Commit graph

1,403,262 commits

Author SHA1 Message Date
Nicolas Escande
af1c6007a6 wifi: ath12k: Add missing htt_metadata flag in ath12k_dp_tx()
When AP-VLAN support was added, the HTT_TCL_META_DATA_VALID_HTT flag
was not added to the tx_info's meta_data_flags. Without this flag the
firmware seems to reject all the broadcast (ap-vlan) frames. So add
the flag, just as ath11k did it in the downstream QSDK project[1].

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1

Fixes: 26dd8ccdba ("wifi: ath12k: dynamic VLAN support")
Signed-off-by: Nicolas Escande <nico.escande@gmail.com>
Link: https://git.codelinaro.org/clo/qsdk/oss/system/feeds/wlan-open/-/blob/win.wlan_host_opensource.3.0.r24/patches/ath11k/207-ath11k-Add-support-for-dynamic-vlan.patch # [1]
Link: https://patch.msgid.link/20250124113331.93476-1-nico.escande@gmail.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-20 13:37:43 -08:00
P Praneesh
cb9a978a20 wifi: ath12k: remove redundant declaration of ath12k_dp_rx_h_find_peer()
The current code in dp_rx.h declares the ath12k_dp_rx_h_find_peer() twice.
Fix this by removing one of the redundant declarations of
ath12k_dp_rx_h_find_peer() to ensure that the function is declared only
once.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Signed-off-by: P Praneesh <praneesh.p@oss.qualcomm.com>
Link: https://patch.msgid.link/20250219053640.223734-1-praneesh.p@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-20 13:37:43 -08:00
Haoxiang Li
e31e3f6c0c
soc: loongson: loongson2_guts: Add check for devm_kstrdup()
Add check for the return value of devm_kstrdup() in
loongson2_guts_probe() to catch potential exception.

Fixes: b82621ac84 ("soc: loongson: add GUTS driver for loongson-2 platforms")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Link: https://lore.kernel.org/r/20250220081714.2676828-1-haoxiang_li2024@163.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-02-20 22:29:05 +01:00
Arnd Bergmann
e1fc41045c Arm SCMI fix for v6.14
Just a single fix to address the incorrect size of the Tx buffer in the
 function scmi_imx_misc_ctrl_set() which is part of NXP/i.MX SCMI vendor
 extensions.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEunHlEgbzHrJD3ZPhAEG6vDF+4pgFAmezWjsACgkQAEG6vDF+
 4piViQ//eekyhdTnsu1oj52ER8htsK09GiP06H4HsFfpA2AvbryLra0Tl7D6Bpq6
 izgHuCJqKhmphVWmUcSy3UUvwF3CI3ScBWYFEKM+hHA7Vey925u3VXQfrA3NOfUP
 4zk27L/VKtSH6DANr1dOWwQOt9amFxVm3o1sADf3jnpwM9cncJLTLfKQ1zuK6q9g
 EmDZc8ZDbynFCrxskY5EDhSIhS9o/H/ODB37Yt19nAXzF/JTao2Fi6IwcVbgJpHI
 Gssrj7kTiYpdsfh3LtaltrXan0iFr+uCm+ANrAOnkaiQldgUMXmwMeSp+VoeXpOq
 dQVZAbMK0BrzC9riuzxqDvcppy29LSxomnZDezwqg0geBmhzTFH6KQENP1pT9gYn
 0oLrSS/8c013I7rEIfKZKatGD5cwdMmIU8p3CDjRmOFA62D5pEsmf0JbO0cwEPdh
 tBym+D0wFJz2FUmuv/zHN5aB4O7uh6WZJzoEyjh5Ds9VQLZ2CSVgDg+s2Btoyf/j
 yhXLPNBy51HkQrB+GnLvOWHocDCcPZVl8LBkdjowUzgpoO6GNxIjBFCD0xFzegh+
 69NAzvf18A89PNBDqfW+iQ5ekorn7zneNZLvdd82wYHv6jtVyuSPm0lgByW6irT+
 tlW6emw1WHvOwmDU0DTJZ6SnJqRBnrs+ILSYXH5+j8kAfBfrNU4=
 =dloZ
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAme3noIACgkQYKtH/8kJ
 UicVLRAAmGM63cHh1MMqYMMIgUM++tJGRn6IoxDtGjoZQpF2sXL7iEtihGtqI7pp
 rDlDVW1+hm1b8/kxUk2JdfxuUt6RnOTo800FwKXyYCHCB2zZCFD0jwHbHYA/At12
 t19HfeSPnVWn2km1FJ3bjjbMertpoG0/zG0ElTNiSY3bv9CsZkkltjw3yKo6M6sZ
 xUAYEN4ZfcI6+ODVao2GIVHOEz56voc9JUELhyJ6W139EOWsj5R2FpwvUqTxMfvO
 QtHrDjX+jdm3btGfQujzpP2clM+wSqZs4FUbAvanb32oPA9i0XbyZixwBH7lma3v
 cpOJRRwbGe45Mb0b0RNvTYGucfz18qy6PEzGQGO2Y7BxrplEjv6NoYEpIubU2vEf
 bmA5f63a42XJjNuSs9nnqaojxfb9ZmPaucj9w18SBRF20BikLgTTmFs1qTqFSv27
 InciJE8DWco/uka00384kgfs6lg8P2iHRYVwVe0o0dX89SawmvK8Wc/j+59hyqwL
 SyO9+Z/6gqTy5zOWEAV166qexR5as8BTBLhQbLMW//nFBVeR95vNxKoB1oS4rKmh
 qJusf3wr1kDsOOGHfLat99Xo84IqynLAKSliH9s81iuuOlQpIqrtQ4DUNyB0hiP7
 winxIB50ylrVdfBmJ8SD+6yVRn0iqbvNmnQe6/roF3t1aYN1BbA=
 =dTib
 -----END PGP SIGNATURE-----

Merge tag 'scmi-fix-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes

Arm SCMI fix for v6.14

Just a single fix to address the incorrect size of the Tx buffer in the
function scmi_imx_misc_ctrl_set() which is part of NXP/i.MX SCMI vendor
extensions.

