Correct function comments to prevent kernel-doc warnings
found when using "W=1".
msu.c:162: warning: Function parameter or struct member 'mbuf_priv' not described in 'msc'
msu.c:164: warning: Function parameter or struct member 'orig_addr' not described in 'msc'
msu.c:164: warning: Function parameter or struct member 'orig_sz' not described in 'msc'
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lore.kernel.org/r/20250211185017.1759193-2-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xiumei reported hitting the WARN in xfrm6_tunnel_net_exit while
running tests that boil down to:
- create a pair of netns
- run a basic TCP test over ipcomp6
- delete the pair of netns
The xfrm_state found on spi_byaddr was not deleted at the time we
delete the netns, because we still have a reference on it. This
lingering reference comes from a secpath (which holds a ref on the
xfrm_state), which is still attached to an skb. This skb is not
leaked, it ends up on sk_receive_queue and then gets defer-free'd by
skb_attempt_defer_free.
The problem happens when we defer freeing an skb (push it on one CPU's
defer_list), and don't flush that list before the netns is deleted. In
that case, we still have a reference on the xfrm_state that we don't
expect at this point.
We already drop the skb's dst in the TCP receive path when it's no
longer needed, so let's also drop the secpath. At this point,
tcp_filter has already called into the LSM hooks that may require the
secpath, so it should not be needed anymore. However, in some of those
places, the MPTCP extension has just been attached to the skb, so we
cannot simply drop all extensions.
Fixes: 68822bdf76 ("net: generalize skb freeing deferral to per-cpu lists")
Reported-by: Xiumei Mu <xmu@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/5055ba8f8f72bdcb602faa299faca73c280b7735.1739743613.git.sd@queasysnail.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The external PHY will undergo a soft reset twice during the resume process
when it wake up from suspend. The first reset occurs when the axienet
driver calls phylink_of_phy_connect(), and the second occurs when
mdio_bus_phy_resume() invokes phy_init_hw(). The second soft reset of the
external PHY does not reinitialize the internal PHY, which causes issues
with the internal PHY, resulting in the PHY link being down. To prevent
this, setting the mac_managed_pm flag skips the mdio_bus_phy_resume()
function.
Fixes: a129b41fe0 ("Revert "net: phy: dp83867: perform soft reset and retain established link"")
Signed-off-by: Nick Hu <nick.hu@sifive.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250217055843.19799-1-nick.hu@sifive.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
========
- Use pci_try_reset_function() to reset the MHI function during recovery process
to avoid the deadlock reported on the X1E80100 CRD device. The deadlock can
happen if the caller has already acquired the 'device_lock()' while calling
the recovery function. So using pci_try_reset_function() avoids the deadlock
by returning -EAGAIN if the lock was already acquired.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZ6VDKoFIy9ikWCeXVZ8R5v6RzvUFAme2ypUACgkQVZ8R5v6R
zvWuKgf/eyQqHdgKU/v+FBF4g65bWj+EXYxwu8jhLxAsE1rlrwQSozHp7xb+RyNV
P92DGkfX+Dplm4hAUnZKhqzoGtKAdeuyjcvs5/+1O2lWMojxkQlT3EUEc7YRNmVI
aqFO+KaeqklF5HL8HOqkyFmiCoig9M63o4JWkjxyqTMFr2G3C671SAY5BSRVg6ms
9gV8j+8sI+DkElsSSd6/n3jibEplHx34g15HCstGoU5/rAke3Gl97l3mK7shbRC0
FORoTSH/L7CguLDJzQmi2nq9tQNflIR4YNaEHWhYbaSziDVYuQ+XB+mIZ7lGn/UD
3EqvKsJw5KS+7TvdhuiCi1k0V+26rA==
=DoWM
-----END PGP SIGNATURE-----
Merge tag 'mhi-fixes-for-v6.14' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-misc-linus
Manivannan writes:
MHI Host
========
- Use pci_try_reset_function() to reset the MHI function during recovery process
to avoid the deadlock reported on the X1E80100 CRD device. The deadlock can
happen if the caller has already acquired the 'device_lock()' while calling
the recovery function. So using pci_try_reset_function() avoids the deadlock
by returning -EAGAIN if the lock was already acquired.
