an of_node_put() on the iterator node is
needed to keep the OF node refcount in sync.
Add it.
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Cc: Rob Herring <robh@kernel.org>
Link: https://patch.msgid.link/20251021124103.198419-3-lpieralisi@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
In some legacy platforms the MSI controller for a PCI host bridge is
identified by an msi-parent property whose phandle points at an MSI
controller node with no #msi-cells property, that implicitly
means #msi-cells == 0.
For such platforms, mapping a device ID and retrieving the MSI controller
node becomes simply a matter of checking whether in the device hierarchy
there is an msi-parent property pointing at an MSI controller node with
such characteristics.
Add a helper function to of_msi_xlate() to check the msi-parent property in
addition to msi-map and retrieve the MSI controller node (with a 1:1 ID
deviceID-IN<->deviceID-OUT mapping) to provide support for deviceID
mapping and MSI controller node retrieval for such platforms.
Fixes: 57d72196df ("irqchip/gic-v5: Add GICv5 ITS support")
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Cc: Sascha Bischoff <sascha.bischoff@arm.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Link: https://patch.msgid.link/20251021124103.198419-2-lpieralisi@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The SPI controller found in the RK3506 SoC is still compatible to the
original one introduced with the RK3066, so add the RK3506 compatible
to the list of its variants.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20251022004200.204276-1-heiko@sntech.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix compilation failure when compiling the kernel with the x32 toolchain.
In file included from check.c:16:
check.c: In function ¡check_abs_references¢:
/usr/src/git/linux-2.6/tools/objtool/include/objtool/warn.h:47:17: error: format ¡%lx¢ expects argument of type ¡long unsigned int¢, but argument 7 has type ¡u64¢ {aka ¡long
long unsigned int¢} [-Werror=format=]
47 | "%s%s%s: objtool" extra ": " format "\n", \
| ^~~~~~~~~~~~~~~~~
/usr/src/git/linux-2.6/tools/objtool/include/objtool/warn.h:54:9: note: in expansion of macro ¡___WARN¢
54 | ___WARN(severity, "", format, ##__VA_ARGS__)
| ^~~~~~~
/usr/src/git/linux-2.6/tools/objtool/include/objtool/warn.h:74:27: note: in expansion of macro ¡__WARN¢
74 | #define WARN(format, ...) __WARN(WARN_STR, format, ##__VA_ARGS__)
| ^~~~~~
check.c:4713:33: note: in expansion of macro ¡WARN¢
4713 | WARN("section %s has absolute relocation at offset 0x%lx",
| ^~~~
Fixes: 0d6e4563fc ("objtool: Add action to check for absence of absolute relocations")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://patch.msgid.link/1ac32fff-2e67-5155-f570-69aad5bf5412@redhat.com
Between Rust 1.79 and 1.86, under `CONFIG_RUST_KERNEL_DOCTESTS=y`,
`objtool` may report:
rust/doctests_kernel_generated.o: warning: objtool:
rust_doctest_kernel_alloc_kbox_rs_13() falls through to next
function rust_doctest_kernel_alloc_kvec_rs_0()
(as well as in rust_doctest_kernel_alloc_kvec_rs_0) due to calls to the
`noreturn` symbol:
core::option::expect_failed
from code added in commits 779db37373 ("rust: alloc: kvec: implement
AsPageIter for VVec") and 671618432f ("rust: alloc: kbox: implement
AsPageIter for VBox").
Thus add the mangled one to the list so that `objtool` knows it is
actually `noreturn`.
This can be reproduced as well in other versions by tweaking the code,
such as the latest stable Rust (1.90.0).
Stable does not have code that triggers this, but it could have it in
the future. Downstream forks could too. Thus tag it for backport.
See commit 56d680dd23 ("objtool/rust: list `noreturn` Rust functions")
for more details.
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Cc: stable@vger.kernel.org # Needed in 6.12.y and later.
Link: https://patch.msgid.link/20251020020714.2511718-1-ojeda@kernel.org
Matteo reported hitting the assert_list_leaf_cfs_rq() warning from
enqueue_task_fair() post commit fe8d238e64 ("sched/fair: Propagate
load for throttled cfs_rq") which transitioned to using
cfs_rq_pelt_clock_throttled() check for leaf cfs_rq insertions in
propagate_entity_cfs_rq().
