Commit graph

1,403,262 commits

Author SHA1 Message Date
Kever Yang
94e4fc4004 dt-bindings: iio: adc: Add rockchip,rk3562-saradc string
Add rockchip,rk3562-saradc compatible string.
The saradc on rk3562 is v2 controller, with 10bit width which is different
with rk3588.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250227110343.2342017-1-kever.yang@rock-chips.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-03-04 14:59:47 +00:00
Yafang Shao
376c879e04 livepatch: Add comment to clarify klp_add_nops()
Add detailed comments to clarify the purpose of klp_add_nops() function.
These comments are based on Petr's explanation[0].

Link: https://lore.kernel.org/all/Z6XUA7D0eU_YDMVp@pathway.suse.cz/ [0]
Suggested-by: Petr Mladek <pmladek@suse.com>
Suggested-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20250227024733.16989-2-laoar.shao@gmail.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
2025-03-04 15:59:07 +01:00
Plamen Atanasov
7a419b3bb8 media: cx23885: Add analog support for AVerMedia H789-C PCIe card
This card has the following ICs: Hybrid tuner TDA18271, CX23888 PCIe
bridge/demodulator/decoder (and DVB-T demodulator AF9013S, which is
not within the scope of this patch). It has the following inputs: Tuner,
S-Video, Composite (shared with the luma input of S-Video) and Audio L/R
RCA. VID:PID is 1461:e139. When the patch is applied and the cx23885
kernel module is built and loaded, the following dmesg can be seen:

[  749.677298] cx23885: cx23885 driver version 0.0.4 loaded
[  749.677554] cx23885: CORE cx23885[0]: subsystem: 1461:e139, board: AVerMedia H789-C [card=63,autodetected]
[  749.831841] cx25840 8-0044: cx23888 A/V decoder found @ 0x88 (cx23885[0])
[  750.451676] cx25840 8-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes)
[  750.488064] tuner: 7-0063: Tuner -1 found with type(s) Radio TV.
[  750.488115] tda18271 7-0063: creating new instance
[  750.490153] tda18271: TDA18271HD/C2 detected @ 7-0063
[  750.805043] cx23885: cx23885[0]: registered device video2 [v4l2]
[  750.805151] cx23885: cx23885[0]: registered device vbi2
[  750.808682] cx23885: cx23885[0]: alsa: registered ALSA audio device
[  750.808693] cx23885: cx23885_dev_checkrevision() Hardware revision = 0xd0
[  750.808700] cx23885: cx23885[0]/0: found at 0000:02:00.0, rev: 4, irq: 18, latency: 0, mmio: 0xddc00000

The card has to be defined in cx23885-cards.c (firmware also has to be
loaded) and cx23885.h. Moreover, audio routing is configured in
cx23885-video.c. Analog tuning, composite, s-video and stereo audio
inputs have been successfully tested with PAL B/G.

Signed-off-by: Plamen Atanasov <tigerment@mail.bg>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-03-04 15:56:11 +01:00
Sean Young
eb9919b541 media: rc: reduce useless padding in struct rc_dev etc
Reorder the fields in these structs so that we waste less space due to
padding. pahole shows that lirc_fh is 8 bytes smaller, and rc_dev is 32
bytes smaller.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
2025-03-04 15:56:11 +01:00
Dan Carpenter
15a007e7ae iio: adc: ad4030: fix error pointer dereference in probe()
The intention here was obviously to return an error if devm_regmap_init()
fails, but the return statement was accidentally left out.  This leads to
an error pointer dereference when we call:

	ret = ad4030_detect_chip_info(st);

Add the return statement.