* tag 'mhi-fixes-for-v6.14' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mani/mhi:
bus: mhi: host: pci_generic: Use pci_try_reset_function() to avoid deadlock
User-space cursor-image data is encoded in ARBG8888, while hardware
supports ARGB4444. Implement the format conversion as part of the
format-helper framework, so that other drivers can benefit.
This allows to respect the damage area of the cursor update. In
previous code, all cursor image data had to be converted on each
update. Now, only the changed areas require an update. The hardware
image is always updated completely, as it is required for the
checksum update.
The format-conversion helper still contains the old implementation's
optimization of writing 2 output pixels at the same time.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217122336.230067-3-tzimmermann@suse.de
Setting the cursor image requires a 32-bit checksum of the cursor
image data. The current cursor code converts the image to ARGB4444
format and computes the checksum in a single step. Moving the
checksum calculation into a separate helper will allow to move the
format conversion into a shared helper.
v2:
- don't loop for checksum'ing final pixel (Jocelyn)
- fix typo in commit message (Jocelyn)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217122336.230067-2-tzimmermann@suse.de
Bindings expect GPIO hog names to end with 'hog' suffix, so correct it
to fix dtbs_check warning:
vf610-zii-dev-rev-c.dtb: eth0_intrp: $nodename:0: 'eth0_intrp' does not match '^.+-hog(-[0-9]+)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Testing HDCP 1.4 becomes tough since the only way our code comes to
HDCP 1.4 pathway is if the monitor only supports HDCP 1.4 which
becomes tough to find sometimes.
Setting this debug_fs entry will force use to use the HDCP 1.4 path
so that more robust HDCP 1.4 testing can take place.
--v2
-Move the code to intel_hdcp.c [Jani]
-Remove useless debug logging [Jani]
-Remove Force_HDCP from the debug file [Jani]
--v3
-Remove leftover debug loggings [Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213082541.3772212-1-suraj.kandpal@intel.com
Previously static rate wasn't translated according to our PRM but simply
used the 4 lower bytes.
Correctly translate static rate value passed in AH creation attribute
according to our PRM expected values.
In addition change 800GB mapping to zero, which is the PRM
specified value.
Fixes: e126ba97db ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Link: https://patch.msgid.link/18ef4cc5396caf80728341eb74738cd777596f60.1739187089.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The idle governor provides the following per-idle state sysfs files:
* above - Indicates overshoots, where a more shallow state should have
been requested (if avaliale and enabled).
* below - Indicates undershoots, where a deeper state should have been
requested (if available and enabled).
These files offer valuable insights into how effectively the Linux kernel
idle governor selects idle states for a given workload. This commit adds
support for these files in turbostat.
Expose the contents of these files with the following naming convention:
* C1: The number of times the C1 state was requested (existing counter).
* C1+: The number of times the idle governor selected C1, but a deeper
idle state should have been selected instead.
* C1-: The number of times the idle governor selected C1, but a shallower
idle state should have been selected instead.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Jakub Kicinski says:
====================
selftests: drv-net: add a simple TSO test
Add a simple test for exercising TSO over tunnels.
Similarly to csum test we want to iterate over ip versions.
Rework how addresses are stored in env to make this easier.
====================
Link: https://patch.msgid.link/20250218225426.77726-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a simple test for TSO. Send a few MB of data and check device
stats to verify that the device was performing segmentation.
Do the same thing over a few tunnel types.
Injecting GSO packets directly would give us more ability to test
corner cases, but perhaps starting simple is good enough?
