Add AXP717_TS_PIN_CFG (register 0x50) to the table of writeable
registers so that the temperature sensor can be configured by the
battery driver.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20250204155835.161973-3-macroalpha82@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
syzbot report a deadlock in diFree. [1]
When calling "ioctl$LOOP_SET_STATUS64", the offset value passed in is 4,
which does not match the mounted loop device, causing the mapping of the
mounted loop device to be invalidated.
When creating the directory and creating the inode of iag in diReadSpecial(),
read the page of fixed disk inode (AIT) in raw mode in read_metapage(), the
metapage data it returns is corrupted, which causes the nlink value of 0 to be
assigned to the iag inode when executing copy_from_dinode(), which ultimately
causes a deadlock when entering diFree().
To avoid this, first check the nlink value of dinode before setting iag inode.
[1]
WARNING: possible recursive locking detected
6.12.0-rc7-syzkaller-00212-g4a5df3796467 #0 Not tainted
--------------------------------------------
syz-executor301/5309 is trying to acquire lock:
ffff888044548920 (&(imap->im_aglock[index])){+.+.}-{3:3}, at: diFree+0x37c/0x2fb0 fs/jfs/jfs_imap.c:889
but task is already holding lock:
ffff888044548920 (&(imap->im_aglock[index])){+.+.}-{3:3}, at: diAlloc+0x1b6/0x1630
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&(imap->im_aglock[index]));
lock(&(imap->im_aglock[index]));
*** DEADLOCK ***
May be due to missing lock nesting notation
5 locks held by syz-executor301/5309:
#0: ffff8880422a4420 (sb_writers#9){.+.+}-{0:0}, at: mnt_want_write+0x3f/0x90 fs/namespace.c:515
#1: ffff88804755b390 (&type->i_mutex_dir_key#6/1){+.+.}-{3:3}, at: inode_lock_nested include/linux/fs.h:850 [inline]
#1: ffff88804755b390 (&type->i_mutex_dir_key#6/1){+.+.}-{3:3}, at: filename_create+0x260/0x540 fs/namei.c:4026
#2: ffff888044548920 (&(imap->im_aglock[index])){+.+.}-{3:3}, at: diAlloc+0x1b6/0x1630
#3: ffff888044548890 (&imap->im_freelock){+.+.}-{3:3}, at: diNewIAG fs/jfs/jfs_imap.c:2460 [inline]
#3: ffff888044548890 (&imap->im_freelock){+.+.}-{3:3}, at: diAllocExt fs/jfs/jfs_imap.c:1905 [inline]
#3: ffff888044548890 (&imap->im_freelock){+.+.}-{3:3}, at: diAllocAG+0x4b7/0x1e50 fs/jfs/jfs_imap.c:1669
#4: ffff88804755a618 (&jfs_ip->rdwrlock/1){++++}-{3:3}, at: diNewIAG fs/jfs/jfs_imap.c:2477 [inline]
#4: ffff88804755a618 (&jfs_ip->rdwrlock/1){++++}-{3:3}, at: diAllocExt fs/jfs/jfs_imap.c:1905 [inline]
#4: ffff88804755a618 (&jfs_ip->rdwrlock/1){++++}-{3:3}, at: diAllocAG+0x869/0x1e50 fs/jfs/jfs_imap.c:1669
stack backtrace:
CPU: 0 UID: 0 PID: 5309 Comm: syz-executor301 Not tainted 6.12.0-rc7-syzkaller-00212-g4a5df3796467 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_deadlock_bug+0x483/0x620 kernel/locking/lockdep.c:3037
check_deadlock kernel/locking/lockdep.c:3089 [inline]
validate_chain+0x15e2/0x5920 kernel/locking/lockdep.c:3891
__lock_acquire+0x1384/0x2050 kernel/locking/lockdep.c:5202
lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5825
__mutex_lock_common kernel/locking/mutex.c:608 [inline]
__mutex_lock+0x136/0xd70 kernel/locking/mutex.c:752
diFree+0x37c/0x2fb0 fs/jfs/jfs_imap.c:889
jfs_evict_inode+0x32d/0x440 fs/jfs/inode.c:156
evict+0x4e8/0x9b0 fs/inode.c:725
diFreeSpecial fs/jfs/jfs_imap.c:552 [inline]
duplicateIXtree+0x3c6/0x550 fs/jfs/jfs_imap.c:3022