Fixes: ec25cf6f1e ("iio: adc: ad4030: add support for ad4632-16 and ad4632-24")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/cc67cee7-9c65-46d2-aae3-f860fc3cc461@stanley.mountain
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-03-04 14:52:42 +00:00
Colin Ian King
5017dcb8fc iio: light: Fix spelling mistake "regist" -> "register"
There are spelling mistakes in dev_err messages. Fix them.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20250228090228.679535-1-colin.i.king@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-03-04 14:50:52 +00:00
Folker Schwesinger
fcd104f0ed iio: buffer-dma: Fix docstrings
Fix a typo in the docstring of iio_dma_buffer_read() and fix what looks
like a copy-and-paste error in the iio_dma_buffer_write() docstring.

Signed-off-by: Folker Schwesinger <dev@folker-schwesinger.de>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/D83IPSTKYWNB.1PUBV1530XI86@folker-schwesinger.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-03-04 14:49:31 +00:00
James Clark
182e8c7079 Coresight: Use coresight_etm_get_trace_id() in traceid_show()
Use the new API, coresight_etm_get_trace_id, to read the traceid of the ETM
device when call traceid_show via sysfs node.

Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Jie Gan <quic_jiegan@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250303032931.2500935-4-quic_jiegan@quicinc.com
2025-03-04 14:48:52 +00:00
Jie Gan
c367a89dec Coresight: Add trace_id function to retrieving the trace ID
Add 'trace_id' function pointer in coresight_ops. It's responsible for retrieving
the device's trace ID.

Co-developed-by: James Clark <james.clark@linaro.org>
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Jie Gan <quic_jiegan@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250303032931.2500935-3-quic_jiegan@quicinc.com
2025-03-04 14:48:49 +00:00
Jie Gan
dc872c5f52 Coresight: Add support for new APB clock name
Add support for new APB clock-name. If the function fails
to obtain the clock with the name "apb_pclk", it will
attempt to acquire the clock with the name "apb".

Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Jie Gan <quic_jiegan@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250303032931.2500935-2-quic_jiegan@quicinc.com
2025-03-04 14:48:43 +00:00
Andy Shevchenko
e646f0dae7 gpiolib-acpi: Drop unneeded ERR_CAST() in __acpi_find_gpio()
The checked type by PTR_ERR() is the same as returned by __acpi_find_gpio().
Hence there is no need to cast, drop it.

Acked-by: Mika Westerberg <westeri@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2025-03-04 16:47:10 +02:00
Bartosz Golaszewski
71cbbb7149 irqchip/davinci-cp-intc: Remove public header
There are no more users of irq-davinci-cp-intc.h (da830.c doesn't use
any of its symbols). Remove the header and make the driver stop using the
config structure.

[ tglx: Mop up coding style ]

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250304131815.86549-1-brgl@bgdev.pl
2025-03-04 15:46:59 +01:00
Jonas Karlman
8a9aa0bbd6 iio: adc: rockchip_saradc: Add support for RK3528
The Successive Approximation ADC (SARADC) in RK3528 uses the v2
controller and support:
- 10-bit resolution
- Up to 1MS/s sampling rate
- 4 single-ended input channels
- Current consumption: 0.5mA @ 1MS/s

Add support for the 4 channels of 10-bit resolution supported by SARADC
in RK3528.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20250227184058.2964204-3-jonas@kwiboo.se
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-03-04 14:45:33 +00:00
Jonas Karlman
d15fc646cc dt-bindings: iio: adc: Add rockchip,rk3528-saradc variant
The Successive Approximation ADC (SARADC) in RK3528 uses the v2
controller and support:
- 10-bit resolution
- Up to 1MS/s sampling rate
- 4 single-ended input channels
- Current consumption: 0.5mA @ 1MS/s

Add a rockchip,rk3562-saradc compatible string for the 4 channels of
10-bit resolution supported by SARADC in RK3528.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20250227184058.2964204-2-jonas@kwiboo.se
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-03-04 14:45:32 +00:00
Mark Brown
d6c0841895
ASoC: samsung: GPIO descriptor conversion
Merge series from Linus Walleij <linus.walleij@linaro.org>:

This drops unused includes and converts one Samsung
codec to use GPIO descriptors.
2025-03-04 14:43:59 +00:00
Mark Brown
24056de997
ASoC: codecs: Update device_id tables for Realtek
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:

The series aims to streamline the formatting for ACPI IDs so that a
single pattern can be used to identify the device.

