Commit graph

1,403,262 commits

Author SHA1 Message Date
Bartosz Golaszewski
74abd086d2 gpiolib: sanitize the return value of gpio_chip::get_multiple()
As per the API contract, the get_multiple() callback is only allowed to
return 0 or a negative error number. Filter out anything else.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250210-gpio-sanitize-retvals-v1-5-12ea88506cb2@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-02-24 10:02:33 +01:00
Bartosz Golaszewski
86ef402d80 gpiolib: sanitize the return value of gpio_chip::get()
As per the API contract, the get() callback is only allowed to return 0,
1 or a negative error number. Add a wrapper around the callback calls
that filters out anything else.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250210-gpio-sanitize-retvals-v1-4-12ea88506cb2@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-02-24 09:58:58 +01:00
Bartosz Golaszewski
dcf8f3bffa gpiolib: sanitize the return value of gpio_chip::set_config()
The return value of the set_config() callback may be propagated to
user-space. If a bad driver returns a positive number, it may confuse
user programs. Tighten the API contract and check for positive numbers
returned by GPIO controllers.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250210-gpio-sanitize-retvals-v1-3-12ea88506cb2@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-02-24 09:58:58 +01:00
Bartosz Golaszewski
69920338f8 gpiolib: sanitize the return value of gpio_chip::request()
The return value of the request() callback may be propagated to
user-space. If a bad driver returns a positive number, it may confuse
user programs. Tighten the API contract and check for positive numbers
returned by GPIO controllers.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250210-gpio-sanitize-retvals-v1-2-12ea88506cb2@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2025-02-24 09:58:58 +01:00
Bartosz Golaszewski
2d13f801f1 Linux 6.14-rc4
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAme7hfkeHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGU+IH/1bk6zIvAwXXS5yu
 KNsQ8dEkC3Xme6HqLtPsAhRLF+5YJf6MaGm1ip5dDMyIvasa2gwvCQQQoOpeMbKj
 79VKT+m9t3szMHZaQYjlOuYHBmNSJ4cMCD2Qh6ktXHGPfTTWDFGf7fBwBOkVNeJU
 1Ask+bxeop21aJMhfYXrUta3OYyerLBUR6jCiCM82A/GLtdv6oNGXBu3ygDt9Tjx
 ZHSl+CYjKpmGUP8JnMKwCBHVguEfqgzZ//dY1H16AvOLed9k2jkMFn8O5Vi3vjnx
 TWMMXoiJimuamGzbjxtCCqzxNlFFDT4gRpDqeJxb16W/gDTFmbRr9LDjNehCZe33
 AigLZ6M=
 =Y/7F
 -----END PGP SIGNATURE-----

Merge tag 'v6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into HEAD

Linux 6.14-rc4
2025-02-24 09:58:42 +01:00
Benjamin Tissoires
834da3756f HID: bpf: add a v6.11+ compatible BPF fixup for the XPPen ACK05 remote
With v6.11+, we can actually call hid_hw_output_report() and put the device
into raw mode, thus getting accurate events without being messed up.

Technically we could do the same on v6.10, but given that wayland, gnome
and KDE are still not capable of handling the dial, and that v6.10 is EOL,
we can safely save a little bit of compilation by only allowing v6.11+.

We can easily export the battery information to userspace by adding a
dedicated report. However, we need to cheat on the kernel to force it
not to query the battery by making the physical collection a stylus. The
kernel will then only rely on the events it gets from the device.

Link: https://gitlab.freedesktop.org/libevdev/udev-hid-bpf/-/merge_requests/133
Acked-by: Jiri Kosina <jkosina@suse.com>
Link: https://patch.msgid.link/20250207-bpf-import-2025-02-07-v1-7-6048fdd5a206@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
2025-02-24 09:25:34 +01:00
Benjamin Tissoires
4a94deb949 HID: bpf: new hid_bpf_async.h common header
The purpose is to simplify the use of bpf_wq to defer blocking
operations in a sleepable context. Compared to a more "classic"
async approach, there is no sync mechanism to wait for the async
to finish.