diNewIAG fs/jfs/jfs_imap.c:2597 [inline]
diAllocExt fs/jfs/jfs_imap.c:1905 [inline]
diAllocAG+0x17dc/0x1e50 fs/jfs/jfs_imap.c:1669
diAlloc+0x1d2/0x1630 fs/jfs/jfs_imap.c:1590
ialloc+0x8f/0x900 fs/jfs/jfs_inode.c:56
jfs_mkdir+0x1c5/0xba0 fs/jfs/namei.c:225
vfs_mkdir+0x2f9/0x4f0 fs/namei.c:4257
do_mkdirat+0x264/0x3a0 fs/namei.c:4280
__do_sys_mkdirat fs/namei.c:4295 [inline]
__se_sys_mkdirat fs/namei.c:4293 [inline]
__x64_sys_mkdirat+0x87/0xa0 fs/namei.c:4293
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Reported-by: syzbot+355da3b3a74881008e8f@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=355da3b3a74881008e8f
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
st1202_led_set function now uses the !! operator to convert the
enum led_brightness() value to a boolean active state, which is then
passed to the st1202_channel_set() function. This change maintains the
existing functionality.
cocci warnings:
drivers/leds/leds-st1202.c:194:66-71: WARNING: conversion to bool not needed here.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202502181845.xESVrC61-lkp@intel.com/
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Link: https://lore.kernel.org/r/tencent_3DF7518D407679C99C4CCCB1B8E64638700A@qq.com
Signed-off-by: Lee Jones <lee@kernel.org>
Herd7 transforms successful RMW with Mb tags by inserting smp_mb() fences
around them. We emulate this by considering imaginary po-edges before the
RMW read and before the RMW write, and extending the smp_mb() ordering
rule, which currently only applies to real po edges that would be found
around a really inserted smp_mb(), also to cases of the only imagined po
edges.
Reported-by: Viktor Vafeiadis <viktor@mpi-sws.org>
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jonas Oberhauser <jonas.oberhauser@huaweicloud.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Tested-by: Boqun Feng <boqun.feng@gmail.com>
Herd7 transforms reads, writes, and read-modify-writes by eliminating
'acquire tags from writes, 'release tags from reads, and 'acquire,
'release, and 'mb tags from failed read-modify-writes. We emulate this
behavior by redefining Acquire, Release, and Mb sets in linux-kernel.bell
to explicitly exclude those combinations.
Herd7 furthermore adds 'noreturn tag to certain reads. Currently herd7
does not allow specifying the 'noreturn tag manually, but such manual
declaration (e.g., through a syntax __atomic_op{noreturn}) would add
invalid 'noreturn tags to writes; in preparation, we already also exclude
this combination.
Signed-off-by: Jonas Oberhauser <jonas.oberhauser@huaweicloud.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Tested-by: Boqun Feng <boqun.feng@gmail.com>
The current macros in linux-kernel.def reference instructions such as
__xchg{mb} or __cmpxchg{acquire}, which are invalid combinations of tags
and instructions according to the declarations in linux-kernel.bell.
This works with current herd7 because herd7 removes these tags anyways
and does not actually enforce validity of combinations at all.
If a future herd7 version no longer applies these hardcoded
transformations, then all currently invalid combinations will actually
appear on some instruction.
We therefore adjust the declarations to make the resulting combinations
valid, by adding the 'mb tag to the set of Accesses and allowing all
Accesses to appear on all read, write, and RMW instructions.
