Move KVM's snapshot of DEBUGCTL to kvm_vcpu_arch and take the snapshot in
common x86, so that SVM can also use the snapshot.
Opportunistically change the field to a u64. While bits 63:32 are reserved
on AMD, not mentioned at all in Intel's SDM, and managed as an "unsigned
long" by the kernel, DEBUGCTL is an MSR and therefore a 64-bit value.
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Cc: stable@vger.kernel.org
Reviewed-and-tested-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250227222411.3490595-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Mark BTF as reserved in DEBUGCTL on AMD, as KVM doesn't actually support
BTF, and fully enabling BTF virtualization is non-trivial due to
interactions with the emulator, guest_debug, #DB interception, nested SVM,
etc.
Don't inject #GP if the guest attempts to set BTF, as there's no way to
communicate lack of support to the guest, and instead suppress the flag
and treat the WRMSR as (partially) unsupported.
In short, make KVM behave the same on AMD and Intel (VMX already squashes
BTF).
Note, due to other bugs in KVM's handling of DEBUGCTL, the only way BTF
has "worked" in any capacity is if the guest simultaneously enables LBRs.
Reported-by: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: stable@vger.kernel.org
Reviewed-and-tested-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250227222411.3490595-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Drop bits 5:2 from the guest's effective DEBUGCTL value, as AMD changed
the architectural behavior of the bits and broke backwards compatibility.
On CPUs without BusLockTrap (or at least, in APMs from before ~2023),
bits 5:2 controlled the behavior of external pins:
Performance-Monitoring/Breakpoint Pin-Control (PBi)—Bits 5:2, read/write.
Software uses thesebits to control the type of information reported by
the four external performance-monitoring/breakpoint pins on the
processor. When a PBi bit is cleared to 0, the corresponding external pin
(BPi) reports performance-monitor information. When a PBi bit is set to
1, the corresponding external pin (BPi) reports breakpoint information.
With the introduction of BusLockTrap, presumably to be compatible with
Intel CPUs, AMD redefined bit 2 to be BLCKDB:
Bus Lock #DB Trap (BLCKDB)—Bit 2, read/write. Software sets this bit to
enable generation of a #DB trap following successful execution of a bus
lock when CPL is > 0.
and redefined bits 5:3 (and bit 6) as "6:3 Reserved MBZ".
Ideally, KVM would treat bits 5:2 as reserved. Defer that change to a
feature cleanup to avoid breaking existing guest in LTS kernels. For now,
drop the bits to retain backwards compatibility (of a sort).
Note, dropping bits 5:2 is still a guest-visible change, e.g. if the guest
is enabling LBRs *and* the legacy PBi bits, then the state of the PBi bits
is visible to the guest, whereas now the guest will always see '0'.
Reported-by: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: stable@vger.kernel.org
Reviewed-and-tested-by: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20250227222411.3490595-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Inject a #GP if the memory operand received by INVCPID is non-canonical.
The APM clearly states that the intercept takes priority over all #GP
checks except the CPL0 restriction.
Of course, that begs the question of how the CPU generates a linear
address in the first place. Tracing confirms that EXITINFO1 does hold a
linear address, at least for 64-bit mode guests (hooray GS prefix).
Unfortunately, the APM says absolutely nothing about the EXITINFO fields
for INVPCID intercepts, so it's not at all clear what's supposed to
happen.
Add a FIXME to call out that KVM still does the wrong thing for 32-bit
guests, and if the stack segment is used for the memory operand.
Cc: Babu Moger <babu.moger@amd.com>
Cc: Jim Mattson <jmattson@google.com>
Fixes: 4407a797e9 ("KVM: SVM: Enable INVPCID feature on AMD")
Link: https://lore.kernel.org/r/20250224174522.2363400-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Extend KVM's restrictions on userspace forcing "emulation required" at odd
times to cover stuffing invalid guest state while a nested run is pending.
Clobbering guest state while KVM is in the middle of emulating VM-Enter is
nonsensical, as it puts the vCPU into an architecturally impossible state,
and will trip KVM's sanity check that guards against KVM bugs, e.g. helps
detect missed VMX consistency checks.
