Current pte_mkwrite_novma() makes PTE dirty unconditionally. This may
mark some pages that are never written dirty wrongly. For example,
do_swap_page() may map the exclusive pages with writable and clean PTEs
if the VMA is writable and the page fault is for read access.
However, current pte_mkwrite_novma() implementation always dirties the
PTE. This may cause unnecessary disk writing if the pages are
never written before being reclaimed.
So, change pte_mkwrite_novma() to clear the PTE_RDONLY bit only if the
PTE_DIRTY bit is set to make it possible to make the PTE writable and
clean.
The current behavior was introduced in commit 73e86cb03c ("arm64:
Move PTE_RDONLY bit handling out of set_pte_at()"). Before that,
pte_mkwrite() only sets the PTE_WRITE bit, while set_pte_at() only
clears the PTE_RDONLY bit if both the PTE_WRITE and the PTE_DIRTY bits
are set.
To test the performance impact of the patch, on an arm64 server
machine, run 16 redis-server processes on socket 1 and 16
memtier_benchmark processes on socket 0 with mostly get
transactions (that is, redis-server will mostly read memory only).
The memory footprint of redis-server is larger than the available
memory, so swap out/in will be triggered. Test results show that the
patch can avoid most swapping out because the pages are mostly clean.
And the benchmark throughput improves ~23.9% in the test.
Fixes: 73e86cb03c ("arm64: Move PTE_RDONLY bit handling out of set_pte_at()")
Signed-off-by: Huang Ying <ying.huang@linux.alibaba.com>
Cc: Will Deacon <will@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Gavin Shan <gshan@redhat.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When ACPI_MISALIGNMENT_NOT_SUPPORTED is set, GCC can produce a bogus
-Wstringop-overread warning, see [1].
To me, it's very clear that we have a compiler bug here, thus just
disable the warning.
Fixes: a9d13433fe ("LoongArch: Align ACPI structures if ARCH_STRICT_ALIGN enabled")
Link: https://lore.kernel.org/all/899f2dec-e8b9-44f4-ab8d-001e160a2aed@roeck-us.net/
Link: abf5b573
Link: https://gcc.gnu.org/PR122073 [1]
Co-developed-by: Saket Dumbre <saket.dumbre@intel.com>
Signed-off-by: Saket Dumbre <saket.dumbre@intel.com>
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Cc: All applicable <stable@vger.kernel.org>
[ rjw: Subject and changelog edits ]
Link: https://patch.msgid.link/20251021092825.822007-1-xry111@xry111.site
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
of_genpd_add_provider_simple() could fail, in which case this code
leaks the domain name, pd->pd.name.
Use devm_kstrdup_const() to plug this leak. As a side-effect, we can
simplify existing error handling.
Fixes: c09a3e6c97 ("soc: samsung: pm_domains: Convert to regular platform driver")
Cc: stable@vger.kernel.org
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
schedule_dc_vmin_vmax() is called by dm_crtc_high_irq(). Hence, we
cannot have the former sleep. Use GFP_NOWAIT for allocation in this
function.
Fixes: c210b757b4 ("drm/amd/display: fix dmub access race condition")
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Sun peng (Leo) Li <sunpeng.li@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c04812cbe2)
Cc: stable@vger.kernel.org
[Why]
On a mst branch with multi display setup, dc context is obselete
after updating the first stream. Referencing the same dc context
for the next stream update to fetch dc pointer leads to NULL
pointer dereference.
[How]
Get the dc pointer from the link rather than context.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit dc69b48988)
Cc: stable@vger.kernel.org
If two competing threads enter alloc_slab_obj_exts() and one of them
fails to allocate the object extension vector, it might override the
valid slab->obj_exts allocated by the other thread with
OBJEXTS_ALLOC_FAIL. This will cause the thread that lost this race and
expects a valid pointer to dereference a NULL pointer later on.
Update slab->obj_exts atomically using cmpxchg() to avoid
slab->obj_exts overrides by racing threads.
Thanks for Vlastimil and Suren's help with debugging.