The "cfs_rq->pelt_clock_throttled" flag is used to indicate if the
hierarchy has its PELT frozen. If a cfs_rq's PELT is marked frozen, all
its descendants should have their PELT frozen too or weird things can
happen as a result of children accumulating PELT signals when the
parents have their PELT clock stopped.
Another side effect of this is the loss of integrity of the leaf cfs_rq
list. As debugged by Aaron, consider the following hierarchy:
root(#)
/ \
A(#) B(*)
|
C <--- new cgroup
|
D <--- new cgroup
# - Already on leaf cfs_rq list
* - Throttled with PELT frozen
The newly created cgroups don't have their "pelt_clock_throttled" signal
synced with cgroup B. Next, the following series of events occur:
1. online_fair_sched_group() for cgroup D will call
propagate_entity_cfs_rq(). (Same can happen if a throttled task is
moved to cgroup C and enqueue_task_fair() returns early.)
propagate_entity_cfs_rq() adds the cfs_rq of cgroup C to
"rq->tmp_alone_branch" since its PELT clock is not marked throttled
and cfs_rq of cgroup B is not on the list.
cfs_rq of cgroup B is skipped since its PELT is throttled.
root cfs_rq already exists on cfs_rq leading to
list_add_leaf_cfs_rq() returning early.
The cfs_rq of cgroup C is left dangling on the
"rq->tmp_alone_branch".
2. A new task wakes up on cgroup A. Since the whole hierarchy is already
on the leaf cfs_rq list, list_add_leaf_cfs_rq() keeps returning early
without any modifications to "rq->tmp_alone_branch".
The final assert_list_leaf_cfs_rq() in enqueue_task_fair() sees the
dangling reference to cgroup C's cfs_rq in "rq->tmp_alone_branch".
!!! Splat !!!
Syncing the "pelt_clock_throttled" indicator with parent cfs_rq is not
enough since the new cfs_rq is not yet enqueued on the hierarchy. A
dequeue on other subtree on the throttled hierarchy can freeze the PELT
clock for the parent hierarchy without setting the indicators for this
newly added cfs_rq which was never enqueued.
Since there are no tasks on the new hierarchy, start a cfs_rq on a
throttled hierarchy with its PELT clock throttled. The first enqueue, or
the distribution (whichever happens first) will unfreeze the PELT clock
and queue the cfs_rq on the leaf cfs_rq list.
While at it, add an assert_list_leaf_cfs_rq() in
propagate_entity_cfs_rq() to catch such cases in the future.
Closes: https://lore.kernel.org/lkml/58a587d694f33c2ea487c700b0d046fa@codethink.co.uk/
Fixes: e1fad12dcb ("sched/fair: Switch to task based throttle model")
Reported-by: Matteo Martelli <matteo.martelli@codethink.co.uk>
Suggested-by: Aaron Lu <ziqianlu@bytedance.com>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Aaron Lu <ziqianlu@bytedance.com>
Tested-by: Aaron Lu <ziqianlu@bytedance.com>
Tested-by: Matteo Martelli <matteo.martelli@codethink.co.uk>
Link: https://patch.msgid.link/20251021053522.37583-1-kprateek.nayak@amd.com
Some MediaTek SoCs got a gated UART baud clock, which currently gets
disabled as the clk subsystem believes it would be unused. This results in
the uart freezing right after "clk: Disabling unused clocks" on those
platforms.
Request the baud clock to be prepared and enabled during probe, and to
restore run-time power management capabilities to what it was before commit
e32a83c70c ("serial: 8250-mtk: modify mtk uart power and clock
management") disable and unprepare the baud clock when suspending the UART,
prepare and enable it again when resuming it.
Fixes: e32a83c70c ("serial: 8250-mtk: modify mtk uart power and clock management")
Fixes: b6c7ff2693 ("serial: 8250_mtk: Simplify clock sequencing and runtime PM")
Cc: stable <stable@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/de5197ccc31e1dab0965cabcc11ca92e67246cf6.1758058441.git.daniel@makrotopia.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Check the return value of reset_control_deassert() in the probe
function to prevent continuing probe when reset deassertion fails.
Previously, reset_control_deassert() was called without checking its
return value, which could lead to probe continuing even when the
device reset wasn't properly deasserted.
The fix checks the return value and returns an error with dev_err_probe()
if reset deassertion fails, providing better error handling and
diagnostics.