WARNING: CPU: 3 PID: 6336 at arch/x86/kvm/vmx/vmx.c:6480 __vmx_handle_exit arch/x86/kvm/vmx/vmx.c:6480 [inline]
WARNING: CPU: 3 PID: 6336 at arch/x86/kvm/vmx/vmx.c:6480 vmx_handle_exit+0x40f/0x1f70 arch/x86/kvm/vmx/vmx.c:6637
Modules linked in:
CPU: 3 UID: 0 PID: 6336 Comm: syz.0.73 Not tainted 6.13.0-rc1-syzkaller-00316-gb5f217084ab3 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:__vmx_handle_exit arch/x86/kvm/vmx/vmx.c:6480 [inline]
RIP: 0010:vmx_handle_exit+0x40f/0x1f70 arch/x86/kvm/vmx/vmx.c:6637
<TASK>
vcpu_enter_guest arch/x86/kvm/x86.c:11081 [inline]
vcpu_run+0x3047/0x4f50 arch/x86/kvm/x86.c:11242
kvm_arch_vcpu_ioctl_run+0x44a/0x1740 arch/x86/kvm/x86.c:11560
kvm_vcpu_ioctl+0x6ce/0x1520 virt/kvm/kvm_main.c:4340
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:906 [inline]
__se_sys_ioctl fs/ioctl.c:892 [inline]
__x64_sys_ioctl+0x190/0x200 fs/ioctl.c:892
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Reported-by: syzbot+ac0bc3a70282b4d586cc@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/67598fb9.050a0220.17f54a.003b.GAE@google.com
Debugged-by: James Houghton <jthoughton@google.com>
Tested-by: James Houghton <jthoughton@google.com>
Link: https://lore.kernel.org/r/20250224171409.2348647-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add an L1 (guest) assert to the nested exceptions test to verify that KVM
doesn't put VMRUN in an STI shadow (AMD CPUs bleed the shadow into the
guest's int_state if a #VMEXIT occurs before VMRUN fully completes).
Add a similar assert to the VMX side as well, because why not.
Reviewed-by: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20250224165442.2338294-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Enable/disable local IRQs, i.e. set/clear RFLAGS.IF, in the common
svm_vcpu_enter_exit() just after/before guest_state_{enter,exit}_irqoff()
so that VMRUN is not executed in an STI shadow. AMD CPUs have a quirk
(some would say "bug"), where the STI shadow bleeds into the guest's
intr_state field if a #VMEXIT occurs during injection of an event, i.e. if
the VMRUN doesn't complete before the subsequent #VMEXIT.
The spurious "interrupts masked" state is relatively benign, as it only
occurs during event injection and is transient. Because KVM is already
injecting an event, the guest can't be in HLT, and if KVM is querying IRQ
blocking for injection, then KVM would need to force an immediate exit
anyways since injecting multiple events is impossible.
However, because KVM copies int_state verbatim from vmcb02 to vmcb12, the
spurious STI shadow is visible to L1 when running a nested VM, which can
trip sanity checks, e.g. in VMware's VMM.
Hoist the STI+CLI all the way to C code, as the aforementioned calls to
guest_state_{enter,exit}_irqoff() already inform lockdep that IRQs are
enabled/disabled, and taking a fault on VMRUN with RFLAGS.IF=1 is already
possible. I.e. if there's kernel code that is confused by running with
RFLAGS.IF=1, then it's already a problem. In practice, since GIF=0 also
blocks NMIs, the only change in exposure to non-KVM code (relative to
surrounding VMRUN with STI+CLI) is exception handling code, and except for
the kvm_rebooting=1 case, all exception in the core VM-Enter/VM-Exit path
are fatal.
Use the "raw" variants to enable/disable IRQs to avoid tracing in the
"no instrumentation" code; the guest state helpers also take care of
tracing IRQ state.
Oppurtunstically document why KVM needs to do STI in the first place.
Reported-by: Doug Covelli <doug.covelli@broadcom.com>
Closes: https://lore.kernel.org/all/CADH9ctBs1YPmE4aCfGPNBwA10cA8RuAk2gO7542DjMZgs4uzJQ@mail.gmail.com
Fixes: f14eec0a32 ("KVM: SVM: move more vmentry code to assembly")
Cc: stable@vger.kernel.org
Reviewed-by: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20250224165442.2338294-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
That macro acts as a different name for for_each_tdp_pte, apart from
adding cognitive load it doesn't bring any value. Let's remove it.
Signed-off-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/20250226074131.312565-1-nik.borisov@suse.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Define independent macros for the RWX protection bits that are enumerated
via EXIT_QUALIFICATION for EPT Violations, and tie them to the RWX bits in
EPT entries via compile-time asserts. Piggybacking the EPTE defines works
for now, but it creates holes in the EPT_VIOLATION_xxx macros and will
cause headaches if/when KVM emulates Mode-Based Execution (MBEC), or any
other features that introduces additional protection information.
Opportunistically rename EPT_VIOLATION_RWX_MASK to EPT_VIOLATION_PROT_MASK
so that it doesn't become stale if/when MBEC support is added.