The "simple" API is the following:

```

static int HID_BPF_ASYNC(async_fun)(struct hid_bpf_ctx *hctx)
{
        bpf_printk("%s", __fun__);
        return 0;
}

SEC("syscall")
int probe(struct hid_bpf_probe_args *ctx)
{
        ctx->retval = HID_BPF_ASYNC_INIT(async_fun);
        return 0;
}

SEC(HID_BPF_DEVICE_EVENT)
int BPF_PROG(event_handler, struct hid_bpf_ctx *hctx)
{
        /* async_fun() can be called now, it's not a sleepable
         * function in this example
         */
        async_fun(hctx);

        /* but we can also delay the call by 10 ms */
        HID_BPF_ASYNC_DELAYED_CALL(async_fun, hctx, 10);

        return 0;
}

HID_BPF_OPS(xppen_ack05_remote) = {
        .hid_device_event = (void *)event_handler,
};
```

Link: https://gitlab.freedesktop.org/libevdev/udev-hid-bpf/-/merge_requests/133
Acked-by: Jiri Kosina <jkosina@suse.com>
Link: https://patch.msgid.link/20250207-bpf-import-2025-02-07-v1-6-6048fdd5a206@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
2025-02-24 09:25:34 +01:00
Benjamin Tissoires
91bb3115ef HID: bpf: import new kfunc from v6.10 & v6.11
These kfunc are all in v6.10 except for the hid_bpf_try_input_report()
which will be in v6.11. Import their definition once now so we can make
use of it.

Link: https://gitlab.freedesktop.org/libevdev/udev-hid-bpf/-/merge_requests/114
Acked-by: Jiri Kosina <jkosina@suse.com>
Link: https://patch.msgid.link/20250207-bpf-import-2025-02-07-v1-5-6048fdd5a206@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
2025-02-24 09:25:34 +01:00
Benjamin Tissoires
4be933521f HID: bpf: add support for the XP-Pen Artist Pro 19 (gen2)
The device behaves the same than the 16" and 14" models, so let's just
add support for it too.

Link: https://gitlab.freedesktop.org/libevdev/udev-hid-bpf/-/merge_requests/145
Acked-by: Jiri Kosina <jkosina@suse.com>
Link: https://patch.msgid.link/20250207-bpf-import-2025-02-07-v1-4-6048fdd5a206@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
2025-02-24 09:25:34 +01:00
Benjamin Tissoires
531a1cc667 HID: bpf: Added updated Kamvas Pro 19 descriptor
This adds an updated HID descriptor for the Huion Kamvas Pro 19 that is
present on newer firmware revisions, while also trying to keep
compat with the older versions.

Link: https://gitlab.freedesktop.org/libevdev/udev-hid-bpf/-/merge_requests/164
Signed-off-by: Aki Van Ness <aki@lethalbit.net>
Acked-by: Jiri Kosina <jkosina@suse.com>
Link: https://patch.msgid.link/20250207-bpf-import-2025-02-07-v1-3-6048fdd5a206@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
2025-02-24 09:25:34 +01:00
Benjamin Tissoires
43db1911f8 HID: bpf: Suppress bogus F13 trigger on Sirius keyboard full fan shortcut
The TUXEDO Sirius 16 Gen1 and the TUXEDO Sirius 16 Gen2 Notebooks have an
additional "fan" key next to F12.

Pressing it alone sends a F14 key press which can be bound by user space.

Pressing it while holding the FN key triggers two things:
- The EC firmware locks the fan speed of the internal fans at 100%
- F13 key press is registered which by default is already bound in xkb and
  desktop environments (e.g. in KDE Plasma it launches system settings)

To avoid this unexpected double duty of the FN shortcut, this bpf program
suppresses the F13 key press.

Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://gitlab.freedesktop.org/libevdev/udev-hid-bpf/-/merge_requests/166
Acked-by: Jiri Kosina <jkosina@suse.com>
Link: https://patch.msgid.link/20250207-bpf-import-2025-02-07-v1-2-6048fdd5a206@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
2025-02-24 09:25:33 +01:00
Benjamin Tissoires
56be863932 HID: bpf: Add support for the default firmware mode of the Huion K20
This re-uses the same HID report descriptor that we also use for
the tablet mode after switching the device. The keys send uniquely
identifyable shortcuts so we can map those to buttons.

However the dial and the button inside the dial send events on a
different hidraw node and they are unreliable (e.g. the button does not
get released reliably). So they're ignored in this patch, it's not
worth the effort getting those to work correctly.

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Link: https://gitlab.freedesktop.org/libevdev/udev-hid-bpf/-/merge_requests/158
Acked-by: Jiri Kosina <jkosina@suse.com>
Link: https://patch.msgid.link/20250207-bpf-import-2025-02-07-v1-1-6048fdd5a206@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
2025-02-24 09:25:33 +01:00
Jason Wang
e13b6da704 virtio-net: tweak for better TX performance in NAPI mode
There are several issues existed in start_xmit():

- Transmitted packets need to be freed before sending a packet, this
  introduces delay and increases the average packets transmit
  time. This also increase the time that spent in holding the TX lock.
- Notification is enabled after free_old_xmit_skbs() which will
  introduce unnecessary interrupts if TX notification happens on the
  same CPU that is doing the transmission now (actually, virtio-net
  driver are optimized for this case).

So this patch tries to avoid those issues by not cleaning transmitted
packets in start_xmit() when TX NAPI is enabled and disable
notifications even more aggressively. Notification will be since the
beginning of the start_xmit(). But we can't enable delayed
notification after TX is stopped as we will lose the
notifications. Instead, the delayed notification needs is enabled
after the virtqueue is kicked for best performance.

Performance numbers:

1) single queue 2 vcpus guest with pktgen_sample03_burst_single_flow.sh
   (burst 256) + testpmd (rxonly) on the host:

- When pinning TX IRQ to pktgen VCPU: split virtqueue PPS were
  increased 55% from 6.89 Mpps to 10.7 Mpps and 32% TX interrupts were
  eliminated. Packed virtqueue PPS were increased 50% from 7.09 Mpps to
  10.7 Mpps, 99% TX interrupts were eliminated.

- When pinning TX IRQ to VCPU other than pktgen: split virtqueue PPS
  were increased 96% from 5.29 Mpps to 10.4 Mpps and 45% TX interrupts
  were eliminated; Packed virtqueue PPS were increased 78% from 6.12
  Mpps to 10.9 Mpps and 99% TX interrupts were eliminated.

2) single queue 1 vcpu guest + vhost-net/TAP on the host: single
   session netperf from guest to host shows 82% improvement from
   31Gb/s to 58Gb/s, %stddev were reduced from 34.5% to 1.9% and 88%
   of TX interrupts were eliminated.

Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2025-02-24 08:10:24 +00:00
Alan Borzeszkowski
72cef52b35 thunderbolt: Make tb_tunnel_alloc_usb3() error paths consistent with the rest
Make the tb_tunnel_alloc_usb3() error codepaths consistent with the
DisplayPort and PCIe counterparts.

No functional changes.

Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2025-02-24 09:36:47 +02:00
Gautam Menghani
65acbd1285 arch/powerpc: Remove unused function icp_native_cause_ipi_rm()
Remove icp_native_cause_ipi_rm() as it has no callers since
commit 53af3ba2e819("KVM: PPC: Book3S HV: Allow guest exit path to have
MMU on")

Signed-off-by: Gautam Menghani <gautam@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250101134251.436679-1-gautam@linux.ibm.com
2025-02-24 12:26:21 +05:30
Christophe Leroy
f17bcb97ed powerpc/time: Define div128_by_32() static and __init
div128_by_32() used to be called from outside time.c in the old days
but since v2.6.15 it hasn't been used outside time.c

$ git grep div128_by_32 v2.6.14
v2.6.14:arch/ppc64/kernel/iSeries_setup.c:	div128_by_32(1024 * 1024, 0, tb_ticks_per_sec, &divres);
v2.6.14:arch/ppc64/kernel/pmac_time.c:	div128_by_32( 1024*1024, 0, tb_ticks_per_sec, &divres );
v2.6.14:arch/ppc64/kernel/time.c:				div128_by_32( XSEC_PER_SEC, 0, tb_ticks_per_sec, &divres );
v2.6.14:arch/ppc64/kernel/time.c:	div128_by_32(1024*1024, 0, tb_ticks_per_sec, &divres);
v2.6.14:arch/ppc64/kernel/time.c:	div128_by_32(1000000000, 0, tb_ticks_per_sec, &res);
v2.6.14:arch/ppc64/kernel/time.c:	div128_by_32( 1024*1024, 0, new_tb_ticks_per_sec, &divres );
v2.6.14:arch/ppc64/kernel/time.c:void div128_by_32( unsigned long dividend_high, unsigned long dividend_low,
v2.6.14:include/asm-ppc64/time.h:void div128_by_32( unsigned long dividend_high, unsigned long dividend_low,

$ git grep div128_by_32 v2.6.15
v2.6.15:arch/powerpc/kernel/time.c:				div128_by_32( XSEC_PER_SEC, 0, tb_ticks_per_sec, &divres );
v2.6.15:arch/powerpc/kernel/time.c:	div128_by_32(1024*1024, 0, tb_ticks_per_sec, &res);
v2.6.15:arch/powerpc/kernel/time.c:	div128_by_32(1000000000, 0, tb_ticks_per_sec, &res);
v2.6.15:arch/powerpc/kernel/time.c:	div128_by_32(1024*1024, 0, new_tb_ticks_per_sec, &divres);
v2.6.15:arch/powerpc/kernel/time.c:void div128_by_32(u64 dividend_high, u64 dividend_low,
v2.6.15:include/asm-powerpc/time.h:extern void div128_by_32(u64 dividend_high, u64 dividend_low,

Move it above its only caller which is time_init() and define it
static and __init.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/50810349bf1eee378fbeab72a36e4b6553a60c3d.1738749246.git.christophe.leroy@csgroup.eu
2025-02-24 12:26:21 +05:30
Christophe Leroy
67d9391597 powerpc/ipic: Stop printing address of registers
The following line appears at boot:

	IPIC (128 IRQ sources) at (ptrval)

This is pointless so remove the printing of the virtual address and
replace it by matching physical address.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/ecffb21d88405f99e7ffc906a733396c57c36d50.1736405302.git.christophe.leroy@csgroup.eu
2025-02-24 12:26:21 +05:30
Christophe Leroy
2bf3caa7cc powerpc/32: Stop printing Kernel virtual memory layout
Printing of Kernel virtual memory layout was added for debug purpose
by commit f637a49e50 ("powerpc: Minor cleanups of kernel virt
address space definitions")

For security reasons, don't display the kernel's virtual memory layout.

Other architectures have removed it through following commits.

Commit 071929dbdd ("arm64: Stop printing the virtual memory layout")
Commit 1c31d4e96b ("ARM: 8820/1: mm: Stop printing the virtual memory layout")
Commit 31833332f7 ("m68k/mm: Stop printing the virtual memory layout")
Commit fd8d0ca256 ("parisc: Hide virtual kernel memory layout")
Commit 681ff0181b ("x86/mm/init/32: Stop printing the virtual memory layout")

Commit 681ff0181b ("x86/mm/init/32: Stop printing the virtual memory
layout") thought x86 was the last one, but in reality powerpc/32 still
had it.