Fixes: f7381b9116 ("slab: mark slab->obj_exts allocation failures unconditionally")
Cc: <stable@vger.kernel.org>
Suggested-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Hao Ge <gehao@kylinos.cn>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Link: https://patch.msgid.link/20251021010353.1187193-1-hao.ge@linux.dev
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
In the old mount proceedure, hostfs could only pass root directory during
boot. This is because it constructed the root directory using the @root_ino
event without any mount options. However, when using it with the new mount
API, this step is no longer triggered. As a result, if users mounts without
specifying any mount options, the @host_root_path remains uninitialized. To
prevent this issue, the @host_root_path should be initialized at the time
of allocation.
Reported-by: Geoffrey Thorpe <geoff@geoffthorpe.net>
Closes: https://lore.kernel.org/all/643333a0-f434-42fb-82ac-d25a0b56f3b7@geoffthorpe.net/
Fixes: cd140ce9f6 ("hostfs: convert hostfs to use the new mount API")
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://patch.msgid.link/20251011092235.29880-1-lihongbo22@huawei.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
In statmount_string(), most flags assign an output offset pointer (offp)
which is later updated with the string offset. However, the
STATMOUNT_MNT_UIDMAP and STATMOUNT_MNT_GIDMAP cases directly set the
struct fields instead of using offp. This leaves offp uninitialized,
leading to a possible uninitialized dereference when *offp is updated.
Fix it by assigning offp for UIDMAP and GIDMAP as well, keeping the code
path consistent.
Fixes: 37c4a9590e ("statmount: allow to retrieve idmappings")
Fixes: e52e97f09f ("statmount: let unset strings be empty")
Cc: stable@vger.kernel.org
Signed-off-by: Zhen Ni <zhen.ni@easystack.cn>
Link: https://patch.msgid.link/20251013114151.664341-1-zhen.ni@easystack.cn
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Merge series from Vitaly Rodionov <vitalyr@opensource.cirrus.com>:
This patch series introduces DAC, CODEC, and SPI control bus support
for Cirrus Logic CS530x variants, along with general code cleanup
and resolution of checkpatch.pl warnings.
Changes since v1,v2,v3:
- Signed off all patches
- Splitted "tidy up" pach in 3 separate simple patches
- Fixed commit subject to much preferred subject prefix for binding patches.
- Moved dt-bindings related patch down the chain
- Added all relevant maintainers to CC list
Simon Trimmer (4):
ASoC: cs530x: Correct log message with expected variable
ASoC: cs530x: Add CODEC and DAC support
ASoC: cs530x: Check the DEVID matches the devtype
ASoC: cs530x: Rename i2c related structures
Vitaly Rodionov (7):
ASoC: cs530x: Update the copyright headers
ASoC: cs530x: Sort #include directives and tidy up whitespaces
ASoC: cs530x: Remove unused struct members and constants
ASoC: cs530x: Correct constant naming
ASoC: dt-bindings: sound: cirrus: cs530x: Add cs530x variants
ASoC: cs530x: Correct MCLK reference frequency values
ASoC: cs530x: Add SPI bus support for cs530x parts
.../bindings/sound/cirrus,cs530x.yaml | 4 +
sound/soc/codecs/Kconfig | 10 +
sound/soc/codecs/Makefile | 2 +
sound/soc/codecs/cs530x-i2c.c | 24 +-
sound/soc/codecs/cs530x-spi.c | 92 ++++
sound/soc/codecs/cs530x.c | 516 +++++++++++++++---
sound/soc/codecs/cs530x.h | 120 ++--
7 files changed, 634 insertions(+), 134 deletions(-)
create mode 100644 sound/soc/codecs/cs530x-spi.c
--
2.43.0
Enabling compile testing should not enable every individual driver (we
have "allyesconfig" for that).