No functional change intended.
Cc: Jon Kohler <jon@nutanix.com>
Cc: Nikolay Borisov <nik.borisov@suse.com>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/20250227000705.3199706-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Those defines are only used in the definition of the various
EPT_VIOLATIONS_ACC_* macros which are then used to extract respective
bits from vmexit error qualifications. Remove the _BIT defines and
redefine the _ACC ones via BIT() macro. No functional changes.
Signed-off-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/20250227000705.3199706-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Document Adreno 623 GMU in the dt-binding specification.
Signed-off-by: Jie Zhang <quic_jiezh@quicinc.com>
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/640058/
Signed-off-by: Rob Clark <robdclark@chromium.org>
-----BEGIN PGP SIGNATURE-----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=J9H9
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.14-20250228' of git://git.kernel.dk/linux
Pull io_uring fix from Jens Axboe:
"Just a single fix headed for stable, ensuring that msg_control is
properly saved in compat mode as well"
* tag 'io_uring-6.14-20250228' of git://git.kernel.dk/linux:
io_uring/net: save msg_control for compat
For !ACPI builds, the acpi_device_id table will not be referenced
because of ACPI_PTR:
rtc-fsl-ftm-alarm.c:312:36: error: unused variable 'ftm_imx_acpi_ids' [-Werror,-Wunused-const-variable]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250222114146.162835-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
- Fix CPER error record parsing bugs
- Fix a couple of efivarfs issues that were introduced in the merge
window
- Fix an issue in the early remapping code of the MOKvar table
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZ8G8cgAKCRAwbglWLn0t
XMQDAQDNgLENwTSbVZlJaXqc3EEb0hTeV1Rg1WG9gB5DJg5bFgD/ZoWxbY6um/Pn
Pa7jg3tCR4bINq7WRVbMAocORGN8ZAY=
=HbXA
-----END PGP SIGNATURE-----
Merge tag 'efi-fixes-for-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
"Another couple of EFI fixes for v6.14.
Only James's patch stands out, as it implements a workaround for odd
behavior in fwupd in user space, which creates EFI variables by
touching a file in efivarfs, clearing the immutable bit (which gets
set automatically for $reasons) and then opening it again for writing,
none of which is really necessary.
The fwupd author and LVFS maintainer is already rolling out a fix for
this on the fwupd side, and suggested that the workaround in this PR
could be backed out again during the next cycle.
(There is a semantic mismatch in efivarfs where some essential
variable attributes are stored in the first 4 bytes of the file, and
so zero length files cannot exist, as they cannot be written back to
the underlying variable store. So now, they are dropped once the last
reference is released.)
Summary:
- Fix CPER error record parsing bugs
- Fix a couple of efivarfs issues that were introduced in the merge
window
- Fix an issue in the early remapping code of the MOKvar table"
* tag 'efi-fixes-for-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/mokvar-table: Avoid repeated map/unmap of the same page
efi: Don't map the entire mokvar table to determine its size
efivarfs: allow creation of zero length files
efivarfs: Defer PM notifier registration until .fill_super
efi/cper: Fix cper_arm_ctx_info alignment
efi/cper: Fix cper_ia_proc_ctx alignment
host1x_debug_dump_syncpts() has been unused since
commit f0fb260a0c ("gpu: host1x: Implement syncpoint wait using DMA
fences")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241215214750.448209-1-linux@treblig.org
Commit:
03b122da74 ("x86/sgx: Hook arch_memory_failure() into mainline code")
... added <linux/mm.h> to <asm/set_memory.h> to provide some helpers.
However the following commit:
b3fdf9398a ("x86/mce: relocate set{clear}_mce_nospec() functions")
... moved the inline definitions someplace else, and now <asm/set_memory.h>
just declares a bunch of mostly self-contained functions.
No need for the whole <linux/mm.h> inclusion to declare functions; just
remove that include. This helps avoid circular dependency headaches
(e.g. if <linux/mm.h> ends up including <linux/set_memory.h>).
This change requires a couple of include fixups not to break the
build:
* <asm/smp.h>: including <asm/thread_info.h> directly relies on
<linux/thread_info.h> having already been included, because the
former needs the BAD_STACK/NOT_STACK constants defined in the
latter. This is no longer the case when <asm/smp.h> is included from
some driver file - just include <linux/thread_info.h> to stay out
of trouble.
* sev-guest.c relies on <asm/set_memory.h> including <linux/mm.h>,
so we just need to make that include explicit.
