The only caller to io_buffer_unmap already checks if the node's buf is
not null, so no need to check again.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250224213116.3509093-2-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The 'msk' variable has no initialization:
sound/soc/mediatek/mt8188/mt8188-dai-dmic.c:311:4: error: variable 'msk' is uninitialized when used here [-Werror,-Wuninitialized]
311 | msk |= PWR2_TOP_CON1_DMIC_FIFO_SOFT_RST_EN(i);
| ^~~
Set it to zero before the loop.
Fixes: c1e42ec041 ("ASoC: mediatek: mt8188: Add support for DMIC")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://patch.msgid.link/20250227131939.1040168-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When the drm-driver probes, it mainly creates the component device, where
all the sub-drivers (vops, hdmi, etc) hook into.
This will cause the shutdown handler to get called on shutdown, even
though the drm-device might not have been set up, or the component bind
might have failed.
So use the new component helper to check whether the drm-device is up
and only then call the drm-atomic helper to release all the drm magic.
This prevents failures when the drm-device is never set, or has been
freed up already for example by a probe-defer during the component bind.
Reviewed-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250220234141.2788785-3-heiko@sntech.de
The component helpers already expose the bound status in debugfs, but at
times it might be necessary to also check that state in the kernel and
act differently depending on the result.
For example the shutdown handler of a drm-driver might need to stop
a whole output pipeline if the drm device is up and running, but may
run into problems if that drm-device has never been set up before,
for example because the binding deferred.
So add a little helper that returns the bound status for a componet
device.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250220234141.2788785-2-heiko@sntech.de
Enable the only HDMI output port on the Orange Pi 5 Ultra
Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com>
Tested-By: Johannes Erdfelt <johannes@erdfelt.com>
Link: https://lore.kernel.org/r/20250222193332.1761-5-honyuenkwun@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The RK3588 Single Board Computer includes
- eMMC
- microSD
- UART
- 2 PWM LEDs
- RTC
- RTL8125 network controller on PCIe 2.0x1.
- M.2 M-key connector routed to PCIe 3.0x4
- PWM controlled heat sink fan.
- 2 USB2 ports
- lower USB3 port
- upper USB3 port with OTG capability
- Mali GPU
- SPI NOR flash
- Mask Rom button
- Analog audio using es8388 codec via the headset jack and onboard mic
- HDMI1
- HDMI IN
the vcc5v0_usb30 regulator shares the same enable gpio pin as the
vcc5v0_usb20 regulator.
The Orange Pi 5 Ultra is a single board computer powered by the Rockchip
RK3588 with similar board layout as the 5 Max but with the HDMI0 swapped
for HDMI IN.
Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com>
Tested-By: Johannes Erdfelt <johannes@erdfelt.com>
Link: https://lore.kernel.org/r/20250222193332.1761-4-honyuenkwun@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add devicetree binding for the Xunlong Orange Pi 5 Ultra board.
The Orange Pi 5 Ultra is a single board computer powered by the Rockchip
RK3588 with similar board layout as the 5 Max but with the HDMI0 swapped
for HDMI IN.
Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com>
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250222193332.1761-3-honyuenkwun@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Orange Pi 5 Plus and Orange Pi 5 Max have 2SK3018s attached to the
PWM LEDs. The Orange Pi 5 Ultra does not, and thus needs the PWM
polarity inverted.
Also remove the model/compatible from the dtsi. It should be at the
board level only.
Fixes: c600d252dc ("arm64: dts: rockchip: Add Orange Pi 5 Max board")
Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com>
Link: https://lore.kernel.org/r/20250222193332.1761-2-honyuenkwun@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
mtk_foe_entry_set_vlan() in mtk_ppe.c already supports double vlan
tagging, but mtk_flow_offload_replace() in mtk_ppe_offload.c only allows
for 1 vlan tag, optionally in combination with pppoe and dsa tags.
However, mtk_foe_entry_set_vlan() only allows for setting the vlan id.
The protocol cannot be set, it is always ETH_P_8021Q, for inner and outer
tag. This patch adds QinQ support to mtk_flow_offload_replace(), only in
the case that both inner and outer tags are ETH_P_8021Q.
Only PPPoE-in-Q (as before) and Q-in-Q are allowed. A combination
of PPPoE and Q-in-Q is not allowed.
Signed-off-by: Eric Woudstra <ericwouds@gmail.com>
Link: https://patch.msgid.link/20250225201509.20843-1-ericwouds@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
UART5 uses GPIO0_B5 as UART RTS but muxed in its GPIO function,
therefore UART5 must request this pin to be muxed in that function, so
let's do that.