Fixes: acbdad8dd1 ("serial: 8250_dw: simplify optional reset handling")
Cc: stable <stable@kernel.org>
Signed-off-by: Artem Shimko <a.shimko.dev@gmail.com>
Link: https://patch.msgid.link/20251019095131.252848-1-a.shimko.dev@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The SCIF instances on R-Car Gen5 have a single interrupt, just like on
other R-Car SoCs.
Fixes: 6ac1d60473 ("dt-bindings: serial: sh-sci: Document r8a78000 bindings")
Cc: stable <stable@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/09bc9881b31bdb948ce8b69a2b5acf633f5505a4.1759920441.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 43c51bb573 ("sc16is7xx: make sure device is in suspend once
probed") permanently enabled access to the enhanced features in
sc16is7xx_probe(), and it is never disabled after that.
Therefore, remove re-enable of enhanced features in
sc16is7xx_set_baud(). This eliminates a potential useless read + write
cycle each time the baud rate is reconfigured.
Fixes: 43c51bb573 ("sc16is7xx: make sure device is in suspend once probed")
Cc: stable <stable@kernel.org>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://patch.msgid.link/20251006142002.177475-1-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Advantech 2-port serial card with PCI vendor=0x13fe and device=0x0018
has a 'XR17V35X' chip installed on the circuit board. Therefore, this
driver can be used instead of theu outdated out-of-tree driver from the
manufacturer.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20250924134115.2667650-1-fe@dev.tdt.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The receive error handling code is shared between RSCI and all other
SCIF port types, but the RSCI overrun_reg is specified as a memory
offset, while for other SCIF types it is an enum value used to index
into the sci_port_params->regs array, as mentioned above the
sci_serial_in() function.
For RSCI, the overrun_reg is CSR (0x48), causing the sci_getreg() call
inside the sci_handle_fifo_overrun() function to index outside the
bounds of the regs array, which currently has a size of 20, as specified
by SCI_NR_REGS.
Because of this, we end up accessing memory outside of RSCI's
rsci_port_params structure, which, when interpreted as a plat_sci_reg,
happens to have a non-zero size, causing the following WARN when
sci_serial_in() is called, as the accidental size does not match the
supported register sizes.
The existence of the overrun_reg needs to be checked because
SCIx_SH3_SCIF_REGTYPE has overrun_reg set to SCLSR, but SCLSR is not
present in the regs array.
Avoid calling sci_getreg() for port types which don't use standard
register handling.
Use the ops->read_reg() and ops->write_reg() functions to properly read
and write registers for RSCI, and change the type of the status variable
to accommodate the 32-bit CSR register.
sci_getreg() and sci_serial_in() are also called with overrun_reg in the
sci_mpxed_interrupt() interrupt handler, but that code path is not used
for RSCI, as it does not have a muxed interrupt.
------------[ cut here ]------------
Invalid register access
WARNING: CPU: 0 PID: 0 at drivers/tty/serial/sh-sci.c:522 sci_serial_in+0x38/0xac
Modules linked in: renesas_usbhs at24 rzt2h_adc industrialio_adc sha256 cfg80211 bluetooth ecdh_generic ecc rfkill fuse drm backlight ipv6
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.17.0-rc1+ #30 PREEMPT
Hardware name: Renesas RZ/T2H EVK Board based on r9a09g077m44 (DT)
pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : sci_serial_in+0x38/0xac
lr : sci_serial_in+0x38/0xac
sp : ffff800080003e80
x29: ffff800080003e80 x28: ffff800082195b80 x27: 000000000000000d
x26: ffff8000821956d0 x25: 0000000000000000 x24: ffff800082195b80
x23: ffff000180e0d800 x22: 0000000000000010 x21: 0000000000000000
x20: 0000000000000010 x19: ffff000180e72000 x18: 000000000000000a
x17: ffff8002bcee7000 x16: ffff800080000000 x15: 0720072007200720
x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720
x11: 0000000000000058 x10: 0000000000000018 x9 : ffff8000821a6a48
x8 : 0000000000057fa8 x7 : 0000000000000406 x6 : ffff8000821fea48
x5 : ffff00033ef88408 x4 : ffff8002bcee7000 x3 : ffff800082195b80
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff800082195b80
Call trace:
sci_serial_in+0x38/0xac (P)
sci_handle_fifo_overrun.isra.0+0x70/0x134
sci_er_interrupt+0x50/0x39c
__handle_irq_event_percpu+0x48/0x140
handle_irq_event+0x44/0xb0
handle_fasteoi_irq+0xf4/0x1a0
handle_irq_desc+0x34/0x58
generic_handle_domain_irq+0x1c/0x28
gic_handle_irq+0x4c/0x140
call_on_irq_stack+0x30/0x48
do_interrupt_handler+0x80/0x84
el1_interrupt+0x34/0x68
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x6c/0x70
default_idle_call+0x28/0x58 (P)
do_idle+0x1f8/0x250
cpu_startup_entry+0x34/0x3c
rest_init+0xd8/0xe0
console_on_rootfs+0x0/0x6c
__primary_switched+0x88/0x90
---[ end trace 0000000000000000 ]---
Cc: stable <stable@kernel.org>
Fixes: 0666e3fe95 ("serial: sh-sci: Add support for RZ/T2H SCI")
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Link: https://patch.msgid.link/20250923154707.1089900-1-cosmin-gabriel.tanislav.xa@renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The rtl_ecc_engine_ops structure is only used to provide a set of
callback functions and is never modified after initialization.