[ mingo: Cleaned up the changelog ]
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20241212080904.2089632-3-kevin.brodsky@arm.com
__set_memory_prot() is unused since:
5c11f00b09 ("x86: remove memory hotplug support on X86_32")
Let's remove it.
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20241212080904.2089632-2-kevin.brodsky@arm.com
The syzbot reproducer mounts a f2fs image, then tries to unlink an
existing file. However, the unlinked file already has a link count of 0
when it is read for the first time in do_read_inode().
Add a check to sanity_check_inode() for i_nlink == 0.
[Chao Yu: rebase the code and fix orphan inode recovery issue]
Reported-by: syzbot+b01a36acd7007e273a83@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b01a36acd7007e273a83
Fixes: 39a53e0ce0 ("f2fs: add superblock and major in-memory structure")
Signed-off-by: Leo Stone <leocstone@gmail.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In the hope of contributing to type safety in our code, let's ensure
that the type returned by the POWER_DOMAIN_*() macros is always of type
enum intel_display_power_domain.
v2:
- Remove accidental +1 in definition of POWER_DOMAIN_PIPE(). (Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250227-improve-type-safey-power-domain-macros-v3-2-b6eaa00f9c33@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Although we have comments in intel_display_limits.h saying that the
code expects PIPE_A and TRANSCODER_A to be zero, it doesn't hurt to add
them as explicit base values for calculating the power domain offset in
POWER_DOMAIN_*() macros.
On the plus side, we have that this:
* Fixes a warning reported by kernel test robot <lkp@intel.com>
about doing arithmetic with two different enum types.
* Makes the code arguably more robust (in the unlikely event of those
bases becoming non-zero).
v2:
- Prefer using explicit base values instead of simply casting the
macro argument to int. (Ville)
- Update commit message to match the new approach (for reference, the
old message subject was "drm/i915/display: Use explicit cast in
POWER_DOMAIN_*() macros").
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202502120809.XfmcqkBD-lkp@intel.com/
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250227-improve-type-safey-power-domain-macros-v3-1-b6eaa00f9c33@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Enable zero copy on file backed target, meantime add one fio test for
covering write verify, another test for mkfs/mount/umount.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250228161919.2869102-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add file backed ublk target code, meantime add one fio test for
covering write verify, another test for mkfs/mount/umount.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250228161919.2869102-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Both ublk driver and userspace heavily depends on io_uring subsystem,
and tools/testing/selftests/ should be the best place for holding this
cross-subsystem tests.
Add basic read/write IO test over this ublk null disk, and make sure ublk
working.
More tests will be added.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250228161919.2869102-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If checkpoint was disabled, we missed to fix the write pointers.
Cc: <stable@vger.kernel.org>
Fixes: 1015035609 ("f2fs: fix changing cursegs if recovery fails on zoned device")
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
commit 4f993264fe ("f2fs: introduce discard_unit mount option") introduced
a bug, when we enable discard_unit=section option, it will set
.discard_granularity to BLKS_PER_SEC(), however discard granularity only
supports [1, 512], once section size is not equal to segment size, it will
cause issue_discard_thread() in DPOLICY_BG mode will not select discard entry
w/ any granularity to issue.
Fixes: 4f993264fe ("f2fs: introduce discard_unit mount option")
Reviewed-by: Daeho Jeong <daehojeong@google.com>
Signed-off-by: Yohan Joung <yohan.joung@sk.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The three dependent series on a shared branch:
- Change the iommufd fault handle into an always present hwpt handle in
the domain
- Give iommufd its own SW_MSI implementation along with some IRQ layer
rework
- Improvements to the handle attach API
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZ8HEaQAKCRCFwuHvBreF
YfEHAP9khiTmkfsx5JGBtKMqFbF/TShyZfgcLTCWw/VGXLcdswD/fnxA8L+y6zD4
9P73iOqSfHRV69dXu9CU6duZZifWawI=
=YZh7
-----END PGP SIGNATURE-----
Merge tag 'for-joerg' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd into core
iommu shared branch with iommufd
The three dependent series on a shared branch:
- Change the iommufd fault handle into an always present hwpt handle in
the domain
- Give iommufd its own SW_MSI implementation along with some IRQ layer
rework
- Improvements to the handle attach API
The gpiod_direction_input_nonotify() function is supposed to return zero
if the direction for the pin is input. But instead it accidentally
returns GPIO_LINE_DIRECTION_IN (1) which will be cast into an ERR_PTR()
in gpiochip_request_own_desc(). The callers dereference it and it leads
to a crash.
I changed gpiod_direction_output_raw_commit() just for consistency but
returning GPIO_LINE_DIRECTION_OUT (0) is fine.