Fixes: 7cd8db0fb0 ("mmc: add COMPILE_TEST to multiple drivers")
Cc: Mikko Rapeli <mikko.rapeli@linaro.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
When retbleed mitigation is disabled, the kernel already prints an info
message that the system is vulnerable. Recent code restructuring also
inadvertently led to RETBLEED_INTEL_MSG being printed as an error, which is
unnecessary as retbleed mitigation was already explicitly disabled (by config
option, cmdline, etc.).
Qualify this print statement so the warning is not printed unless an actual
retbleed mitigation was selected and is being disabled due to incompatibility
with spectre_v2.
Fixes: e3b78a7ad5 ("x86/bugs: Restructure retbleed mitigation")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220624
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20251003171936.155391-1-david.kaplan@amd.com
Resolve race conditions in timestamp events list handling between TX
and RX paths causing missed timestamps.
The current implementation uses a single events list for both TX and RX
timestamps. The am65_cpts_find_ts() function acquires the lock,
splices all events (TX as well as RX events) to a temporary list,
and releases the lock. This function performs matching of timestamps
for TX packets only. Before it acquires the lock again to put the
non-TX events back to the main events list, a concurrent RX
processing thread could acquire the lock (as observed in practice),
find an empty events list, and fail to attach timestamp to it,
even though a relevant event exists in the spliced list which is yet to
be restored to the main list.
Fix this by creating separate events lists to handle TX and RX
timestamps independently.
Fixes: c459f606f6 ("net: ethernet: ti: am65-cpts: Enable RX HW timestamp for PTP packets using CPTS FIFO")
Signed-off-by: Aksh Garg <a-garg7@ti.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://patch.msgid.link/20251016115755.1123646-1-a-garg7@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Attempting to load the pci-idio-16 module fails during regmap
initialization with a return error -EINVAL. This is a result of the
regmap cache failing initialization. Set the idio_16_regmap_config
max_register member to fix this failure.
Fixes: 73d8f3efc5 ("gpio: pci-idio-16: Migrate to the regmap API")
Reported-by: Mark Cave-Ayland <mark.caveayland@nutanix.com>
Closes: https://lore.kernel.org/r/9b0375fd-235f-4ee1-a7fa-daca296ef6bf@nutanix.com
Suggested-by: Mark Cave-Ayland <mark.caveayland@nutanix.com>
Cc: stable@vger.kernel.org
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251020-fix-gpio-idio-16-regmap-v2-2-ebeb50e93c33@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Attempting to load the 104-idio-16 module fails during regmap
initialization with a return error -EINVAL. This is a result of the
regmap cache failing initialization. Set the idio_16_regmap_config
max_register member to fix this failure.
Fixes: 2c210c9a34 ("gpio: 104-idio-16: Migrate to the regmap API")
Reported-by: Mark Cave-Ayland <mark.caveayland@nutanix.com>
Closes: https://lore.kernel.org/r/9b0375fd-235f-4ee1-a7fa-daca296ef6bf@nutanix.com
Suggested-by: Mark Cave-Ayland <mark.caveayland@nutanix.com>
Cc: stable@vger.kernel.org
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251020-fix-gpio-idio-16-regmap-v2-1-ebeb50e93c33@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
With enough debug options enabled, struct xfs_mount is larger
than 4k and thus NOFAIL allocations won't work for it.
xfs_init_fs_context is early in the mount process, and if we really
are out of memory there we'd better give up ASAP anyway.
Fixes: 7b77b46a61 ("xfs: use kmem functions for struct xfs_mount")
Reported-by: syzbot+359a67b608de1ef72f65@syzkaller.appspotmail.com
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
The MRU cache for open zones is unfortunately still not ideal, as it can
time out pretty easily when doing heavy I/O to hard disks using up most
or all open zones. One option would be to just increase the timeout,
but while looking into that I realized we're just better off caching it
indefinitely as there is no real downside to that once we don't hold a
reference to the cache open zone.
So switch the open zone to RCU freeing, and then stash the last used
open zone into inode->i_private. This helps to significantly reduce
fragmentation by keeping I/O localized to zones for workloads that
write using many open files to HDD.