* tag 'scmi-fix-6.14' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  firmware: arm_scmi: imx: Correct tx size of scmi_imx_misc_ctrl_set

Link: https://lore.kernel.org/r/20250217155246.1668182-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2025-02-20 22:28:33 +01:00
George Moussalem
992ee3ed6e net: phy: qcom: qca807x fix condition for DAC_DSP_BIAS_CURRENT
While setting the DAC value, the wrong boolean value is evaluated to set
the DSP bias current. So let's correct the conditional statement and use
the right boolean value read from the DTS set in the priv.

Cc: stable@vger.kernel.org
Fixes: d1cb613efb ("net: phy: qcom: add support for QCA807x PHY Family")
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250219130923.7216-1-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-20 13:19:35 -08:00
Breno Leitao
bf3624cf1c netdevsim: call napi_schedule from a timer context
The netdevsim driver was experiencing NOHZ tick-stop errors during packet
transmission due to pending softirq work when calling napi_schedule().
This issue was observed when running the netconsole selftest, which
triggered the following error message:

  NOHZ tick-stop error: local softirq work is pending, handler #08!!!

To fix this issue, introduce a timer that schedules napi_schedule()
from a timer context instead of calling it directly from the TX path.

Create an hrtimer for each queue and kick it from the TX path,
which then schedules napi_schedule() from the timer context.

Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250219-netdevsim-v3-1-811e2b8abc4c@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-20 13:18:31 -08:00
Jakub Kicinski
372ab5a5fe Merge branch 'flexible-array-for-ip-tunnel-options'
Gal Pressman says:

====================
Flexible array for ip tunnel options

Remove the hidden assumption that options are allocated at the end of
the struct, and teach the compiler about them using a flexible array.

First patch is converting hard-coded 'info + 1' to use ip_tunnel_info()
helper.
Second patch adds the 'options' flexible array and changes the helper to
use it.

v4: https://lore.kernel.org/20250217202503.265318-1-gal@nvidia.com
v3: https://lore.kernel.org/20250212140953.107533-1-gal@nvidia.com
v2: https://lore.kernel.org/20250209101853.15828-1-gal@nvidia.com
====================

Link: https://patch.msgid.link/20250219143256.370277-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-20 13:17:21 -08:00
Gal Pressman
bb5e62f2d5 net: Add options as a flexible array to struct ip_tunnel_info
Remove the hidden assumption that options are allocated at the end of
the struct, and teach the compiler about them using a flexible array.

With this, we can revert the unsafe_memcpy() call we have in
tun_dst_unclone() [1], and resolve the false field-spanning write
warning caused by the memcpy() in ip_tunnel_info_opts_set().

The layout of struct ip_tunnel_info remains the same with this patch.
Before this patch, there was an implicit padding at the end of the
struct, options would be written at 'info + 1' which is after the
padding.
This will remain the same as this patch explicitly aligns 'options'.
The alignment is needed as the options are later casted to different
structs, and might result in unaligned memory access.

Pahole output before this patch:
struct ip_tunnel_info {
    struct ip_tunnel_key       key;                  /*     0    64 */

    /* XXX last struct has 1 byte of padding */

    /* --- cacheline 1 boundary (64 bytes) --- */
    struct ip_tunnel_encap     encap;                /*    64     8 */
    struct dst_cache           dst_cache;            /*    72    16 */
    u8                         options_len;          /*    88     1 */
    u8                         mode;                 /*    89     1 */

    /* size: 96, cachelines: 2, members: 5 */
    /* padding: 6 */
    /* paddings: 1, sum paddings: 1 */
    /* last cacheline: 32 bytes */
};

Pahole output after this patch:
struct ip_tunnel_info {
    struct ip_tunnel_key       key;                  /*     0    64 */

    /* XXX last struct has 1 byte of padding */

    /* --- cacheline 1 boundary (64 bytes) --- */
    struct ip_tunnel_encap     encap;                /*    64     8 */
    struct dst_cache           dst_cache;            /*    72    16 */
    u8                         options_len;          /*    88     1 */
    u8                         mode;                 /*    89     1 */

    /* XXX 6 bytes hole, try to pack */

    u8                         options[] __attribute__((__aligned__(16))); /*    96     0 */

    /* size: 96, cachelines: 2, members: 6 */
    /* sum members: 90, holes: 1, sum holes: 6 */
    /* paddings: 1, sum paddings: 1 */
    /* forced alignments: 1, forced holes: 1, sum forced holes: 6 */
    /* last cacheline: 32 bytes */
} __attribute__((__aligned__(16)));

[1] Commit 13cfd6a6d7 ("net: Silence false field-spanning write warning in metadata_dst memcpy")

Link: https://lore.kernel.org/all/53D1D353-B8F6-4ADC-8F29-8C48A7C9C6F1@kernel.org/
Suggested-by: Kees Cook <kees@kernel.org>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20250219143256.370277-3-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-20 13:17:16 -08:00
Gal Pressman
ba3fa6e8c1 ip_tunnel: Use ip_tunnel_info() helper instead of 'info + 1'
Tunnel options should not be accessed directly, use the ip_tunnel_info()
accessor instead.

Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20250219143256.370277-2-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-20 13:17:16 -08:00
Thomas Weißschuh
9c812b01f1 tools/nolibc: add support for 32-bit s390
32-bit s390 is very close to the existing 64-bit implementation.

Some special handling is necessary as there is neither LLVM nor
QEMU support. Also the kernel itself can not build natively for 32-bit
s390, so instead the test program is executed with a 64-bit kernel.

Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250206-nolibc-s390-v2-2-991ad97e3d58@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
2025-02-20 22:06:32 +01:00
Thomas Weißschuh
3d1e67c615 selftests/nolibc: rename s390 to s390x
Support for 32-bit s390 is about to be added.
As "s39032" would look horrible, use the another naming scheme.
32-bit s390 is "s390" and 64-bit s390 is "s390x",
similar to how it is handled in various toolchain components.

Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250206-nolibc-s390-v2-1-991ad97e3d58@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
2025-02-20 22:06:18 +01:00
Thomas Weißschuh
00ddf4cc97 selftests/nolibc: only run constructor tests on nolibc
The nolibc testsuite can be run against other libcs to test for
interoperability. Some aspects of the constructor execution are not
standardized and musl does not provide all tested feature, for one it
does not provide arguments to the constructors, anymore?

Skip the constructor tests on non-nolibc configurations.

Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250212-nolibc-test-constructor-v1-1-c963875b3da4@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
2025-02-20 22:04:12 +01:00
Steven Rostedt
e35896f236 selftests/tracing: Allow some more tests to run in instances
The tests:

  trigger-action-hist-xfail.tc
  trigger-onchange-action-hist.tc
  trigger-snapshot-action-hist.tc
  trigger-hist-expressions.tc

can all run in an instance. Test them in an instance as well.

Link: https://lore.kernel.org/r/20250220185846.451234966@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2025-02-20 13:15:14 -07:00
Steven Rostedt
a58cc70af2 selftests/ftrace: Clean up triggers after setting them
The triggers set in trigger-onchange-action-hist.tc and
trigger-snapshot-action-hist.tc are not cleaned up at the end. These tests
can also be done in instances and without cleaning up the triggers, the
instances can not be removed as they are still "busy".

Link: https://lore.kernel.org/r/20250220185846.291817731@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2025-02-20 13:15:07 -07:00
Steven Rostedt
4a3134b114 selftests/tracing: Test only toplevel README file not the instances
For the tests that have both a README attribute as well as the instance
flag to run the tests as an instance, the instance version will always
exit with UNSUPPORTED. That's because the instance directory does not
contain a README file. Currently, the tests check for a README file in the
directory that the test runs in and if there's a requirement for something
to be present in the README file, it will not find it, as the instance
directory doesn't have it.

Have the tests check if the current directory is an instance directory,
and if it is, check two directories above the current directory for the
README file:

  /sys/kernel/tracing/README
  /sys/kernel/tracing/instances/foo/../../README

Link: https://lore.kernel.org/r/20250220185846.130216270@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2025-02-20 13:15:01 -07:00
Lukasz Luba
a29ba0023d MAINTAINERS: Add Energy Model framework as properly maintained
The Energy Model framework had some recent grow and became a bit
more complex. Add the proper contact points to maintainers so
other developers can get the right support.

Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/20250220114103.515278-1-lukasz.luba@arm.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-02-20 20:56:25 +01:00
Li RongQing
1618f635bd PM: EM: use kfree_rcu() to simplify the code
The callback function of call_rcu() just calls kfree(), so use
kfree_rcu() instead of call_rcu() + callback function.

Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/20250218082021.2766-1-lirongqing@baidu.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-02-20 20:53:34 +01:00
Michal Simek
7526e4fe55 dt-bindings: trivial-devices: Add ti,tps546b24
Describe TPS546B24 DC-DC converter which is very similar to tps546d24
version. The difference is that B version handles up to 20A. D version up
to 40A.

Signed-off-by: Michal Simek <michal.simek@amd.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/c79f69d0d37e7eb61f93f5dea69148b7756a3ee5.1740056021.git.michal.simek@amd.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
2025-02-20 13:35:14 -06:00
Jie Zhan
3698dd6b13 cpufreq: governor: Fix negative 'idle_time' handling in dbs_update()
We observed an issue that the CPU frequency can't raise up with a 100% CPU
load when NOHZ is off and the 'conservative' governor is selected.

'idle_time' can be negative if it's obtained from get_cpu_idle_time_jiffy()
when NOHZ is off.  This was found and explained in commit 9485e4ca0b
("cpufreq: governor: Fix handling of special cases in dbs_update()").

However, commit 7592019634 ("cpufreq: governors: Fix long idle detection
logic in load calculation") introduced a comparison between 'idle_time' and
'samling_rate' to detect a long idle interval.  While 'idle_time' is
converted to int before comparison, it's actually promoted to unsigned
again when compared with an unsigned 'sampling_rate'.  Hence, this leads to
wrong idle interval detection when it's in fact 100% busy and sets
policy_dbs->idle_periods to a very large value.  'conservative' adjusts the
frequency to minimum because of the large 'idle_periods', such that the
frequency can't raise up.  'Ondemand' doesn't use policy_dbs->idle_periods
so it fortunately avoids the issue.