So remove it now on powerpc/32 as well.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Kees Cook <kees@kernel.org>
[Maddy: Added "Commit" in commit message to avoid checkpatch error]
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/430bc8c1f2ff2eb9224b04450e22db472b0b9fa9.1736361630.git.christophe.leroy@csgroup.eu
2025-02-24 12:26:21 +05:30
Christophe Leroy
2c1cbbab62 powerpc/vmlinux: Remove etext, edata and end
etext is not used anymore since commit 843a1ffaf6 ("powerpc/mm: use
core_kernel_text() helper")

edata and end have not been used since the merge of arch/ppc/ and
arch/ppc64/

Remove the three and remove macro PROVIDE32.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/d1686d36cdd6b9d681e7ee4dd677c386d43babb1.1736332415.git.christophe.leroy@csgroup.eu
2025-02-24 12:26:21 +05:30
Christophe Leroy
779c501cab powerpc/44x: Declare primary_uic static in uic.c
primary_uic is not used outside uic.c, declare it static.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202411101746.lD8YdVzY-lkp@intel.com/
Fixes: e58923ed14 ("[POWERPC] Add arch/powerpc driver for UIC, PPC4xx interrupt controller")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/0e11233d30333610ab460b3a1fd0f43c3a51e34d.1736331884.git.christophe.leroy@csgroup.eu
2025-02-24 12:26:21 +05:30
Tejas Upadhyay
b7b68c6e36 drm/xe/wa: Limit char per line to 100
Above 100 char per line checkpatch would complain. Fixing it.

Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250221115344.389975-1-tejas.upadhyay@intel.com
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
2025-02-24 12:10:10 +05:30
Manikanta Mylavarapu
017c28788a arm64: dts: qcom: ipq5424: Add thermal zone nodes
Add thermal zone nodes for sensors present in IPQ5424.

Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Link: https://lore.kernel.org/r/20250210120436.821684-7-quic_mmanikan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-02-23 22:48:51 -06:00
Manikanta Mylavarapu
a61adfe296 arm64: dts: qcom: ipq5424: Add tsens node
IPQ5424 has tsens v2.3.3 peripheral. This patch adds the tsens
node with nvmem cells for calibration data.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Link: https://lore.kernel.org/r/20250210120436.821684-6-quic_mmanikan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-02-23 22:48:51 -06:00
Praveenkumar I
9b341f3429 arm64: dts: qcom: ipq5332: Add thermal zone nodes
This patch adds thermal zone nodes for sensors present in
IPQ5332.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Link: https://lore.kernel.org/r/20250210120436.821684-5-quic_mmanikan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-02-23 22:48:51 -06:00
Praveenkumar I
3fe12c798f arm64: dts: qcom: ipq5332: Add tsens node
IPQ5332 has tsens v2.3.3 peripheral. This patch adds the tsens
node with nvmem cells for calibration data.

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Link: https://lore.kernel.org/r/20250210120436.821684-4-quic_mmanikan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-02-23 22:48:51 -06:00
Chukun Pan
a566fb9ba8 arm64: dts: qcom: ipq6018: add LDOA2 regulator
Add LDOA2 regulator from MP5496 to support SDCC voltage scaling.

Suggested-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250210070122.208842-6-amadeus@jmu.edu.cn
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-02-23 22:48:33 -06:00
Chukun Pan
e60f872c2d arm64: dts: qcom: ipq6018: rename labels of mp5496 regulator
Change the labels of mp5496 regulator from ipq6018 to mp5496.

Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20250210070122.208842-5-amadeus@jmu.edu.cn
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-02-23 22:48:33 -06:00
Chukun Pan
0c4c0f14b7 arm64: dts: qcom: ipq6018: move mp5496 regulator out of soc dtsi
Some IPQ60xx SoCs don't come with the mp5496 pmic chip. The mp5496
pmic was never part of the IPQ60xx SoC, it's optional, so we moved
it out of the soc dtsi.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250210070122.208842-4-amadeus@jmu.edu.cn
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-02-23 22:48:33 -06:00
Chukun Pan
a96e765a7b arm64: dts: qcom: ipq6018: add 1.5GHz CPU Frequency
The early version of IPQ6000 (SoC id: IPQ6018, SBL version:
BOOT.XF.0.3-00077-IPQ60xxLZB-2) and IPQ6005 SoCs can reach
a max frequency of 1.5GHz, so add this CPU frequency.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20250210070122.208842-3-amadeus@jmu.edu.cn
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-02-23 22:48:33 -06:00
Chukun Pan
144230e584 arm64: dts: qcom: ipq6018: add 1.2GHz CPU Frequency
The final version of IPQ6000 (SoC id: IPQ6000, SBL version:
BOOT.XF.0.3-00086-IPQ60xxLZB-1) has a max design frequency
of 1.2GHz, so add this CPU frequency.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250210070122.208842-2-amadeus@jmu.edu.cn
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-02-23 22:48:33 -06:00
Cheng Jiang
bd3801a8d4 arm64: dts: qcom: sa8775p-ride: Add firmware-name in BT node
The sa8775p-ride platform uses the QCA6698 Bluetooth chip. While the
QCA6698 shares the same IP core as the WCN6855, it has different RF
components and RAM sizes, requiring new firmware files. Use the
firmware-name property to specify the NVM and rampatch firmware to load.

Signed-off-by: Cheng Jiang <quic_chejiang@quicinc.com>
Reviewed-by: Zijun Hu <quic_zijuhu@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250110063914.28001-2-quic_chejiang@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-02-23 22:43:13 -06:00
Mark Kettenis
45bd6ff900 arm64: dts: qcom: x1e80100: Mark usb_2 as dma-coherent
Make this USB controller consistent with the others on this platform.

Fixes: 4af46b7bd6 ("arm64: dts: qcom: x1e80100: Add USB nodes")
Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250109205232.92336-1-kettenis@openbsd.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-02-23 22:43:03 -06:00
Kent Overstreet
cf3e696026 bcachefs: fix bch2_extent_ptr_eq()
Reviewed-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2025-02-23 23:35:33 -05:00
Dmitry Baryshkov
341e662321 arm64: dts: qcom: qrb5165-rb5: enable sensors DSP
Enable SLPI, sensors DSP, on the Qualcomm Robotics RB5 platform. The
firmware for the DSP is a part of linux-firmware repository.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250222-rb3-rb5-slpi-v1-2-6739be1684b6@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-02-23 22:08:57 -06:00
Dmitry Baryshkov
7373610dde arm64: dts: qcom: sdm845-db845c: enable sensors DSP
Enable SLPI, sensors DSP, on the Qualcomm Robotics RB3 platform. The
firmware for the DSP is a part of linux-firmware repository.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250222-rb3-rb5-slpi-v1-1-6739be1684b6@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-02-23 22:08:57 -06:00
Pengyu Luo
5429861bdc arm64: dts: qcom: sc8280xp: Fix clock for spi0 to spi7
Enabling spi6 caused boot loop on my device(Huawei Matebook E Go),

	&spi6 {
		pinctrl-0 = <&spi6_default>;
		pinctrl-names = "default";

		status = "okay";
	};

After looking into this, I found the clocks for spi0 to spi7 are
wrong, we can derive the correct clocks from the regular pattern
between spi8 to spi15, spi16 to spi23. Or we can verify it according
to the hex file of BSRC_QSPI.bin(From windows driver qcspi8280.cab)

