Luis Chamberlain <mcgrof@kernel.org> says:
This v3 series addresses the feedback from the v2 series [0]. The only
patch which was mofified was the patch titled "fs/mpage: use blocks_per_folio
instead of blocks_per_page". The motivation for this series is to mainly
start supporting block devices with logical block sizes larger than 4k,
we do this by addressing buffer-head support required for the block
device cache.
In the future these changes can be leveraged to also start experimenting
with LBS support for filesystems which support only buffer-heads. This
paves the way for that work.
Its perhaps is surprising to some but since this also lifts the block
device cache sector size support to 64k, devices which support up to
64k sector sizes can also leverage this to enable filesystems created with
larger sector sizes up to 64k sector sizes. The filesystem sector size
is used or documented in a bit of obscurity except for few filesystems,
but in short it ensures that the filesystem itself will not generate
writes iteslef smaller than the specified sector size. In practice this
means you can constrain metadata writes as well to a minimum size, and
so be completely deterministic with regards to the specified sector size
for min IO writes. For example since XFS can supports up to 32k sector size,
it means with these changes enable filesystems to also be created on x86_64
with both the filesystem block size and sector size to 32k, now that the block
device cache limitation is lifted.
Since this touches buffer-heads I've ran this through fstests on ext4
and found no new regressions. I've also used blktests against a kernel
built with these changes to test block devices with different larger logical
block sizes than 4k on x86_64. All changes to be able to test block
devices with a logical block size support > 4k are now merged on
upstream blktests. I've tested the block layer with blktests with block
devices with logical block sizes up to 64k which is the max we are
currently supporting and found no new regressions.
Detailed changes in this series:
- Modifies the commit log for "fs/buffer: remove batching from async
read" as per Willy's request and collects his SOB.
- Collects Reviewed-by tags
- The patch titled "fs/mpage: use blocks_per_folio instead of blocks_per_page"
received more love to account for Willy's point
that we should keep accounting in order for nr_pages on mpage. This
does this by using folio_nr_pages() on the args passed and adjusts
the last_block accounting accordingly.
- Through code inspection fixed folio_zero_segment() use to use
folio_size() as we move to suppor large folios for unmapped
folio segments on do_mpage_readpage(), this is dealt with on the
patch titled "fs/mpage: use blocks_per_folio instead of blocks_per_page"
as that's when we start accounting large folios into the picture.
[0] https://lkml.kernel.org/r/20250204231209.429356-1-mcgrof@kernel.org
* patches from https://lore.kernel.org/r/20250221223823.1680616-1-mcgrof@kernel.org:
bdev: use bdev_io_min() for statx block size
block/bdev: lift block size restrictions to 64k
block/bdev: enable large folio support for large logical block sizes
fs/buffer fs/mpage: remove large folio restriction
fs/mpage: use blocks_per_folio instead of blocks_per_page
fs/mpage: avoid negative shift for large blocksize
fs/buffer: remove batching from async read
fs/buffer: simplify block_read_full_folio() with bh_offset()
Link: https://lore.kernel.org/r/20250221223823.1680616-1-mcgrof@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
We now can support blocksizes larger than PAGE_SIZE, so in theory
we should be able to lift the restriction up to the max supported page
cache order. However bound ourselves to what we can currently validate
and test. Through blktests and fstest we can validate up to 64k today.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20250221223823.1680616-8-mcgrof@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Call mapping_set_folio_min_order() when modifying the logical block
size to ensure folios are allocated with the correct size.
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20250221223823.1680616-7-mcgrof@kernel.org
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Now that buffer-heads has been converted over to support large folios
we can remove the built-in VM_BUG_ON_FOLIO() checks which prevents
their use.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20250221223823.1680616-6-mcgrof@kernel.org
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Convert mpage to folios and adjust accounting for the number of blocks
within a folio instead of a single page. This also adjusts the number
of pages we should process to be the size of the folio to ensure we
always read a full folio.
Note that the page cache code already ensures do_mpage_readpage() will
work with folios respecting the address space min order, this ensures
that so long as folio_size() is used for our requirements mpage will
also now be able to process block sizes larger than the page size.
Originally-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20250221223823.1680616-5-mcgrof@kernel.org
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
For large blocksizes the number of block bits is larger than PAGE_SHIFT,
so calculate the sector number from the byte offset instead. This is
required to enable large folios with buffer-heads.
Reviewed-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Link: https://lore.kernel.org/r/20250221223823.1680616-4-mcgrof@kernel.org
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
block_read_full_folio() currently puts all !uptodate buffers into
an array allocated on the stack, then iterates over it twice, first
locking the buffers and then submitting them for read. We want to
remove this array because it occupies too much stack space on
configurations with a larger PAGE_SIZE (eg 512 bytes with 8 byte
pointers and a 64KiB PAGE_SIZE).