Signed-off-by: Jonas Oberhauser <jonas.oberhauser@huaweicloud.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Tested-by: Boqun Feng <boqun.feng@gmail.com>
Pull-855[1] added the support of atomic_andnot() to the herd tool. Use
this to add the implementation in the LKMM. All of the ordering variants
are also added.
Here is a small litmus-test that uses this operation:
C andnot
{
atomic_t u = ATOMIC_INIT(7);
}
P0(atomic_t *u)
{
r0 = atomic_fetch_andnot(3, u);
r1 = READ_ONCE(*u);
}
exists (0:r0=7 /\ 0:r1=4)
Test andnot Allowed
States 1
0:r0=7; 0:r1=4;
Ok
Witnesses
Positive: 1 Negative: 0
Condition exists (0:r0=7 /\ 0:r1=4)
Observation andnot Always 1 0
Time andnot 0.00
Hash=78f011a0b5a0c65fa1cf106fcd62c845
[1] https://github.com/herd/herdtools7/pull/855
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Andrea Parri <parri.andrea@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Will Deacon <will@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jade Alglave <j.alglave@ucl.ac.uk>
Cc: Luc Maranget <luc.maranget@inria.fr>
Cc: Akira Yokosawa <akiyks@gmail.com>
Cc: Daniel Lustig <dlustig@nvidia.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: <linux-arch@vger.kernel.org>
Pull-849[1] added the support of '&', '|', and '^' to the herd7 tool's
atomics operations.
Use these in linux-kernel.def to implement atomic_and()/or()/xor() with
all their ordering variants.
atomic_add_negative() is already available so add its acquire, release,
and relaxed ordering variants.
[1] https://github.com/herd/herdtools7/pull/849
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Andrea Parri <parri.andrea@gmail.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Will Deacon <will@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jade Alglave <j.alglave@ucl.ac.uk>
Cc: Luc Maranget <luc.maranget@inria.fr>
Cc: Akira Yokosawa <akiyks@gmail.com>
Cc: Daniel Lustig <dlustig@nvidia.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: <linux-arch@vger.kernel.org>
The JFS filesystem calculates allocation group (AG) size using 1 <<
l2agsize in dbExtendFS(). When l2agsize exceeds 31 (possible with >2TB
aggregates on 32-bit systems), this 32-bit shift operation causes undefined
behavior and improper AG sizing.
On 32-bit architectures:
- Left-shifting 1 by 32+ bits results in 0 due to integer overflow
- This creates invalid AG sizes (0 or garbage values) in
sbi->bmap->db_agsize
- Subsequent block allocations would reference invalid AG structures
- Could lead to:
- Filesystem corruption during extend operations
- Kernel crashes due to invalid memory accesses
- Security vulnerabilities via malformed on-disk structures
Fix by casting to s64 before shifting:
bmp->db_agsize = (s64)1 << l2agsize;
This ensures 64-bit arithmetic even on 32-bit architectures. The cast
matches the data type of db_agsize (s64) and follows similar patterns in
JFS block calculation code.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Rand Deeb <rand.sec96@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
The expression "inactags << bmp->db_agl2size" in the function
dbFinalizeBmap() is computed using int operands. Although the
values (inactags and db_agl2size) are derived from filesystem
parameters and are usually small, there is a theoretical risk that
the shift could overflow a 32-bit int if extreme values occur.
According to the C standard, shifting a signed 32-bit int can lead
to undefined behavior if the result exceeds its range. In our
case, an overflow could miscalculate free blocks, potentially
leading to erroneous filesystem accounting.
To ensure the arithmetic is performed in 64-bit space, we cast
"inactags" to s64 before shifting. This defensive fix prevents any
risk of overflow and complies with kernel coding best practices.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Rand Deeb <rand.sec96@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
The PM8937 PWM modules are compatible with the PM8916 PWM modules,
document the PM8937 PWM compatible as fallback for the PM8916 PWM.
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250213-pm8937-pwm-v2-1-49ea59801a33@mainlining.org
Signed-off-by: Lee Jones <lee@kernel.org>
Add MAINTAINERS entries for the driver.
