This patch adds support for Presonus Studio 1824c, a usb interface
that's UAC2 compliant and it is enabled by identifying the device
ID 194f:010d and works with the code brought in by the 1810c change from
Nick Kossifidis in 2020-02-15.
More infos on the card:
https://www.presonus.com/products/Studio-1824c
Signed-off-by: Amin Dandache <amin.dandache@gmail.com>
Link: https://patch.msgid.link/20250227133027.21148-1-git@amin85.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add support to allow retrying the sending of MMIO requests
from the VF to the GUC in the event of an error. During the
suspend/resume process, VFs begin resuming only after the PF has
resumed. Although the PF resumes, the GUC reset and provisioning
occur later in a separate worker process.
When there are a large number of VFs, some may attempt to resume
before the PF has completed its provisioning. Therefore, if a
MMIO request from a VF fails during this period, we will retry
sending the request up to GUC_RESET_VF_STATE_RETRY_MAX times,
which is set to a maximum of 10 attempts.
Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Cc: Michał Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Piotr Piorkowski <piotr.piorkowski@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250224102807.11065-3-satyanarayana.k.v.p@intel.com
When both PF and VF devices are enabled on the host, they
resume simultaneously during system resume.
However, the PF must finish provisioning the VF before any
VFs can successfully resume.
Establish a parent-child device link between the PF and VF
devices to ensure the correct order of resumption.
V4 -> V5:
- Added missing break in the error condition.
V3 -> V4:
- Made xe_pci_pf_get_vf_dev() as a static function and updated
input parameter types.
- Updated xe_sriov_warn() to xe_sriov_abort() when VF device
cannot be found.
V2 -> V3:
- Added function documentation for xe_pci_pf_get_vf_dev().
- Added assertion if not called from PF.
V1 -> V2:
- Added a helper function to get VF pci_dev.
- Updated xe_sriov_notice() to xe_sriov_warn() if vf pci_dev
is not found.
Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Cc: Michał Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Piotr Piorkowski <piotr.piorkowski@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250224102807.11065-2-satyanarayana.k.v.p@intel.com
st1202_dt_init() calls devm_led_classdev_register_ext() before the
internal data structures are properly set up, so the LEDs become visible
to user space while being partially initialized, leading to a window
where trying to access them causes a NULL pointer access.
Move devm_led_classdev_register_ext() from DT initialization
to the end of the probe function when DT and hardware are fully
initialized and ready to interact with user space.
Fixes: 259230378c ("leds: Add LED1202 I2C driver")
Signed-off-by: Manuel Fombuena <fombuena@outlook.com>
Link: https://lore.kernel.org/r/CWLP123MB54732771AC0CE5491B3C84DCC5C32@CWLP123MB5473.GBRP123.PROD.OUTLOOK.COM
Signed-off-by: Lee Jones <lee@kernel.org>
Minimum version of binutils required to compile the kernel is 2.25.
This version correctly handles the "lock" prefix, so it is possible
to remove the semicolon, which was used to support ancient versions
of GNU as.
Due to the semicolon, the compiler considers "lock; insn" as two
separate instructions. Removing the semicolon makes asm length
calculations more accurate, consequently making scheduling and
inlining decisions of the compiler more accurate.
Removing the semicolon also enables assembler checks involving lock
prefix. Trying to assemble e.g. "lock andl %eax, %ebx" results in:
Error: expecting lockable instruction after `lock'
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250228085149.2478245-1-ubizjak@gmail.com
Tariq Toukan says:
====================
mlx5: Trust lockdown health syndrome
This series introduces a new error type in the health syndrome,
specifically for trust lock-down. Additionally, it exposes the CRR bit
in the health buffer, which, when set, indicates that the error cannot
be recovered without a process involving a cold reset. We add The CRR
bit value to the health buffer info log and update it to be logged on
any syndrome.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the new health syndrome value to hsynd_str() function
to indicate that the device got a trust lockdown fault.
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Expose crr bit in struct health buffer. When set, it indicates that
the error cannot be recovered without flow involving a cold reset.
Add its value to the health buffer info log.
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently health buffer data is logged either when FW fatal error
detected or miss counter reached max misses threshold.
Log health buffer whenever new health syndrome is detected.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Shahar Shitrit <shshitrit@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case health counter has not increased for few polling intervals, miss
counter will reach max misses threshold and health report will be
triggered for FW health reporter. In case syndrome found on same health
poll another health report will be triggered.