We cannot simply submit buffer heads as we find them as the completion
handler needs to be able to tell when all reads are finished, so it can
end the folio read. So we keep one buffer in reserve (using the 'prev'
variable) until the end of the function.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20250221223823.1680616-3-mcgrof@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
When we read over all buffers in a folio we currently use the
buffer index on the folio and blocksize to get the offset. Simplify
this with bh_offset(). This simplifies the loop while making no
functional changes.
Suggested-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20250221223823.1680616-2-mcgrof@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
The dm-integrity target didn't set the error string when memory
allocation failed. This patch fixes it.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
This is far less efficient for the lagging filesystems which still
use page_offset(), but it removes an access to page->index. It also
fixes a bug -- if any filesystem passed a tail page to page_offset(),
it would return garbage which might result in the filesystem choosing
to not writeback a dirty page. There probably aren't any examples
of this, but I can't be certain.
Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Link: https://lore.kernel.org/r/20250221203932.3588740-1-willy@infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Nsfs only deals with unhashed dentries and there's currently no way for
them to become hashed. So remove d_op->d_delete.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Pidfs only deals with unhashed dentries and there's currently no way for
them to become hashed. So remove d_op->d_delete.
Signed-off-by: Christian Brauner <brauner@kernel.org>
J722S SOC has two usb controllers USB0 and USB1. USB0 is brought out on
the EVM as a stacked USB connector which has one Type-A and one Type-C
port. These Type-A and Type-C ports are connected to MUX so only
one of them can be enabled at a time.
Commit under Fixes, tries to enable the USB0 instance of USB to
interface with the Type-C port via the USB hub, by configuring the
USB2.0_MUX_SEL to GPIO_ACTIVE_HIGH. But it is observed on J722S-EVM
that Type-A port is enabled instead of Type-C port.
Fix this by setting USB2.0_MUX_SEL to GPIO_ACTIVE_LOW to enable Type-C
port.
Fixes: 485705df5d ("arm64: dts: ti: k3-j722s: Enable PCIe and USB support on J722S-EVM")
Signed-off-by: Hrushikesh Salunke <h-salunke@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20250116125726.2549489-1-h-salunke@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
The j784s4-evm board dts now has the gpio hogs for MUX2 after integration
of audio support. Remove duplicate gpio-hogs from the overlay dtso to
prevent mux probe failures leading to can-phy3 deferred probe:
'gpio-mux mux-controller: probe with driver gpio-mux failed with error -16'
Fixes: 479112c9f5 ("arm64: dts: ti: k3-j784s4-evm: Enable analog audio support")
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Link: https://lore.kernel.org/r/20250110105753.223049-1-j-choudhary@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Enable mcu domain pinmux by default to be able to access mcu domain
peripherals from main domain.
This also makes it consistent with the rest of the k3 platforms where
mcu domain pinmux is enabled by default.
Signed-off-by: Sai Sree Kartheek Adivi <s-adivi@ti.com>
Link: https://lore.kernel.org/r/20250120075442.181191-1-s-adivi@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Raag Jadav <raag.jadav@intel.com> says:
This series
1. Splits device/devres.h for the users that are only interested in devres APIs.
Original work by Andy Shevchenko:
https://lore.kernel.org/r/20241203195340.855879-1-andriy.shevchenko@linux.intel.com
2. Introduces a more robust and cleaner devm_kmemdup_array() helper and uses it
across drivers.
The idea behind embedding both work into a single series is to make the review
process easier and reduce conflicts while merging.
Link: https://lore.kernel.org/r/20250212062513.2254767-1-raag.jadav@intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Introduce '_array' variant of devm_kmemdup() which is more robust and
consistent with alloc family of helpers.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Convert to use devm_kmemdup_array() which is more robust.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Instead of including a huge device.h with tons of dependencies
include only what driver actually uses.
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Convert to use devm_kmemdup_array() and while at it, use source size
instead of destination.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Convert to use devm_kmemdup_array() and while at it, use source size
instead of destination.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Convert to use devm_kmemdup_array() which is more robust.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Convert to use devm_kmemdup_array() and while at it, use source size
instead of destination.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Convert to use devm_kmemdup_array() and while at it, use source size
instead of destination.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Copy communities using devm_kmemdup_array() instead of doing it manually.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
device.h is a huge header which is hard to follow and easy to miss
something. Improve that by splitting devres APIs to device/devres.h.
In particular this helps to speedup the build of the code that includes
device.h solely for a devres APIs.