Fixes: 5963d97aa7 ("arm64: dts: rockchip: add rs485 support on uart5 of px30-ringneck-haikou")
Cc: stable@vger.kernel.org
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250225-ringneck-dtbos-v3-2-853a9a6dd597@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
UART0 pinmux by default configures GPIO0_B5 in its UART RTS function for
UART0. However, by default on Haikou, it is used as GPIO as UART RTS for
UART5.
Therefore, let's update UART0 pinmux to not configure the pin in that
mode, a later commit will make UART5 request the GPIO pinmux.
Fixes: c484cf93f6 ("arm64: dts: rockchip: add PX30-µQ7 (Ringneck) SoM with Haikou baseboard")
Cc: stable@vger.kernel.org
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250225-ringneck-dtbos-v3-1-853a9a6dd597@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The u2phy1_host should always have the same status as usb_host1_ehci
and usb_host1_ohci, otherwise the EHCI and OHCI drivers may be
initialized for a disabled usb port.
Per the NanoPi R4S schematic, the phy-supply for u2phy1_host is set to
the vdd_5v regulator.
Fixes: db792e9adb ("rockchip: rk3399: Add support for FriendlyARM NanoPi R4S")
Cc: stable@vger.kernel.org
Signed-off-by: Justin Klaassen <justin@tidylabs.net>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20250225170420.3898-1-justin@tidylabs.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The concept of an SDCA default value differs slightly from the regmap
usage of the term. An SDCA default is a value that is parsed from DisCo
and then written out to the hardware if no user value has superceded
it. Add a helper function that will iterate through all the SDCA
Controls and write out any default values. After these have been written
out once they will exist in the cache and that will take care of any
user values superceeding them. The code here also writes out any
Controls with a fixed value as there is only one available value for
these Controls there is no point in allowing the user to select them,
simply treat them similarly to a default.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250217140159.2288784-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add helpers to parse the DisCo Constant values from ACPI and populate an
array of reg_defaults with these. This will allow drivers to access
these ACPI specified values through the same interface as other
registers that are physically present on the device, using the regmap
cache.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250217140159.2288784-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add helper functions that SDCA drivers can use to calculate the
properties of SDCA Controls (registers) specified through DisCo.
Most of these are fairly obvious from the SDCA Access Modes.
DisCo Constants, values which are specified in the ACPI rather than on
the device, are handled as unreadable and unwritable registers. The
intention is these will be populated in the register defaults table
allowing drivers to read them normally. This means the drivers can be
agnostic as to which values are DisCo Constants.
Finally, support for SDCA Dual Ranked Controls is currently limited
here, at the moment the current value will be used directly. Writing
the current value directly is valid as per the specification
although the synchronicity of updates across multiple registers is
lost. Support for this will probably need to be added later. But its a
fairly hard problem and doesn't need to be solved immediately.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250217140159.2288784-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The defaults array in regcache must be sorted into ascending register
address order, because binary search is used to locate values in
the array. Add a helper to sort the register defaults array which
can be useful for systems that dynamically create a defaults array
based on external information.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250217140159.2288784-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Alexander Lobakin says:
====================
bpf: cpumap: enable GRO for XDP_PASS frames
Several months ago, I had been looking through my old XDP hints tree[0]
to check whether some patches not directly related to hints can be sent
standalone. Roughly at the same time, Daniel appeared and asked[1] about
GRO for cpumap from that tree.
Currently, cpumap uses its own kthread which processes cpumap-redirected
frames by batches of 8, without any weighting (but with rescheduling
points). The resulting skbs get passed to the stack via
netif_receive_skb_list(), which means no GRO happens.
Even though we can't currently pass checksum status from the drivers,
in many cases GRO performs better than the listified Rx without the
aggregation, confirmed by tests.
In order to enable GRO in cpumap, we need to do the following:
* patches 1-2: decouple the GRO struct from the NAPI struct and allow
using it out of a NAPI entity within the kernel core code;
* patch 3: switch cpumap from netif_receive_skb_list() to
gro_receive_skb().
Additional improvements:
* patch 4: optimize XDP_PASS in cpumap by using arrays instead of linked
lists;
* patch 5-6: introduce and use function do get skbs from the NAPI percpu
caches by bulks, not one at a time;
* patch 7-8: use that function in veth as well and remove the one that
was now superseded by it.