Work implicitly suggested by Andy Shevchenko - reading and learning from
number of his reviews on the Linux mailing lists.

Several formats do exists, however, after technical discussion PCI-based
format has been selected as the recommended one. For Realtek devices, it
is going to be 10ECxxxx where 10EC unambiguously identifies Realtek
company whereas the following 4 hexes specify the PART_ID i.e.: the
device.

While at it, there shall be no comma after the terminator entry and
initializing fields with 0 for statically defined structs is redundant.
2025-03-04 14:43:55 +00:00
Mark Brown
ee3cce59b1
ASoC: use inclusive language for
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:

We have both

	(A) SND_SOC_DAIFMT_CB{M/S}_CF{M/S} : Master/Slave.
	(B) SND_SOC_DAIFMT_CB{P/C}_CF{P/S} : Provider/Consumer

We should use (B), and want to remove (A). This patch-set do it.
2025-03-04 14:43:50 +00:00
Mark Brown
56e8bbb7a0
ASoC: audio-graph-card2-custom-sample: Separate Sample
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:

audio-graph-card2-custom-sample has many sample connections, but because
ALSA card has number limition for links, it is impossible to have all
samples into 1 ASoC card.

This patch-set separate sample DT into 2 parts, and remove original sample.
Because of this separation, we can see all sample connection via multi Card.

	- for normal
	- for DPCM/Codec2Codec
2025-03-04 14:43:46 +00:00
Maciej Strozek
164b7dd454
ASoC: cs42l43: Add jack delay debounce after suspend
Hardware reports jack absent after reset/suspension regardless of jack
state, so introduce an additional delay only in suspension case to allow
proper detection to take place after a short delay.

Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250304140504.139245-1-mstrozek@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-04 14:43:38 +00:00
Ville Syrjälä
463c93a18c drm/i915: Reoder gen9+ timestamp freq register bits
We customarily define the bits of a register in big endian
order. Reorder the gen9+ timestamp freq register bits to match.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250211231941.22769-13-ville.syrjala@linux.intel.com
2025-03-04 15:39:38 +01:00
Ville Syrjälä
26a4463e61 drm/i915: Use REG_BIT() & co. for gen9+ timestamp freq registers
Convert the gen9+ timestamo frequency related registers to
the modern REG_BIT()/etc. style.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250211231941.22769-12-ville.syrjala@linux.intel.com
2025-03-04 15:39:37 +01:00
Ville Syrjälä
4cdaba1bb0 drm/i915: Reoder BDW+ EU/slice fuse bits
We customarily define the bits of a register in big endian
order. Reorder the BDW+ fuse bits to match.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250211231941.22769-11-ville.syrjala@linux.intel.com
2025-03-04 15:39:37 +01:00
Ville Syrjälä
d75131164e drm/i915: Use REG_BIT() & co. for BDW+ EU/slice fuse bits
Convert the BDW+ EU/slice fuse bits to the modern REG_BIT()/etc.
style.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250211231941.22769-10-ville.syrjala@linux.intel.com
2025-03-04 15:39:35 +01:00
Ville Syrjälä
d4ca1a8b33 drm/i915: Reoder CHV EU/slice fuse bits
We customarily define the bits of a register in big endian
order. Reorder the CHV fuse bits to match.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250211231941.22769-9-ville.syrjala@linux.intel.com
2025-03-04 15:39:35 +01:00
Ville Syrjälä
dcf9969259 drm/i915: Use REG_BIT() & co. for CHV EU/slice fuse bits
Convert the CHV EU/slice fuse bits to the modern REG_BIT()/etc.
style.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250211231941.22769-8-ville.syrjala@linux.intel.com
2025-03-04 15:39:34 +01:00
Ville Syrjälä
5e3e23b825 drm/i915: Extract gen8_report_fault()
gen8_check_faults() and xehp_check_faults() are nearly identical.
Refactor the common bits into gen8_report_fault().