Avoid two health reports on same syndrome by marking this syndrome as
already known.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Shahar Shitrit <shshitrit@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The board was made by Calao, not by Atmel.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20250226084938.3436-9-wsa+renesas@sang-engineering.com
[claudiu.beznea: replaced at91 w/ microchip in commit title]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
The Olimex board exists with only one SoC option. Change the bindings to
reflect that.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250226084938.3436-7-wsa+renesas@sang-engineering.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
While looking at the X1E PDC GPIO interrupts it became clear that we're
lacking a convenient and accessible way to validate if the TLMM
interrupt code performing as expected.
This introduces a kunit-based "hack" that relies on pin bias/pull
configuration to tickle the interrupt logic in non-connected pins to
allow us to evaluate that an expected number of interrupts are
delivered.
The bias/pull configuration is done with mmio accesses directly from the
test code, to avoid having to programmatically acquire and drive the
pinconf interface for the test pin. This limits the scalability of the
code to targets with a particular register layout, but serves our needs
for now.
The pin to be used for testing is specified by the tester using the
"tlmm-test.gpio" module parameter.
Worth mentioning is that some of the test cases currently fails for
GPIOs that is not backed by PDC (i.e. "non-wakeup" GPIOs), as lingering
latched interrupt state is being delivered at IRQ request time.
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Link: https://lore.kernel.org/20250227-tlmm-test-v1-1-d18877b4a5db@oss.qualcomm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The SFIO/GPIO select bit is a crucial part of Tegra's pin multiplexing
system:
- When set to 1, the pin operates in SFIO mode, controlled by the
pin's assigned special function.
- When set to 0, the pin operates as a general-purpose GPIO.
This SFIO/GPIO select bit that is set for a given pin is not displayed,
adding the support to retrieve this information from the
pinmux set for each pin.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Link: https://lore.kernel.org/20241217153249.5712-1-pshete@nvidia.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The rb_tree helper functions can be reused for parsing `owner_lock_stat`
into rb tree for sorting.
Signed-off-by: Chun-Tse Shao <ctshao@google.com>
Tested-by: Athira Rajeev <atrajeev@linux.ibm.com>
Link: https://lore.kernel.org/r/20250227003359.732948-4-ctshao@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
This implements per-callstack aggregation of lock owners in addition to
per-thread. The owner callstack is captured using `bpf_get_task_stack()`
at `contention_begin()` and it also adds a custom stackid function for the
owner stacks to be compared easily.
The owner info is kept in a hash map using lock addr as a key to handle
multiple waiters for the same lock. At `contention_end()`, it updates the
owner lock stat based on the info that was saved at `contention_begin()`.
If there are more waiters, it'd update the owner pid to itself as
`contention_end()` means it gets the lock now. But it also needs to check
the return value of the lock function in case task was killed by a signal
or something.
Signed-off-by: Chun-Tse Shao <ctshao@google.com>
Tested-by: Athira Rajeev <atrajeev@linux.ibm.com>
Link: https://lore.kernel.org/r/20250227003359.732948-3-ctshao@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add a struct and few bpf maps in order to tracing owner stack.
`struct owner_tracing_data`: Contains owner's pid, stack id, timestamp for
when the owner acquires lock, and the count of lock waiters.
`stack_buf`: Percpu buffer for retrieving owner stacktrace.
`owner_stacks`: For tracing owner stacktrace to customized owner stack id.
`owner_data`: For tracing lock_address to `struct owner_tracing_data` in
bpf program.
`owner_stat`: For reporting owner stacktrace in usermode.
Signed-off-by: Chun-Tse Shao <ctshao@google.com>
Tested-by: Athira Rajeev <atrajeev@linux.ibm.com>
Link: https://lore.kernel.org/r/20250227003359.732948-2-ctshao@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Use the new PWM controller binding which now relies on passing all
clock inputs available on the SoC (instead of passing the "wanted"
clock input for a given board).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241227212514.1376682-6-martin.blumenstingl@googlemail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Use the new PWM controller binding which now relies on passing all
clock inputs available on the SoC (instead of passing the "wanted"
clock input for a given board).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241227212514.1376682-5-martin.blumenstingl@googlemail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Use the new PWM controller binding which now relies on passing all
clock inputs available on the SoC (instead of passing the "wanted"
clock input for a given board).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241227212514.1376682-4-martin.blumenstingl@googlemail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Use the new PWM controller binding which now relies on passing all
clock inputs available on the SoC (instead of passing the "wanted"
clock input for a given board).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241227212514.1376682-3-martin.blumenstingl@googlemail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Use the new PWM controller binding which now relies on passing all
clock inputs available on the SoC (instead of passing the "wanted"
clock input for a given board).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241227212514.1376682-2-martin.blumenstingl@googlemail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
hgsmi_cursor_position() has been unused since 2018's
commit 35f3288c45 ("staging: vboxvideo: Atomic phase 1: convert cursor to
universal plane")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20241215220014.452537-1-linux@treblig.org
Avoid compiler warnings when building with W=1 by adding documentation for
the missing function parameters.