# ./ksft-net-drv/drivers/net/hw/tso.py
# Detected qstat for LSO wire-packets
KTAP version 1
1..14
ok 1 tso.ipv4 # SKIP Test requires IPv4 connectivity
ok 2 tso.vxlan4_ipv4 # SKIP Test requires IPv4 connectivity
ok 3 tso.vxlan6_ipv4 # SKIP Test requires IPv4 connectivity
ok 4 tso.vxlan_csum4_ipv4 # SKIP Test requires IPv4 connectivity
ok 5 tso.vxlan_csum6_ipv4 # SKIP Test requires IPv4 connectivity
ok 6 tso.gre4_ipv4 # SKIP Test requires IPv4 connectivity
ok 7 tso.gre6_ipv4 # SKIP Test requires IPv4 connectivity
ok 8 tso.ipv6
ok 9 tso.vxlan4_ipv6
ok 10 tso.vxlan6_ipv6
ok 11 tso.vxlan_csum4_ipv6
ok 12 tso.vxlan_csum6_ipv6
# Testing with mangleid enabled
ok 13 tso.gre4_ipv6
ok 14 tso.gre6_ipv6
# Totals: pass:7 fail:0 xfail:0 xpass:0 skip:7 error:0
Note that the test currently depends on the driver reporting
the LSO count via qstat, which appears to be relatively rare
(virtio, cisco/enic, sfc/efc; but virtio needs host support).
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250218225426.77726-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Looks like more and more tests want to iterate over IP version,
run the same test over ipv4 and ipv6. The current naming of
members in the env class makes it a bit awkward, we have
separate members for ipv4 and ipv6 parameters.
Store the parameters inside dicts, so that tests can easily
index them with ip version.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250218225426.77726-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We already record output of ip link for NETIF in env for easy access.
Record the detailed version. TSO test will want to know the max tso size.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20250218225426.77726-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Find out and record in env the name of the interface which remote host
will use for the IP address provided via config.
Interface name is useful for mausezahn and for setting up tunnels.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20250218225426.77726-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthieu Baerts says:
====================
mptcp: rx path refactor
Paolo worked on this RX path refactor for these two main reasons:
- Currently, the MPTCP RX path introduces quite a bit of 'exceptional'
accounting/locking processing WRT to plain TCP, adding up to the
implementation complexity in a miserable way.
- The performance gap WRT plain TCP for single subflow connections is
quite measurable.
The present refactor addresses both the above items: most of the
additional complexity is dropped, and single stream performances
increase measurably, from 55Gbps to 71Gbps in Paolo's loopback test.
As a reference, plain TCP was around 84Gbps on the same host.
The above comes to a price: the patch are invasive, even in subtle ways.
Note: patch 5/7 removes the sk_forward_alloc_get() helper, which caused
some trivial modifications in different places in the net tree: sockets,
IPv4, sched. That's why a few more people have been Cc here. Feel free
to only look at this patch 5/7.
====================
Link: https://patch.msgid.link/20250218-net-next-mptcp-rx-path-refactor-v1-0-4a47d90d7998@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After the RX path refactor the mentioned function is expected to run
frequently, let's optimize it a bit.
Scan for ready subflow from the last processed one, and stop after
traversing the list once or reaching the msk memory limit - instead of
looking for dubious per-subflow conditions.
Also re-order the memory limit checks, to avoid duplicate tests.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250218-net-next-mptcp-rx-path-refactor-v1-7-4a47d90d7998@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After the RX path refactor, it become a wrapper for sk_rmem_alloc
access, with a slightly misleading name. Just drop it.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250218-net-next-mptcp-rx-path-refactor-v1-6-4a47d90d7998@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After the previous patch we can remove the forward_alloc_get
proto callback, basically reverting commit 292e6077b0 ("net: introduce
sk_forward_alloc_get()") and commit 66d58f046c ("net: use
sk_forward_alloc_get() in sk_get_meminfo()").
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250218-net-next-mptcp-rx-path-refactor-v1-5-4a47d90d7998@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After the previous patch, updating sk_forward_memory is cheap and
we can drop a lot of complexity from the MPTCP memory accounting,
removing the custom fwd mem allocations for rmem.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250218-net-next-mptcp-rx-path-refactor-v1-4-4a47d90d7998@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After commit c2e6048fa1 ("mptcp: fix race in release_cb") we can
move the whole MPTCP rx path under the socket lock leveraging the
release_cb.
We can drop a bunch of spin_lock pairs in the receive functions, use
a single receive queue and invoke __mptcp_move_skbs only when subflows
ask for it.
This will allow more cleanup in the next patch.