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250211231941.22769-7-ville.syrjala@linux.intel.com
2025-03-04 15:39:33 +01:00
Ville Syrjälä
50c8299762 drm/i915: Introduce RING_FAULT_VADDR_MASK
Add a proper bitmask definition for the pre-bdw fault
virtual address bits insted of abusing PAGE_MASK.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250211231941.22769-6-ville.syrjala@linux.intel.com
2025-03-04 15:39:32 +01:00
Ville Syrjälä
66ec4c1ab1 drm/i915: Document which RING_FAULT bits apply to which platforms
The RING_FAULT bits have change a bit over the years. Document
which platforms use which bits.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250211231941.22769-5-ville.syrjala@linux.intel.com
2025-03-04 15:39:32 +01:00
Ville Syrjälä
f46fa84bdb drm/i915: Use REG_BIT() & co. for ring fault registers
Update the ring fault registers to use the modern REG_BIT()
stuff.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250211231941.22769-4-ville.syrjala@linux.intel.com
2025-03-04 15:39:31 +01:00
Ville Syrjälä
ecba96d2f8 drm/i915: Relocate RING_FAULT bits
We share the bit definitions between the older
RING_FAULT registers and their various gen12+
counterparts. Currently the bits are defined next
to the new registers which isn't what we typically do.

Move the bit definitions next the older register offsets,
and leave breadcrumbs around the gen12+ registers to make
it easier to find the right bits.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250211231941.22769-3-ville.syrjala@linux.intel.com
2025-03-04 15:39:30 +01:00
Ville Syrjälä
600a0c7e76 drm/i915: Bump RING_FAULT engine ID bits
The fault engine ID field has been 5 bits since icl. Bump our
define to match. The extra bits were unused before icl so we
should be able to use the larger mask unconditionally.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250211231941.22769-2-ville.syrjala@linux.intel.com
2025-03-04 15:39:23 +01:00
Krzysztof Kozlowski
ced36c336d arm64: dts: rockchip: Add ES8388 audio codec fallback on RK3588 boards
Devicetree bindings for ES8388 audio codec expect the device to be
marked as compatible with ES8328.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250304104200.76178-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-04 15:32:28 +01:00
Krzysztof Kozlowski
d83f6c32d7 arm64: dts: rockchip: Add ES8388 audio codec fallback on RK3399 ROC PC PLUS
Devicetree bindings for ES8388 audio codec expect the device to be
marked as compatible with ES8328.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250304104200.76178-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-03-04 15:32:27 +01:00
Paolo Abeni
5b62996184 Merge branch 'netconsole-add-taskname-sysdata-support'
Breno Leitao says:

====================
netconsole: Add taskname sysdata support

This patchset introduces a new feature to the netconsole extradata
subsystem that enables the inclusion of the current task's name in the
sysdata output of netconsole messages.

This enhancement is particularly valuable for large-scale deployments,
such as Meta's, where netconsole collects messages from millions of
servers and stores them in a data warehouse for analysis. Engineers
often rely on these messages to investigate issues and assess kernel
health.

One common challenge we face is determining the context in which
a particular message was generated. By including the task name
(task->comm) with each message, this feature provides a direct answer to
the frequently asked question: "What was running when this message was
generated?"

This added context will significantly improve our ability to diagnose
and troubleshoot issues, making it easier to interpret output of
netconsole.

The patchset consists of seven patches that implement the following changes:

 * Refactor CPU number formatting into a separate function
 * Prefix CPU_NR sysdata feature with SYSDATA_
 * Patch to covert a bitwise operation into boolean
 * Add configfs controls for taskname sysdata feature
 * Add taskname to extradata entry count
 * Add support for including task name in netconsole's extra data output
 * Document the task name feature in Documentation/networking/netconsole.rst
 * Add test coverage for the task name feature to the existing sysdata selftest script

These changes allow users to enable or disable the task name feature via
configfs and provide additional context for kernel messages by showing
which task generated each console message.