Signed-off-by: Helge Deller <deller@gmx.de>
Though struct miscdevice has hardly changed over the years, this is good
practice and also makes the core more readable.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Helge Deller <deller@gmx.de>
As reported by the kernel test robot, the following error occurs:
arch/parisc/kernel/pdt.c:65:6: warning: no previous prototype for 'arch_report_meminfo' [-Wmissing-prototypes]
65 | void arch_report_meminfo(struct seq_file *m)
| ^~~~~~~~~~~~~~~~~~~
arch_report_meminfo() is declared in include/linux/proc_fs.h and only
defined when CONFIG_PROC_FS is enabled. Wrap its definition in #ifdef
CONFIG_PROC_FS to fix the -Wmissing-prototypes warning.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202502082315.IPaHaTyM-lkp@intel.com/
Signed-off-by: Yu-Chun Lin <eleanor15x@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
amdgpu:
- Legacy dpm suspend/resume fix
- Runtime PM fix for DELL G5 SE
- MAINTAINERS updates
- Enforce Isolation fixes
- mailmap update
- EDID reading i2c fix
- PSR fix
- eDP fix
- HPD interrupt handling fix
- Clear memory fix
amdkfd:
- MQD handling fix
vkms:
- fix rounding error
imagination:
- header fix
nouveau:
- connector status fix
fb/defio:
- NULL ptr fix for defio drivers
i915:
- Fix encoder HW state readout for DP UHBR MST
xe:
- OA uapi fix (Umesh)
- Userptr related fixes
- Remove a duplicated register entry
- Scheduler related fix to prevent exec races when freeing it
-----BEGIN PGP SIGNATURE-----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=pUly
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2025-02-28' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"This week's fixes pull, amdgpu mostly, with some xe and a few misc
others, the fb defio fix is bit of a change, but it avoids some nasty
NULL pointer crashes due to defio assuming page backing in places it
didn't have pages.
amdgpu:
- Legacy dpm suspend/resume fix
- Runtime PM fix for DELL G5 SE
- MAINTAINERS updates
- Enforce Isolation fixes
- mailmap update
- EDID reading i2c fix
- PSR fix
- eDP fix
- HPD interrupt handling fix
- Clear memory fix
amdkfd:
- MQD handling fix
vkms:
- fix rounding error
imagination:
- header fix
nouveau:
- connector status fix
fb/defio:
- NULL ptr fix for defio drivers
i915:
- Fix encoder HW state readout for DP UHBR MST
xe:
- OA uapi fix (Umesh)
- Userptr related fixes
- Remove a duplicated register entry
- Scheduler related fix to prevent exec races when freeing it"
* tag 'drm-fixes-2025-02-28' of https://gitlab.freedesktop.org/drm/kernel: (25 commits)
drm/fbdev-dma: Add shadow buffering for deferred I/O
drm/nouveau: Do not override forced connector status
drm/i915/dp_mst: Fix encoder HW state readout for UHBR MST
drm/xe: cancel pending job timer before freeing scheduler
drm/xe/regs: remove a duplicate definition for RING_CTL_SIZE(size)
drm/imagination: remove unnecessary header include path
drm/amdgpu: init return value in amdgpu_ttm_clear_buffer
drm/amd/display: Fix HPD after gpu reset
drm/amd/display: add a quirk to enable eDP0 on DP1
drm/amd/display: Disable PSR-SU on eDP panels
MAINTAINERS: Update AMDGPU DML maintainers info
drm/amd/display: restore edid reading from a given i2c adapter
mailmap: Add entry for Rodrigo Siqueira
MAINTAINERS: Change my role from Maintainer to Reviewer
drm/amdgpu/mes: keep enforce isolation up to date
drm/amdgpu/gfx: only call mes for enforce isolation if supported
MAINTAINERS: update amdgpu maintainers list
drm/amdgpu: disable BAR resize on Dell G5 SE
drm/amdkfd: Preserve cp_hqd_pq_control on update_mqd
amdgpu/pm/legacy: fix suspend/resume issues
...