Correct negative 'idle_time' to 0 before any use of it in dbs_update().

Fixes: 7592019634 ("cpufreq: governors: Fix long idle detection logic in load calculation")
Signed-off-by: Jie Zhan <zhanjie9@hisilicon.com>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Link: https://patch.msgid.link/20250213035510.2402076-1-zhanjie9@hisilicon.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2025-02-20 20:27:19 +01:00
Maarten Lankhorst
511a3444f7 MAINTAINERS: Add entry for DMEM cgroup controller
The cgroups controller is currently maintained through the
drm-misc tree, so lets add Maxime Ripard, Natalie Vock
and me as specific maintainers for dmem.

We keep the cgroup mailing list CC'd on all cgroup specific patches.

Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Natalie Vock <natalie.vock@gmx.de>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Koutný <mkoutny@suse.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250220140757.16823-1-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
2025-02-20 19:58:24 +01:00
Mario Limonciello
b47834ee44
ASoC: SOF: amd: Add depends on CPU_SUP_AMD
When SMN support was switched to the kernel wide AMD_NODE instead of
local implementation this broke compilation on the allyesconfig for
some architectures.  AMD_NODE is only supported on AMD platforms, so
modify all the AMD drivers that use it to also require CPU_SUP_AMD.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20250220160950.2cd64bdb@canb.auug.org.au/
Fixes: f120cf33d2 ("ASoC: SOF: amd: Use AMD_NODE")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20250220184822.916090-1-superm1@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-02-20 18:54:09 +00:00
Jakub Kicinski
5d6ba5ab85 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR (net-6.14-rc4).

No conflicts or adjacent changes.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-20 10:37:30 -08:00
Luiz Augusto von Dentz
b25120e1d5 Bluetooth: L2CAP: Fix L2CAP_ECRED_CONN_RSP response
L2CAP_ECRED_CONN_RSP needs to respond DCID in the same order received as
SCID but the order is reversed due to use of list_add which actually
prepend channels to the list so the response is reversed:

> ACL Data RX: Handle 16 flags 0x02 dlen 26
      LE L2CAP: Enhanced Credit Connection Request (0x17) ident 2 len 18
        PSM: 39 (0x0027)
        MTU: 256
        MPS: 251
        Credits: 65535
        Source CID: 116
        Source CID: 117
        Source CID: 118
        Source CID: 119
        Source CID: 120
< ACL Data TX: Handle 16 flags 0x00 dlen 26
      LE L2CAP: Enhanced Credit Connection Response (0x18) ident 2 len 18
        MTU: 517
        MPS: 247
        Credits: 3
        Result: Connection successful (0x0000)
        Destination CID: 68
        Destination CID: 67
        Destination CID: 66
        Destination CID: 65
        Destination CID: 64

Also make sure the response don't include channels that are not on
BT_CONNECT2 since the chan->ident can be set to the same value as in the
following trace:

< ACL Data TX: Handle 16 flags 0x00 dlen 12
      LE L2CAP: LE Flow Control Credit (0x16) ident 6 len 4
        Source CID: 64
        Credits: 1
...
> ACL Data RX: Handle 16 flags 0x02 dlen 18
      LE L2CAP: Enhanced Credit Connection Request (0x17) ident 6 len 10
        PSM: 39 (0x0027)
        MTU: 517
        MPS: 251
        Credits: 255
        Source CID: 70
< ACL Data TX: Handle 16 flags 0x00 dlen 20
      LE L2CAP: Enhanced Credit Connection Response (0x18) ident 6 len 12
        MTU: 517
        MPS: 247
        Credits: 3
        Result: Connection successful (0x0000)
        Destination CID: 64
        Destination CID: 68

Closes: https://github.com/bluez/bluez/issues/1094
Fixes: 9aa9d9473f ("Bluetooth: L2CAP: Fix responding with wrong PDU type")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-02-20 13:25:11 -05:00
Hsin-chen Chuang
bd30e8d7bf Bluetooth: Always allow SCO packets for user channel
The SCO packets from Bluetooth raw socket are now rejected because
hci_conn_num is left 0. This patch allows such the usecase to enable
the userspace SCO support.

Fixes: b16b327edb ("Bluetooth: btusb: add sysfs attribute to control USB alt setting")
Signed-off-by: Hsin-chen Chuang <chharry@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2025-02-20 13:25:08 -05:00
Linus Torvalds
27eddbf344 Smaller than usual with no fixes from any subtree.
Current release - regressions:
 
   - core: fix race of rtnl_net_lock(dev_net(dev)).
 
 Previous releases - regressions:
 
   - core: remove the single page frag cache for good
 
   - flow_dissector: fix handling of mixed port and port-range keys
 
   - sched: cls_api: fix error handling causing NULL dereference
 
   - tcp:
     - adjust rcvq_space after updating scaling ratio
     - drop secpath at the same time as we currently drop dst
 
   - eth: gtp: suppress list corruption splat in gtp_net_exit_batch_rtnl().
 
 Previous releases - always broken:
 
   - vsock:
     - fix variables initialization during resuming
     - for connectible sockets allow only connected
 
   - eth: geneve: fix use-after-free in geneve_find_dev().
 