I have tested these patches on some servers and they seem to work as
expected.

v1: https://lore.kernel.org/r/20250221-netcons_current-v1-0-21c86ae8fc0d@debian.org

Signed-off-by: Breno Leitao <leitao@debian.org>
====================

Link: https://patch.msgid.link/20250228-netcons_current-v2-0-f53ff79a0db2@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04 15:28:31 +01:00
Breno Leitao
d7a2522426 netconsole: selftest: add task name append testing
Add test coverage for the netconsole task name feature to the existing
sysdata selftest script. This extends the test infrastructure to verify
that task names are correctly appended when enabled and absent when
disabled.

The test validates that:
  - Task names appear in the expected format "taskname=<name>"
  - Task names are included when the feature is enabled
  - Task names are excluded when the feature is disabled
  - The feature works correctly alongside other sysdata fields like CPU

Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04 15:28:28 +01:00
Breno Leitao
7010b61983 netconsole: docs: document the task name feature
Add documentation for the netconsole task name feature in
Documentation/networking/netconsole.rst. This explains how to enable
task name via configfs and demonstrates the output format.

The documentation includes:
- How to enable/disable the feature via taskname_enabled
- The format of the task name in the output
- An example showing the task name appearing in messages

Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04 15:28:28 +01:00
Breno Leitao
dd30ae5332 netconsole: add task name to extra data fields
This is the core patch for this whole patchset. Add support for
including the current task's name in netconsole's extra data output.
This adds a new append_taskname() function that writes the task name
(from current->comm) into the target's extradata buffer, similar to how
CPU numbers are handled.

The task name is included when the SYSDATA_TASKNAME field is set,
appearing in the format "taskname=<name>" in the output. This additional
context can help with debugging by showing which task generated each
console message.

Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04 15:28:28 +01:00
Breno Leitao
09e877590b netconsole: add configfs controls for taskname sysdata feature
Add configfs interface to enable/disable the taskname sysdata feature.
This adds the following functionality:

The implementation follows the same pattern as the existing CPU number
feature, ensuring consistent behavior and error handling across sysdata
features.

Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04 15:28:28 +01:00
Breno Leitao
33e4b29f2b netconsole: add taskname to extradata entry count
New SYSDATA_TASKNAME feature flag to track when taskname append is enabled.

Additional check in count_extradata_entries() to include taskname in
total, counting it as an entry in extradata. This function is used to
check if we are not overflowing the number of extradata items.

Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04 15:28:28 +01:00
Breno Leitao
4d989521a9 netconsole: refactor CPU number formatting into separate function
Extract CPU number formatting logic from prepare_extradata() into a new
append_cpu_nr() function.

This refactoring improves code organization by isolating CPU number
formatting into its own function while reducing the complexity of
prepare_extradata().

The change prepares the codebase for the upcoming taskname feature by
establishing a consistent pattern for handling sysdata features.

The CPU number formatting logic itself remains unchanged; only its
location has moved to improve maintainability.

Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04 15:28:27 +01:00
Breno Leitao
efb878fbe8 netconsole: Make boolean comparison consistent
Convert the current state assignment to use explicit boolean conversion,
making the code more robust and easier to read. This change adds a
double-negation operator to ensure consistent boolean conversion as
suggested by Paolo[1].

This approach aligns with the existing pattern used in
sysdata_cpu_nr_enabled_show().

Link: https://lore.kernel.org/all/7309e760-63b0-4b58-ad33-2fb8db361141@redhat.com/ [1]
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04 15:28:27 +01:00
Breno Leitao
8a683295c2 netconsole: prefix CPU_NR sysdata feature with SYSDATA_
Rename the CPU_NR enum value to SYSDATA_CPU_NR to establish a consistent
naming convention for sysdata features. This change prepares for
upcoming additions to the sysdata feature set by clearly grouping
related features under the SYSDATA prefix.

