Commit graph

1,403,262 commits

Author SHA1 Message Date
Jonathan Cameron
305f655d05 iio: accel: kx022a: Factor out guts of write_raw() to allow direct returns
Create a new utility function for the actions taken when direct mode
is held. This allows for direct returns, simplifying the code flow.

Cc: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250217140135.896574-5-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-03-04 13:17:48 +00:00
Jonathan Cameron
9ab72adb90 iio: accel: mma8452: Switch to sparse friendly iio_device_claim/release_direct()
These new functions allow sparse to find failures to release
direct mode reducing chances of bugs over the claim_direct_mode()
functions that are deprecated.

Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250217140135.896574-4-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-03-04 13:17:48 +00:00
Jonathan Cameron
cce9172f3d iio: accel: mma8452: Factor out guts of write_raw() to simplify locking
Factoring out those parts of write_raw() in which direct mode is held
allows for direct returns on errors, simplifying the code.

Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250217140135.896574-3-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-03-04 13:17:48 +00:00
Jonathan Cameron
df330c8081 iio: accel: mma8452: Ensure error return on failure to matching oversampling ratio
If a match was not found, then the write_raw() callback would return
the odr index, not an error. Return -EINVAL if this occurs.
To avoid similar issues in future, introduce j, a new indexing variable
rather than using ret for this purpose.

Fixes: 79de2ee469 ("iio: accel: mma8452: claim direct mode during write raw")
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250217140135.896574-2-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-03-04 13:17:48 +00:00
Robert Budai
aaa9d61634 docs: iio: add documentation for adis16550 driver
Add documentation for adis16550 driver which describes the driver device
files and shows how the user may use the ABI for various scenarios
(configuration, measurement, etc.).

Co-developed-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Co-developed-by: Ramona Gradinariu <ramona.gradinariu@analog.com>
Signed-off-by: Ramona Gradinariu <ramona.gradinariu@analog.com>
Signed-off-by: Robert Budai <robert.budai@analog.com>
Link: https://patch.msgid.link/20250217105753.605465-7-robert.budai@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-03-04 13:17:47 +00:00
Robert Budai
bac4368fab iio: imu: adis16550: add adis16550 support
The ADIS16550 is a complete inertial system that includes a triaxis
gyroscope and a triaxis accelerometer. Each inertial sensor in the
ADIS16550 combines industry leading MEMS only technology with signal
conditioning that optimizes dynamic performance. The factory calibration
characterizes each sensor for sensitivity, bias, and alignment. As a
result, each sensor has its own dynamic compensation formulas that
provide accurate sensor measurements.

Co-developed-by: Ramona Gradinariu <ramona.gradinariu@analog.com>
Signed-off-by: Ramona Gradinariu <ramona.gradinariu@analog.com>
Co-developed-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Co-developed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Robert Budai <robert.budai@analog.com>
Link: https://patch.msgid.link/20250217105753.605465-6-robert.budai@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-03-04 13:17:24 +00:00
Johannes Berg
799b7f93c0 wifi: iwlwifi: remove mld/roc.c
This file should never have been part of the commit, remove it.

Fixes: af3be90884 ("wifi: iwlwifi: support ROC version 6")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-03-04 13:48:30 +01:00
Paolo Abeni
188fa9b9e2 Merge branch 'support-some-enhances-features-for-the-hibmcge-driver'
Jijie Shao says:

====================
Support some enhances features for the HIBMCGE driver

In this patch set, we mainly implement some enhanced features.
It mainly includes the statistics, diagnosis, and ioctl to
improve fault locating efficiency,
abnormal irq and MAC link exception handling feature
to enhance driver robustness,
and rx checksum offload feature to improve performance
(tx checksum feature has been implemented).

v3: https://lore.kernel.org/all/20250221115526.1082660-2-shaojijie@huawei.com/
v2: https://lore.kernel.org/all/20250218085829.3172126-1-shaojijie@huawei.com/
v1: https://lore.kernel.org/all/20250213035529.2402283-1-shaojijie@huawei.com/
====================

Link: https://patch.msgid.link/20250228115411.1750803-1-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04 13:45:36 +01:00
Jijie Shao
615552c601 net: hibmcge: Add support for ioctl
This patch implements the .ndo_eth_ioctl() to
read and write the PHY register.

Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04 13:45:33 +01:00
Jijie Shao
7a5d60dcf9 net: hibmcge: Add support for BMC diagnose feature
The MAC hardware is on the BMC side, and the driver is on the host side.
When the driver is abnormal, the BMC cannot directly detect the
exception cause.
Therefore, this patch implements the BMC diagnosis feature.

When users query driver diagnosis information on the BMC, the driver
detects the query request in the scheduled task and reports
driver statistics and link status to the BMC through the bar space.
The BMC collects logs to analyze exception causes.

Currently, the scheduled task is executed every 30 seconds
To quickly respond to user query requests,
this patch changes the scheduled task to once every second.

Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04 13:45:33 +01:00
Jijie Shao
e0306637e8 net: hibmcge: Add support for mac link exception handling feature
If the rate changed frequently, the PHY link ok,
but the MAC link maybe fails.
As a result, the network port is unavailable.

According to the documents of the chip,
core_reset needs to do to fix the fault.

In hw_adjus_link(), the core_reset is added to try to
ensure that MAC link status is normal.
In addition, MAC link failure detection is added.
If the MAC link fails after core_reset, driver invokes
the phy_stop() and phy_start() to re-link.

Due to phydev->lock, re-link cannot be triggered
in adjust_link(). Therefore, this operation
is invoked in a scheduled task.

Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04 13:45:33 +01:00
Jijie Shao
fd394a334b net: hibmcge: Add support for abnormal irq handling feature
the hardware error was reported by interrupt,
and need be fixed by doing function reset,
but the whole reset flow takes a long time,
should not do it in irq handler,
so do it in scheduled task.

Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04 13:45:33 +01:00
Jijie Shao
833b65a3b5 net: hibmcge: Add support for checksum offload
This patch implements the rx checksum offload feature.

The tx checksum offload processing in .ndo_start_xmit()
has been accepted. This patch also adds the tx checksum
feature, including NETIF_F_IP_CSUM and NETIF_F_IPV6_CSUM

Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04 13:45:33 +01:00
Jijie Shao
c0bf9bf31e net: hibmcge: Add support for dump statistics
The driver supports many hw statistics. This patch supports
dump statistics through ethtool_ops and ndo.get_stats64().

The type of hw statistics register is u32,
To prevent the statistics register from overflowing,
the driver dump the statistics every 30 seconds.
in a scheduled task.

Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04 13:45:33 +01:00
Tomi Valkeinen
8bab784bbd media: rcar-csi2: Convert to .{enable|disable}_streams
Drop the legacy .s_stream and convert to .{enable|disable}_streams.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-03-04 13:35:33 +01:00
Tomi Valkeinen
6fd944db28 media: rcar-isp: Convert to .{enable|disable}_streams
Drop the legacy .s_stream and convert to .{enable|disable}_streams.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-03-04 13:35:33 +01:00
Tomi Valkeinen
2e4c60baa0 media: rcar-isp: Convert to subdev state
Convert to subdev state. This allows us to drop the internal mutex and
risp_get_pad_format(), and add streams support in the future.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-03-04 13:35:33 +01:00
Tomi Valkeinen
12a1ac9c97 media: rcar-csi2: Use v4l2_subdev_{enable|disable}_streams()
Use v4l2_subdev_{enable|disable}_streams() instead of calling s_stream
op directly. This allows the called subdev to drop the legacy s_stream
op.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-03-04 13:35:33 +01:00
Tomi Valkeinen
f562fc5f48 media: rcar-isp: Use v4l2_subdev_{enable|disable}_streams()
Use v4l2_subdev_{enable|disable}_streams() instead of calling s_stream
op directly. This allows the called subdev to drop the legacy s_stream
op.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-03-04 13:35:33 +01:00
Tomi Valkeinen
178c1be584 media: rcar-vin: Use v4l2_subdev_{enable|disable}_streams()
Use v4l2_subdev_{enable|disable}_streams() instead of calling s_stream
op directly. This allows the called subdev to drop the legacy s_stream
op.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-03-04 13:35:33 +01:00
Tomi Valkeinen
e62a3254d5 media: rcar-csi2: Use v4l2_get_link_freq()
Instead of directly using V4L2_CID_PIXEL_RATE and calculating the mbps
from that, use v4l2_get_link_freq(), which also supports
V4L2_CID_LINK_FREQ.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-03-04 13:35:33 +01:00
Tomi Valkeinen
733c985036 media: rcar-isp: Add RAW8, RAW10 and RAW12 formats
Add RAW8, RAW10 and RAW12 formats.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-03-04 13:35:33 +01:00
Tomi Valkeinen
a383cb7afc media: rcar-csi2: Add RAW10 and RAW12 formats
Add RAW10 and RAW12 formats. We only need to add the entries to the
rcar_csi2_format list.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-03-04 13:35:33 +01:00
Tomi Valkeinen
cc2022cbb9 media: rcar-csi2: Move Y8 entry to a better place
Move the Y8 entry before Y10, so that the entries are in a bit more
logical order.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-03-04 13:35:33 +01:00
Hans de Goede
f2006362aa media: ov08x40: Log chip ID when identifying the chip
Debug log the chip ID after successfully identifying the chip, this is
useful to see if the identification is done on probe() time or if it is
delayed till the first stream on.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-03-04 13:35:33 +01:00
Hans de Goede
8d54715441 media: ov08x40: Fix value of reset GPIO when requesting it
We should put/leave the sensor in reset when requesting the GPIO, after
requesting it there are 2 possible scenarios and having the GPIO driven
low is no good in either scenario:

1. The sensor was in ACPI D0 before probe() runs, in this case
   ov08x40_power_on() + ov08x40_identify_module() will run immediately
   after requesting the GPIO and ov08x40_power_on() starts with driving
   the GPIO high. So if the GPIO was already high it will very shortly
   be driven low, more of a spike to low then actually properly be driven
   low. Which may leave the sensor in a confused state.

   If we request the GPIO to be high at request time then power_on() will
   driver it high again (no-op) and then sleep for 1-2 ms, so no spike.

2. The sensor was in ACPI D3 / off before probe(), in this case probe()
   leaves the sensor alone. But when the sensor is off its reset line
   should be driven high not low.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-03-04 13:35:32 +01:00
Paul Elder
c0aa40f45f media: imx335: Set vblank immediately
When the vblank v4l2 control is set, it does not get written to the
hardware unless exposure is also changed. Change the behavior such that
the vblank is written immediately when the control is set, as setting
the vblank without changing the exposure is a valid use case (such as
for changing the frame rate).

Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-03-04 13:35:32 +01:00
Sakari Ailus
d89ad44197 media: ipu6: Drop unused ipu6_dma_get_sgtable()
ipu6_dma_get_sgtable() is now unused. Drop it.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-03-04 13:35:32 +01:00
Richard Leitner
109bc8fb23 media: i2c: ov9282: add AEC Manual register definition
Add #define's for the "AEC MANUAL" (0x3503) register and its
values/flags. Use those in the registers single usage within the
`common_regs` struct.

All values are based on the OV9281 datasheet v1.01 (09.18.2015).

Signed-off-by: Richard Leitner <richard.leitner@linux.dev>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-03-04 13:35:32 +01:00
Richard Leitner
1e022996ef media: i2c: ov9282: use register definitions
For better readability use already available register definitions in
hard-coded common and mode register structs.

Signed-off-by: Richard Leitner <richard.leitner@linux.dev>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-03-04 13:35:32 +01:00
Qasim Ijaz
ab936836ec media: vgxy61: Replace nested min() with single min3()
Use min3() macro instead of nesting min() to simplify the return
statement.

Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-03-04 13:35:32 +01:00
Jai Luthra
5de9a5165f media: i2c: imx219: Only use higher LLP_MIN for binned resolutions
The LLP_MIN of 3560 is only needed to fix artefacts seen with binned
resolutions. As increasing the LLP reduces the highest possible
framerate by ~3%, use the old default minimum of 3448 if we are not
doing 2x2 analog binning.

Also restore the fll_def value for non-binned modes in the modes
definition to restore the default mode framerate to 30fps.

Suggested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/linux-media/CAPY8ntC1-S6zKtDvmc6EgyxP+j6rTShuG8Dr8PKb9XQr2PeS_w@mail.gmail.com/
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-03-04 13:35:32 +01:00
Jai Luthra
07444c60ff media: i2c: imx219: Use subdev state to calculate binning and pixelrate
The pixel rate and binning calculations need the format and resolution
of the sensor, so pass the v4l2 subdev state directly instead of always
operating on the active state.