   - eth: ibmvnic: don't reference skb after sending to VIOS
 
 Signed-off-by: Paolo Abeni <pabeni@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAme3Dc0SHHBhYmVuaUBy
 ZWRoYXQuY29tAAoJECkkeY3MjxOkQToQAKKTNLnFkYGFevxOukoZtU1l4ZOiaavg
 FlSsCVQrXfOvq5tIbkT7X86F3jYBNElNHvSDAFNQu5ZayEjqJHljSQE17rVVhepX
 Gvo9Jfk/ERwwd9vD78+KSvGMzSYAiIFoZmgLjaNyiFH53gMku8K41NRQAI2EeUzG
 G7lK/XYHvp/N7Ikt6ZMTFFW5NH7Wt2oeKZ8DbNBhK9+9lCet4s6PWzmGYrYkGUyy
 0iuYh09tKCGrBH0BpHMIGokqttVawjdg4tCJUMXurVoOWus0dKXuIdpKQuCdm8jO
 lV89xotE7Icw9CJTFQQZNn2C94J3RL4xtqo4fOuO1ztll+ma/nbPp9lJgy2P1WRI
 DqWJart1YuzC4Ef1NQiNeqRjxKoLDHbuu2A1zdAHMyHxZsKaQWowhhjylQLYsU3N
 d0WHlo43VQf95wx9cqdsGmEopk5YPLqBS1Wz/uL/m7y/+dmK4nKCcmqhIQ1QG23L
 SOhuOmHDs3mDkXusxr7NULCwGzjy3rPSExGrM68kiDEUX7cWFvVGmrRHf2bBiv7A
 gJ6UZ3J4au477adHjj2lBn3n1iIQDSN04gjPYKjunSEaMI2nqr55dN/aAnKFTjtm
 fMPXMWOHDfkjtX0iV69/345dXyzL5r4JHNwtTwoLx1QRMm6WoznJveHI6qXQ1RGb
 HdG8y9A9ZfLn
 =pEjU
 -----END PGP SIGNATURE-----

Merge tag 'net-6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Paolo Abeni:
 "Smaller than usual with no fixes from any subtree.

  Current release - regressions:

   - core: fix race of rtnl_net_lock(dev_net(dev))

  Previous releases - regressions:

   - core: remove the single page frag cache for good

   - flow_dissector: fix handling of mixed port and port-range keys

   - sched: cls_api: fix error handling causing NULL dereference

   - tcp:
       - adjust rcvq_space after updating scaling ratio
       - drop secpath at the same time as we currently drop dst

   - eth: gtp: suppress list corruption splat in gtp_net_exit_batch_rtnl().

  Previous releases - always broken:

   - vsock:
       - fix variables initialization during resuming
       - for connectible sockets allow only connected

   - eth:
       - geneve: fix use-after-free in geneve_find_dev()
       - ibmvnic: don't reference skb after sending to VIOS"

* tag 'net-6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (34 commits)
  Revert "net: skb: introduce and use a single page frag cache"
  net: allow small head cache usage with large MAX_SKB_FRAGS values
  nfp: bpf: Add check for nfp_app_ctrl_msg_alloc()
  tcp: drop secpath at the same time as we currently drop dst
  net: axienet: Set mac_managed_pm
  arp: switch to dev_getbyhwaddr() in arp_req_set_public()
  net: Add non-RCU dev_getbyhwaddr() helper
  sctp: Fix undefined behavior in left shift operation
  selftests/bpf: Add a specific dst port matching
  flow_dissector: Fix port range key handling in BPF conversion
  selftests/net/forwarding: Add a test case for tc-flower of mixed port and port-range
  flow_dissector: Fix handling of mixed port and port-range keys
  geneve: Suppress list corruption splat in geneve_destroy_tunnels().
  gtp: Suppress list corruption splat in gtp_net_exit_batch_rtnl().
  dev: Use rtnl_net_dev_lock() in unregister_netdev().
  net: Fix dev_net(dev) race in unregister_netdevice_notifier_dev_net().
  net: Add net_passive_inc() and net_passive_dec().
  net: pse-pd: pd692x0: Fix power limit retrieval
  MAINTAINERS: trim the GVE entry
  gve: set xdp redirect target only when it is available
  ...
2025-02-20 10:19:54 -08:00
Haoxiang Li
860ca5e50f smb: client: Add check for next_buffer in receive_encrypted_standard()
Add check for the return value of cifs_buf_get() and cifs_small_buf_get()
in receive_encrypted_standard() to prevent null pointer dereference.

Fixes: eec04ea119 ("smb: client: fix OOB in receive_encrypted_standard()")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2025-02-20 12:10:39 -06:00
Yiwei Lin
80d3175a7e cpupower: monitor: Exit with error status if execvp() fail
In the case that we give a invalid command to idle_monitor for
monitoring, the execvp() will fail and thus go to the next line.
As a result, we'll see two differnt monitoring output. For
example, running `cpupower monitor -i 5 invalidcmd` which `invalidcmd`
is not executable.

Link: https://lore.kernel.org/r/20250220163846.2765-1-s921975628@gmail.com
Signed-off-by: Yiwei Lin <s921975628@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2025-02-20 10:38:14 -07:00
Daniel Wagner
d2fe192348 nvme: only allow entering LIVE from CONNECTING state
The fabric transports and also the PCI transport are not entering the
LIVE state from NEW or RESETTING. This makes the state machine more
restrictive and allows to catch not supported state transitions, e.g.
directly switching from RESETTING to LIVE.

Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
2025-02-20 09:14:25 -08:00
Daniel Wagner
f13409bb3f nvme-fc: rely on state transitions to handle connectivity loss
It's not possible to call nvme_state_ctrl_state with holding a spin
lock, because nvme_state_ctrl_state calls cancel_delayed_work_sync
when fastfail is enabled.

Instead syncing the ASSOC_FLAG and state transitions using a lock, it's
possible to only rely on the state machine transitions. That means
nvme_fc_ctrl_connectivity_loss should unconditionally call
nvme_reset_ctrl which avoids the read race on the ctrl state variable.
Actually, it's not necessary to test in which state the ctrl is, the
reset work will only scheduled when the state machine is in LIVE state.

In nvme_fc_create_association, the LIVE state can only be entered if it
was previously CONNECTING. If this is not possible then the reset
handler got triggered. Thus just error out here.

Fixes: ee59e3820c ("nvme-fc: do not ignore connectivity loss during connecting")
Closes: https://lore.kernel.org/all/denqwui6sl5erqmz2gvrwueyxakl5txzbbiu3fgebryzrfxunm@iwxuthct377m/
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
2025-02-20 09:13:55 -08:00
Dmitry Panchenko
9af3b4f2d8 ALSA: usb-audio: Re-add sample rate quirk for Pioneer DJM-900NXS2
Re-add the sample-rate quirk for the Pioneer DJM-900NXS2. This
device does not work without setting sample-rate.

Signed-off-by: Dmitry Panchenko <dmitry@d-systems.ee>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250220161540.3624660-1-dmitry@d-systems.ee
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-02-20 18:05:56 +01:00
Linus Torvalds
e9a8cac0bf Five SMB client fixes
-----BEGIN PGP SIGNATURE-----
 
 iQGzBAABCgAdFiEE6fsu8pdIjtWE/DpLiiy9cAdyT1EFAme2g0oACgkQiiy9cAdy
 T1Ho0QwAqnmeBvEtAeRBoOO+iKNe3WJy4xKfZA4vJMRWcd99jt7j81q/hZDxPTNW
 9x3HPivjMsCOrFSXP6EFRTwiaOXvx4GH+iMejVc7odhfD4Vs9hESvdH61ob1DoXi
 3O7hMkA/X3bhy7j7+JS3ellHV6GLylOITnI+6RUBP12f5i+JVWndf4+umj+RcesL
 igdgveN748HSm6zN7aOQzvcDQhW+oamgq5GppPnjWbVeRStCvK51VuvpYM0PtbW6
 7EEh5nQMGdeDe6L2JWVrJNZF4owVuxXzbdUv8zblDStTWeevBnDJgjv2NgW6msP/
 r+8IqSu4C6XaDdriQO4rV0HBivR3Vt/VDZvRkSniBqJIj9uoedaiZaAZz8oYgXkF
 uCJbq+Z3pJojm5KcutcvSmYYbPS4Gzck6B4QQbz/3uIuTRXCvoRUZohnrUPm4Jdl
 Iv3ImO34Q0ScbriNQBmnBmzSvgmSSoTlNpsHPqd4bGNTCxJ+uZMChG1x3cK+AhhH
 g/XOMOOi
 =nwa3
 -----END PGP SIGNATURE-----

Merge tag 'v6.14-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull smb client fixes from Steve French:

 - Fix for chmod regression

 - Two reparse point related fixes

 - One minor cleanup (for GCC 14 compiles)

 - Fix for SMB3.1.1 POSIX Extensions reporting incorrect file type

* tag 'v6.14-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Treat unhandled directory name surrogate reparse points as mount directory nodes
  cifs: Throw -EOPNOTSUPP error on unsupported reparse point type from parse_reparse_point()
  smb311: failure to open files of length 1040 when mounting with SMB3.1.1 POSIX extensions
  smb: client, common: Avoid multiple -Wflex-array-member-not-at-end warnings
  smb: client: fix chmod(2) regression with ATTR_READONLY
2025-02-20 08:59:00 -08:00
Linus Torvalds
bf0e5ed008 bcachefs fixes for 6.14-rc4
Small stuff:
 
 - The fsck code for Hongbo's directory i_size patch was wrong, caught by
   transaction restart injection: we now have the CI running another test
   variant with restart injection enabled
 
 - Another fixup for reflink pointers to missing indirect extents:
   previous fix was for fsck code, this fixes the normal runtime paths
 