Fixes: 4e4d520755 ("xfs: add the zoned space allocator")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
When GCD has no new work to handle, but read, write or reset commands
are outstanding, it currently busy loops, which is a bit suboptimal,
and can lead to softlockup warnings in case of stuck commands.
Change the code so that the task state is only set to running when work
is performed, which looks a bit tricky due to the design of the
reading/writing/resetting lists that contain both in-flight and finished
commands.
Fixes: 080d01c41d ("xfs: implement zoned garbage collection")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
When using page list framebuffer, and using RGB888 format, some
pixels can cross the page boundaries, and this case was not handled,
leading to writing 1 or 2 bytes on the next virtual address.
Add a check and a specific function to handle this case.
Fixes: c9ff280879 ("drm/panic: Add support to scanout buffer as array of pages")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20251009122955.562888-7-jfalempe@redhat.com
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
In the unlikely case that the screen is tiny, and smaller than the
font width, it leads to a divide by 0:
draw_line_with_wrap()
chars_per_row = sb->width / font->width = 0
line_wrap.len = line->len % chars_per_row;
This will trigger a divide by 0
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20251009122955.562888-6-jfalempe@redhat.com
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Depending on qr_code size and screen size, the vertical margin can
be negative, that means there is not enough room to draw the qr_code.
So abort early, to avoid a segfault by trying to draw at negative
coordinates.
Fixes: cb5164ac43 ("drm/panic: Add a QR code panic screen")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20251009122955.562888-4-jfalempe@redhat.com
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
The borders of the qr code was not taken into account to check if it
overlap with the logo, leading to the logo being partially covered.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20251009122955.562888-3-jfalempe@redhat.com
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
If the logo width is bigger than the framebuffer width, and the
height is big enough to hold the logo and the message, it will draw
at x coordinate that are higher than the width, and ends up in a
corrupted image.
Fixes: 4b570ac2eb ("drm/rect: Add drm_rect_overlap()")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20251009122955.562888-2-jfalempe@redhat.com
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
The current hlist_empty checks only test the first bucket of each
hashtable, ignoring any other bucket. They should be caught by the
WARN_ON for state_all, but better to make all the checks accurate.
Fixes: 73d189dce4 ("netns xfrm: per-netns xfrm_state_bydst hash")
Fixes: d320bbb306 ("netns xfrm: per-netns xfrm_state_bysrc hash")
Fixes: b754a4fd8f ("netns xfrm: per-netns xfrm_state_byspi hash")
Fixes: fe9f1d8779 ("xfrm: add state hashtable keyed by seq")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
xfrm_state_construct can fail without setting an error if the
requested pcpu_num value is too big. Set err and add an extack message
to avoid confusing userspace.
Fixes: 1ddf9916ac ("xfrm: Add support for per cpu xfrm state handling.")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
In case xfrm_state_migrate fails after calling xfrm_dev_state_add, we
directly release the last reference and destroy the new state, without
calling xfrm_dev_state_delete (this only happens in
__xfrm_state_delete, which we're not calling on this path, since the
state was never added).
Call xfrm_dev_state_delete on error when an offload configuration was
provided.
Fixes: ab244a394c ("xfrm: Migrate offload configuration")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
xfrm_state_migrate/xfrm_state_clone_and_setup create a new state, and
call xfrm_state_put to destroy it in case of
failure. __xfrm_state_destroy expects the state to be in
XFRM_STATE_DEAD, but we currently don't do that.
Reported-by: syzbot+5cd6299ede4d4f70987b@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=5cd6299ede4d4f70987b
Fixes: 78347c8c6b ("xfrm: Fix xfrm_state_migrate leak")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
In commit b441cf3f8c ("xfrm: delete x->tunnel as we delete x"), I
missed the case where state creation fails between full
initialization (->init_state has been called) and being inserted on
the lists.
In this situation, ->init_state has been called, so for IPcomp
tunnels, the fallback tunnel has been created and added onto the
lists, but the user state never gets added, because we fail before
that. The user state doesn't go through __xfrm_state_delete, so we
don't call xfrm_state_delete_tunnel for those states, and we end up
leaking the FB tunnel.