GRO tests are timing dependent and can easily flake. This is partially
mitigated in gro.sh by giving each subtest 3 chances to pass. However,
this still flakes on some machines. Reduce the flakiness by:
- Bumping retries to 6.
- Setting napi_defer_hard_irqs to 1 to reduce the chance that GRO is
flushed prematurely. This also lets us reduce the gro_flush_timeout
from 1ms to 100us.
Tested: Ran `gro.sh -t large` 1000 times. There were no failures with
this change. Ran inside strace to increase flakiness.
Signed-off-by: Kevin Krakauer <krakauer@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250226192725.621969-4-krakauer@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
gro.c:main no longer erroneously claims a test passes when running as a
sender.
Tested: Ran `gro.sh -t large` to verify the sender no longer prints a
status.
Signed-off-by: Kevin Krakauer <krakauer@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250226192725.621969-3-krakauer@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Modify gro.sh to return a useful exit code when the -t flag is used. It
formerly returned 0 no matter what.
Tested: Ran `gro.sh -t large` and verified that test failures return 1.
Signed-off-by: Kevin Krakauer <krakauer@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250226192725.621969-2-krakauer@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pcim_iomap_regions() should receive the driver's name as its third
parameter, not the PCI device's name.
Define the driver name with a macro and use it at the appropriate
places, including pcim_iomap_regions().
Cc: stable@vger.kernel.org # v5.14+
Fixes: 30bba69d7d ("stmmac: pci: Add dwmac support for Loongson")
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Tested-by: Henry Chen <chenx97@aosc.io>
Link: https://patch.msgid.link/20250226085208.97891-2-phasta@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The order in which queue->cmd and rcv_state are updated is crucial.
If these assignments are reordered by the compiler, the worker might not
get queued in nvmet_tcp_queue_response(), hanging the IO. to enforce the
the correct reordering, set rcv_state using smp_store_release().
Fixes: bdaf132791 ("nvmet-tcp: fix a segmentation fault during io parsing error")
Signed-off-by: Meir Elisha <meir.elisha@volumez.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
nvme_tcp_recv_pdu() doesn't check the validity of the header length.
When header digests are enabled, a target might send a packet with an
invalid header length (e.g. 255), causing nvme_tcp_verify_hdgst()
to access memory outside the allocated area and cause memory corruptions
by overwriting it with the calculated digest.
Fix this by rejecting packets with an unexpected header length.
Fixes: 3f2304f8c6 ("nvme-tcp: add NVMe over TCP host driver")
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Gal Pressman says:
====================
Add missing netlink error message macros to coccinelle test
The newline_in_nl_msg.cocci test is missing some variants in the list of
checked macros, add them and fix all reported issues.
====================
Link: https://patch.msgid.link/20250226093904.6632-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Netlink error messages should not have a newline at the end of the
string.
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Acked-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250226093904.6632-6-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Netlink error messages should not have a newline at the end of the
string.
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250226093904.6632-5-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Netlink error messages should not have a newline at the end of the
string.
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250226093904.6632-4-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Netlink error messages should not have a newline at the end of the
string.
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250226093904.6632-3-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add missing (GE)NL_SET_ERR_MSG_*() variants to the list of macros
checked for strings ending with a newline.
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250226093904.6632-2-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It's really hard to know if a faux device properly passes the callback
to probe() without having to poke around in the faux_device structure
and then clean up. Instead of having to have every user of the api do
this logic, just do it in the faux device core itself.
This makes the use of a custom probe() callback for a faux device much
simpler overall.
Suggested-by: Kurt Borja <kuurtb@gmail.com>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/2025022545-unroasted-common-fa0e@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A little late in the review of the faux device interface, we added the
ability to specify a parent device when creating new faux devices - but
this never got ported over to the rust bindings. So, let's add the missing
argument now so we don't have to convert other users later down the line.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250227193522.198344-1-lyude@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I think this change got missed during review, we don't need
#[repr(transparent)] since Registration just holds a single NonNull. This
attribute had originally been added by me when I was still figuring out how
the bindings should look like but got committed by mistake. So, just drop
it.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Fiona Behrens <me@Kloenk.dev>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250225213112.872264-2-lyude@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>