My trafficgen UDP GRO tests, small frame sizes:
GRO off GRO on
baseline 2.7 N/A Mpps
patch 3 2.3 4 Mpps
patch 8 2.4 4.7 Mpps
1...3 diff -17 +48 %
1...8 diff -11 +74 %
Daniel reported from +14%[2] to +18%[3] of throughput in neper's TCP RR
tests. On my system however, the same test gave me up to +100%.
Note that there's a series from Lorenzo[4] which achieves the same, but
in a different way. During the discussions, the approach using a
standalone GRO instance was preferred over the threaded NAPI.
[0] https://github.com/alobakin/linux/tree/xdp_hints
[1] https://lore.kernel.org/bpf/cadda351-6e93-4568-ba26-21a760bf9a57@app.fastmail.com
[2] https://lore.kernel.org/bpf/merfatcdvwpx2lj4j2pahhwp4vihstpidws3jwljwazhh76xkd@t5vsh4gvk4mh
[3] https://lore.kernel.org/bpf/yzda66wro5twmzpmjoxvy4si5zvkehlmgtpi6brheek3sj73tj@o7kd6nurr3o6
[4] https://lore.kernel.org/bpf/20241130-cpumap-gro-v1-0-c1180b1b5758@kernel.org
====================
Link: https://patch.msgid.link/20250225171751.2268401-1-aleksander.lobakin@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The only user was veth, which now uses napi_skb_cache_get_bulk().
It's now preferred over a direct allocation and is exported as
well, so remove this one.
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Now that we can bulk-allocate skbs from the NAPI cache, use that
function to do that in veth as well instead of direct allocation from
the kmem caches. veth uses NAPI and GRO, so this is both context-safe
and beneficial.
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Now that cpumap uses GRO, which drops unused skb heads to the NAPI
cache, use napi_skb_cache_get_bulk() to try to reuse cached entries
and lower MM layer pressure. Always disable the BH before checking and
running the cpumap-pinned XDP prog and don't re-enable it in between
that and allocating an skb bulk, as we can access the NAPI caches only
from the BH context.
The better GRO aggregates packets, the less new skbs will be allocated.
If an aggregated skb contains 16 frags, this means 15 skbs were returned
to the cache, so next 15 skbs will be built without allocating anything.
The same trafficgen UDP GRO test now shows:
GRO off GRO on
threaded GRO 2.3 4 Mpps
thr bulk GRO 2.4 4.7 Mpps
diff +4 +17 %
Comparing to the baseline cpumap:
baseline 2.7 N/A Mpps
thr bulk GRO 2.4 4.7 Mpps
diff -11 +74 %
Tested-by: Daniel Xu <dxu@dxuuu.xyz>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a function to get an array of skbs from the NAPI percpu cache.
It's supposed to be a drop-in replacement for
kmem_cache_alloc_bulk(skbuff_head_cache, GFP_ATOMIC) and
xdp_alloc_skb_bulk(GFP_ATOMIC). The difference (apart from the
requirement to call it only from the BH) is that it tries to use
as many NAPI cache entries for skbs as possible, and allocate new
ones only if needed.
The logic is as follows:
* there is enough skbs in the cache: decache them and return to the
caller;
* not enough: try refilling the cache first. If there is now enough
skbs, return;
* still not enough: try allocating skbs directly to the output array
with %GFP_ZERO, maybe we'll be able to get some. If there's now
enough, return;
* still not enough: return as many as we were able to obtain.
Most of times, if called from the NAPI polling loop, the first one will
be true, sometimes (rarely) the second one. The third and the fourth --
only under heavy memory pressure.
It can save significant amounts of CPU cycles if there are GRO cycles
and/or Tx completion cycles (anything that descends to
napi_skb_cache_put()) happening on this CPU.
Tested-by: Daniel Xu <dxu@dxuuu.xyz>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
cpumap still uses linked lists to store a list of skbs to pass to the
stack. Now that we don't use listified Rx in favor of
napi_gro_receive(), linked list is now an unneeded overhead.
Inside the polling loop, we already have an array of skbs. Let's reuse
it for skbs passed to cpumap (generic XDP) and keep there in case of
XDP_PASS when a program is installed to the map itself. Don't list
regular xdp_frames after converting them to skbs as well; store them
in the mentioned array (but *before* generic skbs as the latters have
lower priority) and call gro_receive_skb() for each array element after
they're done.
Tested-by: Daniel Xu <dxu@dxuuu.xyz>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
cpumap has its own BH context based on kthread. It has a sane batch
size of 8 frames per one cycle.
GRO can be used here on its own. Adjust cpumap calls to the upper stack
to use GRO API instead of netif_receive_skb_list() which processes skbs
by batches, but doesn't involve GRO layer at all.