Some changes are worth specific mention:
The msk rcvbuf update now always happens under both the msk and the
subflow socket lock: we can drop a bunch of ONCE annotation and
consolidate the checks.
When the skbs move is delayed at msk release callback time, even the
msk rcvbuf update is delayed; additionally take care of such action in
__mptcp_move_skbs().
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250218-net-next-mptcp-rx-path-refactor-v1-3-4a47d90d7998@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When we will move the whole RX path under the msk socket lock, updating
the already queued skb for passive fastopen socket at 3rd ack time will
be extremely painful and race prone
The map_seq for already enqueued skbs is used only to allow correct
coalescing with later data; preventing collapsing to the first skb of
a fastopen connect we can completely remove the
__mptcp_fastopen_gen_msk_ackseq() helper.
Before dropping this helper, a new item had to be added to the
mptcp_skb_cb structure. Because this item will be frequently tested in
the fast path -- almost on every packet -- and because there is free
space there, a single byte is used instead of a bitfield. This micro
optimisation slightly reduces the number of CPU operations to do the
associated check.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250218-net-next-mptcp-rx-path-refactor-v1-2-4a47d90d7998@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Consolidate all the cleanup actions requiring the worker in a single
helper and ensure the dummy data fin creation for fallback socket is
performed only when the tcp rx queue is empty.
There are no functional changes intended, but this will simplify the
next patch, when the tcp rx queue spooling could be delayed at release_cb
time.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250218-net-next-mptcp-rx-path-refactor-v1-1-4a47d90d7998@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
nfc_llc_unregister() has been unused since it was added in 2012's
commit 67cccfe17d ("NFC: Add an LLC Core layer to HCI")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250219020258.297995-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Breno Leitao says:
====================
net: core: improvements to device lookup by hardware address.
The first patch adds a new dev_getbyhwaddr() helper function for
finding devices by hardware address when the rtnl lock is held. This
prevents PROVE_LOCKING warnings that occurred when rtnl lock was held
but the RCU read lock wasn't. The common address comparison logic is
extracted into dev_comp_addr() to avoid code duplication.
The second coverts arp_req_set_public() to the new helper.
====================
Link: https://patch.msgid.link/20250218-arm_fix_selftest-v5-0-d3d6892db9e1@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The arp_req_set_public() function is called with the rtnl lock held,
which provides enough synchronization protection. This makes the RCU
variant of dev_getbyhwaddr() unnecessary. Switch to using the simpler
dev_getbyhwaddr() function since we already have the required rtnl
locking.
This change helps maintain consistency in the networking code by using
the appropriate helper function for the existing locking context.
Since we're not holding the RCU read lock in arp_req_set_public()
existing code could trigger false positive locking warnings.
Fixes: 941666c2e3 ("net: RCU conversion of dev_getbyhwaddr() and arp_ioctl()")
Suggested-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250218-arm_fix_selftest-v5-2-d3d6892db9e1@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: stmmac: further cleanups
This small series does further cleanups to the stmmac driver:
1. Name priv->pause to indicate that it's a timeout and clarify the
units of the "pause" module parameter
2. Remove useless priv->flow_ctrl member and deprecate the useless
"flow_ctrl" module parameter
3. Fix long-standing signed-ness issue with "speed" passed around the
driver from the mac_link_up method.
====================
Link: https://patch.msgid.link/Z7Rf2daOaf778TOg@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
priv->plat->fix_mac_speed() is called from stmmac_mac_link_up(), which
is passed the speed as an "int". However, fix_mac_speed() implicitly
casts this to an unsigned int. Some platform glue code print this value
using %u, others with %d. Some implicitly cast it back to an int, and
others to u32.
Good practice is to use one type and only one type to represent a value
being passed around a driver.
Switch all of these over to consistently use "int" when dealing with a
speed passed from stmmac_mac_link_up(), even though the speed will
always be positive.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Link: https://patch.msgid.link/E1tkKmN-004ObM-Ge@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
priv->flow_ctrl is only accessed by stmmac_main.c, and the only place
that it is read is in stmmac_mac_flow_ctrl(). This function is only
called from stmmac_mac_link_up() which always sets priv->flow_ctrl
immediately before calling this function.