Suggested-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Link: https://lore.kernel.org/linux-media/sejl7xskif6rlpdsg3jhczjwe5gi6rs53ehbyka6omv2zeg7qq@4iis7i2lla5p/
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-03-04 13:35:32 +01:00
Jai Luthra
5345c743ba media: i2c: imx219: Simplify binning mode
The imx219_get_binning() function currently returns two separate pieces
of information, the return value is the binning mode enum, and the bin_h
and bin_v references are updated with whether to perform binning in
horizontal and vertical dimensions.

It is simpler to combine both of these pieces of information, and
directly update the bin_h and bin_v references with the register value
that we will write to the sensor, which includes if the binning is
digital or analog mode, thus allowing us to remove the superfluous
binning mode enum.

This is only a style change for the driver, with no functionality
updated.

Suggested-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Link: https://lore.kernel.org/linux-media/ubuuob7mb3o5bxoumrxv4rufutgk3lvdmdery6d3bfc6rytfti@tcchhlechzzp/
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-03-04 13:35:32 +01:00
Tarang Raval
5b1ea9af99 media: i2c: imx283: Drop runtime suspend/resume functions
The imx283_runtime_suspend and imx283_runtime_resume functions
simply call imx283_power_off and imx283_power_on, respectively.
Since these functions do not add any additional logic, they are
unnecessary and can be removed.

Signed-off-by: Tarang Raval <tarang.raval@siliconsignals.io>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-03-04 13:35:32 +01:00
Cosmin Tanislav
2256456c26 media: i2c: imx219: remove context around case
There are no longer variable declarations here, the context is useless.

Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-03-04 13:35:32 +01:00
Dan Carpenter
38985a2568 media: i2c: imx214: Fix uninitialized variable in imx214_set_ctrl()
You can't pass uninitialized "ret" variables to cci_write().  It has to
start as zero.

Fixes: 4f0aeba4f1 ("media: i2c: imx214: Convert to CCI register access helpers")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: André Apitzsch <git@apitzsch.eu>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-03-04 13:35:32 +01:00
Krzysztof Kozlowski
d8bf3298df media: omap3isp: Use syscon_regmap_lookup_by_phandle_args
Use syscon_regmap_lookup_by_phandle_args() which is a wrapper over
syscon_regmap_lookup_by_phandle() combined with getting the syscon
argument.  Except simpler code this annotates within one line that given
phandle has arguments, so grepping for code would be easier.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-03-04 13:35:32 +01:00
Robin Murphy
6bc076eec6 media: omap3isp: Handle ARM dma_iommu_mapping
It's no longer practical for the OMAP IOMMU driver to trick
arm_setup_iommu_dma_ops() into ignoring its presence, so let's use the
same tactic as other IOMMU API users on 32-bit ARM and explicitly kick
the arch code's dma_iommu_mapping out of the way to avoid problems.

Fixes: 4720287c7b ("iommu: Remove struct iommu_ops *iommu from arch_setup_dma_ops()")
Cc: stable@vger.kernel.org
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Sicelo A. Mhlongo <absicsz@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-03-04 13:35:32 +01:00
Bingbu Cao
6f0ab5d367 media: intel/ipu6: set the dev_parent of video device to pdev
The bus_info in v4l2_capability of IPU6 isys v4l2_dev is missing.
The driver didn't set the dev_parent of v4l2_dev, its parent is set
to its parent auxdev which is neither platform nor PCI device, thus
media_set_bus_info() will not set the bus_info of v4l2_capability, then
`v4l2-ctl --all` cannot show the bus_info.

This patch fixes it by setting the dev_parent of video_device and v4l2
framework can detect the device type and set the bus_info instead.

Fixes: 3c1dfb5a69 ("media: intel/ipu6: input system video nodes and buffer queues")
Cc: stable@vger.kernel.org
Signed-off-by: Hidenori Kobayashi <hidenorik@chromium.org>
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-03-04 13:35:31 +01:00
Mark Brown
5fac6c2785
Add STM32MP25 SPI NOR support
Merge series from patrice.chotard@foss.st.com:

This series adds SPI NOR support for STM32MP25 SoCs from STMicroelectronics.

On STM32MP25 SoCs family, an Octo Memory Manager block manages the muxing,
the memory area split, the chip select override and the time constraint
between its 2 Octo SPI children.