 - Another small srcu lock hold time fix, reported by jpsollie
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEKnAFLkS8Qha+jvQrE6szbY3KbnYFAme3OyoACgkQE6szbY3K
 bnaXTRAAuF+EL1MxMkyuIUEfTuAiE6wx26bf0C/pmgY/roALSY6lVFEnlbs2mpti
 1z2uR4pnX06e27R9pDxzuSrkq12/+7ltuFQ6om/tgeGma+mwY0iLWClmhvj4U3Cw
 HX0sYseE56wQGRRv10qVA77sYyjum6Fevci02XplL+Qx4nl/BUabTF+3KnkgL4Tq
 LHFm70DsYItPdEW3a16mW+oiHpr35ADPcJX4UkvSU/QZd7WK5Ei+IVICsBkcsX52
 CMxoWOxTlKRGRMbXD9kw2Oh6nliT0A/ErtYPIo/AJwFQVEqTloE2h/QotwkwRqzl
 MphypWZVX6umlJ7aq5fPhCRw9/UFwK9sv0/jY8TvkEQEuNi3+/5UbcumwYh6ZGVV
 pJS540sqoPQVTW/g6fxbEsUf+4/yTs3wawTlDlls/PKwj33s8fHDFvf4511kc9Wc
 mRAVcfwJelDmsEclELQsA2sZ4kUEQS90YZWLquozCU3L7TrfKiysUgONizBkVBtO
 PInTypH1uWlSZaacicozXmCJ/vBWC6JSliSz9HhSZQ0/KpSQNSX+IyCU9D+EMCtt
 WGMB9mQoyKyjThGgtecCxVNJi8c3Oe4Ll4Av21F+GXi0QPTt95G2hAVkX9gc3T4o
 DGKc9DRRPqShjgjImi7K3zRUH+BGaFiMWG8Q6PavPhZGAOMuiFM=
 =Yozy
 -----END PGP SIGNATURE-----

Merge tag 'bcachefs-2025-02-20' of git://evilpiepirate.org/bcachefs

Pull bcachefs fixes from Kent Overstreet:
 "Small stuff:

   - The fsck code for Hongbo's directory i_size patch was wrong, caught
     by transaction restart injection: we now have the CI running
     another test variant with restart injection enabled

   - Another fixup for reflink pointers to missing indirect extents:
     previous fix was for fsck code, this fixes the normal runtime paths

   - Another small srcu lock hold time fix, reported by jpsollie"

* tag 'bcachefs-2025-02-20' of git://evilpiepirate.org/bcachefs:
  bcachefs: Fix srcu lock warning in btree_update_nodes_written()
  bcachefs: Fix bch2_indirect_extent_missing_error()
  bcachefs: Fix fsck directory i_size checking
2025-02-20 08:51:57 -08:00
Linus Torvalds
770b7eec04 XFS: Fixes for 6.14-rc4
-----BEGIN PGP SIGNATURE-----
 
 iJUEABMJAB0WIQSmtYVZ/MfVMGUq1GNcsMJ8RxYuYwUCZ7Wo6gAKCRBcsMJ8RxYu
 Y9HaAYDN4tE42EfG1U60xfNiaIHG2fsEb3zlHrm0Hha0U0bmZgUvDFuGfS1VztVq
 a5RkVIYBf0BlWvLR30u6Sku6Zb+pHYAFbcImAIQymrKMAnKfADmN23VIbYTDcWTF
 LZ1PRt3Mkg==
 =K9n1
 -----END PGP SIGNATURE-----

Merge tag 'xfs-fixes-6.14-rc4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux

Pull xfs fixes from Carlos Maiolino:
 "Just a collection of bug fixes, nothing really stands out"

* tag 'xfs-fixes-6.14-rc4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: flush inodegc before swapon
  xfs: rename xfs_iomap_swapfile_activate to xfs_vm_swap_activate
  xfs: Do not allow norecovery mount with quotacheck
  xfs: do not check NEEDSREPAIR if ro,norecovery mount.
  xfs: fix data fork format filtering during inode repair
  xfs: fix online repair probing when CONFIG_XFS_ONLINE_REPAIR=n
2025-02-20 08:48:55 -08:00
Biju Das
9b12504e8c clk: renesas: r9a09g047: Add CANFD clocks and resets
Add CANFD clock and reset entries.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250218105007.66358-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-02-20 17:42:03 +01:00
Tommaso Merciai
037800c252 clk: renesas: r9a09g047: Add CRU0 clocks and resets
Add support for CRU0 clocks and resets along with the corresponding
divider.

Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250210114540.524790-2-tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-02-20 17:42:00 +01:00
Dzmitry Sankouski
aebb5fc9a0 leds: max77705: Add LEDs support
This adds basic support for LEDs for the max77705 PMIC.

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250123-starqltechn_integration_upstream-v17-7-8b06685b6612@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
2025-02-20 16:38:37 +00:00
John Madieu
25a5246b0e soc: renesas: r9a09g057-sys: Add a callback to print SoC-specific extra features
Some RZ/V2H SoC variants feature a Mali-G31 (GPU) and/or a Mali-C55
(ISP) IP(s).  Detect and inform about their presence during SoC
identification.  Also detect PLL frequency and warn in case of mismatch.

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Link: https://lore.kernel.org/20250128031342.52675-6-john.madieu.xa@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-02-20 17:38:33 +01:00
John Madieu
4300f38467 soc: renesas: rz-sysc: Move RZ/V2H SoC detection to the SYS driver
As per the other SoC variant of the same family, the system controller
provides SoC ID in its own registers.

Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250128031342.52675-5-john.madieu.xa@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-02-20 17:38:33 +01:00
John Madieu
d07470cff5 soc: renesas: rz-sysc: Add support for RZ/G3E family
Add SoC detection support for the RZ/G3E SoC.  Also add support for
detecting the number of cores and the ETHOS-U55 NPU, and also detect PLL
mismatch for SW settings other than 1.7GHz.

Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250128031342.52675-4-john.madieu.xa@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-02-20 17:38:33 +01:00
Claudiu Beznea
0704de89ee soc: renesas: rz-sysc: Move RZ/G3S SoC detection to the SYSC driver
Now that we have SoC detection in the RZ SYSC driver, move the RZ/G3S
SoC detection to it. The SYSC provides SoC ID in its own registers.

Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Link: https://lore.kernel.org/20250128031342.52675-3-john.madieu.xa@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-02-20 17:38:33 +01:00
Claudiu Beznea
c1aca55882 soc: renesas: Add SYSC driver for Renesas RZ family
The RZ/G3S system controller (SYSC) has various registers that control
different functionalities.  One of the exposed register offers
information about the SoC identification.

Add a driver that identifies the SoC.  Later the driver will be extended
with other functionalities.

Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250128031342.52675-2-john.madieu.xa@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-02-20 17:38:33 +01:00
Dzmitry Sankouski
eb79f3a5a5 Input: max77693 - add max77705 haptic support
Add support for haptic controller on MAX77705 Multifunction
device.

This driver supports external pwm and LRA (Linear Resonant Actuator) motor.
User can control the haptic device via force feedback framework.

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250123-starqltechn_integration_upstream-v17-6-8b06685b6612@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
2025-02-20 16:37:47 +00:00
Dzmitry Sankouski
c8d50f0297 mfd: Add new driver for MAX77705 PMIC
Add the core MFD driver for max77705 PMIC. Drivers for sub-devices
will be added in subsequent patches.

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250123-starqltechn_integration_upstream-v17-5-8b06685b6612@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
2025-02-20 16:37:40 +00:00
Dzmitry Sankouski
7b591ef98b mfd: simple-mfd-i2c: Add MAX77705 support
Add MAX77705 support - fuel gauge and hwmon devices.
Hwmon provides charger input and system bus measurements.

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250123-starqltechn_integration_upstream-v17-4-8b06685b6612@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
2025-02-20 16:37:33 +00:00
Dzmitry Sankouski
a6a494c8e3 power: supply: max77705: Add charger driver for Maxim 77705
Add driver for Maxim 77705 switch-mode charger.
It providing power supply class information to userspace.

The driver is configured through DTS (battery and system related
settings).

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250123-starqltechn_integration_upstream-v17-3-8b06685b6612@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
2025-02-20 16:37:23 +00:00
Dzmitry Sankouski
2ae4ffff28 dt-bindings: mfd: Add maxim,max77705
Add maxim,max77705 binding part, containing leds controller and haptics.
Charger and fuel gauge are separate device, thus not included.

Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250123-starqltechn_integration_upstream-v17-2-8b06685b6612@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
2025-02-20 16:37:02 +00:00
Dzmitry Sankouski
af280f29f3 dt-bindings: power: supply: add maxim,max77705 charger
Add maxim,max77705 charger binding.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250123-starqltechn_integration_upstream-v17-1-8b06685b6612@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
2025-02-20 16:36:34 +00:00
Claudiu Beznea
ea40653456 pinctrl: renesas: rzg2l: Suppress binding attributes
Suppress binding attributes for the rzg2l pinctrl driver, as it is an
essential block for Renesas SoCs.  Unbinding the driver leads to
warnings from __device_links_no_driver() and can eventually render the
system inaccessible.

Fixes: c4c4637eb5 ("pinctrl: renesas: Add RZ/G2L pin and gpio controller driver")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250215131235.228274-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-02-20 17:33:08 +01:00
Dave Kleikamp
0d250b1c52 fs/jfs: consolidate sanity checking in dbMount
Sanity checks have been added to dbMount as individual if clauses with
identical error handling. Move these all into one clause.

Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
2025-02-20 10:31:19 -06:00
Oliver Upton
fa808ed4e1 KVM: arm64: Ensure a VMID is allocated before programming VTTBR_EL2
Vladimir reports that a race condition to attach a VMID to a stage-2 MMU
sometimes results in a vCPU entering the guest with a VMID of 0:

| CPU1                                            |   CPU2
|                                                 |
|                                                 | kvm_arch_vcpu_ioctl_run
|                                                 |   vcpu_load             <= load VTTBR_EL2
|                                                 |                            kvm_vmid->id = 0
|                                                 |
| kvm_arch_vcpu_ioctl_run                         |
|   vcpu_load             <= load VTTBR_EL2       |
|                            with kvm_vmid->id = 0|
|   kvm_arm_vmid_update   <= allocates fresh      |
|                            kvm_vmid->id and     |
|                            reload VTTBR_EL2     |
|                                                 |
|                                                 |   kvm_arm_vmid_update <= observes that kvm_vmid->id
|                                                 |                          already allocated,
|                                                 |                          skips reload VTTBR_EL2

Oh yeah, it's as bad as it looks. Remember that VHE loads the stage-2
MMU eagerly but a VMID only gets attached to the MMU later on in the
KVM_RUN loop.

Even in the "best case" where VTTBR_EL2 correctly gets reprogrammed
before entering the EL1&0 regime, there is a period of time where
hardware is configured with VMID 0. That's completely insane. So, rather
than decorating the 'late' binding with another hack, just allocate the
damn thing up front.

Attaching a VMID from vcpu_load() is still rollover safe since
(surprise!) it'll always get called after a vCPU was preempted.

Excuse me while I go find a brown paper bag.

Cc: stable@vger.kernel.org
Fixes: 934bf871f0 ("KVM: arm64: Load the stage-2 MMU context in kvm_vcpu_load_vhe()")
Reported-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250219220737.130842-1-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
2025-02-20 16:29:28 +00:00