In plenty of tests, GRO performs better than listed receiving even
given that it has to calculate full frame checksums on the CPU.
As GRO passes the skbs to the upper stack in the batches of
@gro_normal_batch, i.e. 8 by default, and skb->dev points to the
device where the frame comes from, it is enough to disable GRO
netdev feature on it to completely restore the original behaviour:
untouched frames will be being bulked and passed to the upper stack
by 8, as it was with netif_receive_skb_list().
Tested-by: Daniel Xu <dxu@dxuuu.xyz>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Make GRO init and cleanup functions global to be able to use GRO
without a NAPI instance. Taking into account already global gro_flush(),
it's now fully usable standalone.
New functions are not exported, since they're not supposed to be used
outside of the kernel core code.
Tested-by: Daniel Xu <dxu@dxuuu.xyz>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In fact, these two are not tied closely to each other. The only
requirements to GRO are to use it in the BH context and have some
sane limits on the packet batches, e.g. NAPI has a limit of its
budget (64/8/etc.).
Move purely GRO fields into a new structure, &gro_node. Embed it
into &napi_struct and adjust all the references.
gro_node::cached_napi_id is effectively the same as
napi_struct::napi_id, but to be used on GRO hotpath to mark skbs.
napi_struct::napi_id is now a fully control path field.
Three Ethernet drivers use napi_gro_flush() not really meant to be
exported, so move it to <net/gro.h> and add that include there.
napi_gro_receive() is used in more than 100 drivers, keep it
in <linux/netdevice.h>.
This does not make GRO ready to use outside of the NAPI context
yet.
Tested-by: Daniel Xu <dxu@dxuuu.xyz>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Refactor parity calculations to use the standard parity8() helper. This
change eliminates redundant implementations and improves code
efficiency.
[ ubizjak: Updated the patch to apply to the latest x86 tree. ]
Co-developed-by: Yu-Chun Lin <eleanor15x@gmail.com>
Signed-off-by: Yu-Chun Lin <eleanor15x@gmail.com>
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lore.kernel.org/r/20250227125616.2253774-1-ubizjak@gmail.com
Building with W=1 shows a warning about xge_acpi_match being unused when
CONFIG_ACPI is disabled:
drivers/net/ethernet/apm/xgene-v2/main.c:723:36: error: unused variable 'xge_acpi_match' [-Werror,-Wunused-const-variable]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20250225163341.4168238-2-arnd@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Building with W=1 shows a warning about hns_mdio_acpi_match being unused when
CONFIG_ACPI is disabled:
drivers/net/ethernet/hisilicon/hns_mdio.c:631:36: error: unused variable 'hns_mdio_acpi_match' [-Werror,-Wunused-const-variable]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20250225163341.4168238-1-arnd@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Because calls to get_this_hybrid_cpu_type() and
get_this_hybrid_cpu_native_id() are not required now. cpu-type and
native-model-id are cached at boot in per-cpu struct cpuinfo_topology.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20241211-add-cpu-type-v5-4-2ae010f50370@linux.intel.com
get_this_hybrid_cpu_type() misses a case when cpu-type is populated
regardless of X86_FEATURE_HYBRID_CPU. This is particularly true for hybrid
variants that have P or E cores fused off.
Instead use the cpu-type cached in struct x86_topology, as it does not rely
on hybrid feature to enumerate cpu-type. This can also help avoid the
model-specific fixup get_hybrid_cpu_type(). Also replace the
get_this_hybrid_cpu_native_id() with its cached value in struct
x86_topology.
While at it, remove enum hybrid_cpu_type as it serves no purpose when we
have the exact cpu-types defined in enum intel_cpu_type. Also rename
atom_native_id to intel_native_id and move it to intel-family.h where
intel_cpu_type lives.
Suggested-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20241211-add-cpu-type-v5-3-2ae010f50370@linux.intel.com
Intel pstate driver relies on SMP calls to get the cpu-type of a given CPU.
Remove the SMP calls and instead use the cached value of cpu-type which is
more efficient.
[ mingo: Forward ported it. ]
Suggested-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20241211-add-cpu-type-v5-2-2ae010f50370@linux.intel.com
The hex values in CPU debug interface are not prefixed with 0x. This may
cause misinterpretation of values. Fix it.
[ mingo: Restore previous vertical alignment of the output. ]
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20241211-add-cpu-type-v5-1-2ae010f50370@linux.intel.com
Older Exynos designs, like Exynos5422, do not have USB Type-C and the
USB DRD PHY does not really need CONFIG_TYPEC for these devices at all.