Mark it as const so it can be placed in the read-only section, which
improves safety and allows better compiler optimization.
Signed-off-by: Li Qiang <liqiang01@kylinos.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The "req.start" and "req.len" variables are u64 values that come from the
user at the start of the function. We mask away the high 32 bits of
"req.len" so that's capped at U32_MAX but the "req.start" variable can go
up to U64_MAX which means that the addition can still integer overflow.
Use check_add_overflow() to fix this bug.
Fixes: 095bb6e44e ("mtdchar: add MEMREAD ioctl")
Fixes: 6420ac0af9 ("mtdchar: prevent unbounded allocation in MEMWRITE ioctl")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
strbin signal delay under 0x8 configuration is not stable after massive
test. The recommandation of it should be 0x4.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Tested-by: Alexey Charkov <alchark@gmail.com>
Tested-by: Hugh Cole-Baker <sigmaris@gmail.com>
Fixes: 08f3dff799 ("mmc: sdhci-of-dwcmshc: add rockchip platform support")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Since pm_runtime_get_active() returns 0 on success, all of the
DEFINE_GUARD_COND() macros in pm_runtime.h need the "_RET == 0"
condition at the end of the argument list or they would not work
correctly.
Fixes: 9a0abc3945 ("PM: runtime: Add auto-cleanup macros for "resume and get" operations")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/linux-pm/202510191529.BCyjKlLQ-lkp@intel.com/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Farhan Ali <alifm@linux.ibm.com>
Link: https://patch.msgid.link/5943878.DvuYhMxLoT@rafael.j.wysocki
On a filesystem with parent pointers, xchk_nlinks_collect_dir walks both
the directory entries (data fork) and the parent pointers (attr fork) to
determine the correct link count. Unfortunately I forgot to update the
lock mode logic to handle the case of a directory whose attr fork is in
btree format and has not yet been loaded *and* whose data fork doesn't
need loading.
This leads to a bunch of assertions from xfs/286 in xfs_iread_extents
because we only took ILOCK_SHARED, not ILOCK_EXCL. You'd need the rare
happenstance of a directory with a large number of non-pptr extended
attributes set and enough memory pressure to cause the directory to be
evicted and partially reloaded from disk.
I /think/ this only started in 6.18-rc1 because I've started seeing OOM
errors with the maple tree slab using 70% of memory, and this didn't
happen in 6.17. Yay dynamic systems!
Cc: stable@vger.kernel.org # v6.10
Fixes: 77ede5f44b ("xfs: walk directory parent pointers to determine backref count")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Apparently we can never deprecate mount options in this project, because
it will invariably turn out that some foolish userspace depends on some
behavior and break. From Oleksandr Natalenko:
In v6.18, the attr2 XFS mount option is removed. This may silently
break system boot if the attr2 option is still present in /etc/fstab
for rootfs.
Consider Arch Linux that is being set up from scratch with / being
formatted as XFS. The genfstab command that is used to generate
/etc/fstab produces something like this by default:
/dev/sda2 on / type xfs (rw,relatime,attr2,discard,inode64,logbufs=8,logbsize=32k,noquota)
Once the system is set up and rebooted, there's no deprecation warning
seen in the kernel log:
# cat /proc/cmdline
root=UUID=77b42de2-397e-47ee-a1ef-4dfd430e47e9 rootflags=discard rd.luks.options=discard quiet
# dmesg | grep -i xfs
[ 2.409818] SGI XFS with ACLs, security attributes, realtime, scrub, repair, quota, no debug enabled
[ 2.415341] XFS (sda2): Mounting V5 Filesystem 77b42de2-397e-47ee-a1ef-4dfd430e47e9
[ 2.442546] XFS (sda2): Ending clean mount
Although as per the deprecation intention, it should be there.