There are several codepaths affected by this: the add/update paths, in
both net/key and xfrm, and the migrate code (xfrm_migrate,
xfrm_state_migrate). A "proper" rollback of the init_state work would
probably be doable in the add/update code, but for migrate it gets
more complicated as multiple states may be involved.
At some point, the new (not-inserted) state will be destroyed, so call
xfrm_state_delete_tunnel during xfrm_state_gc_destroy. Most states
will have their fallback tunnel cleaned up during __xfrm_state_delete,
which solves the issue that b441cf3f8c (and other patches before it)
aimed at. All states (including FB tunnels) will be removed from the
lists once xfrm_state_fini has called flush_work(&xfrm_state_gc_work).
Reported-by: syzbot+999eb23467f83f9bf9bf@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=999eb23467f83f9bf9bf
Fixes: b441cf3f8c ("xfrm: delete x->tunnel as we delete x")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
We're not updating x1, but we still need to put() it.
Fixes: a4a87fa4e9 ("xfrm: Add Direction to the SA in or out")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Currently, XFS_ONLINE_SCRUB_STATS selects DEBUG_FS. However, DEBUG_FS
is meant for debugging, and people may want to disable it on production
systems. Since commit 0ff51a1fd7 ("xfs: enable online fsck by
default in Kconfig")), XFS_ONLINE_SCRUB_STATS is enabled by default,
forcing DEBUG_FS enabled too.
Fix this by replacing the selection of DEBUG_FS by a dependency on
DEBUG_FS, which is what most other options controlling the gathering and
exposing of statistics do.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
When using a zoned realtime device, tightly packing of data blocks
belonging to multiple closed files into the same realtime group (RTG)
is very efficient at improving write performance. This is especially
true with SMR HDDs as this can reduce, and even suppress, disk head
seeks.
However, such tight packing does not make sense for large files that
require at least a full RTG. If tight packing placement is applied for
such files, the VM writeback thread switching between inodes result in
the large files to be fragmented, thus increasing the garbage collection
penalty later when the RTG needs to be reclaimed.
This problem can be avoided with a simple heuristic: if the size of the
inode being written back is at least equal to the RTG size, do not use
tight-packing. Modify xfs_zoned_pack_tight() to always return false in
this case.
With this change, a multi-writer workload writing files of 256 MB on a
file system backed by an SMR HDD with 256 MB zone size as a realtime
device sees all files occupying exactly one RTG (i.e. one device zone),
thus completely removing the heavy fragmentation observed without this
change.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Improve the description of the XFS_RT configuration option to document
that this option is required for zoned block devices.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
XDP programs can change the layout of an xdp_buff through
bpf_xdp_adjust_tail() and bpf_xdp_adjust_head(). Therefore, the driver
cannot assume the size of the linear data area nor fragments. Fix the
bug in mlx5 by generating skb according to xdp_buff after XDP programs
run.
Currently, when handling multi-buf XDP, the mlx5 driver assumes the
layout of an xdp_buff to be unchanged. That is, the linear data area
continues to be empty and fragments remain the same. This may cause
the driver to generate erroneous skb or triggering a kernel
warning. When an XDP program added linear data through
bpf_xdp_adjust_head(), the linear data will be ignored as
mlx5e_build_linear_skb() builds an skb without linear data and then
pull data from fragments to fill the linear data area. When an XDP
program has shrunk the non-linear data through bpf_xdp_adjust_tail(),
the delta passed to __pskb_pull_tail() may exceed the actual nonlinear
data size and trigger the BUG_ON in it.
To fix the issue, first record the original number of fragments. If the
number of fragments changes after the XDP program runs, rewind the end
fragment pointer by the difference and recalculate the truesize. Then,
build the skb with the linear data area matching the xdp_buff. Finally,
only pull data in if there is non-linear data and fill the linear part
up to 256 bytes.