Reviewed-by: "Daniel Thompson (RISCstar)" <danielt@kernel.org>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Link: https://lore.kernel.org/r/20250214040306.16312-4-towinchenmi@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add driver for backlight controllers attached via Apple DWI 2-wire
interface, which is found on some Apple iPhones, iPads and iPod touches
with a LCD display.
Although there is an existing apple_bl driver, it is for backlight
controllers on Intel Macs attached via PCI, which is completely different
from the Samsung-derived DWI block.
Reviewed-by: "Daniel Thompson (RISCstar)" <danielt@kernel.org>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Link: https://lore.kernel.org/r/20250214040306.16312-3-towinchenmi@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
According to the latest event list, update the event constraint tables
for Lion Cove core.
The general rule (the event codes < 0x90 are restricted to counters
0-3.) has been removed. There is no restriction for most of the
performance monitoring events.
Fixes: a932aa0e86 ("perf/x86: Add Lunar Lake and Arrow Lake support")
Reported-by: Amiri Khalil <amiri.khalil@intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20250219141005.2446823-1-kan.liang@linux.intel.com
For existing epoll event loops that can't fully convert to io_uring,
the used approach is usually to add the io_uring fd to the epoll
instance and use epoll_wait() to wait on both "legacy" and io_uring
events. While this work, it isn't optimal as:
1) epoll_wait() is pretty limited in what it can do. It does not support
partial reaping of events, or waiting on a batch of events.
2) When an io_uring ring is added to an epoll instance, it activates the
io_uring "I'm being polled" logic which slows things down.
Rather than use this approach, with EPOLL_WAIT support added to io_uring,
event loops can use the normal io_uring wait logic for everything, as
long as an epoll wait request has been armed with io_uring.
Note that IORING_OP_EPOLL_WAIT does NOT take a timeout value, as this
is an async request. Waiting on io_uring events in general has various
timeout parameters, and those are the ones that should be used when
waiting on any kind of request. If events are immediately available for
reaping, then This opcode will return those immediately. If none are
available, then it will post an async completion when they become
available.
cqe->res will contain either an error code (< 0 value) for a malformed
request, invalid epoll instance, etc. It will return a positive result
indicating how many events were reaped.
IORING_OP_EPOLL_WAIT requests may be canceled using the normal io_uring
cancelation infrastructure.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just have the Makefile add the object if epoll is enabled, then it's
not necessary to guard the entire epoll.c file inside an CONFIG_EPOLL
ifdef.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge epoll changes from the VFS tree, which the io_uring changes depend
on.
* 'vfs-6.15.eventpoll' of https://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
eventpoll: add epoll_sendevents() helper
eventpoll: abstract out ep_try_send_events() helper
eventpoll: abstract out parameter sanity checking
The VF driver controls an endpoint attached to the PCI HyperV
controller. An invalidation sent by the PF driver in the host
would be delivered *to* the endpoint driver by the controller
driver.
Thus, correct the wording within the comment.
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20250207190716.89995-1-eahariha@linux.microsoft.com
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Pull MD fix from Yu:
"This patch, by Bart Van Assche, fixes queue limits error handling for
raid0, raid1 and raid10."
* tag 'md-6.14-20250218' of https://git.kernel.org/pub/scm/linux/kernel/git/mdraid/linux:
md/raid*: Fix the set_queue_limits implementations
Fuse allows the value of a symlink to change and this property is exploited
by some filesystems (e.g. CVMFS).
It has been observed, that sometimes after changing the symlink contents,
the value is truncated to the old size.
This is caused by fuse_getattr() racing with fuse_reverse_inval_inode().
fuse_reverse_inval_inode() updates the fuse_inode's attr_version, which
results in fuse_change_attributes() exiting before updating the cached
attributes
This is okay, as the cached attributes remain invalid and the next call to
fuse_change_attributes() will likely update the inode with the correct
values.