Incorrectly added optional dependency on CONFIG_TYPEC caused this driver
to be missing for exynos_defconfig and as result Exynos5422-based boards
like Hardkernel Odroid HC1 failed to probe USB.
Reported-by: Krzysztof Kozlowski <krzk@kernel.org>
Closes: https://krzk.eu/#/builders/21/builds/6139
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Closes: https://lore.kernel.org/all/3c0b77e6-357d-453e-8b63-4757c3231bde@samsung.com/
Fixes: 09dc674295 ("phy: exynos5-usbdrd: subscribe to orientation notifier if required")
Reviewed-by: André Draszik <andre.draszik@linaro.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250227070518.5468-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
HDMI audio is available on the Rock 5B HDMI TX ports.
Enable it for both ports.
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Fixes: 419d191810 ("ASoC: simple-card-utils: use __free(device_node) for device node")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20250217215641.372723-4-detlev.casanova@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
For hdmi0_sound, use the simple-audio-card driver with the hdmi0 QP node
as CODEC and the i2s5 device as CPU.
Similarly for hdmi1_sound, the CODEC is the hdmi1 node and the CPU is
i2s6, but only added in the rk3588-extra.dtsi device tree as the second
TX HDMI port is not available on base versions of the SoC.
The simple-audio-card,mclk-fs value is set to 128 as it is done in
the downstream driver.
The #sound-dai-cells value is set to 0 in the hdmi0 and hdmi1 nodes so
that they can be used as audio codec nodes.
Tested-by: Quentin Schulz <quentin.schulz@cherry.de> # RK3588 Tiger Haikou
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Fixes: 419d191810 ("ASoC: simple-card-utils: use __free(device_node) for device node")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20250217215641.372723-3-detlev.casanova@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add the necessary DT changes to enable the second HDMI output port on
Rockchip RK3588 EVB1.
While at it, switch the position of &vop_mmu and @vop to maintain the
alphabetical order.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20250223-vop2-hdmi1-disp-modes-v2-5-f4cec5e06fbe@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
VOP2 on RK3588 is able to use the HDMI PHY PLL as an alternative and
more accurate pixel clock source to improve handling of display modes up
to 4K@60Hz on video ports 0, 1 and 2.
The HDMI1 PHY PLL clock source cannot be added directly to vop node in
rk3588-base.dtsi, along with the HDMI0 related one, because HDMI1 is an
optional feature and its PHY node belongs to a separate (extra) DT file.
Therefore, add the HDMI1 PHY PLL clock source to VOP2 by overwriting its
clocks & clock-names properties in the extra DT file.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20250223-vop2-hdmi1-disp-modes-v2-4-f4cec5e06fbe@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Since commit c4b09c5620 ("phy: phy-rockchip-samsung-hdptx: Add clock
provider support"), the HDMI PHY PLL can be used as an alternative and
more accurate pixel clock source for VOP2 to improve display modes
handling on RK3588 SoC.
Add the missing #clock-cells property to allow using the clock provider
functionality of HDMI1 PHY.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20250223-vop2-hdmi1-disp-modes-v2-3-f4cec5e06fbe@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
When extra warnings are enable, there are configurations that build
pktgen without CONFIG_XFRM, which leaves a static const variable unused:
net/core/pktgen.c:213:1: error: unused variable 'F_IPSEC' [-Werror,-Wunused-const-variable]
213 | PKT_FLAGS
| ^~~~~~~~~
net/core/pktgen.c:197:2: note: expanded from macro 'PKT_FLAGS'
197 | pf(IPSEC) /* ipsec on for flows */ \
| ^~~~~~~~~
This could be marked as __maybe_unused, or by making the one use visible
to the compiler by slightly rearranging the #ifdef blocks. The second
variant looks slightly nicer here, so use that.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Link: https://patch.msgid.link/20250225085722.469868-1-arnd@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We applied a fix for a KASAN issue for snd_pcm_format_set_silence(),
and it introduced a NULL check of pat. But this turned out to be
utterly superfluous; it points to pcm_formats[].silence, and this is
an array, which can be never NULL.
The problem (supposedly) it tried to address at that time was likely
already fixed by another commit 8423f0b6d5 ("ALSA: pcm: oss: Fix
race at SNDCTL_DSP_SYNC") instead.
So let's drop the superfluous NULL check again. While we're at it,
keep the whitespace fix and move the pat assignment after the width
check for a bit better code readability.
Fixes: 2f7a26abb8 ("ALSA: pcm: Test for "silence" field in struct "pcm_format_data"")
Link: https://patch.msgid.link/20250227095150.8187-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>