Therefore, initialising this at probe time is ineffectual because it
will always be overwritten before it's read. As such, the "flow_ctrl"
module parameter has been useless for some time. Rather than remove
the module parameter, which would risk module load failure, change the
description to indicate that it is obsolete, and warn if it is set by
userspace.
Moreover, storing the value in the stmmac_priv has no benefit as it's
set and then immediately read stmmac_mac_flow_ctrl(). Instead, pass it
as a parameter to this function..
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Link: https://patch.msgid.link/E1tkKmI-004ObG-DL@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
priv->pause corresponds with "pause_time" in the 802.3 specification,
and is also called "pause_time" in the various MAC backends. For
consistency, use the same name in the core stmmac code.
Clarify the units of the "pause" module parameter which sets up this
struct member to indicate that it's in units of the pause_quanta
defined by 802.3, which is 512 bit times.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Link: https://patch.msgid.link/E1tkKmD-004ObA-9K@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
According to the C11 standard (ISO/IEC 9899:2011, 6.5.7):
"If E1 has a signed type and E1 x 2^E2 is not representable in the result
type, the behavior is undefined."
Shifting 1 << 31 causes signed integer overflow, which leads to undefined
behavior.
Fix this by explicitly using '1U << 31' to ensure the shift operates on
an unsigned type, avoiding undefined behavior.
Signed-off-by: Yu-Chun Lin <eleanor15x@gmail.com>
Link: https://patch.msgid.link/20250218081217.3468369-1-eleanor15x@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cong Wang says:
====================
flow_dissector: Fix handling of mixed port and port-range keys
This patchset contains two fixes for flow_dissector handling of mixed
port and port-range keys, for both tc-flower case and bpf case. Each
of them also comes with a selftest.
====================
Link: https://patch.msgid.link/20250218043210.732959-1-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix how port range keys are handled in __skb_flow_bpf_to_target() by:
- Separating PORTS and PORTS_RANGE key handling
- Using correct key_ports_range structure for range keys
- Properly initializing both key types independently
This ensures port range information is correctly stored in its dedicated
structure rather than incorrectly using the regular ports key structure.
Fixes: 59fb9b62fb ("flow_dissector: Fix to use new variables for port ranges in bpf hook")
Reported-by: Qiang Zhang <dtzq01@gmail.com>
Closes: https://lore.kernel.org/netdev/CAPx+-5uvFxkhkz4=j_Xuwkezjn9U6kzKTD5jz4tZ9msSJ0fOJA@mail.gmail.com/
Cc: Yoshiki Komachi <komachi.yoshiki@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://patch.msgid.link/20250218043210.732959-4-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After this patch:
# ./tc_flower_port_range.sh
TEST: Port range matching - IPv4 UDP [ OK ]
TEST: Port range matching - IPv4 TCP [ OK ]
TEST: Port range matching - IPv6 UDP [ OK ]
TEST: Port range matching - IPv6 TCP [ OK ]
TEST: Port range matching - IPv4 UDP Drop [ OK ]
Cc: Qiang Zhang <dtzq01@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250218043210.732959-3-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch fixes a bug in TC flower filter where rules combining a
specific destination port with a source port range weren't working
correctly.
The specific case was when users tried to configure rules like:
tc filter add dev ens38 ingress protocol ip flower ip_proto udp \
dst_port 5000 src_port 2000-3000 action drop
The root cause was in the flow dissector code. While both
FLOW_DISSECTOR_KEY_PORTS and FLOW_DISSECTOR_KEY_PORTS_RANGE flags
were being set correctly in the classifier, the __skb_flow_dissect_ports()
function was only populating one of them: whichever came first in
the enum check. This meant that when the code needed both a specific
port and a port range, one of them would be left as 0, causing the
filter to not match packets as expected.
Fix it by removing the either/or logic and instead checking and
populating both key types independently when they're in use.