While at it, cast the error pointers to __iomem using IOMEM_ERR_PTR()
and fix sparse warnings.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Since IOMEM_ERR_PTR() macro deals with an error pointer, a better place
for it is err.h. This helps avoid dependency on io.h for the users that
don't need it.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Do a bit of house keeping in gpu_scheduler.h by grouping the API by type
of object it operates on.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Philipp Stanner <phasta@kernel.org>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250221105038.79665-7-tvrtko.ursulin@igalia.com
Now that we have a header file for internal scheduler interfaces we can
move some more prototypes into it. By doing that we eliminate the chance
of drivers trying to use something which was not intended to be used.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Philipp Stanner <phasta@kernel.org>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250221105038.79665-6-tvrtko.ursulin@igalia.com
Helper is for scheduler internal use so lets hide it from DRM drivers
completely.
At the same time we change the method of checking whethere there is
anything in the queue from peeking to looking at the node count.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Philipp Stanner <phasta@kernel.org>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250221105038.79665-5-tvrtko.ursulin@igalia.com
We can re-order some struct members and take u32 credits outside of the
pointer sandwich and also for the last_dependency member we can get away
with an unsigned int since for dependency we use xa_limit_32b.
Pahole report before:
/* size: 160, cachelines: 3, members: 14 */
/* sum members: 156, holes: 1, sum holes: 4 */
/* last cacheline: 32 bytes */
And after:
/* size: 152, cachelines: 3, members: 14 */
/* last cacheline: 24 bytes */
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Philipp Stanner <phasta@kernel.org>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250221105038.79665-4-tvrtko.ursulin@igalia.com
Replace a copy of DRM scheduler's to_drm_sched_job with a copy of a newly
added drm_sched_entity_queue_pop.
This allows breaking the hidden dependency that queue_node has to be the
first element in struct drm_sched_job.
A comment is also added with a reference to the mailing list discussion
explaining the copied helper will be removed when the whole broken
amdgpu_job_stop_all_jobs_on_sched is removed.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Philipp Stanner <phasta@kernel.org>
Cc: Zhang, Hawking <Hawking.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250221105038.79665-3-tvrtko.ursulin@igalia.com
Idea is to add helpers for peeking and popping jobs from entities with
the goal of decoupling the hidden assumption in the code that queue_node
is the first element in struct drm_sched_job.
That assumption usually comes in the form of:
while ((job = to_drm_sched_job(spsc_queue_pop(&entity->job_queue))))
Which breaks if the queue_node is re-positioned due to_drm_sched_job
being implemented with a container_of.
This also allows us to remove duplicate definitions of to_drm_sched_job.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Philipp Stanner <phasta@kernel.org>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250221105038.79665-2-tvrtko.ursulin@igalia.com
When the kernel is compiled without LED framework support the
rtl8366rb fails to build like this:
rtl8366rb.o: in function `rtl8366rb_setup_led':
rtl8366rb.c:953:(.text.unlikely.rtl8366rb_setup_led+0xe8):
undefined reference to `led_init_default_state_get'
rtl8366rb.c:980:(.text.unlikely.rtl8366rb_setup_led+0x240):
undefined reference to `devm_led_classdev_register_ext'
As this is constantly coming up in different randconfig builds,
bite the bullet and create a separate file for the offending
code, split out a header with all stuff needed both in the
core driver and the leds code.
Add a new bool Kconfig option for the LED compile target, such
that it depends on LEDS_CLASS=y || LEDS_CLASS=RTL8366RB
which make LED support always available when LEDS_CLASS is
compiled into the kernel and enforce that if the LEDS_CLASS
is a module, then the RTL8366RB driver needs to be a module
as well so that modprobe can resolve the dependencies.
Fixes: 32d6170054 ("net: dsa: realtek: add LED drivers for rtl8366rb")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202502070525.xMUImayb-lkp@intel.com/
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For consistency with most other code that can access requested
descriptors: read the flags once atomically and then test individual
bits from the helper variable. This avoids any potential discrepancies
should flags change during the debug print.
Link: https://lore.kernel.org/r/20250215100847.30136-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
As per the API contract, the get_direction() callback can only
return 0, 1 or a negative error number. Add a wrapper around the callback
calls that filters out anything else.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250210-gpio-sanitize-retvals-v1-8-12ea88506cb2@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The return value of the direction_input() callback may be propagated to
user-space. As per the API contract it can only return 0 or a negative
error number. Add a wrapper around the callback calls that filters out
anything else.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250210-gpio-sanitize-retvals-v1-7-12ea88506cb2@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The return value of the direction_output() callback may be propagated to
user-space. As per the API contract it can only return 0 or a negative
error number. Add a wrapper around the callback calls that filters out
anything else.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250210-gpio-sanitize-retvals-v1-6-12ea88506cb2@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>