000035d0: 0700 4445 5649 4345 0001 000a 005c 5f53  ..DEVICE.....\_S
000035e0: 422e 5350 4937 0003 0076 0001 000a 0043  B.SPI7...v.....C
000035f0: 4f4d 504f 4e45 4e54 0000 0008 0000 0000  OMPONENT........
00003600: 0000 0000 0003 0017 0001 0007 0046 5354  .............FST
00003610: 4154 4500 0000 0800 0000 0000 0000 0000  ATE.............
00003620: 0300 3d00 0100 1400 4449 5343 4f56 4552  ..=.....DISCOVER
00003630: 4142 4c45 5f50 5354 4154 4500 0100 0600  ABLE_PSTATE.....
00003640: 434c 4f43 4b00 0100 1700 6763 635f 7175  CLOCK.....gcc_qu
00003650: 7076 335f 7772 6170 305f 7336 5f63 6c6b  pv3_wrap0_s6_clk

Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250223110152.47192-1-mitltlatltl@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2025-02-23 22:07:47 -06:00
Kai Mäkisara
23f4e82bb9 scsi: scsi_debug: Add support for partitioning the tape
This patch adds support for MEDIUM PARTITION PAGE in MODE SELECT and the
FORMAT MEDIUM command for tapes. After these additions, the virtual tape
can be partitioned containing either one or two partitions. The POFM flag
in the mode page is set, meaning that the FORMAT MEDIUM command must be
used to create the partitioning defined in the mode page.

Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Link: https://lore.kernel.org/r/20250213092636.2510-8-Kai.Makisara@kolumbus.fi
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Tested-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-23 22:01:04 -05:00
Kai Mäkisara
862a5556b1 scsi: scsi_debug: Reset tape setting at device reset
Set tape block size, density and compression to default values when the
device is reset (either directly or via target, bus or host reset).

Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Link: https://lore.kernel.org/r/20250213092636.2510-7-Kai.Makisara@kolumbus.fi
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Tested-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-23 22:01:03 -05:00
Kai Mäkisara
568354b24c scsi: scsi_debug: Add compression mode page for tapes
Add support for compression mode page. The compression status
is saved and returned. No UA is generated.

Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Link: https://lore.kernel.org/r/20250213092636.2510-6-Kai.Makisara@kolumbus.fi
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Tested-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-23 22:01:03 -05:00
Kai Mäkisara
0744d3114c scsi: scsi_debug: Add read support and update locate for tapes
Support for the READ (6) and SPACE (6) commands for tapes based on the
previous write patch is added. The LOCATE (10) command is updated to use
the written data.

Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Link: https://lore.kernel.org/r/20250213092636.2510-5-Kai.Makisara@kolumbus.fi
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Tested-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-23 22:01:03 -05:00
Kai Mäkisara
e1ac21310a scsi: scsi_debug: Add write support with block lengths and 4 bytes of data
The tape is implemented as fixed number (10 000) of 8-byte units.  The
first four bytes of a unit contains the type of the unit (data block,
filemark or end-of-data mark). If the units is a data block, the first four
bytes contain the block length and the remaining four bytes the first bytes
of written data. This allows the user to use tags to see that the read
block is what it was supposed to be.

The tape can contain two partitions. Initially it is formatted as one
partition consisting of all 10 000 units.

This patch adds the WRITE(6) command for tapes and the WRITE FILEMARKS (6)
command. The REWIND command is updated.

Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Link: https://lore.kernel.org/r/20250213092636.2510-4-Kai.Makisara@kolumbus.fi
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Tested-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-23 22:01:02 -05:00
Kai Mäkisara
e7795366c4 scsi: scsi_debug: Add READ BLOCK LIMITS and modify LOAD for tapes
The changes:

 - Add READ BLOCK LIMITS (512 - 1048576 bytes)

 - Make LOAD send New Media UA (not correct by the standard, but makes
   possible to test also this UA)

Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Link: https://lore.kernel.org/r/20250213092636.2510-3-Kai.Makisara@kolumbus.fi
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Tested-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-23 22:01:02 -05:00
Kai Mäkisara
f69da85d5d scsi: scsi_debug: First fixes for tapes
Patch includes the following:

 - Enable MODE SENSE/SELECT without actual page (to read/write only the
   Block Descriptor)

 - Store the density code and block size in the Block Descriptor (only
   short version for tapes)

 - Fix REWIND not to use the wrong page filling function

Signed-off-by: Kai Mäkisara <Kai.Makisara@kolumbus.fi>
Link: https://lore.kernel.org/r/20250213092636.2510-2-Kai.Makisara@kolumbus.fi
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Tested-by: John Meneghini <jmeneghi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2025-02-23 22:01:02 -05:00
Dhananjay Ugwekar
3e93edc58a cpufreq/amd-pstate: Remove the unncecessary driver_lock in amd_pstate_update_limits
There is no need to take a driver wide lock while updating the
highest_perf value in the percpu cpudata struct. Hence remove it.

Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://lore.kernel.org/r/20250205112523.201101-13-dhananjay.ugwekar@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2025-02-23 18:54:56 -06:00
Dhananjay Ugwekar
97a705dc1a cpufreq/amd-pstate: Use scope based cleanup for cpufreq_policy refs
There have been instances in past where refcount decrementing is missed
while exiting a function. Use automatic scope based cleanup to avoid
such errors.

Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://lore.kernel.org/r/20250205112523.201101-12-dhananjay.ugwekar@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2025-02-23 18:54:56 -06:00
Dhananjay Ugwekar
426db24d4d cpufreq/amd-pstate: Add missing NULL ptr check in amd_pstate_update
Check if policy is NULL before dereferencing it in amd_pstate_update.

Fixes: e8f555daac ("cpufreq/amd-pstate: fix setting policy current frequency value")
Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://lore.kernel.org/r/20250205112523.201101-11-dhananjay.ugwekar@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2025-02-23 18:54:56 -06:00
Dhananjay Ugwekar
b899434857 cpufreq/amd-pstate: Remove the unnecessary cpufreq_update_policy call
The update_limits callback is only called in two conditions.

* When the preferred core rankings change. In which case, we just need to
change the prefcore ranking in the cpudata struct. As there are no changes
to any of the perf values, there is no need to call cpufreq_update_policy()

* When the _PPC ACPI object changes, i.e. the highest allowed Pstate
changes. The _PPC object is only used for a table based cpufreq driver
like acpi-cpufreq, hence is irrelevant for CPPC based amd-pstate.

Hence, the cpufreq_update_policy() call becomes unnecessary and can be
removed.

Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://lore.kernel.org/r/20250205112523.201101-9-dhananjay.ugwekar@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2025-02-23 18:54:56 -06:00
Dhananjay Ugwekar
620136ced3 cpufreq/amd-pstate: Modularize perf<->freq conversion
Delegate the perf<->frequency conversion to helper functions to reduce
code duplication, and improve readability.

Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://lore.kernel.org/r/20250205112523.201101-8-dhananjay.ugwekar@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2025-02-23 18:54:56 -06:00
Dhananjay Ugwekar
555bbe67a6 cpufreq/amd-pstate: Convert all perf values to u8
All perf values are always within 0-255 range, hence convert their
datatype to u8 everywhere.

Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://lore.kernel.org/r/20250205112523.201101-7-dhananjay.ugwekar@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2025-02-23 18:54:56 -06:00
Dhananjay Ugwekar
e9869c836b cpufreq/amd-pstate: Pass min/max_limit_perf as min/max_perf to amd_pstate_update
Currently, amd_pstate_update_freq passes the hardware perf limits as
min/max_perf to amd_pstate_update, which eventually gets programmed into
the min/max_perf fields of the CPPC_REQ register.

Instead pass the effective perf limits i.e. min/max_limit_perf values to
amd_pstate_update as min/max_perf.

Signed-off-by: Dhananjay Ugwekar <dhananjay.ugwekar@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://lore.kernel.org/r/20250205112523.201101-6-dhananjay.ugwekar@amd.com
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
2025-02-23 18:54:56 -06:00