This change is purely cosmetic and does not modify any functionality.

Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04 15:28:27 +01:00
David Lechner
7867a0d1dd MAINTAINERS: remove adi,ad7606.yaml from SEPS525
Remove Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml from
STAGING - SEPS525 LCD CONTROLLER DRIVERS. This was likley a copy/paste
mistake. There is no bindings file for SEPS525 since it is only in
staging.

The removed file matches Documentation/devicetree/bindings/iio/*/adi,*
under ANALOG DEVICES INC IIO DRIVERS already so wasn't just misplaced.

Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250303-maintainers-remove-adi-ad7606-yaml-from-seps525-lcd-controller-v1-1-a4e4f1b824ab@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-03-04 14:28:11 +00:00
Caleb Sander Mateos
fe21a4532e io_uring/rsrc: skip NULL file/buffer checks in io_free_rsrc_node()
io_rsrc_node's of type IORING_RSRC_FILE always have a file attached
immediately after they are allocated. IORING_RSRC_BUFFER nodes won't be
returned from io_sqe_buffer_register()/io_buffer_register_bvec() until
they have a io_mapped_ubuf attached.

So remove the checks for a NULL file/buffer in io_free_rsrc_node().

Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Link: https://lore.kernel.org/r/20250228235916.670437-5-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-03-04 07:17:15 -07:00
Caleb Sander Mateos
6e5d321a08 io_uring/rsrc: avoid NULL node check on io_sqe_buffer_register() failure
The done: label is only reachable if node is non-NULL. So don't bother
checking, just call io_free_node().

Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Link: https://lore.kernel.org/r/20250228235916.670437-4-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-03-04 07:17:15 -07:00
Caleb Sander Mateos
13f7f9686e io_uring/rsrc: call io_free_node() on io_sqe_buffer_register() failure
io_sqe_buffer_register() currently calls io_put_rsrc_node() if it fails
to fully set up the io_rsrc_node. io_put_rsrc_node() is more involved
than necessary, since we already know the reference count will reach 0
and no io_mapped_ubuf has been attached to the node yet.

So just call io_free_node() to release the node's memory. This also
avoids the need to temporarily set the node's buf pointer to NULL.

Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Link: https://lore.kernel.org/r/20250228235916.670437-3-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-03-04 07:17:15 -07:00
Caleb Sander Mateos
a387b96d2a io_uring/rsrc: free io_rsrc_node using kfree()
io_rsrc_node_alloc() calls io_cache_alloc(), which uses kmalloc() to
allocate the node. So it can be freed with kfree() instead of kvfree().

Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Link: https://lore.kernel.org/r/20250228235916.670437-2-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-03-04 07:17:15 -07:00
Caleb Sander Mateos
6a53541829 io_uring/rsrc: split out io_free_node() helper
Split the freeing of the io_rsrc_node from io_free_rsrc_node(), for use
with nodes that haven't been fully initialized.

Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Link: https://lore.kernel.org/r/20250228235916.670437-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-03-04 07:17:15 -07:00
Caleb Sander Mateos
a1967280a1 io_uring/rsrc: include io_uring_types.h in rsrc.h
io_uring/rsrc.h uses several types from include/linux/io_uring_types.h.
Include io_uring_types.h explicitly in rsrc.h to avoid depending on
users of rsrc.h including io_uring_types.h first.

Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Li Zetao <lizetao1@huawei.com>
Link: https://lore.kernel.org/r/20250301183612.937529-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-03-04 07:16:07 -07:00
Zhu Yanjun
3aab938c93 loop: Remove struct loop_func_table
The struct is introduced in the commit 754d96798f
("loop: remove loop.h"), but it is not used now.
So remove it.

No functional changes.

Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250227163343.55952-1-yanjun.zhu@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-03-04 07:14:47 -07:00