Fixes: 8ffb055bea ("cls_flower: Fix the behavior using port ranges with hw-offload")
Reported-by: Qiang Zhang <dtzq01@gmail.com>
Closes: https://lore.kernel.org/netdev/CAPx+-5uvFxkhkz4=j_Xuwkezjn9U6kzKTD5jz4tZ9msSJ0fOJA@mail.gmail.com/
Cc: Yoshiki Komachi <komachi.yoshiki@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250218043210.732959-2-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add more logs to assist in debugging and monitoring
driver behaviour, making it easier to identify potential
issues during development and testing.
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/1739842455-23899-1-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima says:
====================
gtp/geneve: Suppress list_del() splat during ->exit_batch_rtnl().
The common pattern in tunnel device's ->exit_batch_rtnl() is iterating
two netdev lists for each netns: (i) for_each_netdev() to clean up
devices in the netns, and (ii) the device type specific list to clean
up devices in other netns.
list_for_each_entry(net, net_list, exit_list) {
for_each_netdev_safe(net, dev, next) {
/* (i) call unregister_netdevice_queue(dev, list) */
}
list_for_each_entry_safe(xxx, xxx_next, &net->yyy, zzz) {
/* (ii) call unregister_netdevice_queue(xxx->dev, list) */
}
}
Then, ->exit_batch_rtnl() could touch the same device twice.
Say we have two netns A & B and device B that is created in netns A and
moved to netns B.
1. cleanup_net() processes netns A and then B.
2. ->exit_batch_rtnl() finds the device B while iterating netns A's (ii)
[ device B is not yet unlinked from netns B as
unregister_netdevice_many() has not been called. ]
3. ->exit_batch_rtnl() finds the device B while iterating netns B's (i)
gtp and geneve calls ->dellink() at 2. and 3. that calls list_del() for (ii)
and unregister_netdevice_queue().
Calling unregister_netdevice_queue() twice is fine because it uses
list_move_tail(), but the 2nd list_del() triggers a splat when
CONFIG_DEBUG_LIST is enabled.
Possible solution is either of
(a) Use list_del_init() in ->dellink()
(b) Iterate dev with empty ->unreg_list for (i) like
#define for_each_netdev_alive(net, d) \
list_for_each_entry(d, &(net)->dev_base_head, dev_list) \
if (list_empty(&d->unreg_list))
(c) Remove (i) and delegate it to default_device_exit_batch().
This series avoids the 2nd ->dellink() by (c) to suppress the splat for
gtp and geneve.
Note that IPv4/IPv6 tunnels calls just unregister_netdevice() during
->exit_batch_rtnl() and dev is unlinked from (ii) later in ->ndo_uninit(),
so they are safe.
Also, pfcp has the same pattern but is safe because
unregister_netdevice_many() is called for each netns.
====================
Link: https://patch.msgid.link/20250217203705.40342-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As explained in the previous patch, iterating for_each_netdev() and
gn->geneve_list during ->exit_batch_rtnl() could trigger ->dellink()
twice for the same device.
If CONFIG_DEBUG_LIST is enabled, we will see a list_del() corruption
splat in the 2nd call of geneve_dellink().
Let's remove for_each_netdev() in geneve_destroy_tunnels() and delegate
that part to default_device_exit_batch().
Fixes: 9593172d93 ("geneve: Fix use-after-free in geneve_find_dev().")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250217203705.40342-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel says:
====================
net: fib_rules: Add port mask support
In some deployments users would like to encode path information into
certain bits of the IPv6 flow label, the UDP source port and the DSCP
field and use this information to route packets accordingly.
Redirecting traffic to a routing table based on specific bits in the UDP
source port is not currently possible. Only exact match and range are
currently supported by FIB rules.
This patchset extends FIB rules to match on layer 4 ports with an
optional mask. The mask is not supported when matching on a range. A
future patchset will add support for matching on the DSCP field with an
optional mask.
Patches #1-#6 gradually extend FIB rules to match on layer 4 ports with
an optional mask.
Patches #7-#8 add test cases for FIB rule port matching.
iproute2 support can be found here [1].
[1] https://github.com/idosch/iproute2/tree/submit/fib_rule_mask_v1
====================
Link: https://patch.msgid.link/20250217134109.311176-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>