Due to these depedencies, this series adds support for:
  - Octo Memory Manager driver (not applied for SPI).
  - Octo SPI driver.
  - yaml schema for Octo Memory Manager and Octo SPI drivers.

The device tree files adds Octo Memory Manager and its 2 associated Octo
SPI chidren in stm32mp251.dtsi and adds SPI NOR support in stm32mp257f-ev1
board.
2025-03-04 12:34:18 +00:00
Linus Walleij
0a22454ab2
ASoC: samsung: tm2_wm5110: Drop unused include
This file does not use the symbols from the legacy
<linux/gpio.h> header, so let's drop it.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20250303-samsung-codecs-v1-6-56a2299dd928@linaro.org
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-04 12:29:38 +00:00
Linus Walleij
c095b7a275
ASoC: samsung: tobermory: Drop unused include
This file does not use the symbols from the legacy
<linux/gpio.h> header, so let's drop it.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20250303-samsung-codecs-v1-5-56a2299dd928@linaro.org
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-04 12:29:37 +00:00
Linus Walleij
da9146c19b
ASoC: samsung: speyside: Convert to GPIO descriptor
The Speyside ASoC uses a single GPIO from the WM8996
that we can provide from the local offset on that chip
rather than from the global GPIO numberspace as is being
done currently.

The offset 2 was done by calculating the base offset
for the CODEC (i.e. wm8996) GPIOs to 212, by reading
arch/arm/mach-s3c/gpio-samsung-s3c64xx.h and
arch/arm/mach-s3c/crag6410.h and adding up all the
offsets that were occasionally adding a +1 blank GPIO
between each GPIO provider.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20250303-samsung-codecs-v1-4-56a2299dd928@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-04 12:29:37 +00:00
Linus Walleij
5c06f7f3d8
ASoC: samsung: lowland: Drop unused include
This file does not use the symbols from the legacy
<linux/gpio.h> header, so let's drop it.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20250303-samsung-codecs-v1-3-56a2299dd928@linaro.org
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-04 12:29:36 +00:00
Linus Walleij
c4b2d9643a
ASoC: samsung: littlemill: Drop unused include
This file does not use the symbols from the legacy
<linux/gpio.h> header, so let's drop it.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20250303-samsung-codecs-v1-2-56a2299dd928@linaro.org
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-04 12:29:35 +00:00
Linus Walleij
b19d340d5d
ASoC: samsung: bells: Drop unused include
This file does not use the symbols from the legacy
<linux/gpio.h> header, so let's drop it.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20250303-samsung-codecs-v1-1-56a2299dd928@linaro.org
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-04 12:29:34 +00:00
Krzysztof Kozlowski
8243a49145
ASoC: dt-bindings: everest,es8328: Require reg property
ES8328 and ES8388 codecs are I2C or SPI devices, thus they are
addressable on their bus and 'reg' property should be always provided.
Requiring 'reg' is pretty close to redundant, because the I2C and SPI
controller/bus bindings require it already, but the convention is to
mention 'reg' also in the device schemas.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250304103808.75236-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-04 12:27:13 +00:00
Krzysztof Kozlowski
1d251a7adc
ASoC: dt-bindings: everest,es8328: Mark ES8388 compatible with ES8328
Based on Linux driver, the ES8388 looks fully compatible with ES8328.
One upstream DTS (ARM rk3288-rock2-square.dts) already uses ES8328
fallback, so mark the devices as compatible in the binding.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250304103808.75236-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-04 12:27:12 +00:00
Louis-Alexis Eyraud
79c080c75c
ASoC: mediatek: mt6359: Fix DT parse error due to wrong child node name
A recent dtbs_check error fix in mt6359.dtsi file changed a node name
(from "mt6359codec" to "audio-codec") without modifying the mt6539
codec code that uses it.
It leads to a probe failure after devicetree parsing returns in error:
```
[    1.354025] mt6359-sound mt6359-sound: mt6359_platform_driver_probe() failed to parse dts
[    1.355066] mt6359-sound mt6359-sound: probe with driver mt6359-sound failed with error -22
```

So, add the child node retrieval with the new name and if not found,
try with the older one for backward compatibility.

Fixes: 76b35f59bb ("arm64: dts: mediatek: mt6359: fix dtbs_check error for audio-codec")
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://patch.msgid.link/20250228-mt6359-fix-probe-failed-v1-1-64941d387b2c@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-04 12:27:11 +00:00