Cc: stable@vger.kernel.org
Fixes: 9d846b1aeb ("gpiolib: check the return value of gpio_chip::get_direction()")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/254f3925-3015-4c9d-aac5-bb9b4b2cd2c5@stanley.mountain
[Bartosz: moved the variable declarations to the top of the functions]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Wa_14020863754 applies to the display IP, so we should be checking on
display IP version instead of platform. So, let's replace
display->platform.battlemage with the proper IP version check (14.01 for
Xe2_HPD).
Furthermore, for workarounds, we should be checking on full IP versions
to avoid applying the workaround to some variant of the IP that could
theoretically appear in the future (which is likely to have a different
minor release number), since the issue addressed by the workaround could
be fixed in such new release.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250227-xe3lpd-wa-14020863754-v2-1-92b35de1c563@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
High-availability Seamless Redundancy (HSR) protocol can be
realized with any two port ethernet controller.
Many of TI's K3 SoCs, such as AM64x and AM65x, support multi-port
ethernet controller like those seen on AM654x-EVM and AM64xx-EVM
platforms. So, enable the HSR driver to support this protocol.
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://lore.kernel.org/r/20250227111828.1963918-1-m-malladi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The current implementation stores entry to the group->pasid_array before
the underlying iommu driver has successfully set the new domain. This can
lead to issues where PRIs are received on the new domain before the attach
operation is completed.
This patch swaps the order of operations to ensure that the domain is set
in the underlying iommu driver before updating the group->pasid_array.
Link: https://patch.msgid.link/r/20250226011849.5102-5-yi.l.liu@intel.com
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
iommu_attach_device_pasid() only stores handle to group->pasid_array
when there is a valid handle input. However, it makes the
iommu_attach_device_pasid() unable to detect if the pasid has been
attached or not previously.
To be complete, let the iommu_attach_device_pasid() store the domain
to group->pasid_array if no valid handle. The other users of the
group->pasid_array should be updated to be consistent. e.g. the
iommu_attach_group_handle() and iommu_replace_group_handle().
Link: https://patch.msgid.link/r/20250226011849.5102-4-yi.l.liu@intel.com
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
iommufd does not use it now, so drop it.
Link: https://patch.msgid.link/r/20250226011849.5102-3-yi.l.liu@intel.com
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Caller of the two APIs always provide a valid handle, make @handle as
mandatory parameter. Take this chance incoporate the handle->domain
set under the protection of group->mutex in iommu_attach_group_handle().
Link: https://patch.msgid.link/r/20250226011849.5102-2-yi.l.liu@intel.com
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Device mapper bioset often has big bio_slab size, which can be more than
1000, then 8byte can't hold the slab name any more, cause the kmem_cache
allocation warning of 'kmem_cache of name 'bio-108' already exists'.
Fix the warning by extending bio_slab->name to 12 bytes, but fix output
of /proc/slabinfo
Reported-by: Guangwu Zhang <guazhang@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250228132656.2838008-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Frequent alloc/free cycles on these is pretty costly. Use an io cache to
more efficiently reuse these buffers.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20250227223916.143006-7-kbusch@meta.com
[axboe: fix imu leak]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Provide new operations for the user to request mapping an active request
to an io uring instance's buf_table. The user has to provide the index
it wants to install the buffer.
A reference count is taken on the request to ensure it can't be
completed while it is active in a ring's buf_table.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20250227223916.143006-6-kbusch@meta.com
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Provide an interface for the kernel to leverage the existing
pre-registered buffers that io_uring provides. User space can reference
these later to achieve zero-copy IO.
User space must register an empty fixed buffer table with io_uring in
order for the kernel to make use of it.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20250227223916.143006-5-kbusch@meta.com
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When using kernel registered bvec fixed buffers, the "address" is
actually the offset into the bvec rather than userspace address.
Therefore it can be 0.
We can skip checking whether the address is NULL before mapping
uring_cmd data. Bad userspace address will be handled properly later when
the user buffer is imported.
With this patch, we will be able to use the kernel registered bvec fixed
buffers in io_uring NVMe passthru with ublk zero-copy support.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Xinyu Zhang <xizhang@purestorage.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20250227223916.143006-4-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Registered buffers may depend on a linked command, which makes the prep
path too early to import. Move to the issue path when the node is
actually needed like all the other users of fixed buffers.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20250227223916.143006-3-kbusch@meta.com
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Cleans up the generic rw prep to not require the do_import flag. Use a
different prep function for callers that might need buffer select.
Based-on-a-patch-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20250227223916.143006-2-kbusch@meta.com
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>