Fixes: f52ac7028b ("net/mlx5e: RX, Add XDP multi-buffer support in Striding RQ")
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1760644540-899148-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
XDP programs can release xdp_buff fragments when calling
bpf_xdp_adjust_tail(). The driver currently assumes the number of
fragments to be unchanged and may generate skb with wrong truesize or
containing invalid frags. Fix the bug by generating skb according to
xdp_buff after the XDP program runs.
Fixes: ea5d49bdae ("net/mlx5e: Add XDP multi buffer support to the non-linear legacy RQ")
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1760644540-899148-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The madvise implementation currently resets the SVM madvise if the
underlying CPU map is unmapped. This is in an attempt to mimic the
CPU madvise behaviour. However, it's not clear that this is a desired
behaviour since if the end app user relies on it for malloc()ed
objects or stack objects, it may not work as intended.
Instead of having the autoreset functionality being a direct
application-facing implicit UAPI, make the UMD explicitly choose
this behaviour if it wants to expose it by introducing
DRM_XE_VM_BIND_FLAG_MADVISE_AUTORESET, and add a semantics
description.
v2:
- Kerneldoc fixes. Fix a commit log message.
Fixes: a2eb8aec3e ("drm/xe: Reset VMA attributes to default in SVM garbage collector")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: "Falkowski, John" <john.falkowski@intel.com>
Cc: "Mrozek, Michal" <michal.mrozek@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://lore.kernel.org/r/20251015170726.178685-2-thomas.hellstrom@linux.intel.com
(cherry picked from commit 59a2d3f38a)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
When splitting and restoring vmas for madvise, we only copied the
XE_VMA_SYSTEM_ALLOCATOR flag. That meant we lost flags for read_only,
dumpable and sparse (in case anyone would call madvise for the latter).
Instead, define a mask of relevant flags and ensure all are replicated,
To simplify this and make the code a bit less fragile, remove the
conversion to VMA_CREATE flags and instead just pass around the
gpuva flags after initial conversion from user-space.
Fixes: a2eb8aec3e ("drm/xe: Reset VMA attributes to default in SVM garbage collector")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20251015170726.178685-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit b3af8658ec)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
sctp_vrf.sh could fail:
TEST 12: bind vrf-2 & 1 in server, connect from client 1 & 2, N [FAIL]
not ok 1 selftests: net: sctp_vrf.sh # exit=3
The failure happens when the server bind in a new run conflicts with an
existing association from the previous run:
[1] ip netns exec $SERVER_NS ./sctp_hello server ...
[2] ip netns exec $CLIENT_NS ./sctp_hello client ...
[3] ip netns exec $SERVER_NS pkill sctp_hello ...
[4] ip netns exec $SERVER_NS ./sctp_hello server ...
It occurs if the client in [2] sends a message and closes immediately.
With the message unacked, no SHUTDOWN is sent. Killing the server in [3]
triggers a SHUTDOWN the client also ignores due to the unacked message,
leaving the old association alive. This causes the bind at [4] to fail
until the message is acked and the client responds to a second SHUTDOWN
after the server’s T2 timer expires (3s).
This patch fixes the issue by preventing the client from sending data.
Instead, the client blocks on recv() and waits for the server to close.
It also waits until both the server and the client sockets are fully
released in stop_server and wait_client before restarting.
Additionally, replace 2>&1 >/dev/null with -q in sysctl and grep, and
drop other redundant 2>&1 >/dev/null redirections, and fix a typo from
N to Y (connect successfully) in the description of the last test.
Fixes: a61bd7b9fe ("selftests: add a selftest for sctp vrf")
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Tested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/be2dacf52d0917c4ba5e2e8c5a9cb640740ad2b6.1760731574.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ioctl returns 0 upon success, so !0 returning -1 breaks the selftest.
Drop the '!' to fix it.