Vlastimil (in Cc) suggests this is because xfs_fs_warn_deprecated()
doesn't produce any warning by design if the XFS FS is set to be
rootfs and gets remounted read-write during boot. This imposes two
problems:
1) a user doesn't see the deprecation warning; and
2) with v6.18 kernel, the read-write remount fails because of unknown
attr2 option rendering system unusable:
systemd[1]: Switching root.
systemd-remount-fs[225]: /usr/bin/mount for / exited with exit status 32.
# mount -o rw /
mount: /: fsconfig() failed: xfs: Unknown parameter 'attr2'.
Thorsten (in Cc) suggested reporting this as a user-visible regression.
From my PoV, although the deprecation is in place for 5 years already,
it may not be visible enough as the warning is not emitted for rootfs.
Considering the amount of systems set up with XFS on /, this may
impose a mass problem for users.
Vlastimil suggested making attr2 option a complete noop instead of
removing it.
IOWs, the initrd mounts the root fs with (I assume) no mount options,
and mount -a remounts with whatever options are in fstab. However,
XFS doesn't complain about deprecated mount options during a remount, so
technically speaking we were not warning all users in all combinations
that they were heading for a cliff.
Gotcha!!
Now, how did 'attr2' get slurped up on so many systems? The old code
would put that in /proc/mounts if the filesystem happened to be in attr2
mode, even if user hadn't mounted with any such option. IOWs, this is
because someone thought it would be a good idea to advertise system
state via /proc/mounts.
The easy way to fix this is to reintroduce the four mount options but
map them to a no-op option that ignores them, and hope that nobody's
depending on attr2 to appear in /proc/mounts. (Hint: use the fsgeometry
ioctl). But we've learned our lesson, so complain as LOUDLY as possible
about the deprecation.
Lessons learned:
1. Don't expose system state via /proc/mounts; the only strings that
ought to be there are options *explicitly* provided by the user.
2. Never tidy, it's not worth the stress and irritation.
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Cc: stable@vger.kernel.org # v6.18-rc1
Fixes: b9a176e541 ("xfs: remove deprecated mount options")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
The deprecation of the 'attr2' mount option in 6.18 wasn't entirely
successful because nobody noticed that the kernel never printed a
warning about attr2 being set in fstab if the only xfs filesystem is the
root fs; the initramfs mounts the root fs with no mount options; and the
init scripts only conveyed the fstab options by remounting the root fs.
Fix this by making it complain all the time.
Cc: stable@vger.kernel.org # v5.13
Fixes: 92cf7d3638 ("xfs: Skip repetitive warnings about mount options")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
xfs_daddr_t is a signed type, which means that xfs_buf_map_verify is
using a signed comparison. This causes problems if bt_nr_sectors is
never overridden (e.g. in the case of an xfbtree for rmap btree repairs)
because even daddr 0 can't pass the verifier test in that case.
Define an explicit max constant and set the initial bt_nr_sectors to a
positive value.
Found by xfs/422.
Cc: stable@vger.kernel.org # v6.18-rc1
Fixes: 42852fe57c ("xfs: track the number of blocks in each buftarg")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
When there is no port entry in the tcpci entry itself, the driver will
trigger an error message "OF: graph: no port node found in /...../typec" .
It is documented that the dts node should contain an connector entry
with ports and several port pointing to devices with usb-role-switch
property set. Only when those connector entry is missing, it should
check for port entries in the main node.
We switch the search order for looking after ports, which will avoid the
failure message while there are explicit connector entries.
Fixes: d56de8c9a1 ("usb: typec: tcpm: try to get role switch from tcpc fwnode")
Cc: stable <stable@kernel.org>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://patch.msgid.link/20251013-b4-ml-topic-tcpm-v2-1-63c9b2ab8a0b@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The list of Huawei LTE modules needing the quirk fixing spurious wakeups
was missing the IDs of the Huawei ME906S module, therefore suspend did not
work.
Cc: stable <stable@kernel.org>
Signed-off-by: Tim Guttzeit <t.guttzeit@tuxedocomputers.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://patch.msgid.link/20251020134304.35079-1-wse@tuxedocomputers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