The reason this causes problems is that cached symlinks will be
returned through page_get_link(), which truncates the symlink to
inode->i_size. This is correct for filesystems that don't mutate
symlinks, but in this case it causes bad behavior.
The solution is to just remove this truncation. This can cause a
regression in a filesystem that relies on supplying a symlink larger than
the file size, but this is unlikely. If that happens we'd need to make
this behavior conditional.
Reported-by: Laura Promberger <laura.promberger@cern.ch>
Tested-by: Sam Lewis <samclewis@google.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Link: https://lore.kernel.org/r/20250220100258.793363-1-mszeredi@redhat.com
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/4a028a23126b3350a5e243dcb49e1ef1b2a4b740.1738746904.git.namcao@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/c21664d013015584aebbb6bb8cedd748182cb551.1738746904.git.namcao@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/ad27070bc67c13f8a9acbd5cbf4cbae72797e3e1.1738746904.git.namcao@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/78e8c0d1b38998eab983fad265751ed13c2b9009.1738746904.git.namcao@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/991926d130cc272df30d226760d5d74187991669.1738746904.git.namcao@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The field 'function' of struct hrtimer should not be changed directly, as
the write is lockless and a concurrent timer expiry might end up using the
wrong function pointer.
Switch to use hrtimer_update_function() which also performs runtime checks
that it is safe to modify the callback.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/af7823518fb060c6c97105a2513cfc61adbdf38f.1738746927.git.namcao@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fsl-spi.txt contains the bindings for the fsl,spi and fsl,espi
contollers. Convert them to YAML.
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Link: https://patch.msgid.link/20250220-ppcyaml-spi-v3-1-e340613c7875@posteo.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Describe that it tests the miscdevice API and include the usual disclaimer
about KUnit not being fit for production kernels.
While at it, also fix KUnit capitalization.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://lore.kernel.org/r/20250123123249.4081674-2-cascardo@igalia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Support blinking using the PCA955x chip. Use PWM0 for blinking
instead of LED_HALF brightness. Since there is only one frequency
and brightness register for any blinking LED, track the blink state
of each LED and only support one HW blinking frequency. If another
frequency is requested, fallback to software blinking. In addition,
blinked LEDs can only use full brightness in order to maintain 50%
duty cycle, which is required for the specified blink rate.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20250212143038.1416501-5-eajames@linux.ibm.com
Signed-off-by: Lee Jones <lee@kernel.org>
Previously, the probe function might do up to 32 reads and writes
to the same 4 registers to program the LED selection. Reduce this to
a maximum of 5 operations by accumulating the changes to the LED
selection and comparing with the previous value to write the
selection if different.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20250212143038.1416501-4-eajames@linux.ibm.com
Signed-off-by: Lee Jones <lee@kernel.org>
As a minor clean up item, pass the driver data pointer instead of the
I2C client to the reader and writer helper functions. Now the PCA
driver data doesn't have to be looked up again in the I2C client data
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20250212143038.1416501-3-eajames@linux.ibm.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add helper functions to clean up the code, and rename a few
oddly named functions and variables.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20250212143038.1416501-2-eajames@linux.ibm.com
Signed-off-by: Lee Jones <lee@kernel.org>
Like other eeprom drivers, check if the device is really there and
functional before probing.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20250218220959.721698-1-eajames@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
binder_internal.h is included only in the following two C files:
$ git grep binder_internal.h
drivers/android/binder.c:#include "binder_internal.h"
drivers/android/binderfs.c:#include "binder_internal.h"
Neither of these files use the EXPORT_SYMBOL macro, so including
<linux/export.h> is unnecessary.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20250217112756.1011333-1-masahiroy@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When compiling a kernel with GCC using `make W=1` with CONFIG_WERROR=y
(which is default nowadays), the build fails:
drivers/char/virtio_console.c:1427:9: note: ‘snprintf’ output between 9 and 27 bytes into a destination of size 16
Indeed, GCC can't see the limits of the variables that are in use.