Fixes: 1d235d8494 ("iommu/selftest: prevent use of uninitialized variable")
Link: https://patch.msgid.link/r/20251014214847.1113759-1-nicolinc@nvidia.com
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add missing smb3_rw_credits tracepoints to cifs_readv_callback() (for SMB1)
to match those of SMB2/3.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Paulo Alcantara <pc@manguebit.org>
cc: Shyam Prasad N <sprasad@microsoft.com>
cc: Tom Talpey <tom@talpey.com>
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Switch to a personal email account as I'll be leaving Red Hat soon.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20251013152613.3088777-1-alex.williamson@redhat.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
A refactoring bug introduced an argument order mistake in the call to
acpi_fwnode_get_reference_args() from __acpi_node_get_property_reference().
This caused incorrect behavior when resolving ACPI property references.
Fix the issue by correcting the argument order.
Fixes: e121be784d ("ACPI: property: Refactor acpi_fwnode_get_reference_args() to support nargs_prop")
Reported-by: Thomas Richard <thomas.richard@bootlin.com>
Closes: https://lore.kernel.org/all/1241f2b6-9b4e-4623-8a83-77db8774ac32@bootlin.com/
Tested-by: Thomas Richard <thomas.richard@bootlin.com>
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251017100744.71871-1-sunilvl@ventanamicro.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmj1/XkACgkQnJ2qBz9k
QNmLiwgA73qlzETE1SvskqqX6JDRVezmRlfmJhGwoQhJARwJpn5Nim1QaSo2dQg8
XkVu58p8/aNKlwsN/2pZDu9uBw2njsiq9Q9cxh/6LJzifJdHQhe0LKHMOxVZfRnO
NeCjRAQKOAGubg15hvRqeTZXvxPGplWnyhf5gM7OtluaUiUS1Fie7NKq5jMA4c6u
g2xsCqYaAmC4tkOfAjGyZggY+F8XlvOmknHYq3cAoyHQc1WXVjCnyxW+7DufyWh7
QL2LnfdtHJ1ELPDzoQhKcpdDT42Ebnl3Fs7UfXGqH2D6jr03LxiLYL4C3LxiuX9n
bBmu4I3O6Id4L/e3wEN5n04pZKPR4w==
=OPPy
-----END PGP SIGNATURE-----
Merge tag 'fsnotify_for_v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify fixes from Jan Kara:
- Stop-gap solution for a race between unmount of a filesystem with
fsnotify marks and someone inspecting fdinfo of fsnotify group with
those marks in procfs.
A proper solution is in the works but it will get a while to settle.
- Fix for non-decodable file handles (used by unprivileged apps using
fanotify)
* tag 'fsnotify_for_v6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fs/notify: call exportfs_encode_fid with s_umount
expfs: Fix exportfs_can_encode_fh() for EXPORT_FH_FID
It is reported that commit 85975daeaa ("cpuidle: menu: Avoid discarding
useful information") led to a performance regression on Intel Jasper Lake
systems because it reduced the time spent by CPUs in idle state C7 which
is correlated to the maximum frequency the CPUs can get to because of an
average running power limit [1].
Before that commit, get_typical_interval() would have returned UINT_MAX
whenever it had been unable to make a high-confidence prediction which
had led to selecting the deepest available idle state too often and
both power and performance had been inadequate as a result of that on
some systems. However, this had not been a problem on systems with
relatively aggressive average running power limits, like the Jasper Lake
systems in question, because on those systems it was compensated by the
ability to run CPUs faster.
It was addressed by causing get_typical_interval() to return a number
based on the recent idle duration information available to it even if it
could not make a high-confidence prediction, but that clearly did not
take the possible correlation between idle power and available CPU
capacity into account.
For this reason, revert most of the changes made by commit 85975daeaa,
except for one cosmetic cleanup, and add a comment explaining the
rationale for returning UINT_MAX from get_typical_interval() when it
is unable to make a high-confidence prediction.
Fixes: 85975daeaa ("cpuidle: menu: Avoid discarding useful information")
Closes: https://lore.kernel.org/linux-pm/36iykr223vmcfsoysexug6s274nq2oimcu55ybn6ww4il3g3cv@cohflgdbpnq7/ [1]
Reported-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3663603.iIbC2pHGDl@rafael.j.wysocki