Fix this by using dev_name() of the newly created device that is
luckily the same as the string used for the DebugFS node name.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Amit Shah <amit@kernel.org>
Link: https://lore.kernel.org/r/20250210095946.4122771-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove hard-coded strings by using the str_yes_no() helper function.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Amit Shah <amit@kernel.org>
Link: https://lore.kernel.org/r/20250212114841.74650-2-thorsten.blum@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The following functions have been in the mei code for
a long time but have never been used.
mei_txe_setup_satt2() was added in 2014 by
commit 32e2b59fca ("mei: txe: add hw-txe.c")
mei_me_cl_rm_by_uuid_id() was added in 2015 by
commit 79563db9dd ("mei: add reference counting for me clients")
mei_cldev_uuid() was added in 2015 by
commit baeacd0376 ("mei: bus: export uuid and protocol version to mei_cl
bus drivers")
mei_cldev_recv_nonblock() was added in 2016 by
commit 076802d006 ("mei: bus: enable non-blocking RX")
it is the only user of mei_cldev_recv_nonblock_vtag().
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://lore.kernel.org/r/20250130012654.255119-1-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The `startup_64` symbol and many other assembler symbols are not tagged.
Add a generic rule to tag assembler symbols defined with macros like
SYM_*START*(symbol).
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Link: https://lore.kernel.org/r/20250131155439.2025038-1-costa.shul@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add error handling for the gb_greybus_init(bg) function call
during the firmware reflash process to maintain consistency
in error handling throughout the codebase. If initialization
fails, log an error and return FW_UPLOAD_ERR_RW_ERROR.
Fixes: 0cf7befa3e ("greybus: gb-beagleplay: Add firmware upload API")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Ayush Singh <ayush@beagleboard.org>
Link: https://lore.kernel.org/r/20250120140547.1460-1-vulab@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The simple-pm-bus driver only enables runtime PM for some buses
('simple-pm-bus') yet has started calling pm_runtime_force_suspend() and
pm_runtime_force_resume() during system suspend unconditionally.
This currently works, but that is not obvious and depends on
implementation details which may change at some point.
Add dedicated system sleep ops and only call pm_runtime_force_suspend()
and pm_runtime_force_resume() for buses that use runtime PM to avoid any
future surprises.
Fixes: c45839309c ("drivers: bus: simple-pm-bus: Use clocks")
Cc: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250214102130.3000-1-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When creating sysfs files fail, the allocated minor must be freed such that
it can be later reused. That is specially harmful for static minor numbers,
since those would always fail to register later on.
Fixes: 6d04d2b554 ("misc: misc_minor_alloc to use ida for all dynamic/misc dynamic minors")
Cc: stable <stable@kernel.org>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://lore.kernel.org/r/20250123123249.4081674-5-cascardo@igalia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dev_id value in the GPIO lookup table must match to
the device instance name, which in this case is combined
of name and platform device ID, i.e. "spi_gpio.1". But
the table assumed that there was no platform device ID
defined, which is wrong. Fix the dev_id value accordingly.
Fixes: 9b00bc7b90 ("spi: spi-gpio: Rewrite to use GPIO descriptors")
Cc: stable <stable@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250206220311.1554075-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the "pmcmd_ioctl" function, three memory objects allocated by
kmalloc are initialized by "hcall_get_cpu_state", which are then
copied to user space. The initializer is indeed implemented in
"acrn_hypercall2" (arch/x86/include/asm/acrn.h). There is a risk of
information leakage due to uninitialized bytes.
Fixes: 3d679d5aec ("virt: acrn: Introduce interfaces to query C-states and P-states allowed by hypervisor")
Signed-off-by: Haoyu Li <lihaoyu499@gmail.com>
Cc: stable <stable@kernel.org>
Acked-by: Fei Li <fei1.li@intel.com>
Link: https://lore.kernel.org/r/20250130115811.92424-1-lihaoyu499@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>